2021-01-01 17:45:43 +00:00
# Python {#python}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
## User Guide {#user-guide}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Using Python {#using-python}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
#### Overview {#overview}
2017-08-26 09:21:30 +00:00
Several versions of the Python interpreter are available on Nix, as well as a
2021-03-13 13:11:31 +00:00
high amount of packages. The attribute `python3` refers to the default
2022-05-25 23:03:43 +00:00
interpreter, which is currently CPython 3.10. The attribute `python` refers to
2021-03-13 13:11:31 +00:00
CPython 2.7 for backwards-compatibility. It is also possible to refer to
2022-05-25 23:03:43 +00:00
specific versions, e.g. `python39` refers to CPython 3.9, and `pypy` refers to
2017-08-26 09:21:30 +00:00
the default PyPy interpreter.
Python is used a lot, and in different ways. This affects also how it is
packaged. In the case of Python on Nix, an important distinction is made between
whether the package is considered primarily an application, or whether it should
be used as a library, i.e., of primary interest are the modules in
`site-packages` that should be importable.
In the Nixpkgs tree Python applications can be found throughout, depending on
what they do, and are called from the main package set. Python libraries,
however, are in separate sets, with one set per interpreter version.
The interpreters have several common attributes. One of these attributes is
`pkgs` , which is a package set of Python libraries for this specific
interpreter. E.g., the `toolz` package corresponding to the default interpreter
2022-05-25 23:03:43 +00:00
is `python.pkgs.toolz` , and the CPython 3.9 version is `python39.pkgs.toolz` .
2017-08-26 09:21:30 +00:00
The main package set contains aliases to these package sets, e.g.
2022-05-25 23:03:43 +00:00
`pythonPackages` refers to `python.pkgs` and `python39Packages` to
`python39.pkgs` .
2017-08-26 09:21:30 +00:00
2021-06-05 19:22:45 +00:00
#### Installing Python and packages {#installing-python-and-packages}
2016-02-21 19:13:44 +00:00
2017-08-26 09:21:30 +00:00
The Nix and NixOS manuals explain how packages are generally installed. In the
case of Python and Nix, it is important to make a distinction between whether the
package is considered an application or a library.
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Applications on Nix are typically installed into your user profile imperatively
using `nix-env -i` , and on NixOS declaratively by adding the package name to
`environment.systemPackages` in `/etc/nixos/configuration.nix` . Dependencies
such as libraries are automatically installed and should not be installed
explicitly.
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
The same goes for Python applications. Python applications can be installed in
your profile, and will be wrapped to find their exact library dependencies,
without impacting other applications or polluting your user environment.
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
But Python libraries you would like to use for development cannot be installed,
at least not individually, because they won't be able to find each other
resulting in import errors. Instead, it is possible to create an environment
with `python.buildEnv` or `python.withPackages` where the interpreter and other
executables are wrapped to be able to find each other and all of the modules.
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
In the following examples we will start by creating a simple, ad-hoc environment
2022-05-25 23:03:43 +00:00
with a nix-shell that has `numpy` and `toolz` in Python 3.9; then we will create
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
a re-usable environment in a single-file Python script; then we will create a
full Python environment for development with this same environment.
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Philosphically, this should be familiar to users who are used to a `venv` style
of development: individual projects create their own Python environments without
impacting the global environment or each other.
2017-08-26 09:21:30 +00:00
2021-06-05 19:22:45 +00:00
#### Ad-hoc temporary Python environment with `nix-shell` {#ad-hoc-temporary-python-environment-with-nix-shell}
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
The simplest way to start playing with the way nix wraps and sets up Python
environments is with `nix-shell` at the cmdline. These environments create a
temporary shell session with a Python and a *precise* list of packages (plus
their runtime dependencies), with no other Python packages in the Python
interpreter's scope.
2017-08-26 09:21:30 +00:00
2022-05-25 23:03:43 +00:00
To create a Python 3.9 session with `numpy` and `toolz` available, run:
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
```sh
2022-05-25 23:03:43 +00:00
$ nix-shell -p 'python39.withPackages(ps: with ps; [ numpy toolz ])'
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
```
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
By default `nix-shell` will start a `bash` session with this interpreter in our
`PATH` , so if we then run:
2017-08-26 09:21:30 +00:00
2021-03-13 23:30:36 +00:00
```Python console
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
[nix-shell:~/src/nixpkgs]$ python3
2022-05-25 23:03:43 +00:00
Python 3.9.12 (main, Mar 23 2022, 21:36:19)
[GCC 11.3.0] on linux
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Type "help", "copyright", "credits" or "license" for more information.
>>> import numpy; import toolz
2016-02-21 19:13:44 +00:00
```
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Note that no other modules are in scope, even if they were imperatively
installed into our user environment as a dependency of a Python application:
2016-02-21 19:13:44 +00:00
2021-03-13 23:30:36 +00:00
```Python console
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
>>> import requests
Traceback (most recent call last):
File "< stdin > ", line 1, in < module >
ModuleNotFoundError: No module named 'requests'
```
2017-08-26 09:21:30 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
We can add as many additional modules onto the `nix-shell` as we need, and we
will still get 1 wrapped Python interpreter. We can start the interpreter
directly like so:
2020-02-09 16:23:11 +00:00
2017-08-26 09:21:30 +00:00
```sh
2022-05-25 23:03:43 +00:00
$ nix-shell -p "python39.withPackages (ps: with ps; [ numpy toolz requests ])" --run python3
this derivation will be built:
/nix/store/mpn7k6bkjl41fm51342rafaqfsl10qs4-python3-3.9.12-env.drv
this path will be fetched (0.09 MiB download, 0.41 MiB unpacked):
/nix/store/5gaiacnzi096b6prc6aa1pwrhncmhc8b-python3.9-toolz-0.11.2
copying path '/nix/store/5gaiacnzi096b6prc6aa1pwrhncmhc8b-python3.9-toolz-0.11.2' from 'https://cache.nixos.org'...
building '/nix/store/mpn7k6bkjl41fm51342rafaqfsl10qs4-python3-3.9.12-env.drv'...
created 279 symlinks in user environment
Python 3.9.12 (main, Mar 23 2022, 21:36:19)
[GCC 11.3.0] on linux
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Type "help", "copyright", "credits" or "license" for more information.
>>> import requests
>>>
```
Notice that this time it built a new Python environment, which now includes
`requests` . Building an environment just creates wrapper scripts that expose the
selected dependencies to the interpreter while re-using the actual modules. This
means if any other env has installed `requests` or `numpy` in a different
context, we don't need to recompile them -- we just recompile the wrapper script
that sets up an interpreter pointing to them. This matters much more for "big"
modules like `pytorch` or `tensorflow` .
Module names usually match their names on [pypi.org ](https://pypi.org/ ), but
you can use the [Nixpkgs search website ](https://nixos.org/nixos/packages.html )
to find them as well (along with non-python packages).
At this point we can create throwaway experimental Python environments with
arbitrary dependencies. This is a good way to get a feel for how the Python
interpreter and dependencies work in Nix and NixOS, but to do some actual
development, we'll want to make it a bit more persistent.
2021-06-05 19:22:45 +00:00
##### Running Python scripts and using `nix-shell` as shebang {#running-python-scripts-and-using-nix-shell-as-shebang}
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Sometimes, we have a script whose header looks like this:
```python
#!/usr/bin/env python3
import numpy as np
a = np.array([1,2])
b = np.array([3,4])
print(f"The dot product of {a} and {b} is: {np.dot(a, b)}")
2017-08-26 09:21:30 +00:00
```
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Executing this script requires a `python3` that has `numpy` . Using what we learned
in the previous section, we could startup a shell and just run it like so:
2020-02-09 16:23:11 +00:00
2021-06-05 19:22:45 +00:00
```ShellSession
2022-05-25 23:03:43 +00:00
$ nix-shell -p 'python39.withPackages(ps: with ps; [ numpy ])' --run 'python3 foo.py'
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
The dot product of [1 2] and [3 4] is: 11
```
But if we maintain the script ourselves, and if there are more dependencies, it
may be nice to encode those dependencies in source to make the script re-usable
without that bit of knowledge. That can be done by using `nix-shell` as a
2020-11-28 03:06:50 +00:00
[shebang ](https://en.wikipedia.org/wiki/Shebang_(Unix )), like so:
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
```python
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p "python3.withPackages(ps: [ ps.numpy ])"
import numpy as np
a = np.array([1,2])
b = np.array([3,4])
print(f"The dot product of {a} and {b} is: {np.dot(a, b)}")
2016-02-21 19:13:44 +00:00
```
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Then we simply execute it, without requiring any environment setup at all!
2016-02-21 19:13:44 +00:00
```sh
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
$ ./foo.py
The dot product of [1 2] and [3 4] is: 11
2017-08-26 09:21:30 +00:00
```
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
If the dependencies are not available on the host where `foo.py` is executed, it
will build or download them from a Nix binary cache prior to starting up, prior
that it is executed on a machine with a multi-user nix installation.
This provides a way to ship a self bootstrapping Python script, akin to a
statically linked binary, where it can be run on any machine (provided nix is
installed) without having to assume that `numpy` is installed globally on the
system.
By default it is pulling the import checkout of Nixpkgs itself from our nix
channel, which is nice as it cache aligns with our other package builds, but we
can make it fully reproducible by pinning the `nixpkgs` import:
```python
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p "python3.withPackages(ps: [ ps.numpy ])"
#!nix-shell -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/d373d80b1207d52621961b16aa4a3438e4f98167.tar.gz
import numpy as np
a = np.array([1,2])
b = np.array([3,4])
print(f"The dot product of {a} and {b} is: {np.dot(a, b)}")
```
This will execute with the exact same versions of Python 3.8, numpy, and system
dependencies a year from now as it does today, because it will always use
exactly git commit `d373d80b1207d52621961b16aa4a3438e4f98167` of Nixpkgs for all
of the package versions.
This is also a great way to ensure the script executes identically on different
servers.
2017-08-26 09:21:30 +00:00
2021-06-05 19:22:45 +00:00
##### Load environment from `.nix` expression {#load-environment-from-.nix-expression}
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
We've now seen how to create an ad-hoc temporary shell session, and how to
create a single script with Python dependencies, but in the course of normal
development we're usually working in an entire package repository.
As explained in the Nix manual, `nix-shell` can also load an expression from a
2022-05-25 23:03:43 +00:00
`.nix` file. Say we want to have Python 3.9, `numpy` and `toolz` , like before,
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
in an environment. We can add a `shell.nix` file describing our dependencies:
2020-02-09 16:23:11 +00:00
2017-08-26 09:21:30 +00:00
```nix
with import < nixpkgs > {};
2022-05-25 23:03:43 +00:00
(python39.withPackages (ps: [ps.numpy ps.toolz])).env
2016-02-21 19:13:44 +00:00
```
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
And then at the command line, just typing `nix-shell` produces the same
environment as before. In a normal project, we'll likely have many more
dependencies; this can provide a way for developers to share the environments
with each other and with CI builders.
2017-08-26 09:21:30 +00:00
What's happening here?
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
1. We begin with importing the Nix Packages collections. `import <nixpkgs>`
imports the `<nixpkgs>` function, `{}` calls it and the `with` statement
brings all attributes of `nixpkgs` in the local scope. These attributes form
the main package set.
2022-05-25 23:03:43 +00:00
2. Then we create a Python 3.9 environment with the `withPackages` function, as before.
2020-02-09 16:23:11 +00:00
3. The `withPackages` function expects us to provide a function as an argument
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
that takes the set of all Python packages and returns a list of packages to
2020-02-09 16:23:11 +00:00
include in the environment. Here, we select the packages `numpy` and `toolz`
from the package set.
2016-02-21 19:13:44 +00:00
2019-11-09 09:25:57 +00:00
To combine this with `mkShell` you can:
```nix
with import < nixpkgs > {};
let
2022-05-25 23:03:43 +00:00
pythonEnv = python39.withPackages (ps: [
2019-11-09 09:25:57 +00:00
ps.numpy
ps.toolz
]);
in mkShell {
2021-05-13 17:17:29 +00:00
packages = [
2019-11-09 09:25:57 +00:00
pythonEnv
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
black
mypy
libffi
openssl
2019-11-09 09:25:57 +00:00
];
}
```
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
This will create a unified environment that has not just our Python interpreter
and its Python dependencies, but also tools like `black` or `mypy` and libraries
like `libffi` the `openssl` in scope. This is generic and can span any number of
tools or languages across the Nixpkgs ecosystem.
2020-02-09 16:23:11 +00:00
2021-06-05 19:22:45 +00:00
##### Installing environments globally on the system {#installing-environments-globally-on-the-system}
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Up to now, we've been creating environments scoped to an ad-hoc shell session,
or a single script, or a single project. This is generally advisable, as it
avoids pollution across contexts.
However, sometimes we know we will often want a Python with some basic packages,
and want this available without having to enter into a shell or build context.
This can be useful to have things like vim/emacs editors and plugins or shell
tools "just work" without having to set them up, or when running other software
that expects packages to be installed globally.
To create your own custom environment, create a file in `~/.config/nixpkgs/overlays/`
that looks like this:
```nix
# ~/.config/nixpkgs/overlays/myEnv.nix
self: super: {
myEnv = super.buildEnv {
name = "myEnv";
paths = [
# A Python 3 interpreter with some packages
(self.python3.withPackages (
ps: with ps; [
pyflakes
pytest
2022-05-05 19:36:08 +00:00
black
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
]
))
# Some other packages we'd like as part of this env
self.mypy
self.black
self.ripgrep
self.tmux
];
};
}
2017-08-26 09:21:30 +00:00
```
2020-02-09 16:23:11 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
You can then build and install this to your profile with:
2020-02-09 16:23:11 +00:00
2016-02-21 19:13:44 +00:00
```sh
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
nix-env -iA myEnv
2016-02-21 19:13:44 +00:00
```
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
One limitation of this is that you can only have 1 Python env installed
globally, since they conflict on the `python` to load out of your `PATH` .
If you get a conflict or prefer to keep the setup clean, you can have `nix-env`
atomically *uninstall* all other imperatively installed packages and replace
your profile with just `myEnv` by using the `--replace` flag.
2021-06-05 19:22:45 +00:00
##### Environment defined in `/etc/nixos/configuration.nix` {#environment-defined-in-etcnixosconfiguration.nix}
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
For the sake of completeness, here's how to install the environment system-wide
on NixOS.
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
```nix
{ # ...
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
environment.systemPackages = with pkgs; [
(python38.withPackages(ps: with ps; [ numpy toolz ]))
];
}
2016-02-21 19:13:44 +00:00
```
2021-06-05 19:22:45 +00:00
### Developing with Python {#developing-with-python}
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Above, we were mostly just focused on use cases and what to do to get started
creating working Python environments in nix.
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Now that you know the basics to be up and running, it is time to take a step
2021-03-14 10:49:35 +00:00
back and take a deeper look at how Python packages are packaged on Nix. Then,
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
we will look at how you can use development mode with your code.
2021-06-05 19:22:45 +00:00
#### Python library packages in Nixpkgs {#python-library-packages-in-nixpkgs}
2016-02-21 19:13:44 +00:00
2017-08-26 09:21:30 +00:00
With Nix all packages are built by functions. The main function in Nix for
building Python libraries is `buildPythonPackage` . Let's see how we can build the
`toolz` package.
2016-02-21 19:13:44 +00:00
```nix
2018-10-10 00:42:29 +00:00
{ lib, buildPythonPackage, fetchPypi }:
2016-02-21 19:13:44 +00:00
2019-03-19 00:01:54 +00:00
buildPythonPackage rec {
pname = "toolz";
2020-05-09 16:58:00 +00:00
version = "0.10.0";
2019-03-19 00:01:54 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-CP3V73yWSArRHBLUct4hrNMjWZlvaaUlkpm1QP66RWA=";
2016-02-21 19:13:44 +00:00
};
2019-03-19 00:01:54 +00:00
doCheck = false;
meta = with lib; {
2020-02-16 16:31:03 +00:00
homepage = "https://github.com/pytoolz/toolz";
2019-03-19 00:01:54 +00:00
description = "List processing tools and functional utilities";
license = licenses.bsd3;
maintainers = with maintainers; [ fridh ];
};
2019-04-25 20:37:53 +00:00
}
2016-02-21 19:13:44 +00:00
```
What happens here? The function `buildPythonPackage` is called and as argument
2017-08-26 09:21:30 +00:00
it accepts a set. In this case the set is a recursive set, `rec` . One of the
arguments is the name of the package, which consists of a basename (generally
following the name on PyPi) and a version. Another argument, `src` specifies the
source, which in this case is fetched from PyPI using the helper function
`fetchPypi` . The argument `doCheck` is used to set whether tests should be run
when building the package. Furthermore, we specify some (optional) meta
information. The output of the function is a derivation.
An expression for `toolz` can be found in the Nixpkgs repository. As explained
in the introduction of this Python section, a derivation of `toolz` is available
2022-05-25 23:03:43 +00:00
for each interpreter version, e.g. `python39.pkgs.toolz` refers to the `toolz`
derivation corresponding to the CPython 3.9 interpreter.
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
2016-02-21 19:13:44 +00:00
The above example works when you're directly working on
`pkgs/top-level/python-packages.nix` in the Nixpkgs repository. Often though,
2017-08-26 09:21:30 +00:00
you will want to test a Nix expression outside of the Nixpkgs tree.
2016-02-21 19:13:44 +00:00
2017-08-26 09:21:30 +00:00
The following expression creates a derivation for the `toolz` package,
and adds it along with a `numpy` package to a Python environment.
2016-02-21 19:13:44 +00:00
```nix
with import < nixpkgs > {};
( let
2022-05-25 23:03:43 +00:00
my_toolz = python39.pkgs.buildPythonPackage rec {
2017-08-26 09:21:30 +00:00
pname = "toolz";
2020-05-09 16:58:00 +00:00
version = "0.10.0";
2017-08-26 09:21:30 +00:00
2022-05-25 23:03:43 +00:00
src = python39.pkgs.fetchPypi {
2017-08-26 09:21:30 +00:00
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-CP3V73yWSArRHBLUct4hrNMjWZlvaaUlkpm1QP66RWA=";
2016-02-21 19:13:44 +00:00
};
2016-12-21 14:44:50 +00:00
doCheck = false;
2016-02-21 19:13:44 +00:00
meta = {
2018-06-27 20:12:57 +00:00
homepage = "https://github.com/pytoolz/toolz/";
2016-02-21 19:13:44 +00:00
description = "List processing tools and functional utilities";
};
};
2020-05-09 16:58:00 +00:00
in python38.withPackages (ps: [ps.numpy my_toolz])
2016-02-21 19:13:44 +00:00
).env
```
2020-02-09 16:23:11 +00:00
2017-08-26 09:21:30 +00:00
Executing `nix-shell` will result in an environment in which you can use
2022-05-25 23:03:43 +00:00
Python 3.9 and the `toolz` package. As you can see we had to explicitly mention
2017-08-26 09:21:30 +00:00
for which Python version we want to build a package.
2016-02-21 19:13:44 +00:00
2017-08-26 09:21:30 +00:00
So, what did we do here? Well, we took the Nix expression that we used earlier
to build a Python environment, and said that we wanted to include our own
version of `toolz` , named `my_toolz` . To introduce our own package in the scope
of `withPackages` we used a `let` expression. You can see that we used
`ps.numpy` to select numpy from the nixpkgs package set (`ps`). We did not take
`toolz` from the Nixpkgs package set this time, but instead took our own version
that we introduced with the `let` expression.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
#### Handling dependencies {#handling-dependencies}
2016-02-21 19:13:44 +00:00
2018-10-10 00:42:29 +00:00
Our example, `toolz` , does not have any dependencies on other Python packages or
system libraries. According to the manual, `buildPythonPackage` uses the
arguments `buildInputs` and `propagatedBuildInputs` to specify dependencies. If
something is exclusively a build-time dependency, then the dependency should be
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
included in `buildInputs` , but if it is (also) a runtime dependency, then it
2018-10-10 00:42:29 +00:00
should be added to `propagatedBuildInputs` . Test dependencies are considered
build-time dependencies and passed to `checkInputs` .
2016-02-21 19:13:44 +00:00
The following example shows which arguments are given to `buildPythonPackage` in
order to build [`datashape` ](https://github.com/blaze/datashape ).
```nix
2021-07-03 11:37:24 +00:00
{ lib, buildPythonPackage, fetchPypi, numpy, multipledispatch, python-dateutil, pytest }:
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
buildPythonPackage rec {
pname = "datashape";
version = "0.4.7";
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-FLLvdm1MllKrgTGC6Gb0k0deZeVYvtCCLji/B7uhong=";
2019-03-23 02:50:30 +00:00
};
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
checkInputs = [ pytest ];
2021-07-03 11:37:24 +00:00
propagatedBuildInputs = [ numpy multipledispatch python-dateutil ];
2017-03-05 16:16:29 +00:00
2019-03-23 02:50:30 +00:00
meta = with lib; {
2020-02-16 16:31:03 +00:00
homepage = "https://github.com/ContinuumIO/datashape";
2019-03-23 02:50:30 +00:00
description = "A data description language";
license = licenses.bsd2;
maintainers = with maintainers; [ fridh ];
2016-02-21 19:13:44 +00:00
};
2017-03-05 16:16:29 +00:00
}
2016-02-21 19:13:44 +00:00
```
We can see several runtime dependencies, `numpy` , `multipledispatch` , and
2021-07-03 11:37:24 +00:00
`python-dateutil` . Furthermore, we have one `checkInputs` , i.e. `pytest` . `pytest` is a
2016-02-21 19:13:44 +00:00
test runner and is only used during the `checkPhase` and is therefore not added
to `propagatedBuildInputs` .
In the previous case we had only dependencies on other Python packages to consider.
Occasionally you have also system libraries to consider. E.g., `lxml` provides
Python bindings to `libxml2` and `libxslt` . These libraries are only required
when building the bindings and are therefore added as `buildInputs` .
```nix
2019-03-24 09:29:53 +00:00
{ lib, pkgs, buildPythonPackage, fetchPypi }:
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
buildPythonPackage rec {
pname = "lxml";
version = "3.4.4";
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-s9NiusRxFydHzaNRMjjxFcvWxfi45jGb9ql6eJJyQJk=";
2019-03-23 02:50:30 +00:00
};
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
buildInputs = [ pkgs.libxml2 pkgs.libxslt ];
2017-03-05 16:16:29 +00:00
2019-03-23 02:50:30 +00:00
meta = with lib; {
description = "Pythonic binding for the libxml2 and libxslt libraries";
2020-02-16 16:31:03 +00:00
homepage = "https://lxml.de";
2019-03-23 02:50:30 +00:00
license = licenses.bsd3;
maintainers = with maintainers; [ sjourdois ];
2016-02-21 19:13:44 +00:00
};
2017-03-05 16:16:29 +00:00
}
2016-02-21 19:13:44 +00:00
```
In this example `lxml` and Nix are able to work out exactly where the relevant
files of the dependencies are. This is not always the case.
2020-02-09 16:23:11 +00:00
The example below shows bindings to The Fastest Fourier Transform in the West,
commonly known as FFTW. On Nix we have separate packages of FFTW for the
different types of floats (`"single"`, `"double"` , `"long-double"` ). The
bindings need all three types, and therefore we add all three as `buildInputs` .
The bindings don't expect to find each of them in a different folder, and
therefore we have to set `LDFLAGS` and `CFLAGS` .
2016-02-21 19:13:44 +00:00
```nix
2019-03-24 09:29:53 +00:00
{ lib, pkgs, buildPythonPackage, fetchPypi, numpy, scipy }:
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
buildPythonPackage rec {
pname = "pyFFTW";
version = "0.9.2";
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-9ru2r6kwhUCaskiFoaPNuJCfCVoUL01J40byvRt4kHQ=";
2019-03-23 02:50:30 +00:00
};
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
buildInputs = [ pkgs.fftw pkgs.fftwFloat pkgs.fftwLongDouble];
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
propagatedBuildInputs = [ numpy scipy ];
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
# Tests cannot import pyfftw. pyfftw works fine though.
doCheck = false;
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
preConfigure = ''
export LDFLAGS="-L${pkgs.fftw.dev}/lib -L${pkgs.fftwFloat.out}/lib -L${pkgs.fftwLongDouble.out}/lib"
export CFLAGS="-I${pkgs.fftw.dev}/include -I${pkgs.fftwFloat.dev}/include -I${pkgs.fftwLongDouble.dev}/include"
2019-03-24 09:29:53 +00:00
'';
2017-03-05 16:16:29 +00:00
2019-03-23 02:50:30 +00:00
meta = with lib; {
description = "A pythonic wrapper around FFTW, the FFT library, presenting a unified interface for all the supported transforms";
2020-04-18 11:43:47 +00:00
homepage = "http://hgomersall.github.com/pyFFTW";
2019-03-23 02:50:30 +00:00
license = with licenses; [ bsd2 bsd3 ];
maintainers = with maintainers; [ fridh ];
2016-02-21 19:13:44 +00:00
};
2017-03-05 16:16:29 +00:00
}
2016-02-21 19:13:44 +00:00
```
2021-06-05 19:22:45 +00:00
2016-02-21 19:13:44 +00:00
Note also the line `doCheck = false;` , we explicitly disabled running the test-suite.
2021-06-05 19:22:45 +00:00
#### Testing Python Packages {#testing-python-packages}
2020-08-17 17:23:45 +00:00
It is highly encouraged to have testing as part of the package build. This
helps to avoid situations where the package was able to build and install,
but is not usable at runtime. Currently, all packages will use the `test`
2020-08-17 20:33:43 +00:00
command provided by the setup.py (i.e. `python setup.py test` ). However,
this is currently deprecated https://github.com/pypa/setuptools/pull/1878
and your package should provide its own checkPhase.
2020-08-17 17:23:45 +00:00
*NOTE:* The `checkPhase` for python maps to the `installCheckPhase` on a
normal derivation. This is due to many python packages not behaving well
to the pre-installed version of the package. Version info, and natively
compiled extensions generally only exist in the install directory, and
thus can cause issues when a test suite asserts on that behavior.
*NOTE:* Tests should only be disabled if they don't agree with nix
(e.g. external dependencies, network access, flakey tests), however,
as many tests should be enabled as possible. Failing tests can still be
a good indication that the package is not in a valid state.
2021-06-05 19:22:45 +00:00
#### Using pytest {#using-pytest}
2020-08-17 17:23:45 +00:00
Pytest is the most common test runner for python repositories. A trivial
test run would be:
2021-06-05 19:22:45 +00:00
2020-08-17 17:23:45 +00:00
```
checkInputs = [ pytest ];
2023-01-03 13:28:23 +00:00
checkPhase = ''
runHook preCheck
pytest
runHook postCheck
'';
2020-08-17 17:23:45 +00:00
```
2020-09-20 23:31:16 +00:00
However, many repositories' test suites do not translate well to nix's build
2020-08-17 17:23:45 +00:00
sandbox, and will generally need many tests to be disabled.
To filter tests using pytest, one can do the following:
2021-06-05 19:22:45 +00:00
2020-08-17 17:23:45 +00:00
```
checkInputs = [ pytest ];
# avoid tests which need additional data or touch network
checkPhase = ''
2023-01-03 13:28:23 +00:00
runHook preCheck
2020-08-17 17:23:45 +00:00
pytest tests/ --ignore=tests/integration -k 'not download and not update'
2023-01-03 13:28:23 +00:00
runHook postCheck
2020-08-17 17:23:45 +00:00
'';
```
`--ignore` will tell pytest to ignore that file or directory from being
collected as part of a test run. This is useful is a file uses a package
which is not available in nixpkgs, thus skipping that test file is much
easier than having to create a new package.
`-k` is used to define a predicate for test names. In this example, we are
filtering out tests which contain `download` or `update` in their test case name.
2021-06-05 19:22:45 +00:00
Only one `-k` argument is allowed, and thus a long predicate should be concatenated
with “\\” and wrapped to the next line.
2020-08-17 17:23:45 +00:00
2021-06-05 19:22:45 +00:00
*NOTE:* In pytest==6.0.1, the use of “\\” to continue a line (e.g. `-k 'not download \'` ) has
2020-08-17 17:23:45 +00:00
been removed, in this case, it's recommended to use `pytestCheckHook` .
2021-06-05 19:22:45 +00:00
#### Using pytestCheckHook {#using-pytestcheckhook}
2020-08-17 17:23:45 +00:00
`pytestCheckHook` is a convenient hook which will substitute the setuptools
2022-06-21 07:03:18 +00:00
`test` command for a `checkPhase` which runs `pytest` . This is also beneficial
2020-08-17 17:23:45 +00:00
when a package may need many items disabled to run the test suite.
2022-12-17 23:21:48 +00:00
Using the example above, the analogous `pytestCheckHook` usage would be:
2021-06-05 19:22:45 +00:00
2020-08-17 17:23:45 +00:00
```
checkInputs = [ pytestCheckHook ];
# requires additional data
pytestFlagsArray = [ "tests/" "--ignore=tests/integration" ];
disabledTests = [
# touches network
"download"
"update"
];
2021-01-05 23:32:27 +00:00
2021-02-14 22:54:55 +00:00
disabledTestPaths = [
2021-01-05 23:32:27 +00:00
"tests/test_failing.py"
];
2020-08-17 17:23:45 +00:00
```
2022-12-17 23:21:48 +00:00
This is especially useful when tests need to be conditionally disabled,
2020-08-17 17:23:45 +00:00
for example:
```
disabledTests = [
# touches network
"download"
"update"
] ++ lib.optionals (pythonAtLeast "3.8") [
# broken due to python3.8 async changes
"async"
] ++ lib.optionals stdenv.isDarwin [
# can fail when building with other packages
"socket"
];
```
2022-06-21 07:03:18 +00:00
Trying to concatenate the related strings to disable tests in a regular
`checkPhase` would be much harder to read. This also enables us to comment on
why specific tests are disabled.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
#### Using pythonImportsCheck {#using-pythonimportscheck}
2020-08-17 20:33:43 +00:00
2022-06-21 07:03:18 +00:00
Although unit tests are highly preferred to validate correctness of a package, not
all packages have test suites that can be run easily, and some have none at all.
2020-08-17 20:33:43 +00:00
To help ensure the package still works, `pythonImportsCheck` can attempt to import
the listed modules.
```
pythonImportsCheck = [ "requests" "urllib" ];
```
2022-06-21 07:03:18 +00:00
2020-08-17 20:33:43 +00:00
roughly translates to:
2022-06-21 07:03:18 +00:00
2020-08-17 20:33:43 +00:00
```
postCheck = ''
PYTHONPATH=$out/${python.sitePackages}:$PYTHONPATH
python -c "import requests; import urllib"
'';
```
2022-06-21 07:03:18 +00:00
However, this is done in its own phase, and not dependent on whether `doCheck = true;` .
2020-08-17 20:33:43 +00:00
This can also be useful in verifying that the package doesn't assume commonly
2022-06-21 07:03:18 +00:00
present packages (e.g. `setuptools` ).
2020-08-17 20:33:43 +00:00
2022-05-29 12:50:04 +00:00
#### Using pythonRelaxDepsHook {#using-pythonrelaxdepshook}
2022-06-01 17:56:33 +00:00
It is common for upstream to specify a range of versions for its package
dependencies. This makes sense, since it ensures that the package will be built
2022-05-29 12:50:04 +00:00
with a subset of packages that is well tested. However, this commonly causes
issues when packaging in Nixpkgs, because the dependencies that this package
may need are too new or old for the package to build correctly. We also cannot
package multiple versions of the same package since this may cause conflicts
in `PYTHONPATH` .
One way to side step this issue is to relax the dependencies. This can be done
by either removing the package version range or by removing the package
declaration entirely. This can be done using the `pythonRelaxDepsHook` hook. For
example, given the following `requirements.txt` file:
```
pkg1< 1.0
pkg2
pkg3>=1.0,< =2.0
```
we can do:
```
nativeBuildInputs = [ pythonRelaxDepsHook ];
pythonRelaxDeps = [ "pkg1" "pkg3" ];
pythonRemoveDeps = [ "pkg2" ];
```
which would result in the following `requirements.txt` file:
```
pkg1
pkg3
```
Another option is to pass `true` , that will relax/remove all dependencies, for
example:
```
nativeBuildInputs = [ pythonRelaxDepsHook ];
pythonRelaxDeps = true;
```
which would result in the following `requirements.txt` file:
```
pkg1
pkg2
pkg3
```
In general you should always use `pythonRelaxDeps` , because `pythonRemoveDeps`
2022-06-21 07:03:18 +00:00
will convert build errors into runtime errors. However `pythonRemoveDeps` may
2022-05-29 12:50:04 +00:00
still be useful in exceptional cases, and also to remove dependencies wrongly
declared by upstream (for example, declaring `black` as a runtime dependency
instead of a dev dependency).
Keep in mind that while the examples above are done with `requirements.txt` ,
`pythonRelaxDepsHook` works by modifying the resulting wheel file, so it should
work in any of the formats supported by `buildPythonPackage` currently,
with the exception of `other` (see `format` in
[`buildPythonPackage` parameters ](#buildpythonpackage-parameters ) for more details).
2022-08-06 16:31:53 +00:00
### Using unittestCheckHook {#using-unittestcheckhook}
`unittestCheckHook` is a hook which will substitute the setuptools `test` command for a `checkPhase` which runs `python -m unittest discover` :
```
checkInputs = [ unittestCheckHook ];
unittestFlags = [ "-s" "tests" "-v" ];
```
2022-08-23 13:45:14 +00:00
##### Using sphinxHook {#using-sphinxhook}
The `sphinxHook` is a helpful tool to build documentation and manpages
using the popular Sphinx documentation generator.
It is setup to automatically find common documentation source paths and
render them using the default `html` style.
```
outputs = [
"out"
"doc"
];
nativeBuildInputs = [
sphinxHook
];
```
The hook will automatically build and install the artifact into the
`doc` output, if it exists. It also provides an automatic diversion
for the artifacts of the `man` builder into the `man` target.
```
outputs = [
"out"
"doc"
"man"
];
# Use multiple builders
sphinxBuilders = [
"singlehtml"
"man"
];
```
Overwrite `sphinxRoot` when the hook is unable to find your
documentation source root.
```
# Configure sphinxRoot for uncommon paths
sphinxRoot = "weird/docs/path";
```
The hook is also available to packages outside the python ecosystem by
2022-11-20 12:27:57 +00:00
referencing it using `sphinxHook` from top-level.
2022-08-23 13:45:14 +00:00
2021-06-05 19:22:45 +00:00
### Develop local package {#develop-local-package}
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
As a Python developer you're likely aware of [development mode ](http://setuptools.readthedocs.io/en/latest/setuptools.html#development-mode )
(`python setup.py develop`); instead of installing the package this command
creates a special link to the project code. That way, you can run updated code
without having to reinstall after each and every change you make. Development
mode is also available. Let's see how you can use it.
2016-02-21 19:13:44 +00:00
2022-06-21 07:03:18 +00:00
In the previous Nix expression the source was fetched from a url. We can also
2020-02-09 16:23:11 +00:00
refer to a local source instead using `src = ./path/to/source/tree;`
2016-02-21 19:13:44 +00:00
If we create a `shell.nix` file which calls `buildPythonPackage` , and if `src`
is a local source, and if the local source has a `setup.py` , then development
mode is activated.
2022-06-21 07:03:18 +00:00
In the following example, we create a simple environment that has a Python 3.9
2020-02-09 16:23:11 +00:00
version of our package in it, as well as its dependencies and other packages we
like to have in the environment, all specified with `propagatedBuildInputs` .
Indeed, we can just add any package we like to have in our environment to
`propagatedBuildInputs` .
2016-02-21 19:13:44 +00:00
```nix
2017-08-06 08:18:36 +00:00
with import < nixpkgs > {};
2022-05-25 23:03:43 +00:00
with python39Packages;
2016-02-21 19:13:44 +00:00
buildPythonPackage rec {
name = "mypackage";
src = ./path/to/package/source;
propagatedBuildInputs = [ pytest numpy pkgs.libsndfile ];
2017-03-05 16:16:29 +00:00
}
2016-02-21 19:13:44 +00:00
```
2020-02-09 16:23:11 +00:00
It is important to note that due to how development mode is implemented on Nix
it is not possible to have multiple packages simultaneously in development mode.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Organising your packages {#organising-your-packages}
2016-02-21 19:13:44 +00:00
So far we discussed how you can use Python on Nix, and how you can develop with
it. We've looked at how you write expressions to package Python packages, and we
looked at how you can create environments in which specified packages are
available.
At some point you'll likely have multiple packages which you would
like to be able to use in different projects. In order to minimise unnecessary
2018-07-26 12:19:45 +00:00
duplication we now look at how you can maintain a repository with your
2016-02-21 19:13:44 +00:00
own packages. The important functions here are `import` and `callPackage` .
2021-06-05 19:22:45 +00:00
### Including a derivation using `callPackage` {#including-a-derivation-using-callpackage}
2016-02-21 19:13:44 +00:00
2016-05-29 14:30:29 +00:00
Earlier we created a Python environment using `withPackages` , and included the
2016-02-21 19:13:44 +00:00
`toolz` package via a `let` expression.
Let's split the package definition from the environment definition.
We first create a function that builds `toolz` in `~/path/to/toolz/release.nix`
```nix
2019-03-24 09:33:07 +00:00
{ lib, buildPythonPackage }:
2016-02-21 19:13:44 +00:00
buildPythonPackage rec {
2018-01-16 16:59:30 +00:00
pname = "toolz";
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
version = "0.10.0";
2016-02-21 19:13:44 +00:00
2018-01-16 16:59:30 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-CP3V73yWSArRHBLUct4hrNMjWZlvaaUlkpm1QP66RWA=";
2016-02-21 19:13:44 +00:00
};
2018-07-03 15:19:18 +00:00
meta = with lib; {
2019-04-22 08:14:28 +00:00
homepage = "https://github.com/pytoolz/toolz/";
2016-02-21 19:13:44 +00:00
description = "List processing tools and functional utilities";
license = licenses.bsd3;
maintainers = with maintainers; [ fridh ];
};
2017-03-05 16:16:29 +00:00
}
2016-02-21 19:13:44 +00:00
```
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
It takes an argument `buildPythonPackage` . We now call this function using
`callPackage` in the definition of our environment
2016-02-21 19:13:44 +00:00
```nix
with import < nixpkgs > {};
( let
2019-03-24 09:33:07 +00:00
toolz = callPackage /path/to/toolz/release.nix {
2020-05-09 16:58:00 +00:00
buildPythonPackage = python38Packages.buildPythonPackage;
2017-03-05 16:16:29 +00:00
};
2020-05-09 16:58:00 +00:00
in python38.withPackages (ps: [ ps.numpy toolz ])
2016-02-21 19:13:44 +00:00
).env
```
Important to remember is that the Python version for which the package is made
depends on the `python` derivation that is passed to `buildPythonPackage` . Nix
tries to automatically pass arguments when possible, which is why generally you
don't explicitly define which `python` derivation should be used. In the above
2020-05-09 16:58:00 +00:00
example we use `buildPythonPackage` that is part of the set `python38Packages` ,
and in this case the `python38` interpreter is automatically used.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
## Reference {#reference}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Interpreters {#interpreters}
2016-02-21 19:13:44 +00:00
2022-05-25 23:03:43 +00:00
Versions 2.7, 3.7, 3.8, 3.9 and 3.10 of the CPython interpreter are available
as respectively `python27` , `python37` , `python38` , `python39` and `python310` .
The aliases `python2` and `python3` correspond to respectively `python27` and
2021-03-13 13:14:06 +00:00
`python39` . The attribute `python` maps to `python2` . The PyPy interpreters
compatible with Python 2.7 and 3 are available as `pypy27` and `pypy3` , with
aliases `pypy2` mapping to `pypy27` and `pypy` mapping to `pypy2` . The Nix
expressions for the interpreters can be found in
2020-02-09 16:23:11 +00:00
`pkgs/development/interpreters/python` .
2016-02-21 19:13:44 +00:00
All packages depending on any Python interpreter get appended
`out/{python.sitePackages}` to `$PYTHONPATH` if such directory
exists.
2021-06-05 19:22:45 +00:00
#### Missing `tkinter` module standard library {#missing-tkinter-module-standard-library}
2016-10-10 07:54:29 +00:00
2016-10-14 15:49:51 +00:00
To reduce closure size the `Tkinter` /`tkinter` is available as a separate package, `pythonPackages.tkinter` .
2016-10-10 07:54:29 +00:00
2021-06-05 19:22:45 +00:00
#### Attributes on interpreters packages {#attributes-on-interpreters-packages}
2016-02-21 19:13:44 +00:00
Each interpreter has the following attributes:
- `libPrefix` . Name of the folder in `${python}/lib/` for corresponding interpreter.
- `interpreter` . Alias for `${python}/bin/${executable}` .
- `buildEnv` . Function to build python interpreter environments with extra packages bundled together. See section *python.buildEnv function* for usage and documentation.
2016-05-29 14:30:29 +00:00
- `withPackages` . Simpler interface to `buildEnv` . See section *python.withPackages function* for usage and documentation.
2016-02-21 19:13:44 +00:00
- `sitePackages` . Alias for `lib/${libPrefix}/site-packages` .
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
- `executable` . Name of the interpreter executable, e.g. `python3.8` .
2016-12-04 10:55:25 +00:00
- `pkgs` . Set of Python packages for that specific interpreter. The package set can be modified by overriding the interpreter and passing `packageOverrides` .
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Optimizations {#optimizations}
2020-12-30 13:49:10 +00:00
2022-06-21 07:03:18 +00:00
The Python interpreters are by default not built with optimizations enabled, because
2020-12-30 13:49:10 +00:00
the builds are in that case not reproducible. To enable optimizations, override the
interpreter of interest, e.g using
```
let
pkgs = import ./. {};
mypython = pkgs.python3.override {
enableOptimizations = true;
reproducibleBuild = false;
self = mypython;
};
in mypython
```
2021-06-05 19:22:45 +00:00
### Building packages and applications {#building-packages-and-applications}
2016-02-21 19:13:44 +00:00
2016-12-04 09:16:14 +00:00
Python libraries and applications that use `setuptools` or
2019-04-23 09:37:10 +00:00
`distutils` are typically built with respectively the `buildPythonPackage` and
2016-12-04 09:16:14 +00:00
`buildPythonApplication` functions. These two functions also support installing a `wheel` .
2016-02-21 19:13:44 +00:00
All Python packages reside in `pkgs/top-level/python-packages.nix` and all
2020-02-09 16:23:11 +00:00
applications elsewhere. In case a package is used as both a library and an
application, then the package should be in `pkgs/top-level/python-packages.nix`
since only those packages are made available for all interpreter versions. The
preferred location for library expressions is in
2016-02-21 19:13:44 +00:00
`pkgs/development/python-modules` . It is important that these packages are
2016-12-04 09:16:14 +00:00
called from `pkgs/top-level/python-packages.nix` and not elsewhere, to guarantee
2016-02-21 19:13:44 +00:00
the right version of the package is built.
Based on the packages defined in `pkgs/top-level/python-packages.nix` an
attribute set is created for each available Python interpreter. The available
sets are
* `pkgs.python27Packages`
2018-01-24 15:10:08 +00:00
* `pkgs.python37Packages`
2020-08-13 04:57:40 +00:00
* `pkgs.python38Packages`
* `pkgs.python39Packages`
2021-10-05 00:07:35 +00:00
* `pkgs.python310Packages`
2021-11-13 13:28:38 +00:00
* `pkgs.python311Packages`
2016-02-21 19:13:44 +00:00
* `pkgs.pypyPackages`
and the aliases
2016-10-18 08:29:22 +00:00
* `pkgs.python2Packages` pointing to `pkgs.python27Packages`
2021-06-30 06:54:02 +00:00
* `pkgs.python3Packages` pointing to `pkgs.python39Packages`
2016-12-04 09:16:14 +00:00
* `pkgs.pythonPackages` pointing to `pkgs.python2Packages`
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
#### `buildPythonPackage` function {#buildpythonpackage-function}
2016-02-21 19:13:44 +00:00
The `buildPythonPackage` function is implemented in
2022-06-21 07:03:18 +00:00
`pkgs/development/interpreters/python/mk-python-derivation.nix`
2019-07-17 18:36:47 +00:00
using setup hooks.
2016-02-21 19:13:44 +00:00
2016-12-04 09:16:14 +00:00
The following is an example:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```nix
2021-06-03 10:09:11 +00:00
{ lib, buildPythonPackage, fetchPypi, hypothesis, setuptools-scm, attrs, py, setuptools, six, pluggy }:
2016-02-21 19:13:44 +00:00
2018-01-16 16:59:30 +00:00
buildPythonPackage rec {
pname = "pytest";
2018-10-10 00:42:29 +00:00
version = "3.3.1";
2016-02-21 19:13:44 +00:00
2018-01-16 16:59:30 +00:00
src = fetchPypi {
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-z4Q23FnYaVNG/NOrKW3kZCXsqwDWQJbOvnn7Ueyy65M=";
2018-01-16 16:59:30 +00:00
};
2016-02-21 19:13:44 +00:00
2018-10-11 20:18:33 +00:00
postPatch = ''
2018-10-10 00:42:29 +00:00
# don't test bash builtins
rm testing/test_argcomplete.py
'';
2018-01-16 16:59:30 +00:00
checkInputs = [ hypothesis ];
2021-06-03 10:09:11 +00:00
nativeBuildInputs = [ setuptools-scm ];
2018-01-16 16:59:30 +00:00
propagatedBuildInputs = [ attrs py setuptools six pluggy ];
2018-10-10 00:42:29 +00:00
meta = with lib; {
2018-01-16 16:59:30 +00:00
maintainers = with maintainers; [ domenkozar lovek323 madjar lsix ];
description = "Framework for writing tests";
2017-03-05 16:16:29 +00:00
};
}
```
2016-02-21 19:13:44 +00:00
The `buildPythonPackage` mainly does four things:
2016-08-15 09:35:32 +00:00
* In the `buildPhase` , it calls `${python.interpreter} setup.py bdist_wheel` to
build a wheel binary zipfile.
2016-02-21 19:13:44 +00:00
* In the `installPhase` , it installs the wheel file using `pip install *.whl` .
2016-08-15 09:35:32 +00:00
* In the `postFixup` phase, the `wrapPythonPrograms` bash function is called to
wrap all programs in the `$out/bin/*` directory to include `$PATH`
environment variable and add dependent libraries to script's `sys.path` .
2022-06-21 07:03:18 +00:00
* In the `installCheck` phase, `${python.interpreter} setup.py test` is run.
2016-02-21 19:13:44 +00:00
By default tests are run because `doCheck = true` . Test dependencies, like
2018-05-30 17:07:02 +00:00
e.g. the test runner, should be added to `checkInputs` .
2016-02-21 19:13:44 +00:00
By default `meta.platforms` is set to the same value
2017-09-01 17:38:07 +00:00
as the interpreter unless overridden otherwise.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
##### `buildPythonPackage` parameters {#buildpythonpackage-parameters}
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
All parameters from `stdenv.mkDerivation` function are still supported. The
following are specific to `buildPythonPackage` :
2018-05-30 17:07:02 +00:00
2020-02-09 16:23:11 +00:00
* `catchConflicts ? true` : If `true` , abort package build if a package name
appears more than once in dependency tree. Default is `true` .
2022-06-21 07:03:18 +00:00
* `disabled ? false` : If `true` , package is not built for the particular Python
2020-02-09 16:23:11 +00:00
interpreter version.
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
* `dontWrapPythonPrograms ? false` : Skip wrapping of Python programs.
2020-02-09 16:23:11 +00:00
* `permitUserSite ? false` : Skip setting the `PYTHONNOUSERSITE` environment
variable in wrapped programs.
* `format ? "setuptools"` : Format of the source. Valid options are
`"setuptools"` , `"pyproject"` , `"flit"` , `"wheel"` , and `"other"` .
`"setuptools"` is for when the source has a `setup.py` and `setuptools` is
used to build a wheel, `flit` , in case `flit` should be used to build a wheel,
and `wheel` in case a wheel is provided. Use `other` when a custom
`buildPhase` and/or `installPhase` is needed.
* `makeWrapperArgs ? []` : A list of strings. Arguments to be passed to
`makeWrapper` , which wraps generated binaries. By default, the arguments to
`makeWrapper` set `PATH` and `PYTHONPATH` environment variables before calling
the binary. Additional arguments here can allow a developer to set environment
variables which will be available when the binary is run. For example,
`makeWrapperArgs = ["--set FOO BAR" "--set BAZ QUX"]` .
* `namePrefix` : Prepends text to `${name}` parameter. In case of libraries, this
2020-05-09 16:58:00 +00:00
defaults to `"python3.8-"` for Python 3.8, etc., and in case of applications
2020-02-09 16:23:11 +00:00
to `""` .
2020-06-06 10:46:00 +00:00
* `pipInstallFlags ? []` : A list of strings. Arguments to be passed to `pip
install`. To pass options to `python setup.py install` , use
`--install-option` . E.g., `pipInstallFlags=["--install-option='--cpp_implementation'"]` .
2020-02-09 16:23:11 +00:00
* `pythonPath ? []` : List of packages to be added into `$PYTHONPATH` . Packages
in `pythonPath` are not propagated (contrary to `propagatedBuildInputs` ).
2016-02-21 19:13:44 +00:00
* `preShellHook` : Hook to execute commands before `shellHook` .
* `postShellHook` : Hook to execute commands after `shellHook` .
2020-02-09 16:23:11 +00:00
* `removeBinByteCode ? true` : Remove bytecode from `/bin` . Bytecode is only
created when the filenames end with `.py` .
2019-07-13 11:26:39 +00:00
* `setupPyGlobalFlags ? []` : List of flags passed to `setup.py` command.
2018-05-30 17:07:02 +00:00
* `setupPyBuildFlags ? []` : List of flags passed to `setup.py build_ext` command.
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
The `stdenv.mkDerivation` function accepts various parameters for describing
build inputs (see "Specifying dependencies"). The following are of special
interest for Python packages, either because these are primarily used, or
because their behaviour is different:
* `nativeBuildInputs ? []` : Build-time only dependencies. Typically executables
as well as the items listed in `setup_requires` .
2021-03-14 10:49:35 +00:00
* `buildInputs ? []` : Build and/or run-time dependencies that need to be
2020-02-09 16:23:11 +00:00
compiled for the host machine. Typically non-Python libraries which are being
linked.
* `checkInputs ? []` : Dependencies needed for running the `checkPhase` . These
are added to `nativeBuildInputs` when `doCheck = true` . Items listed in
`tests_require` go here.
* `propagatedBuildInputs ? []` : Aside from propagating dependencies,
`buildPythonPackage` also injects code into and wraps executables with the
paths included in this list. Items listed in `install_requires` go here.
2019-01-05 09:26:57 +00:00
2021-06-05 19:22:45 +00:00
##### Overriding Python packages {#overriding-python-packages}
2017-03-21 09:08:10 +00:00
2020-02-09 16:23:11 +00:00
The `buildPythonPackage` function has a `overridePythonAttrs` method that can be
used to override the package. In the following example we create an environment
where we have the `blaze` package using an older version of `pandas` . We
override first the Python interpreter and pass `packageOverrides` which contains
the overrides for packages in the package set.
2017-03-21 09:08:10 +00:00
```nix
with import < nixpkgs > {};
(let
python = let
packageOverrides = self: super: {
2017-08-12 06:58:06 +00:00
pandas = super.pandas.overridePythonAttrs(old: rec {
2017-03-21 09:08:10 +00:00
version = "0.19.1";
src = super.fetchPypi {
pname = "pandas";
inherit version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-JQn+rtpy/OA2deLszSKEuxyttqBzcAil50H+JDHUdCE=";
2017-03-21 09:08:10 +00:00
};
});
};
2019-07-05 11:55:45 +00:00
in pkgs.python3.override {inherit packageOverrides; self = python;};
2017-03-21 09:08:10 +00:00
in python.withPackages(ps: [ps.blaze])).env
```
2022-02-25 13:09:41 +00:00
#### Optional extra dependencies
Some packages define optional dependencies for additional features. With
2022-05-22 14:27:48 +00:00
`setuptools` this is called `extras_require` and `flit` calls it
`extras-require` , while PEP 621 calls these `optional-dependencies` . A
2022-02-25 13:09:41 +00:00
method for supporting this is by declaring the extras of a package in its
`passthru` , e.g. in case of the package `dask`
```nix
2022-05-22 14:27:48 +00:00
passthru.optional-dependencies = {
2022-02-25 13:09:41 +00:00
complete = [ distributed ];
};
```
and letting the package requiring the extra add the list to its dependencies
```nix
propagatedBuildInputs = [
...
2022-05-22 14:27:48 +00:00
] ++ dask.optional-dependencies.complete;
2022-02-25 13:09:41 +00:00
```
Note this method is preferred over adding parameters to builders, as that can
result in packages depending on different variants and thereby causing
collisions.
2021-06-05 19:22:45 +00:00
#### `buildPythonApplication` function {#buildpythonapplication-function}
2016-02-21 19:13:44 +00:00
2018-08-26 07:31:39 +00:00
The `buildPythonApplication` function is practically the same as
`buildPythonPackage` . The main purpose of this function is to build a Python
package where one is interested only in the executables, and not importable
modules. For that reason, when adding this package to a `python.buildEnv` , the
modules won't be made available.
Another difference is that `buildPythonPackage` by default prefixes the names of
the packages with the version of the interpreter. Because this is irrelevant for
applications, the prefix is omitted.
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
When packaging a Python application with `buildPythonApplication` , it should be
2018-10-11 20:18:33 +00:00
called with `callPackage` and passed `python` or `pythonPackages` (possibly
specifying an interpreter version), like this:
```nix
2021-12-10 21:42:03 +00:00
{ lib, python3 }:
2018-10-11 20:18:33 +00:00
2021-12-10 21:42:03 +00:00
python3.pkgs.buildPythonApplication rec {
2018-10-11 20:18:33 +00:00
pname = "luigi";
version = "2.7.9";
2021-12-10 21:42:03 +00:00
src = python3.pkgs.fetchPypi {
2018-10-11 20:18:33 +00:00
inherit pname version;
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-Pe229rT0aHwA98s+nTHQMEFKZPo/yw6sot8MivFDvAw=";
2018-10-11 20:18:33 +00:00
};
2021-12-10 21:42:03 +00:00
propagatedBuildInputs = with python3.pkgs; [ tornado python-daemon ];
2018-10-11 20:18:33 +00:00
meta = with lib; {
...
};
}
```
This is then added to `all-packages.nix` just as any other application would be.
```nix
luigi = callPackage ../applications/networking/cluster/luigi { };
```
Since the package is an application, a consumer doesn't need to care about
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Python versions or modules, which is why they don't go in `pythonPackages` .
2018-10-10 00:42:29 +00:00
2021-06-05 19:22:45 +00:00
#### `toPythonApplication` function {#topythonapplication-function}
2018-05-30 17:07:02 +00:00
A distinction is made between applications and libraries, however, sometimes a
package is used as both. In this case the package is added as a library to
`python-packages.nix` and as an application to `all-packages.nix` . To reduce
duplication the `toPythonApplication` can be used to convert a library to an
application.
The Nix expression shall use `buildPythonPackage` and be called from
`python-packages.nix` . A reference shall be created from `all-packages.nix` to
the attribute in `python-packages.nix` , and the `toPythonApplication` shall be
applied to the reference:
2021-06-05 19:22:45 +00:00
2018-05-30 17:07:02 +00:00
```nix
youtube-dl = with pythonPackages; toPythonApplication youtube-dl;
```
2021-06-05 19:22:45 +00:00
#### `toPythonModule` function {#topythonmodule-function}
2018-05-30 17:07:02 +00:00
In some cases, such as bindings, a package is created using
2020-02-09 16:23:11 +00:00
`stdenv.mkDerivation` and added as attribute in `all-packages.nix` . The Python
bindings should be made available from `python-packages.nix` . The
`toPythonModule` function takes a derivation and makes certain Python-specific
modifications.
2018-05-30 17:07:02 +00:00
```nix
opencv = toPythonModule (pkgs.opencv.override {
enablePython = true;
pythonPackages = self;
});
```
2020-02-09 16:23:11 +00:00
2018-05-30 17:07:02 +00:00
Do pay attention to passing in the right Python version!
2021-06-05 19:22:45 +00:00
#### `python.buildEnv` function {#python.buildenv-function}
2016-02-21 19:13:44 +00:00
Python environments can be created using the low-level `pkgs.buildEnv` function.
This example shows how to create an environment that has the Pyramid Web Framework.
Saving the following as `default.nix`
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2016-02-21 19:13:44 +00:00
2017-03-05 16:16:29 +00:00
python.buildEnv.override {
2019-03-23 02:50:30 +00:00
extraLibs = [ pythonPackages.pyramid ];
2017-03-05 16:16:29 +00:00
ignoreCollisions = true;
}
```
2016-02-21 19:13:44 +00:00
and running `nix-build` will create
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```
/nix/store/cf1xhjwzmdki7fasgr4kz6di72ykicl5-python-2.7.8-env
```
2016-02-21 19:13:44 +00:00
with wrapped binaries in `bin/` .
You can also use the `env` attribute to create local environments with needed
packages installed. This is somewhat comparable to `virtualenv` . For example,
running `nix-shell` with the following `shell.nix`
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2016-02-21 19:13:44 +00:00
2017-03-05 16:16:29 +00:00
(python3.buildEnv.override {
2017-05-07 10:55:45 +00:00
extraLibs = with python3Packages; [ numpy requests ];
2017-03-05 16:16:29 +00:00
}).env
```
2016-02-21 19:13:44 +00:00
will drop you into a shell where Python will have the
specified packages in its path.
2021-06-05 19:22:45 +00:00
##### `python.buildEnv` arguments {#python.buildenv-arguments}
2016-02-21 19:13:44 +00:00
* `extraLibs` : List of packages installed inside the environment.
* `postBuild` : Shell command executed after the build of environment.
* `ignoreCollisions` : Ignore file collisions inside the environment (default is `false` ).
2020-02-09 16:23:11 +00:00
* `permitUserSite` : Skip setting the `PYTHONNOUSERSITE` environment variable in
wrapped binaries in the environment.
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
#### `python.withPackages` function {#python.withpackages-function}
2016-05-29 14:08:27 +00:00
The `python.withPackages` function provides a simpler interface to the `python.buildEnv` functionality.
2017-03-05 00:00:02 +00:00
It takes a function as an argument that is passed the set of python packages and returns the list
2016-05-29 14:08:27 +00:00
of the packages to be included in the environment. Using the `withPackages` function, the previous
example for the Pyramid Web Framework environment can be written like this:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2016-05-29 14:08:27 +00:00
2017-03-05 16:16:29 +00:00
python.withPackages (ps: [ps.pyramid])
```
2016-05-29 14:08:27 +00:00
2020-02-09 16:23:11 +00:00
`withPackages` passes the correct package set for the specific interpreter
version as an argument to the function. In the above example, `ps` equals
`pythonPackages` . But you can also easily switch to using python3:
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2017-03-05 00:00:02 +00:00
2017-03-05 16:16:29 +00:00
python3.withPackages (ps: [ps.pyramid])
```
2016-05-29 14:08:27 +00:00
Now, `ps` is set to `python3Packages` , matching the version of the interpreter.
2020-02-09 16:23:11 +00:00
As `python.withPackages` simply uses `python.buildEnv` under the hood, it also
supports the `env` attribute. The `shell.nix` file from the previous section can
thus be also written like this:
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2016-05-29 14:08:27 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
(python38.withPackages (ps: [ps.numpy ps.requests])).env
2017-03-05 16:16:29 +00:00
```
2016-05-29 14:08:27 +00:00
2020-02-09 16:23:11 +00:00
In contrast to `python.buildEnv` , `python.withPackages` does not support the
more advanced options such as `ignoreCollisions = true` or `postBuild` . If you
need them, you have to use `python.buildEnv` .
2016-05-29 14:08:27 +00:00
2020-02-09 16:23:11 +00:00
Python 2 namespace packages may provide `__init__.py` that collide. In that case
`python.buildEnv` should be used with `ignoreCollisions = true` .
2017-04-18 07:05:00 +00:00
2021-06-05 19:22:45 +00:00
#### Setup hooks {#setup-hooks}
2019-07-17 18:36:47 +00:00
2020-02-09 16:23:11 +00:00
The following are setup hooks specifically for Python packages. Most of these
are used in `buildPythonPackage` .
2019-07-17 18:36:47 +00:00
2020-02-09 16:23:11 +00:00
- `eggUnpackhook` to move an egg to the correct folder so it can be installed
with the `eggInstallHook`
2020-01-08 13:29:03 +00:00
- `eggBuildHook` to skip building for eggs.
- `eggInstallHook` to install eggs.
2019-07-17 18:36:47 +00:00
- `flitBuildHook` to build a wheel using `flit` .
2020-02-09 16:23:11 +00:00
- `pipBuildHook` to build a wheel using `pip` and PEP 517. Note a build system
(e.g. `setuptools` or `flit` ) should still be added as `nativeBuildInput` .
2019-07-17 18:36:47 +00:00
- `pipInstallHook` to install wheels.
2020-08-17 17:23:45 +00:00
- `pytestCheckHook` to run tests with `pytest` . See [example usage ](#using-pytestcheckhook ).
2019-07-17 18:36:47 +00:00
- `pythonCatchConflictsHook` to check whether a Python package is not already existing.
- `pythonImportsCheckHook` to check whether importing the listed modules works.
2022-08-24 21:03:31 +00:00
- `pythonRelaxDepsHook` will relax Python dependencies restrictions for the package.
See [example usage ](#using-pythonrelaxdepshook ).
2019-07-17 18:36:47 +00:00
- `pythonRemoveBinBytecode` to remove bytecode from the `/bin` folder.
- `setuptoolsBuildHook` to build a wheel using `setuptools` .
- `setuptoolsCheckHook` to run tests with `python setup.py test` .
2022-08-23 13:45:14 +00:00
- `sphinxHook` to build documentation and manpages using Sphinx.
2020-02-09 16:23:11 +00:00
- `venvShellHook` to source a Python 3 `venv` at the `venvDir` location. A
2020-05-16 07:34:11 +00:00
`venv` is created if it does not yet exist. `postVenvCreation` can be used to
to run commands only after venv is first created.
2020-02-09 16:23:11 +00:00
- `wheelUnpackHook` to move a wheel to the correct folder so it can be installed
with the `pipInstallHook` .
2022-08-06 16:31:53 +00:00
- `unittestCheckHook` will run tests with `python -m unittest discover` . See [example usage ](#using-unittestcheckhook ).
2019-07-17 18:36:47 +00:00
2021-06-05 19:22:45 +00:00
### Development mode {#development-mode}
2016-02-21 19:13:44 +00:00
Development or editable mode is supported. To develop Python packages
`buildPythonPackage` has additional logic inside `shellPhase` to run `pip
install -e . --prefix $TMPDIR/`for the package.
Warning: `shellPhase` is executed only if `setup.py` exists.
Given a `default.nix` :
2021-06-05 19:22:45 +00:00
2017-03-05 16:16:29 +00:00
```nix
with import < nixpkgs > {};
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
pythonPackages.buildPythonPackage {
name = "myproject";
buildInputs = with pythonPackages; [ pyramid ];
2016-02-21 19:13:44 +00:00
2019-03-23 02:50:30 +00:00
src = ./.;
}
2017-03-05 16:16:29 +00:00
```
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
Running `nix-shell` with no arguments should give you the environment in which
the package would be built with `nix-build` .
2016-02-21 19:13:44 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
Shortcut to setup environments with C headers/libraries and Python packages:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```shell
nix-shell -p pythonPackages.pyramid zlib libjpeg git
```
2016-02-21 19:13:44 +00:00
Note: There is a boolean value `lib.inNixShell` set to `true` if nix-shell is invoked.
2021-06-05 19:22:45 +00:00
### Tools {#tools}
2016-02-21 19:13:44 +00:00
Packages inside nixpkgs are written by hand. However many tools exist in
community to help save time. No tool is preferred at the moment.
2020-02-09 16:23:11 +00:00
- [pypi2nix ](https://github.com/nix-community/pypi2nix ): Generate Nix
expressions for your Python project. Note that [sharing derivations from
pypi2nix with nixpkgs is possible but not
encouraged](https://github.com/nix-community/pypi2nix/issues/222#issuecomment-443497376).
2021-03-08 10:06:24 +00:00
- [nixpkgs-pytools ](https://github.com/nix-community/nixpkgs-pytools )
- [poetry2nix ](https://github.com/nix-community/poetry2nix )
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Deterministic builds {#deterministic-builds}
2017-02-22 14:55:58 +00:00
2020-02-09 16:23:11 +00:00
The Python interpreters are now built deterministically. Minor modifications had
to be made to the interpreters in order to generate deterministic bytecode. This
has security implications and is relevant for those using Python in a
`nix-shell` .
2017-02-22 14:55:58 +00:00
2020-02-09 16:23:11 +00:00
When the environment variable `DETERMINISTIC_BUILD` is set, all bytecode will
have timestamp 1. The `buildPythonPackage` function sets `DETERMINISTIC_BUILD=1`
2020-05-09 16:58:00 +00:00
and [PYTHONHASHSEED=0 ](https://docs.python.org/3.8/using/cmdline.html#envvar-PYTHONHASHSEED ).
2017-02-22 14:55:58 +00:00
Both are also exported in `nix-shell` .
2021-06-05 19:22:45 +00:00
### Automatic tests {#automatic-tests}
2017-09-02 10:06:37 +00:00
It is recommended to test packages as part of the build process.
Source distributions (`sdist`) often include test files, but not always.
By default the command `python setup.py test` is run as part of the
`checkPhase` , but often it is necessary to pass a custom `checkPhase` . An
example of such a situation is when `py.test` is used.
2021-06-05 19:22:45 +00:00
#### Common issues {#common-issues}
2017-09-02 10:06:37 +00:00
2020-02-09 16:23:11 +00:00
* Non-working tests can often be deselected. By default `buildPythonPackage`
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
runs `python setup.py test` . Most Python modules follows the standard test
2020-02-09 16:23:11 +00:00
protocol where the pytest runner can be used instead. `py.test` supports a
`-k` parameter to ignore test methods or classes:
2018-05-30 17:07:02 +00:00
2017-09-25 13:00:47 +00:00
```nix
buildPythonPackage {
# ...
# assumes the tests are located in tests
checkInputs = [ pytest ];
checkPhase = ''
2023-01-03 13:28:23 +00:00
runHook preCheck
2017-09-25 13:00:47 +00:00
py.test -k 'not function_name and not other_function' tests
2023-01-03 13:28:23 +00:00
runHook postCheck
2017-09-25 13:00:47 +00:00
'';
}
```
2021-06-05 19:22:45 +00:00
2020-02-09 16:23:11 +00:00
* Tests that attempt to access `$HOME` can be fixed by using the following
work-around before running tests (e.g. `preCheck` ): `export HOME=$(mktemp -d)`
2017-09-02 10:06:37 +00:00
2021-06-05 19:22:45 +00:00
## FAQ {#faq}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### How to solve circular dependencies? {#how-to-solve-circular-dependencies}
2016-02-21 19:13:44 +00:00
Consider the packages `A` and `B` that depend on each other. When packaging `B` ,
a solution is to override package `A` not to depend on `B` as an input. The same
should also be done when packaging `A` .
2021-06-05 19:22:45 +00:00
### How to override a Python package? {#how-to-override-a-python-package}
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
We can override the interpreter and pass `packageOverrides` . In the following
example we rename the `pandas` package and build it.
2016-12-04 10:55:25 +00:00
```nix
2016-02-21 19:13:44 +00:00
with import < nixpkgs > {};
2017-03-21 09:08:10 +00:00
(let
2016-12-04 10:55:25 +00:00
python = let
packageOverrides = self: super: {
2017-08-12 06:58:06 +00:00
pandas = super.pandas.overridePythonAttrs(old: {name="foo";});
2016-12-04 10:55:25 +00:00
};
2020-05-09 16:58:00 +00:00
in pkgs.python38.override {inherit packageOverrides;};
2016-02-21 19:13:44 +00:00
2017-03-21 09:08:10 +00:00
in python.withPackages(ps: [ps.pandas])).env
2016-02-21 19:13:44 +00:00
```
2020-02-09 16:23:11 +00:00
2017-03-21 09:08:10 +00:00
Using `nix-build` on this expression will build an environment that contains the
package `pandas` but with the new name `foo` .
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
All packages in the package set will use the renamed package. A typical use case
is to switch to another version of a certain package. For example, in the
Nixpkgs repository we have multiple versions of `django` and `scipy` . In the
following example we use a different version of `scipy` and create an
environment that uses it. All packages in the Python package set will now use
the updated `scipy` version.
2016-02-21 19:13:44 +00:00
2016-12-04 10:55:25 +00:00
```nix
with import < nixpkgs > {};
2017-03-05 16:16:29 +00:00
( let
packageOverrides = self: super: {
scipy = super.scipy_0_17;
};
2020-05-09 16:58:00 +00:00
in (pkgs.python38.override {inherit packageOverrides;}).withPackages (ps: [ps.blaze])
2016-05-29 14:30:29 +00:00
).env
2016-02-21 19:13:44 +00:00
```
2020-02-09 16:23:11 +00:00
2016-12-04 10:55:25 +00:00
The requested package `blaze` depends on `pandas` which itself depends on `scipy` .
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
If you want the whole of Nixpkgs to use your modifications, then you can use
`overlays` as explained in this manual. In the following example we build a
`inkscape` using a different version of `numpy` .
2017-03-05 16:16:29 +00:00
```nix
2016-12-04 10:55:25 +00:00
let
pkgs = import < nixpkgs > {};
2020-05-09 22:02:20 +00:00
newpkgs = import pkgs.path { overlays = [ (self: super: {
python38 = let
packageOverrides = python-self: python-super: {
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
numpy = python-super.numpy_1_18;
2016-12-04 10:55:25 +00:00
};
2020-05-09 22:02:20 +00:00
in super.python38.override {inherit packageOverrides;};
2016-12-17 18:05:21 +00:00
} ) ]; };
2016-12-04 10:55:25 +00:00
in newpkgs.inkscape
2016-08-30 15:06:17 +00:00
```
2021-06-05 19:22:45 +00:00
### `python setup.py bdist_wheel` cannot create .whl {#python-setup.py-bdist_wheel-cannot-create-.whl}
2016-08-13 12:18:59 +00:00
2022-06-21 07:03:18 +00:00
Executing `python setup.py bdist_wheel` in a `nix-shell` fails with
2016-08-13 12:18:59 +00:00
```
ValueError: ZIP does not support timestamps before 1980
```
2018-03-21 19:57:52 +00:00
2020-02-09 16:23:11 +00:00
This is because files from the Nix store (which have a timestamp of the UNIX
epoch of January 1, 1970) are included in the .ZIP, but .ZIP archives follow the
DOS convention of counting timestamps from 1980.
2018-03-21 19:57:52 +00:00
2020-02-09 16:23:11 +00:00
The command `bdist_wheel` reads the `SOURCE_DATE_EPOCH` environment variable,
which `nix-shell` sets to 1. Unsetting this variable or giving it a value
corresponding to 1980 or later enables building wheels.
2016-08-13 12:18:59 +00:00
Use 1980 as timestamp:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```shell
2016-08-30 15:16:13 +00:00
nix-shell --run "SOURCE_DATE_EPOCH=315532800 python3 setup.py bdist_wheel"
2016-08-13 12:18:59 +00:00
```
2020-02-09 16:23:11 +00:00
2016-08-13 12:18:59 +00:00
or the current time:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```shell
2016-08-30 15:16:13 +00:00
nix-shell --run "SOURCE_DATE_EPOCH=$(date +%s) python3 setup.py bdist_wheel"
2016-08-13 12:18:59 +00:00
```
2020-02-09 16:23:11 +00:00
2018-03-21 19:57:52 +00:00
or unset `SOURCE_DATE_EPOCH` :
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```shell
2016-08-30 15:16:13 +00:00
nix-shell --run "unset SOURCE_DATE_EPOCH; python3 setup.py bdist_wheel"
2016-12-04 10:55:25 +00:00
```
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### `install_data` / `data_files` problems {#install_data-data_files-problems}
2016-02-21 19:13:44 +00:00
If you get the following error:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```
could not create '/nix/store/6l1bvljpy8gazlsw2aw9skwwp4pmvyxw-python-2.7.8/etc':
Permission denied
```
2020-02-09 16:23:11 +00:00
This is a [known bug ](https://github.com/pypa/setuptools/issues/130 ) in
`setuptools` . Setuptools `install_data` does not respect `--prefix` . An example
of such package using the feature is `pkgs/tools/X11/xpra/default.nix` .
2016-02-21 19:13:44 +00:00
As workaround install it as an extra `preInstall` step:
2020-02-09 16:23:11 +00:00
2017-03-05 16:16:29 +00:00
```shell
${python.interpreter} setup.py install_data --install-dir=$out --root=$out
sed -i '/ = data\_files/d' setup.py
```
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Rationale of non-existent global site-packages {#rationale-of-non-existent-global-site-packages}
2016-02-21 19:13:44 +00:00
On most operating systems a global `site-packages` is maintained. This however
becomes problematic if you want to run multiple Python versions or have multiple
versions of certain libraries for your projects. Generally, you would solve such
issues by creating virtual environments using `virtualenv` .
On Nix each package has an isolated dependency tree which, in the case of
Python, guarantees the right versions of the interpreter and libraries or
packages are available. There is therefore no need to maintain a global `site-packages` .
If you want to create a Python environment for development, then the recommended
method is to use `nix-shell` , either with or without the `python.buildEnv`
function.
2021-06-05 19:22:45 +00:00
### How to consume Python modules using pip in a virtual environment like I am used to on other Operating Systems? {#how-to-consume-python-modules-using-pip-in-a-virtual-environment-like-i-am-used-to-on-other-operating-systems}
2017-01-12 16:00:50 +00:00
2020-02-09 16:23:11 +00:00
While this approach is not very idiomatic from Nix perspective, it can still be
useful when dealing with pre-existing projects or in situations where it's not
feasible or desired to write derivations for all required dependencies.
2020-01-12 17:27:17 +00:00
2020-02-09 16:23:11 +00:00
This is an example of a `default.nix` for a `nix-shell` , which allows to consume
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
a virtual environment created by `venv` , and install Python modules through
2020-02-09 16:23:11 +00:00
`pip` the traditional way.
2017-01-12 16:00:50 +00:00
2020-02-09 16:23:11 +00:00
Create this `default.nix` file, together with a `requirements.txt` and simply
execute `nix-shell` .
2017-01-12 16:00:50 +00:00
2017-03-05 16:16:29 +00:00
```nix
2020-01-12 17:27:17 +00:00
with import < nixpkgs > { };
2019-12-17 14:26:06 +00:00
let
2020-01-12 17:27:17 +00:00
pythonPackages = python3Packages;
in pkgs.mkShell rec {
2017-01-12 16:00:50 +00:00
name = "impurePythonEnv";
2020-01-12 17:27:17 +00:00
venvDir = "./.venv";
buildInputs = [
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
# A Python interpreter including the 'venv' module is required to bootstrap
2020-01-12 17:27:17 +00:00
# the environment.
pythonPackages.python
2019-03-23 02:50:30 +00:00
2022-06-21 07:03:18 +00:00
# This executes some shell code to initialize a venv in $venvDir before
2020-01-12 17:27:17 +00:00
# dropping into the shell
pythonPackages.venvShellHook
# Those are dependencies that we would like to use from nixpkgs, which will
# add them to PYTHONPATH and thus make them accessible from within the venv.
pythonPackages.numpy
pythonPackages.requests
2019-03-23 02:50:30 +00:00
2020-01-31 11:51:39 +00:00
# In this particular example, in order to compile any binary extensions they may
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
# require, the Python modules listed in the hypothetical requirements.txt need
2020-01-31 11:51:39 +00:00
# the following packages to be installed locally:
2017-01-12 16:00:50 +00:00
taglib
openssl
git
libxml2
libxslt
libzip
2019-03-23 02:50:30 +00:00
zlib
];
2020-05-16 07:34:11 +00:00
# Run this command, only after creating the virtual environment
postVenvCreation = ''
unset SOURCE_DATE_EPOCH
pip install -r requirements.txt
'';
2020-01-31 11:51:39 +00:00
# Now we can execute any commands within the virtual environment.
# This is optional and can be left out to run pip manually.
2020-01-12 17:27:17 +00:00
postShellHook = ''
2020-05-16 07:34:11 +00:00
# allow pip to install wheels
unset SOURCE_DATE_EPOCH
2020-01-12 17:27:17 +00:00
'';
}
```
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
In case the supplied venvShellHook is insufficient, or when Python 2 support is
2020-02-09 16:23:11 +00:00
needed, you can define your own shell hook and adapt to your needs like in the
following example:
2020-01-12 17:27:17 +00:00
```nix
with import < nixpkgs > { };
let
venvDir = "./.venv";
2020-01-31 11:51:39 +00:00
pythonPackages = python3Packages;
2020-01-12 17:27:17 +00:00
in pkgs.mkShell rec {
name = "impurePythonEnv";
buildInputs = [
2020-01-31 11:51:39 +00:00
pythonPackages.python
# Needed when using python 2.7
# pythonPackages.virtualenv
# ...
2020-01-12 17:27:17 +00:00
];
# This is very close to how venvShellHook is implemented, but
# adapted to use 'virtualenv'
2017-01-12 16:00:50 +00:00
shellHook = ''
2019-03-23 02:50:30 +00:00
SOURCE_DATE_EPOCH=$(date +%s)
2020-01-12 17:27:17 +00:00
if [ -d "${venvDir}" ]; then
echo "Skipping venv creation, '${venvDir}' already exists"
else
echo "Creating new venv environment in path: '${venvDir}'"
2020-01-31 11:51:39 +00:00
# Note that the module venv was only introduced in python 3, so for 2.7
# this needs to be replaced with a call to virtualenv
2020-01-12 17:27:17 +00:00
${pythonPackages.python.interpreter} -m venv "${venvDir}"
fi
# Under some circumstances it might be necessary to add your virtual
# environment to PYTHONPATH, which you can do here too;
2020-01-31 11:51:39 +00:00
# PYTHONPATH=$PWD/${venvDir}/${pythonPackages.python.sitePackages}/:$PYTHONPATH
2020-01-12 17:27:17 +00:00
source "${venvDir}/bin/activate"
2020-01-31 11:51:39 +00:00
# As in the previous example, this is optional.
2019-03-23 02:50:30 +00:00
pip install -r requirements.txt
2017-01-12 16:00:50 +00:00
'';
}
```
2016-02-21 19:13:44 +00:00
2017-01-12 16:59:27 +00:00
Note that the `pip install` is an imperative action. So every time `nix-shell`
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
is executed it will attempt to download the Python modules listed in
2017-01-12 16:59:27 +00:00
requirements.txt. However these will be cached locally within the `virtualenv`
folder and not downloaded again.
2021-06-05 19:22:45 +00:00
### How to override a Python package from `configuration.nix`? {#how-to-override-a-python-package-from-configuration.nix}
2017-03-20 23:06:51 +00:00
If you need to change a package's attribute(s) from `configuration.nix` you could do:
```nix
2018-07-25 19:29:25 +00:00
nixpkgs.config.packageOverrides = super: {
2022-10-28 12:00:00 +00:00
python3 = super.python3.override {
2018-07-25 19:29:25 +00:00
packageOverrides = python-self: python-super: {
2022-10-28 12:00:00 +00:00
twisted = python-super.twisted.overridePythonAttrs (oldAttrs: {
2021-09-16 22:47:45 +00:00
src = super.fetchPypi {
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
pname = "Twisted";
2020-09-27 07:33:46 +00:00
version = "19.10.0";
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-c5S6fycq5yKnTz2Wnc9Zm8TvCTvDkgOHSKSQ8XJKUV0=";
2020-09-27 07:33:46 +00:00
extension = "tar.bz2";
2017-03-20 23:06:51 +00:00
};
});
};
};
};
```
2020-09-27 07:33:46 +00:00
`pythonPackages.twisted` is now globally overridden.
All packages and also all NixOS services that reference `twisted`
(such as `services.buildbot-worker` ) now use the new definition.
Note that `python-super` refers to the old package set and `python-self`
to the new, overridden version.
2018-07-25 19:29:25 +00:00
2020-02-09 16:23:11 +00:00
To modify only a Python package set instead of a whole Python derivation, use
this snippet:
2018-07-25 19:29:25 +00:00
```nix
myPythonPackages = pythonPackages.override {
overrides = self: super: {
2020-09-27 07:33:46 +00:00
twisted = ...;
2018-07-25 19:29:25 +00:00
};
}
```
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### How to override a Python package using overlays? {#how-to-override-a-python-package-using-overlays}
2017-06-10 10:18:10 +00:00
2018-07-25 19:29:25 +00:00
Use the following overlay template:
2017-06-10 10:18:10 +00:00
```nix
2018-10-18 19:00:48 +00:00
self: super: {
2017-06-10 10:18:10 +00:00
python = super.python.override {
packageOverrides = python-self: python-super: {
2020-09-27 07:33:46 +00:00
twisted = python-super.twisted.overrideAttrs (oldAttrs: {
src = super.fetchPypi {
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
pname = "Twisted";
2020-09-27 07:33:46 +00:00
version = "19.10.0";
doc: use sri hash syntax
The nixpkgs manual contains references to both sri hash and explicit
sha256 attributes. This is at best confusing to new users. Since the
final destination is exclusive use of sri hashes, see nixos/rfcs#131,
might as well push new users in that direction gently.
Notable exceptions to sri hash support are builtins.fetchTarball,
cataclysm-dda, coq, dockerTools.pullimage, elixir.override, and
fetchCrate. None, other than builtins.fetchTarball, are fundamentally
incompatible, but all currently accept explicit sha256 attributes as
input. Because adding backwards compatibility is out of scope for this
change, they have been left intact, but migration to sri format has been
made for any using old hash formats.
All hashes have been manually tested to be accurate, and updates were
only made for missing upstream artefacts or bugs.
2022-12-03 19:49:00 +00:00
hash = "sha256-c5S6fycq5yKnTz2Wnc9Zm8TvCTvDkgOHSKSQ8XJKUV0=";
2020-09-27 07:33:46 +00:00
extension = "tar.bz2";
2017-06-10 10:18:10 +00:00
};
});
};
};
}
```
2022-07-20 06:45:47 +00:00
### How to override a Python package for all Python versions using extensions? {#how-to-override-a-python-package-for-all-python-versions-using-extensions}
The following overlay overrides the call to `buildPythonPackage` for the
`foo` package for all interpreters by appending a Python extension to the
`pythonPackagesExtensions` list of extensions.
```nix
final: prev: {
pythonPackagesExtensions = prev.pythonPackagesExtensions ++ [
(
python-final: python-prev: {
foo = python-prev.foo.overridePythonAttrs (oldAttrs: {
...
});
}
)
];
}
```
2021-06-05 19:22:45 +00:00
### How to use Intel’ s MKL with numpy and scipy? {#how-to-use-intels-mkl-with-numpy-and-scipy}
2018-10-18 19:00:48 +00:00
doc: Rewrite python onboarding tutorials in manual
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
2020-05-09 23:11:09 +00:00
MKL can be configured using an overlay. See the section "[Using overlays to
configure alternatives](#sec-overlays-alternatives-blas-lapack)".
2018-10-23 21:33:49 +00:00
2021-06-05 19:22:45 +00:00
### What inputs do `setup_requires`, `install_requires` and `tests_require` map to? {#what-inputs-do-setup_requires-install_requires-and-tests_require-map-to}
2019-01-05 09:26:57 +00:00
In a `setup.py` or `setup.cfg` it is common to declare dependencies:
* `setup_requires` corresponds to `nativeBuildInputs`
* `install_requires` corresponds to `propagatedBuildInputs`
* `tests_require` corresponds to `checkInputs`
2021-06-05 19:22:45 +00:00
## Contributing {#contributing}
2016-02-21 19:13:44 +00:00
2021-06-05 19:22:45 +00:00
### Contributing guidelines {#contributing-guidelines}
2016-02-21 19:13:44 +00:00
2021-03-24 12:03:31 +00:00
The following rules are desired to be respected:
2016-02-21 19:13:44 +00:00
2020-02-09 16:23:11 +00:00
* Python libraries are called from `python-packages.nix` and packaged with
`buildPythonPackage` . The expression of a library should be in
2020-09-04 06:42:30 +00:00
`pkgs/development/python-modules/<name>/default.nix` .
2020-02-09 16:23:11 +00:00
* Python applications live outside of `python-packages.nix` and are packaged
with `buildPythonApplication` .
2017-02-22 12:38:02 +00:00
* Make sure libraries build for all Python interpreters.
2020-02-09 16:23:11 +00:00
* By default we enable tests. Make sure the tests are found and, in the case of
libraries, are passing for all interpreters. If certain tests fail they can be
disabled individually. Try to avoid disabling the tests altogether. In any
case, when you disable tests, leave a comment explaining why.
* Commit names of Python libraries should reflect that they are Python
libraries, so write for example `pythonPackages.numpy: 1.11 -> 1.12` .
2021-03-24 12:03:31 +00:00
* Attribute names in `python-packages.nix` as well as `pname` s should match the
library's name on PyPI, but be normalized according to [PEP
0503](https://www.python.org/dev/peps/pep-0503/#normalized-names). This means
that characters should be converted to lowercase and `.` and `_` should be
replaced by a single `-` (foo-bar-baz instead of Foo__Bar.baz).
If necessary, `pname` has to be given a different value within `fetchPypi` .
2022-09-22 11:28:11 +00:00
* Packages from sources such as GitHub and GitLab that do not exist on PyPI
should not use a name that is already used on PyPI. When possible, they should
use the package repository name prefixed with the owner (e.g. organization) name
and using a `-` as delimiter.
2021-03-24 12:03:31 +00:00
* Attribute names in `python-packages.nix` should be sorted alphanumerically to
avoid merge conflicts and ease locating attributes.
2021-06-18 23:14:53 +00:00
## Package set maintenance
The whole Python package set has a lot of packages that do not see regular
updates, because they either are a very fragile component in the Python
ecosystem, like for example the `hypothesis` package, or packages that have
no maintainer, so maintenance falls back to the package set maintainers.
### Updating packages in bulk
There is a tool to update alot of python libraries in bulk, it exists at
`maintainers/scripts/update-python-libraries` with this repository.
It can quickly update minor or major versions for all packages selected
and create update commits, and supports the `fetchPypi` , `fetchurl` and
`fetchFromGitHub` fetchers. When updating lots of packages that are
hosted on GitHub, exporting a `GITHUB_API_TOKEN` is highly recommended.
Updating packages in bulk leads to lots of breakages, which is why a
stabilization period on the `python-unstable` branch is required.
Once the branch is sufficiently stable it should normally be merged
into the `staging` branch.
An exemplary call to update all python libraries between minor versions
would be:
```ShellSession
$ maintainers/scripts/update-python-libraries --target minor --commit --use-pkgs-prefix pkgs/development/python-modules/**/default.nix
```
2021-12-09 20:20:06 +00:00
## CPython Update Schedule
With [PEP 602 ](https://www.python.org/dev/peps/pep-0602/ ), CPython now
follows a yearly release cadence. In nixpkgs, all supported interpreters
are made available, but only the most recent two
interpreters package sets are built; this is a compromise between being
the latest interpreter, and what the majority of the Python packages support.
New CPython interpreters are released in October. Generally, it takes some
time for the majority of active Python projects to support the latest stable
interpreter. To help ease the migration for Nixpkgs users
between Python interpreters the schedule below will be used:
| When | Event |
| --- | --- |
| After YY.11 Release | Bump CPython package set window. The latest and previous latest stable should now be built. |
| After YY.05 Release | Bump default CPython interpreter to latest stable. |
In practice, this means that the Python community will have had a stable interpreter
for ~2 months before attempting to update the package set. And this will
allow for ~7 months for Python applications to support the latest interpreter.