- When the user is not found in `reloadparam`, early return when the
user is not found to avoid calling `IsUserVisibleToViewer` which in turn
avoids causing a NPE.
- This fixes the case that a 500 error and 404 error is shown on the
same page.
- Add integration test for non-existant user RSS.
- Regression by c6366089df
(cherry picked from commit f0e06962786ef8c417b0c6f07940c1909d3b91ba)
(cherry picked from commit 75d806690875a4fc38eb1e3c904096be34657011)
(cherry picked from commit 4d0a1e0637450865c7bbac69e42d92d63b95149c)
(cherry picked from commit 5f40a485da1b2c5f129f32e2ddc2065e3ba9ccd0)
(cherry picked from commit c4cb7812e39add6f7ff3d6f3f2d4e02c66435f0e)
(cherry picked from commit d31ce2f03d69cc784e53e921968c714986a7a4ef)
(cherry picked from commit cfebef4f82643d4be4dd89d277d9ebc9ca98a26e)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4c6a8980cef932e224e84933d7c9262)
(cherry picked from commit 639dafabec0a5c1f943b44ca02f72c5ba2fc5e10)
(cherry picked from commit d699c12cebea7dbbda950ae257a46d53c39f22ea)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30ab5c7a40a456600cdaa8a0fbdccec2)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e56f4ecb3a4f6d1109d02c8aa1a6d182)
(cherry picked from commit 03989418a70d3445e0edada7fbe5a4151d7836b1)
(cherry picked from commit f50e0dfe5e90d6a31c5b59e687580e8b2725c22b)
(cherry picked from commit cad9184a3653e6c80de2e006a0d699b816980987)
(cherry picked from commit e2da5d7fe13a685606913a131687a94f9f5fcfeb)
(cherry picked from commit 3a80534d4db523efe56b368489f81dc1cb2c99f7)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd3146b0b942a94e2482b37595180e91)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da5630f9148faaf6b03bf1ac5724fa86b25)
(cherry picked from commit f7535a1cef96ce0589f37907f88b024cd095d0ac)
(cherry picked from commit 1a90cd37c31a1b9c770d6d79a4663ed8d67845c0)
(cherry picked from commit d86d71340afd372e5b5083d5563c2f5b48d975e6)
(cherry picked from commit 9e5cce1afccebcd6146e5e0d364bfdbb840b5276)
(cherry picked from commit 2013fb3fab5e23d0088434d835411f26a3fd9905)
(cherry picked from commit 88b9d21d1194abd133c3b4cbaa19792da433cb43)
(cherry picked from commit 72c020298eebcb0c90e23e7ff35e37be867afc44)
(cherry picked from commit 6525f730dfdd7cb412762d9e30348801335d17ee)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef35978336612588d68c1315179a45c73)
(cherry picked from commit b15bafcbc7d9033b0cc7b0fd888915b117e08d42)
(cherry picked from commit 93ba05a2dd9fdec46f337542cd5f22c8960ac55f)
(cherry picked from commit e418ea80822361e387b460c583592bbd83d4a39e)
(cherry picked from commit 321790a91ec8553d1b3668f606ebec762865dd17)
(cherry picked from commit f4e19d332392cb455b3b4e32e271f3e42302bbc8)
(cherry picked from commit 4d9923dee851a4046050761d3dd352f2f343f4fc)
(cherry picked from commit 049df69eda1ceb47f6e74c9a67e9ce5041e65c3b)
Conflicts:
services/doctor/push_mirror_consistency.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit c79cba8d556320be0da7ca8324b39cd8930465bf)
(cherry picked from commit f3a3969c02cade7261a5f25c9e342800ccdf9111)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f407c0e110f3c7a4102bf7ed7902b815f)
(cherry picked from commit de8f2e03cc7d274049dd6a849b3d226968782644)
(cherry picked from commit 0182cff12ed4b68bd49ebc2b9951d9a29f7a36ca)
(cherry picked from commit 9c74254d4606febd702315c670db4fb6b14040a1)
(cherry picked from commit 2f0b68f821ae53dd12b496cc660353d5bf7cd143)
(cherry picked from commit 079b995d49ba7a625035fe9ec53741f6b0112007)
(cherry picked from commit 6952ea6ee3de8157d056c4381de7529de6eaef7b)
(cherry picked from commit 6c7d5a5d140152be80ec38a979a2a7b704ce653a)
(cherry picked from commit 49c39f0ed5a011b26f2e33f35811bb31fab3cf64)
(cherry picked from commit a8f9727388192c6c22b2f8cbbae15a96203ec3b6)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384b081c36aa4c6b7167280f52c1c42d3)
(cherry picked from commit 9b9aca2a02b06f41f6db847a77ea29f6385b46d2)
(cherry picked from commit 0d0ab1af1fb05e26168c112523f1400fef67f9b0)
(cherry picked from commit d3b352c85482e59c9d1da24a8fe0eb68b0f5858e)
(cherry picked from commit d6af2094df4611d590d8c5062743f5e39f2a7bd8)
(cherry picked from commit f96e55a7a9f06ff987a5e9663da492720d162b76)
(cherry picked from commit bb6261f8479ee8925ddc7f0079b414ef85f04d73)
(cherry picked from commit f6a4146161fda22341c17dc74d42fd13ad181e1f)
(cherry picked from commit ed0292137991d08ee2e6518e74ec221f94f51415)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02b180d49dd025eb373dd8ab6d787cf7)
(cherry picked from commit 2cebe3ef94e6db45091ca8f02b2ed770b23564d6)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a41b69e313535e5e91e4272136a4bab1)
(cherry picked from commit c58566403df728c1f71b1dd554a573c011a59d7e)
(cherry picked from commit b8b3f6ab8b576a28ed06cc0e501b14950cf78282)
(cherry picked from commit 195520100b214d6bf7a2740507f0a7ae10e5a7d1)
(cherry picked from commit 6e417087ddf41e79a146366a5db157c7a76af615)
(cherry picked from commit ff91e5957ac728118cddb06bddd95d32cb4df815)
(cherry picked from commit 6626d5cc75681d3b16b4496a4e0e83a257a3f46a)
(cherry picked from commit 62f8ab793b12251e1793bc14ace95cda76121baa)
(cherry picked from commit e5bbf1a2d060b4ef1324afd8ed9b38e294b3dffb)
(cherry picked from commit f5b8c8edea5d17ba51327684a6e8127ac0f09503)
(cherry picked from commit 50948fa11b9c9ccac9e86dc9943bad71cf189370)
(cherry picked from commit 83a9f7f4429ac4e91d7a80a0aced32cd74bbfc4c)
(cherry picked from commit 679438b5d621fd58d0618c28cd08abe0a5625037)
(cherry picked from commit 17db07d6d0fcf40980129274e35ca76306dd205f)
- https://github.com/NYTimes/gziphandler doesn't seems to be maintained
anymore and Forgejo already includes
https://github.com/klauspost/compress which provides a maintained and
faster gzip handler fork.
- Enables Jitter to prevent BREACH attacks, as this *seems* to be
possible in the context of Forgejo.
(cherry picked from commit cc2847241d82001babd8d40c87d03169f21c14cd)
(cherry picked from commit 99ba56a8761dd08e08d9499cab2ded1a6b7b970f)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/1581
(cherry picked from commit 711638193daa2311e2ead6249a47dcec47b4e335)
(cherry picked from commit 9c12a37fde6fa84414bf332ff4a066facdb92d38)
(cherry picked from commit d13065345431a499f9e0b7a3c2043d7487b8aa5b)
(cherry picked from commit 45a16f8c3c6f7d5e4aab8fdde6a621cf36e4801c)
(cherry picked from commit a497acb31f76d580c8b0567f9461274bd78080f4)
(cherry picked from commit fe87fd828973945192b98310c5c3b2001c6e0f86)
(cherry picked from commit 6ac12e6693cf45cb12109028dabd868957c4b74c)
(cherry picked from commit 981ec37e1e72ab19c20067ff4d2a7e20a60d3305)
(cherry picked from commit 5d6892ec10086f0ba63f26693faa82d0fd4e3f4a)
(cherry picked from commit 9df7968f4fc72de9788d84ca3f349e4c98ee630e)
(cherry picked from commit 7d588d183329cd760053663ea2e1e82e62958409)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2075
(cherry picked from commit defb101281f5a6ba410abc763674bafa7b63dffd)
(cherry picked from commit 5830f204a17767fda3e45d16dbf3af8c32e7f387)
(cherry picked from commit 029f4e98636a7776f430684e9d7142d69a444f96)
(cherry picked from commit 816fe558126d0ecce969fdf2a196fa6afdcca792)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 99866d804560b415b6158371eb0efd17d097cfe0)
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279
(cherry picked from commit 72c297521b1830360aab4b50e37efcc7e67e0d5d)
(cherry picked from commit 283f9648947f8dd2f315ecca19566ccca2b49c18)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fdee08efd02041c01abca47394a69bb8b)
(cherry picked from commit f3be6eb269526a9f4ea7861189f07977f2d4a32f)
(cherry picked from commit 78e1755b94c18c043e0c8f8c2849803cc8069feb)
(cherry picked from commit 73799479e0fb68534dac10f809ee246dbc809b62)
(cherry picked from commit 938359b94120b7ea7bcdfbfda265ada691620da1)
(cherry picked from commit b168a9c081f93c10d40319333fc24d68a4f9763c)
[GITEA] Detect file rename and show in history (squash) ctx.Locale
(cherry picked from commit 40447752ff97aa306295685dcf4ddd3b13f48320)
(cherry picked from commit ea23594cdbb12c32dc28638f65bf40e37d344e5f)
(cherry picked from commit cdc473850c85abcbe38c799c2d2446966978f2b2)
(cherry picked from commit 86e6641c29df213d7db1b85867dafebcafeee1dd)
(cherry picked from commit 2757de586b80834513e61033692ac72d25381431)
(cherry picked from commit def4ae32ddb4b0b83f6bb9c197e00fdcd784928e)
(cherry picked from commit 6dada09329e28840f7ad890bed333ae122838fb2)
(cherry picked from commit 5d6d5272513629b126917c30f7bfde421fdcbe27)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db31b243a7142b71bf4af36506752e6e)
(cherry picked from commit 04bcb22d5c00d1fa8b39e2a3cf2e73f0a8c1204f)
(cherry picked from commit e16241fd992c22203d113a4a11e7f57f9ed2ddb3)
(cherry picked from commit 8e2beb3ed5da1ac8a58608acdf059f607576ff96)
Signed-off-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit f48e3ff0db027c6420446c0bab3089d9a46194a8)
Removing comments and make command
(cherry picked from commit 7664a423a5abf051383374b4156857e83faee7c0)
(cherry picked from commit b2fb43536424f90373fdc177bd2c79c374efd2be)
(cherry picked from commit 0a24a819a9561c8355adb00b7b202438c5c1bc1a)
(cherry picked from commit 155cc19f75662998fcb2a1a08e345e0724437a58)
(cherry picked from commit 223537f71a05107d69eb5edb8d62d40e5fac5fee)
(cherry picked from commit ffbe2970cc7a778bfbcd9a93cc03bbc4bce38897)
(cherry picked from commit 836836bd73a5635ee13b032d1600e7da842db42c)
(cherry picked from commit 6b66fe449d5ee409ae5590ad08cdf46b7dfe8aa9)
(cherry picked from commit a3933d9c3abd14e74d4c8c41ad5824ba34c0424a)
(cherry picked from commit f1a49065f241886a9edc101ae360bf8b691fa400)
(cherry picked from commit 63f4935e7de1901082afec0bec0a7997fd158dbb)
(cherry picked from commit a1acdd76e6c41825ceb18445baacee1e8e627b3e)
(cherry picked from commit 7f902568043e54d7059e031b0d8ccdb504837891)
(cherry picked from commit 73620b0e8e01e7c52c9dff1097932b7bf1426be9)
(cherry picked from commit 587540c818e6a8190c0742e1906e35be94207143)
(cherry picked from commit 434d5366aca58383a12b22ac49797d5a54042b64)
(cherry picked from commit e80e193af4f30726278cad43a627ca268517d584)
(cherry picked from commit eb9be4cee6f53352cb18536dde945e1fb922ef4d)
(cherry picked from commit f81cfdc9357da67715ab369a3041fbb42028125f)
(cherry picked from commit ba69a943cb36d10e99037fcf7c052449edd13d2f)
(cherry picked from commit ea9bc8824889a8a873d029b9b17da2d1c4cf6425)
(cherry picked from commit ba02501caf1b32165fe2221e2706a9ceddc237db)
(cherry picked from commit 53ce632aadb71b80a65853a6a0d4d2d7fce66464)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda34cf2b2e392cc47125ed0f619b287b)
(cherry picked from commit 76dffc862103eb23d51445ef9d611296308c8413)
(cherry picked from commit ff0615b9d0f3ea4bd86a28c4ac5b0c4740230c81)
(cherry picked from commit 8712eaa394053a8c8f1f4cb17307e094c65c7059)
(cherry picked from commit 0c11587582b8837778ee85f4e3b04241e5d71760)
(cherry picked from commit 3cbd9fb7922177106b309f010dd34a68751873dc)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9e7cb9811452b30d5424fca41231a1f)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534ca6a2241c2a10cbecd7c96fb96558a6)
(cherry picked from commit d706d9e222469c689eb069ec609968296657dfdc)
(cherry picked from commit 6d46261a3f81d3642b313e76ad93c5f72fbd6bf8)
(cherry picked from commit f864d18ad30760bd1e2fb1925b87b19e3208ad97)
(cherry picked from commit 80f8620d0d746c7ce5e88eeef3ec62431c399ec8)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25cde57837a31738a10c71c9478e16662)
(cherry picked from commit 63e99df3d1ecb50da3b723848ca85d56b831a8d7)
(cherry picked from commit b65d777bc78fabf7e3d1bf8c50aff4eb5395d783)
(cherry picked from commit 2961f4f6320b4b38c33f33e7133e7f3d3f86bd0f)
(cherry picked from commit f7f723628c76c5c2a0678139fbc4264feea352ea)
(cherry picked from commit 9ed79158268160f62dc1b32183c9a487cd521ef7)
(cherry picked from commit 8b9ead46085b8a7f1a9c63f561bce4795ccca31d)
(cherry picked from commit 50eeaf1fbcf01d8616d8ea792a3b3cd736137f89)
(cherry picked from commit ee6f32820e5e0e4ea2ae61fc6a72c475e805b5ac)
(cherry picked from commit bf337bed3507a6554bbdd738e6ca1aa80d00df20)
(cherry picked from commit 6be9501ec0c6eceda8faa48a4d1dc875da702880)
(cherry picked from commit b39860570df95a860c151122a259becb6a221c0e)
(cherry picked from commit 3f30f486d516cac043dbdcd780b2277b6a3278d7)
(cherry picked from commit 5680ecdbe9b668ce69e5a55b2dd7fb7c0eb7087b)
(cherry picked from commit da6a19ad16bd9014ac37e02f10095880baeac65c)
(cherry picked from commit 5462493a77dc6f2bf8a0e07e6fbfbe9cce157bcd)
(cherry picked from commit 530fe57ddea58aab0d4bfb3b8373a8f4e1632514)
(cherry picked from commit f174f35644b2405567a97f6720a55f6cc5fe4f61)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59b853df59f6fafab2542f9a2dd82ca3)
(cherry picked from commit 6e3c0be5555076b1f8ef645b809b7d89deb4e1ad)
- The code and tests are already there to allow releases to be created
on commits.
- This patch modifies the web code to take into account that an commitID
could've been passed as target.
- Added unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1196
(cherry picked from commit 90863e0ab51d1b243f67de266bbeeb7a9031c525)
(cherry picked from commit c805aa23b5c6c9a8ab79e2e66786a4ef798e827a)
(cherry picked from commit cf45567ca60b2a9411694c8e9b649fd77c64bdae)
(cherry picked from commit 672a2b91e5612f438bd7951d173f42c223629fd1)
(cherry picked from commit 82c930152cd693f8451e9553504365c724e1fced)
(cherry picked from commit 95ac2508b3e8dd9fc2b0168600d989dbce0744ec)
(cherry picked from commit b13a81ab98a02e30d1b508bb89cdd67a05eae782)
(cherry picked from commit 9f463a7c1fa74ce17ab6ff8df49e2bcea3c1bc89)
(cherry picked from commit 758ce84dc58e0c689e0fcc34386c7a8ed50f3df9)
Conflicts:
tests/integration/release_test.go
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit edf0531aeead2f68bbb283e437494ace33a8d3b8)
(cherry picked from commit 44b29f3a1df81c072737b139cad34435313f086c)
(cherry picked from commit b851b674195ecf3020aba55c5f46704fa3405289)
(cherry picked from commit 37b408f5aac53bf72cd530722c774d7ace8356e1)
(cherry picked from commit e81dbedb88a8601cf5a071176ecdbf29a0018cc1)
(cherry picked from commit d5fa6be6ecc789448a45d4968ead4f958c33040b)
(cherry picked from commit b8c4be25297401bc570dbff41bf312545ade4b54)
(cherry picked from commit f23ce2843c59e442f63a240862d0d2e009a6eff2)
(cherry picked from commit 8b7bcabae27bc5f66c72c44693e1d051231d2a79)
(cherry picked from commit 2d6e52dda9b7f5fd29d7700f9a7835627aeada90)
(cherry picked from commit 42e4f3ffdd211d3bb45e505a0cf632172bcbf6b2)
(cherry picked from commit 39a1f689d8cb7a741cb10c35d4748fb54ecec34a)
(cherry picked from commit 553d4872f883b8ac5cd6e9e585c599201b06067a)
(cherry picked from commit df3743372576e708b03fe253eac0f37901a524be)
(cherry picked from commit d67eac487b6d5120cf7d4976b9c426eb4d00013a)
(cherry picked from commit 28cb0b191212457f90b661261b9d56ebc9e6e6bc)
(cherry picked from commit 031c04c579a24cb05bcd662f085f538954cd34ef)
[FEAT] add Forgejo Git Service (squash) register a Forgejo factory
If the Forgejo factory for the Forgejo service is not registered,
newDownloader will fallback to a git service and not migrate issues
etc.
Refs: https://codeberg.org/forgejo/forgejo/issues/1678
(cherry picked from commit 51938cd1613c789c7176ca59592689c3bf055f45)
[FEAT] add Forgero Git Service
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
(cherry picked from commit a878adfe628cf6dc367a17c3715fcd3499aa02b6)
Adding description and Forgejo SVG
(cherry picked from commit 13738c03804d019f28550e46a4ebc37dbe3a5cfc)
Undo reordering and tmpl redirection
(cherry picked from commit 9ae51c46f42acecac834371857e638098ebf6d27)
(cherry picked from commit 70fffdc61d06dd1d70b6a31496676a23d3d0c2fc)
(cherry picked from commit c0ebfa9da3db3e60d7b403a1bf8b8a19c32c5dc7)
(cherry picked from commit 9922c92787eccaba0021486ba0a3eb28583969e1)
(cherry picked from commit 00c0effbc74aedc7a4167a69c8a410ef324d576b)
(cherry picked from commit e4c9525b137205fa9ffdb4e0d7492bbbda9be6b5)
(cherry picked from commit 09d7b83211652d045975b0e3bb790856267d52a5)
(cherry picked from commit bbcd5975c91f6932f7f2ee07fbd63e84560ba96a)
(cherry picked from commit 55c70a0e18d33d8ac0da9ffb97f6d994ed88a319)
(cherry picked from commit 76596410c0dd0137cd497c9728c3e1d1c98f2430)
(cherry picked from commit 1308043931388bf6de691ad0f766861b77fb08a5)
(cherry picked from commit 919d6aedfed6abc8ec9def19f8deec2ee413252b)
[FEAT] add Forgero Git Service (squash) more tests
Previously only Gitea service was being tested under self-hosted migrations. Since Forgejo is also self-hosted and in fact use the same downloader/migrator we can add to this suite another test that will do the same, migrating the same repository under the same local instance but for the Forgejo service (represented by 9)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1709
Co-authored-by: zareck <cassiomilczareck@gmail.com>
Co-committed-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit 40a4b8f1a8637f78cf2f48104f0b336377652df9)
(cherry picked from commit 3198b4a64240b7d4e8b33d8b858a12d046db38c9)
(cherry picked from commit 4edda1f3890eb1b5bb9b1eeec1214dbc11f8e343)
(cherry picked from commit 4d91b77d29fd4b20be12bf21c31447722ff6da40)
(cherry picked from commit afe85c52e3c1c165c171443e3ba79caef1560e0d)
(cherry picked from commit 5ea7df79adfba4a85c7ebbccfb7da15b48eef19c)
(cherry picked from commit a667182542abab8ebb29905fb38afe509682c220)
(cherry picked from commit a9bebb1e71b8a20bb19352357a5b71b9b84c0d21)
(cherry picked from commit 4831a89e460bb982a497b6f22613149840b13a9c)
(cherry picked from commit e02a74651f9813cc72c64e391a2fa6e3c282ce3f)
(cherry picked from commit 05dcef59aa4d05b040fe4ae24d73f9d9660e6ed2)
(cherry picked from commit c8bac187f983150150a2652724bab8f923be44e0)
(cherry picked from commit c87903a0cc75daeee8783d9774158711011d4382)
- Change the values for the nodeinfo API, to use branded values.
- Resolves https://codeberg.org/forgejo/forgejo/issues/257
(cherry picked from commit 4608c57688d8b12dbc265dd21bfe7cd269efb116)
(cherry picked from commit e837e8a52943f803a40cd0151e24f7fe8edb11ec)
(cherry picked from commit 6601328d3ce9b57dbaa768dd2d41295293ff94f9)
(cherry picked from commit c6be21d4870e6b748a85f0da19bd4b717875b224)
(cherry picked from commit 5adc6ffee2e6f1af72039747df809aa6ebd2198f)
(cherry picked from commit 2ff8d166ac1e56ab7a349d70f875bd2ae9763418)
(cherry picked from commit b6a90e7e5af0e998cbbf1fc1edb901ae31090999)
(cherry picked from commit d1089e706cda009a6a23462adf498fd24a609b0a)
Conflicts:
tests/integration/api_nodeinfo_test.go
(cherry picked from commit 7a29df737d979abed4d37f084e3a92ee788d2c6e)
(cherry picked from commit 3655a30c60229167bc007e139d0461a5648741d5)
(cherry picked from commit c90d61141016ffbbaaa6b4f4657dacf5446f30c0)
(cherry picked from commit 0274bd8860bd00de628fba990e42bf7385ddf5b9)
(cherry picked from commit fdb786b71decd1c968f7c473c94463140f192fc3)
(cherry picked from commit 4f08f100a19886210b89d1cacfd09e6db0e48fb7)
(cherry picked from commit 56a27118227521fae93e052bb77265fb10c6dcf8)
(cherry picked from commit 3b2cfa452df0d2651a75c5e3fcd442c38acff109)
(cherry picked from commit 773ddcf956a897bbaa75aff3087f8a64b254239c)
(cherry picked from commit fe8321ed4e9dcf0df2dffb64b0245ec1ae8f075d)
(cherry picked from commit a94833643b6796000a69c7ff4dfbc0b5df98b0f4)
(cherry picked from commit 3fdbda7639f0690b1dc8b046a9b1979571714d41)
(cherry picked from commit 7bc63d2cd3144d00cbc9429297b994382140bd5d)
(cherry picked from commit a36400d9cf4392573d8bd13ded54a4c5689dd541)
(cherry picked from commit 2535ab42016132c2ee7882d3eb5eb42c00ed7e63)
(cherry picked from commit 692e72f4f64b4a0251ac7ac99a268b531d73c6fc)
(cherry picked from commit 265021f3e9f327da96df695f90d6e9d0a23dd824)
(cherry picked from commit bc833125d6b0a3c7b0fc117e3bb081cb9ec6f02c)
(cherry picked from commit f1f9f881559c4117a547afaa379bcd0c26afb1aa)
(cherry picked from commit 6076461ad7a77e77ecbd9963689435496d1852e6)
(cherry picked from commit cd1da0aa2bac7270b3da2c5b76da2ea197a2f32d)
(cherry picked from commit f4e9a251d80363360bbcd9280c68421e87ec1630)
(cherry picked from commit fed4a421acf90bbce18c120ed08995f8f212bcf6)
(cherry picked from commit cb3ef3211768a1725198aeb547937329a5f98b8e)
(cherry picked from commit 232eec1945c0adcc61b6a4e855fcff0d346c3ab0)
(cherry picked from commit 1390cd433a51f99c0fa5508a78f3160e5af8da69)
(cherry picked from commit e1fed5dd7ffda2bbd1898ecb112146af16b94e37)
(cherry picked from commit 5797dcbeb71406cf288354dea0efc40567743bfd)
(cherry picked from commit 7591d86b439a437976b378d946ff73961bd3bd98)
(cherry picked from commit 96eea095f672a36b88889c8825b753615ef62fd6)
(cherry picked from commit 0a29bba0fb7feb982d2f27212404c6adba04a535)
(cherry picked from commit 075da8a23764d2ad3939e20357a00cf20c3f62e2)
(cherry picked from commit d2a3085458415d39cee9fd5060427c0783e7d13e)
(cherry picked from commit dd39faa96c4367b91cec014404eca88ab370d00f)
(cherry picked from commit 9f15e5cc4926b5a1f036a592a48ec940be0a8561)
(cherry picked from commit 9a7e041380992d556e1dafd9eb3faa6f528b9f8a)
(cherry picked from commit 798aaadeac23ce2d334544b4757e37c774a74c7e)
(cherry picked from commit 8489bb91612b04c7bed8055b017c72a238b5081f)
(cherry picked from commit 0457646ca5657e0491d6202d565a7463043d1c34)
(cherry picked from commit 3ca76bc33f59f321aa5ed4cc2bf0ad2f02fbd9fd)
(cherry picked from commit c98047aa4d200dabf9a64b2bd30f35d6b33dbb89)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2299
This solves two bugs. One bug is that due to the JOIN with the
`forgejo_blocked_users` table, duplicated users were generated if a user
had more than one user blocked, this lead to receiving more than one
entry in the actions table. The other bug is that if a user blocked more
than one user, it would still receive a action entry by a
blocked user, because the SQL query would not exclude the other
duplicated users that was generated by the JOIN.
The new solution is somewhat non-optimal in my eyes, but it's better
than rewriting the query to become a potential perfomance blocker (usage
of WHERE IN, which cannot be rewritten to a JOIN). It simply removes the
watchers after it was retrieved by the SQL query.
(cherry picked from commit c63c00b39b8bd2ed3a69ed044933a9626bfca2c1)
(cherry picked from commit ad3cdc5705e00961426b2cff499425e30d9332fa)
- Block the creation of a issue if the user is blocked by the repository owner.
- Fix integration tests (This should ideally in the future all be
self-created fixtures instead of relying on the existing ones as a small
condition can make the tests be inaccurate).
(cherry picked from commit 88d3ee333aa91814bbe0b11d9fc1e62ffecae1b9)
(cherry picked from commit 146c82d232a5a4a81bbbebcae568b5c3b6117804)
(cherry picked from commit d9dc25d0382acf819900eae5f652d682c3594ef5)
(cherry picked from commit cd1eadd9234205bce443e61c52415de342493b13)
(cherry picked from commit 40a8584bbb4768d2527ad1558034ebd2ea1f5077)
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit 82d3e78bf783200b85089a584d83558958e8328d)
(cherry picked from commit 36c43dbf82145c7e4480f207aee4de39b7fe397e)
(cherry picked from commit 52f8e06095dfc39a675b8756fd1a1bc5ecc2a93e)
(cherry picked from commit a3f44f19765203a4d175365dfb21adeef64ea038)
(cherry picked from commit de2905919dcc645893d58d76cdc1f93f3046048a)
(cherry picked from commit d6d98d001f25ae1ebaf6e760f9fbe3ec411b26ce)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480388897db4d7b0cb397cf7135ab97b1)
(cherry picked from commit 0c32a4fde531018f74e01d9db6520895fcfa10cc)
(cherry picked from commit 1791130e3cb8470b9b39742e0004d5e4c7d1e64d)
(cherry picked from commit 37858b7e8fb6ba6c6ea0ac2562285b3b144efa19)
(cherry picked from commit a3e2bfd7e9eab82cc2c17061f6bb4e386a108c46)
(cherry picked from commit 7009b9fe87696b6182fab65ae82bf5a25cd39971)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec3479177e725cfc7cbbb9d94753226928d1c)
(cherry picked from commit e2f1b73752f6bd3f830297d8f4ac438837471226)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a1042197bd9136b58bc70ec7400a23471585)
(cherry picked from commit 37b4e6ef9b85e97d651cf350c9f3ea272ee8d76a)
(cherry picked from commit c17c121f2cf1f00e2a8d6fd6847705df47d0771e)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83cb2a1a4386769b79326088c5c4bbec7)
(cherry picked from commit 4743eaa6a0be0ef47de5b17c211dfe8bad1b7af9)
(cherry picked from commit eff5b43d2e843d5d537756d4fa58a8a010b6b527)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed11237088ccf6328571939af814984e)
(cherry picked from commit b1f3069a22a03734cffbfcd503ce004ba47561b7)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7e34038363c9ce8e1ef957ec1e22b06)
(cherry picked from commit 6d754db3e5faff93a58fab2867737f81f40f6599)
(cherry picked from commit 2a89ddc0acffa9aea0f02b721934ef9e2b496a88)
(cherry picked from commit 4a147bff7e963ab9dffcfaefa5c2c01c59b4c732)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c33918569f65f25b014f0d7fe6ac20f9036fc)
(cherry picked from commit 5a11569a011b7d0a14391e2b5c07d0af825d7b0e)
(cherry picked from commit 2373c801ee6b84c368b498b16e6ad18650b38f42)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707c3c86e7256faf1e6ba727224554de3)
(cherry picked from commit cfa539e590127b4b953b010fba3dea21c82a1714)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916bfef8ba8cbc4e9b042cc8740f45e28)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1b3cd06f6586512f1af4630e55d7ad4)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c888ebaafc863a6e463da87f70f5605da)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576eee0c7738b2f7df1acaf5bf7810d12)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec8701617830152680d69d50d64cb43cc2054a89)
(cherry picked from commit 313e6174d832501c57724ae7a6285194b7b81aab)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d0756ee20b6bf1eb999c988533a5066a68)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be1327ab98df2ba061dd7e2a278b278c5b)
(cherry picked from commit f911dc402508b04cd5d5fb2f3332c2d640e4556e)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fdaf06ee60da341dff76d703990c08082)
(cherry picked from commit 856a2e09036adf56d987c6eee364c431bc37fb2e)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e1e3dc3c59c9d75938b4647b6873ce7)
(cherry picked from commit d3d88667cbb928a6ff80658eba8ef0c6c508c9e0)
(cherry picked from commit 6818de13a921753e082b7c3d64c23917cc884e4b)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a37a744f092f2aeea6c9ef4795d7356)
(cherry picked from commit d510ea52d091503e841d66f2f604348add8b4535)
(cherry picked from commit 8249e93a14f628bb0e89fe3be678e4966539944e)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d2f1269aad3c019d039cf60d0fe4b10)
(cherry picked from commit 85505e0f815fede589c272d301c95204f9596985)
(cherry picked from commit 0f3cf17761f6caedb17550f69de96990c2090af1)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e548d317a4ee00f9efa9068794a733e3b)
(cherry picked from commit 1194fe4899eb39dcb9a2410032ad0cc67a62b92b)
(cherry picked from commit 9abb95a8441e227874fe156095349a3173cc5a81)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a319b14e819ead828d1d9875280d9259)
(cherry picked from commit 67f37c83461aa393c53a799918e9708cb9b89b30)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c6342cd2767ea12757ee2f78eaf443b)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b481ed1e60e816caf8f649e8397ee5fc)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c101223820de0bbafc318e9394c347b8)
(cherry picked from commit d3f9134aeeef784586e8412e8dbba0a8fceb0cd4)
(cherry picked from commit 7afe154c5c40bcc65accdf51c9224b2f7627a684)
(cherry picked from commit 99ac7353eb1e834a77fe42aa89208791cc2364ff)
(cherry picked from commit a9cde00c5c25ea8c427967cb7ab57abb618e44cb)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d1a3b8eb694bffbf77a7b25c56afd57)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e3309f6430b0af42855c6af832832ee)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9b0aa59f86760b24ecbc07815026c82)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac33013482ddbee2fa51510c6918ba54466)
(cherry picked from commit a92b4cfeb63b90eb2d90d0feb51cec62e0502d84)
(cherry picked from commit acaaaf07d999974dbe5f9c5e792621c597bfb542)
(cherry picked from commit 735818863c1793aa6f6983afedc4bd3b36026ca5)
(cherry picked from commit f50fa43b32160d0d88eca1dbdca09b5f575fb62b)
(cherry picked from commit e16683643388fb3c60ea478f1419a6af4f4aa283)
(cherry picked from commit 82a0e4a3814a66ce44be6a031bdf08484586c61b)
(cherry picked from commit ff233c19c4a5edcc2b99a6f41a2d19dbe8c08b3b)
(cherry picked from commit 8ad87d215f2b6adb978de77e53ba2bf7ea571430)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba6a0ea2f8644277baa74fc8f34ab95a)
(cherry picked from commit 7ee8db0f018340bc97f125415503e3e5db5f5082)
(cherry picked from commit e4f8b999bcd3b68b3ef7f54f5b17c3ada0308121)
(cherry picked from commit 05aea60b1302bbd3ea574a9c6c34e1005a5d73bf)
(cherry picked from commit dc0d61b012cfaf2385f71e97cda5f220b58b9fa4)
(cherry picked from commit f53fa583de671ff60a0a1d0f3ab8c260e1ba4e1f)
(cherry picked from commit c65b89a58d11b32009c710c2f5e75f0cd3539395)
(cherry picked from commit 69e50b9969db3ab71cefaed520757876a9629a5c)
(cherry picked from commit ec127440b86cb5fcf51799d8bd76a9fd6b9cebcc)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf67d0eb168d7bb430cf85dd8cd63c52)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366c749df80ffad44eed2988b8e64211e)
(cherry picked from commit 2776aec7e85850f1d7f01a090a72491550fb9d29)
(cherry picked from commit 1fbde36dc784b5b2cc6193f02ff0d436b0f2a629)
(cherry picked from commit 1293db3c4e5df218501f5add9f9d41101ffcb8aa)
(cherry picked from commit 6476802175bac3ef78dd8f24ff6bebc16f398a78)
(cherry picked from commit 5740f2fc830356acb7929a02fe304008b94a0ca5)
(cherry picked from commit afc12d7b6e9b773fa89718aa79cd95c0e0ce4406)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb1f7f73103ae0017d644f13ca3ab798)
(cherry picked from commit ed7de91f6ace23a1459bc6552edf719d62c7c941)
(cherry picked from commit 2d97929b9b7b8d979eb12bf0994d3f169d41f7fd)
(cherry picked from commit 50d035a7b058b9c4486c38cd4be0b02a4e1bf4d9)
(cherry picked from commit 0a0c07d78a1dee3489b97ab359bb957e3f7fb94b)
(cherry picked from commit 85e55c4dbc2f513f3d5254dac20915e8c3c22886)
(cherry picked from commit d8282122ad6e8b497de35d1ed89e3093a2cd5ee2)
(cherry picked from commit 3f0b3b6cc582c3d672d371dd9fe1203a56cb88c0)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596ffbfc4e754c28830ba028f6344dc5b)
(cherry picked from commit f0e3acadd321fcb99e8ea3e3ce1c69df25c4ca4d)
(cherry picked from commit 682c4effe69dc0d4ed304fa7ce6259d9ce573629)
(cherry picked from commit e43c2d84fd4b6fd31e2370cec1034262d12e5c34)
(cherry picked from commit 9c8e53ccc78053026e4f667889959c23c8d95934)
(cherry picked from commit a9eb7ac783b2c16ee3702a88203bf857cb4147fc)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40e32186892e89bfedd49edecf5b8f81)
(cherry picked from commit aa6e8672f9473a9100e7575051dec9eda37709a0)
(cherry picked from commit 58c7947e95648f50237ddcd46b6bd025b224a70f)
(cherry picked from commit f1aacb1851b232082febcd7870a40a56de3855a6)
(cherry picked from commit 0bf174af87f7de9a8d869304f709e2bf41f3dde9)
(cherry picked from commit f9706f4335df3b7688ed60853d917efa72fb464a)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea943dcece88f02d110b03d344308a261)
(cherry picked from commit 97b16bc19ae680db62608d6020b00fe5ac451c60)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafdb5b33a6d2d05d94038e950d97eb7de)
(cherry picked from commit 259912e3a69071c5ad57871464d0b79f69a8e72c)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032c18015b92c93a7617a5dd06d50bd2d)
(cherry picked from commit a176fee1607d571b25b345184f1c50d403029610)
(cherry picked from commit 0480b76dfeda968849e900da9454a3efd82590fa)
(cherry picked from commit 4bc06b7b3841c74e3d790b1ef635c2b382ca7123)
(cherry picked from commit 073094cf722a927a623408d66537c758d7d64e4c)
(cherry picked from commit ac6201c647a4d3a2cfb2b0303b851a8fe7a29444)
(cherry picked from commit 7e0812674da3fbd1e96bdda820962edad6826fbd)
(cherry picked from commit 068c741e5696957710b3d1c2e18c00be2ffaa278)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Forgejo has the option to delete users, in which all data except
issues and comments are removed, this makes sense in some cases where
users need to be removed cleanly but without removing their existing bug
reports or comments to an discussion. In the case of spammers, admins
have the option to enable purging, where comments are removed.
- Add issues to the list of things to be removed if purge is checked.
- No unit testing, as this gigantic function doesn't have one to begin
with.
- Add integration test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1268
(cherry picked from commit 3ed381c75826ffc6834fd54943f71579c060c16d)
(cherry picked from commit 44d00650ce77bd4395892a62a64a90829578c81d)
(cherry picked from commit 7f4da82779fa1d761b5fe045d3e0b4b2627638c0)
(cherry picked from commit d629314def8e3e6d0f78184aa584fa57ece18bb1)
Conflicts:
models/fixtures/issue.yml
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 794dcc218f2c0c53028aaf617407d46bddda57f3)
(cherry picked from commit c433f2ecb60669e5c8748912b30c0433d5fe507a)
(cherry picked from commit bb23683f4b10a504da677843bc2ae2b73ec299c4)
(cherry picked from commit 634c5604d430b1b531467783bc70bb4efbee023d)
(cherry picked from commit 219073f5c5558e7712039a83754f68b092689963)
(cherry picked from commit 32893dbab139e2d238db8c3d7878321c6bdd0cd3)
(cherry picked from commit 0ef40cfb5a23d9f654e093ade2668d82ce8d333a)
(cherry picked from commit e535409cab3c276fd8db6b402f85934ef5127491)
(cherry picked from commit 29059f611b5617d275737996b9e4076a3b0b667e)
(cherry picked from commit cd480c5b8b99feed11a3797ab36a697cd0dcc91b)
(cherry picked from commit 340e6573924dbd8d69843c69243e6b027c66f166)
(cherry picked from commit 3a7a5564d02bde767cb14cbc30e3ca816808f7d6)
(cherry picked from commit 1dbcaca726f3cbd777a4965b7414d6b60050ba54)
(cherry picked from commit c491c439e28f04fdd0f002ec1403b19933afc7c3)
(cherry picked from commit c8fe2140cc15dcffa9bb7c966493707ac23cdb74)
(cherry picked from commit c72564e3ee1bd9972d4f7d7a7e1dc34bb8d81299)
(cherry picked from commit 2084f3fa113bca751be0689f53dfeb7d059ffb8f)
(cherry picked from commit 918e65327da011303ba7dfb3ff6970b8c83f5319)
Refs: https://codeberg.org/forgejo/forgejo/pulls/2222
(cherry picked from commit 5f837efc15f3d1e0d7fbed7fc569251143266584)
fix: write xml header
(cherry picked from commit a715984a42be9da81c48106d5eae244098ac1108)
fix: optional elements and xml schema
(cherry picked from commit 6ea6895a3616246e7282aa20d8f010fa931b60ea)
fix: pass all other requests to file search
(cherry picked from commit 9bfc74833a3b657453b4519573598432a87e3e3c)
test: add integration test
(cherry picked from commit b798f4ce86daa78e694c5c142e6f5f44938e6cb6)
fix: use xmlResponse
(cherry picked from commit 7f76df0b246c64fac0eeb115642c8cb6eb676f36)
(cherry picked from commit e18d574ca40905aec52fbbe8247ba83fd01874dd)
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f889aeb52745eddb276225acd0153cba6)
(cherry picked from commit 7c07592d01b086b612195367c6a13560e5539767)
(cherry picked from commit 78637af2b6440ae307de5e21b284c08c02dd4d13)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd23c9ed586b9439e293bbd27cc89232)
(cherry picked from commit 1963085dd9d1521b7a4aa8558d409bd1a9f2e1da)
(cherry picked from commit fb94095d1992c3e47f03e0fccc98a90707a5271b)
(cherry picked from commit e1d1e46afee6891becdb6ccd027fc66843b56db9)
(cherry picked from commit 93993029e4ec8a20a8bc38d80bb4b801e52ee1b7)
(cherry picked from commit df3b058179d8f3e06cc6fb335b287c72c8952821)
(cherry picked from commit 8ccc6b9cba46a736665e4b25523da0baf1679702)
(cherry picked from commit 9fbe28fca35e3d02c23521e063679775ec0792f8)
(cherry picked from commit 4ef2be6dc705c693735e024b28fd7dac3de39d47)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3fe8f9eb732f86020e58b9ea4d8b5ec)
(cherry picked from commit 447009ff568a542985f6b3a9bc7237b9de3e3c54)
(cherry picked from commit 72c0a6150aee7c3a965c87e7348faa2b48c520de)
(cherry picked from commit 8ee9c070b98f64263d63dfef32d54bdad5f0d266)
(cherry picked from commit 89aba06403be898adbfff6b2d7bb01aad239a87c)
(cherry picked from commit 798407599f3d77bdd8bad5fa7abba81d417cd916)
(cherry picked from commit 41c9a2606bd8d7036e7d54ad7ab35af06ec99a34)
(cherry picked from commit a57b214e366435240c4a210115c6a3fda0d37f8b)
(cherry picked from commit fd287a91349bc7844544f9b6ff88e46157d3dc80)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63da9c33eed1e3d102cf28a92ff653d6)
(cherry picked from commit fef1a6dac5e25579e42d40209c4cfc06879948b9)
(cherry picked from commit b0c5165145fa52f2f7bbec1f50b308bdf1d20ef3)
(cherry picked from commit 7ad51b9f8d0647eecacd258f6ee26155da3872e1)
(cherry picked from commit 64f053f3834e764112cde26bb0d16c5e88d6b2af)
(cherry picked from commit f5e78e4c204ce50b800645d614218b6b6096eecb)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4bbadf388c7857040ee0774b824e418e)
(cherry picked from commit d955ab3ab02cbb7f1245a8cddec426d64d3ac500)
(cherry picked from commit 9220088f902a25c4690bcabf5a40a8d02e784182)
(cherry picked from commit c73ac636962c41c71814c273510146f0533264ab)
(cherry picked from commit 747a176048ea93085b406429db0e25bb21912eda)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
Refs: https://codeberg.org/forgejo/forgejo/pulls/1719
(cherry picked from commit ed3413891523b07d4da47347b632ad3a3c7bd16f)
(cherry picked from commit 166d769a6eda0cece2ccbfd3c12f1fce41e2c5b8)
(cherry picked from commit 8da818646c7c129b9a61b9b983f20ab1af897bc4)
(cherry picked from commit 95c9d6ede40f3aab7578f38b1881a2472fd20931)
(cherry picked from commit 505ffa2cc444d5917d394a2cebd5e4554d6a0370)
(cherry picked from commit 602bf1fa7f2f3d4db73dbab83ba889a6b9701427)
[TESTS] add TestAPIForkDifferentName (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit d600fabdbcaa8eb01e7b0f6bf337fa1aa844c2da)
(cherry picked from commit 40c1130c410359ab007c2b92081856ca0f805c55)
(cherry picked from commit 7b254f84cfd3aa58ee80d7ea8ae0e1c9636cdc3e)
(cherry picked from commit af15c5a60a773b4af8760f94b82ab704f19a29be)
(cherry picked from commit 852b42bc7a48620efd778cea728374cc1e325451)
(cherry picked from commit 90b3d0ca09a2057265ee371767232496399168ce)
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402c76bc4cccea2806f289e08a009baae)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa6555e0c9e922ee1e73dd2e4337360e9fe)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f58f0ab20c565a8f5d063b90fd741f97)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca31b97e97e84d5f5eb95a177cc44e2e)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a28581003545256632213bf4136b193d)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc6cba48ca4fe07d1a916d1f1a4b37b4)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fdb8e6273fdc35d7b5cc164b400207e9)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d39db7a4256cd9abf9c58b8d3e1b5c14)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1deb3039a399516a51c8b6757059c91)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808dd739c0c2e49e6b7ae2967f120f43c2)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e6b49e933dc6534040160dd739ff18a)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c551b3e50040acb7c914a00ead92de63f)
(cherry picked from commit d52f4eea44692ee773010cb66a69a603663947d5)
(cherry picked from commit 3540ea2a43155ca8cf5ab1a4a246babfb829db16)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade008c09122d825959171aa5346d645987)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6c7e7a50298fa67efad1e73723a0981)
(cherry picked from commit 2030f3b965cde401976821083c3250b404954ecc)
(cherry picked from commit f02aeb76981cd688ceaf6613f142a8a725be1437)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35e44faf7ff87143c0e52b8ba8a625c8)
(cherry picked from commit 8424d0ab3df75ac3ffa30f42d398e22995ada5e7)
(cherry picked from commit 5cc62caec788b54afd9da5b9193ce06ee8ec562b)
(cherry picked from commit d6300d5dcd01c7ddc65d8b0f326f9c19cb53b58e)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63a2dd746dd84a31ebf7f70d5b5d7c52)
(cherry picked from commit 5110476ee9010ba8cdca0e0f37f765f8800e9fe1)
(cherry picked from commit 77ba6be1dab4f6f3678d79a394da56e6447ebbe1)
(cherry picked from commit 9c8337b5c442cfd72d97597c2089e776f42828b7)
(cherry picked from commit 1d689eb686f0f7df09c7861b3faf9d8683cb933b)
(cherry picked from commit 511c519c875a4c4e65c02ef0c4e3b941f4da4371)
(cherry picked from commit 2f0b4a8f610837d34844bb79cda1360ab23b6b1c)
(cherry picked from commit fdd4da111c449322901a0acf6d0857eac4716581)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9e4af612a628171bd4f63a24860c272)
(cherry picked from commit c7b572c35d3e9e22017fd74045bcdc1109bd06df)
(cherry picked from commit aec7503ff6dd177980f3d9f367122ffc2fec8986)
(cherry picked from commit 87c65f2a490faeccb85088fa0981dd50f7199eb8)
(cherry picked from commit bd47ee33c20e53ae616a7e53d63c3b51809585fb)
(cherry picked from commit f3dbd90a747c14fb1b5b4271db6c10abbf86d586)
(cherry picked from commit 93a844dd13904c0ba1b7fd4a0a233002194a504b)
(cherry picked from commit 6d6d1a121ce3fc5cf7cd92ad1a38be3bdcbf7088)
(cherry picked from commit 8b101f2860dfbdfd99de71d30740c9e72e1cd9d5)
(cherry picked from commit 3e56212d6d1bca0aecdc1f224c7d78287ef9d35d)
(cherry picked from commit 4f619bc58583892c197ee2588ead929342336217)
(cherry picked from commit 06a47ea56efdb604c51d1bda91a9cd9eeee12bd2)
(cherry picked from commit 5a4d56e77b6b266f684bd36c652cb6496da8c1b4)
(cherry picked from commit 84b9d3a0c3a86e19f129cfb7ee4816e2eec12234)
(cherry picked from commit 1eb2eca71c1b4b58dcdb87b70b40b0666512c9d6)
(cherry picked from commit 11d0fe54009d34eca00827608ca8a97e21bc85db)
(cherry picked from commit c93b8b9d3c69bca079eb192eeb06850b80d901ef)
(cherry picked from commit 679a7e2efa85f2dcda3b17fc246c209a57d3dead)
(cherry picked from commit e31a3abb7dc8f8879c7077e37cd55b34014c2060)
(cherry picked from commit 72bedf68a7a86aa214169e67d3e0d04cafd4ce4b)
(cherry picked from commit ef139ac06f29d561c82c847c5d1a648db38dc759)
(cherry picked from commit 134bf839825d720fd43c08076f1dad2ba23aca51)
(cherry picked from commit caf5780c5758851cc5d7d584ed5e78291e5d1d14)
The tests at tests/integration/migration-test/migration_test.go will
not run any Forgejo migration when using the gitea-*.sql.gz files
because they do not contain a ForgejoVersion row which is interpreted
as a new Forgejo installation for which there is no need for migration.
Create a situation by which the ForgejoVersion table exists and has a
version of 0 in tests/integration/migration-test/forgejo-v1.19.0.*.sql.gz
thus ensuring all Forgejo migrations are run.
The forgejo*.sql.gz files do not have any Gitea related records, which
will be interpreted by the Gitea migrations as a new installation that
does not need any migration. As a consequence the migration tests run
when using forgejo-v1.19.0.*.sql.gz are exclusively about Forgejo
migrations.
(cherry picked from commit ec8003859c920ac05a071ad9b1d9d8af5a694ac0)
(cherry picked from commit 697570ff390656930d41bcdc4194aacc5c7a54f4)
(cherry picked from commit f041aec17265ca34943f961d9640e60c96c0f24d)
(cherry picked from commit 60463e3bab9dfa6aae7f379fc77309ab52b1d250)
(cherry picked from commit b2fc2a7c1338ad2a9bd0a6887443e604dccda53f)
(cherry picked from commit fb2759b6afc213d5e2db8f6e523391927c611b23)
(cherry picked from commit 37cfc3b2275afd523f53e149781d69a2914fd83b)
(cherry picked from commit 832607500a576a40ee1e35897e58ef319dba9788)
(cherry picked from commit 143d4007b1b60ad1880b64ce1d4998e77854a05a)
(cherry picked from commit a17e803fbfb7908729c2d92fd58360806cce6fbe)
(cherry picked from commit 72ffd49bc3c218acf8c87f7464f2c028860adba8)
(cherry picked from commit 9b92a5fd725b34d7ed18b5f1ebc78e1a45de07eb)
(cherry picked from commit 0a334d0a9b02617360aaa76d55dbb0f6fd5547f4)
(cherry picked from commit 3add683c9411018f735c0a19827354870310b9c8)
(cherry picked from commit 8ed3f3f86b0ddab8fc6adc0557b3f5d5e3b8ed4a)
(cherry picked from commit 97dc65852b215d85c8608033bd4180d91aef1a54)
(cherry picked from commit e0503cbfead8e5f7f48d0eb0f32bd6881437bb9b)
(cherry picked from commit f25e6a196b32dcb500fa7df65f21124e5e6a10c4)
(cherry picked from commit cca19c7a4e35982c5fec4de4fcb53690f22d1212)
(cherry picked from commit 2c89d7f18c9493e720e0d06c4b2cd072445eff47)
(cherry picked from commit 4eb8695c40e5d1c64113ce19bb3deae1eafe64c9)
(cherry picked from commit e4c42a68ffccb83fcd7379baa402daae15d6f57b)
(cherry picked from commit f76d5e0a820fbce8c7be968d8318a5a543e43e85)
(cherry picked from commit c6e5a2962cae3eee0b39469bcf39396ee6efddcd)
(cherry picked from commit f9927a2253263110b60c4a49771bf72f660b3ad5)
It does not pollute the output because they go to sqlite-log/gitea.log
and it may provide clues for debugging. When trying to figure out a
problem in production, Debug is likely to be used but in a development
environment a very fine grain log is the most useful. If that's really
too much noise, the lines can be trimmed by removing all those with [T].
(cherry picked from commit 666b02eb9d6e50b3a8d3ec5659fa6fb8451d0d9f)
(cherry picked from commit b69e4d30581258d82d9b2a4daf932f75d7d7171e)
(cherry picked from commit 0c1aecd7ec0d3bf9801c02ae24c89dd5ce074255)
(cherry picked from commit 0304e41345e8ab19537d3686b5487c8cb4b280c2)
(cherry picked from commit 4bcc7e02ce496bea54de39d1059cf39617d2a8d9)
(cherry picked from commit 98364235f2792ce058984c03dde2f609adfbfc88)
(cherry picked from commit ca465e97c1b5d1db684cf9fa1ecbaa14f4bb077c)
(cherry picked from commit 653045ade1e2423ce363ffd2682c1f5cadf8059f)
(cherry picked from commit 9ca2e644ab28c867a92925a6eb83ecbb6805434f)
(cherry picked from commit 47c8a05b37d17201b24bab2d211d672e1fd6c2e0)
(cherry picked from commit 4235d929ed1cb03e96c4f117a33b3120372235e0)
(cherry picked from commit 10541c4b1c61ce6dc8c56481c0999e6ed52dbc80)
(cherry picked from commit c1a0e1eb2f7673de83a57295531675c1ffbcdc8e)
(cherry picked from commit 1c20bf30b2e9d1be68c6b2175fe33965a6bf761c)
(cherry picked from commit d4b372db3108a350492d8dd8842cd6c98e7d3cdc)
(cherry picked from commit fe3e43429979d8a9518861a5d795204038ee1f41)
(cherry picked from commit d2b544847f0c4418f92c1bb657c88900ccbf3f82)
(cherry picked from commit 059f067a98b9faedfa7c5ed7e764faa350236ed5)
(cherry picked from commit 72ad3d7d7e1fdc7132418e0051f76df617dffad7)
(cherry picked from commit 6037e9a273162ae9d478bf844cc0b6145c334a77)
(cherry picked from commit d63aee6921aa061d61169e00f4cdf7a693066724)
(cherry picked from commit 7a0d05f802cf48fbb1cedbe2dd7095b4c35a8df2)
(cherry picked from commit 9b9965b269a84b25b20aa1dc2b1e076e55136edd)
(cherry picked from commit 5ca35d9753c382c700bf20327c721fb3854f694f)
(cherry picked from commit 9b003f0a0ebd62752daacb72512bb6c92bc6e404)
(cherry picked from commit d3769a6cdc1a37457683f3f761bb52f78b699ead)
(cherry picked from commit b84f38e71c7a6994debef8962d3a8d69b0fb0957)
(cherry picked from commit 85e687e551d4e7947627fb3a6bc22c0bcdae23e4)
(cherry picked from commit f8e1619b993943eafb8ee12bf06f4cdb5862de70)
(cherry picked from commit 46d8bc9bdf68b53767211dc103e6130f55bcdb64)
(cherry picked from commit e0c7b7055f5f4eeca84f1d0b1260b7b9622d3aab)
(cherry picked from commit faab747f8e7eb09262f755445462a77f8a6fb953)
(cherry picked from commit 46acb6a9a79e7ce588b2863aa37bf26805afb2b1)
(cherry picked from commit 22d964e74407c52ffcd3d3a84b0a66e2c186b0fa)
(cherry picked from commit 4c8a6031acf760c2383d9e103c703ee5ececb8e8)
(cherry picked from commit 032e8c7a9a357a13f41410063c2f7fb925dba5ac)
(cherry picked from commit 7a17a3b0fb979e2923019de4b9a7318f578b73b8)
(cherry picked from commit 8ea71c2a31ea7492f5f2e3de529c7fd0b232d3e3)
(cherry picked from commit 4b027e2d37cb91c5951f1d10a018778b19590eb0)
(cherry picked from commit d787089a5de09fa11f8e82a66ec43e4abdde1b2e)
(cherry picked from commit 7b9999357a5d34861b5fd7390cc400f497896246)
(cherry picked from commit 80eb531c380914c66d30a29159b81154e7adefeb)
(cherry picked from commit 373b198bfbc29855c409294ee487639f83516a55)
(cherry picked from commit 15781eedf755713ad4bbc83cf0b82e899e05d075)
(cherry picked from commit 46bdb17a2fb25c23336ef493449ff3ff0eb05409)
(cherry picked from commit 22ec6c11ee779cc06c2e6e6dca3213129033389e)
(cherry picked from commit 3f94b9a11103458d6b4f44dfda8158b748a2e3ad)
(cherry picked from commit a4194c29ffcca46f20d2ccc660f8c95cf527c7a4)
(cherry picked from commit aa80ba2ed1e529a85eda01beeb25c6732d2bc9bf)
(cherry picked from commit d349f3e80ec764f6f402ea6183e41511f73cd33f)
(cherry picked from commit ccb073f71ac855b1d7c7dd1e71a29939a14a20c5)
(cherry picked from commit d8a996a9c1052a7c4b7693cb75f10ee0cbce1534)
(cherry picked from commit af12965737bf60bb74fed2ca5363b034eca15fe4)
(cherry picked from commit 3867b17a485e441198b248be08cbe14bb8bd3946)
(cherry picked from commit 0c48072b2e19f70530d76de459bddd9e7c539c0d)
(cherry picked from commit 9c5d675ded22eb2777df5b4bbd24e4b1341b8b26)
(cherry picked from commit 665119370f4e9103978853c53c6ae9258a415cbc)
(cherry picked from commit 658417e7ad06e8a03ee562f3c8ef8b3c2abd158e)
(cherry picked from commit e11dcc60f291f1b882a993f60f8381fe4561d6d0)
use backticks to avoid backslash
(cherry picked from commit 34212791eef2031ef09ea118a2ee5b98082174dc)
(cherry picked from commit bde9473c69eaf6306457b4218d9704af64cb6cc8)
(cherry picked from commit d4deb43084eec4ce0de786a01acef52921a39b13)
(cherry picked from commit 08e91649b0057258ea5d775447d84093c31ad523)
(cherry picked from commit 2b988e5415b35e608726facb5d23a920334fda1c)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066bee46ca15ce66d0deb7ef3e89915248)
(cherry picked from commit 841d1b50731a94b9330b6a623a40f8aa0a6befa8)
(cherry picked from commit 35da630ad884a9ffff5bd873123687af169a6cac)
(cherry picked from commit caf2dc4fa7c6fb45a19edc5a025579d42d8db455)
(cherry picked from commit 6eb81e67ba69aeb9f1290f6717ec6c6a367752c3)
(cherry picked from commit d59757239f4fd6353dafd88f2460145b88ef38a1)
(cherry picked from commit 38a121b6880538f381799fb69666e13abf667502)
(cherry picked from commit 20613874ee04286a5ecb28045ec80af0fd850582)
(cherry picked from commit 6d2705e10858baf5e33df0ced047c544ed826fd3)
(cherry picked from commit f177b728142911fed6709339dd0e686017b610b0)
(cherry picked from commit 75e1fc4c8318b378f94065a268b079ac152657ef)
(cherry picked from commit ba64fa9867b06fb0b390a799ef4c3f39f554bb0b)
(cherry picked from commit 0b8ab0893ec6b6d689534b5e4ac50cdfe36c34e9)
(cherry picked from commit 1419d11435b0cdf7c41cb7175dffaf521ecfacd7)
(cherry picked from commit 38766847e0441f4b3841b05b34e3442f4e23af06)
(cherry picked from commit 6f23426a6ab09df7bb5817d364301975715dc10b)
(cherry picked from commit 9e0ff9ca54505723ad39a3fb221b94cbcef2da66)
(cherry picked from commit 353f3601c318f77a07fba0976fc9e3d28b2fc818)
(cherry picked from commit 6e4ae401d815bf32ca21e2fdada5aa1ac528c756)
(cherry picked from commit 1a7afe41530378cf194ce7c302cfe6bf757a2838)
(cherry picked from commit f9f3e0cc02fda87ef769ee8410e9d926963d2d97)
(cherry picked from commit 22fd0337f3cc57e4365c783b80db553627022f6d)
(cherry picked from commit ee57e138d1a89508f7613d1e6782a9909977b153)
(cherry picked from commit 21f9b7e73ddf12948feb220ec5432e14b75e0baa)
(cherry picked from commit 17c548c09298472af65526f1334fecffd1e72d1e)
(cherry picked from commit 02d31865174d94273e993248aa152f482fa14802)
(cherry picked from commit f02a040fa27afdbcf12d197894e9adc0a8a17734)
(cherry picked from commit 3cf9f82b282fe62d2124e1d3c1d75ea5f92ddce0)
(cherry picked from commit aa9d06dbac2a14cde066f0c1f896c3993a49aae0)
(cherry picked from commit 689421315464c16462938b3dbd710978e1fd14f3)
(cherry picked from commit c1d14c5fffeb823385b2984cfcdb3e195bfb151d)
(cherry picked from commit e0e8aabc985af153cf1fcb2064c17f68ec37f3a2)
(cherry picked from commit 392a415070af7f4e872c7bb013f259e2dcc8b7b4)
(cherry picked from commit c7cf1307ca227ff9f4935391582c058823419d7b)
(cherry picked from commit 93b13d092b46c261fc3c0f70ecd9d4f45ee84029)
[TESTS] createUser via the user model helper for integration tests (squash)
(cherry picked from commit 6ff23839528db66ae91e88d6b687b63c769f8f43)
(cherry picked from commit de2a6fe8c374965d50bcd6421d44c3a5d312a689)
(cherry picked from commit 398a6ab072e8364db3c5236bf258ec6bb068dc29)
(cherry picked from commit 16abc89780a228fdc288ed2ce44a95daa6368e36)
(cherry picked from commit 312a3ec5d9d50864af9dbfb8672778789b2e11ca)
(cherry picked from commit 85c6d8e29065641ccbaf57fcebe72b93141a14a4)
(cherry picked from commit 79150d30a4d9a91e9e5272f3d46bd0ee836bcab1)
(cherry picked from commit 436137962d3f150d4c28093461c30c9910f2d32d)
(cherry picked from commit e4eb8d471e8e1c8e14a6a3208418bde0b121472c)
(cherry picked from commit a7257052f49a480dd2ccfbef5c0573c9b5b73adb)
(cherry picked from commit d5eba9a6dd93eb21350dc611edff7c9a13cb2552)
(cherry picked from commit d89ef2ffa9a83249b498867a02996a3dcb17aa31)
(cherry picked from commit f1d25aa30762ae97d7994048dd03c656028dedbe)
(cherry picked from commit 60c7c0735376d7987717c0d375fa409ca9b90e8f)
(cherry picked from commit cfeff3afdb80785019f53312369953e2d996de89)
(cherry picked from commit 608ac6bd683d60fe295163ba5562aee5037b6e01)
(cherry picked from commit c64e530a13fe4afc89ad3de481fff16fe190c3d1)
(cherry picked from commit 513db02971fa98ff88f9b06bf25b03c31d0a857c)
(cherry picked from commit 43eaaa5a61134928ff9a83e571552407450d0a09)
(cherry picked from commit 678eb494408e3784336a3aeb5e5f54bd738d009e)
(cherry picked from commit f7458dabda74dedecb431a75e9f049e545fc973e)
(cherry picked from commit 32568e43b412bf53bc207f5b429ee4ef77693857)
(cherry picked from commit 3fcbb2043d04fb701a7baa26cc599c98dfaa5601)
(cherry picked from commit 95f0b8eefad590c647951f42bd0f467685901bd2)
(cherry picked from commit f285b9469d0b644abc70ebbc79c4b14fe5a03e56)
(cherry picked from commit 4b8a02ad088bc925dee1b2f0b759ea9ef77d96e8)
(cherry picked from commit 70eb98025b6012f42c0161999f7675f069bde877)
(cherry picked from commit dc2d448705404872c7f67887f7cf80658e42c3fa)
(cherry picked from commit e1402ca319f549f8ed36a9f8b58f7aba09793415)
(cherry picked from commit 807d587285c06b82d636fba371f946c68f0a22e3)
(cherry picked from commit 20b56692693e054bb3c04b4ef12b29b0715b4530)
(cherry picked from commit 1574643a6a9634e5b92c033a4bfb69062a86bd05)
Update semantic version according to specification
(cherry picked from commit 22510f41306f9c133a7e99b61f9c38dabfd4b810)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409f1bb18a45659a167cf1ffee057f3b6)
(cherry picked from commit 5ea23098513c068444226af41faf9be9c4c998e6)
(cherry picked from commit ec5217b9d1b94bb04e34ce8c27eecbdc6f3a247a)
(cherry picked from commit 14f08e364b2ad7e3176b45d3ec8da5f5605b4315)
(cherry picked from commit b4465c67b8737aed9fd79a43046aa3795a298e68)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e64977a75e77c9c6cf8e3f8a679a5e7b733)
(cherry picked from commit 532ec5d8782703b62d7d02312764e50637cd016e)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f4291cf4c62df42cbd12a00638f3cdc70)
(cherry picked from commit 1d928c3ab2e1fda6082e1400d89ea96d6605ebaa)
(cherry picked from commit a39dc804cd1da86444ed709455857f069475e7db)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3eb41215338125edfca91804706f8a1)
(cherry picked from commit 9b8d98475fd7efcc15bf0d91b0af6ef3aff64508)
(cherry picked from commit 25161039745a63282257eded9616390241af8013)
(cherry picked from commit 18e6287963a0e1863cd08fd514a4e732a1904a68)
(cherry picked from commit e9694e67ab93ad74f7eae3152d88d95e8493e739)
(cherry picked from commit a9763edaf002c8009a2cca4115cb8b926f8cdc85)
(cherry picked from commit e2b550f4fba144f9637a212b56bfe30cac1adb3b)
(cherry picked from commit 2edac36701e8fa1ff67f87dccfa34cfc00ab66de)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3c6eee19a7ad7bc956b71c6e937c04c)
(cherry picked from commit 578ccfdd27d7a280050bdf61d497d07decf98f2f)
(cherry picked from commit 1bf6ac09520490f0a56b9b55d7836c2d8ea5d22c)
(cherry picked from commit 2fe16b2bfed62c0386d0bfe104f7dcc621d1c3be)
(cherry picked from commit 7cd9d027eec5a2b328d06a47f34545943560fe1b)
(cherry picked from commit eaed4be2ae88055a15dcc96564440c301a13ba8e)
(cherry picked from commit cc94f3115f844a0f16064e49e5eb719d33bc4441)
(cherry picked from commit d7a77e35ccfd2d0fc2ba98932296ab7354edd2db)
(cherry picked from commit cd8eb68ab7b3e2eaacf78d370c762f43cc19fd6a)
(cherry picked from commit 68487ac95f742837e7ff38df902834b6173cd9ab)
(cherry picked from commit 616dceb565456d6fac6f58b1c4de43e9d3254090)
(cherry picked from commit 545fe5975b47d2eab348a57b87c6fd4590f33442)
(cherry picked from commit c042cf8eda2dea805138bd64daa7fbe07865ed5a)
(cherry picked from commit ae5e5a7468aa66312055a26841f658574a9b0dd7)
(cherry picked from commit 8034ef5fa2648a127f8c84c572bec02a1ff6bb9f)
(cherry picked from commit aaf0293034468505449d33ab1483ae65b4175754)
(cherry picked from commit daafa8ce58e5e6077da585b13e5190856228a4a3)
(cherry picked from commit 7ca3681d3e2ed5ec1ae44364cba476d642e2b557)
(cherry picked from commit 39f72cba71ff3f9d2cbb05c88031b34933573a8c)
(cherry picked from commit 60a591713097384935ba0ac51a5cd4793f7544a8)
(cherry picked from commit 4853bd9e16bc8986ba8159349e93bc3093dc8ab9)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d251bfa18c677b30bc7da80856d919fb)
(cherry picked from commit 11ae7f6e85395b287c6f4108c531aa1a81fd964c)
(cherry picked from commit 25e96cfcb28859406329090eb0c7990bea4e73eb)
(cherry picked from commit 6d8d19b39156a7f8b4db5022915590593df94f1f)
(cherry picked from commit 5afc5c454b7d70f95b83e6c3b4c9e2cb6e2d0ef5)
(cherry picked from commit 86d07b4c249211bdb77c0520f99f2c8e5d89b516)
(cherry picked from commit e54d869fdae44811faaa80f3757efbc93bf0bce4)
(cherry picked from commit ab31ef1bba3bc5188e0f3ce5e5fa33335877cf47)
(cherry picked from commit 511cbca2f3799646edf8eae00464b87f43ca280f)
(cherry picked from commit 333916fea874509063f9449f07d79e4cafbcf06f)
(cherry picked from commit 3802bcd7c9865b77151ef454c0bdc2ce32157a41)
(cherry picked from commit 5d0fa034f77388ed21735a22cf1a2a23562245c3)
(cherry picked from commit d15627aa0dfb4ffc2eb7ab0ce99b7c5b2bf06dcf)
(cherry picked from commit ba0b21b9305b6fecf23aeec213f1a95d96ce72fb)
(cherry picked from commit 39ade66aac7f8cccd980d1f435b92465a50be032)
There is no need to specify it again. It is misleading, lets just not
do that.
(cherry picked from commit 19259fc6af633c20f50e840500e0ff653c4858aa)
(cherry picked from commit ca1a0256b40cb20c807166827f27bbe69c9bcbda)
(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e02461fb47fcc0901211668e4529fac68d0)
(cherry picked from commit 7749dbfe6684498a47e3037088e7bef3542b6ce5)
(cherry picked from commit 437924971136eaed795f77edd3d3dfffa5f68103)
(cherry picked from commit a69f55bebf82a0b68bc0f66bc029eaea836cddb7)
(cherry picked from commit 24dd5fbfdbc27c887dbc24661c1005fb2e14e3c6)
(cherry picked from commit dda856d6b83936fd1c96c84544b086cbd8f63115)
(cherry picked from commit bc14f4fa97fffe82d1c666e961e313f88433cb9e)
(cherry picked from commit 78fef4f1379d8854901151d4bc62135c73db868e)
(cherry picked from commit 69e013cc515e2a50006d8d02f575ff6490d272ff)
(cherry picked from commit f173c6a2734b2dccf1424d27cd8e10fc296e44a4)
(cherry picked from commit 92f9d02547017770deafd1f715c32ae4479b8ded)
(cherry picked from commit c99d51e665370ceb71b96b3fb65184090c7e4442)
(cherry picked from commit aa0650fd2b42738a5e564c229c3eb63b8ca77f9b)
(cherry picked from commit 0a8ef91302368751df22a1967857283222bc097f)
(cherry picked from commit 7b54fe01c2ded0bbbcae6b89d9e330ca4f6ab744)
(cherry picked from commit 0e154f366f14d106d14f500f605380c29b5a3f21)
(cherry picked from commit 02d88ee16d23b9ebb04bf1af843fc5d2074783ce)
(cherry picked from commit 411924e0172a7b10de7513f2e7f60ab5341b13e4)
(cherry picked from commit f4e9ca6db59f2c5c638a0560d4ea99833d61520b)
(cherry picked from commit cd80126a23573dd5aea1e9674ee0bfa34c63ec5a)
(cherry picked from commit da626702f9743fc6e1dd77d21aff5fc3afe75912)
(cherry picked from commit 4b81d0bd046fef267bb10d2ca0cbd342c87fd4e2)
(cherry picked from commit 53ac2606694fa060879a0f4c82f6164c6f42a4d0)
(cherry picked from commit 984081f08d108acc47d312307b1c3beee3058202)
(cherry picked from commit 1c39bae3ec9b485f9969e29ed7ae8fe37b32da69)
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Git 2.43.0 will not detect a git repository as valid without refs/
subdirectory present. `git gc` cleans this up and puts it in
packed-refs. We must keep refs/ non-empty.
Fix `Uploaded artifacts should be overwritten`
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Gitea prefers to use relative URLs in code (to make multiple domain work
for some users)
So it needs to use `toAbsoluteUrl` to generate a full URL when click
"Reference in New Issues"
And add some comments in the test code
In #26851, it assumed that `Commit` always exists when
`PageIsDiff==true`.
But for a 404 page, the `Commit` doesn't exist, so the following code
would cause panic because nil value can't be passed as string parameter
to `IsMultilineCommitMessage(string)` (or the StringUtils.Cut in later
PRs)
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
#28361 introduced `syncBranchToDB` in `CreateNewBranchFromCommit`. This
PR will revert the change because it's unnecessary. Every push will
already be checked by `syncBranchToDB`.
This PR also created a test to ensure it's right.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa24390116d31ae2507c0a93d423f690b7b)
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds unit tests
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac1408ece6b7d9fe6a76501ed9a45d06fa)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
They currently throw a Internal Server Error when you use them without a
token. Now they correctly return a `token is required` error.
This is no security issue. If you use this endpoints with a token that
don't have the correct permission, you get the correct error. This is
not affected by this PR.
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
</details>
Partially resolves#25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fixes: #26333.
Previously, this endpoint only updates the `StatusCheckContexts` field
when `EnableStatusCheck==true`, which makes it impossible to clear the
array otherwise.
This patch uses slice `nil`-ness to decide whether to update the list of
checks. The field is ignored when either the client explicitly passes in
a null, or just omits the field from the json ([which causes
`json.Unmarshal` to leave the struct field
unchanged](https://go.dev/play/p/Z2XHOILuB1Q)). I think this is a better
measure of intent than whether the `EnableStatusCheck` flag was set,
because it matches the semantics of other field types.
Also adds a test case. I noticed that [`testAPIEditBranchProtection`
only checks the branch
name](c1c83dbaec/tests/integration/api_branch_test.go (L68))
and no other fields, so I added some extra `GET` calls and specific
checks to make sure the fields are changing properly.
I added those checks the existing integration test; is that the right
place for it?
Fixes#25564Fixes#23191
- Api v2 search endpoint should return only the latest version matching
the query
- Api v3 search endpoint should return `take` packages not package
versions
I kept sending pull requests that consisted of one-line changes. It's
time to
settle this once and for all. (Maybe.)
- Explain Gitea behavior and the consequences of each
setting better, so that the user does not have to consult
the docs.
- Do not use different spellings of identical terms
interchangeably, e.g. `e-mail` and `email`.
- Use more conventional terms to describe the same things,
e.g. `Confirm Password` instead of `Re-Type Password`.
- Introduces additional clarification for Mirror Settings
- Small adjustments in test
- This is a cry for help.
- Grammar and spelling consistencies for en-US locale
(e.g. cancelled -> canceled)
- Introduce tooltip improvements.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- The permalink and 'Reference in New issue' URL of an renderable file
(those where you can see the source and a rendered version of it, such
as markdown) doesn't contain `?display=source`. This leads the issue
that the URL doesn't have any effect, as by default the rendered version
is shown and thus not the source.
- Add `?display=source` to the permalink URL and to 'Reference in New
Issue' if it's renderable file.
- Add integration testing.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1088
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
---------
Co-authored-by: silverwind <me@silverwind.io>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
- `setting.UI.Notification.EventSourceUpdateTime` is by default 10
seconds, which adds an 10 second delay before the test succeeds.
- Lower the interval to reduce it to at most 3 second delay (the code
only send events when they are at least 2 seconds old).
(cherry picked from commit 3adb9ae6009ff3ddebaed4875e086343f668ef7b)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1166
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
The PKCE flow according to [RFC
7636](https://datatracker.ietf.org/doc/html/rfc7636) allows for secure
authorization without the requirement to provide a client secret for the
OAuth app.
It is implemented in Gitea since #5378 (v1.8.0), however without being
able to omit client secret.
Since #21316 Gitea supports setting client type at OAuth app
registration.
As public clients are already forced to use PKCE since #21316, in this
PR the client secret check is being skipped if a public client is
detected. As Gitea seems to implement PKCE authorization correctly
according to the spec, this would allow for PKCE flow without providing
a client secret.
Also add some docs for it, please check language as I'm not a native
English speaker.
Closes#17107Closes#25047
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
Earl Warren
