Update docs for versions (#20750)
This commit is contained in:
wxiaoguang
GitHub
parent
802c5313e1
commit
3d76d6034e
|
|
@ -1503,6 +1503,11 @@ ROUTER = console
|
|||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; NOTICE: this section is for Gitea 1.18 and later. If you are using Gitea 1.17 or older,
|
||||
;; please refer to
|
||||
;; https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini
|
||||
;; https://github.com/go-gitea/gitea/blob/release/v1.17/docs/content/doc/advanced/config-cheat-sheet.en-us.md
|
||||
;;
|
||||
;ENABLED = false
|
||||
;;
|
||||
;; Buffer length of channel, keep it as it is if you don't know what it is.
|
||||
|
|
@ -1516,12 +1521,12 @@ ROUTER = console
|
|||
;; - dummy: send email messages to the log as a testing phase.
|
||||
;; If your provider does not explicitly say which protocol it uses but does provide a port,
|
||||
;; you can set SMTP_PORT instead and this will be inferred.
|
||||
;; (Before 1.18, this was controlled via MAILER_TYPE and IS_TLS_ENABLED.)
|
||||
;; (Before 1.18, see the notice, this was controlled via MAILER_TYPE and IS_TLS_ENABLED.)
|
||||
;PROTOCOL =
|
||||
;;
|
||||
;; Mail server address, e.g. smtp.gmail.com.
|
||||
;; For smtp+unix, this should be a path to a unix socket instead.
|
||||
;; (Before 1.18, this was combined with SMTP_PORT as HOST.)
|
||||
;; (Before 1.18, see the notice, this was combined with SMTP_PORT as HOST.)
|
||||
;SMTP_ADDR =
|
||||
;;
|
||||
;; Mail server port. Common ports are:
|
||||
|
|
|
|||
|
|
@ -296,8 +296,8 @@ The following configuration set `Content-Type: application/vnd.android.package-a
|
|||
- `MINIMUM_KEY_SIZE_CHECK`: **true**: Indicate whether to check minimum key size with corresponding type.
|
||||
|
||||
- `OFFLINE_MODE`: **false**: Disables use of CDN for static files and Gravatar for profile pictures.
|
||||
- `CERT_FILE`: **https/cert.pem**: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if `ENABLE_ACME=true`. From 1.11 paths are relative to `CUSTOM_PATH`.
|
||||
- `KEY_FILE`: **https/key.pem**: Key file path used for HTTPS. This is ignored if `ENABLE_ACME=true`. From 1.11 paths are relative to `CUSTOM_PATH`.
|
||||
- `CERT_FILE`: **https/cert.pem**: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
|
||||
- `KEY_FILE`: **https/key.pem**: Key file path used for HTTPS. This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
|
||||
- `STATIC_ROOT_PATH`: **./**: Upper level of template and static files path.
|
||||
- `APP_DATA_PATH`: **data** (**/data/gitea** on docker): Default path for application data.
|
||||
- `STATIC_CACHE_TIME`: **6h**: Web browser cache time for static resources on `custom/`, `public/` and all uploaded avatars. Note that this cache is disabled when `RUN_MODE` is "dev".
|
||||
|
|
@ -438,11 +438,11 @@ Configuration at `[queue]` will set defaults for queues with overrides for indiv
|
|||
- `MAX_ATTEMPTS`: **10**: Maximum number of attempts to create the wrapped queue
|
||||
- `TIMEOUT`: **GRACEFUL_HAMMER_TIME + 30s**: Timeout the creation of the wrapped queue if it takes longer than this to create.
|
||||
- Queues by default come with a dynamically scaling worker pool. The following settings configure this:
|
||||
- `WORKERS`: **0** (v1.14 and before: **1**): Number of initial workers for the queue.
|
||||
- `WORKERS`: **0**: Number of initial workers for the queue.
|
||||
- `MAX_WORKERS`: **10**: Maximum number of worker go-routines for the queue.
|
||||
- `BLOCK_TIMEOUT`: **1s**: If the queue blocks for this time, boost the number of workers - the `BLOCK_TIMEOUT` will then be doubled before boosting again whilst the boost is ongoing.
|
||||
- `BOOST_TIMEOUT`: **5m**: Boost workers will timeout after this long.
|
||||
- `BOOST_WORKERS`: **1** (v1.14 and before: **5**): This many workers will be added to the worker pool if there is a boost.
|
||||
- `BOOST_WORKERS`: **1**: This many workers will be added to the worker pool if there is a boost.
|
||||
|
||||
Gitea creates the following non-unique queues:
|
||||
|
||||
|
|
@ -634,7 +634,7 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
|
|||
|
||||
- `QUEUE_LENGTH`: **1000**: Hook task queue length. Use caution when editing this value.
|
||||
- `DELIVER_TIMEOUT`: **5**: Delivery timeout (sec) for shooting webhooks.
|
||||
- `ALLOWED_HOST_LIST`: **external**: Since 1.15.7. Default to `*` for 1.15.x, `external` for 1.16 and later. Webhook can only call allowed hosts for security reasons. Comma separated list.
|
||||
- `ALLOWED_HOST_LIST`: **external**: Webhook can only call allowed hosts for security reasons. Comma separated list.
|
||||
- Built-in networks:
|
||||
- `loopback`: 127.0.0.0/8 for IPv4 and ::1/128 for IPv6, localhost is included.
|
||||
- `private`: RFC 1918 (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) and RFC 4193 (FC00::/7). Also called LAN/Intranet.
|
||||
|
|
@ -649,6 +649,12 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
|
|||
|
||||
## Mailer (`mailer`)
|
||||
|
||||
⚠️ This section is for Gitea 1.18 and later. If you are using Gitea 1.17 or older,
|
||||
please refer to
|
||||
[Gitea 1.17 app.ini example](https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini)
|
||||
and
|
||||
[Gitea 1.17 configuration document](https://github.com/go-gitea/gitea/blob/release/v1.17/docs/content/doc/advanced/config-cheat-sheet.en-us.md)
|
||||
|
||||
- `ENABLED`: **false**: Enable to use a mail service.
|
||||
- `PROTOCOL`: **\<empty\>**: Mail server protocol. One of "smtp", "smtps", "smtp+startls", "smtp+unix", "sendmail", "dummy". _Before 1.18, this was inferred from a combination of `MAILER_TYPE` and `IS_TLS_ENABLED`._
|
||||
- SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
|
||||
|
|
|
|||
|
|
@ -15,7 +15,14 @@ menu:
|
|||
|
||||
# 配置说明
|
||||
|
||||
这是针对Gitea配置文件的说明，你可以了解Gitea的强大配置。需要说明的是，你的所有改变请修改 `custom/conf/app.ini` 文件而不是源文件。所有默认值可以通过 [app.example.ini](https://github.com/go-gitea/gitea/blob/master/custom/conf/app.example.ini) 查看到。如果你发现 `%(X)s` 这样的内容，请查看 [ini](https://github.com/go-ini/ini/#recursive-values) 这里的说明。标注了 :exclamation: 的配置项表明除非你真的理解这个配置项的意义，否则最好使用默认值。
|
||||
这是针对Gitea配置文件的说明，你可以了解Gitea的强大配置。需要说明的是，你的所有改变请修改 `custom/conf/app.ini` 文件而不是源文件。
|
||||
所有默认值可以通过 [app.example.ini](https://github.com/go-gitea/gitea/blob/master/custom/conf/app.example.ini) 查看到。
|
||||
如果你发现 `%(X)s` 这样的内容，请查看 [ini](https://github.com/go-ini/ini/#recursive-values) 这里的说明。
|
||||
标注了 :exclamation: 的配置项表明除非你真的理解这个配置项的意义，否则最好使用默认值。
|
||||
|
||||
## ⚠️时效性警告⚠️
|
||||
|
||||
此文档的内容可能过于陈旧或者错误，请参考英文文档。
|
||||
|
||||
{{< toc >}}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue