The resulting image can be copied to a SD card with `dd` and is directly
bootable by a suitably configured U-Boot. Though depending on the board, some
extra steps are required for copying U-Boot itself to the SD card.
Inside the image is a partition table, with a FAT32 /boot and a normal
writable EXT4 rootfs. It's possible to directly reuse the SD image's
partition layout and "install" NixOS on the same SD card by replacing
the default configuration.nix and nixos-rebuild, and actually is the
preferred way to use these images. To assist in this installation
method, the boot scripts on the image automatically resize the rootfs
partition to fit the SD card on the first boot.
The SD images come in two flavors; one for the ARMv6 Raspberry Pi,
and one multiplatform image for all the boards supported by the
mainline kernel's multi_v7_defconfig config target. At the moment, these
have been tested on:
- Raspberry Pi Model B (512MB model)
- NVIDIA Jetson TK1
- Linksprite pcDuino3 Nano
To build, run:
nix-build '<nixpkgs/nixos>' -A config.system.build.sdImage \
-I nixos-config='<nixpkgs/nixos/modules/installer/cd-dvd/sd-image-armv7l-multiplatform.nix>'
Only include the English language for the VM tests, because we most
likely won't need other languages. At least for now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
By default this is now enabled, and it has to be explicitely enabled
using "enableOCR = true". If it is set to false, any usage of
getScreenText or waitForText will fail with an error suggesting to pass
enableOCR.
This should get rid of the rather large dependency on tesseract which
we don't need for most tests.
Note, that I'm using system("type -P") here to check whether tesseract
is in PATH. I know it's a bashism but we already have other bashisms
within the test scripts and we also run it with bash, so IMHO it's not a
problem here.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
As promised in the previous commit, this can be used similarly to
$machine->waitForWindow, where you supply a regular expression and it's
retrying OCR until the regexp matches.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Basically, this creates a screenshot and throws tesseract at it to
recognize the characters from the screenshot. In order to produce a
result that is well enough, we're using lanczos scaling and scale the
image up to 400% of its original size.
This provides the base functionality for a new Machine method which will
be called waitForText. I originally had that idea long ago when writing
the VM tests for VirtualBox and Chromium, but thought it would be
disproportionate to the case.
The downside however is that VM tests now depend on tesseract, but given
the average runtime of our tests it really shouldn't have a too big
impact and it's only a runtime dependency after all.
Another issue is that the OCR process takes quite some time to finish,
but IMHO it's better (as in more deterministic) than to rely on sleep().
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This changes the bootloader for iso generation from Grub to
syslinux. In addition this adds USB booting support, so that
"dd" can be used to burn the generated ISO to USB thumbdrives
instead of needing applications like UnetBootin.
Ideally the module system could be configured pretty much completely by
the contents of the modules themselves, so add comments about avoiding
complicating it further and possibly removing now-redundant
configurability from the existing interface.
This is useful for adding extra functionality or defaults to _every_
nixos evaluation.
My use case is overriding behaviour for all nixos tests, for example
setting packageOverrides to newer versions and changing some default
dependencies/settings.
By making this accessible through an environment variable, this can now
be fully accomplished externally. No more need to fork
nixos/nixpkgs (which becomes a maintenance burden), just use the channel
instead and plug in via this envvar.
This changes the bootloader for iso generation from Grub to
syslinux. In addition this adds USB booting support, so that
"dd" can be used to burn the generated ISO to USB thumbdrives
instead of needing applications like UnetBootin.
The current way test reports get jquery,
src="//ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"
only works when getting reports over http:// or https://, not file://.
Change it so that it works for all protocols by using a local copy of
jquery.
This fixes the issue where locally created and browsed test reports
cannot be navigated properly; clicking the '+' symbol to expand
sub-sections doesn't work.
Now you can just say:
$ nix-build '<nixos/tests/login.nix>'
You can still get the driver script for interactive testing:
$ nix-build '<nixos/tests/login.nix>' -A driver
$ ./result/bin/nixos-test-driver