infra/hosts/nachtigall/configuration.nix

90 lines
2.5 KiB
Nix

{ config, pkgs, ... }:
{
# Use GRUB2 as the boot loader.
# We don't use systemd-boot because Hetzner uses BIOS legacy boot.
boot.loader.systemd-boot.enable = false;
boot.loader.grub = {
enable = true;
efiSupport = false;
mirroredBoots = [
{
devices = [
"/dev/disk/by-id/nvme-SAMSUNG_MZVL21T0HCLR-00B00_S676NF0R517371"
];
path = "/boot1";
}
{
devices = [
"/dev/disk/by-id/nvme-KXG60ZNV1T02_TOSHIBA_Z9NF704ZF9ZL"
];
path = "/boot2";
}
];
copyKernels = true;
};
boot.supportedFilesystems = [ "zfs" ];
boot.kernelParams = [
"boot.shell_on_fail=1"
"ip=138.201.80.102::138.201.80.65:255.255.255.192:nachtigall::off"
];
boot.initrd.availableKernelModules = [ "igb" ];
networking.hostName = "nachtigall";
networking.domain = "pub.solar";
networking.hostId = "00000001";
# enable flakes by default
nix = {
package = pkgs.nixFlakes;
extraOptions = ''
experimental-features = nix-command flakes
'';
};
# Set your time zone.
time.timeZone = "Etc/UTC";
environment = {
# just a couple of packages to make our lives easier
systemPackages = with pkgs; [ vim ];
};
# Network (Hetzner uses static IP assignments, and we don't use DHCP here)
networking.useDHCP = false;
networking.interfaces."enp35s0".ipv4.addresses = [
{
address = "138.201.80.102";
prefixLength = 26;
}
];
networking.interfaces."enp35s0".ipv6.addresses = [
{
address = "2a01:4f8:172:1c25::1";
prefixLength = 64;
}
];
networking.defaultGateway = "138.201.80.65";
networking.defaultGateway6 = { address = "fe80::1"; interface = "enp35s0"; };
services.resolved = {
enable = true;
extraConfig = ''
DNS=9.9.9.9#dns.quad9.net 149.112.112.112#dns.quad9.net 2620:fe::fe#dns.quad9.net 2620:fe::9#dns.quad9.net 193.110.81.0#dns0.eu 185.253.5.0#dns0.eu 2a0f:fc80::#dns0.eu 2a0f:fc81::#dns0.eu
FallbackDNS=5.1.66.255#dot.ffmuc.net 185.150.99.255#dot.ffmuc.net 2001:678:e68:f000::#dot.ffmuc.net 2001:678:ed0:f000::#dot.ffmuc.net
Domains=~.
DNSOverTLS=yes
'';
};
users.users.root.initialHashedPassword = "$y$j9T$bIN6GjQkmPMllOcQsq52K0$q0Z5B5.KW/uxXK9fItB8H6HO79RYAcI/ZZdB0Djke32";
# This value determines the NixOS release with which your system is to be
# compatible, in order to avoid breaking some software such as database
# servers. You should change this only after NixOS release notes say you
# should.
system.stateVersion = "23.05"; # Did you read the comment?
}