2008-06-17 14:19:59 +00:00
<chapter xmlns= "http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-stdenv">
2018-05-01 23:54:21 +00:00
<title > The Standard Environment</title>
<para >
The standard build environment in the Nix Packages collection provides an
environment for building Unix packages that does a lot of common build tasks
automatically. In fact, for Unix packages that use the standard
<literal > ./configure; make; make install</literal> build interface, you
don’ t need to write a build script at all; the standard environment does
everything automatically. If <literal > stdenv</literal> doesn’ t do what you
need automatically, you can easily customise or override the various build
phases.
</para>
<section xml:id= "sec-using-stdenv" >
<title > Using <literal > stdenv</literal> </title>
<para >
To build a package with the standard environment, you use the function
<varname > stdenv.mkDerivation</varname> , instead of the primitive built-in
function <varname > derivation</varname> , e.g.
2008-06-19 16:00:37 +00:00
<programlisting >
stdenv.mkDerivation {
name = "libfoo-1.2.3";
src = fetchurl {
url = http://example.org/libfoo-1.2.3.tar.bz2;
2016-10-07 08:08:14 +00:00
sha256 = "0x2g1jqygyr5wiwg4ma1nd7w4ydpy82z9gkcv8vh2v8dn3y58v5m";
2008-06-19 16:00:37 +00:00
};
}</programlisting>
2018-05-01 23:54:21 +00:00
(<varname > stdenv</varname> needs to be in scope, so if you write this in a
separate Nix expression from <filename > pkgs/all-packages.nix</filename> , you
need to pass it as a function argument.) Specifying a
<varname > name</varname> and a <varname > src</varname> is the absolute minimum
you need to do. Many packages have dependencies that are not provided in the
standard environment. It’ s usually sufficient to specify those
dependencies in the <varname > buildInputs</varname> attribute:
2008-06-19 16:00:37 +00:00
<programlisting >
stdenv.mkDerivation {
name = "libfoo-1.2.3";
...
buildInputs = [libbar perl ncurses];
}</programlisting>
2018-05-01 23:54:21 +00:00
This attribute ensures that the <filename > bin</filename> subdirectories of
these packages appear in the <envar > PATH</envar> environment variable during
the build, that their <filename > include</filename> subdirectories are
searched by the C compiler, and so on. (See
<xref linkend= "ssec-setup-hooks" /> for details.)
</para>
<para >
Often it is necessary to override or modify some aspect of the build. To
make this easier, the standard environment breaks the package build into a
number of <emphasis > phases</emphasis> , all of which can be overridden or
modified individually: unpacking the sources, applying patches, configuring,
building, and installing. (There are some others; see
<xref linkend= "sec-stdenv-phases" /> .) For instance, a package that doesn’ t
supply a makefile but instead has to be compiled “manually” could be
handled like this:
2008-06-19 16:00:37 +00:00
<programlisting >
stdenv.mkDerivation {
name = "fnord-4.5";
...
buildPhase = ''
gcc foo.c -o foo
'';
installPhase = ''
2012-01-18 20:16:00 +00:00
mkdir -p $out/bin
2008-06-19 16:00:37 +00:00
cp foo $out/bin
'';
}</programlisting>
2018-05-01 23:54:21 +00:00
(Note the use of <literal > ''</literal> -style string literals, which are very
convenient for large multi-line script fragments because they don’ t need
escaping of <literal > "</literal> and <literal > \</literal> , and because
indentation is intelligently removed.)
</para>
<para >
There are many other attributes to customise the build. These are listed in
<xref linkend= "ssec-stdenv-attributes" /> .
</para>
<para >
While the standard environment provides a generic builder, you can still
supply your own build script:
2008-06-19 16:00:37 +00:00
<programlisting >
stdenv.mkDerivation {
name = "libfoo-1.2.3";
...
builder = ./builder.sh;
}</programlisting>
2018-05-01 23:54:21 +00:00
where the builder can do anything it wants, but typically starts with
2008-06-19 16:00:37 +00:00
<programlisting >
source $stdenv/setup
</programlisting>
2018-05-01 23:54:21 +00:00
to let <literal > stdenv</literal> set up the environment (e.g., process the
<varname > buildInputs</varname> ). If you want, you can still use
<literal > stdenv</literal> ’ s generic builder:
2008-06-19 16:00:37 +00:00
<programlisting >
source $stdenv/setup
buildPhase() {
echo "... this is my custom build phase ..."
gcc foo.c -o foo
}
installPhase() {
2012-01-18 20:16:00 +00:00
mkdir -p $out/bin
2008-06-19 16:00:37 +00:00
cp foo $out/bin
}
genericBuild
</programlisting>
2018-05-01 23:54:21 +00:00
</para>
</section>
<section xml:id= "sec-tools-of-stdenv" >
<title > Tools provided by <literal > stdenv</literal> </title>
<para >
The standard environment provides the following packages:
<itemizedlist >
<listitem >
<para >
The GNU C Compiler, configured with C and C++ support.
</para>
</listitem>
<listitem >
<para >
GNU coreutils (contains a few dozen standard Unix commands).
</para>
</listitem>
<listitem >
<para >
GNU findutils (contains <command > find</command> ).
</para>
</listitem>
<listitem >
<para >
GNU diffutils (contains <command > diff</command> , <command > cmp</command> ).
</para>
</listitem>
<listitem >
<para >
GNU <command > sed</command> .
</para>
</listitem>
<listitem >
<para >
GNU <command > grep</command> .
</para>
</listitem>
<listitem >
<para >
GNU <command > awk</command> .
</para>
</listitem>
<listitem >
<para >
GNU <command > tar</command> .
</para>
</listitem>
<listitem >
<para >
<command > gzip</command> , <command > bzip2</command> and
<command > xz</command> .
</para>
</listitem>
<listitem >
<para >
GNU Make. It has been patched to provide <quote > nested</quote> output
that can be fed into the <command > nix-log2xml</command> command and
<command > log2html</command> stylesheet to create a structured, readable
output of the build steps performed by Make.
</para>
</listitem>
<listitem >
<para >
Bash. This is the shell used for all builders in the Nix Packages
collection. Not using <command > /bin/sh</command> removes a large source
of portability problems.
</para>
</listitem>
<listitem >
<para >
The <command > patch</command> command.
</para>
</listitem>
</itemizedlist>
</para>
<para >
On Linux, <literal > stdenv</literal> also includes the
<command > patchelf</command> utility.
</para>
</section>
<section xml:id= "ssec-stdenv-dependencies" >
<title > Specifying dependencies</title>
<para >
As described in the Nix manual, almost any <filename > *.drv</filename> store
path in a derivation's attribute set will induce a dependency on that
derivation. <varname > mkDerivation</varname> , however, takes a few attributes
intended to, between them, include all the dependencies of a package. This
is done both for structure and consistency, but also so that certain other
setup can take place. For example, certain dependencies need their bin
directories added to the <envar > PATH</envar> . That is built-in, but other
setup is done via a pluggable mechanism that works in conjunction with these
dependency attributes. See <xref linkend= "ssec-setup-hooks" /> for details.
</para>
<para >
Dependencies can be broken down along three axes: their host and target
platforms relative to the new derivation's, and whether they are propagated.
The platform distinctions are motivated by cross compilation; see
<xref linkend= "chap-cross" /> for exactly what each platform means.
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-ignored-build-platform" >
2018-05-01 23:54:21 +00:00
<para >
The build platform is ignored because it is a mere implementation detail
of the package satisfying the dependency: As a general programming
principle, dependencies are always <emphasis > specified</emphasis> as
interfaces, not concrete implementation.
</para>
</footnote>
But even if one is not cross compiling, the platforms imply whether or not
the dependency is needed at run-time or build-time, a concept that makes
perfect sense outside of cross compilation. For now, the run-time/build-time
distinction is just a hint for mental clarity, but in the future it perhaps
could be enforced.
</para>
<para >
2018-11-19 05:20:12 +00:00
The extension of <envar > PATH</envar> with dependencies, alluded to
above, proceeds according to the relative platforms alone. The
process is carried out only for dependencies whose host platform
matches the new derivation's build platform i.e. dependencies which
run on the platform where the new derivation will be built.
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-native-dependencies-in-path" >
2018-05-01 23:54:21 +00:00
<para >
2018-11-19 05:20:12 +00:00
Currently, this means for native builds all dependencies are put
on the <envar > PATH</envar> . But in the future that may not be the
case for sake of matching cross: the platforms would be assumed
to be unique for native and cross builds alike, so only the
<varname > depsBuild*</varname> and
<varname > nativeBuildInputs</varname> would be added to the
2018-05-01 23:54:21 +00:00
<envar > PATH</envar> .
</para>
</footnote>
For each dependency <replaceable > dep</replaceable> of those dependencies,
<filename > <replaceable > dep</replaceable> /bin</filename> , if present, is
added to the <envar > PATH</envar> environment variable.
</para>
<para >
The dependency is propagated when it forces some of its other-transitive
(non-immediate) downstream dependencies to also take it on as an immediate
2018-11-19 05:20:12 +00:00
dependency. Nix itself already takes a package's transitive dependencies into
account, but this propagation ensures nixpkgs-specific infrastructure like
setup hooks (mentioned above) also are run as if the propagated dependency.
2018-05-01 23:54:21 +00:00
</para>
<para >
2018-11-19 05:23:22 +00:00
It is important to note that dependencies are not necessarily propagated as
the same sort of dependency that they were before, but rather as the
2018-05-01 23:54:21 +00:00
corresponding sort so that the platform rules still line up. The exact rules
2018-11-19 05:20:12 +00:00
for dependency propagation can be given by assigning to each dependency two
integers based one how its host and target platforms are offset from the
depending derivation's platforms. Those offsets are given below in the
descriptions of each dependency list attribute. Algorithmically, we traverse
propagated inputs, accumulating every propagated dependency's propagated
2018-11-19 05:23:22 +00:00
dependencies and adjusting them to account for the "shift in perspective"
2018-11-19 05:20:12 +00:00
described by the current dependency's platform offsets. This results in sort
a transitive closure of the dependency relation, with the offsets being
approximately summed when two dependency links are combined. We also prune
transitive dependencies whose combined offsets go out-of-bounds, which can be
viewed as a filter over that transitive closure removing dependencies that
are blatantly absurd.
2018-05-01 23:54:21 +00:00
</para>
<para >
We can define the process precisely with
<link xlink:href= "https://en.wikipedia.org/wiki/Natural_deduction" > Natural
Deduction</link> using the inference rules. This probably seems a bit
obtuse, but so is the bash code that actually implements it!
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-find-inputs-location" >
2018-05-01 23:54:21 +00:00
<para >
The <function > findInputs</function> function, currently residing in
<filename > pkgs/stdenv/generic/setup.sh</filename> , implements the
propagation logic.
</para>
</footnote>
2018-11-19 05:20:12 +00:00
They're confusing in very different ways so... hopefully if something doesn't
make sense in one presentation, it will in the other!
2018-05-01 23:54:21 +00:00
<programlisting >
2017-06-02 16:22:36 +00:00
let mapOffset(h, t, i) = i + (if i < = 0 then h else t - 1)
propagated-dep(h0, t0, A, B)
propagated-dep(h1, t1, B, C)
h0 + h1 in {-1, 0, 1}
h0 + t1 in {-1, 0, 1}
-------------------------------------- Transitive property
propagated-dep(mapOffset(h0, t0, h1),
mapOffset(h0, t0, t1),
A, C)</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2017-06-02 16:22:36 +00:00
let mapOffset(h, t, i) = i + (if i < = 0 then h else t - 1)
dep(h0, _, A, B)
propagated-dep(h1, t1, B, C)
h0 + h1 in {-1, 0, 1}
h0 + t1 in {-1, 0, -1}
2018-11-19 05:20:12 +00:00
----------------------------- Take immediate dependencies' propagated dependencies
2017-06-02 16:22:36 +00:00
propagated-dep(mapOffset(h0, t0, h1),
mapOffset(h0, t0, t1),
A, C)</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2017-06-02 16:22:36 +00:00
propagated-dep(h, t, A, B)
2018-11-19 05:20:12 +00:00
----------------------------- Propagated dependencies count as dependencies
2017-06-02 16:22:36 +00:00
dep(h, t, A, B)</programlisting>
2018-05-01 23:54:21 +00:00
Some explanation of this monstrosity is in order. In the common case, the
target offset of a dependency is the successor to the target offset:
<literal > t = h + 1</literal> . That means that:
<programlisting >
2017-06-02 16:22:36 +00:00
let f(h, t, i) = i + (if i < = 0 then h else t - 1)
let f(h, h + 1, i) = i + (if i < = 0 then h else (h + 1) - 1)
let f(h, h + 1, i) = i + (if i < = 0 then h else h)
let f(h, h + 1, i) = i + h
</programlisting>
2018-11-19 05:20:12 +00:00
This is where "sum-like" comes in from above: We can just sum all of the host
offsets to get the host offset of the transitive dependency. The target
offset is the transitive dependency is simply the host offset + 1, just as it
was with the dependencies composed to make this transitive one; it can be
2018-05-01 23:54:21 +00:00
ignored as it doesn't add any new information.
</para>
<para >
2018-11-19 05:20:12 +00:00
Because of the bounds checks, the uncommon cases are <literal > h = t</literal>
and <literal > h + 2 = t</literal> . In the former case, the motivation for
<function > mapOffset</function> is that since its host and target platforms
are the same, no transitive dependency of it should be able to "discover" an
offset greater than its reduced target offsets.
2018-05-01 23:54:21 +00:00
<function > mapOffset</function> effectively "squashes" all its transitive
dependencies' offsets so that none will ever be greater than the target
offset of the original <literal > h = t</literal> package. In the other case,
2018-11-19 05:20:12 +00:00
<literal > h + 1</literal> is skipped over between the host and target offsets.
Instead of squashing the offsets, we need to "rip" them apart so no
2018-05-01 23:54:21 +00:00
transitive dependencies' offset is that one.
</para>
<para >
2018-11-19 05:20:12 +00:00
Overall, the unifying theme here is that propagation shouldn't be introducing
transitive dependencies involving platforms the depending package is unaware
of. The offset bounds checking and definition of
2018-05-01 23:54:21 +00:00
<function > mapOffset</function> together ensure that this is the case.
Discovering a new offset is discovering a new platform, and since those
platforms weren't in the derivation "spec" of the needing package, they
cannot be relevant. From a capability perspective, we can imagine that the
host and target platforms of a package are the capabilities a package
requires, and the depending package must provide the capability to the
dependency.
</para>
<variablelist >
<title > Variables specifying dependencies</title>
2017-06-02 16:22:36 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsBuildBuild</varname>
2018-05-01 23:54:21 +00:00
</term>
2017-06-02 16:22:36 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host and target platforms are the new
derivation's build platform. This means a <literal > -1</literal> host and
<literal > -1</literal> target offset from the new derivation's platforms.
2018-11-19 05:20:12 +00:00
These are programs and libraries used at build time that produce programs
and libraries also used at build time. If the dependency doesn't care
about the target platform (i.e. isn't a compiler or similar tool), put it
in <varname > nativeBuildInputs</varname> instead. The most common use of
this <literal > buildPackages.stdenv.cc</literal> , the default C compiler
for this role. That example crops up more than one might think in old
commonly used C libraries.
2018-05-01 23:54:21 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
Since these packages are able to be run at build-time, they are always
2018-05-01 23:54:21 +00:00
added to the <envar > PATH</envar> , as described above. But since these
packages are only guaranteed to be able to run then, they shouldn't
2018-11-19 05:20:12 +00:00
persist as run-time dependencies. This isn't currently enforced, but could
be in the future.
2018-05-01 23:54:21 +00:00
</para>
2017-06-02 16:22:36 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > nativeBuildInputs</varname>
2018-05-01 23:54:21 +00:00
</term>
2017-06-02 16:22:36 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host platform is the new derivation's build
platform, and target platform is the new derivation's host platform. This
means a <literal > -1</literal> host offset and <literal > 0</literal> target
2018-11-19 05:20:12 +00:00
offset from the new derivation's platforms. These are programs and
libraries used at build-time that, if they are a compiler or similar tool,
produce code to run at run-time—i.e. tools used to build the new
derivation. If the dependency doesn't care about the target platform (i.e.
isn't a compiler or similar tool), put it here, rather than in
2018-05-01 23:54:21 +00:00
<varname > depsBuildBuild</varname> or <varname > depsBuildTarget</varname> .
2018-11-19 05:20:12 +00:00
This could be called <varname > depsBuildHost</varname> but
<varname > nativeBuildInputs</varname> is used for historical continuity.
2017-06-02 16:22:36 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
Since these packages are able to be run at build-time, they are added to
the <envar > PATH</envar> , as described above. But since these packages are
only guaranteed to be able to run then, they shouldn't persist as run-time
dependencies. This isn't currently enforced, but could be in the future.
2017-06-02 16:22:36 +00:00
</para>
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsBuildTarget</varname>
2018-05-01 23:54:21 +00:00
</term>
2017-06-02 16:22:36 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host platform is the new derivation's build
platform, and target platform is the new derivation's target platform.
This means a <literal > -1</literal> host offset and <literal > 1</literal>
2018-11-19 05:20:12 +00:00
target offset from the new derivation's platforms. These are programs used
at build time that produce code to run with code produced by the depending
package. Most commonly, these are tools used to build the runtime or
2018-11-19 05:23:22 +00:00
standard library that the currently-being-built compiler will inject into
2018-11-19 05:20:12 +00:00
any code it compiles. In many cases, the currently-being-built-compiler is
itself employed for that task, but when that compiler won't run (i.e. its
build and host platform differ) this is not possible. Other times, the
compiler relies on some other tool, like binutils, that is always built
separately so that the dependency is unconditional.
2018-05-01 23:54:21 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
This is a somewhat confusing concept to wrap one’ s head around, and for
good reason. As the only dependency type where the platform offsets are
not adjacent integers, it requires thinking of a bootstrapping stage
<emphasis > two</emphasis> away from the current one. It and its use-case go
hand in hand and are both considered poor form: try to not need this sort
of dependency, and try to avoid building standard libraries and runtimes
2018-05-01 23:54:21 +00:00
in the same derivation as the compiler produces code using them. Instead
strive to build those like a normal library, using the newly-built
compiler just as a normal library would. In short, do not use this
attribute unless you are packaging a compiler and are sure it is needed.
</para>
<para >
2018-11-19 05:20:12 +00:00
Since these packages are able to run at build time, they are added to the
<envar > PATH</envar> , as described above. But since these packages are only
guaranteed to be able to run then, they shouldn't persist as run-time
dependencies. This isn't currently enforced, but could be in the future.
2018-05-01 23:54:21 +00:00
</para>
2017-06-02 16:22:36 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsHostHost</varname>
2018-05-01 23:54:21 +00:00
</term>
2017-12-03 06:42:25 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host and target platforms match the new
2018-11-19 05:20:12 +00:00
derivation's host platform. This means a <literal > 0</literal> host offset
and <literal > 0</literal> target offset from the new derivation's host
platform. These are packages used at run-time to generate code also used
at run-time. In practice, this would usually be tools used by compilers
for macros or a metaprogramming system, or libraries used by the macros or
metaprogramming code itself. It's always preferable to use a
<varname > depsBuildBuild</varname> dependency in the derivation being built
over a <varname > depsHostHost</varname> on the tool doing the building for
this purpose.
2018-05-01 23:54:21 +00:00
</para>
2017-12-03 06:42:25 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > buildInputs</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host platform and target platform match the
2018-11-19 05:20:12 +00:00
new derivation's. This means a <literal > 0</literal> host offset and a
2018-05-01 23:54:21 +00:00
<literal > 1</literal> target offset from the new derivation's host
platform. This would be called <varname > depsHostTarget</varname> but for
historical continuity. If the dependency doesn't care about the target
2018-11-19 05:20:12 +00:00
platform (i.e. isn't a compiler or similar tool), put it here, rather than
in <varname > depsBuildBuild</varname> .
2018-05-01 23:54:21 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
These are often programs and libraries used by the new derivation at
2018-05-01 23:54:21 +00:00
<emphasis > run</emphasis> -time, but that isn't always the case. For
2018-11-19 05:20:12 +00:00
example, the machine code in a statically-linked library is only used at
run-time, but the derivation containing the library is only needed at
build-time. Even in the dynamic case, the library may also be needed at
build-time to appease the linker.
2018-05-01 23:54:21 +00:00
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsTargetTarget</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
A list of dependencies whose host platform matches the new derivation's
target platform. This means a <literal > 1</literal> offset from the new
derivation's platforms. These are packages that run on the target
platform, e.g. the standard library or run-time deps of standard library
that a compiler insists on knowing about. It's poor form in almost all
cases for a package to depend on another from a future stage [future
stage corresponding to positive offset]. Do not use this attribute unless
you are packaging a compiler and are sure it is needed.
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsBuildBuildPropagated</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > depsBuildBuild</varname> . This
perhaps never ought to be used, but it is included for consistency [see
below for the others].
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > propagatedNativeBuildInputs</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > nativeBuildInputs</varname> . This
would be called <varname > depsBuildHostPropagated</varname> but for
historical continuity. For example, if package <varname > Y</varname> has
<literal > propagatedNativeBuildInputs = [X]</literal> , and package
<varname > Z</varname> has <literal > buildInputs = [Y]</literal> , then
package <varname > Z</varname> will be built as if it included package
<varname > X</varname> in its <varname > nativeBuildInputs</varname> . If
instead, package <varname > Z</varname> has <literal > nativeBuildInputs =
[Y]</literal> , then <varname > Z</varname> will be built as if it included
<varname > X</varname> in the <varname > depsBuildBuild</varname> of package
<varname > Z</varname> , because of the sum of the two <literal > -1</literal>
host offsets.
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsBuildTargetPropagated</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > depsBuildTarget</varname> . This is
prefixed for the same reason of alerting potential users.
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > depsHostHostPropagated</varname>
2018-05-01 23:54:21 +00:00
</term>
2014-03-10 19:30:27 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > depsHostHost</varname> .
</para>
2014-03-10 19:30:27 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > propagatedBuildInputs</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > buildInputs</varname> . This would
be called <varname > depsHostTargetPropagated</varname> but for historical
continuity.
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
2018-11-19 05:10:39 +00:00
<varname > depsTargetTargetPropagated</varname>
2018-05-01 23:54:21 +00:00
</term>
2008-08-27 17:34:11 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
The propagated equivalent of <varname > depsTargetTarget</varname> . This is
prefixed for the same reason of alerting potential users.
</para>
2008-08-27 17:34:11 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-stdenv-attributes" >
<title > Attributes</title>
<variablelist >
<title > Variables affecting <literal > stdenv</literal> initialisation</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > NIX_DEBUG</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A natural number indicating how much information to log. If set to 1 or
2018-11-19 05:20:12 +00:00
higher, <literal > stdenv</literal> will print moderate debugging
information during the build. In particular, the <command > gcc</command>
and <command > ld</command> wrapper scripts will print out the complete
command line passed to the wrapped tools. If set to 6 or higher, the
2018-05-01 23:54:21 +00:00
<literal > stdenv</literal> setup script will be run with <literal > set
-x</literal> tracing. If set to 7 or higher, the <command > gcc</command>
and <command > ld</command> wrapper scripts will also be run with
<literal > set -x</literal> tracing.
</para>
</listitem>
</varlistentry>
</variablelist>
2008-09-02 14:54:53 +00:00
2018-05-01 23:54:21 +00:00
<variablelist >
2018-11-07 10:34:01 +00:00
<title > Attributes affecting build properties</title>
2018-05-01 23:54:21 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > enableParallelBuilding</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set to <literal > true</literal> , <literal > stdenv</literal> will pass
specific flags to <literal > make</literal> and other build tools to enable
parallel building with up to <literal > build-cores</literal> workers.
</para>
<para >
Unless set to <literal > false</literal> , some build systems with good
support for parallel building including <literal > cmake</literal> ,
<literal > meson</literal> , and <literal > qmake</literal> will set it to
<literal > true</literal> .
</para>
</listitem>
</varlistentry>
</variablelist>
2015-09-17 13:24:32 +00:00
2018-05-01 23:54:21 +00:00
<variablelist >
<title > Special variables</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > passthru</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
This is an attribute set which can be filled with arbitrary values. For
example:
2015-09-17 13:24:32 +00:00
<programlisting >
2018-05-01 23:54:21 +00:00
passthru = {
foo = "bar";
baz = {
value1 = 4;
value2 = 5;
};
}
2015-09-17 13:24:32 +00:00
</programlisting>
2018-05-01 23:54:21 +00:00
</para>
<para >
Values inside it are not passed to the builder, so you can change them
without triggering a rebuild. However, they can be accessed outside of a
derivation directly, as if they were set inside a derivation itself, e.g.
<literal > hello.baz.value1</literal> . We don't specify any usage or schema
of <literal > passthru</literal> - it is meant for values that would be
useful outside the derivation in other parts of a Nix expression (e.g. in
2018-11-19 05:20:12 +00:00
other derivations). An example would be to convey some specific dependency
of your derivation which contains a program with plugins support. Later,
others who make derivations with plugins can use passed-through dependency
to ensure that their plugin would be binary-compatible with built program.
2018-05-01 23:54:21 +00:00
</para>
2015-09-17 13:24:32 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
2018-11-23 17:03:19 +00:00
<varlistentry >
<term >
<varname > passthru.updateScript</varname>
</term>
<listitem >
<para >
A script to be run by <filename > maintainers/scripts/update.nix</filename> when
the package is matched. It needs to be an executable file, either on the file
system:
<programlisting >
passthru.updateScript = ./update.sh;
</programlisting>
or inside the expression itself:
<programlisting >
passthru.updateScript = writeScript "update-zoom-us" ''
#!/usr/bin/env nix-shell
#!nix-shell -i bash -p curl pcre common-updater-scripts
set -eu -o pipefail
version="$(curl -sI https://zoom.us/client/latest/zoom_x86_64.tar.xz | grep -Fi 'Location:' | pcregrep -o1 '/(([0-9]\.?)+)/')"
update-source-version zoom-us "$version"
'';
</programlisting>
The attribute can also contain a list, a script followed by arguments to be passed to it:
<programlisting >
passthru.updateScript = [ ../../update.sh pname "--requested-release=unstable" ];
</programlisting>
Note that the update scripts will be run in parallel by default; you should avoid running <command > git commit</command> or any other commands that cannot handle that.
</para>
<para >
For information about how to run the updates, execute
<cmdsynopsis > <command > nix-shell</command> <arg > maintainers/scripts/update.nix</arg> </cmdsynopsis> .
</para>
</listitem>
</varlistentry>
2018-05-01 23:54:21 +00:00
</variablelist>
</section>
<section xml:id= "sec-stdenv-phases" >
<title > Phases</title>
<para >
The generic builder has a number of <emphasis > phases</emphasis> . Package
builds are split into phases to make it easier to override specific parts of
the build (e.g., unpacking the sources or installing the binaries).
Furthermore, it allows a nicer presentation of build logs in the Nix build
farm.
</para>
<para >
Each phase can be overridden in its entirety either by setting the
environment variable <varname > <replaceable > name</replaceable> Phase</varname>
to a string containing some shell commands to be executed, or by redefining
the shell function <varname > <replaceable > name</replaceable> Phase</varname> .
The former is convenient to override a phase from the derivation, while the
latter is convenient from a build script. However, typically one only wants
to <emphasis > add</emphasis> some commands to a phase, e.g. by defining
<literal > postInstall</literal> or <literal > preFixup</literal> , as skipping
some of the default actions may have unexpected consequences.
</para>
<section xml:id= "ssec-controlling-phases" >
<title > Controlling phases</title>
<para >
There are a number of variables that control what phases are executed and
in what order:
<variablelist >
<title > Variables affecting phase control</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > phases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Specifies the phases. You can change the order in which phases are
executed, or add new phases, by setting this variable. If it’ s not
set, the default value is used, which is <literal > $prePhases
unpackPhase patchPhase $preConfigurePhases configurePhase
$preBuildPhases buildPhase checkPhase $preInstallPhases installPhase
fixupPhase $preDistPhases distPhase $postPhases</literal> .
</para>
<para >
Usually, if you just want to add a few phases, it’ s more convenient
to set one of the variables below (such as
<varname > preInstallPhases</varname> ), as you then don’ t specify all
the normal phases.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > prePhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed before any of the default phases.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preConfigurePhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed just before the configure phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preBuildPhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed just before the build phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preInstallPhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed just before the install phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preFixupPhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed just before the fixup phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preDistPhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed just before the distribution phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postPhases</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional phases executed after any of the default phases.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</section>
<section xml:id= "ssec-unpack-phase" >
<title > The unpack phase</title>
<para >
The unpack phase is responsible for unpacking the source code of the
package. The default implementation of <function > unpackPhase</function>
unpacks the source files listed in the <envar > src</envar> environment
variable to the current directory. It supports the following files by
default:
<variablelist >
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Tar files
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
These can optionally be compressed using <command > gzip</command>
(<filename > .tar.gz</filename> , <filename > .tgz</filename> or
<filename > .tar.Z</filename> ), <command > bzip2</command>
2018-07-30 14:44:35 +00:00
(<filename > .tar.bz2</filename> , <filename > .tbz2</filename> or
<filename > .tbz</filename> ) or <command > xz</command>
(<filename > .tar.xz</filename> , <filename > .tar.lzma</filename> or
<filename > .txz</filename> ).
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Zip files
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Zip files are unpacked using <command > unzip</command> . However,
<command > unzip</command> is not in the standard environment, so you
2018-11-19 05:10:39 +00:00
should add it to <varname > nativeBuildInputs</varname> yourself.
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Directories in the Nix store
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
These are simply copied to the current directory. The hash part of the
file name is stripped, e.g.
<filename > /nix/store/1wydxgby13cz...-my-sources</filename> would be
copied to <filename > my-sources</filename> .
</para>
</listitem>
</varlistentry>
</variablelist>
Additional file types can be supported by setting the
<varname > unpackCmd</varname> variable (see below).
</para>
<para > </para>
<variablelist >
<title > Variables controlling the unpack phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > srcs</varname> / <varname > src</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The list of source files or directories to be unpacked or copied. One of
these must be set.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > sourceRoot</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
After running <function > unpackPhase</function> , the generic builder
changes the current directory to the directory created by unpacking the
sources. If there are multiple source directories, you should set
<varname > sourceRoot</varname> to the name of the intended directory.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > setSourceRoot</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Alternatively to setting <varname > sourceRoot</varname> , you can set
<varname > setSourceRoot</varname> to a shell command to be evaluated by
the unpack phase after the sources have been unpacked. This command must
set <varname > sourceRoot</varname> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preUnpack</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the unpack phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postUnpack</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the unpack phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontMakeSourcesWritable</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set to <literal > 1</literal> , the unpacked sources are
<emphasis > not</emphasis> made writable. By default, they are made
writable to prevent problems with read-only sources. For example, copied
store directories would be read-only without this.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > unpackCmd</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The unpack phase evaluates the string <literal > $unpackCmd</literal> for
any unrecognised file. The path to the current source file is contained
in the <varname > curSrc</varname> variable.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-patch-phase" >
<title > The patch phase</title>
<para >
The patch phase applies the list of patches defined in the
<varname > patches</varname> variable.
</para>
<variablelist >
<title > Variables controlling the patch phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > patches</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The list of patches. They must be in the format accepted by the
<command > patch</command> command, and may optionally be compressed using
<command > gzip</command> (<filename > .gz</filename> ),
<command > bzip2</command> (<filename > .bz2</filename> ) or
<command > xz</command> (<filename > .xz</filename> ).
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > patchFlags</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Flags to be passed to <command > patch</command> . If not set, the argument
<option > -p1</option> is used, which causes the leading directory
component to be stripped from the file names in each patch.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > prePatch</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the patch phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postPatch</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the patch phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-configure-phase" >
<title > The configure phase</title>
<para >
The configure phase prepares the source tree for building. The default
<function > configurePhase</function> runs <filename > ./configure</filename>
(typically an Autoconf-generated script) if it exists.
</para>
<variablelist >
<title > Variables controlling the configure phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > configureScript</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The name of the configure script. It defaults to
<filename > ./configure</filename> if it exists; otherwise, the configure
phase is skipped. This can actually be a command (like <literal > perl
./Configure.pl</literal> ).
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > configureFlags</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A list of strings passed as additional arguments to the configure
script.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > configureFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A shell array containing additional arguments passed to the configure
script. You must use this instead of <varname > configureFlags</varname>
if the arguments contain spaces.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontAddPrefix</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
By default, the flag <literal > --prefix=$prefix</literal> is added to the
configure flags. If this is undesirable, set this variable to true.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > prefix</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The prefix under which the package must be installed, passed via the
<option > --prefix</option> option to the configure script. It defaults to
<option > $out</option> .
</para>
</listitem>
</varlistentry>
2018-11-19 05:12:06 +00:00
<varlistentry >
<term >
<varname > prefixKey</varname>
</term>
<listitem >
<para >
The key to use when specifying the prefix. By default, this is set to
<option > --prefix=</option> as that is used by the majority of packages.
</para>
</listitem>
</varlistentry>
2018-05-01 23:54:21 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontAddDisableDepTrack</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
By default, the flag <literal > --disable-dependency-tracking</literal> is
added to the configure flags to speed up Automake-based builds. If this
is undesirable, set this variable to true.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontFixLibtool</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
By default, the configure phase applies some special hackery to all
files called <filename > ltmain.sh</filename> before running the configure
script in order to improve the purity of Libtool-based packages
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-sys-lib-search-path" >
2018-05-01 23:54:21 +00:00
<para >
It clears the
<varname > sys_lib_<replaceable > *</replaceable> search_path</varname>
variables in the Libtool script to prevent Libtool from using
libraries in <filename > /usr/lib</filename> and such.
</para>
</footnote>
. If this is undesirable, set this variable to true.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontDisableStatic</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
By default, when the configure script has
<option > --enable-static</option> , the option
<option > --disable-static</option> is added to the configure flags.
</para>
<para >
If this is undesirable, set this variable to true.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > configurePlatforms</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
By default, when cross compiling, the configure script has
<option > --build=...</option> and <option > --host=...</option> passed.
Packages can instead pass <literal > [ "build" "host" "target" ]</literal>
2018-11-19 05:20:12 +00:00
or a subset to control exactly which platform flags are passed. Compilers
and other tools can use this to also pass the target platform.
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-build-time-guessing-impurity" >
2018-05-01 23:54:21 +00:00
<para >
2018-11-19 05:20:12 +00:00
Eventually these will be passed building natively as well, to improve
2018-05-01 23:54:21 +00:00
determinism: build-time guessing, as is done today, is a risk of
impurity.
</para>
</footnote>
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preConfigure</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the configure phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postConfigure</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the configure phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "build-phase" >
<title > The build phase</title>
<para >
The build phase is responsible for actually building the package (e.g.
compiling it). The default <function > buildPhase</function> simply calls
<command > make</command> if a file named <filename > Makefile</filename> ,
<filename > makefile</filename> or <filename > GNUmakefile</filename> exists in
the current directory (or the <varname > makefile</varname> is explicitly
set); otherwise it does nothing.
</para>
<variablelist >
<title > Variables controlling the build phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontBuild</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Set to true to skip the build phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > makefile</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The file name of the Makefile.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > makeFlags</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A list of strings passed as additional flags to <command > make</command> .
These flags are also used by the default install and check phase. For
setting make flags specific to the build phase, use
<varname > buildFlags</varname> (see below).
<programlisting >
makeFlags = [ "PREFIX=$(out)" ];
</programlisting>
<note >
<para >
The flags are quoted in bash, but environment variables can be
specified by using the make syntax.
</para>
</note>
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > makeFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A shell array containing additional arguments passed to
<command > make</command> . You must use this instead of
<varname > makeFlags</varname> if the arguments contain spaces, e.g.
<programlisting >
2019-01-06 14:40:11 +00:00
preBuild = ''
makeFlagsArray+=(CFLAGS="-O0 -g" LDFLAGS="-lfoo -lbar")
'';
2018-05-01 23:54:21 +00:00
</programlisting>
Note that shell arrays cannot be passed through environment variables,
so you cannot set <varname > makeFlagsArray</varname> in a derivation
attribute (because those are passed through environment variables): you
have to define them in shell code.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > buildFlags</varname> / <varname > buildFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A list of strings passed as additional flags to <command > make</command> .
Like <varname > makeFlags</varname> and <varname > makeFlagsArray</varname> ,
but only used by the build phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preBuild</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the build phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postBuild</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the build phase.
</para>
</listitem>
</varlistentry>
</variablelist>
<para >
You can set flags for <command > make</command> through the
<varname > makeFlags</varname> variable.
</para>
<para >
Before and after running <command > make</command> , the hooks
<varname > preBuild</varname> and <varname > postBuild</varname> are called,
respectively.
</para>
</section>
<section xml:id= "ssec-check-phase" >
<title > The check phase</title>
<para >
The check phase checks whether the package was built correctly by running
its test suite. The default <function > checkPhase</function> calls
<command > make check</command> , but only if the <varname > doCheck</varname>
variable is enabled.
</para>
<variablelist >
<title > Variables controlling the check phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > doCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Controls whether the check phase is executed. By default it is skipped,
but if <varname > doCheck</varname> is set to true, the check phase is
usually executed. Thus you should set
<programlisting > doCheck = true;</programlisting>
in the derivation to enable checks. The exception is cross compilation.
Cross compiled builds never run tests, no matter how
<varname > doCheck</varname> is set, as the newly-built program won't run
on the platform used to build it.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > makeFlags</varname> / <varname > makeFlagsArray</varname> / <varname > makefile</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
See the build phase for details.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > checkTarget</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The make target that runs the tests. Defaults to
<literal > check</literal> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > checkFlags</varname> / <varname > checkFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A list of strings passed as additional flags to <command > make</command> .
Like <varname > makeFlags</varname> and <varname > makeFlagsArray</varname> ,
but only used by the check phase.
</para>
</listitem>
</varlistentry>
2018-11-19 05:11:22 +00:00
<varlistentry >
<term >
<varname > checkInputs</varname>
</term>
<listitem >
<para >
A list of dependencies used by the phase. This gets included in
<varname > nativeBuildInputs</varname> when <varname > doCheck</varname> is
set.
</para>
</listitem>
</varlistentry>
2018-05-01 23:54:21 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the check phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the check phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-install-phase" >
<title > The install phase</title>
<para >
The install phase is responsible for installing the package in the Nix
store under <envar > out</envar> . The default
<function > installPhase</function> creates the directory
<literal > $out</literal> and calls <command > make install</command> .
</para>
<variablelist >
<title > Variables controlling the install phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > makeFlags</varname> / <varname > makeFlagsArray</varname> / <varname > makefile</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
See the build phase for details.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > installTargets</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The make targets that perform the installation. Defaults to
<literal > install</literal> . Example:
<programlisting >
installTargets = "install-bin install-doc";</programlisting>
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > installFlags</varname> / <varname > installFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
A list of strings passed as additional flags to <command > make</command> .
Like <varname > makeFlags</varname> and <varname > makeFlagsArray</varname> ,
but only used by the install phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preInstall</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the install phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postInstall</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the install phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-fixup-phase" >
<title > The fixup phase</title>
<para >
The fixup phase performs some (Nix-specific) post-processing actions on the
files installed under <filename > $out</filename> by the install phase. The
default <function > fixupPhase</function> does the following:
<itemizedlist >
<listitem >
<para >
It moves the <filename > man/</filename> , <filename > doc/</filename> and
<filename > info/</filename> subdirectories of <envar > $out</envar> to
<filename > share/</filename> .
</para>
</listitem>
<listitem >
<para >
It strips libraries and executables of debug information.
</para>
</listitem>
<listitem >
<para >
On Linux, it applies the <command > patchelf</command> command to ELF
executables and libraries to remove unused directories from the
<literal > RPATH</literal> in order to prevent unnecessary runtime
dependencies.
</para>
</listitem>
<listitem >
<para >
It rewrites the interpreter paths of shell scripts to paths found in
<envar > PATH</envar> . E.g., <filename > /usr/bin/perl</filename> will be
rewritten to
<filename > /nix/store/<replaceable > some-perl</replaceable> /bin/perl</filename>
found in <envar > PATH</envar> .
</para>
</listitem>
</itemizedlist>
</para>
<variablelist >
<title > Variables controlling the fixup phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontStrip</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set, libraries and executables are not stripped. By default, they
are.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontStripHost</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Like <varname > dontStripHost</varname> , but only affects the
<command > strip</command> command targetting the package's host platform.
Useful when supporting cross compilation, but otherwise feel free to
ignore.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontStripTarget</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Like <varname > dontStripHost</varname> , but only affects the
<command > strip</command> command targetting the packages' target
platform. Useful when supporting cross compilation, but otherwise feel
free to ignore.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontMoveSbin</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set, files in <filename > $out/sbin</filename> are not moved to
<filename > $out/bin</filename> . By default, they are.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > stripAllList</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
List of directories to search for libraries and executables from which
<emphasis > all</emphasis> symbols should be stripped. By default, it’ s
empty. Stripping all symbols is risky, since it may remove not just
debug symbols but also ELF information necessary for normal execution.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > stripAllFlags</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Flags passed to the <command > strip</command> command applied to the
files in the directories listed in <varname > stripAllList</varname> .
Defaults to <option > -s</option> (i.e. <option > --strip-all</option> ).
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > stripDebugList</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
List of directories to search for libraries and executables from which
only debugging-related symbols should be stripped. It defaults to
<literal > lib bin sbin</literal> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > stripDebugFlags</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Flags passed to the <command > strip</command> command applied to the
files in the directories listed in <varname > stripDebugList</varname> .
Defaults to <option > -S</option> (i.e. <option > --strip-debug</option> ).
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontPatchELF</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set, the <command > patchelf</command> command is not used to remove
unnecessary <literal > RPATH</literal> entries. Only applies to Linux.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontPatchShebangs</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set, scripts starting with <literal > #!</literal> do not have their
interpreter paths rewritten to paths in the Nix store.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > forceShare</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The list of directories that must be moved from
<filename > $out</filename> to <filename > $out/share</filename> . Defaults
to <literal > man doc info</literal> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > setupHook</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
2018-11-19 05:20:12 +00:00
A package can export a <link linkend= "ssec-setup-hooks" > setup hook</link>
by setting this variable. The setup hook, if defined, is copied to
<filename > $out/nix-support/setup-hook</filename> . Environment variables
are then substituted in it using <function
linkend="fun-substituteAll">substituteAll</function> .
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preFixup</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the fixup phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postFixup</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the fixup phase.
</para>
</listitem>
</varlistentry>
<varlistentry xml:id= "stdenv-separateDebugInfo" >
2018-06-01 01:03:37 +00:00
<term >
<varname > separateDebugInfo</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set to <literal > true</literal> , the standard environment will enable
debug information in C/C++ builds. After installation, the debug
information will be separated from the executables and stored in the
output named <literal > debug</literal> . (This output is enabled
automatically; you don’ t need to set the <varname > outputs</varname>
attribute explicitly.) To be precise, the debug information is stored in
<filename > <replaceable > debug</replaceable> /lib/debug/.build-id/<replaceable > XX</replaceable> /<replaceable > YYYY…</replaceable> </filename> ,
where <replaceable > XXYYYY…</replaceable> is the <replaceable > build
ID</replaceable> of the binary — a SHA-1 hash of the contents of the
binary. Debuggers like GDB use the build ID to look up the separated
debug information.
</para>
<para >
For example, with GDB, you can add
<programlisting >
set debug-file-directory ~/.nix-profile/lib/debug
</programlisting>
to <filename > ~/.gdbinit</filename> . GDB will then be able to find debug
information installed via <literal > nix-env -i</literal> .
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-installCheck-phase" >
<title > The installCheck phase</title>
<para >
The installCheck phase checks whether the package was installed correctly
by running its test suite against the installed directories. The default
<function > installCheck</function> calls <command > make
installcheck</command> .
</para>
<variablelist >
<title > Variables controlling the installCheck phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > doInstallCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Controls whether the installCheck phase is executed. By default it is
skipped, but if <varname > doInstallCheck</varname> is set to true, the
installCheck phase is usually executed. Thus you should set
2018-09-01 19:20:57 +00:00
<programlisting > doInstallCheck = true;</programlisting>
2018-05-01 23:54:21 +00:00
in the derivation to enable install checks. The exception is cross
compilation. Cross compiled builds never run tests, no matter how
<varname > doInstallCheck</varname> is set, as the newly-built program
won't run on the platform used to build it.
</para>
</listitem>
</varlistentry>
2018-06-23 19:24:04 +00:00
<varlistentry >
<term >
<varname > installCheckTarget</varname>
</term>
<listitem >
<para >
The make target that runs the install tests. Defaults to
<literal > installcheck</literal> .
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
<varname > installCheckFlags</varname> / <varname > installCheckFlagsArray</varname>
</term>
<listitem >
<para >
A list of strings passed as additional flags to <command > make</command> .
Like <varname > makeFlags</varname> and <varname > makeFlagsArray</varname> ,
but only used by the installCheck phase.
</para>
</listitem>
</varlistentry>
2018-05-03 20:24:30 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > installCheckInputs</varname>
</term>
<listitem >
<para >
A list of dependencies used by the phase. This gets included in
<varname > buildInputs</varname> when <varname > doInstallCheck</varname> is
set.
</para>
</listitem>
2018-05-03 20:24:30 +00:00
</varlistentry>
2018-05-01 23:54:21 +00:00
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preInstallCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the installCheck phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postInstallCheck</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the installCheck phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-distribution-phase" >
<title > The distribution phase</title>
<para >
The distribution phase is intended to produce a source distribution of the
package. The default <function > distPhase</function> first calls
<command > make dist</command> , then it copies the resulting source tarballs
to <filename > $out/tarballs/</filename> . This phase is only executed if the
attribute <varname > doDist</varname> is set.
</para>
<variablelist >
<title > Variables controlling the distribution phase</title>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > distTarget</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The make target that produces the distribution. Defaults to
<literal > dist</literal> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > distFlags</varname> / <varname > distFlagsArray</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Additional flags passed to <command > make</command> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > tarballs</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
The names of the source distribution files to be copied to
<filename > $out/tarballs/</filename> . It can contain shell wildcards. The
default is <filename > *.tar.gz</filename> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > dontCopyDist</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
If set, no files are copied to <filename > $out/tarballs/</filename> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > preDist</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the start of the distribution phase.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > postDist</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Hook executed at the end of the distribution phase.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
</section>
<section xml:id= "ssec-stdenv-functions" >
<title > Shell functions</title>
<para >
The standard environment provides a number of useful functions.
</para>
<variablelist >
<varlistentry xml:id= 'fun-makeWrapper' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > makeWrapper</function> <replaceable > executable</replaceable> <replaceable > wrapperfile</replaceable> <replaceable > args</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Constructs a wrapper for a program with various possible arguments. For
example:
2016-10-07 13:55:16 +00:00
<programlisting >
# adds `FOOBAR=baz` to `$out/bin/foo`’ s environment
makeWrapper $out/bin/foo $wrapperfile --set FOOBAR baz
# prefixes the binary paths of `hello` and `git`
# Be advised that paths often should be patched in directly
# (via string replacements or in `configurePhase`).
makeWrapper $out/bin/foo $wrapperfile --prefix PATH : ${lib.makeBinPath [ hello git ]}
</programlisting>
2018-05-01 23:54:21 +00:00
There’ s many more kinds of arguments, they are documented in
<literal > nixpkgs/pkgs/build-support/setup-hooks/make-wrapper.sh</literal> .
</para>
<para >
<literal > wrapProgram</literal> is a convenience function you probably
want to use most of the time.
</para>
2016-10-07 13:55:16 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry xml:id= 'fun-substitute' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > substitute</function> <replaceable > infile</replaceable> <replaceable > outfile</replaceable> <replaceable > subs</replaceable>
2018-05-01 23:54:21 +00:00
</term>
2008-09-05 11:23:49 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Performs string substitution on the contents of
2008-09-05 11:23:49 +00:00
<replaceable > infile</replaceable> , writing the result to
2018-05-01 23:54:21 +00:00
<replaceable > outfile</replaceable> . The substitutions in
2008-09-05 11:23:49 +00:00
<replaceable > subs</replaceable> are of the following form:
2018-05-01 23:54:21 +00:00
<variablelist >
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<option > --replace</option> <replaceable > s1</replaceable> <replaceable > s2</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Replace every occurrence of the string <replaceable > s1</replaceable>
by <replaceable > s2</replaceable> .
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<option > --subst-var</option> <replaceable > varName</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Replace every occurrence of
<literal > @<replaceable > varName</replaceable> @</literal> by the
contents of the environment variable
<replaceable > varName</replaceable> . This is useful for generating
files from templates, using
<literal > @<replaceable > ...</replaceable> @</literal> in the template
as placeholders.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<option > --subst-var-by</option> <replaceable > varName</replaceable> <replaceable > s</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Replace every occurrence of
<literal > @<replaceable > varName</replaceable> @</literal> by the string
<replaceable > s</replaceable> .
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
<para >
Example:
2008-09-05 11:23:49 +00:00
<programlisting >
substitute ./foo.in ./foo.out \
--replace /usr/bin/bar $bar/bin/bar \
--replace "a string containing spaces" "some other text" \
--subst-var someVar
</programlisting>
2018-05-01 23:54:21 +00:00
</para>
<para >
<function > substitute</function> is implemented using the
2008-09-05 11:23:49 +00:00
<command
xlink:href="http://replace.richardlloyd.org.uk/">replace</command>
2018-05-01 23:54:21 +00:00
command. Unlike with the <command > sed</command> command, you don’ t have
to worry about escaping special characters. It supports performing
substitutions on binary files (such as executables), though there
you’ ll probably want to make sure that the replacement string is as
long as the replaced string.
</para>
2008-09-05 11:23:49 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry xml:id= 'fun-substituteInPlace' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > substituteInPlace</function> <replaceable > file</replaceable> <replaceable > subs</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Like <function > substitute</function> , but performs the substitutions in
place on the file <replaceable > file</replaceable> .
</para>
</listitem>
</varlistentry>
<varlistentry xml:id= 'fun-substituteAll' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > substituteAll</function> <replaceable > infile</replaceable> <replaceable > outfile</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Replaces every occurrence of
<literal > @<replaceable > varName</replaceable> @</literal> , where
<replaceable > varName</replaceable> is any environment variable, in
<replaceable > infile</replaceable> , writing the result to
<replaceable > outfile</replaceable> . For instance, if
<replaceable > infile</replaceable> has the contents
2008-09-05 11:23:49 +00:00
<programlisting >
#! @bash@/bin/sh
PATH=@coreutils@/bin
echo @foo@
</programlisting>
2018-05-01 23:54:21 +00:00
and the environment contains
<literal > bash=/nix/store/bmwp0q28cf21...-bash-3.2-p39</literal> and
<literal > coreutils=/nix/store/68afga4khv0w...-coreutils-6.12</literal> ,
but does not contain the variable <varname > foo</varname> , then the output
will be
2008-09-05 11:23:49 +00:00
<programlisting >
#! /nix/store/bmwp0q28cf21...-bash-3.2-p39/bin/sh
PATH=/nix/store/68afga4khv0w...-coreutils-6.12/bin
echo @foo@
</programlisting>
2018-05-01 23:54:21 +00:00
That is, no substitution is performed for undefined variables.
</para>
<para >
Environment variables that start with an uppercase letter or an
underscore are filtered out, to prevent global variables (like
<literal > HOME</literal> ) or private variables (like
<literal > __ETC_PROFILE_DONE</literal> ) from accidentally getting
substituted. The variables also have to be valid bash “names”, as
defined in the bash manpage (alphanumeric or <literal > _</literal> , must
not start with a number).
</para>
</listitem>
</varlistentry>
<varlistentry xml:id= 'fun-substituteAllInPlace' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > substituteAllInPlace</function> <replaceable > file</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Like <function > substituteAll</function> , but performs the substitutions
in place on the file <replaceable > file</replaceable> .
</para>
</listitem>
</varlistentry>
<varlistentry xml:id= 'fun-stripHash' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > stripHash</function> <replaceable > path</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Strips the directory and hash part of a store path, outputting the name
part to <literal > stdout</literal> . For example:
2016-06-21 14:38:11 +00:00
<programlisting >
# prints coreutils-8.24
2016-10-11 16:09:56 +00:00
stripHash "/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24"
2016-06-21 14:38:11 +00:00
</programlisting>
2018-05-01 23:54:21 +00:00
If you wish to store the result in another variable, then the following
idiom may be useful:
2016-06-21 14:38:11 +00:00
<programlisting >
2016-06-25 13:25:58 +00:00
name="/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24"
2016-10-11 16:09:56 +00:00
someVar=$(stripHash $name)
2016-06-21 14:38:11 +00:00
</programlisting>
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry xml:id= 'fun-wrapProgram' >
2018-06-01 01:03:37 +00:00
<term >
2018-06-01 01:09:16 +00:00
<function > wrapProgram</function> <replaceable > executable</replaceable> <replaceable > makeWrapperArgs</replaceable>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Convenience function for <literal > makeWrapper</literal> that
automatically creates a sane wrapper file It takes all the same arguments
as <literal > makeWrapper</literal> , except for <literal > --argv0</literal> .
</para>
<para >
It cannot be applied multiple times, since it will overwrite the wrapper
file.
</para>
2016-10-07 13:55:16 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
</variablelist>
</section>
<section xml:id= "ssec-setup-hooks" >
<title > Package setup hooks</title>
<para >
2018-11-19 05:20:12 +00:00
Nix itself considers a build-time dependency as merely something that should
2018-05-01 23:54:21 +00:00
previously be built and accessible at build time—packages themselves are
on their own to perform any additional setup. In most cases, that is fine,
2018-11-15 02:40:47 +00:00
and the downstream derivation can deal with its own dependencies. But for a
2018-05-01 23:54:21 +00:00
few common tasks, that would result in almost every package doing the same
2018-11-19 05:20:12 +00:00
sort of setup work—depending not on the package itself, but entirely on
2018-05-01 23:54:21 +00:00
which dependencies were used.
</para>
<para >
2018-10-26 10:13:54 +00:00
In order to alleviate this burden, the <firstterm > setup hook</firstterm>
mechanism was written, where any package can include a shell script that [by
convention rather than enforcement by Nix], any downstream
reverse-dependency will source as part of its build process. That allows the
downstream dependency to merely specify its dependencies, and lets those
dependencies effectively initialize themselves. No boilerplate mirroring the
list of dependencies is needed.
2018-05-01 23:54:21 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
The setup hook mechanism is a bit of a sledgehammer though: a powerful
2018-05-01 23:54:21 +00:00
feature with a broad and indiscriminate area of effect. The combination of
its power and implicit use may be expedient, but isn't without costs. Nix
2018-11-19 05:20:12 +00:00
itself is unchanged, but the spirit of added dependencies being effect-free
2018-05-01 23:54:21 +00:00
is violated even if the letter isn't. For example, if a derivation path is
mentioned more than once, Nix itself doesn't care and simply makes sure the
dependency derivation is already built just the same—depending is just
needing something to exist, and needing is idempotent. However, a dependency
specified twice will have its setup hook run twice, and that could easily
2018-11-19 05:20:12 +00:00
change the build environment (though a well-written setup hook will therefore
strive to be idempotent so this is in fact not observable). More broadly,
setup hooks are anti-modular in that multiple dependencies, whether the same
or different, should not interfere and yet their setup hooks may well do so.
2018-05-01 23:54:21 +00:00
</para>
<para >
The most typical use of the setup hook is actually to add other hooks which
are then run (i.e. after all the setup hooks) on each dependency. For
example, the C compiler wrapper's setup hook feeds itself flags for each
2018-09-20 17:45:54 +00:00
dependency that contains relevant libraries and headers. This is done by
2018-05-01 23:54:21 +00:00
defining a bash function, and appending its name to one of
<envar > envBuildBuildHooks</envar> `, <envar > envBuildHostHooks</envar> `,
<envar > envBuildTargetHooks</envar> `, <envar > envHostHostHooks</envar> `,
<envar > envHostTargetHooks</envar> `, or <envar > envTargetTargetHooks</envar> `.
These 6 bash variables correspond to the 6 sorts of dependencies by platform
(there's 12 total but we ignore the propagated/non-propagated axis).
</para>
<para >
Packages adding a hook should not hard code a specific hook, but rather
choose a variable <emphasis > relative</emphasis> to how they are included.
2018-11-19 05:20:12 +00:00
Returning to the C compiler wrapper example, if the wrapper itself is an
2018-05-01 23:54:21 +00:00
<literal > n</literal> dependency, then it only wants to accumulate flags from
<literal > n + 1</literal> dependencies, as only those ones match the
2018-11-19 05:20:12 +00:00
compiler's target platform. The <envar > hostOffset</envar> variable is defined
with the current dependency's host offset <envar > targetOffset</envar> with
its target offset, before its setup hook is sourced. Additionally, since most
environment hooks don't care about the target platform, that means the setup
hook can append to the right bash array by doing something like
2018-05-01 23:54:21 +00:00
<programlisting language= "bash" >
2017-06-02 16:22:36 +00:00
addEnvHooks "$hostOffset" myBashFunction
</programlisting>
2018-05-01 23:54:21 +00:00
</para>
<para >
The <emphasis > existence</emphasis> of setups hooks has long been documented
2018-11-15 02:40:47 +00:00
and packages inside Nixpkgs are free to use this mechanism. Other packages,
2018-05-01 23:54:21 +00:00
however, should not rely on these mechanisms not changing between Nixpkgs
versions. Because of the existing issues with this system, there's little
benefit from mandating it be stable for any period of time.
</para>
<para >
Here are some packages that provide a setup hook. Since the mechanism is
modular, this probably isn't an exhaustive list. Then again, since the
mechanism is only to be used as a last resort, it might be.
<variablelist >
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Bintools Wrapper
</term>
2018-05-01 23:54:21 +00:00
<listitem >
2017-08-18 21:48:30 +00:00
<para >
2018-11-19 05:20:12 +00:00
The Bintools Wrapper wraps the binary utilities for a bunch of
miscellaneous purposes. These are GNU Binutils when targetting Linux, and
a mix of cctools and GNU binutils for Darwin. [The "Bintools" name is
supposed to be a compromise between "Binutils" and "cctools" not denoting
any specific implementation.] Specifically, the underlying bintools
package, and a C standard library (glibc or Darwin's libSystem, just for
the dynamic loader) are all fed in, and dependency finding, hardening
(see below), and purity checks for each are handled by the Bintools
Wrapper. Packages typically depend on CC Wrapper, which in turn (at run
time) depends on the Bintools Wrapper.
2017-08-18 21:48:30 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
The Bintools Wrapper was only just recently split off from CC Wrapper, so
2018-05-01 23:54:21 +00:00
the division of labor is still being worked out. For example, it
shouldn't care about about the C standard library, but just take a
derivation with the dynamic loader (which happens to be the glibc on
linux). Dependency finding however is a task both wrappers will continue
to need to share, and probably the most important to understand. It is
currently accomplished by collecting directories of host-platform
dependencies (i.e. <varname > buildInputs</varname> and
2018-11-19 05:20:12 +00:00
<varname > nativeBuildInputs</varname> ) in environment variables. The
Bintools Wrapper's setup hook causes any <filename > lib</filename> and
2018-05-01 23:54:21 +00:00
<filename > lib64</filename> subdirectories to be added to
2018-11-19 05:20:12 +00:00
<envar > NIX_LDFLAGS</envar> . Since the CC Wrapper and the Bintools Wrapper
use the same strategy, most of the Bintools Wrapper code is sparsely
commented and refers to the CC Wrapper. But the CC Wrapper's code, by
contrast, has quite lengthy comments. The Bintools Wrapper merely cites
those, rather than repeating them, to avoid falling out of sync.
2017-08-18 21:48:30 +00:00
</para>
<para >
2018-05-01 23:54:21 +00:00
A final task of the setup hook is defining a number of standard
2018-11-19 05:20:12 +00:00
environment variables to tell build systems which executables fulfill
2018-05-01 23:54:21 +00:00
which purpose. They are defined to just be the base name of the tools,
2018-11-19 05:20:12 +00:00
under the assumption that the Bintools Wrapper's binaries will be on the
2018-05-01 23:54:21 +00:00
path. Firstly, this helps poorly-written packages, e.g. ones that look
for just <command > gcc</command> when <envar > CC</envar> isn't defined yet
2018-11-19 05:20:12 +00:00
<command > clang</command> is to be used. Secondly, this helps packages not
get confused when cross-compiling, in which case multiple Bintools
2018-05-01 23:54:21 +00:00
Wrappers may simultaneously be in use.
2018-09-01 19:20:57 +00:00
<footnote xml:id= "footnote-stdenv-per-platform-wrapper" >
2018-05-01 23:54:21 +00:00
<para >
Each wrapper targets a single platform, so if binaries for multiple
platforms are needed, the underlying binaries must be wrapped multiple
times. As this is a property of the wrapper itself, the multiple
wrappings are needed whether or not the same underlying binaries can
target multiple platforms.
</para>
</footnote>
<envar > BUILD_</envar> - and <envar > TARGET_</envar> -prefixed versions of
2018-11-19 05:20:12 +00:00
the normal environment variable are defined for additional Bintools
2018-05-01 23:54:21 +00:00
Wrappers, properly disambiguating them.
2017-08-18 21:48:30 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
A problem with this final task is that the Bintools Wrapper is honest and
2018-05-01 23:54:21 +00:00
defines <envar > LD</envar> as <command > ld</command> . Most packages,
however, firstly use the C compiler for linking, secondly use
<envar > LD</envar> anyways, defining it as the C compiler, and thirdly,
2018-11-19 05:20:12 +00:00
only so define <envar > LD</envar> when it is undefined as a fallback. This
triple-threat means Bintools Wrapper will break those packages, as LD is
already defined as the actual linker which the package won't override yet
doesn't want to use. The workaround is to define, just for the
problematic package, <envar > LD</envar> as the C compiler. A good way to
do this would be <command > preConfigure = "LD=$CC"</command> .
2017-08-18 21:48:30 +00:00
</para>
2018-05-01 23:54:21 +00:00
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
CC Wrapper
</term>
2018-05-01 23:54:21 +00:00
<listitem >
2017-09-01 19:33:59 +00:00
<para >
2018-11-19 05:20:12 +00:00
The CC Wrapper wraps a C toolchain for a bunch of miscellaneous purposes.
2018-05-01 23:54:21 +00:00
Specifically, a C compiler (GCC or Clang), wrapped binary tools, and a C
standard library (glibc or Darwin's libSystem, just for the dynamic
loader) are all fed in, and dependency finding, hardening (see below),
2018-11-19 05:20:12 +00:00
and purity checks for each are handled by the CC Wrapper. Packages
typically depend on the CC Wrapper, which in turn (at run-time) depends
on the Bintools Wrapper.
2017-09-01 19:33:59 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
Dependency finding is undoubtedly the main task of the CC Wrapper. This
works just like the Bintools Wrapper, except that any
2018-05-01 23:54:21 +00:00
<filename > include</filename> subdirectory of any relevant dependency is
added to <envar > NIX_CFLAGS_COMPILE</envar> . The setup hook itself
contains some lengthy comments describing the exact convoluted mechanism
by which this is accomplished.
2017-09-01 19:33:59 +00:00
</para>
<para >
2018-11-19 05:20:12 +00:00
Similarly, the CC Wrapper follows the Bintools Wrapper in defining
standard environment variables with the names of the tools it wraps, for
the same reasons described above. Importantly, while it includes a
<command > cc</command> symlink to the c compiler for portability, the
<envar > CC</envar> will be defined using the compiler's "real name" (i.e.
<command > gcc</command> or <command > clang</command> ). This helps lousy
build systems that inspect on the name of the compiler rather than run
it.
2017-09-01 19:33:59 +00:00
</para>
2018-05-01 23:54:21 +00:00
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Perl
</term>
2018-05-01 23:54:21 +00:00
<listitem >
2017-06-02 16:22:36 +00:00
<para >
2018-05-01 23:54:21 +00:00
Adds the <filename > lib/site_perl</filename> subdirectory of each build
input to the <envar > PERL5LIB</envar> environment variable. For instance,
if <varname > buildInputs</varname> contains Perl, then the
<filename > lib/site_perl</filename> subdirectory of each input is added
to the <envar > PERL5LIB</envar> environment variable.
2017-06-02 16:22:36 +00:00
</para>
2018-05-01 23:54:21 +00:00
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Python
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds the <filename > lib/${python.libPrefix}/site-packages</filename>
subdirectory of each build input to the <envar > PYTHONPATH</envar>
environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
pkg-config
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds the <filename > lib/pkgconfig</filename> and
<filename > share/pkgconfig</filename> subdirectories of each build input
to the <envar > PKG_CONFIG_PATH</envar> environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Automake
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds the <filename > share/aclocal</filename> subdirectory of each build
input to the <envar > ACLOCAL_PATH</envar> environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Autoconf
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
The <varname > autoreconfHook</varname> derivation adds
2018-11-19 05:20:12 +00:00
<varname > autoreconfPhase</varname> , which runs autoreconf, libtoolize and
automake, essentially preparing the configure script in autotools-based
builds. Most autotools-based packages come with the configure script
pre-generated, but this hook is necessary for a few packages and when you
need to patch the package’ s configure scripts.
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
libxml2
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds every file named <filename > catalog.xml</filename> found under the
<filename > xml/dtd</filename> and <filename > xml/xsl</filename>
subdirectories of each build input to the
<envar > XML_CATALOG_FILES</envar> environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
teTeX / TeX Live
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds the <filename > share/texmf-nix</filename> subdirectory of each build
input to the <envar > TEXINPUTS</envar> environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
Qt 4
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Sets the <envar > QTDIR</envar> environment variable to Qt’ s path.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
gdk-pixbuf
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
2018-11-19 05:20:12 +00:00
Exports <envar > GDK_PIXBUF_MODULE_FILE</envar> environment variable to the
builder. Add librsvg package to <varname > buildInputs</varname> to get svg
support.
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
GHC
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Creates a temporary package database and registers every Haskell build
input in it (TODO: how?).
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
GStreamer
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
Adds the GStreamer plugins subdirectory of each build input to the
<envar > GST_PLUGIN_SYSTEM_PATH_1_0</envar> or
<envar > GST_PLUGIN_SYSTEM_PATH</envar> environment variable.
</para>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
autoPatchelfHook
</term>
2018-05-01 23:54:21 +00:00
<listitem >
<para >
This is a special setup hook which helps in packaging proprietary
software in that it automatically tries to find missing shared library
2018-11-19 22:33:44 +00:00
dependencies of ELF files based on the given
<varname > buildInputs</varname> and <varname > nativeBuildInputs</varname> .
</para>
<para >
You can also specify a <envar > runtimeDependencies</envar> environment
variable which lists dependencies that are unconditionally added to all
executables.
</para>
<para >
This is useful for programs that use <citerefentry >
<refentrytitle > dlopen</refentrytitle>
<manvolnum > 3</manvolnum>
</citerefentry> to load libraries at runtime.
</para>
<para >
In certain situations you may want to run the main command
(<command > autoPatchelf</command> ) of the setup hook on a file or a set
of directories instead of unconditionally patching all outputs. This
can be done by setting the <envar > dontAutoPatchelf</envar> environment
variable to a non-empty value.
</para>
<para >
The <command > autoPatchelf</command> command also recognizes a
<parameter class= "command" > --no-recurse</parameter> command line flag,
which prevents it from recursing into subdirectories.
2018-05-01 23:54:21 +00:00
</para>
</listitem>
</varlistentry>
2018-10-25 08:52:21 +00:00
<varlistentry >
<term >
breakpointHook
</term>
<listitem >
<para >
2018-10-26 09:53:21 +00:00
This hook will make a build pause instead of stopping when a failure
2018-12-13 17:15:56 +00:00
happens. It prevents nix from cleaning up the build environment immediately and
2018-10-26 09:53:21 +00:00
allows the user to attach to a build environment using the
2018-12-13 17:15:56 +00:00
<command > cntr</command> command. Upon build error it will print
instructions on how to use <command > cntr</command> . Installing
2018-10-26 09:53:21 +00:00
cntr and running the command will provide shell access to the build
sandbox of failed build. At <filename > /var/lib/cntr</filename> the
2018-12-13 17:15:56 +00:00
sandboxed filesystem is mounted. All commands and files of the system are
2018-10-26 09:53:21 +00:00
still accessible within the shell. To execute commands from the sandbox
use the cntr exec subcommand. Note that <command > cntr</command> also
needs to be executed on the machine that is doing the build, which might
2018-12-13 17:15:56 +00:00
not be the case when remote builders are enabled.
2018-11-26 11:54:23 +00:00
<command > cntr</command> is only supported on Linux-based platforms. To
use it first add <literal > cntr</literal> to your
<literal > environment.systemPackages</literal> on NixOS or alternatively to
the root user on non-NixOS systems. Then in the package that is supposed
to be inspected, add <literal > breakpointHook</literal> to
<literal > nativeBuildInputs</literal> .
<programlisting >
nativeBuildInputs = [ breakpointHook ];
</programlisting>
When a build failure happens there will be an instruction printed that
shows how to attach with <literal > cntr</literal> to the build sandbox.
2018-10-25 08:52:21 +00:00
</para>
</listitem>
</varlistentry>
2018-12-02 20:26:53 +00:00
<varlistentry >
<term >
libiconv, libintl
</term>
<listitem >
<para >
A few libraries automatically add to
<literal > NIX_LDFLAGS</literal> their library, making their
symbols automatically available to the linker. This includes
libiconv and libintl (gettext). This is done to provide
compatibility between GNU Linux, where libiconv and libintl
are bundled in, and other systems where that might not be the
case. Sometimes, this behavior is not desired. To disable
this behavior, set <literal > dontAddExtraLibs</literal> .
</para>
</listitem>
</varlistentry>
2018-11-19 05:13:02 +00:00
<varlistentry >
<term >
cmake
</term>
<listitem >
<para >
Overrides the default configure phase to run the CMake command. By
default, we use the Make generator of CMake. In
addition, dependencies are added automatically to CMAKE_PREFIX_PATH so
that packages are correctly detected by CMake. Some additional flags
are passed in to give similar behavior to configure-based packages. You
can disable this hook’ s behavior by setting configurePhase to a custom
value, or by setting dontUseCmakeConfigure. cmakeFlags controls flags
passed only to CMake. By default, parallel building is enabled as CMake
supports parallel building almost everywhere. When Ninja is also in
use, CMake will detect that and use the ninja generator.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
xcbuildHook
</term>
<listitem >
<para >
Overrides the build and install phases to run the “xcbuild” command.
This hook is needed when a project only comes with build files for the
XCode build system. You can disable this behavior by setting buildPhase
and configurePhase to a custom value. xcbuildFlags controls flags
passed only to xcbuild.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
meson
</term>
<listitem >
<para >
Overrides the configure phase to run meson to generate Ninja files. You
can disable this behavior by setting configurePhase to a custom value,
or by setting dontUseMesonConfigure. To run these files, you should
accompany meson with ninja. mesonFlags controls only the flags passed
to meson. By default, parallel building is enabled as Meson supports
parallel building almost everywhere.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
ninja
</term>
<listitem >
<para >
Overrides the build, install, and check phase to run ninja instead of
make. You can disable this behavior with the dontUseNinjaBuild,
dontUseNinjaInstall, and dontUseNinjaCheck, respectively. Parallel
building is enabled by default in Ninja.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
unzip
</term>
<listitem >
<para >
This setup hook will allow you to unzip .zip files specified in $src.
There are many similar packages like unrar, undmg, etc.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
wafHook
</term>
<listitem >
<para >
Overrides the configure, build, and install phases. This will run the
"waf" script used by many projects. If waf doesn’ t exist, it will copy
the version of waf available in Nixpkgs wafFlags can be used to pass
flags to the waf script.
</para>
</listitem>
</varlistentry>
<varlistentry >
<term >
scons
</term>
<listitem >
<para >
Overrides the build, install, and check phases. This uses the scons
build system as a replacement for make. scons does not provide a
configure phase, so everything is managed at build and install time.
</para>
</listitem>
</varlistentry>
</variablelist>
2018-05-01 23:54:21 +00:00
</para>
</section>
<section xml:id= "sec-purity-in-nixpkgs" >
<title > Purity in Nixpkgs</title>
<para >
[measures taken to prevent dependencies on packages outside the store, and
what you can do to prevent them]
</para>
<para >
GCC doesn't search in locations such as <filename > /usr/include</filename> .
In fact, attempts to add such directories through the <option > -I</option>
flag are filtered out. Likewise, the linker (from GNU binutils) doesn't
search in standard locations such as <filename > /usr/lib</filename> . Programs
built on Linux are linked against a GNU C Library that likewise doesn't
search in the default system locations.
</para>
</section>
<section xml:id= "sec-hardening-in-nixpkgs" >
<title > Hardening in Nixpkgs</title>
<para >
There are flags available to harden packages at compile or link-time. These
can be toggled using the <varname > stdenv.mkDerivation</varname> parameters
<varname > hardeningDisable</varname> and <varname > hardeningEnable</varname> .
</para>
<para >
Both parameters take a list of flags as strings. The special
<varname > "all"</varname> flag can be passed to
<varname > hardeningDisable</varname> to turn off all hardening. These flags
can also be used as environment variables for testing or development
purposes.
</para>
<para >
The following flags are enabled by default and might require disabling with
<varname > hardeningDisable</varname> if the program to package is
incompatible.
</para>
<variablelist >
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > format</varname>
2018-05-01 23:54:21 +00:00
</term>
<listitem >
<para >
Adds the <option > -Wformat -Wformat-security
-Werror=format-security</option> compiler options. At present, this warns
about calls to <varname > printf</varname> and <varname > scanf</varname>
functions where the format string is not a string literal and there are
no format arguments, as in <literal > printf(foo);</literal> . This may be a
security hole if the format string came from untrusted input and contains
<literal > %n</literal> .
</para>
<para >
This needs to be turned off or fixed for errors similar to:
</para>
<programlisting >
2016-02-22 00:23:15 +00:00
/tmp/nix-build-zynaddsubfx-2.5.2.drv-0/zynaddsubfx-2.5.2/src/UI/guimain.cpp:571:28: error: format not a string literal and no format arguments [-Werror=format-security]
printf(help_message);
^
cc1plus: some warnings being treated as errors
2018-05-01 23:54:21 +00:00
</programlisting>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > stackprotector</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -fstack-protector-strong --param
ssp-buffer-size=4</option> compiler options. This adds safety checks
against stack overwrites rendering many potential code injection attacks
into aborting situations. In the best case this turns code injection
vulnerabilities into denial of service or into non-issues (depending on
the application).
</para>
<para >
This needs to be turned off or fixed for errors similar to:
</para>
<programlisting >
2016-02-22 00:33:01 +00:00
bin/blib.a(bios_console.o): In function `bios_handle_cup':
/tmp/nix-build-ipxe-20141124-5cbdc41.drv-0/ipxe-5cbdc41/src/arch/i386/firmware/pcbios/bios_console.c:86: undefined reference to `__stack_chk_fail'
2018-05-01 23:54:21 +00:00
</programlisting>
</listitem>
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > fortify</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -O2 -D_FORTIFY_SOURCE=2</option> compiler options.
During code generation the compiler knows a great deal of information
about buffer sizes (where possible), and attempts to replace insecure
unlimited length buffer function calls with length-limited ones. This is
especially useful for old, crufty code. Additionally, format strings in
writable memory that contain '%n' are blocked. If an application depends
on such a format string, it will need to be worked around.
</para>
<para >
Additionally, some warnings are enabled which might trigger build
failures if compiler warnings are treated as errors in the package build.
In this case, set <option > NIX_CFLAGS_COMPILE</option> to
<option > -Wno-error=warning-type</option> .
</para>
<para >
This needs to be turned off or fixed for errors similar to:
</para>
<programlisting >
2016-08-12 16:11:21 +00:00
malloc.c:404:15: error: return type is an incomplete type
malloc.c:410:19: error: storage size of 'ms' isn't known
</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2016-08-12 16:11:21 +00:00
strdup.h:22:1: error: expected identifier or '(' before '__extension__'
</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2016-08-12 16:11:21 +00:00
strsep.c:65:23: error: register name not specified for 'delim'
</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2016-08-12 16:11:21 +00:00
installwatch.c:3751:5: error: conflicting types for '__open_2'
</programlisting>
2018-05-01 23:54:21 +00:00
<programlisting >
2016-08-12 16:11:21 +00:00
fcntl2.h:50:4: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
</programlisting>
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > pic</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -fPIC</option> compiler options. This options adds
support for position independent code in shared libraries and thus making
ASLR possible.
</para>
<para >
Most notably, the Linux kernel, kernel modules and other code not running
in an operating system environment like boot loaders won't build with PIC
enabled. The compiler will is most cases complain that PIC is not
supported for a specific build.
</para>
<para >
This needs to be turned off or fixed for assembler errors similar to:
</para>
<programlisting >
2016-08-12 16:11:21 +00:00
ccbLfRgg.s: Assembler messages:
ccbLfRgg.s:33: Error: missing or invalid displacement expression `private_key_len@GOTOFF'
</programlisting>
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > strictoverflow</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Signed integer overflow is undefined behaviour according to the C
standard. If it happens, it is an error in the program as it should check
for overflow before it can happen, not afterwards. GCC provides built-in
functions to perform arithmetic with overflow checking, which are correct
and faster than any custom implementation. As a workaround, the option
<option > -fno-strict-overflow</option> makes gcc behave as if signed
integer overflows were defined.
</para>
<para >
This flag should not trigger any build or runtime errors.
</para>
2016-08-12 16:11:21 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > relro</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -z relro</option> linker option. During program load,
several ELF memory sections need to be written to by the linker, but can
be turned read-only before turning over control to the program. This
prevents some GOT (and .dtors) overwrite attacks, but at least the part
of the GOT used by the dynamic linker (.got.plt) is still vulnerable.
</para>
<para >
This flag can break dynamic shared object loading. For instance, the
module systems of Xorg and OpenCV are incompatible with this flag. In
almost all cases the <varname > bindnow</varname> flag must also be
disabled and incompatible programs typically fail with similar errors at
runtime.
</para>
2016-08-12 16:11:21 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > bindnow</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -z bindnow</option> linker option. During program load,
all dynamic symbols are resolved, allowing for the complete GOT to be
marked read-only (due to <varname > relro</varname> ). This prevents GOT
overwrite attacks. For very large applications, this can incur some
performance loss during initial load while symbols are resolved, but this
shouldn't be an issue for daemons.
</para>
<para >
This flag can break dynamic shared object loading. For instance, the
module systems of Xorg and PHP are incompatible with this flag. Programs
incompatible with this flag often fail at runtime due to missing symbols,
like:
</para>
<programlisting >
2016-08-12 16:11:21 +00:00
intel_drv.so: undefined symbol: vgaHWFreeHWRec
</programlisting>
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
</variablelist>
2016-08-12 16:11:21 +00:00
2018-05-01 23:54:21 +00:00
<para >
The following flags are disabled by default and should be enabled with
<varname > hardeningEnable</varname> for packages that take untrusted input
like network services.
</para>
2016-08-12 16:11:21 +00:00
2018-05-01 23:54:21 +00:00
<variablelist >
<varlistentry >
2018-06-01 01:03:37 +00:00
<term >
<varname > pie</varname>
2018-05-01 23:54:21 +00:00
</term>
2016-08-12 16:11:21 +00:00
<listitem >
2018-05-01 23:54:21 +00:00
<para >
Adds the <option > -fPIE</option> compiler and <option > -pie</option> linker
options. Position Independent Executables are needed to take advantage of
Address Space Layout Randomization, supported by modern kernel versions.
While ASLR can already be enforced for data areas in the stack and heap
(brk and mmap), the code areas must be compiled as position-independent.
Shared libraries already do this with the <varname > pic</varname> flag, so
they gain ASLR automatically, but binary .text regions need to be build
with <varname > pie</varname> to gain ASLR. When this happens, ROP attacks
are much harder since there are no static locations to bounce off of
during a memory corruption attack.
</para>
2016-08-12 16:11:21 +00:00
</listitem>
2018-05-01 23:54:21 +00:00
</varlistentry>
</variablelist>
<para >
For more in-depth information on these hardening flags and hardening in
general, refer to the
<link xlink:href= "https://wiki.debian.org/Hardening" > Debian Wiki</link> ,
<link xlink:href= "https://wiki.ubuntu.com/Security/Features" > Ubuntu
Wiki</link> ,
<link xlink:href= "https://wiki.gentoo.org/wiki/Project:Hardened" > Gentoo
Wiki</link> , and the
<link xlink:href= "https://wiki.archlinux.org/index.php/DeveloperWiki:Security" >
Arch Wiki</link> .
</para>
</section>
2008-06-17 14:19:59 +00:00
</chapter>