Merge pull request #177913 from Yarny0/clickshare

{nixos/,}clickshare-csc1: remove (qt4)

nixos/doc/manual/from_md/release-notes/rl-2211.section.xml

@@ -138,6 +138,19 @@
           <literal>(with foo; isPower &amp;&amp; is32bit &amp;&amp; isBigEndian)</literal>.
         </para>
       </listitem>
+      <listitem>
+        <para>
+          The Barco ClickShare driver/client package
+          <literal>pkgs.clickshare-csc1</literal> and the option
+          <literal>programs.clickshare-csc1.enable</literal> have been
+          removed, as it requires <literal>qt4</literal>, which reached
+          its end-of-life 2015 and will no longer be supported by
+          nixpkgs.
+          <link xlink:href="https://www.barco.com/de/support/knowledge-base/4380-can-i-use-linux-os-with-clickshare-base-units">According
+          to Barco</link> many of their base unit models can be used
+          with Google Chrome and the Google Cast extension.
+        </para>
+      </listitem>
       <listitem>
         <para>
           PHP 7.4 is no longer supported due to upstream not supporting

nixos/doc/manual/release-notes/rl-2211.section.md

@@ -53,6 +53,10 @@ In addition to numerous new and upgraded packages, this release has the followin
 
 - The `isPowerPC` predicate, found on `platform` attrsets (`hostPlatform`, `buildPlatform`, `targetPlatform`, etc) has been removed in order to reduce confusion.  The predicate was was defined such that it matches only the 32-bit big-endian members of the POWER/PowerPC family, despite having a name which would imply a broader set of systems.  If you were using this predicate, you can replace `foo.isPowerPC` with `(with foo; isPower && is32bit && isBigEndian)`.
 
+- The Barco ClickShare driver/client package `pkgs.clickshare-csc1` and the option `programs.clickshare-csc1.enable` have been removed,
+  as it requires `qt4`, which reached its end-of-life 2015 and will no longer be supported by nixpkgs.
+  [According to Barco](https://www.barco.com/de/support/knowledge-base/4380-can-i-use-linux-os-with-clickshare-base-units) many of their base unit models can be used with Google Chrome and the Google Cast extension.
+
 - PHP 7.4 is no longer supported due to upstream not supporting this
   version for the entire lifecycle of the 22.11 release.
 

nixos/modules/module-list.nix

@@ -141,7 +141,6 @@
   ./programs/cdemu.nix
   ./programs/cfs-zen-tweaks.nix
   ./programs/chromium.nix
-  ./programs/clickshare.nix
   ./programs/cnping.nix
   ./programs/command-not-found/command-not-found.nix
   ./programs/criu.nix

nixos/modules/programs/clickshare.nix

@@ -1,21 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-{
-
-  options.programs.clickshare-csc1.enable =
-    lib.options.mkEnableOption ''
-      Barco ClickShare CSC-1 driver/client.
-      This allows users in the <literal>clickshare</literal>
-      group to access and use a ClickShare USB dongle
-      that is connected to the machine
-    '';
-
-  config = lib.modules.mkIf config.programs.clickshare-csc1.enable {
-    environment.systemPackages = [ pkgs.clickshare-csc1 ];
-    services.udev.packages = [ pkgs.clickshare-csc1 ];
-    users.groups.clickshare = {};
-  };
-
-  meta.maintainers = [ lib.maintainers.yarny ];
-
-}

pkgs/applications/video/clickshare-csc1/default.nix

@@ -1,122 +0,0 @@
-{ lib
-, stdenv
-, fetchurl
-, alsa-lib
-, autoPatchelfHook
-, binutils-unwrapped
-, libav_0_8
-, libnotify
-, libresample
-, libusb1
-, qt4
-, rpmextract
-, unzip
-, xorg
-, usersGroup ? "clickshare"  # for udev access rules
-}:
-
-
-# This fetches the latest firmware version that
-# contains a linux-compatible client binary.
-# Barco no longer supports linux, so updates are unlikely:
-# https://www.barco.com/de/support/clickshare-csc-1/knowledge-base/KB1191
-
-
-stdenv.mkDerivation rec {
-  pname = "clickshare-csc1";
-  version = "01.07.00.033";
-  src = fetchurl {
-    name = "clickshare-csc1-${version}.zip";
-    url = "https://www.barco.com/services/website/de/TdeFiles/Download?FileNumber=R33050020&TdeType=3&MajorVersion=01&MinorVersion=07&PatchVersion=00&BuildVersion=033";
-    sha256 = "0h4jqidqvk4xkaky5bizi7ilz4qzl2mh68401j21y3djnzx09br3";
-  };
-
-  nativeBuildInputs = [
-    autoPatchelfHook
-    binutils-unwrapped
-    rpmextract
-    unzip
-  ];
-  buildInputs = [
-    alsa-lib
-    libav_0_8
-    libnotify
-    libresample
-    libusb1
-    qt4
-    xorg.libX11
-    xorg.libXdamage
-    xorg.libXfixes
-    xorg.libXinerama
-    xorg.libXtst
-  ];
-  sourceRoot = ".";
-
-  # The source consists of nested archives.
-  # We extract them archive by archive.
-  # If the filename contains version numbers,
-  # we use a wildcard and check that there
-  # is actually only one file matching.
-  postUnpack =
-    let
-      rpmArch =
-        if stdenv.hostPlatform.isx86_32 then "i386" else
-        if stdenv.hostPlatform.isx86_64 then "x86_64" else
-        throw "unsupported system: ${stdenv.hostPlatform.system}";
-    in
-      ''
-        ls clickshare_baseunit_*.*_all.signed_release.ipk | wc --lines | xargs test 1 =
-        tar --verbose --extract --one-top-level=dir1 < clickshare_baseunit_*.*_all.signed_release.ipk
-        mkdir dir2
-        ( cd dir2 ; ar xv ../dir1/firmware.ipk )
-        tar --verbose --gzip --extract --one-top-level=dir3 --exclude='dev/*' < dir2/data.tar.gz
-        ls dir3/clickshare/clickshare-*-*.${rpmArch}.rpm | wc --lines | xargs test 1 =
-        mkdir dir4
-        cd dir4
-        rpmextract ../dir3/clickshare/clickshare-*-*.${rpmArch}.rpm
-      '';
-
-  installPhase = ''
-    runHook preInstall
-    mkdir --verbose --parents $out
-    mv --verbose --target-directory=. usr/*
-    rmdir --verbose usr
-    cp --verbose --recursive --target-directory=$out *
-    runHook postInstall
-  '';
-
-  # Default udev rule restricts access to the
-  # clickshare USB dongle to the `wheel` group.
-  # We replace it with the group
-  # stated in the package arguments.
-  # Also, we patch executable and icon paths in .desktop files.
-  preFixup = ''
-    substituteInPlace \
-        $out/lib/udev/rules.d/99-clickshare.rules \
-        --replace wheel ${usersGroup}
-    substituteInPlace \
-        $out/share/applications/clickshare.desktop \
-        --replace Exec= Exec=$out/bin/ \
-        --replace =/usr =$out
-    substituteInPlace \
-        $out/etc/xdg/autostart/clickshare-launcher.desktop \
-        --replace =/usr =$out
-  '';
-
-  meta = {
-    homepage = "https://www.barco.com/de/support/clickshare-csc-1/drivers";
-    downloadPage = "https://www.barco.com/de/Support/software/R33050020";
-    platforms = [ "i686-linux" "x86_64-linux" ];
-    license = lib.licenses.unfree;
-    maintainers = [ lib.maintainers.yarny ];
-    description = "Linux driver/client for Barco ClickShare CSC-1";
-    longDescription = ''
-      Barco ClickShare is a wireless presentation system
-      where a USB dongle transmits to a base station
-      that is connected with a beamer.
-      The USB dongle requires proprietary software that
-      captures the screen and sends it to the dongle.
-      This package provides the necessary software for Linux.
-    '';
-  };
-}

pkgs/top-level/aliases.nix

@@ -177,6 +177,7 @@ mapAliases ({
   cipherscan = throw "cipherscan was removed from nixpkgs, as it was unmaintained"; # added 2021-12-11
   citra = citra-nightly; # added 2022-05-17
   ckb = throw "'ckb' has been renamed to/replaced by 'ckb-next'"; # Converted to throw 2022-02-22
+  clickshare-csc1 = throw "'clickshare-csc1' has been removed as it requires qt4 which is being removed"; # Added 2022-06-16
   inherit (libsForQt5.mauiPackages) clip; # added 2022-05-17
   cpp-ipfs-api = cpp-ipfs-http-client; # Project has been renamed. Added 2022-05-15
   creddump = throw "creddump has been removed from nixpkgs as the upstream has abandoned the project"; # Added 2022-01-01

pkgs/top-level/all-packages.nix

@@ -25764,8 +25764,6 @@ with pkgs;
     inherit (xorg) libSM;
   };
 
-  clickshare-csc1 = callPackage ../applications/video/clickshare-csc1 { };
-
   cligh = python3Packages.callPackage ../development/tools/github/cligh {};
 
   clight = callPackage ../applications/misc/clight { };