/* Copyright (c) 1992-1999, Microsoft Corporation, all rights reserved ** ** raserror.h ** Remote Access external API ** RAS specific error codes */ #ifndef _RASERROR_H_ #pragma option push -b -a8 -pc -A- /*P_O_Push*/ #define _RASERROR_H_ #if _MSC_VER > 1000 #pragma once #endif #define RASBASE 600 #define SUCCESS 0 #define PENDING (RASBASE+0) /* * An operation is pending.%0 */ #define ERROR_INVALID_PORT_HANDLE (RASBASE+1) /* * An invalid port handle was detected.%0 */ #define ERROR_PORT_ALREADY_OPEN (RASBASE+2) /* * The specified port is already open.%0 */ #define ERROR_BUFFER_TOO_SMALL (RASBASE+3) /* * The caller's buffer is too small.%0 */ #define ERROR_WRONG_INFO_SPECIFIED (RASBASE+4) /* * Incorrect information was specified.%0 */ #define ERROR_CANNOT_SET_PORT_INFO (RASBASE+5) /* * The port information cannot be set.%0 */ #define ERROR_PORT_NOT_CONNECTED (RASBASE+6) /* * The specified port is not connected.%0 */ #define ERROR_EVENT_INVALID (RASBASE+7) /* * An invalid event was detected.%0 */ #define ERROR_DEVICE_DOES_NOT_EXIST (RASBASE+8) /* * A device was specified that does not exist.%0 */ #define ERROR_DEVICETYPE_DOES_NOT_EXIST (RASBASE+9) /* * A device type was specified that does not exist.%0 */ #define ERROR_BUFFER_INVALID (RASBASE+10) /* * An invalid buffer was specified.%0 */ #define ERROR_ROUTE_NOT_AVAILABLE (RASBASE+11) /* * A route was specified that is not available.%0 */ #define ERROR_ROUTE_NOT_ALLOCATED (RASBASE+12) /* * A route was specified that is not allocated.%0 */ #define ERROR_INVALID_COMPRESSION_SPECIFIED (RASBASE+13) /* * An invalid compression was specified.%0 */ #define ERROR_OUT_OF_BUFFERS (RASBASE+14) /* * There were insufficient buffers available.%0 */ #define ERROR_PORT_NOT_FOUND (RASBASE+15) /* * The specified port was not found.%0 */ #define ERROR_ASYNC_REQUEST_PENDING (RASBASE+16) /* * An asynchronous request is pending.%0 */ #define ERROR_ALREADY_DISCONNECTING (RASBASE+17) /* * The modem (or other connecting device) is already disconnecting.%0 */ #define ERROR_PORT_NOT_OPEN (RASBASE+18) /* * The specified port is not open.%0 */ #define ERROR_PORT_DISCONNECTED (RASBASE+19) /* * The specified port is not connected.%0 */ #define ERROR_NO_ENDPOINTS (RASBASE+20) /* * No endpoints could be determined.%0 */ #define ERROR_CANNOT_OPEN_PHONEBOOK (RASBASE+21) /* * The system could not open the phone book file.%0 */ #define ERROR_CANNOT_LOAD_PHONEBOOK (RASBASE+22) /* * The system could not load the phone book file.%0 */ #define ERROR_CANNOT_FIND_PHONEBOOK_ENTRY (RASBASE+23) /* * The system could not find the phone book entry for this connection.%0 */ #define ERROR_CANNOT_WRITE_PHONEBOOK (RASBASE+24) /* * The system could not update the phone book file.%0 */ #define ERROR_CORRUPT_PHONEBOOK (RASBASE+25) /* * The system found invalid information in the phone book file.%0 */ #define ERROR_CANNOT_LOAD_STRING (RASBASE+26) /* * A string could not be loaded.%0 */ #define ERROR_KEY_NOT_FOUND (RASBASE+27) /* * A key could not be found.%0 */ #define ERROR_DISCONNECTION (RASBASE+28) /* * The connection was closed.%0 */ #define ERROR_REMOTE_DISCONNECTION (RASBASE+29) /* * The connection was closed by the remote computer.%0 */ #define ERROR_HARDWARE_FAILURE (RASBASE+30) /* * The modem (or other connecting device) was disconnected due to hardware failure.%0 */ #define ERROR_USER_DISCONNECTION (RASBASE+31) /* * The user disconnected the modem (or other connecting device).%0 */ #define ERROR_INVALID_SIZE (RASBASE+32) /* * An incorrect structure size was detected.%0 */ #define ERROR_PORT_NOT_AVAILABLE (RASBASE+33) /* * The modem (or other connecting device) is already in use or is not configured properly.%0 */ #define ERROR_CANNOT_PROJECT_CLIENT (RASBASE+34) /* * Your computer could not be registered on the remote network.%0 */ #define ERROR_UNKNOWN (RASBASE+35) /* * There was an unknown error.%0 */ #define ERROR_WRONG_DEVICE_ATTACHED (RASBASE+36) /* * The device attached to the port is not the one expected.%0 */ #define ERROR_BAD_STRING (RASBASE+37) /* * A string was detected that could not be converted.%0 */ #define ERROR_REQUEST_TIMEOUT (RASBASE+38) /* * The request has timed out.%0 */ #define ERROR_CANNOT_GET_LANA (RASBASE+39) /* * No asynchronous net is available.%0 */ #define ERROR_NETBIOS_ERROR (RASBASE+40) /* * An error has occurred involving NetBIOS.%0 */ #define ERROR_SERVER_OUT_OF_RESOURCES (RASBASE+41) /* * The server cannot allocate NetBIOS resources needed to support the client.%0 */ #define ERROR_NAME_EXISTS_ON_NET (RASBASE+42) /* * One of your computer's NetBIOS names is already registered on the remote network.%0 */ #define ERROR_SERVER_GENERAL_NET_FAILURE (RASBASE+43) /* * A network adapter at the server failed.%0 */ #define WARNING_MSG_ALIAS_NOT_ADDED (RASBASE+44) /* * You will not receive network message popups.%0 */ #define ERROR_AUTH_INTERNAL (RASBASE+45) /* * There was an internal authentication error.%0 */ #define ERROR_RESTRICTED_LOGON_HOURS (RASBASE+46) /* * The account is not permitted to log on at this time of day.%0 */ #define ERROR_ACCT_DISABLED (RASBASE+47) /* * The account is disabled.%0 */ #define ERROR_PASSWD_EXPIRED (RASBASE+48) /* * The password for this account has expired.%0 */ #define ERROR_NO_DIALIN_PERMISSION (RASBASE+49) /* * The account does not have permission to dial in.%0 */ #define ERROR_SERVER_NOT_RESPONDING (RASBASE+50) /* * The remote access server is not responding.%0 */ #define ERROR_FROM_DEVICE (RASBASE+51) /* * The modem (or other connecting device) has reported an error.%0 */ #define ERROR_UNRECOGNIZED_RESPONSE (RASBASE+52) /* * There was an unrecognized response from the modem (or other connecting device).%0 */ #define ERROR_MACRO_NOT_FOUND (RASBASE+53) /* * A macro required by the modem (or other connecting device) was not found in the device.INF file.%0 */ #define ERROR_MACRO_NOT_DEFINED (RASBASE+54) /* * A command or response in the device.INF file section refers to an undefined macro.%0 */ #define ERROR_MESSAGE_MACRO_NOT_FOUND (RASBASE+55) /* * The macro was not found in the device.INF file section.%0 */ #define ERROR_DEFAULTOFF_MACRO_NOT_FOUND (RASBASE+56) /* * The macro in the device.INF file section contains an undefined macro.%0 */ #define ERROR_FILE_COULD_NOT_BE_OPENED (RASBASE+57) /* * The device.INF file could not be opened.%0 */ #define ERROR_DEVICENAME_TOO_LONG (RASBASE+58) /* * The device name in the device.INF or media.INI file is too long.%0 */ #define ERROR_DEVICENAME_NOT_FOUND (RASBASE+59) /* * The media.INI file refers to an unknown device name.%0 */ #define ERROR_NO_RESPONSES (RASBASE+60) /* * The device.INF file contains no responses for the command.%0 */ #define ERROR_NO_COMMAND_FOUND (RASBASE+61) /* * The device.INF file is missing a command.%0 */ #define ERROR_WRONG_KEY_SPECIFIED (RASBASE+62) /* * There was an attempt to set a macro not listed in device.INF file section.%0 */ #define ERROR_UNKNOWN_DEVICE_TYPE (RASBASE+63) /* * The media.INI file refers to an unknown device type.%0 */ #define ERROR_ALLOCATING_MEMORY (RASBASE+64) /* * The system has run out of memory.%0 */ #define ERROR_PORT_NOT_CONFIGURED (RASBASE+65) /* * The modem (or other connecting device) is not properly configured.%0 */ #define ERROR_DEVICE_NOT_READY (RASBASE+66) /* * The modem (or other connecting device) is not functioning.%0 */ #define ERROR_READING_INI_FILE (RASBASE+67) /* * The system was unable to read the media.INI file.%0 */ #define ERROR_NO_CONNECTION (RASBASE+68) /* * The connection was terminated.%0 */ #define ERROR_BAD_USAGE_IN_INI_FILE (RASBASE+69) /* * The usage parameter in the media.INI file is invalid.%0 */ #define ERROR_READING_SECTIONNAME (RASBASE+70) /* * The system was unable to read the section name from the media.INI file.%0 */ #define ERROR_READING_DEVICETYPE (RASBASE+71) /* * The system was unable to read the device type from the media.INI file.%0 */ #define ERROR_READING_DEVICENAME (RASBASE+72) /* * The system was unable to read the device name from the media.INI file.%0 */ #define ERROR_READING_USAGE (RASBASE+73) /* * The system was unable to read the usage from the media.INI file.%0 */ #define ERROR_READING_MAXCONNECTBPS (RASBASE+74) /* * The system was unable to read the maximum connection BPS rate from the media.INI file.%0 */ #define ERROR_READING_MAXCARRIERBPS (RASBASE+75) /* * The system was unable to read the maximum carrier connection speed from the media.INI file.%0 */ #define ERROR_LINE_BUSY (RASBASE+76) /* * The phone line is busy.%0 */ #define ERROR_VOICE_ANSWER (RASBASE+77) /* * A person answered instead of a modem (or other connecting device).%0 */ #define ERROR_NO_ANSWER (RASBASE+78) /* * There was no answer.%0 */ #define ERROR_NO_CARRIER (RASBASE+79) /* * The system could not detect the carrier.%0 */ #define ERROR_NO_DIALTONE (RASBASE+80) /* * There was no dial tone.%0 */ #define ERROR_IN_COMMAND (RASBASE+81) /* * The modem (or other connecting device) reported a general error.%0 */ #define ERROR_WRITING_SECTIONNAME (RASBASE+82) /* * There was an error in writing the section name.%0 */ #define ERROR_WRITING_DEVICETYPE (RASBASE+83) /* * There was an error in writing the device type.%0 */ #define ERROR_WRITING_DEVICENAME (RASBASE+84) /* * There was an error in writing the device name.%0 */ #define ERROR_WRITING_MAXCONNECTBPS (RASBASE+85) /* * There was an error in writing the maximum connection speed. */ #define ERROR_WRITING_MAXCARRIERBPS (RASBASE+86) /* * There was an error in writing the maximum carrier speed.%0 */ #define ERROR_WRITING_USAGE (RASBASE+87) /* * There was an error in writing the usage.%0 */ #define ERROR_WRITING_DEFAULTOFF (RASBASE+88) /* * There was an error in writing the default-off.%0 */ #define ERROR_READING_DEFAULTOFF (RASBASE+89) /* * There was an error in reading the default-off.%0 */ #define ERROR_EMPTY_INI_FILE (RASBASE+90) /* * ERROR_EMPTY_INI_FILE%0 */ #define ERROR_AUTHENTICATION_FAILURE (RASBASE+91) /* * Access was denied because the username and/or password was invalid on the domain.%0 */ #define ERROR_PORT_OR_DEVICE (RASBASE+92) /* * There was a hardware failure in the modem (or other connecting device).%0 */ #define ERROR_NOT_BINARY_MACRO (RASBASE+93) /* * ERROR_NOT_BINARY_MACRO%0 */ #define ERROR_DCB_NOT_FOUND (RASBASE+94) /* * ERROR_DCB_NOT_FOUND%0 */ #define ERROR_STATE_MACHINES_NOT_STARTED (RASBASE+95) /* * The state machines are not started.%0 */ #define ERROR_STATE_MACHINES_ALREADY_STARTED (RASBASE+96) /* * The state machines are already started.%0 */ #define ERROR_PARTIAL_RESPONSE_LOOPING (RASBASE+97) /* * The response looping did not complete.%0 */ #define ERROR_UNKNOWN_RESPONSE_KEY (RASBASE+98) /* * A response keyname in the device.INF file is not in the expected format.%0 */ #define ERROR_RECV_BUF_FULL (RASBASE+99) /* * The modem (or other connecting device) response caused a buffer overflow.%0 */ #define ERROR_CMD_TOO_LONG (RASBASE+100) /* * The expanded command in the device.INF file is too long.%0 */ #define ERROR_UNSUPPORTED_BPS (RASBASE+101) /* * The modem moved to a connection speed not supported by the COM driver.%0 */ #define ERROR_UNEXPECTED_RESPONSE (RASBASE+102) /* * Device response received when none expected.%0 */ #define ERROR_INTERACTIVE_MODE (RASBASE+103) /* * The connection needs information from you, but the application does not allow user interaction.%0 */ #define ERROR_BAD_CALLBACK_NUMBER (RASBASE+104) /* * The callback number is invalid.%0 */ #define ERROR_INVALID_AUTH_STATE (RASBASE+105) /* * The authorization state is invalid.%0 */ #define ERROR_WRITING_INITBPS (RASBASE+106) /* * ERROR_WRITING_INITBPS%0 */ #define ERROR_X25_DIAGNOSTIC (RASBASE+107) /* * There was an error related to the X.25 protocol.%0 */ #define ERROR_ACCT_EXPIRED (RASBASE+108) /* * The account has expired.%0 */ #define ERROR_CHANGING_PASSWORD (RASBASE+109) /* * There was an error changing the password on the domain. The password might have been too short or might have matched a previously used password.%0 */ #define ERROR_OVERRUN (RASBASE+110) /* * Serial overrun errors were detected while communicating with the modem.%0 */ #define ERROR_RASMAN_CANNOT_INITIALIZE (RASBASE+111) /* * The Remote Access Service Manager could not start. Additional information is provided in the event log.%0 */ #define ERROR_BIPLEX_PORT_NOT_AVAILABLE (RASBASE+112) /* * The two-way port is initializing. Wait a few seconds and redial.%0 */ #define ERROR_NO_ACTIVE_ISDN_LINES (RASBASE+113) /* * No active ISDN lines are available.%0 */ #define ERROR_NO_ISDN_CHANNELS_AVAILABLE (RASBASE+114) /* * No ISDN channels are available to make the call.%0 */ #define ERROR_TOO_MANY_LINE_ERRORS (RASBASE+115) /* * Too many errors occurred because of poor phone line quality.%0 */ #define ERROR_IP_CONFIGURATION (RASBASE+116) /* * The Remote Access Service IP configuration is unusable.%0 */ #define ERROR_NO_IP_ADDRESSES (RASBASE+117) /* * No IP addresses are available in the static pool of Remote Access Service IP addresses.%0 */ #define ERROR_PPP_TIMEOUT (RASBASE+118) /* * The connection timed out waiting for a valid response from the remote computer.%0 */ #define ERROR_PPP_REMOTE_TERMINATED (RASBASE+119) /* * The connection was terminated by the remote computer.%0 */ #define ERROR_PPP_NO_PROTOCOLS_CONFIGURED (RASBASE+120) /* * The connection attempt failed because your computer and the remote computer could not agree on PPP control protocols.%0 */ #define ERROR_PPP_NO_RESPONSE (RASBASE+121) /* * The remote computer is not responding.%0 */ #define ERROR_PPP_INVALID_PACKET (RASBASE+122) /* * Invalid data was received from the remote computer. This data was ignored.%0 */ #define ERROR_PHONE_NUMBER_TOO_LONG (RASBASE+123) /* * The phone number, including prefix and suffix, is too long.%0 */ #define ERROR_IPXCP_NO_DIALOUT_CONFIGURED (RASBASE+124) /* * The IPX protocol cannot dial out on the modem (or other connecting device) because this computer is not configured for dialing out (it is an IPX router).%0 */ #define ERROR_IPXCP_NO_DIALIN_CONFIGURED (RASBASE+125) /* * The IPX protocol cannot dial in on the modem (or other connecting device) because this computer is not configured for dialing in (the IPX router is not installed).%0 */ #define ERROR_IPXCP_DIALOUT_ALREADY_ACTIVE (RASBASE+126) /* * The IPX protocol cannot be used for dialing out on more than one modem (or other connecting device) at a time.%0 */ #define ERROR_ACCESSING_TCPCFGDLL (RASBASE+127) /* * Cannot access TCPCFG.DLL.%0 */ #define ERROR_NO_IP_RAS_ADAPTER (RASBASE+128) /* * The system cannot find an IP adapter.%0 */ #define ERROR_SLIP_REQUIRES_IP (RASBASE+129) /* * SLIP cannot be used unless the IP protocol is installed.%0 */ #define ERROR_PROJECTION_NOT_COMPLETE (RASBASE+130) /* * Computer registration is not complete.%0 */ #define ERROR_PROTOCOL_NOT_CONFIGURED (RASBASE+131) /* * The protocol is not configured.%0 */ #define ERROR_PPP_NOT_CONVERGING (RASBASE+132) /* *Your computer and the remote computer could not agree on PPP control protocols.%0 */ #define ERROR_PPP_CP_REJECTED (RASBASE+133) /* * Your computer and the remote computer could not agree on PPP control protocols.%0 */ #define ERROR_PPP_LCP_TERMINATED (RASBASE+134) /* * The PPP link control protocol was terminated.%0 */ #define ERROR_PPP_REQUIRED_ADDRESS_REJECTED (RASBASE+135) /* * The requested address was rejected by the server.%0 */ #define ERROR_PPP_NCP_TERMINATED (RASBASE+136) /* * The remote computer terminated the control protocol.%0 */ #define ERROR_PPP_LOOPBACK_DETECTED (RASBASE+137) /* * Loopback was detected.%0 */ #define ERROR_PPP_NO_ADDRESS_ASSIGNED (RASBASE+138) /* * The server did not assign an address.%0 */ #define ERROR_CANNOT_USE_LOGON_CREDENTIALS (RASBASE+139) /* * The authentication protocol required by the remote server cannot use the stored password. Redial, entering the password explicitly.%0 */ #define ERROR_TAPI_CONFIGURATION (RASBASE+140) /* * An invalid dialing rule was detected.%0 */ #define ERROR_NO_LOCAL_ENCRYPTION (RASBASE+141) /* * The local computer does not support the required data encryption type.%0 */ #define ERROR_NO_REMOTE_ENCRYPTION (RASBASE+142) /* * The remote computer does not support the required data encryption type.%0 */ #define ERROR_REMOTE_REQUIRES_ENCRYPTION (RASBASE+143) /* * The remote computer requires data encryption.%0 */ #define ERROR_IPXCP_NET_NUMBER_CONFLICT (RASBASE+144) /* * The system cannot use the IPX network number assigned by the remote computer. Additional information is provided in the event log.%0 */ #define ERROR_INVALID_SMM (RASBASE+145) /* * ERROR_INVALID_SMM%0 */ #define ERROR_SMM_UNINITIALIZED (RASBASE+146) /* * ERROR_SMM_UNINITIALIZED%0 */ #define ERROR_NO_MAC_FOR_PORT (RASBASE+147) /* * ERROR_NO_MAC_FOR_PORT%0 */ #define ERROR_SMM_TIMEOUT (RASBASE+148) /* * ERROR_SMM_TIMEOUT%0 */ #define ERROR_BAD_PHONE_NUMBER (RASBASE+149) /* * ERROR_BAD_PHONE_NUMBER%0 */ #define ERROR_WRONG_MODULE (RASBASE+150) /* * ERROR_WRONG_MODULE%0 */ #define ERROR_INVALID_CALLBACK_NUMBER (RASBASE+151) /* * The callback number contains an invalid character. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space.%0 */ #define ERROR_SCRIPT_SYNTAX (RASBASE+152) /* * A syntax error was encountered while processing a script.%0 */ #define ERROR_HANGUP_FAILED (RASBASE+153) /* * The connection could not be disconnected because it was created by the multi-protocol router.%0 */ #define ERROR_BUNDLE_NOT_FOUND (RASBASE+154) /* * The system could not find the multi-link bundle.%0 */ #define ERROR_CANNOT_DO_CUSTOMDIAL (RASBASE+155) /* * The system cannot perform automated dial because this connection has a custom dialer specified.%0 */ #define ERROR_DIAL_ALREADY_IN_PROGRESS (RASBASE+156) /* * This connection is already being dialed.%0 */ #define ERROR_RASAUTO_CANNOT_INITIALIZE (RASBASE+157) /* * Remote Access Services could not be started automatically. Additional information is provided in the event log.%0 */ #define ERROR_CONNECTION_ALREADY_SHARED (RASBASE+158) /* * Internet Connection Sharing is already enabled on the connection.%0 */ #define ERROR_SHARING_CHANGE_FAILED (RASBASE+159) /* * An error occurred while the existing Internet Connection Sharing * settings were being changed.%0 */ #define ERROR_SHARING_ROUTER_INSTALL (RASBASE+160) /* * An error occurred while routing capabilities were being enabled.%0 */ #define ERROR_SHARE_CONNECTION_FAILED (RASBASE+161) /* * An error occurred while Internet Connection Sharing was being enabled * for the connection.%0 */ #define ERROR_SHARING_PRIVATE_INSTALL (RASBASE+162) /* * An error occurred while the local network was being configured for sharing.%0 */ #define ERROR_CANNOT_SHARE_CONNECTION (RASBASE+163) /* * Internet Connection Sharing cannot be enabled. * There is more than one LAN connection other than the connection * to be shared.%0 */ #define ERROR_NO_SMART_CARD_READER (RASBASE+164) /* * No smart card reader is installed.%0 */ #define ERROR_SHARING_ADDRESS_EXISTS (RASBASE+165) /* * Internet Connection Sharing cannot be enabled. * A LAN connection is already configured with the IP address * that is required for automatic IP addressing.%0 */ #define ERROR_NO_CERTIFICATE (RASBASE+166) /* * A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.%0 */ #define ERROR_SHARING_MULTIPLE_ADDRESSES (RASBASE+167) /* * Internet Connection Sharing cannot be enabled. The LAN connection selected * as the private network has more than one IP address configured. * Please reconfigure the LAN connection with a single IP address * before enabling Internet Connection Sharing.%0 */ #define ERROR_FAILED_TO_ENCRYPT (RASBASE+168) /* * The connection attempt failed because of failure to encrypt data.%0 */ #define ERROR_BAD_ADDRESS_SPECIFIED (RASBASE+169) /* * The specified destination is not reachable.%0 */ #define ERROR_CONNECTION_REJECT (RASBASE+170) /* * The remote computer rejected the connection attempt.%0 */ #define ERROR_CONGESTION (RASBASE+171) /* * The connection attempt failed because the network is busy.%0 */ #define ERROR_INCOMPATIBLE (RASBASE+172) /* * The remote computer's network hardware is incompatible with the type of call requested.%0 */ #define ERROR_NUMBERCHANGED (RASBASE+173) /* * The connection attempt failed because the destination number has changed.%0 */ #define ERROR_TEMPFAILURE (RASBASE+174) /* * The connection attempt failed because of a temporary failure. Try connecting again.%0 */ #define ERROR_BLOCKED (RASBASE+175) /* * The call was blocked by the remote computer.%0 */ #define ERROR_DONOTDISTURB (RASBASE+176) /* * The call could not be connected because the remote computer has invoked the Do Not Disturb feature.%0 */ #define ERROR_OUTOFORDER (RASBASE+177) /* * The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order.%0 */ #define ERROR_UNABLE_TO_AUTHENTICATE_SERVER (RASBASE+178) /* * It was not possible to verify the identity of the server.%0 */ #define ERROR_SMART_CARD_REQUIRED (RASBASE+179) /* * To dial out using this connection you must use a smart card.%0 */ #define ERROR_INVALID_FUNCTION_FOR_ENTRY (RASBASE+180) /* * An attempted function is not valid for this connection.%0 */ #define ERROR_CERT_FOR_ENCRYPTION_NOT_FOUND (RASBASE+181) /* * The encryption attempt failed because no valid certificate was found.%0 */ #define ERROR_SHARING_RRAS_CONFLICT (RASBASE+182) /* * Connection Sharing (NAT) is currently installed as a routing protocol, and must be * removed before enabling Internet Connection Sharing.%0 */ #define ERROR_SHARING_NO_PRIVATE_LAN (RASBASE+183) /* * Internet Connection Sharing cannot be enabled. The LAN connection selected * as the private network is either not present, or is disconnected * from the network. Please ensure that the LAN adapter is connected * before enabling Internet Connection Sharing.%0 */ #define ERROR_NO_DIFF_USER_AT_LOGON (RASBASE+184) /* * You cannot dial using this connection at logon time, because it is * configured to use a user name different than the one on the smart * card. If you want to use it at logon time, you must configure it to * use the user name on the smart card.%0 */ #define ERROR_NO_REG_CERT_AT_LOGON (RASBASE+185) /* * You cannot dial using this connection at logon time, because it is * not configured to use a smart card. If you want to use it at logon * time, you must edit the properties of this connection so that it uses * a smart card.%0 */ #define ERROR_OAKLEY_NO_CERT (RASBASE+186) /* * The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.%0 */ #define ERROR_OAKLEY_AUTH_FAIL (RASBASE+187) /* * The L2TP connection attempt failed because the security layer could not authenticate the remote computer.%0 */ #define ERROR_OAKLEY_ATTRIB_FAIL (RASBASE+188) /* * The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.%0 */ #define ERROR_OAKLEY_GENERAL_PROCESSING (RASBASE+189) /* * The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.%0 */ #define ERROR_OAKLEY_NO_PEER_CERT (RASBASE+190) /* * The L2TP connection attempt failed because certificate validation on the remote computer failed.%0 */ #define ERROR_OAKLEY_NO_POLICY (RASBASE+191) /* * The L2TP connection attempt failed because security policy for the connection was not found.%0 */ #define ERROR_OAKLEY_TIMED_OUT (RASBASE+192) /* * The L2TP connection attempt failed because security negotiation timed out.%0 */ #define ERROR_OAKLEY_ERROR (RASBASE+193) /* * The L2TP connection attempt failed because an error occurred while negotiating security.%0 */ #define ERROR_UNKNOWN_FRAMED_PROTOCOL (RASBASE+194) /* * The Framed Protocol RADIUS attribute for this user is not PPP.%0 */ #define ERROR_WRONG_TUNNEL_TYPE (RASBASE+195) /* * The Tunnel Type RADIUS attribute for this user is not correct.%0 */ #define ERROR_UNKNOWN_SERVICE_TYPE (RASBASE+196) /* * The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.%0 */ #define ERROR_CONNECTING_DEVICE_NOT_FOUND (RASBASE+197) /* * The connection failed because the modem (or other connecting device) was not found. Please make sure that the modem or other connecting device is installed.%0 */ #define ERROR_NO_EAPTLS_CERTIFICATE (RASBASE+198) /* * A certificate could not be found that can be used with this Extensible Authentication Protocol.%0 */ #define RASBASEEND (RASBASE+198) #pragma option pop /*P_O_Pop*/ #endif // _RASERROR_H_