# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).
{
  config,
  pkgs,
  lib,
  ...
}: let
  psCfg = config.pub-solar;
in {
  imports = [
    # Include the results of the hardware scan.
    ./hardware-configuration.nix
  ];

  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;
  boot.kernelParams = [
    "boot.shell_on_fail=1"
    "ip=135.181.179.123::135.181.179.65:255.255.255.192:nougat-2.b12f.io::off"
  ];
  networking.hostName = "nougat-2";

  # The mdadm RAID1s were created with 'mdadm --create ... --homehost=hetzner',
  # but the hostname for each machine may be different, and mdadm's HOMEHOST
  # setting defaults to '<system>' (using the system hostname).
  # This results mdadm considering such disks as "foreign" as opposed to
  # "local", and showing them as e.g. '/dev/md/hetzner:root0'
  # instead of '/dev/md/root0'.
  # This is mdadm's protection against accidentally putting a RAID disk
  # into the wrong machine and corrupting data by accidental sync, see
  # https://bugzilla.redhat.com/show_bug.cgi?id=606481#c14 and onward.
  # We do not worry about plugging disks into the wrong machine because
  # we will never exchange disks between machines, so we tell mdadm to
  # ignore the homehost entirely.
  environment.etc."mdadm.conf".text = ''
    HOMEHOST <ignore>
    ARRAY /dev/md/SSD metadata=1.2 name=nixos:SSD UUID=f8189c09:cb247cc7:22b79b5f:df888705
    ARRAY /dev/md/HDD metadata=1.2 name=nixos:HDD UUID=85ed8a8e:9ddc5f09:c6ef6110:c00728fa
  '';
  # The RAIDs are assembled in stage1, so we need to make the config
  # available there.
  boot.initrd.services.swraid.enable = true;
  boot.initrd.services.swraid.mdadmConf = config.environment.etc."mdadm.conf".text;

  boot.initrd.network.enable = true;
  boot.initrd.network.ssh = {
    enable = true;
    port = 22;
    authorizedKeys =
      if psCfg.user.publicKeys != null
      then psCfg.user.publicKeys
      else [];
    hostKeys = ["/etc/secrets/initrd/ssh_host_ed25519_key"];
  };

  # Network (Hetzner uses static IP assignments, and we don't use DHCP here)
  networking.useDHCP = false;
  networking.interfaces."enp0s31f6".ipv4.addresses = [
    {
      address = "135.181.179.123";
      prefixLength = 26;
    }
  ];
  networking.defaultGateway = "135.181.179.65";

  networking.interfaces."enp0s31f6".ipv6.addresses = [
    #{
    #  address = "2a01:4f9:3a:2170::1";
    #  prefixLength = 64;
    #}
  ];
  networking.defaultGateway6 = {
    address = "fe80::1";
    interface = "enp0s31f6";
  };

  networking.nameservers = ["8.8.8.8"];

  # Initial empty root password for easy login:
  users.users.root.initialHashedPassword = "";
  users.users.root.openssh.authorizedKeys.keys =
    if psCfg.user.publicKeys != null
    then psCfg.user.publicKeys
    else [];

  services.openssh.enable = true;
  services.openssh.settings.PermitRootLogin = "prohibit-password";

  pub-solar.core.disk-encryption-active = false;
  pub-solar.core.lite = true;

  virtualisation = {
    docker = {
      enable = true;
      extraOptions = ''
        --data-root /data/docker
      '';
    };

    oci-containers = {
      backend = "docker";
    };
  };

  security.sudo.extraRules = [
    {
      users = ["${psCfg.user.name}"];
      commands = [
        {
          command = "ALL";
          options = ["NOPASSWD"];
        }
      ];
    }
  ];

  # This value determines the NixOS release with which your system is to be
  # compatible, in order to avoid breaking some software such as database
  # servers. You should change this only after NixOS release notes say you
  # should.
  system.stateVersion = "23.05"; # Did you read the comment?
}