Add udev rules for the Teensy family of microcontrollers so that they can be flashed as non-root users.
40 lines
2 KiB
Plaintext
40 lines
2 KiB
Plaintext
# UDEV Rules for Teensy boards, http://www.pjrc.com/teensy/
|
|
#
|
|
# The latest version of this file may be found at:
|
|
# http://www.pjrc.com/teensy/00-teensy.rules
|
|
#
|
|
# This file must be placed at:
|
|
#
|
|
# /etc/udev/rules.d/00-teensy.rules (preferred location)
|
|
# or
|
|
# /lib/udev/rules.d/00-teensy.rules (req'd on some broken systems)
|
|
#
|
|
# To install, type this command in a terminal:
|
|
# sudo cp 00-teensy.rules /etc/udev/rules.d/00-teensy.rules
|
|
#
|
|
# After this file is installed, physically unplug and reconnect Teensy.
|
|
#
|
|
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789a]*", ENV{MTP_NO_PROBE}="1"
|
|
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666", RUN:="/bin/stty -F /dev/%k raw -echo"
|
|
KERNEL=="hidraw*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666"
|
|
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04*", MODE:="0666"
|
|
KERNEL=="hidraw*", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="013*", MODE:="0666"
|
|
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1fc9", ATTRS{idProduct}=="013*", MODE:="0666"
|
|
|
|
#
|
|
# If you share your linux system with other users, or just don't like the
|
|
# idea of write permission for everybody, you can replace MODE:="0666" with
|
|
# OWNER:="yourusername" to create the device owned by you, or with
|
|
# GROUP:="somegroupname" and mange access using standard unix groups.
|
|
#
|
|
# ModemManager tends to interfere with USB Serial devices like Teensy.
|
|
# Problems manifest as the Arduino Serial Monitor missing some incoming
|
|
# data, and "Unable to open /dev/ttyACM0 for reboot request" when
|
|
# uploading. If you experience these problems, disable or remove
|
|
# ModemManager from your system. If you must use a modem, perhaps
|
|
# try disabling the "MM_FILTER_RULE_TTY_ACM_INTERFACE" ModemManager
|
|
# rule. Changing ModemManager's filter policy from "strict" to "default"
|
|
# may also help. But if you don't use a modem, completely removing
|
|
# the troublesome ModemManager is the most effective solution.
|