diff --git a/.drone.yml b/.drone.yml index 2380509..f54bd8f 100644 --- a/.drone.yml +++ b/.drone.yml @@ -106,7 +106,6 @@ steps: - nix $$NIX_FLAGS flake check - nix $$NIX_FLAGS build ".#nixosConfigurations.PubSolarOS.config.system.build.toplevel" - nix $$NIX_FLAGS develop --command echo OK - - nix $$NIX_FLAGS develop --command bud --help --- kind: pipeline @@ -122,8 +121,8 @@ steps: commands: - | nix --print-build-logs --verbose \ - develop --command \ - bud build bootstrap bootstrapIso + build \ + '.#nixosConfigurations.bootstrap.config.system.build.bootstrapIso' - cp $(readlink -f result)/iso/*.iso /var/nix/iso-cache/ - name: "Publish ISO" @@ -158,6 +157,6 @@ volumes: --- kind: signature -hmac: bdbefb07b97dc8efc44d8eb36ee4d1bb89eec3b7255b49929e126e86a4b4a788 +hmac: da951ba8ede88996728acfb47846e01880eb0e3b91f66e47848d6c1cc727c5d9 ... diff --git a/doc/CONTRIBUTING.md b/doc/CONTRIBUTING.md index 86f5dd7..e3af7e2 100644 --- a/doc/CONTRIBUTING.md +++ b/doc/CONTRIBUTING.md @@ -1,18 +1,13 @@ -# Pull Requests - -## TL;DR; +# TL;DR; - **Target Branch**: `main` -- **Merge Policy**: [`bors`][bors] is always right (→ `bors try`) -- **Docs**: every changeset is expected to contain doc updates +- **Merge Policy**: green check: merge away. yellow circle: have patience. red x: try again. +- **Docs**: every change set is expected to contain doc updates - **Commit Msg**: be a poet! Comprehensive and explanatory commit messages should cover the motivation and use case in an easily understandable manner even when read after a few months. -- **Test Driven Development**: please default to test driven development where possible. +- **Test Driven Development**: please default to test driven development you can + make use of the `./examples` & `./e2e` and wire test up in the devshell. ### Within the Devshell (`nix develop`) - **Hooks**: please `git commit` within the devshell -- **Fail Early**: please run from within the devshell on your local machine: - - `nix flake check` - -[bors]: https://bors.tech - +- **Fail Early**: please run `check-all` from within the devshell on your local machine diff --git a/doc/SUMMARY.md b/doc/SUMMARY.md index 1d7bafe..09d2d62 100644 --- a/doc/SUMMARY.md +++ b/doc/SUMMARY.md @@ -3,8 +3,6 @@ - [Introduction](../README.md) - [Quick Start](./start/index.md) - [ISO](./start/iso.md) - - [Bootstrapping](./start/bootstrapping.md) - - [From NixOS](./start/from-nixos.md) - [Key Concepts](./concepts/index.md) - [Hosts](./concepts/hosts.md) - [Overrides](./concepts/overrides.md) @@ -18,11 +16,16 @@ - [Concerns]() - [Secrets](./secrets.md) - [Tests](./tests.md) -- [Helper Script – `bud`](./bud/index.md) - - [get](./bud/get.md) - [Integrations](./integrations/index.md) - [Cachix](./integrations/cachix.md) - [Deploy RS](./integrations/deploy.md) - [NvFetcher](./integrations/nvfetcher.md) - [Hercules CI](./integrations/hercules.md) +- [API Reference](./api-reference.md) + - [Channels](./api-reference-channels.md) + - [Home](./api-reference-home.md) + - [Devshell](./api-reference-devshell.md) + - [NixOS](./api-reference-nixos.md) +- [Library Reference]() - [Contributing](./CONTRIBUTING.md) + diff --git a/doc/api-reference-channels.md b/doc/api-reference-channels.md new file mode 100755 index 0000000..533e6e9 --- /dev/null +++ b/doc/api-reference-channels.md @@ -0,0 +1,91 @@ +# Channels API Container +Configure your channels that you can use throughout your configurations. + +> #### ⚠ Gotcha ⚠ +> Devshell & (non-host-specific) Home-Manager `pkgs` instances are rendered off the +> `nixos.hostDefaults.channelName` (default) channel. + + +## channels +nixpkgs channels to create + + +*_Type_*: +attribute set of submodules or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## channels.\.config +nixpkgs config for this channel + + +*_Type_*: +attribute set or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## channels.\.input +nixpkgs flake input to use for this channel + + +*_Type_*: +nix flake + + +*_Default_* +``` +"self.inputs." +``` + + + + +## channels.\.overlays +overlays to apply to this channel +these will get exported under the 'overlays' flake output +as \/\ and any overlay pulled from \ +will be filtered out + + +*_Type_*: +list of valid Nixpkgs overlay or path convertible to its or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## channels.\.patches +patches to apply to this channel + + +*_Type_*: +list of paths + + +*_Default_* +``` +[] +``` + + + + diff --git a/doc/api-reference-devshell.md b/doc/api-reference-devshell.md new file mode 100755 index 0000000..28f1808 --- /dev/null +++ b/doc/api-reference-devshell.md @@ -0,0 +1,72 @@ +# Devshell API Container +Configure your devshell module collections of your environment. + + +## devshell +Modules to include in your DevOS shell. the `modules` argument +will be exported under the `devshellModules` output + + +*_Type_*: +submodule or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## devshell.exportedModules +modules to include in all hosts and export to devshellModules output + + +*_Type_*: +list of valid module or path convertible to its or anything convertible to it + + +*_Default_* +``` +[] +``` + + + + +## devshell.externalModules +The `externalModules` option has been removed. +Any modules that should be exported should be defined with the `exportedModules` +option and all other modules should just go into the `modules` option. + + +*_Type_*: +list of valid modules or anything convertible to it + + +*_Default_* +``` +[] +``` + + + + +## devshell.modules +modules to include that won't be exported +meant importing modules from external flakes + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + diff --git a/doc/api-reference-home.md b/doc/api-reference-home.md new file mode 100755 index 0000000..0ab62f3 --- /dev/null +++ b/doc/api-reference-home.md @@ -0,0 +1,119 @@ +# Home-Manager API Container +Configure your home manager modules, profiles & suites. + + +## home +hosts, modules, suites, and profiles for home-manager + + +*_Type_*: +submodule or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## home.exportedModules +modules to include in all hosts and export to homeModules output + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## home.externalModules +The `externalModules` option has been removed. +Any modules that should be exported should be defined with the `exportedModules` +option and all other modules should just go into the `modules` option. + + +*_Type_*: +list of valid modules or anything convertible to it + + +*_Default_* +``` +[] +``` + + + + +## home.importables +Packages of paths to be passed to modules as `specialArgs`. + + +*_Type_*: +attribute set + + +*_Default_* +``` +{} +``` + + + + +## home.importables.suites +collections of profiles + + +*_Type_*: +null or attribute set of list of paths or anything convertible to its or path convertible to it + + +*_Default_* +``` +null +``` + + + + +## home.modules +modules to include that won't be exported +meant importing modules from external flakes + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## home.users +HM users that can be deployed portably without a host. + + +*_Type_*: +attribute set of HM user configs + + +*_Default_* +``` +{} +``` + + + + diff --git a/doc/api-reference-nixos.md b/doc/api-reference-nixos.md new file mode 100755 index 0000000..7428b16 --- /dev/null +++ b/doc/api-reference-nixos.md @@ -0,0 +1,234 @@ +# NixOS API Container +Configure your nixos modules, profiles & suites. + + +## nixos +hosts, modules, suites, and profiles for NixOS + + +*_Type_*: +submodule or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## nixos.hostDefaults +Defaults for all hosts. +the modules passed under hostDefaults will be exported +to the 'nixosModules' flake output. +They will also be added to all hosts. + + +*_Type_*: +submodule + + +*_Default_* +``` +{} +``` + + + + +## nixos.hostDefaults.channelName +Channel this host should follow + + +*_Type_*: +channel defined in `channels` + + + + + + +## nixos.hostDefaults.exportedModules +modules to include in all hosts and export to nixosModules output + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## nixos.hostDefaults.externalModules +The `externalModules` option has been removed. +Any modules that should be exported should be defined with the `exportedModules` +option and all other modules should just go into the `modules` option. + + +*_Type_*: +list of valid modules or anything convertible to it + + +*_Default_* +``` +[] +``` + + + + +## nixos.hostDefaults.modules +modules to include that won't be exported +meant importing modules from external flakes + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## nixos.hostDefaults.system +system for this host + + +*_Type_*: +null or system defined in `supportedSystems` + + +*_Default_* +``` +null +``` + + + + +## nixos.hosts +configurations to include in the nixosConfigurations output + + +*_Type_*: +attribute set of submodules + + +*_Default_* +``` +{} +``` + + + + +## nixos.hosts.\.channelName +Channel this host should follow + + +*_Type_*: +null or channel defined in `channels` + + +*_Default_* +``` +null +``` + + + + +## nixos.hosts.\.modules +modules to include + + +*_Type_*: +list of valid modules or anything convertible to it or path convertible to it + + +*_Default_* +``` +[] +``` + + + + +## nixos.hosts.\.system +system for this host + + +*_Type_*: +null or system defined in `supportedSystems` + + +*_Default_* +``` +null +``` + + + + +## nixos.hosts.\.tests +tests to run + + +*_Type_*: +list of valid NixOS test or path convertible to its or anything convertible to it + + +*_Default_* +``` +[] +``` + + +*_Example_* +``` +{"_type":"literalExpression","text":"[\n {\n name = \"testname1\";\n machine = { ... };\n testScript = ''\n # ...\n '';\n }\n ({ corutils, writers, ... }: {\n name = \"testname2\";\n machine = { ... };\n testScript = ''\n # ...\n '';\n })\n ./path/to/test.nix\n];\n"} +``` + + +## nixos.importables +Packages of paths to be passed to modules as `specialArgs`. + + +*_Type_*: +attribute set + + +*_Default_* +``` +{} +``` + + + + +## nixos.importables.suites +collections of profiles + + +*_Type_*: +null or attribute set of list of paths or anything convertible to its or path convertible to it + + +*_Default_* +``` +null +``` + + + + diff --git a/doc/api-reference.md b/doc/api-reference.md new file mode 100755 index 0000000..47eb128 --- /dev/null +++ b/doc/api-reference.md @@ -0,0 +1,80 @@ +# Top Level API +`digga`'s top level API. API Containers are documented in their respective sub-chapter: + +- [Channels](./api-reference-channels.md) +- [Home](./api-reference-home.md) +- [Devshell](./api-reference-devshell.md) +- [NixOS](./api-reference-nixos.md) +- [Darwin](./api-reference-darwin.md) + +## channelsConfig +nixpkgs config for all channels + + +*_Type_*: +attribute set or path convertible to it + + +*_Default_* +``` +{} +``` + + + + +## inputs +The flake's inputs + +*_Type_*: +attribute set of nix flakes + + + + + + +## outputsBuilder +builder for flake system-spaced outputs +The builder gets passed an attrset of all channels + + +*_Type_*: +function that evaluates to a(n) attribute set or path convertible to it + + +*_Default_* +``` +"channels: { }" +``` + + + + +## self +The flake to create the DevOS outputs for + +*_Type_*: +nix flake + + + + + + +## supportedSystems +The systems supported by this flake + + +*_Type_*: +list of strings + + +*_Default_* +``` +["aarch64-linux","aarch64-darwin","i686-linux","x86_64-darwin","x86_64-linux"] +``` + + + + diff --git a/doc/bud/get.md b/doc/bud/get.md deleted file mode 100644 index 12263df..0000000 --- a/doc/bud/get.md +++ /dev/null @@ -1,10 +0,0 @@ -# get -The `get` subcommand is useful for getting a bare copy of devos without the -git history. - -## Usage -```sh -bud get DEST-DIR -``` - -If DEST-DIR is ommitted, it defaults to _./devos_. diff --git a/doc/bud/index.md b/doc/bud/index.md deleted file mode 100644 index 7b98579..0000000 --- a/doc/bud/index.md +++ /dev/null @@ -1,24 +0,0 @@ -# [`bud`][bud] command -The template incudes a convenient script for managing your system called [`bud`][bud]. - -It is a portable and highly composable system control tool that work anywhere on your host -or in the flake's devshell. - -Although it comes with some predefined standard helpers, -it is very extensible and you are encouraged to write your own script snippets -to ease your workflows. An example is the bud module for a `get` command that -comes included with `devos`. - -While writing scripts you can convenientely access smart environment variables -that can tell the current architecture, user or host name, among others, regardless -wether you invoke `bud` within the devshell or as the system-wide installed `bud`. - -For details, please review the [bud repo][bud]. - -## Usage -```sh -bud help -``` - - -[bud]: https://github.com/divnix/bud diff --git a/doc/concepts/users.md b/doc/concepts/users.md index b2a6c2a..b345424 100644 --- a/doc/concepts/users.md +++ b/doc/concepts/users.md @@ -49,19 +49,18 @@ argument that gets passed to your home-manager users. ## External Usage You can easily use the defined home-manager configurations outside of NixOS -using the `homeConfigurations` flake output. The [bud](../bud/index.md) helper -script makes this even easier. +using the `homeConfigurations` flake output. -This is great for keeping your environment consistent across Unix systems, -including OSX. +This is great for keeping your environment consistent across Unix-like systems, +including macOS. ### From within the projects devshell: ```sh -# builds the nixos user defined in the NixOS host -bud home NixOS nixos +# builds the pub-solar user defined in the PubSolarOS host +nix build '.#homeConfigurations."pub-solar@PubSolarOS".activationPackage' # build and activate -bud home NixOS nixos switch +nix build '.#homeConfigurations."pub-solar@PubSolarOS".activationPackage' && ./result/activate && unlink result ``` ### Manually from outside the project: diff --git a/doc/start/bootstrapping.md b/doc/start/bootstrapping.md deleted file mode 100644 index b8a0ad0..0000000 --- a/doc/start/bootstrapping.md +++ /dev/null @@ -1,102 +0,0 @@ -# Bootstrapping - -This will help you boostrap a bare host with the help of the -[bespoke iso](./iso.md) live installer. - -_Note: nothing prevents you from remotely executing the boostrapping -process. See below._ - -Once your target host has booted into the live iso, you need to partition -and format your disk according to the [official manual][manual]. - -## Mount partitions - -Then properly mount the formatted partitions at `/mnt`, so that you can -install your system to those new partitions. - -Mount `nixos` partition to `/mnt` and — for UEFI — `boot` -partition to `/mnt/boot`: - -```console -$ mount /dev/disk/by-label/nixos /mnt -$ mkdir -p /mnt/boot && mount /dev/disk/by-label/boot /mnt/boot # UEFI only -$ swapon /dev/disk/by-label/swap -``` - -Add some extra space to the store. In the iso, it's running on a tmpfs -off your RAM: -```console -$ mkdir -p /mnt/tmpstore/{work,store} -$ mount -t overlay overlay -olowerdir=/nix/store,upperdir=/mnt/tmpstore/store,workdir=/mnt/tmpstore/work /nix/store -``` - -## Install - -Install off of a copy of devos from the time the iso was built: - -```console -$ cd /iso/devos -$ nixos-install --flake .#NixOS -``` - -## Notes of interest - -### Remote access to the live installer - -The iso live installer comes preconfigured with a network configuration -which announces it's hostname via [MulticastDNS][mDNS] as `hostname.local`, -that is `bootstrap.local` in the [iso example](./iso). - -In the rare case that [MulticastDNS][mDNS] is not availabe or turned off -in your network, there is a static link-local IPv6 address configured to -`fe80::47`(mnemonic from the letter's position in the english alphabet: -`n=14 i=9 x=24; 47 = n+i+x`). - -Provided that you have added your public key to the authorized keys of the -`root` user _(hint: [`deploy-rs`](../integrations/deploy.md) needs passwordless -sudo access)_: - -```nix -{ ... }: -{ - users.users.root.openssh.authorizedKeys.keyFiles = [ - ../secrets/path/to/key.pub - ]; -} -``` - -You can then ssh into the live installer through one of the -following options: - -```console -ssh root@bootstrap.local - -ssh root@fe80::47%eno1 # where eno1 is your network interface on which you are linked to the target -``` - -_Note: the [static link-local IPv6 address][staticLLA] and [MulticastDNS][mDNS] is only -configured on the live installer. If you wish to enable [MulticastDNS][mDNS] -for your environment, you ought to configure that in a regular [profile](../concepts/profiles.md)._ - -### EUI-64 LLA & Host Identity - -The iso's IPv6 Link Local Address (LLA) is configured with a static 64-bit Extended -Unique Identifiers (EUI-64) that is derived from the host interface's Message -Authentication Code (MAC) address. - -After a little while (a few seconds), you can remotely discover this unique and host -specific address over [NDP][NDP] for example with: - -```console -ip -6 neigh show # also shows fe80::47 -``` - -***This LLA is stable for the host, unless you need to swap that particular network card.*** -Under this reservation, though, you may use this EUI-64 to wire up a specific -(cryptographic) host identity. - - -[manual]: https://nixos.org/manual/nixos/stable/index.html#sec-installation-partitioning -[mDNS]: https://en.wikipedia.org/wiki/Multicast_DNS -[NDP]: https://en.wikipedia.org/wiki/Neighbor_Discovery_Protocol -[staticLLA]: https://tools.ietf.org/html/rfc7404 diff --git a/doc/start/from-nixos.md b/doc/start/from-nixos.md deleted file mode 100644 index 3e8c84d..0000000 --- a/doc/start/from-nixos.md +++ /dev/null @@ -1,51 +0,0 @@ -# From NixOS - -## Generate Configuration -Assuming you're happy with your existing partition layout, you can generate a -basic NixOS configuration for your system using: -```sh -bud up -``` - -This will make a new file `hosts/up-$(hostname).nix`, which you can edit to -your liking. - -You must then add a host to `nixos.hosts` in flake.nix: -```nix -{ - nixos.hosts = { - modules = hosts/NixOS.nix; - }; -} -``` - -Make sure your `i18n.defaultLocale` and `time.timeZone` are set properly for -your region. Keep in mind that `networking.hostName` will be automatically -set to the name of your host; - -Now might be a good time to read the docs on [suites](../concepts/suites.md) and -[profiles](../concepts/profiles.md) and add or create any that you need. - -> ##### _Note:_ -> While the `up` sub-command is provided as a convenience to quickly set up and -> install a "fresh" NixOS system on current hardware, committing these files is -> discouraged. -> -> They are placed in the git staging area automatically because they would be -> invisible to the flake otherwise, but it is best to move what you need from -> them directly into a host module of your own making, and commit that instead. -# Installation - -Once you're ready to deploy `hosts/my-host.nix`: -```sh -bud my-host switch -``` - - -This calls `nixos-rebuild` with sudo to build and install your configuration. - -> ##### _Notes:_ -> - Instead of `switch`, you can pass `build`, `test`, `boot`, etc just as with -> `nixos-rebuild`. - - diff --git a/doc/start/index.md b/doc/start/index.md index 2cd14d9..9650ba0 100644 --- a/doc/start/index.md +++ b/doc/start/index.md @@ -2,25 +2,35 @@ The only dependency is nix, so make sure you have it [installed][install-nix]. ## Get the Template -Here is a snippet that will get you the template without the git history: +If you currently don't have flakes setup, you can utilize the digga shell to pull the template: ```sh -nix-shell -p cachix --run "cachix use nrdxp" - -nix-shell https://github.com/divnix/devos/archive/main.tar.gz -A shell \ - --run "bud get main" - -cd devos - -nix-shell +nix-shell "https://github.com/divnix/digga/archive/main.tar.gz" \ + --run "nix flake init -t github:divnix/digga" +``` +If you already have flakes support, you can directly pull the template: +```sh +nix flake init -t github:divnix/digga +``` +Then make sure to create the git repository: +```sh git init git add . git commit -m init ``` -This will place you in a new folder named `devos` with git initialized, and a -nix-shell that provides all the dependencies, including the unstable nix -version required. +To drop into a nix-shell, if you don't have flakes setup, use the digga shell to create a `flake.lock`: +```sh +nix-shell "https://github.com/divnix/digga/archive/main.tar.gz" \ + --run "nix flake lock" +``` +Or if you do have flakes support, just run: +```sh +nix flake lock +``` + +Finally, run `nix-shell` to get to an interactive shell with all the dependencies, including the unstable nix +version required. You can run `menu` to confirm that you are using digga (expected output includes [docs], [general commands], [linter], etc.). In addition, the [binary cache](../integrations/cachix.md) is added for faster deployment. @@ -33,9 +43,8 @@ In addition, the [binary cache](../integrations/cachix.md) is added for faster d > you can try with sudo: `sudo nix-shell -p cachix --run "cachix use nrdxp"` ## Next Steps: + - [Make installable ISO](./iso.md) -- [Bootstrap Host](./bootstrapping.md) -- [Already on NixOS](./from-nixos.md) [install-nix]: https://nixos.org/manual/nix/stable/#sect-multi-user-installation diff --git a/doc/start/iso.md b/doc/start/iso.md index 76af1c6..b8fa665 100644 --- a/doc/start/iso.md +++ b/doc/start/iso.md @@ -1,22 +1,36 @@ -# ISO +# Installation Media + +This project leverages [nix-community/nixos-generators][nixos-generators] for +building machine images. In most cases, you'll probably want to use the +`install-iso` format. + +Making an installable ISO for `hosts/bootstrap.nix` is as simple as: -Making and writing an installable iso for `hosts/bootstrap.nix` is as simple as: ```sh -bud build bootstrap bootstrapIso -sudo -E $(which bud) burn +nix run github:nix-community/nixos-generators -- \ + --format install-iso \ + --flake '.#bootstrap' ``` -This works for any host. +Then "burn" the ISO to your USB stick (or CD-R if you like!) following the +[instructions in the NixOS manual][burn] (or using your preferred USB burner). -## ISO image nix store & cache +You can also swap out the `--format` for [any of the others][formats] supported +by nixos-generators. -The iso image holds the store to the live environment and _also_ acts as a binary cache -to the installer. To considerably speed up things, the image already includes all flake -`inputs` as well as the `devshell` closures. +Continue by following the usual installation instructions in the NixOS manual. -While you _could_ provision any machine with a single stick, a custom-made iso for -the host you want to install DevOS to, maximises those local cache hits. +## ISO Nix Store and Cache -For hosts that don't differ too much, a single usb stick might be ok, whereas when -there are bigger differences, a custom-made usb stick will be considerably faster. +The ISO image holds the Nix store for the live environment and _also_ acts as a +binary cache to the installer. To considerably speed things up, the image +already includes all flake `inputs` as well as the `devshell` closures. +While you _could_ provision any NixOS machine with the same USB stick, an ISO +custom-made for your target host will maximise those local cache hits. For hosts +that don't differ too much, a single USB stick might be ok, whereas when there +are bigger differences, a custom-made USB stick will be considerably faster. + +[nixos-generators]: https://github.com/nix-community/nixos-generators +[burn]: https://nixos.org/manual/nixos/stable/index.html#sec-booting-from-usb +[formats]: https://github.com/nix-community/nixos-generators/tree/master/formats diff --git a/flake.lock b/flake.lock index 2e4bdbc..857bb98 100644 --- a/flake.lock +++ b/flake.lock @@ -20,26 +20,6 @@ "type": "github" } }, - "beautysh": { - "inputs": { - "flake-utils": "flake-utils", - "nixpkgs": "nixpkgs", - "poetry2nix": "poetry2nix" - }, - "locked": { - "lastModified": 1641830469, - "narHash": "sha256-uhDmgNP/biOWe4FtOa6c2xZnREH+NP9rdrMm0LccRUk=", - "owner": "lovesegfault", - "repo": "beautysh", - "rev": "e85d9736927c0fcf2abb05cb3a2d8d9b4502a2eb", - "type": "github" - }, - "original": { - "owner": "lovesegfault", - "repo": "beautysh", - "type": "github" - } - }, "blank": { "locked": { "lastModified": 1625557891, @@ -55,31 +35,6 @@ "type": "github" } }, - "bud": { - "inputs": { - "beautysh": "beautysh", - "devshell": [ - "digga", - "devshell" - ], - "nixpkgs": [ - "nixos" - ] - }, - "locked": { - "lastModified": 1654190822, - "narHash": "sha256-B8z3stYaULNDBBjzJHrFHGgiJHrLqhBkxH+9u5iBP7E=", - "owner": "divnix", - "repo": "bud", - "rev": "0ff3e4e4b8791ea4d827bf5bfcac28cef060f209", - "type": "github" - }, - "original": { - "owner": "divnix", - "repo": "bud", - "type": "github" - } - }, "darwin": { "inputs": { "nixpkgs": [ @@ -145,7 +100,7 @@ }, "devshell": { "inputs": { - "flake-utils": "flake-utils_2", + "flake-utils": "flake-utils", "nixpkgs": [ "digga", "nixpkgs" @@ -251,11 +206,11 @@ }, "flake-utils": { "locked": { - "lastModified": 1631561581, - "narHash": "sha256-3VQMV5zvxaVLvqqUrNz3iJelLw30mIVSfZmAaauM3dA=", + "lastModified": 1642700792, + "narHash": "sha256-XqHrk7hFb+zBvRg6Ghl+AZDq03ov6OshJLiSWOoX5es=", "owner": "numtide", "repo": "flake-utils", - "rev": "7e5bf3925f6fbdfaf50a2a7ca0be2879c4261d19", + "rev": "846b2ae0fc4cc943637d3d1def4454213e203cba", "type": "github" }, "original": { @@ -266,7 +221,7 @@ }, "flake-utils-plus": { "inputs": { - "flake-utils": "flake-utils_3" + "flake-utils": "flake-utils_2" }, "locked": { "lastModified": 1654029967, @@ -284,21 +239,6 @@ } }, "flake-utils_2": { - "locked": { - "lastModified": 1642700792, - "narHash": "sha256-XqHrk7hFb+zBvRg6Ghl+AZDq03ov6OshJLiSWOoX5es=", - "owner": "numtide", - "repo": "flake-utils", - "rev": "846b2ae0fc4cc943637d3d1def4454213e203cba", - "type": "github" - }, - "original": { - "owner": "numtide", - "repo": "flake-utils", - "type": "github" - } - }, - "flake-utils_3": { "locked": { "lastModified": 1644229661, "narHash": "sha256-1YdnJAsNy69bpcjuoKdOYQX0YxZBiCYZo4Twxerqv7k=", @@ -313,7 +253,7 @@ "type": "github" } }, - "flake-utils_4": { + "flake-utils_3": { "locked": { "lastModified": 1649676176, "narHash": "sha256-OWKJratjt2RW151VUlJPRALb7OU2S5s+f0vLj4o1bHM=", @@ -435,7 +375,7 @@ "nixos-generators": { "inputs": { "nixlib": "nixlib", - "nixpkgs": "nixpkgs_2" + "nixpkgs": "nixpkgs" }, "locked": { "lastModified": 1657748715, @@ -468,16 +408,16 @@ }, "nixpkgs": { "locked": { - "lastModified": 1633971123, - "narHash": "sha256-WmI4NbH1IPGFWVkuBkKoYgOnxgwSfWDgdZplJlQ93vA=", + "lastModified": 1637186689, + "narHash": "sha256-NU7BhgnwA/3ibmCeSzFK6xGi+Bari9mPfn+4cBmyEjw=", "owner": "NixOS", "repo": "nixpkgs", - "rev": "e4ef597edfd8a0ba5f12362932fc9b1dd01a0aef", + "rev": "7fad01d9d5a3f82081c00fb57918d64145dc904c", "type": "github" }, "original": { "owner": "NixOS", - "ref": "nixos-unstable-small", + "ref": "nixpkgs-unstable", "repo": "nixpkgs", "type": "github" } @@ -498,22 +438,6 @@ "type": "github" } }, - "nixpkgs_2": { - "locked": { - "lastModified": 1637186689, - "narHash": "sha256-NU7BhgnwA/3ibmCeSzFK6xGi+Bari9mPfn+4cBmyEjw=", - "owner": "NixOS", - "repo": "nixpkgs", - "rev": "7fad01d9d5a3f82081c00fb57918d64145dc904c", - "type": "github" - }, - "original": { - "owner": "NixOS", - "ref": "nixpkgs-unstable", - "repo": "nixpkgs", - "type": "github" - } - }, "nur": { "locked": { "lastModified": 0, @@ -529,7 +453,7 @@ "nvfetcher": { "inputs": { "flake-compat": "flake-compat_3", - "flake-utils": "flake-utils_4", + "flake-utils": "flake-utils_3", "nixpkgs": [ "nixos" ] @@ -548,37 +472,9 @@ "type": "github" } }, - "poetry2nix": { - "inputs": { - "flake-utils": [ - "bud", - "beautysh", - "flake-utils" - ], - "nixpkgs": [ - "bud", - "beautysh", - "nixpkgs" - ] - }, - "locked": { - "lastModified": 1633382856, - "narHash": "sha256-hYlet806M9xJj4yxf0g5fhDT2IEUVIMAl7sqIeZ8DUM=", - "owner": "nix-community", - "repo": "poetry2nix", - "rev": "705cbfa10e3d9bfed2e59e0256844ae3704dbd7e", - "type": "github" - }, - "original": { - "owner": "nix-community", - "repo": "poetry2nix", - "type": "github" - } - }, "root": { "inputs": { "agenix": "agenix", - "bud": "bud", "darwin": "darwin", "deploy": "deploy", "digga": "digga", diff --git a/flake.nix b/flake.nix index 85e0560..bf050b2 100644 --- a/flake.nix +++ b/flake.nix @@ -17,10 +17,6 @@ digga.inputs.home-manager.follows = "home"; digga.inputs.deploy.follows = "deploy"; - bud.url = "github:divnix/bud"; - bud.inputs.nixpkgs.follows = "nixos"; - bud.inputs.devshell.follows = "digga/devshell"; - home.url = "github:nix-community/home-manager/release-22.05"; home.inputs.nixpkgs.follows = "nixos"; @@ -47,7 +43,6 @@ outputs = { self , digga - , bud , nixos , home , nixos-hardware @@ -101,7 +96,6 @@ digga.nixosModules.nixConfig home.nixosModules.home-manager agenix.nixosModules.age - bud.nixosModules.bud ]; }; diff --git a/hosts/bootstrap.nix b/hosts/bootstrap.nix index 541ca6f..ba50991 100644 --- a/hosts/bootstrap.nix +++ b/hosts/bootstrap.nix @@ -1,6 +1,6 @@ { profiles, ... }: { - # build with: `bud build bootstrap bootstrapIso` + # build with: `nix build '.#nixosConfigurations.bootstrap.config.system.build.bootstrapIso'` # reachable on the local link via ssh root@fe80::47%eno1 # where 'eno1' is replaced by your own machine's network # interface that has the local link to the target machine diff --git a/modules/core/default.nix b/modules/core/default.nix index c7457c1..7b16826 100644 --- a/modules/core/default.nix +++ b/modules/core/default.nix @@ -28,10 +28,14 @@ in config = { pub-solar = { - terminal-life.enable = true; audio.enable = lib.mkIf (!cfg.lite) true; crypto.enable = lib.mkIf (!cfg.lite) true; devops.enable = lib.mkIf (!cfg.lite) true; + + terminal-life = { + enable = true; + lite = cfg.lite; + }; }; }; } diff --git a/modules/terminal-life/default.nix b/modules/terminal-life/default.nix index 8ecb991..6bd0312 100644 --- a/modules/terminal-life/default.nix +++ b/modules/terminal-life/default.nix @@ -7,6 +7,14 @@ in { options.pub-solar.terminal-life = { enable = mkEnableOption "Life in black and white"; + + lite = mkOption { + description = '' + Enable a lite edition of terminal-life with less modules and a reduced package set. + ''; + default = false; + type = types.bool; + }; }; config = mkIf cfg.enable { diff --git a/modules/terminal-life/nvim/default.nix b/modules/terminal-life/nvim/default.nix index 1d6645f..bc06943 100644 --- a/modules/terminal-life/nvim/default.nix +++ b/modules/terminal-life/nvim/default.nix @@ -1,6 +1,7 @@ { config, pkgs, ... }: let psCfg = config.pub-solar; + cfg = config.pub-solar.terminal-life; xdg = config.home-manager.users."${psCfg.user.name}".xdg; preview-file = pkgs.writeShellScriptBin "preview-file" (import ./preview-file.nix pkgs); @@ -76,7 +77,7 @@ in withRuby = true; withPython3 = true; - extraPackages = with pkgs; [ + extraPackages = with pkgs; lib.mkIf (!cfg.lite) [ ccls gopls nodejs diff --git a/overlays/overrides.nix b/overlays/overrides.nix index fd0b836..4159bf3 100644 --- a/overlays/overrides.nix +++ b/overlays/overrides.nix @@ -8,6 +8,7 @@ channels: final: prev: { discord element-desktop rage + nix-index nixpkgs-fmt qutebrowser signal-desktop diff --git a/shell/default.nix b/shell/default.nix index d22b3af..597a2d2 100644 --- a/shell/default.nix +++ b/shell/default.nix @@ -1,7 +1,6 @@ { self, inputs, ... }: { modules = with inputs; [ - bud.devshellModules.bud ]; exportedModules = [ ./devos.nix diff --git a/shell/devos.nix b/shell/devos.nix index 2198052..bd3399a 100644 --- a/shell/devos.nix +++ b/shell/devos.nix @@ -1,12 +1,22 @@ -{ pkgs, extraModulesPath, inputs, ... }: +{ pkgs, extraModulesPath, inputs, lib, ... }: let + inherit (pkgs) + agenix + cachix + editorconfig-checker + mdbook + nixUnstable + nixpkgs-fmt + nvfetcher + ; + hooks = import ./hooks; pkgWithCategory = category: package: { inherit package category; }; + devos = pkgWithCategory "devos"; linter = pkgWithCategory "linter"; docs = pkgWithCategory "docs"; - devos = pkgWithCategory "devos"; in { @@ -44,15 +54,15 @@ in } (linter nixpkgs-fmt) (linter editorconfig-checker) - # (docs python3Packages.grip) too many deps + (docs mdbook) + ] + ++ lib.optionals (!pkgs.stdenv.buildPlatform.isi686) [ + (devos cachix) + ] + ++ lib.optionals (pkgs.stdenv.hostPlatform.isLinux && !pkgs.stdenv.buildPlatform.isDarwin) [ + (devos inputs.nixos-generators.defaultPackage.${pkgs.system}) (devos deploy-rs) ] - ++ lib.optional - (system != "i686-linux") - (devos cachix) - ++ lib.optional - (system != "aarch64-darwin") - (devos inputs.nixos-generators.defaultPackage.${pkgs.system}) ; } diff --git a/shell/hooks/pre-commit.sh b/shell/hooks/pre-commit.sh index 985d3b4..a7fa908 100755 --- a/shell/hooks/pre-commit.sh +++ b/shell/hooks/pre-commit.sh @@ -14,13 +14,16 @@ nix_files=($($diff -- '*.nix')) all_files=($($diff)) # Format staged nix files. -if [[ -n "${nix_files[@]}" ]]; then +if (( ${#nix_files[@]} != 0 )); then nixpkgs-fmt "${nix_files[@]}" \ && git add "${nix_files[@]}" fi # check editorconfig -editorconfig-checker -- "${all_files[@]}" +if (( ${#all_files[@]} != 0 )); then + editorconfig-checker -- "${all_files[@]}" +fi + if [[ $? != '0' ]]; then printf "%b\n" \ "\nCode is not aligned with .editorconfig" \