Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
As more and more options can be set for creating the repository, I don't
think we should put all of them into the creation web page which will
make things look complicated and confusing.
And I think we need some rules about how to decide which should/should
not be put in creating a repository page. One rule I can imagine is if
this option can be changed later and it's not a MUST on the creation,
then it can be removed on the page. So I found trust model is the first
one.
This PR removed the trust model selections on creating a repository web
page and kept others as before.
This is also a preparation for #23894 which will add a choice about SHA1
or SHA256 that cannot be changed once the repository created.
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
- If there's a error with the Git command in `checkIfPRContentChanged`
the stderr wasn't concatendated to the error, which results in still not
knowing why an error happend.
- Adds concatenation for stderr to the returned error.
- Ref: https://codeberg.org/forgejo/forgejo/issues/2077
Co-authored-by: Gusted <postmaster@gusted.xyz>
I noticed the `BuildAllRepositoryFiles` function under the Alpine folder
is unused and I thought it was a bug.
But I'm not sure about this. Was it on purpose?
#28361 introduced `syncBranchToDB` in `CreateNewBranchFromCommit`. This
PR will revert the change because it's unnecessary. Every push will
already be checked by `syncBranchToDB`.
This PR also created a test to ensure it's right.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Using the Go Official tool `golang.org/x/tools/cmd/deadcode@latest`
mentioned by [go blog](https://go.dev/blog/deadcode).
Just use `deadcode .` in the project root folder and it gives a list of
unused functions. Though it has some false alarms.
This PR removes dead code detected in `models/issues`.
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
## Changes
- Add deprecation warning to `Token` and `AccessToken` authentication
methods in swagger.
- Add deprecation warning header to API response. Example:
```
HTTP/1.1 200 OK
...
Warning: token and access_token API authentication is deprecated
...
```
- Add setting `DISABLE_QUERY_AUTH_TOKEN` to reject query string auth
tokens entirely. Default is `false`
## Next steps
- `DISABLE_QUERY_AUTH_TOKEN` should be true in a subsequent release and
the methods should be removed in swagger
- `DISABLE_QUERY_AUTH_TOKEN` should be removed and the implementation of
the auth methods in question should be removed
## Open questions
- Should there be further changes to the swagger documentation?
Deprecation is not yet supported for security definitions (coming in
[OpenAPI Spec version
3.2.0](https://github.com/OAI/OpenAPI-Specification/issues/2506))
- Should the API router logger sanitize urls that use `token` or
`access_token`? (This is obviously an insufficient solution on its own)
---------
Co-authored-by: delvh <dev.lh@web.de>
- Currently there's code to recover gracefully from panics that happen
within the execution of cron tasks. However this recover code wasn't
being run, because `RunWithShutdownContext` also contains code to
recover from any panic and then gracefully shutdown Forgejo. Because
`RunWithShutdownContext` registers that code as last, that would get run
first which in this case is not behavior that we want.
- Move the recover code to inside the function, so that is run first
before `RunWithShutdownContext`'s recover code (which is now a noop).
Fixes: https://codeberg.org/forgejo/forgejo/issues/1910
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
- Push commits updates are run in a queue and updates can come from less
traceable places such as Git over SSH, therefor add more information
about on which repository the pushUpdate failed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1723
(cherry picked from commit 37ab9460394800678d2208fed718e719d7a5d96f)
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Say to the binding middleware which locale should be used for the
required error.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1683
(cherry picked from commit 5a2d7966127b5639332038e9925d858ab54fc360)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Changed behavior to calculate package quota limit using package `creator
ID` instead of `owner ID`.
Currently, users are allowed to create an unlimited number of
organizations, each of which has its own package limit quota, resulting
in the ability for users to have unlimited package space in different
organization scopes. This fix will calculate package quota based on
`package version creator ID` instead of `package version owner ID`
(which might be organization), so that users are not allowed to take
more space than configured package settings.
Also, there is a side case in which users can publish packages to a
specific package version, initially published by different user, taking
that user package size quota. Version in fix should be better because
the total amount of space is limited to the quota for users sharing the
same organization scope.
Fixes https://codeberg.org/forgejo/forgejo/issues/1458
Some mails such as issue creation mails are missing the reply-to-comment
address. This PR fixes that and specifies which comment types should get
a reply-possibility.
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223dab054f7f760b7ccae69e745eebfabb)
Co-authored-by: Gusted <postmaster@gusted.xyz>
The steps to reproduce it.
First, create a new oauth2 source.
Then, a user login with this oauth2 source.
Disable the oauth2 source.
Visit users -> settings -> security, 500 will be displayed.
This is because this page only load active Oauth2 sources but not all
Oauth2 sources.
After many refactoring PRs for the "locale" and "template context
function", now the ".locale" is not needed for web templates any more.
This PR does a clean up for:
1. Remove `ctx.Data["locale"]` for web context.
2. Use `ctx.Locale` in `500.tmpl`, for consistency.
3. Add a test check for `500 page` locale usage.
4. Remove the `Str2html` and `DotEscape` from mail template context
data, they are copy&paste errors introduced by #19169 and #16200 . These
functions are template functions (provided by the common renderer), but
not template data variables.
5. Make email `SendAsync` function mockable (I was planning to add more
tests but it would make this PR much too complex, so the tests could be
done in another PR)
