This PR
- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
Regression of #24536. If the user doesn't explicitly disable Actions, it
will be enabled.
1. Gitea will call `loadRepositoryFrom` before `loadActionsFrom`.
25d4f95df2/modules/setting/setting.go (L234-L237)
2. In `loadRepositoryFrom`,
`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` will set
`actions.ENABLED` with `true`.
25d4f95df2/modules/setting/repository.go (L313-L315)
3. In `loadActionsFrom`, `rootCfg.Section("actions")` will get a section
with Actions enabled.
25d4f95df2/modules/setting/actions.go (L23-L26)
Although the cause of the problem was using `true` by copy-paste
mistake, it also surprised me that
**`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` doesn't
only read, but also write.**
Make mailer SMTP check have timed context
Otherwise Gitea may block for long time if the DNS request blocks.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds support for the systemd notify protocol. Several status
messagess are provided. We should likely add a common notify/status
message for graceful.
Replaces #21140
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: ltdk <usr@ltdk.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
minio storage iterator shows different behavior with local fs iterator.
in local fs storage:
``` go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "prefix/xxx.file"
})
```
in minio storage:
```go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "xxx.file"
})
```
I think local fs is correct, minio use wrong `basePath` to trim storage
path prefix.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
`http.ServeFile/ServeContent` handles `If-xxx`, `Content-Length`,
`Range` and `Etag` correctly
After this PR, storage files (eg: avatar) could be responded with
correct Content-Length.
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Although some features are mixed together in this PR, this PR is not
that large, and these features are all related.
Actually there are more than 70 lines are for a toy "test queue", so
this PR is quite simple.
Major features:
1. Allow site admin to clear a queue (remove all items in a queue)
* Because there is no transaction, the "unique queue" could be corrupted
in rare cases, that's unfixable.
* eg: the item is in the "set" but not in the "list", so the item would
never be able to be pushed into the queue.
* Now site admin could simply clear the queue, then everything becomes
correct, the lost items could be re-pushed into queue by future
operations.
3. Split the "admin/monitor" to separate pages
4. Allow to download diagnosis report
* In history, there were many users reporting that Gitea queue gets
stuck, or Gitea's CPU is 100%
* With diagnosis report, maintainers could know what happens clearly
The diagnosis report sample:
[gitea-diagnosis-20230510-192913.zip](https://github.com/go-gitea/gitea/files/11441346/gitea-diagnosis-20230510-192913.zip)
, use "go tool pprof profile.dat" to view the report.
Screenshots:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Replaces #24641
Currently, unit tests fail when run locally (unless users have minio
instance running). This PR only requires redis unit tests if in CI.
- Only run redis unit tests when `CI` env variable is set
- Add minio as a service in unit tests actions
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.
I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.
## ⚠️ BREAKING
If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
#### Added
- API: Create a branch directly from commit on the create branch API
- Added `old_ref_name` parameter to allow creating a new branch from a
specific commit, tag, or branch.
- Deprecated `old_branch_name` parameter in favor of the new
`old_ref_name` parameter.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
The "modules/context.go" is too large to maintain.
This PR splits it to separate files, eg: context_request.go,
context_response.go, context_serve.go
This PR will help:
1. The future refactoring for Gitea's web context (eg: simplify the context)
2. Introduce proper "range request" support
3. Introduce context function
This PR only moves code, doesn't change any logic.
Due to #24409 , we can now specify '--not' when getting all commits from
a repo to exclude commits from a different branch.
When I wrote that PR, I forgot to also update the code that counts the
number of commits in the repo. So now, if the --not option is used, it
may return too many commits, which can indicate that another page of
data is available when it is not.
This PR passes --not to the commands that count the number of commits in
a repo
Help some users like #16832#1851
There are many users reporting similar problem: if the SECRET_KEY
mismatches, some operations (like 2FA login) only reports unclear 500
error and unclear "base64 decode error" log （some maintainers ever spent
a lot of time on debugging such problem)
The SECRET_KEY was not well-designed and it is also a kind of technical
debt. Since it couldn't be fixed easily, it's good to add clearer error
messages, then at least users could know what the real problem is.
---------
Co-authored-by: delvh <dev.lh@web.de>
This gives more "freshness" to the explore page. So it's not just the
same X users on the explore page by default, now it matches the same
sort as the repos on the explore page.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Replace #22117. Implement it in a more maintainable way.
Some licenses have placeholders e.g. the BSD licenses start with this
line:
```
Copyright (c) <year> <owner>.
```
This PR replaces the placeholders with the correct value when initialize
a new repo.
### FAQ
- Why not use a regex?
It will be a pretty complicated regex which could be hard to maintain.
- There're still missing placeholders.
There are over 500 licenses, it's impossible for anyone to inspect all
of them alone. Please help to add them if you find any, and it is also
OK to leave them for the future.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
close#24449
The unit of `Actions` should be contorlled not only by
`repository.DISABLED_REPO_UNITS` but also by `actions.ENABLED`
in the `app.ini`.
Previously, the permission of the team's `Actions` unit was not
controlled by `actions.Enabled`. So, even if the user sets
`actions.Enabled` to false, he can still select the permission of the
`Actions` unit for the team.
This PR makes the permissions of the team's `Actions` unit also
controlled by `actions.Enabled`. Just append`TypeActions` into
`DisabledRepoUnits` slice when initializing if `actions.Enabled` is
false.
### Changes:
If `Actions` is set disbaled in `app.ini`, like below:
```yaml
[actions]
ENABLED = false
```
1. If user try to create/edit a team, will prompt user that `Actions` is disabled.
2. `actions` is not displayed in the sidebar on the team details page
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
The ordering of the final token causing a close of the queue in this
test may be out of sync due to concurrency. Instead just use ensure that
the queue is closed when everything expected is done.
Fixes: https://github.com/go-gitea/gitea/issues/23608
Fixes: https://github.com/go-gitea/gitea/issues/23977
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The old `HTMLRender` is not ideal.
1. It shouldn't be initialized multiple times, it consumes a lot of
memory and is slow.
2. It shouldn't depend on short-lived requests, the `WatchLocalChanges`
needs a long-running context.
3. It doesn't make sense to use FuncsMap slice.
HTMLRender was designed to only work for GItea's specialized 400+
templates, so it's good to make it a global shared instance.
For my specific use case, I'd like to get all commits that are on one
branch but NOT on the other branch.
For instance, I'd like to get all the commits on `Branch1` that are not
also on `master` (I.e. all commits that were made after `Branch1` was
created).
This PR adds a `not` query param that gets passed down to the `git log`
command to allow the user to exclude items from `GetAllCommits`.
See [git
documentation](https://git-scm.com/docs/git-log#Documentation/git-log.txt---not)
---------
Co-authored-by: Giteabot <teabot@gitea.io>
