/* * scsiscan.h SCSI scanner definitions * * ========================================================================= * * Open Watcom Project * * Copyright (c) 2004-2010 The Open Watcom Contributors. All Rights Reserved. * * This file is automatically generated. Do not edit directly. * * ========================================================================= */ #ifndef _SCSISCAN_H_ #define _SCSISCAN_H_ #ifndef _ENABLE_AUTODEPEND #pragma read_only_file; #endif #ifdef __cplusplus extern "C" { #endif /* SCSI request block flags */ #define SRB_FLAGS_DISABLE_SYNCH_TRANSFER 0x00000008L #define SRB_FLAGS_DISABLE_AUTOSENSE 0x00000020L #define SRB_FLAGS_DATA_IN 0x00000040L #define SRB_FLAGS_DATA_OUT 0x00000080L #define SRB_FLAGS_NO_DATA_TRANSFER 0x00000000L /* SCSI request block status codes */ #define SRB_STATUS_PENDING 0x00 #define SRB_STATUS_SUCCESS 0x01 #define SRB_STATUS_ABORTED 0x02 #define SRB_STATUS_ABORT_FAILED 0x03 #define SRB_STATUS_ERROR 0x04 #define SRB_STATUS_BUSY 0x05 #define SRB_STATUS_INVALID_REQUEST 0x06 #define SRB_STATUS_INVALID_PATH_ID 0x07 #define SRB_STATUS_NO_DEVICE 0x08 #define SRB_STATUS_TIMEOUT 0x09 #define SRB_STATUS_SELECTION_TIMEOUT 0x0A #define SRB_STATUS_COMMAND_TIMEOUT 0x0B #define SRB_STATUS_MESSAGE_REJECTED 0x0D #define SRB_STATUS_BUS_RESET 0x0E #define SRB_STATUS_PARITY_ERROR 0x0F #define SRB_STATUS_REQUEST_SENSE_FAILED 0x10 #define SRB_STATUS_NO_HBA 0x11 #define SRB_STATUS_DATA_OVERRUN 0x12 #define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15 #define SRB_STATUS_REQUEST_FLUSHED 0x16 #define SRB_STATUS_INVALID_LUN 0x20 #define SRB_STATUS_INVALID_TARGET_ID 0x21 #define SRB_STATUS_BAD_FUNCTION 0x22 #define SRB_STATUS_ERROR_RECOVERY 0x23 #define SRB_STATUS_QUEUE_FROZEN 0x40 #define SRB_STATUS_AUTOSENSE_VALID 0x80 #define SRB_STATUS( x ) \ ((x) & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN)) /* Maximum string length */ #define MAX_STRING 128 /* SCSI scanner commands */ #define SCSISCAN_CMD_CODE 0x0004 #define SCSISCAN_LOCKDEVICE 0x0005 #define SCSISCAN_UNLOCKDEVICE 0x0006 #define SCSISCAN_SET_TIMEOUT 0x0007 #define SCSISCAN_GET_INFO 0x0008 /* SCSI scanner device I/O control codes */ #define IOCTL_SCSISCAN_CMD \ CTL_CODE( FILE_DEVICE_SCANNER, SCSISCAN_CMD_CODE, METHOD_OUT_DIRECT, \ FILE_ANY_ACCESS ) #define IOCTL_SCSISCAN_LOCKDEVICE \ CTL_CODE( FILE_DEVICE_SCANNER, SCSISCAN_LOCKDEVICE, METHOD_OUT_DIRECT, \ FILE_ANY_ACCESS ) #define IOCTL_SCSISCAN_UNLOCKDEVICE \ CTL_CODE( FILE_DEVICE_SCANNER, SCSISCAN_UNLOCKDEVICE, METHOD_OUT_DIRECT, \ FILE_ANY_ACCESS ) #define IOCTL_SCSISCAN_SET_TIMEOUT \ CTL_CODE( FILE_DEVICE_SCANNER, SCSISCAN_SET_TIMEOUT, METHOD_BUFFERED, \ FILE_ANY_ACCESS ) #define IOCTL_SCSISCAN_GET_INFO \ CTL_CODE( FILE_DEVICE_SCANNER, SCSISCAN_GET_INFO, METHOD_OUT_DIRECT, \ FILE_ANY_ACCESS ) /* SCSI scanner command */ typedef struct _SCSISCAN_CMD { ULONG Reserved1; ULONG Size; ULONG SrbFlags; UCHAR CdbLength; UCHAR SenseLength; UCHAR Reserved2; UCHAR Reserved3; ULONG TransferLength; UCHAR Cdb[16]; PUCHAR pSrbStatus; PUCHAR pSenseBuffer; } SCSISCAN_CMD; typedef SCSISCAN_CMD *PSCSISCAN_CMD; /* SCSI scanner information */ typedef struct _SCSISCAN_INFO { ULONG Size; ULONG Flags; UCHAR PortNumber; UCHAR PathId; UCHAR TargetId; UCHAR Lun; UCHAR AdapterName[MAX_STRING]; ULONG Reserved; } SCSISCAN_INFO; typedef SCSISCAN_INFO *PSCSISCAN_INFO; #ifdef __cplusplus } /* extern "C" */ #endif #endif /* _SCSISCAN_H_ */