{ config, pkgs, ... }: { imports = [ # Include the results of the hardware scan. ./hardware-configuration.nix ]; # Use GRUB2 as the boot loader. # We don't use systemd-boot because Hetzner uses BIOS legacy boot. boot.loader.systemd-boot.enable = false; boot.loader.grub = { enable = true; efiSupport = false; mirroredBoots = [ { devices = [ "/dev/disk/by-id/nvme-SAMSUNG_MZVL21T0HCLR-00B00_S676NF0R517371" ]; path = "/boot1"; } { devices = [ "/dev/disk/by-id/nvme-KXG60ZNV1T02_TOSHIBA_Z9NF704ZF9ZL" ]; path = "/boot2"; } ]; copyKernels = true; }; boot.supportedFilesystems = [ "zfs" ]; boot.kernelParams = [ "boot.shell_on_fail=1" "ip=138.201.80.102::138.201.80.65:255.255.255.192:nachtigall::off" ]; boot.initrd.availableKernelModules = [ "igb" ]; networking.hostName = "nachtigall"; networking.domain = "pub.solar"; networking.hostId = "00000001"; # enable flakes by default nix = { package = pkgs.nixFlakes; extraOptions = '' experimental-features = nix-command flakes ''; }; # Set your time zone. time.timeZone = "Etc/UTC"; environment = { # just a couple of packages to make our lives easier systemPackages = with pkgs; [ vim ]; }; # Network (Hetzner uses static IP assignments, and we don't use DHCP here) networking.useDHCP = false; networking.interfaces."enp35s0".ipv4.addresses = [ { address = "138.201.80.102"; prefixLength = 26; } ]; networking.interfaces."enp35s0".ipv6.addresses = [ { address = "2a01:4f8:172:1c25::1"; prefixLength = 64; } ]; networking.defaultGateway = "138.201.80.65"; networking.defaultGateway6 = { address = "fe80::1"; interface = "enp35s0"; }; services.resolved = { enable = true; extraConfig = '' DNS=9.9.9.9#dns.quad9.net 149.112.112.112#dns.quad9.net 2620:fe::fe#dns.quad9.net 2620:fe::9#dns.quad9.net 193.110.81.0#dns0.eu 185.253.5.0#dns0.eu 2a0f:fc80::#dns0.eu 2a0f:fc81::#dns0.eu FallbackDNS=5.1.66.255#dot.ffmuc.net 185.150.99.255#dot.ffmuc.net 2001:678:e68:f000::#dot.ffmuc.net 2001:678:ed0:f000::#dot.ffmuc.net Domains=~. DNSOverTLS=yes ''; }; users.users.root.initialHashedPassword = "$y$j9T$bIN6GjQkmPMllOcQsq52K0$q0Z5B5.KW/uxXK9fItB8H6HO79RYAcI/ZZdB0Djke32"; # This value determines the NixOS release with which your system is to be # compatible, in order to avoid breaking some software such as database # servers. You should change this only after NixOS release notes say you # should. system.stateVersion = "23.05"; # Did you read the comment? }