If a documentation file is marked with a `linguist-documentation=false`
attribute, include it in language stats.
However, make sure that we do *not* include documentation languages as
fallback.
Added a new test case to exercise the formerly buggy behaviour.
Problem discovered while reviewing @KN4CK3R's tests from gitea#29267.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves#2455
For small, personal self-hosted instances with no user signups, the fork
button is just a noise. This patch allows disabling them like stars can
be disabled too.
Disabling forks does not only remove the buttons from the web UI, it
also disables the routes that could be used to create forks.
Fixes#2441.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Check if someone is (accidentally) trying to create a pull request via
AGit with changes already in the target branch and fail if that is the
case.
- Added integration test.
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
Adds a very bare-bones test for artifact deletion. It does not exercise
the functionality itself, just the presence of the functionality.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
It's possible for reviews to not be assiocated with users, when they
were migrated from another forge instance. In the migration code,
there's no sanitization check for author names, so they could contain
HTML tags and thus needs to be properely escaped.
On the wiki and revisions page, information is shown about the last
commit that modified that wiki page. This includes the time it was last
edited and by whom. Verify it is sanitized.
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
TLDR: Less code, better maintainability and more comments.
- Add code comments to explain what the code does, it's quite a big
function so it definitely deserved some of that.
- Simplify some logic.
- Load the `pusher` in a single place.
- Update the error messages to be more correct, not capitlized, include
more debug info and remove 'Error:' As it's no need to indicate that,
errors are concenated with `:` seperators.
- Improve the message that a change was rejected, because a force push
was detected and the `force-push` option wasn't set.
- Avoid a second time loading `gitRepo.GetObjectFormat` and handle the
error gracefully for the other occurence.
- Adds integration test for force push detection.
2 instances of `for` with a wrong value and 1 `for` that had a reference
to a `name` instead of `id`.
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 1d275c1748a75a01c270f5c306c5248808016aba)
This adds a few test cases to exercise the alert block feature of the
markdown renderer, both the legacy GitHub style, and the modern one.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves#2321
Rename `repo_lang_stats_test.go` to `linguist_test.go`, and add a new
tests that exercises parts of the web UI to ensure that language
overrides in `.gitattributes` work when viewing a file source, and in
the blame view too.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The issue filter links should not be crawled by search engines, because
they they only filter results, and contain nothing new, yet, they put a
considerable load on the server.
To stop - well behaving - search engines from following these links, add
a `rel="nofollow"` property to them. The same property is already
present on the archive download links, and plenty of other places.
Fixes#2361.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
If no `-o description=` is provided, fill it in automatically from the
first commit, just like title. Also allow filling in either, and
specifying them independently.
This means that `git push origin HEAD:refs/for/main/my-local-branch`
will fill in the PR title, *and* the description, without having to
specify additional parameters.
The description is the first commit's message without the first two
lines (the title and a newline, as customary).
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Fixes#2173
~~Still requires a bit of work to do, I'm not 100% happy with this solution.~~
The idea is to copy the noarch package to the architectures available in the package repository.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2285
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
Co-committed-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
Skip a HookEventPullRequestSync event if it has the same CommitSHA as an existing HookEventPullRequest event in the ActionRun table. A HookEventPullRequestSync event must only create an ActionRun if the CommitSHA is different from what it was when the PR was open.
This guards against a race that can happen when the following is done in parallel:
* A commit C is pushed to a repo on branch B
* A pull request with head on branch B
it is then possible that the pull request is created first, successfully. The commit that was just pushed is not known yet but the PR only references the repository and the B branch so it is fine.
A HookEventPullRequest event is sent to the notification queue but not processed immediately.
The commit C is pushed and processed successfully. Since the PR already exists and has a head that matches the branch, the head of the PR is updated with the commit C and a HookEventPullRequestSync event is sent to the notification queue.
The HookEventPullRequest event is processed and since the head of the PR was updated to be commit C, an ActionRun with CommitSHA C is created.
The HookEventPullRequestSync event is then processed and also has a CommitSHA equal to C.
Refs: https://codeberg.org/forgejo/forgejo/issues/2009
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2314
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes#2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This adds a few tests for the previous change, to verify that issue
template configs, issue templates and pr templates are all recognized in
`.forgejo` directories.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When issue templates were moved into services in
def4956122, the code was also refactored
and simplified. Unfortunately, that simplification broke the
`/api/v1/{owner}/{repo}/issue_templates` route, because it was
previously using a helper function that ignored invalid templates, and
after the refactor, the function it called *always* returned non-nil as
the second return value. This, in turn, results in the aforementioned
end point always returning an internal server error.
This change restores the previous behaviour of ignoring invalid files
returned by `issue.GetTemplatesFromDefaultBranch`, and adds a few test
cases to exercise the endpoint.
Other users of `GetTemplatesFromDefaultBranch` already ignore the second
return value, or handle it correctly, so no changes are necessary there.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
* Split TestPullRequest out of AddTestPullRequestTask
* Before scheduling the task, AddTestPullRequestTask stores the max
index of the repository
* When the task runs, it does not take into account pull requests that
have an index higher than the recorded max index
When AddTestPullRequestTask is called with isSync == true, it is the
direct consequence of a new commit being pushed. Forgejo knows nothing
of this new commit yet. If a PR is created later and its head
references the new commit, it will have an index that is higher and
must not be taken into account. It would be acting and triggering a
notification for a PR based on an event that happened before it
existed.
Refs: https://codeberg.org/forgejo/forgejo/issues/2009
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2236
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
(cherry picked from commit b3be895a30b32bfae4acfa32db54406e1dd1dc21)
The "Self Check" menu essentially runs the collation check that is also
performed at startup, and displays the results. This is only a thing for
MariaDB/MySQL and MSSQL. As such, the menu item should only be available
for these database types.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 0ca118fdc3c39c0e7adf9285e074e5878a0ca1c1)
Because Forgejo run mysqld with `--innodb-flush-method=nosync` to speed
up the test suite, there are situations where a larger, database-wide
operation does not always fully manifest until later, not even when it
is wrapped in a transaction, nor when we use `FLUSH TABLES` and similar
methods.
In the case of the MySQL collation test, this *sometimes* results in the
database still responding with the old collation to a reader, even after
an `ALTER DATABASE ... COLLATE ...`.
In order to be able to still use the aforementioned flag and enjoy its
benefits, add a five second sleep between `db.ConvertDatabaseTable()`
and `db.CheckCollations()` in the `TestDatabaseCollation()` set of
tests.
This is not a fix - I don't think there is one possible -, but a
workaround. If it breaks again, the correct fix will be to remove the
flag from `mysqld` (it's not a supported flag to begin with).
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit af18ed2ba9b1d6e228854b76cc4ffff790b8804b)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a313fa45093ab49b78bb30322b33298)
- When a commit references a pull request, the detail strings should
reflect that. Add a new translation string for the pull request.
- Added integration tests.
- Resolves#2256
(cherry picked from commit 0d054cd4d998957bd499bfebe4002290526c5b92)
These tests originate from Gitea, so may cause conflicts in the longer
run. But they use the same pattern, so transitioning them to the helper
is hopefully a benefit that offsets the risk.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2d475af49484bd428018e479fa35643f61a30426)
(cherry picked from commit a99c17729c635398d3722da9da7d9cbe2b47c533)
There are a number of tests which require creating a repository on the
fly, and they each do it their own way. To reduce code duplication, lift
out this common pattern into a helper called `CreateDeclarativeRepo()`,
which lets us create a repository, set up enabled and disabled repo
units, and even add, delete, or update files.
Also convert a number of users of this pattern to the new helper - those
users that I introduced, and are in code introduced by Forgejo in the
first place.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 342b7bae3c85ebf36a625ba36d0a8c1ad822f794)
(cherry picked from commit 2ece8764e9929ed8d9ace7f7ba56d1c914369913)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4c28c3027feaea73561045264f1f591)
(cherry picked from commit 2d3c81d4f2676c58e026e5a06cfc8d84ad0d48fa)
(cherry picked from commit 624a61b3b8660d53fc66f8ab3a1b0bff7a9fcb6c)
When comparing branches, only offer those branches to use as a base
where the repository allows pull requests. Those that do not allow pull
request would result in a 404, so offering them as an option would be
misleading.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2194
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 022d0e0d71a92c31302176c5c8ba1e7169bbbf3e)
(cherry picked from commit 957990b36a25d0e51d9b75432a577dd63fb6dad2)
(cherry picked from commit 6d2df728257922cc716fed8a172ed69adc8d46d3)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d59f6c33c5cfbee723f03f981aa6b72)
(cherry picked from commit 70c5e2021d7c385b9285622f0b2d878d3807d33c)
(cherry picked from commit 48b25be67a94f739601fbfea951ade6cdfe30691)
- Document the correct content types for Git archives. Add code that
actually sets the correct application type for `.zip` and `.tar.gz`.
- When an action (POST/PUT/DELETE method) was successful, an 204 status
code should be returned instead of status code 200.
- Add and adjust integration testing.
- Resolves#2180
- Resolves#2181
(cherry picked from commit 6c8c4512b530e966557a5584efbbb757638b3429)
(cherry picked from commit 3f74bcb14df99ee75a170813979beb5ce04c8027)
(cherry picked from commit 6ed9057fd76b2d5d0dfdb3c663367ae861ab8093)
* reuse deleteIssueComment by adding the commentType parameter
* ensure tests start with a PR with no random reviews from fixtures
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 5b90ab77f67e4c0ac17d8b1101453d7790fa45d2)
(cherry picked from commit 28ecd6f5a67891788ad4d989311050df55deb008)
(cherry picked from commit 24870cf133153f0fdefb76df58fe074ae6aef7c0)
Recognise the `linguist-documentation` and `linguist-detectable`
attributes in `.gitattributes` files, and use them in
`GetLanguageStats()` to make a decision whether to include a particular
file in the stats or not.
This allows one more control over which files in their repositories
contribute toward the language statistics, so that for a project that is
mostly documentation, the language stats can reflect that.
Fixes#1672.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 6d4e02fe5f2e79fceb6cf672f6f822714db6d0fe)
(cherry picked from commit ee1ead81891d7a0d4e62e5ba89ebee9db6359e76)
(cherry picked from commit 2dbec730e875f44a1d8a53e123fef428a14add95)
When searching for repository topics, either via the API, or via
Explore, paging did not work correctly, because it only applied when the
`page` parameter was non-zero. Paging should have applied when the page
size is greater than zero, which is what this patch does.
As a result, both the API, and the Explore endpoint will return paged
results (30 by default). As such, when managing topics on the frontend,
the offered completions will also be limited to a pageful of results,
based on what the user has already typed.
This drastically reduces the amount of traffic, and also the number of
the topics to choose from, and thus, the rendering time too.
The topics will be returned by popularity, with most used topics first.
A single page will contain `[api].DEFAULT_PAGING_NUM` (30 by default)
items that match the query. That's plenty to choose from.
Fixes#132.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 64d4ff41dbab7b3b84571b595158c3b451f53af7)
(cherry picked from commit 06b808fa2c0ddd52ca4569157892a0c7fc154b1f)
(cherry picked from commit 9205c9266a7d2b058100d03f5f3272f670f35866)
(cherry picked from commit 47863d4f724e7d2465acd6fca91e98157c60a29b)
services: in loadOneBranch, return if CountDivergingCommits fail
If we can't count the number of diverging commits for one reason or
another (such as the branch being in the database, but missing from
disk), rather than logging an error and continuing into a crash (because
`divergence` will be nil), return an error instead.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 8266105f24eb76b1dfb4c79d9bfde2ef9a98417a)
services: Gracefully handle missing branches
When loading branches, if loading one fails, log an error, and ignore
the branch, rather than returning and causing an internal server error.
Ideally, we would only ignore the error if it was caused by a missing
branch, and do it silently, like the respective API endpoint does.
However, veryfing that at this place is not very practical, so for the
time being, ignore any and all branch loading errors.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e552a8fd629b11503569f605c824c1c0b01eeab2)
tests: Add a testcase for missing branches
This tests the scenario reported in Codeberg/Community#1408: a branch
that is recorded in the database, but missing on disk was causing
internal server errors. With recent changes, that is no longer the case,
the error is logged and then ignored.
This test case tests this behaviour, that the repo's branches page on
the web UI functions even if the git branch is missing.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e20eb7b3853e25ab29d4ca63b015517b44e4954f)
tests: More testing in TestDatabaseMissingABranch
In the `TestDatabaseMissingABranch` testcase, make sure that the
branches are in sync between the db and git before deleting a branch via
git, then compare the branch count from the web UI, making sure that it
returns an out-of-sync value first, and the correct one after another
sync.
This is currently tested by scraping the UI, and relies on the fact that
the branch counter is out of date before syncing. If that issue gets
resolved, we'll have to adjust the test to verify the sync another way.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 8c2ccfcecec6182dd80d463f58223acbf16b039b)
(cherry picked from commit 439fadf5635c47c2a1be9cc83614b60f76ac05d0)
(cherry picked from commit 44dd80552ca63c6d22f4a139a0297486f1a2e655)
(cherry picked from commit 37b91fe6f2f05feee0f8db8f44c3eaf1ff060af9)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc608e9a9e79ead094a20a7775c4f9559)
(cherry picked from commit 30d168bcc867387f3c94582a4668cce62f77c171)
(cherry picked from commit 19be82b7ef11fe6e0656434dcc69c9ff2f24c702)
(cherry picked from commit 334b703b17a3fbb02e5ad20aea7241a909eb1f13)
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 8b4ba3dce7fc99fa328444ef27383dccca49c237)
(cherry picked from commit 196edea0f972a9a027c4cacb9df36330cf676d2f)
[GITEA] POST /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments (squash) do not implicitly create a review
If a comment already exists in a review, the comment is added. If it
is the first comment added to a review, it will implicitly create a
new review instead of adding to the existing one.
The pull_service.CreateCodeComment function is responsibe for this
behavior and it will defer to createCodeComment once the review is
determined, either because it was found or because it was created.
Rename createCodeComment into CreateCodeCommentKnownReviewID to expose
it and change the API endpoint to use it instead. Since the review is
provided by the user and verified to exist already, there is no need
for the logic implemented by CreateCodeComment.
The tests are modified to remove the initial comment from the fixture
because it was creating the false positive. I was verified to fail
without this fix.
(cherry picked from commit 6a555996dca6ba71c65818e14ab0eeafa1af6dc2)
(cherry picked from commit b173a0ccee6cc0dadf40ec55e5d88987314c1cc4)
(cherry picked from commit 838ab9740a6b022676103bcb3a7d168b501006e1)
Expose the repository flags feature over the API, so the flags can be
managed by a site administrator without using the web API.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit bac9f0225d47e159afa90e5bbea9562cbc860dae)
(cherry picked from commit e7f5c1ba141ac7f8c7834b5048d0ffd3ce50900b)
(cherry picked from commit 95d9fe19cf3ed5787855ac2a442d29104498aa36)
(cherry picked from commit 7fc51991e405ea8d44fd6b4b4de13ad65da63ae7)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce2228f8dd7ca105e94b9baa1be058ebe37)
(cherry picked from commit f09f6e029b4fb2714b86cd32dc19255078ecc0ee)
(cherry picked from commit 2f8b0414892f6099f519bda63a9e0fbc8ba6cfc7)
(cherry picked from commit d3186ee5f41fac896c7d2341402fcd39dd250bf1)
Files can have an RSS feed, but those only make sense when taken in the
context of a branch. There is no history to make a feed of on a tag or a
commit: they're static. Forgejo does not provide a feed for them for
this reason.
However, the file view on the web UI was offering a link to these
non-existent feeds. With this patch, it does that no longer, and only
provides a link when viewing the file in the context of a branch.
Fixes#2102.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b48d21ea7459539dfb1ca5cadd6f9cb99e65fc7)
(cherry picked from commit 70cb2667603bcdb9a8c9bb20c482877ab3f6de39)
(cherry picked from commit 69b45c3feaf92454853ef9b02c9d75092780dabf)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 639a2c07411e6c606dfb81f695fddbad73dca3da)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes#1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9d69becb9814ab0a8359555e80fcd4f)
(cherry picked from commit 2c0105ef17b9673e6892a66aa689af7c5c87b8a1)
(cherry picked from commit 3975a9f3aaf8ed3ceb5788abc325dbe8e89225d3)
(cherry picked from commit dee4a18423151ac7f22221e6fce12d863921c200)
(cherry picked from commit 60aee6370fb15b12fffc6f29582dd4a235f87d94)
- It's possible that `PageIsDiff` is set but not `Commit` resulting in a
NPE in the template. This can happen when the requested commit doesn't exist.
- Regression of c802c46a9b &
5743d7cb5b
- Added 'hacky' integration test.
(cherry picked from commit 8db2d5e4a76f05b34e4f889e7a00ecd6578d3639)
(cherry picked from commit 8c737a802bcae54195f1bb15bb0b8aca824ef395)
(cherry picked from commit 6b7c7d18dcdcfa135ff2657fbac8ce157eaf0dfa)
(cherry picked from commit a2be4fab27b98b2932486f2b03635b044742f964)
(cherry picked from commit a1125268aca2796d08e02b7a36bfb36172917b38)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes#126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212d8febd4bdfc27e61a4e13cbdd16d49)
(cherry picked from commit 20d14f784490a880c51ca0f0a6a5988a01887635)
(cherry picked from commit 4359741431bb39de4cf24de8b0cfb513f5233f55)
(cherry picked from commit 35cff45eb86177e750cd22e82a201880a5efe045)
(cherry picked from commit 2fc0d0b8a302d24177a00ab48b42ce083b52e506)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes#1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e546022e25f5c805ef047fbc3b7c6075ec0)
(cherry picked from commit 1868dec2e4c2ba8e6807336e6dabd83e6138bcac)
(cherry picked from commit c3a8e9887092c8c089462a1cdb22a404aa11beb6)
(cherry picked from commit 9266b1916f1577075b0bf2ff14c7412cbd7cae43)
(cherry picked from commit 8fa5ff65af91c33df692a52457fe65e71c4bc3c1)
- The transaction in combination with Git push was causing deadlocks if
you had the `push_update` queue set to `immediate`. This was the root
cause of slow integration tests in CI.
- Remove the sync branch code as this is already being done in the Git
post-receive hook.
- Add tests to proof the branch models are in sync even with this code
removed.
(cherry picked from commit 90110e1f44a40837a6ef5b3979a6ed96bfd614be)
(cherry picked from commit a064065cb9a6e39597e38c37a405d066cfabf7f7)
(cherry picked from commit 7713e558eb6419a3a7d3f2d1beaa8062899490c8)
Conflicts:
services/repository/branch.go
https://codeberg.org/forgejo/forgejo/pulls/2068
(cherry picked from commit 3bb73e0813b46fd8b518a46d7499ee1c525bc434)
(cherry picked from commit c557540926826e82a118a085c3b510e072157cfe)
(cherry picked from commit 986be6171a3a34ebab60e757dafeee2e254765a1)
(cherry picked from commit 7a343877f1051773e21e9af7bfff26ad03d43f08)
(cherry picked from commit 51425500f2c44d5ef4deb7a4fe7909645e0fb569)
Adds `[repository].DOWNLOAD_OR_CLONE_METHODS` (defaulting to
"download-zip,download-targz,download-bundle,vscode-clone"), which lets
an instance administrator override the additional clone methods
displayed on the repository home view.
This is purely display-only, the clone methods not listed here are still
available, unless disabled elsewhere. They're just not displayed.
Fixes#710.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2aadcf4946e48ee43800568fe705d00a062c42bf)
(cherry picked from commit 42ac34fbf9105eed27ee687b305a85515270f0cc)
(cherry picked from commit bd231b02450212aca6be775663c3d24ddf19f990)
(cherry picked from commit 3d3366dbbee37621fc665e557a4a87bf08104375)
(cherry picked from commit 0157fb9b88fd50832c07b06c11c8dba6e059a465)
(cherry picked from commit bee88f6a8309c6f9aeba1522383d77f08e5a4d2d)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
FixesCodeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b744399229f255eb124c22e3969715046043209)
(cherry picked from commit 337cf62c1094273ab61fbaab8e7fb41eb6e2e979)
(cherry picked from commit b6786fdb3246a3a455b59149943807c1f13a028a)
(cherry picked from commit a5d2829a1027afd593fd855a8e2d7d7cd38234b8)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72eaaa00ef1f4730f9b12a64a10b66113)
(cherry picked from commit 42c55e494e1018a210e54d405c15eec24a0b37c7)
(cherry picked from commit e3463bda47ffee4ab57efadfe5094f9401541cfd)
- When the user is not found in `reloadparam`, early return when the
user is not found to avoid calling `IsUserVisibleToViewer` which in turn
avoids causing a NPE.
- This fixes the case that a 500 error and 404 error is shown on the
same page.
- Add integration test for non-existant user RSS.
- Regression by c6366089df
(cherry picked from commit f0e06962786ef8c417b0c6f07940c1909d3b91ba)
(cherry picked from commit 75d806690875a4fc38eb1e3c904096be34657011)
(cherry picked from commit 4d0a1e0637450865c7bbac69e42d92d63b95149c)
(cherry picked from commit 5f40a485da1b2c5f129f32e2ddc2065e3ba9ccd0)
(cherry picked from commit c4cb7812e39add6f7ff3d6f3f2d4e02c66435f0e)
(cherry picked from commit d31ce2f03d69cc784e53e921968c714986a7a4ef)
(cherry picked from commit cfebef4f82643d4be4dd89d277d9ebc9ca98a26e)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4c6a8980cef932e224e84933d7c9262)
(cherry picked from commit 639dafabec0a5c1f943b44ca02f72c5ba2fc5e10)
(cherry picked from commit d699c12cebea7dbbda950ae257a46d53c39f22ea)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30ab5c7a40a456600cdaa8a0fbdccec2)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e56f4ecb3a4f6d1109d02c8aa1a6d182)
(cherry picked from commit 03989418a70d3445e0edada7fbe5a4151d7836b1)
(cherry picked from commit f50e0dfe5e90d6a31c5b59e687580e8b2725c22b)
(cherry picked from commit cad9184a3653e6c80de2e006a0d699b816980987)
(cherry picked from commit e2da5d7fe13a685606913a131687a94f9f5fcfeb)
(cherry picked from commit 3a80534d4db523efe56b368489f81dc1cb2c99f7)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd3146b0b942a94e2482b37595180e91)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da5630f9148faaf6b03bf1ac5724fa86b25)
(cherry picked from commit f7535a1cef96ce0589f37907f88b024cd095d0ac)
(cherry picked from commit 1a90cd37c31a1b9c770d6d79a4663ed8d67845c0)
(cherry picked from commit d86d71340afd372e5b5083d5563c2f5b48d975e6)
(cherry picked from commit 9e5cce1afccebcd6146e5e0d364bfdbb840b5276)
(cherry picked from commit 2013fb3fab5e23d0088434d835411f26a3fd9905)
(cherry picked from commit 88b9d21d1194abd133c3b4cbaa19792da433cb43)
(cherry picked from commit 72c020298eebcb0c90e23e7ff35e37be867afc44)
(cherry picked from commit 6525f730dfdd7cb412762d9e30348801335d17ee)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef35978336612588d68c1315179a45c73)
(cherry picked from commit b15bafcbc7d9033b0cc7b0fd888915b117e08d42)
(cherry picked from commit 93ba05a2dd9fdec46f337542cd5f22c8960ac55f)
(cherry picked from commit e418ea80822361e387b460c583592bbd83d4a39e)
(cherry picked from commit 321790a91ec8553d1b3668f606ebec762865dd17)
(cherry picked from commit f4e19d332392cb455b3b4e32e271f3e42302bbc8)
(cherry picked from commit 4d9923dee851a4046050761d3dd352f2f343f4fc)
(cherry picked from commit 049df69eda1ceb47f6e74c9a67e9ce5041e65c3b)
Conflicts:
services/doctor/push_mirror_consistency.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit c79cba8d556320be0da7ca8324b39cd8930465bf)
(cherry picked from commit f3a3969c02cade7261a5f25c9e342800ccdf9111)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f407c0e110f3c7a4102bf7ed7902b815f)
(cherry picked from commit de8f2e03cc7d274049dd6a849b3d226968782644)
(cherry picked from commit 0182cff12ed4b68bd49ebc2b9951d9a29f7a36ca)
(cherry picked from commit 9c74254d4606febd702315c670db4fb6b14040a1)
(cherry picked from commit 2f0b68f821ae53dd12b496cc660353d5bf7cd143)
(cherry picked from commit 079b995d49ba7a625035fe9ec53741f6b0112007)
(cherry picked from commit 6952ea6ee3de8157d056c4381de7529de6eaef7b)
(cherry picked from commit 6c7d5a5d140152be80ec38a979a2a7b704ce653a)
(cherry picked from commit 49c39f0ed5a011b26f2e33f35811bb31fab3cf64)
(cherry picked from commit a8f9727388192c6c22b2f8cbbae15a96203ec3b6)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384b081c36aa4c6b7167280f52c1c42d3)
(cherry picked from commit 9b9aca2a02b06f41f6db847a77ea29f6385b46d2)
(cherry picked from commit 0d0ab1af1fb05e26168c112523f1400fef67f9b0)
(cherry picked from commit d3b352c85482e59c9d1da24a8fe0eb68b0f5858e)
(cherry picked from commit d6af2094df4611d590d8c5062743f5e39f2a7bd8)
(cherry picked from commit f96e55a7a9f06ff987a5e9663da492720d162b76)
(cherry picked from commit bb6261f8479ee8925ddc7f0079b414ef85f04d73)
(cherry picked from commit f6a4146161fda22341c17dc74d42fd13ad181e1f)
(cherry picked from commit ed0292137991d08ee2e6518e74ec221f94f51415)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02b180d49dd025eb373dd8ab6d787cf7)
(cherry picked from commit 2cebe3ef94e6db45091ca8f02b2ed770b23564d6)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a41b69e313535e5e91e4272136a4bab1)
(cherry picked from commit c58566403df728c1f71b1dd554a573c011a59d7e)
(cherry picked from commit b8b3f6ab8b576a28ed06cc0e501b14950cf78282)
(cherry picked from commit 195520100b214d6bf7a2740507f0a7ae10e5a7d1)
(cherry picked from commit 6e417087ddf41e79a146366a5db157c7a76af615)
(cherry picked from commit ff91e5957ac728118cddb06bddd95d32cb4df815)
(cherry picked from commit 6626d5cc75681d3b16b4496a4e0e83a257a3f46a)
(cherry picked from commit 62f8ab793b12251e1793bc14ace95cda76121baa)
(cherry picked from commit e5bbf1a2d060b4ef1324afd8ed9b38e294b3dffb)
(cherry picked from commit f5b8c8edea5d17ba51327684a6e8127ac0f09503)
(cherry picked from commit 50948fa11b9c9ccac9e86dc9943bad71cf189370)
(cherry picked from commit 83a9f7f4429ac4e91d7a80a0aced32cd74bbfc4c)
(cherry picked from commit 679438b5d621fd58d0618c28cd08abe0a5625037)
(cherry picked from commit 17db07d6d0fcf40980129274e35ca76306dd205f)
- https://github.com/NYTimes/gziphandler doesn't seems to be maintained
anymore and Forgejo already includes
https://github.com/klauspost/compress which provides a maintained and
faster gzip handler fork.
- Enables Jitter to prevent BREACH attacks, as this *seems* to be
possible in the context of Forgejo.
(cherry picked from commit cc2847241d82001babd8d40c87d03169f21c14cd)
(cherry picked from commit 99ba56a8761dd08e08d9499cab2ded1a6b7b970f)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/1581
(cherry picked from commit 711638193daa2311e2ead6249a47dcec47b4e335)
(cherry picked from commit 9c12a37fde6fa84414bf332ff4a066facdb92d38)
(cherry picked from commit d13065345431a499f9e0b7a3c2043d7487b8aa5b)
(cherry picked from commit 45a16f8c3c6f7d5e4aab8fdde6a621cf36e4801c)
(cherry picked from commit a497acb31f76d580c8b0567f9461274bd78080f4)
(cherry picked from commit fe87fd828973945192b98310c5c3b2001c6e0f86)
(cherry picked from commit 6ac12e6693cf45cb12109028dabd868957c4b74c)
(cherry picked from commit 981ec37e1e72ab19c20067ff4d2a7e20a60d3305)
(cherry picked from commit 5d6892ec10086f0ba63f26693faa82d0fd4e3f4a)
(cherry picked from commit 9df7968f4fc72de9788d84ca3f349e4c98ee630e)
(cherry picked from commit 7d588d183329cd760053663ea2e1e82e62958409)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2075
(cherry picked from commit defb101281f5a6ba410abc763674bafa7b63dffd)
(cherry picked from commit 5830f204a17767fda3e45d16dbf3af8c32e7f387)
(cherry picked from commit 029f4e98636a7776f430684e9d7142d69a444f96)
(cherry picked from commit 816fe558126d0ecce969fdf2a196fa6afdcca792)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 99866d804560b415b6158371eb0efd17d097cfe0)
Earl Warren
