Relative paths are interpreted relative to the working directory, which
is currently unset and thus defaults to `/`. However we want to change
the working directory in a future release such that relative paths are
interpreted relative to `/var/lib/syncthing`.
Upon testing the change itself I realized that it doesn't build properly
because
* the `pname` of a php extension is `php-<name>`, not `<name>`.
* calling the extension `openssl-legacy` resulted in PHP trying to compile
`ext/openssl-legacy` which broke since it doesn't exist:
source root is php-8.1.12
setting SOURCE_DATE_EPOCH to timestamp 1666719000 of file php-8.1.12/win32/wsyslog.c
patching sources
cdToExtensionRootPhase
/nix/store/48mnkga4kh84xyiqwzx8v7iv090i7z66-stdenv-linux/setup: line 1399: cd: ext/openssl-legacy: No such file or directory
I didn't encounter that one before because I was mostly interested in
having a sane behavior for everyone not using this "feature" and the
documentation around this. My findings about the behavior with turning
openssl1.1 on/off are still valid because I tested this on `master` with
manually replacing `openssl` by `openssl_1_1` in `php-packages.nix`.
To work around the issue I had to slightly modify the extension
build-system for PHP:
* The attribute `extensionName` is now relevant to determine the output
paths (e.g. `lib/openssl.so`). This is not a behavioral change for
existing extensions because then `extensionName==name`.
However when specifying `extName` in `php-packages.nix` this value is
overridden and it is made sure that the extension called `extName` NOT
`name` (i.e. `openssl` vs `openssl-legacy`) is built and installed.
The `name` still has to be kept to keep the legacy openssl available
as `php.extensions.openssl-legacy`.
Additionally I implemented a small VM test to check the behavior with
server-side encryption:
* For `stateVersion` below 22.11, OpenSSL 1.1 is used (in `basic.nix`
it's checked that OpenSSL 3 is used). With that the "default"
behavior of the module is checked.
* It is ensured that the PHP interpreter for Nextcloud's php-fpm
actually loads the correct openssl extension.
* It is tested that (encrypted) files remain usable when (temporarily)
installing OpenSSL3 (of course then they're not decryptable, but on a
rollback that should still be possible).
Finally, a few more documentation changes:
* I also mentioned the issue in `nextcloud.xml` to make sure the issue
is at least mentioned in the manual section about Nextcloud. Not too
much detail here, but the relevant option `enableBrokenCiphersForSSE`
is referenced.
* I fixed a few minor wording issues to also give the full context
(we're talking about Nextcloud; we're talking about the PHP extension
**only**; please check if you really need this even though it's
enabled by default).
This is because I felt that sometimes it might be hard to understand
what's going on when e.g. an eval-warning appears without telling where
exactly it comes from.
* s/NextCloud/Nextcloud/g
* `enableBrokenCiphersForSSE` should be enabled by default for any NixOS
installation from before 22.11 to make sure existing installations
don't run into the issue. Not the other way round.
* Update release notes to reflect on that.
* Improve wording of the warning a bit: explain which option to change
to get rid of it.
* Ensure that basic tests w/o `enableBrokenCiphersForSSE` run with
OpenSSL 3.
Allow building other than Legacy-BIOS-only Proxmox images.
Default is unchanged.
To build UEFI proxmox image use:
proxmox.qemuConf.bios = "ovmf";
(default is "seabios")
To build image bootable using both "seabios" and "ovmf" use:
partitionTableType = "hybrid";
BIOS can be switched in Proxmox between "seabios" and "ovmf" and VM still boots.
(GRUB2-only, systemd-boot does not boot under "seabios")
To build systemd-boot UEFI image:
proxmox.qemuConf.bios = "ovmf";
boot.loader.systemd-boot.enable = true;
Support will be dropped on 01 Jan 2023[1]. Normally we'd keep it around
until then, but considering that it's an LTS kernel it may be better to
do it before 22.11 to make sure there are no unpleasant surprises.
Closes#199933
[1] https://endoflife.date/linux
Percona Server for MySQL 5.6 is no more maintained due to the EOL of MySQL 5.6.
See https://www.percona.com/downloads/Percona-Server-5.6/LATEST/.
A bit hard to list all the potential security issues affecting it but CVE-2021-27928
should be one of them.
- Update download URLs
- Replace "USB stick"/"USB Drive" with "USB flash drive" as that seem more correct
https://en.wikipedia.org/wiki/USB_flash_drivehttps://elementary.io/docs/installation#choose-operating-system
- Don't mention CD as easiest option anymore,
as all modern systems should be able to boot from USB,
but many don't have a CD drive. Burning CDs is also usually wasteful as you
can't burn them again.
- Remove link to NixOS Wiki (Making_the_installation_media) as it is not needed
- Add Etcher and USBImager as graphical tools to create install drive
- Make dd command consistent and use block size of 4 MB for faster flashing
- More consistent text
- Add instructions for "Booting from the install medium"
Inspired by 9a91b0f495/docs/installation.md (booting-from-the-install-drive-booting-from-the-installation-medium-clear-float-2)
- Add instructions for "Graphical Installation"
- Restructure headings and anchors for "Manual Installation"
- Adding legacy anchors for "Manual Installation" to not break links
Co-authored-by: j-k <dev@j-k.io>
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
Co-authored-by: Robert Schütz <github@dotlambda.de>
Co-authored-by: Jörg Thalheim <Mic92@users.noreply.github.com>
Co-authored-by: Thiago Kenji Okada <thiagokokada@gmail.com>
This will add `passthru.schema_version` to be used as default value for
the adguardhome module.
It will also update the `update.sh` to keep the `schema_version` in sync
with the version by inspecting the sourcecode.
This might break existing configs, if they use deprecated values that don't
appear in newer schema_versions and schema_version wasn't set explicitly.
Explicit declarations of schema_version always have higher priority.
This also removes the `host` and `config` settings in favour of using the
appropriate `settings`.
Fixes#173938
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
- Previously PolyMC's removal was counted as a release highlight
- It probably shouldn't be, as it's more a notable change rather than a
highlight
- Thanks @Ma27 for noticing this
This commit refactors `services.grafana.provision.datasources` towards
the RFC42 style. To preserve backwards compatibility, we have to jump
through a ton of hoops, introducing esoteric type signatures and bizarre
structs. The Grafana module definition should hopefully become a lot
cleaner after a release cycle or two once the old configuration style is
completely deprecated.
This commit refactors `services.grafana.provision.dashboards` towards
the RFC42 style. To preserve backwards compatibility, we have to jump
through a ton of hoops, introducing esoteric type signatures and bizarre
structs. The Grafana module definition should hopefully become a lot
cleaner after a release cycle or two once the old configuration style is
completely deprecated.
- Previously PolyMC was the suggested replacement for MultiMC
- As PolyMC is marked as insecure and prismlauncher is a replacement,
this commit suggests using it instead
The actual p4 command is open-source software released under the
2-clause BSD license, so we can build it here (for pretty much every
architecture we support!) and include it in the cache.
This change removes the server-side commands from this package, but they
are now available as part of a separate p4d package instead. (The server
package remains unfree.)
As an added bonus, we can also include the libraries and headers for the
C/C++ API, which will allow us to package any software that uses
Perforce as a library in the future.
This binary was provided by the `cosign` package until now but it is in
the process of being removed, see https://github.com/sigstore/cosign/pull/2019
Since it might be removed during the 22.11 cycle we drop it
preventively. This will make possible security backports easier if we
need them.
Deprecate haskell.lib{,.compose}.generateOptparseApplicativeCompletion*
in favor of the newly added
haskell.packages.*.generateOptparseApplicativeCompletions (plural!)
which takes into account whether we are cross-compiling or not. If we
are, generating completions is disabled, since we can't execute software
built for a different platform.
The move is necessary, so we can receive the /same/ stdenv as the
package we are overriding in order to accurately check whether we can
execute produced binaries.
Resolves#174040.
Resolves#49648.
This caused too many downstream projects to break, so we are reverting
this change for now, until further transition fixes are in place.
See discussion in https://github.com/NixOS/nixpkgs/pull/191171
This reverts part of 6762de9a28
Optional functionality of AusweisApp2 requires an UDP port to be opened.
The module allows for convenient configuration and serves as documentation.
See also https://github.com/NixOS/nixpkgs/issues/136269
deprecate literalDocBook by adding a warning (that will not fire yet) to
its uses and other docbook literal strings by adding optional warning
message to mergeJSON.
Because of long standing bugs and stability issues & an
uncollaborative upstream there has been talk on the emacs-devel
mailing list to switch the default toolkit to
Lucid (https://lists.gnu.org/archive/html/emacs-devel/2022-08/msg00752.html).
The GTK build also has issues with Xinput2, something that both we and
upstream want to enable by default in Emacs 29.
This situation has prompted me to use both Lucid an no-toolkit (pure X11) Emacs
as a daily driver in recent weeks to evaluate what the
advantages/drawbacks are and I have concluded that, at least for me,
switching the toolkit to Lucid is strictly an upgrade.
It has resulted in better stability (there are far fewer tiny UX
issues that are hard to understand/identify) & a snappier UI.
On top of that the closure size is reduced by ~10%.
In the pure X11 build I noticed some unsharpness around fonts so this
is not a good default choice.
As with everything there is a cost, and that is uglier (I think most
would agree but of course this is subjective) menu bars for
those that use them and no GTK scroll bars.
For anyone who still wants to use GTK they could of course still
choose to do so via the new `emacs-gtk` attribute but I think this
is a bad default.
A note to Wayland users:
This does not affect Wayland compatibility in any way since that will
already need a PGTK build variant in the future.
- Replace misleading docs.
- Add new assertions to let configurations make more sense.
- Add clusterInit flag.
- Add some more docs about HA and non-HA modes setup.
- Improve multi-node tests for HA mode.
Fix https://github.com/NixOS/nixpkgs/issues/182085
This option is based on a recommendation from a page last updated in
2014 (see https://www.freedesktop.org/wiki/Software/Glamor/), and it
is not necessary anymore.
Also, it did the wrong thing: it forced DRI2, but Glamor should also
work with DRI3, that is a better option most of the time. So let's
remove this option, folks that still want to force this manually can do
so in other ways.
Enable keter module
Keter is an apploader which:
1. has the old app running on a port.
2. loads a new one, and wait for that to complete
3. switches the old with the new one once the new one finished loading.
It supports more functionality but this use case
is the primary one being used by supercede.
Adds keter as a module to nixos.
Currently keter is unusable with nix,
because it relies on bundeling of a tar and uploading that to a specific folder.
These expressions automate these devops tasks,
with especially nixops in mind.
This will work with versions above 1.8
The test seems to work.
This uses a new version of keter which has good
support for status code on error pages.
We're using this config at production at supercede
so it should be fine.
Squash log:
==========
mention keter in changelog
Update generated release notes
Always restart keter on failure
This is a little bit of extra stability in case keter crashes.
Which can happen under extreme conditions (DoS attacks).
Update nixos/doc/manual/release-notes/rl-2205.section.md
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/module-list.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Remove sanitization
don't put domain in as a string
Update nixos/tests/keter.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
add jappie as module maintainer
Use type path instead of two seperate options
Fix generated docs
added test machinery to figure out why it's failing
Fix the test, use console output
run nixpkgs-fmt on all modules
Inline config file.
This get's rid of a lot of inderection as well.
Run nix format
remove comment
simplify executable for test
delete config file
add config for keter root
Remove after redis clause
set keter root by default to /var/lib/keter
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
fix nit
add newlines
add default text and move description in a long description
Delete rather obvious comment
fix release db thing
remove longDescription and put it in a comment instead
change description of mkEnalbeOption
explain what keter does by using the hackage synopsis
set domain to keterDomain and same for executable
move comment to where it's happening
fix type error
add formatting better comment
try add seperate user for keter
Revert "try add seperate user for keter"
This reverts commit d3522d36c96117335bfa072e6f453406c244e940.
Doing this breaks the setup
set default to avoid needing cap_net_bind_service
remove weird comment
use example fields
eleborated on process leakage
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
run nixpkgs-fmt
update docs
Fix formatting, set keter package by default
format our little nixexpr
replace '' -> " where possible
drop indent for multiline string
make description much shorter
regen docs database