Prior to this patch:
$ nix-instantiate --eval -E '
> with import ./. {
> localSystem.config = "aarch64-unknown-linux-musl";
> };
> (nixos {}).config.nixpkgs.localSystem.config
> '
"aarch64-unknown-linux-gnu"
Because only the system triple was being passed through, the Musl part
of the system specification was lost. This patch fixes various
occurrences of NixOS evaluation when a Nixpkgs evaluation is already
available, to pass through the full elaborated system attribute set,
to avoid this loss of precision.
Since, 4ddc78818e systemd-boot-builder
is broken in two ways:
* if no systemd-boot is currently installed *and* the NIXOS_INSTALL_BOOTLOADER
env variable is not set, it will try to run "bootctl update", which will fail
* if the currently installed systemd-boot version is newer than the version
we're about to install, it will also try to run "bootctl update", which will fail
This patch changes the behaviour,
* for the first case to still fail, but not even bother to try running
"bootctl update" and instead erroring out with an exception
* for the second case to leave the newer version in place, restoring
the pre - 4ddc78818e behaviour
To do the proper version check a new "should_update" helper function was introduced,
mimicing the compare_product C function from bootctl. If the following systemd
issue gets resolved, we would have a nice way to get rid of this function:
> https://github.com/systemd/systemd/issues/23450
This change allows to again switch to a different NixOS configuration which contains
an older systemd-boot.
Co-authored-by: Martin Weinelt <mweinelt@users.noreply.github.com>
- initialSystem was keeping track of the evaluating system
- it had been used by `nesting.children`
- since, 20.09, `nesting.children` has been replaced with named
specializations
It appears that this option was left over and not cleand up properly.
`extra-utils` composes the set of programs and libraries needed by
1. copying over all programs
2. copying over all libraries any program directly links against
3. set the runtime path for every program to the library directory
It seems that this approach misses the case where a library itself links
against another library. That is to say, `extra-utils` assumes that
either only progams link against libraries or that every library linked
to by a library is already linked to by a program.
`mount.zfs` linking against `libcrypto`, in turn linking against `libdl`
shows how the current approach falls short:
```
$ objdump -p $(which mount.zfs) | grep NEEDED | grep -e libdl -e libcrypto
NEEDED libcrypto.so.1.1
$ ldd (which mount.zfs) | grep libdl
libdl.so.2 => /nix/store/ybkkrhdwdj227kr20vk8qnzqnmj7a06x-glibc-2.34-115/lib/libdl.so.2 (0x00007f9967a9a000
```
Using `mount.zfs` directly in stage 1 init still works since
`LD_LIBRARY_PATH` overrides this (as intended).
util-linux's `mount` however executes `mount.zfs` with LD_LIBRARY_PATH
removed from its environment as can be seen with strace(1) in an
interactive stage 1 init shell (`boot.shell_on_fail` kernel parameter):
```
# env -i LD_LIBRARY_PATH=$LD_LIBRARY_PATH $(which strace) -ff -e trace=/exec -v -qqq $(which mount) /mnt-root
execve("/nix/store/3gqbb3swgiy749fxd5a4k6kirkr2jr9n-extra-utils/bin/mount", ["/nix/store/3gqbb3swgiy749fxd5a4k"..., "/mnt-root"], ["LD_LIBRARY_PATH=/nix/store/3gqbb"...]) = 0
[pid 1026] execve("/sbin/mount.zfs", ["/sbin/mount.zfs", "<redacted>", "/mnt-root", "-o", "rw,zfsutil"], []) = 0
/sbin/mount.zfs: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=1026, si_uid=0, si_status=127, si_utime=0, si_stime=0} ---
```
env(1) is used for clarity (hence subshells for absoloute paths).
While `mount` uses the right library path, `mount.zfs` is stripped of
it, so ld.so(8) fails resolve `libdl` (as required by `libcrypto`).
To fix this and not rely on `LD_LIBRARY_PATH` to be set, fix the library
path inside libraries as well.
This finally mounts all ZFS filesystems using `zfsutil` with correct and
intended mount options.
At least pkgs/os-specific/linux/util-linux/default.nix uses
```
"--enable-fs-paths-default=/run/wrappers/bin:/run/current-system/sw/bin:/sbin"
```
which does not cover stage 1 init's PATH as all executables are put
under /bin/.
Fix util-linux's `mount` usage by symlinking /sbin to it.
Consider ZFS filesystems meant to be mounted with zfs.mount(8), e.g.
```
config.fileSystems."/media".options = [ "zfsutil" ];
config.fileSystems."/nix".options = [ "zfsutil" ];
```
`zfsutil` uses dataset properties as mount options such that zfsprops(7)
do not have to be duplicated in fstab(5) entries or manual mount(8)
invocations.
Given the example configuation above, /media is correctly mounted with
`setuid=off` translated into `nosuid`:
```
$ zfs get -Ho value setuid /media
off
$ findmnt -t zfs -no options /media
rw,nosuid,nodev,noexec,noatime,xattr,posixacl
```
/nix however was mounted with default mount(8) options:
```
$ zfs get -Ho value setuid /nix
off
$ findmnt -t zfs -no options /nix
rw,relatime,xattr,noacl
```
This holds true for all other ZFS properties/mount options, including
`exec/[no]exec`, `devices/[no]dev`, `atime/[no]atime`, etc.
/nix is mounted using BusyBox's `mount` during stage 1 init while /media
is mounted later using proper systemd and/or util-linux's `mount`.
Tracing stage 1 init showed that BusyBox never tried to execute
mount.zfs(8) as intended by `zfsutil`.
Replacing it with util-linux's `mount` and adding the mount helper
showed attempts to execute mount.zfs(8).
Ensure ZFS filesystems are mounted with correct options iff `zfsutil` is
used.
Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
* origin/staging-next: (62 commits)
Re-Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
openldap: fix cross-compilation
makeBinaryWrapper: fix codesign on aarch64-darwin
python3Packages.ldap: fix linking with openldap 2.5+
Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
wine: enable parallel build again
pkgsi686Linux.gdb: fix formatting for 32-bit systems
gtk4: Fix incorrect merge
nixos/openldap: use upstream unit defaults
openldap: update maintainers
openldap: 2.4.58 -> 2.6.2
Revert "Add mingwW64-llvm cross-system."
lua: fix on darwin by using makeBinaryWrapper (#172749)
python310Packages.python-mimeparse: execute tests
pandas: fix darwin build
gtk3: 3.24.33 -> 3.24.33-2022-03-11
gtk4: patch fixing g-c-c crashes
e2fsprogs: patch for CVE-2022-1304
firefox-unwrapped: fix cross compilation
rustc: expose correct llvmPackages for cross compile
...
Since the list only gates the platforms the nixpkgs flake exposes
packages to build on, the `hydra` label made little sense. It was also
only used for this purpose, so the `tier*` attributes were largely
unnecessary.
To reflect the intention more accurately, we expose
`lib.systems.flakeExposed` and use it to gate flake.nix's system list.
Otherwise, it wouldn't get restarted when a new system configuration
was activatad, so the Postfix configuration wouldn't be updated.
Fixes: fb2fa1b50f ("nixos/postfix: pull setup into its own unit")
There is a comment above the invocation of 'nextcloud-occ app:enable', stating
that the script should not fail if any of the apps cannot be enabled, but there
is nothing in place to suppress errors. The app:enable command already
continues installing the remaining apps when one fails to install, and we do not
want to suppress errors in the setup script, so this just removes the comment
about not failing.
* Removed unused `.package`-option.
* Added explicit postgresql support.
* Create a new meta-package for mailman to make sure each component has
the **same** python and packages can be downgraded if needed (e.g.
psycopg2 or sqlalchemy) without interfering with `pythonPackages` in any way.
* Document why certain python overrides are needed.
Closes#170035Closes#158424
OpenLDAP since version 2.5.4¹ supports sd_notify, so we should make use
of it.
Also updates the unit description and documentation with the values
upstream provides.
Starts slapd only after reaching `network-online.target`, which ensures
binding to specific ip addresses is possible, since `network.target`
only guarantees interfaces exist, but not that addressing is finished.
[1] https://bugs.openldap.org/show_bug.cgi?id=8707
switchboard-plug-power is providing support for this since 2.7.0.
Note that we don't handle the conflict with tlp because we have
no way of knowing which way a user wants to resolve the conflict.
A git command was failing in the test with
error: unable to get random bytes for temporary file: Operation not permitted
error: unable to create temporary file: Operation not permitted
error: .Radicale.lock: failed to insert into database
error: unable to index file '.Radicale.lock'
Recent `wrapGAppsHook` change stops `adwaita-icon-theme` from being added to `XDG_DATA_DIRS`:
b1e73fa2e0
Since `display-manager.service` does not have `/run/current-system/sw/share` in `XDG_DATA_DIRS`, it does not pick up the globally installed icon theme either, preventing icons from showing.
Let’s make Adwaita available to fix that for now.
Fixes: https://github.com/NixOS/nixpkgs/issues/171692