Merge branch 'testing' into 'main'

Merge Upstream - Bump Coturn version tag (4.5.2-r2 -> 4.5.2-r3)

See merge request GoMatrixHosting/matrix-docker-ansible-deploy!5
This commit is contained in:
Michael Collins 2021-09-04 06:30:06 +00:00
commit 7724247152
61 changed files with 927 additions and 312 deletions

View file

@ -1,3 +1,28 @@
# 2021-08-23
## LinkedIn bridging support via beeper-linkedin
Thanks to [Alexandar Mechev](https://github.com/apmechev), the playbook can now install the [beeper-linkedin](https://gitlab.com/beeper/linkedin) bridge for bridging to [LinkedIn](https://www.linkedin.com/) Messaging.
This brings the total number of bridges supported by the playbook up to 20. See all supported bridges [here](docs/configuring-playbook.md#bridging-other-networks).
To get started with bridging to LinkedIn, see [Setting up Beeper LinkedIn bridging](docs/configuring-playbook-bridge-beeper-linkedin.md).
# 2021-08-20
# Sygnal upgraded - ARM support and no longer requires a database
The [Sygnal](docs/configuring-playbook-sygnal.md) push gateway has been upgraded from `v0.9.0` to `v0.10.1`.
This is an optional component for the playbook, so most of our users wouldn't care about this announcement.
Since this feels like a relatively big (and untested, as of yet) Sygnal change, we're putting up this changelog entry.
The new version is also available for the ARM architecture. It also no longer requires a database anymore.
If you need to downgrade to the previous version, changing `matrix_sygnal_version` or `matrix_sygnal_docker_image` will not be enough, as we've removed the `database` configuration completely. You'd need to switch to an earlier playbook commit.
# 2021-05-21
## Hydrogen support

View file

@ -45,17 +45,19 @@ Using this playbook, you can get the following services configured on your serve
- (optional, advanced) the [Matrix Corporal](https://github.com/devture/matrix-corporal) reconciliator and gateway for a managed Matrix server
- (optional) the [mautrix-telegram](https://github.com/tulir/mautrix-telegram) bridge for bridging your Matrix server to [Telegram](https://telegram.org/)
- (optional) the [mautrix-telegram](https://github.com/mautrix/telegram) bridge for bridging your Matrix server to [Telegram](https://telegram.org/)
- (optional) the [mautrix-whatsapp](https://github.com/tulir/mautrix-whatsapp) bridge for bridging your Matrix server to [WhatsApp](https://www.whatsapp.com/)
- (optional) the [mautrix-whatsapp](https://github.com/mautrix/whatsapp) bridge for bridging your Matrix server to [WhatsApp](https://www.whatsapp.com/)
- (optional) the [mautrix-facebook](https://github.com/tulir/mautrix-facebook) bridge for bridging your Matrix server to [Facebook](https://facebook.com/)
- (optional) the [mautrix-facebook](https://github.com/mautrix/facebook) bridge for bridging your Matrix server to [Facebook](https://facebook.com/)
- (optional) the [mautrix-hangouts](https://github.com/tulir/mautrix-hangouts) bridge for bridging your Matrix server to [Google Hangouts](https://en.wikipedia.org/wiki/Google_Hangouts)
- (optional) the [mautrix-hangouts](https://github.com/mautrix/hangouts) bridge for bridging your Matrix server to [Google Hangouts](https://en.wikipedia.org/wiki/Google_Hangouts)
- (optional) the [mautrix-instagram](https://github.com/tulir/mautrix-instagram) bridge for bridging your Matrix server to [Instagram](https://instagram.com/)
- (optional) the [mautrix-instagram](https://github.com/mautrix/instagram) bridge for bridging your Matrix server to [Instagram](https://instagram.com/)
- (optional) the [mautrix-signal](https://github.com/tulir/mautrix-signal) bridge for bridging your Matrix server to [Signal](https://www.signal.org/)
- (optional) the [mautrix-signal](https://github.com/mautrix/signal) bridge for bridging your Matrix server to [Signal](https://www.signal.org/)
- (optional) the [beeper-linkedin](https://gitlab.com/beeper/linkedin) bridge for bridging your Matrix server to [LinkedIn](https://www.linkedin.com/)
- (optional) the [matrix-appservice-irc](https://github.com/matrix-org/matrix-appservice-irc) bridge for bridging your Matrix server to [IRC](https://wikipedia.org/wiki/Internet_Relay_Chat)

View file

@ -0,0 +1,59 @@
# Setting up Beeper Linkedin (optional)
The playbook can install and configure [beeper-linkedin](https://gitlab.com/beeper/linkedin) for you, for bridging to [LinkedIn](https://www.linkedin.com/) Messaging. This bridge is based on the mautrix-python framework and can be configured in a similar way to the other mautrix bridges
See the project's [documentation](https://gitlab.com/beeper/linkedin/-/blob/master/README.md) to learn what it does and why it might be useful to you.
```yaml
matrix_beeper_linkedin_enabled: true
```
There are some additional things you may wish to configure about the bridge before you continue.
Encryption support is off by default. If you would like to enable encryption, add the following to your `vars.yml` file:
```yaml
matrix_beeper_linkedin_configuration_extension_yaml: |
bridge:
encryption:
allow: true
default: true
```
If you would like to be able to administrate the bridge from your account it can be configured like this:
```yaml
matrix_beeper_linkedin_configuration_extension_yaml: |
bridge:
permissions:
'@YOUR_USERNAME:YOUR_DOMAIN': admin
```
You may wish to look at `roles/matrix-bridge-beeper-linkedin/templates/config.yaml.j2` to find other things you would like to configure.
## Set up Double Puppeting
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
### Method 1: automatically, by enabling Shared Secret Auth
The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
## Usage
You then need to start a chat with `@linkedinbot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).
Send `login YOUR_LINKEDIN_EMAIL_ADDRESS` to the bridge bot to enable bridging for your LinkedIn account.
If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
## Troubleshooting
### Bridge asking for 2FA even if you don't have 2FA enabled
If you don't have 2FA enabled and are logging in from a strange IP for the first time, LinkedIn will send an email with a one-time code. You can use this code to authorize the bridge session. In my experience, once the IP is authorized, you will not be asked again.

View file

@ -1,8 +1,8 @@
# Setting up Mautrix Facebook (optional)
The playbook can install and configure [mautrix-facebook](https://github.com/tulir/mautrix-facebook) for you.
The playbook can install and configure [mautrix-facebook](https://github.com/mautrix/facebook) for you.
See the project's [documentation](https://github.com/tulir/mautrix-facebook/blob/master/ROADMAP.md) to learn what it does and why it might be useful to you.
See the project's [documentation](https://github.com/mautrix/facebook/blob/master/ROADMAP.md) to learn what it does and why it might be useful to you.
```yaml
matrix_mautrix_facebook_enabled: true

View file

@ -1,8 +1,8 @@
# Setting up Mautrix Hangouts (optional)
The playbook can install and configure [mautrix-hangouts](https://github.com/tulir/mautrix-hangouts) for you.
The playbook can install and configure [mautrix-hangouts](https://github.com/mautrix/hangouts) for you.
See the project's [documentation](https://github.com/tulir/mautrix-hangouts/wiki#usage) to learn what it does and why it might be useful to you.
See the project's [documentation](https://docs.mau.fi/bridges/python/hangouts/index.html) to learn what it does and why it might be useful to you.
To enable the [Google Hangouts](https://hangouts.google.com/) bridge just use the following playbook configuration:
@ -14,7 +14,7 @@ matrix_mautrix_hangouts_enabled: true
## Set up Double Puppeting
If you'd like to use [Double Puppeting](https://github.com/tulir/mautrix-hangouts/wiki/Authentication#double-puppeting) (hint: you most likely do), you have 2 ways of going about it.
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
### Method 1: automatically, by enabling Shared Secret Auth
@ -52,7 +52,7 @@ Automatic login may not work. If it does not, reload the page and select the "Ma
Once logged in, recent chats should show up as new conversations automatically. Other chats will get portals as you receive messages.
You can learn more about authentication from the bridge's [official documentation on Authentication](https://github.com/tulir/mautrix-hangouts/wiki/Authentication).
You can learn more about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/hangouts/authentication.html).
After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.

View file

@ -1,6 +1,6 @@
# Setting up Mautrix Instagram (optional)
The playbook can install and configure [mautrix-instagram](https://github.com/tulir/mautrix-instagram) for you.
The playbook can install and configure [mautrix-instagram](https://github.com/mautrix/instagram) for you.
See the project's [documentation](https://docs.mau.fi/bridges/python/instagram/index.html) to learn what it does and why it might be useful to you.

View file

@ -1,8 +1,8 @@
# Setting up Mautrix Signal (optional)
The playbook can install and configure [mautrix-signal](https://github.com/tulir/mautrix-signal) for you.
The playbook can install and configure [mautrix-signal](https://github.com/mautrix/signal) for you.
See the project's [documentation](https://github.com/tulir/mautrix-signal/wiki) to learn what it does and why it might be useful to you.
See the project's [documentation](https://docs.mau.fi/bridges/python/signal/index.html) to learn what it does and why it might be useful to you.
**Note/Prerequisite**: If you're running with the Postgres database server integrated by the playbook (which is the default), you don't need to do anything special and can easily proceed with installing. However, if you're [using an external Postgres server](configuring-playbook-external-postgres.md), you'd need to manually prepare a Postgres database for this bridge and adjust the variables related to that (`matrix_mautrix_signal_database_*`).
@ -12,9 +12,54 @@ Use the following playbook configuration:
matrix_mautrix_signal_enabled: true
```
There are some additional things you may wish to configure about the bridge before you continue.
The relay bot functionality is off by default. If you would like to enable the relay bot, add the following to your `vars.yml` file:
```yaml
matrix_mautrix_signal_relaybot_enabled: true
```
If you want to activate the relay bot in a room, use `!signal set-relay`.
Use `!signal unset-relay` to deactivate.
By default, any user on your homeserver will be able to use the bridge.
If you enable the relay bot functionality, it will relay every user's messages in a portal room - no matter which homeserver they're from.
Different levels of permission can be granted to users:
* relay - Allowed to be relayed through the bridge, no access to commands;
* user - Use the bridge with puppeting;
* admin - Use and administer the bridge.
The permissions are following the sequence: nothing < relay < user < admin.
The default permissions are set as follows:
```yaml
permissions:
'*': relay
YOUR_DOMAIN: user
```
If you want to augment the preset permissions, you might want to set the additional permissions with the following settings in your `vars.yml` file:
```yaml
matrix_mautrix_signal_configuration_extension_yaml: |
bridge:
permissions:
'@YOUR_USERNAME:YOUR_DOMAIN': admin
```
This will add the admin permission to the specific user, while keepting the default permissions.
In case you want to replace the default permissions settings **completely**, populate the following item within your `vars.yml` file:
```yaml
matrix_mautrix_signal_bridge_permissions: |
'@ADMIN:YOUR_DOMAIN': admin
'@USER:YOUR_DOMAIN' : user
```
You may wish to look at `roles/matrix-bridge-mautrix-signal/templates/config.yaml.j2` to find more information on the permissions settings and other options you would like to configure.
## Set up Double Puppeting
If you'd like to use [Double Puppeting](https://github.com/tulir/mautrix-signal/wiki/Authentication#double-puppeting) (hint: you most likely do), you have 2 ways of going about it.
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
### Method 1: automatically, by enabling Shared Secret Auth

View file

@ -1,8 +1,8 @@
# Setting up Mautrix Telegram (optional)
The playbook can install and configure [mautrix-telegram](https://github.com/tulir/mautrix-telegram) for you.
The playbook can install and configure [mautrix-telegram](https://github.com/mautrix/telegram) for you.
See the project's [documentation](https://github.com/tulir/mautrix-telegram/wiki#usage) to learn what it does and why it might be useful to you.
See the project's [documentation](https://docs.mau.fi/bridges/python/telegram/index.html) to learn what it does and why it might be useful to you.
You'll need to obtain API keys from [https://my.telegram.org/apps](https://my.telegram.org/apps) and then use the following playbook configuration:
@ -14,7 +14,7 @@ matrix_mautrix_telegram_api_hash: YOUR_TELEGRAM_API_HASH
## Set up Double Puppeting
If you'd like to use [Double Puppeting](https://github.com/tulir/mautrix-telegram/wiki/Authentication#replacing-telegram-accounts-matrix-puppet-with-matrix-account) (hint: you most likely do), you have 2 ways of going about it.
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
### Method 1: automatically, by enabling Shared Secret Auth
@ -45,7 +45,7 @@ https://matrix.DOMAIN/_matrix/client/r0/login
You then need to start a chat with `@telegrambot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).
If you want to use the relay-bot feature ([relay bot documentation](https://github.com/tulir/mautrix-telegram/wiki/Relay-bot)), which allows anonymous user to chat with telegram users, use the following additional playbook configuration:
If you want to use the relay-bot feature ([relay bot documentation](https://docs.mau.fi/bridges/python/telegram/relay-bot.html)), which allows anonymous user to chat with telegram users, use the following additional playbook configuration:
```yaml
matrix_mautrix_telegram_bot_token: YOUR_TELEGRAM_BOT_TOKEN

View file

@ -1,8 +1,8 @@
# Setting up Mautrix Whatsapp (optional)
The playbook can install and configure [mautrix-whatsapp](https://github.com/tulir/mautrix-whatsapp) for you.
The playbook can install and configure [mautrix-whatsapp](https://github.com/mautrix/whatsapp) for you.
See the project's [documentation](https://github.com/tulir/mautrix-whatsapp/wiki) to learn what it does and why it might be useful to you.
See the project's [documentation](https://docs.mau.fi/bridges/go/whatsapp/index.html) to learn what it does and why it might be useful to you.
Use the following playbook configuration:
@ -13,7 +13,7 @@ matrix_mautrix_whatsapp_enabled: true
## Set up Double Puppeting
If you'd like to use [Double Puppeting](https://github.com/tulir/mautrix-whatsapp/wiki/Authentication#replacing-whatsapp-accounts-matrix-puppet-with-matrix-account) (hint: you most likely do), you have 2 ways of going about it.
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
### Method 1: automatically, by enabling Shared Secret Auth

View file

@ -24,7 +24,7 @@ matrix_dimension_enabled: true
## Define admin users
These users can modify the integrations this Dimension supports. Admin interface is accessible by opening Dimension in Element and clicking the settings icon.
These users can modify the integrations this Dimension supports. Admin interface is accessible at `https://dimension.<your-domain>/riot-app/admin` after logging in to element.
Add this to your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
```yaml

View file

@ -26,7 +26,6 @@ matrix_jitsi_enabled: true
# Run `bash inventory/scripts/jitsi-generate-passwords.sh` to generate these passwords,
# or define your own strong passwords manually.
matrix_jitsi_jicofo_component_secret: ""
matrix_jitsi_jicofo_auth_password: ""
matrix_jitsi_jvb_auth_password: ""
matrix_jitsi_jibri_recorder_password: ""

View file

@ -104,6 +104,8 @@ When you're done with all the configuration you'd like to do, continue with [Ins
- [Setting up Appservice IRC bridging](configuring-playbook-bridge-appservice-irc.md) (optional)
- [Setting up Beeper LinkedIn bridging](configuring-playbook-bridge-beeper-linkedin.md) (optional)
- [Setting up Appservice Discord bridging](configuring-playbook-bridge-appservice-discord.md) (optional)
- [Setting up Appservice Slack bridging](configuring-playbook-bridge-appservice-slack.md) (optional)

View file

@ -40,17 +40,17 @@ These services are not part of our default installation, but can be enabled by [
- [zeratax/matrix-registration](https://hub.docker.com/r/devture/zeratax-matrix-registration/) - [matrix-registration](https://github.com/ZerataX/matrix-registration): a simple python application to have a token based matrix registration (optional)
- [tulir/mautrix-telegram](https://mau.dev/tulir/mautrix-telegram/container_registry) - the [mautrix-telegram](https://github.com/tulir/mautrix-telegram) bridge to [Telegram](https://telegram.org/) (optional)
- [mautrix/telegram](https://mau.dev/mautrix/telegram/container_registry) - the [mautrix-telegram](https://github.com/mautrix/telegram) bridge to [Telegram](https://telegram.org/) (optional)
- [tulir/mautrix-whatsapp](https://mau.dev/tulir/mautrix-whatsapp/container_registry) - the [mautrix-whatsapp](https://github.com/tulir/mautrix-whatsapp) bridge to [Whatsapp](https://www.whatsapp.com/) (optional)
- [mautrix/whatsapp](https://mau.dev/mautrix/whatsapp/container_registry) - the [mautrix-whatsapp](https://github.com/mautrix/whatsapp) bridge to [Whatsapp](https://www.whatsapp.com/) (optional)
- [tulir/mautrix-facebook](https://mau.dev/tulir/mautrix-facebook/container_registry) - the [mautrix-facebook](https://github.com/tulir/mautrix-facebook) bridge to [Facebook](https://facebook.com/) (optional)
- [mautrix/facebook](https://mau.dev/mautrix/facebook/container_registry) - the [mautrix-facebook](https://github.com/mautrix/facebook) bridge to [Facebook](https://facebook.com/) (optional)
- [tulir/mautrix-hangouts](https://mau.dev/tulir/mautrix-hangouts/container_registry) - the [mautrix-hangouts](https://github.com/tulir/mautrix-hangouts) bridge to [Google Hangouts](https://en.wikipedia.org/wiki/Google_Hangouts) (optional)
- [mautrix/hangouts](https://mau.dev/mautrix/hangouts/container_registry) - the [mautrix-hangouts](https://github.com/mautrix/hangouts) bridge to [Google Hangouts](https://en.wikipedia.org/wiki/Google_Hangouts) (optional)
- [tulir/mautrix-instagram](https://mau.dev/tulir/mautrix-instagram/container_registry) - the [mautrix-instagram](https://github.com/tulir/mautrix-instagram) bridge to [Instagram](https://instagram.com/) (optional)
- [mautrix/instagram](https://mau.dev/mautrix/instagram/container_registry) - the [mautrix-instagram](https://github.com/mautrix/instagram) bridge to [Instagram](https://instagram.com/) (optional)
- [tulir/mautrix-signal](https://mau.dev/tulir/mautrix-signal/container_registry) - the [mautrix-signal](https://github.com/tulir/mautrix-signal) bridge to [Signal](https://www.signal.org/) (optional)
- [mautrix/signal](https://mau.dev/mautrix/signal/container_registry) - the [mautrix-signal](https://github.com/mautrix/signal) bridge to [Signal](https://www.signal.org/) (optional)
- [matrixdotorg/matrix-appservice-irc](https://hub.docker.com/r/matrixdotorg/matrix-appservice-irc) - the [matrix-appservice-irc](https://github.com/matrix-org/matrix-appservice-irc) bridge to [IRC](https://wikipedia.org/wiki/Internet_Relay_Chat) (optional)

View file

@ -27,8 +27,6 @@ ansible-playbook -i inventory/hosts setup.yml \
--tags=import-postgres
```
We specify the `synapse` database as the default import database. If your dump is a single-database dump (`pg_dump`), then we need to tell it where to go to. If you're redefining `matrix_synapse_database_database` to something other than `synapse`, please adjust it here too. For database dumps spanning multiple databases (`pg_dumpall`), you can remove the `postgres_default_import_database` definition (but it doesn't hurt to keep it too).
**Note**: `<server-path-to-postgres-dump.sql>` must be a file path to a Postgres dump file on the server (not on your local machine!).

View file

@ -42,11 +42,7 @@ matrix_awx_enabled: false
matrix_nginx_proxy_data_path: "{{ '/chroot/website' if (matrix_awx_enabled and not matrix_nginx_proxy_base_domain_homepage_enabled) else (matrix_nginx_proxy_base_path + '/data') }}"
matrix_nginx_proxy_data_path_in_container: "{{ '/nginx-data/matrix-domain' if (matrix_awx_enabled and not matrix_nginx_proxy_base_domain_homepage_enabled) else '/nginx-data' }}"
matrix_nginx_proxy_data_path_extension: "{{ '' if (matrix_awx_enabled and not matrix_nginx_proxy_base_domain_homepage_enabled) else '/matrix-domain' }}"
<<<<<<< HEAD
matrix_nginx_proxy_base_domain_create_directory: "{{ false if matrix_awx_enabled else true }}"
=======
matrix_nginx_proxy_base_domain_create_directory: "{{ not matrix_awx_enabled }}"
>>>>>>> upstream/master
######################################################################
#
@ -220,6 +216,42 @@ matrix_appservice_irc_database_password: "{{ matrix_synapse_macaroon_secret_key
######################################################################
######################################################################
#
# matrix-bridge-beeper-linkedin
#
######################################################################
# We don't enable bridges by default.
matrix_beeper_linkedin_enabled: false
matrix_beeper_linkedin_systemd_required_services_list: |
{{
['docker.service']
+
(['matrix-synapse.service'] if matrix_synapse_enabled else [])
+
(['matrix-postgres.service'] if matrix_postgres_enabled else [])
+
(['matrix-nginx-proxy.service'] if matrix_nginx_proxy_enabled else [])
}}
matrix_beeper_linkedin_appservice_token: "{{ matrix_synapse_macaroon_secret_key | password_hash('sha512', 'linked.as.token') | to_uuid }}"
matrix_beeper_linkedin_homeserver_token: "{{ matrix_synapse_macaroon_secret_key | password_hash('sha512', 'linked.hs.token') | to_uuid }}"
matrix_beeper_linkedin_login_shared_secret: "{{ matrix_synapse_ext_password_provider_shared_secret_auth_shared_secret if matrix_synapse_ext_password_provider_shared_secret_auth_enabled else '' }}"
matrix_beeper_linkedin_bridge_presence: "{{ matrix_synapse_presence_enabled if matrix_synapse_enabled else true }}"
matrix_beeper_linkedin_database_password: "{{ matrix_synapse_macaroon_secret_key | password_hash('sha512', 'maulinkedin.db') | to_uuid }}"
######################################################################
#
# /matrix-bridge-beeper-linkedin
#
######################################################################
######################################################################
#
# matrix-bridge-mautrix-facebook
@ -1376,6 +1408,12 @@ matrix_postgres_additional_databases: |
'password': matrix_appservice_irc_database_password,
}] if (matrix_appservice_irc_enabled and matrix_appservice_irc_database_engine == 'postgres' and matrix_appservice_irc_database_hostname == 'matrix-postgres') else [])
+
([{
'name': matrix_beeper_linkedin_database_name,
'username': matrix_beeper_linkedin_database_username,
'password': matrix_beeper_linkedin_database_password,
}] if (matrix_beeper_linkedin_enabled and matrix_beeper_linkedin_database_engine == 'postgres' and matrix_beeper_linkedin_database_hostname == 'matrix-postgres') else [])
+
([{
'name': matrix_mautrix_facebook_database_name,
'username': matrix_mautrix_facebook_database_username,
@ -1466,12 +1504,6 @@ matrix_postgres_additional_databases: |
'password': matrix_etherpad_database_password,
}] if (matrix_etherpad_enabled and matrix_etherpad_database_engine == 'postgres' and matrix_etherpad_database_hostname == 'matrix-postgres') else [])
+
([{
'name': matrix_sygnal_database_name,
'username': matrix_sygnal_database_username,
'password': matrix_sygnal_database_password,
}] if (matrix_sygnal_enabled and matrix_sygnal_database_engine == 'postgres' and matrix_sygnal_database_hostname == 'matrix-postgres') else [])
+
([{
'name': matrix_prometheus_postgres_exporter_database_name,
'username': matrix_prometheus_postgres_exporter_database_username,
@ -1516,10 +1548,6 @@ matrix_sygnal_metrics_prometheus_enabled: "{{ matrix_prometheus_enabled }}"
matrix_sygnal_container_http_host_bind_port: "{{ '' if matrix_nginx_proxy_enabled else '127.0.0.1:6000' }}"
# Postgres is the default, except if not using `matrix_postgres` (internal postgres)
matrix_sygnal_database_engine: "{{ 'postgres' if matrix_postgres_enabled else 'sqlite' }}"
matrix_sygnal_database_password: "{{ matrix_synapse_macaroon_secret_key | password_hash('sha512', 'sygnal') | to_uuid }}"
######################################################################
#
# /matrix-sygnal

View file

@ -25,7 +25,7 @@
when: run_setup|bool and matrix_awx_enabled|bool
tags:
- backup-server
# Perform a export of the server
- include_tasks:
file: "export_server.yml"

View file

@ -1,8 +1,13 @@
- name: Check if matrix_vars.yml file exists
stat:
path: "/var/lib/awx/projects/clients/{{ member_id }}/{{ subscription_id }}/matrix_vars.yml"
register: matrix_vars_file
- name: Rename synapse presence variable
delegate_to: 127.0.0.1
replace:
path: "/var/lib/awx/projects/clients/{{ member_id }}/{{ subscription_id }}/matrix_vars.yml"
regexp: 'matrix_synapse_use_presence'
replace: 'matrix_synapse_presence_enabled'
when: matrix_vars_file.stat.exists

View file

@ -3,7 +3,7 @@
matrix_bot_mjolnir_enabled: true
matrix_bot_mjolnir_version: "v0.1.18"
matrix_bot_mjolnir_version: "v0.1.19"
matrix_bot_mjolnir_container_image_self_build: false
matrix_bot_mjolnir_container_image_self_build_repo: "https://github.com/matrix-org/mjolnir.git"

View file

@ -7,7 +7,7 @@ matrix_appservice_irc_container_self_build: false
matrix_appservice_irc_docker_repo: "https://github.com/matrix-org/matrix-appservice-irc.git"
matrix_appservice_irc_docker_src_files_path: "{{ matrix_base_data_path }}/appservice-irc/docker-src"
matrix_appservice_irc_version: release-v0.29.0
matrix_appservice_irc_version: release-0.30.0
matrix_appservice_irc_docker_image: "{{ matrix_container_global_registry_prefix }}matrixdotorg/matrix-appservice-irc:{{ matrix_appservice_irc_version }}"
matrix_appservice_irc_docker_image_force_pull: "{{ matrix_appservice_irc_docker_image.endswith(':latest') }}"

View file

@ -0,0 +1,100 @@
# beeper-linkedin is a Matrix <-> LinkedIn bridge
# See: https://gitlab.com/beeper/linkedin
matrix_beeper_linkedin_enabled: true
matrix_beeper_linkedin_version: v0.5.0
# See: https://gitlab.com/beeper/linkedin/container_registry
matrix_beeper_linkedin_docker_image: "registry.gitlab.com/beeper/linkedin:{{ matrix_beeper_linkedin_version }}-amd64"
matrix_beeper_linkedin_docker_image_force_pull: "{{ matrix_beeper_linkedin_docker_image.endswith(':latest-amd64') }}"
matrix_beeper_linkedin_base_path: "{{ matrix_base_data_path }}/beeper-linkedin"
matrix_beeper_linkedin_config_path: "{{ matrix_beeper_linkedin_base_path }}/config"
matrix_beeper_linkedin_data_path: "{{ matrix_beeper_linkedin_base_path }}/data"
matrix_beeper_linkedin_homeserver_address: "{{ matrix_homeserver_container_url }}"
matrix_beeper_linkedin_homeserver_domain: "{{ matrix_domain }}"
matrix_beeper_linkedin_appservice_address: "http://matrix-beeper-linkedin:29319"
# A list of extra arguments to pass to the container
matrix_beeper_linkedin_container_extra_arguments: []
# List of systemd services that matrix-beeper-linkedin.service depends on.
matrix_beeper_linkedin_systemd_required_services_list: ['docker.service']
# List of systemd services that matrix-beeper-linkedin.service wants
matrix_beeper_linkedin_systemd_wanted_services_list: []
matrix_beeper_linkedin_appservice_token: ""
matrix_beeper_linkedin_homeserver_token: ""
matrix_beeper_linkedin_appservice_bot_username: linkedinbot
# Database-related configuration fields.
# Only Postgres is supported.
matrix_beeper_linkedin_database_engine: "postgres"
matrix_beeper_linkedin_database_username: 'matrix_beeper_linkedin'
matrix_beeper_linkedin_database_password: ""
matrix_beeper_linkedin_database_hostname: 'matrix-postgres'
matrix_beeper_linkedin_database_port: 5432
matrix_beeper_linkedin_database_name: 'matrix_beeper_linkedin'
matrix_beeper_linkedin_database_connection_string: 'postgresql://{{ matrix_beeper_linkedin_database_username }}:{{ matrix_beeper_linkedin_database_password }}@{{ matrix_beeper_linkedin_database_hostname }}:{{ matrix_beeper_linkedin_database_port }}/{{ matrix_beeper_linkedin_database_name }}?sslmode=disable'
matrix_beeper_linkedin_appservice_database_type: "{{
{
'postgres':'postgres',
}[matrix_beeper_linkedin_database_engine]
}}"
matrix_beeper_linkedin_appservice_database_uri: "{{
{
'postgres': matrix_beeper_linkedin_database_connection_string,
}[matrix_beeper_linkedin_database_engine]
}}"
# Can be set to enable automatic double-puppeting via Shared Secret Auth (https://github.com/devture/matrix-synapse-shared-secret-auth).
matrix_beeper_linkedin_login_shared_secret: ''
# Default beeper-linkedin configuration template which covers the generic use case.
# You can customize it by controlling the various variables inside it.
#
# For a more advanced customization, you can extend the default (see `matrix_beeper_linkedin_configuration_extension_yaml`)
# or completely replace this variable with your own template.
matrix_beeper_linkedin_configuration_yaml: "{{ lookup('template', 'templates/config.yaml.j2') }}"
matrix_beeper_linkedin_configuration_extension_yaml: |
# Your custom YAML configuration goes here.
# This configuration extends the default starting configuration (`matrix_beeper_linkedin_configuration_yaml`).
#
# You can override individual variables from the default configuration, or introduce new ones.
#
# If you need something more special, you can take full control by
# completely redefining `matrix_beeper_linkedin_configuration_yaml`.
matrix_beeper_linkedin_configuration_extension: "{{ matrix_beeper_linkedin_configuration_extension_yaml|from_yaml if matrix_beeper_linkedin_configuration_extension_yaml|from_yaml is mapping else {} }}"
# Holds the final configuration (a combination of the default and its extension).
# You most likely don't need to touch this variable. Instead, see `matrix_beeper_linkedin_configuration_yaml`.
matrix_beeper_linkedin_configuration: "{{ matrix_beeper_linkedin_configuration_yaml|from_yaml|combine(matrix_beeper_linkedin_configuration_extension, recursive=True) }}"
matrix_beeper_linkedin_registration_yaml: |
id: linkedin
url: {{ matrix_beeper_linkedin_appservice_address }}
as_token: "{{ matrix_beeper_linkedin_appservice_token }}"
hs_token: "{{ matrix_beeper_linkedin_homeserver_token }}"
sender_localpart: _bot_{{ matrix_beeper_linkedin_appservice_bot_username }}
rate_limited: false
namespaces:
users:
- regex: '^@linkedin_.+:{{ matrix_beeper_linkedin_homeserver_domain|regex_escape }}$'
exclusive: true
- exclusive: true
regex: '^@{{ matrix_beeper_linkedin_appservice_bot_username|regex_escape }}:{{ matrix_beeper_linkedin_homeserver_domain|regex_escape }}$'
de.sorunome.msc2409.push_ephemeral: true
matrix_beeper_linkedin_registration: "{{ matrix_beeper_linkedin_registration_yaml|from_yaml }}"

View file

@ -0,0 +1,16 @@
- set_fact:
matrix_systemd_services_list: "{{ matrix_systemd_services_list + ['matrix-beeper-linkedin.service'] }}"
when: matrix_beeper_linkedin_enabled|bool
# If the matrix-synapse role is not used, these variables may not exist.
- set_fact:
matrix_synapse_container_extra_arguments: >
{{ matrix_synapse_container_extra_arguments|default([]) }}
+
["--mount type=bind,src={{ matrix_beeper_linkedin_config_path }}/registration.yaml,dst=/matrix-beeper-linkedin-registration.yaml,ro"]
matrix_synapse_app_service_config_files: >
{{ matrix_synapse_app_service_config_files|default([]) }}
+
{{ ["/matrix-beeper-linkedin-registration.yaml"] }}
when: matrix_beeper_linkedin_enabled|bool

View file

@ -0,0 +1,21 @@
- import_tasks: "{{ role_path }}/tasks/init.yml"
tags:
- always
- import_tasks: "{{ role_path }}/tasks/validate_config.yml"
when: "run_setup|bool and matrix_beeper_linkedin_enabled|bool"
tags:
- setup-all
- setup-beeper-linkedin
- import_tasks: "{{ role_path }}/tasks/setup_install.yml"
when: "run_setup and matrix_beeper_linkedin_enabled"
tags:
- setup-all
- setup-beeper-linkedin
- import_tasks: "{{ role_path }}/tasks/setup_uninstall.yml"
when: "run_setup and not matrix_beeper_linkedin_enabled"
tags:
- setup-all
- setup-beeper-linkedin

View file

@ -0,0 +1,56 @@
---
# If the matrix-synapse role is not used, `matrix_synapse_role_executed` won't exist.
# We don't want to fail in such cases.
- name: Fail if matrix-synapse role already executed
fail:
msg: >-
The matrix-bridge-beeper-linkedin role needs to execute before the matrix-synapse role.
when: "matrix_synapse_role_executed|default(False)"
- name: Ensure Beeper LinkedIn image is pulled
docker_image:
name: "{{ matrix_beeper_linkedin_docker_image }}"
source: "{{ 'pull' if ansible_version.major > 2 or ansible_version.minor > 7 else omit }}"
force_source: "{{ matrix_beeper_linkedin_docker_image_force_pull if ansible_version.major > 2 or ansible_version.minor >= 8 else omit }}"
force: "{{ omit if ansible_version.major > 2 or ansible_version.minor >= 8 else matrix_beeper_linkedin_docker_image_force_pull }}"
- name: Ensure Beeper LinkedIn paths exists
file:
path: "{{ item }}"
state: directory
mode: 0750
owner: "{{ matrix_user_username }}"
group: "{{ matrix_user_groupname }}"
with_items:
- "{{ matrix_beeper_linkedin_base_path }}"
- "{{ matrix_beeper_linkedin_config_path }}"
- "{{ matrix_beeper_linkedin_data_path }}"
- name: Ensure beeper-linkedin config.yaml installed
copy:
content: "{{ matrix_beeper_linkedin_configuration|to_nice_yaml }}"
dest: "{{ matrix_beeper_linkedin_config_path }}/config.yaml"
mode: 0644
owner: "{{ matrix_user_username }}"
group: "{{ matrix_user_groupname }}"
- name: Ensure beeper-linkedin registration.yaml installed
copy:
content: "{{ matrix_beeper_linkedin_registration|to_nice_yaml }}"
dest: "{{ matrix_beeper_linkedin_config_path }}/registration.yaml"
mode: 0644
owner: "{{ matrix_user_username }}"
group: "{{ matrix_user_groupname }}"
- name: Ensure matrix-beeper-linkedin.service installed
template:
src: "{{ role_path }}/templates/systemd/matrix-beeper-linkedin.service.j2"
dest: "{{ matrix_systemd_path }}/matrix-beeper-linkedin.service"
mode: 0644
register: matrix_beeper_linkedin_systemd_service_result
- name: Ensure systemd reloaded after matrix-beeper-linkedin.service installation
service:
daemon_reload: yes
when: "matrix_beeper_linkedin_systemd_service_result.changed"

View file

@ -0,0 +1,24 @@
---
- name: Check existence of matrix-beeper-linkedin service
stat:
path: "{{ matrix_systemd_path }}/matrix-beeper-linkedin.service"
register: matrix_beeper_linkedin_service_stat
- name: Ensure matrix-beeper-linkedin is stopped
service:
name: matrix-beeper-linkedin
state: stopped
daemon_reload: yes
when: "matrix_beeper_linkedin_service_stat.stat.exists"
- name: Ensure matrix-beeper-linkedin.service doesn't exist
file:
path: "{{ matrix_systemd_path }}/matrix-beeper-linkedin.service"
state: absent
when: "matrix_beeper_linkedin_service_stat.stat.exists"
- name: Ensure systemd reloaded after matrix-beeper-linkedin.service removal
service:
daemon_reload: yes
when: "matrix_beeper_linkedin_service_stat.stat.exists"

View file

@ -0,0 +1,11 @@
---
- name: Fail if required settings not defined
fail:
msg: >-
You need to define a required configuration setting (`{{ item }}`).
when: "vars[item] == ''"
with_items:
- "matrix_beeper_linkedin_appservice_token"
- "matrix_beeper_linkedin_homeserver_token"

View file

@ -0,0 +1,267 @@
#jinja2: lstrip_blocks: "True"
# Homeserver details.
homeserver:
# The address that this appservice can use to connect to the homeserver.
address: {{ matrix_beeper_linkedin_homeserver_address }}
# The domain of the homeserver (for MXIDs, etc).
domain: {{ matrix_beeper_linkedin_homeserver_domain }}
# Whether or not to verify the SSL certificate of the homeserver.
# Only applies if address starts with https://
verify_ssl: true
# Whether or not the homeserver supports asmux-specific endpoints,
# such as /_matrix/client/unstable/net.maunium.asmux/dms for atomically
# updating m.direct.
asmux: false
# Number of retries for all HTTP requests if the homeserver isn't reachable.
http_retry_count: 4
appservice:
# The address that the homeserver can use to connect to this appservice.
address: {{ matrix_beeper_linkedin_appservice_address }}
# The hostname and port where this appservice should listen.
hostname: 0.0.0.0
port: 29319
# The maximum body size of appservice API requests (from the homeserver) in mebibytes
# Usually 1 is enough, but on high-traffic bridges you might need to increase this to avoid 413s
max_body_size: 1
# The full URI to the database. Only Postgres is currently supported.
database: {{ matrix_beeper_linkedin_appservice_database_uri|to_json }}
# Additional arguments for asyncpg.create_pool()
# https://magicstack.github.io/asyncpg/current/api/index.html#asyncpg.pool.create_pool
database_opts:
min_size: 5
max_size: 10
# Provisioning API part of the web server for automated portal creation and fetching information.
# Used by things like mautrix-manager (https://github.com/tulir/mautrix-manager).
provisioning:
# Whether or not the provisioning API should be enabled.
enabled: true
# The prefix to use in the provisioning API endpoints.
prefix: /_matrix/provision/v1
# The shared secret to authorize users of the API.
# Set to "generate" to generate and save a new token.
shared_secret: generate
# The unique ID of this appservice.
id: beeper_linkedin
# Appservice bot details.
bot:
# Username of the appservice bot.
username: {{ matrix_beeper_linkedin_appservice_bot_username|to_json }}
# Display name and avatar for bot. Set to "remove" to remove display name/avatar, leave empty
# to leave display name/avatar as-is.
displayname: LinkedIn bridge bot
avatar: mxc://sumnerevans.com/XMtwdeUBnxYvWNFFrfeTSHqB
# Whether or not to receive ephemeral events via appservice transactions.
# Requires MSC2409 support (i.e. Synapse 1.22+).
# You should disable bridge -> sync_with_custom_puppets when this is enabled.
ephemeral_events: false
# Authentication tokens for AS <-> HS communication. Autogenerated; do not modify.
as_token: "{{ matrix_beeper_linkedin_appservice_token }}"
hs_token: "{{ matrix_beeper_linkedin_homeserver_token }}"
# Prometheus telemetry config. Requires prometheus-client to be installed.
metrics:
enabled: false
listen_port: 8000
# Manhole config.
manhole:
# Whether or not opening the manhole is allowed.
enabled: false
# The path for the unix socket.
path: /var/tmp/linkedin-matrix.manhole
# The list of UIDs who can be added to the whitelist.
# If empty, any UIDs can be specified in the open-manhole command.
whitelist:
- 0
# Bridge config
bridge:
# Localpart template of MXIDs for LinkedIn users.
username_template: "linkedin_{userid}"
# Displayname template for LinkedIn users.
# Localpart template for per-user room grouping community IDs.
# The bridge will create these communities and add all of the specific user's portals to the community.
# {localpart} is the MXID localpart and {server} is the MXID server part of the user.
# (Note that, by default, non-admins might not have your homeserver's permission to create
# communities. You should set `enable_group_creation: true` in homeserver.yaml to fix this.)
# `linkedin_{localpart}={server}` is a good value.
community_template: null
# Displayname template for LinkedIn users.
# {displayname} is replaced with the display name of the LinkedIn user
# as defined below in displayname_preference.
# Keys available for displayname_preference are also available here.
displayname_template: "{displayname} (LinkedIn)"
# Number of chats to sync (and create portals for) on startup/login.
# Set 0 to disable automatic syncing.
initial_chat_sync: 10
# Whether or not the LinkedIn users of logged in Matrix users should be
# invited to private chats when the user sends a message from another client.
invite_own_puppet_to_pm: false
# Whether or not to use /sync to get presence, read receipts and typing notifications
# when double puppeting is enabled
sync_with_custom_puppets: true
# Whether or not to update the m.direct account data event when double puppeting is enabled.
# Note that updating the m.direct event is not atomic (except with mautrix-asmux)
# and is therefore prone to race conditions.
sync_direct_chat_list: false
# Servers to always allow double puppeting from
double_puppet_server_map: {}
# example.com: https://example.com
# Allow using double puppeting from any server with a valid client .well-known file.
# Maximum number of seconds since last message in chat to skip
# syncing the chat in any case. This setting will take priority
# over both recovery_chat_sync_limit and initial_chat_sync_count.
# Default is 3 days = 259200 seconds
sync_max_chat_age: 259200
# Whether or not to sync with custom puppets to receive EDUs that
# are not normally sent to appservices.
sync_with_custom_puppets: true
# Shared secret for https://github.com/devture/matrix-synapse-shared-secret-auth
#
# If set, custom puppets will be enabled automatically for local users
# instead of users having to find an access token and run `login-matrix`
# manually.
login_shared_secret: {{ matrix_beeper_linkedin_login_shared_secret|to_json }}
# Allow using double puppeting from any server with a valid client .well-known file.
double_puppet_allow_discovery: false
# Whether or not to bridge presence in both directions. LinkedIn allows users not to broadcast
# presence, but then it won't send other users' presence to the client.
presence: {{ matrix_beeper_linkedin_bridge_presence|to_json }}
# Whether or not to update avatars when syncing all contacts at startup.
update_avatar_initial_sync: true
# End-to-bridge encryption support options. These require matrix-nio to be installed with pip
# and login_shared_secret to be configured in order to get a device for the bridge bot.
#
# Additionally, https://github.com/matrix-org/synapse/pull/5758 is required if using a normal
# application service.
encryption:
# Allow encryption, work in group chat rooms with e2ee enabled
allow: false
# Default to encryption, force-enable encryption in all portals the bridge creates
# This will cause the bridge bot to be in private chats for the encryption to work properly.
default: false
# Options for automatic key sharing.
key_sharing:
# Enable key sharing? If enabled, key requests for rooms where users are in will be fulfilled.
# You must use a client that supports requesting keys from other users to use this feature.
allow: false
# Require the requesting device to have a valid cross-signing signature?
# This doesn't require that the bridge has verified the device, only that the user has verified it.
# Not yet implemented.
require_cross_signing: false
# Require devices to be verified by the bridge?
# Verification by the bridge is not yet implemented.
require_verification: true
# Whether or not the bridge should send a read receipt from the bridge bot when a message has
# been sent to LinkedIn.
delivery_receipts: false
# Whether to allow inviting arbitrary mxids to portal rooms
allow_invites: false
# Settings for backfilling messages from LinkedIn.
backfill:
# Whether or not the LinkedIn users of logged in Matrix users should be
# invited to private chats when backfilling history from LinkedIn. This is
# usually needed to prevent rate limits and to allow timestamp massaging.
invite_own_puppet: true
# Maximum number of messages to backfill initially.
# Set to 0 to disable backfilling when creating portal.
initial_limit: 0
# Maximum number of messages to backfill if messages were missed while
# the bridge was disconnected.
# Set to 0 to disable backfilling missed messages.
missed_limit: 1000
# If using double puppeting, should notifications be disabled
# while the initial backfill is in progress?
disable_notifications: false
periodic_reconnect:
# TODO needed?
# Interval in seconds in which to automatically reconnect all users.
# This can be used to automatically mitigate the bug where Linkedin stops sending messages.
# Set to -1 to disable periodic reconnections entirely.
interval: -1
# What to do in periodic reconnects. Either "refresh" or "reconnect"
mode: refresh
# Should even disconnected users be reconnected?
always: false
# The number of seconds that a disconnection can last without triggering an automatic re-sync
# and missed message backfilling when reconnecting.
# Set to 0 to always re-sync, or -1 to never re-sync automatically.
resync_max_disconnected_time: 5
# Whether or not temporary disconnections should send notices to the notice room.
# If this is false, disconnections will never send messages and connections will only send
# messages if it was disconnected for more than resync_max_disconnected_time seconds.
temporary_disconnect_notices: true
# Whether or not the bridge should try to "refresh" the connection if a normal reconnection
# attempt fails.
refresh_on_reconnection_fail: false
# Set this to true to tell the bridge to re-send m.bridge events to all rooms on the next run.
# This field will automatically be changed back to false after it,
# except if the config file is not writable.
resend_bridge_info: false
# When using double puppeting, should muted chats be muted in Matrix?
mute_bridging: false
# Whether or not mute status and tags should only be bridged when the portal room is created.
tag_only_on_create: true
# The prefix for commands. Only required in non-management rooms.
command_prefix: "!li"
# Permissions for using the bridge.
# Permitted values:
# user - Access to use the bridge to chat with a Linkedin account.
# admin - User level and some additional administration tools
# Permitted keys:
# * - All Matrix users
# domain - All users on that homeserver
# mxid - Specific user
permissions:
"{{ matrix_beeper_linkedin_homeserver_domain }}": user
# Logging config.
logging:
version: 1
formatters:
colored:
(): mautrix.util.logging.color.ColorFormatter
format: "[%(asctime)s] [%(levelname)s@%(name)s] %(message)s"
normal:
format: "[%(asctime)s] [%(levelname)s@%(name)s] %(message)s"
handlers:
console:
class: logging.StreamHandler
formatter: colored
loggers:
mau:
level: DEBUG
paho:
level: INFO
aiohttp:
level: INFO
root:
level: DEBUG
handlers: [ console]

View file

@ -0,0 +1,42 @@
#jinja2: lstrip_blocks: "True"
[Unit]
Description=Matrix Beeper Linkedin bridge
{% for service in matrix_beeper_linkedin_systemd_required_services_list %}
Requires={{ service }}
After={{ service }}
{% endfor %}
{% for service in matrix_beeper_linkedin_systemd_wanted_services_list %}
Wants={{ service }}
{% endfor %}
DefaultDependencies=no
[Service]
Type=simple
Environment="HOME={{ matrix_systemd_unit_home_path }}"
ExecStartPre=-{{ matrix_host_command_sh }} -c '{{ matrix_host_command_docker }} kill matrix-beeper-linkedin 2>/dev/null'
ExecStartPre=-{{ matrix_host_command_sh }} -c '{{ matrix_host_command_docker }} rm matrix-beeper-linkedin 2>/dev/null'
# Intentional delay, so that the homeserver (we likely depend on) can manage to start.
ExecStartPre={{ matrix_host_command_sleep }} 5
ExecStart={{ matrix_host_command_docker }} run --rm --name matrix-beeper-linkedin \
--log-driver=none \
--user={{ matrix_user_uid }}:{{ matrix_user_gid }} \
--cap-drop=ALL \
--network={{ matrix_docker_network }} \
-v {{ matrix_beeper_linkedin_config_path }}:/data:z \
--workdir=/opt/linkedin-matrix \
{% for arg in matrix_beeper_linkedin_container_extra_arguments %}
{{ arg }} \
{% endfor %}
{{ matrix_beeper_linkedin_docker_image }} \
python3 -m linkedin_matrix -c /data/config.yaml -r /data/registration.yaml
ExecStop=-{{ matrix_host_command_sh }} -c '{{ matrix_host_command_docker }} kill matrix-beeper-linkedin 2>/dev/null'
ExecStop=-{{ matrix_host_command_sh }} -c '{{ matrix_host_command_docker }} rm matrix-beeper-linkedin 2>/dev/null'
Restart=always
RestartSec=30
SyslogIdentifier=matrix-beeper-linkedin
[Install]
WantedBy=multi-user.target

View file

@ -3,7 +3,7 @@
matrix_heisenbridge_enabled: true
matrix_heisenbridge_version: 1.0.0
matrix_heisenbridge_version: 1.0.1
matrix_heisenbridge_docker_image: "{{ matrix_container_global_registry_prefix }}hif1/heisenbridge:{{ matrix_heisenbridge_version }}"
matrix_heisenbridge_docker_image_force_pull: "{{ matrix_heisenbridge_docker_image.endswith(':latest') }}"

View file

@ -1,14 +1,13 @@
# mautrix-facebook is a Matrix <-> Facebook bridge
# See: https://github.com/tulir/mautrix-facebook
# See: https://github.com/mautrix/facebook
matrix_mautrix_facebook_enabled: true
matrix_mautrix_facebook_container_image_self_build: false
matrix_mautrix_facebook_container_image_self_build_repo: "https://github.com/tulir/mautrix-facebook.git"
matrix_mautrix_facebook_container_image_self_build_repo: "https://mau.dev/mautrix/facebook.git"
matrix_mautrix_facebook_version: latest
# See: https://mau.dev/tulir/mautrix-facebook/container_registry
matrix_mautrix_facebook_docker_image: "{{ matrix_mautrix_facebook_docker_image_name_prefix }}tulir/mautrix-facebook:{{ matrix_mautrix_facebook_version }}"
matrix_mautrix_facebook_version: v0.3.1
matrix_mautrix_facebook_docker_image: "{{ matrix_mautrix_facebook_docker_image_name_prefix }}mautrix/facebook:{{ matrix_mautrix_facebook_version }}"
matrix_mautrix_facebook_docker_image_name_prefix: "{{ 'localhost/' if matrix_mautrix_facebook_container_image_self_build else 'dock.mau.dev/' }}"
matrix_mautrix_facebook_docker_image_force_pull: "{{ matrix_mautrix_facebook_docker_image.endswith(':latest') }}"
@ -107,7 +106,7 @@ matrix_mautrix_facebook_registration_yaml: |
- exclusive: true
regex: '^@{{ matrix_mautrix_facebook_appservice_bot_username|regex_escape }}:{{ matrix_mautrix_facebook_homeserver_domain|regex_escape }}$'
url: {{ matrix_mautrix_facebook_appservice_address }}
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_facebook_appservice_bot_username }}
rate_limited: false
de.sorunome.msc2409.push_ephemeral: true

View file

@ -60,7 +60,7 @@
git:
repo: "{{ matrix_mautrix_facebook_container_image_self_build_repo }}"
dest: "{{ matrix_mautrix_facebook_docker_src_files_path }}"
# version: "{{ matrix_coturn_docker_image.split(':')[1] }}"
version: "{{ matrix_mautrix_facebook_docker_image.split(':')[1] }}"
force: "yes"
register: matrix_mautrix_facebook_git_pull_results
when: "matrix_mautrix_facebook_container_image_self_build|bool"

View file

@ -1,14 +1,14 @@
# mautrix-hangouts is a Matrix <-> Hangouts bridge
# See: https://github.com/tulir/mautrix-hangouts
# See: https://github.com/mautrix/hangouts
matrix_mautrix_hangouts_enabled: true
matrix_mautrix_hangouts_container_image_self_build: false
matrix_mautrix_hangouts_container_image_self_build_repo: "https://github.com/tulir/mautrix-hangouts.git"
matrix_mautrix_hangouts_container_image_self_build_repo: "https://github.com/mautrix/hangouts.git"
matrix_mautrix_hangouts_version: latest
# See: https://mau.dev/tulir/mautrix-hangouts/container_registry
matrix_mautrix_hangouts_docker_image: "{{ matrix_mautrix_hangouts_docker_image_name_prefix }}tulir/mautrix-hangouts:{{ matrix_mautrix_hangouts_version }}"
# See: https://mau.dev/mautrix/hangouts/container_registry
matrix_mautrix_hangouts_docker_image: "{{ matrix_mautrix_hangouts_docker_image_name_prefix }}mautrix/hangouts:{{ matrix_mautrix_hangouts_version }}"
matrix_mautrix_hangouts_docker_image_name_prefix: "{{ 'localhost/' if matrix_mautrix_hangouts_container_image_self_build else 'dock.mau.dev/' }}"
matrix_mautrix_hangouts_docker_image_force_pull: "{{ matrix_mautrix_hangouts_docker_image.endswith(':latest') }}"
@ -107,7 +107,7 @@ matrix_mautrix_hangouts_registration_yaml: |
- exclusive: true
regex: '^@{{ matrix_mautrix_hangouts_appservice_bot_username|regex_escape }}:{{ matrix_mautrix_hangouts_homeserver_domain|regex_escape }}$'
url: {{ matrix_mautrix_hangouts_appservice_address }}
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_hangouts_appservice_bot_username }}
rate_limited: false
de.sorunome.msc2409.push_ephemeral: true

View file

@ -1,14 +1,14 @@
# mautrix-instagram is a Matrix <-> Instagram bridge
# See: https://github.com/tulir/mautrix-instagram
# See: https://github.com/mautrix/instagram
matrix_mautrix_instagram_enabled: true
matrix_mautrix_instagram_container_image_self_build: false
matrix_mautrix_instagram_container_image_self_build_repo: "https://github.com/tulir/mautrix-instagram.git"
matrix_mautrix_instagram_container_image_self_build_repo: "https://github.com/mautrix/instagram.git"
matrix_mautrix_instagram_version: latest
# See: https://mau.dev/tulir/mautrix-instagram/container_registry
matrix_mautrix_instagram_docker_image: "{{ matrix_mautrix_instagram_docker_image_name_prefix }}tulir/mautrix-instagram:{{ matrix_mautrix_instagram_version }}"
matrix_mautrix_instagram_docker_image: "{{ matrix_mautrix_instagram_docker_image_name_prefix }}mautrix/instagram:{{ matrix_mautrix_instagram_version }}"
matrix_mautrix_instagram_docker_image_name_prefix: "{{ 'localhost/' if matrix_mautrix_instagram_container_image_self_build else 'dock.mau.dev/' }}"
matrix_mautrix_instagram_docker_image_force_pull: "{{ matrix_mautrix_instagram_docker_image.endswith(':latest') }}"
@ -97,7 +97,7 @@ matrix_mautrix_instagram_registration_yaml: |
- exclusive: true
regex: '^@{{ matrix_mautrix_instagram_appservice_bot_username|regex_escape }}:{{ matrix_mautrix_instagram_homeserver_domain|regex_escape }}$'
url: {{ matrix_mautrix_instagram_appservice_address }}
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_instagram_appservice_bot_username }}
rate_limited: false
de.sorunome.msc2409.push_ephemeral: true

View file

@ -70,14 +70,30 @@ matrix_mautrix_signal_database_name: 'matrix_mautrix_signal'
matrix_mautrix_signal_database_connection_string: 'postgres://{{ matrix_mautrix_signal_database_username }}:{{ matrix_mautrix_signal_database_password }}@{{ matrix_mautrix_signal_database_hostname }}:{{ matrix_mautrix_signal_database_port }}/{{ matrix_mautrix_signal_database_name }}'
matrix_mautrix_signal_appservice_database: "{{
{
'postgres': matrix_mautrix_signal_database_connection_string,
}[matrix_mautrix_signal_database_engine]
{
'postgres': matrix_mautrix_signal_database_connection_string,
}[matrix_mautrix_signal_database_engine]
}}"
# Can be set to enable automatic double-puppeting via Shared Secret Auth (https://github.com/devture/matrix-synapse-shared-secret-auth).
matrix_mautrix_signal_login_shared_secret: ''
# Enable bridge relay bot functionality
matrix_mautrix_signal_relaybot_enabled: false
# Permissions for using the bridge.
# Permitted values:
# relay - Allowed to be relayed through the bridge, no access to commands.
# user - Use the bridge with puppeting.
# admin - Use and administrate the bridge.
# Permitted keys:
# * - All Matrix users
# domain - All users on that homeserver
# mxid - Specific user
matrix_mautrix_signal_bridge_permissions: |
'*': relay
'{{ matrix_mautrix_signal_homeserver_domain }}': user
# Default configuration template which covers the generic use case.
# You can customize it by controlling the various variables inside it.
#

View file

@ -9,15 +9,12 @@ homeserver:
# Only applies if address starts with https://
verify_ssl: true
asmux: false
<<<<<<< HEAD
=======
# Number of retries for all HTTP requests if the homeserver isn't reachable.
http_retry_count: 4
# The URL to push real-time bridge status to.
# If set, the bridge will make POST requests to this URL whenever a user's Signal connection state changes.
# The bridge will use the appservice as_token to authorize requests.
status_endpoint: null
>>>>>>> upstream/master
# Application service host/registration related details
# Changing these values requires regeneration of the registration.
@ -89,12 +86,9 @@ signal:
avatar_dir: /signald/avatars
# Directory where signald stores auth data. Used to delete data when logging out.
data_dir: /signald/data
<<<<<<< HEAD
=======
# Whether or not unknown signald accounts should be deleted when the bridge is started.
# When this is enabled, any UserInUse errors should be resolved by restarting the bridge.
delete_unknown_accounts_on_start: false
>>>>>>> upstream/master
# Whether or not message attachments should be removed from disk after they're bridged.
remove_file_after_handling: true
@ -146,7 +140,7 @@ bridge:
# If false, created portal rooms will never be federated.
federate_rooms: true
# End-to-bridge encryption support options. You must install the e2be optional dependency for
# this to work. See https://github.com/tulir/mautrix-telegram/wiki/Endtobridge-encryption
# this to work. See https://docs.mau.fi/bridges/general/end-to-bridge-encryption.html
encryption:
# Allow encryption, work in group chat rooms with e2ee enabled
allow: false
@ -179,39 +173,28 @@ bridge:
# This field will automatically be changed back to false after it,
# except if the config file is not writable.
resend_bridge_info: false
<<<<<<< HEAD
=======
# Interval at which to resync contacts.
periodic_sync: 0
>>>>>>> upstream/master
# The prefix for commands. Only required in non-management rooms.
command_prefix: "!signal"
# Permissions for using the bridge.
# Permitted values:
<<<<<<< HEAD
=======
# relay - Allowed to be relayed through the bridge, no access to commands.
>>>>>>> upstream/master
# user - Use the bridge with puppeting.
# admin - Use and administrate the bridge.
# Permitted keys:
# * - All Matrix users
# domain - All users on that homeserver
# mxid - Specific user
permissions:
<<<<<<< HEAD
'{{ matrix_mautrix_signal_homeserver_domain }}': user
=======
'{{ matrix_mautrix_signal_homeserver_domain }}': relay
'{{ matrix_mautrix_signal_homeserver_domain }}': user
permissions:
{{ matrix_mautrix_signal_bridge_permissions|from_yaml }}
relay:
# Whether or not relay mode should be allowed. If allowed, `!signal set-relay` can be used to turn any
# authenticated user into a relaybot for that chat.
enabled: true
enabled: {{ matrix_mautrix_signal_relaybot_enabled }}
# The formats to use when sending messages to Signal via a relay user.
#
# Available variables:
@ -229,7 +212,6 @@ bridge:
m.video: '$sender_displayname sent a video'
m.location: '$sender_displayname sent a location'
>>>>>>> upstream/master
# Python logging configuration.
#

View file

@ -12,7 +12,7 @@ namespaces:
- exclusive: true
regex: '^#signal_.+:{{ matrix_mautrix_signal_homeserver_domain|regex_escape }}$'
url: {{ matrix_mautrix_signal_appservice_address }}
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_signal_appservice_bot_username }}
rate_limited: false
de.sorunome.msc2409.push_ephemeral: true

View file

@ -1,5 +1,5 @@
# mautrix-telegram is a Matrix <-> Telegram bridge
# See: https://github.com/tulir/mautrix-telegram
# See: https://github.com/mautrix/telegram
matrix_mautrix_telegram_enabled: true
@ -10,12 +10,12 @@ matrix_telegram_lottieconverter_docker_src_files_path: "{{ matrix_base_data_path
matrix_telegram_lottieconverter_docker_image: "dock.mau.dev/tulir/lottieconverter:alpine-3.14" # needs to be ajusted according to FROM clause of Dockerfile of mautrix-telegram
matrix_mautrix_telegram_container_self_build: false
matrix_mautrix_telegram_docker_repo: "https://mau.dev/tulir/mautrix-telegram.git"
matrix_mautrix_telegram_docker_repo: "https://mau.dev/mautrix/telegram.git"
matrix_mautrix_telegram_docker_src_files_path: "{{ matrix_base_data_path }}/mautrix-telegram/docker-src"
matrix_mautrix_telegram_version: v0.9.0
# See: https://mau.dev/tulir/mautrix-telegram/container_registry
matrix_mautrix_telegram_docker_image: "dock.mau.dev/tulir/mautrix-telegram:{{ matrix_mautrix_telegram_version }}"
matrix_mautrix_telegram_version: v0.10.1
# See: https://mau.dev/mautrix/telegram/container_registry
matrix_mautrix_telegram_docker_image: "dock.mau.dev/mautrix/telegram:{{ matrix_mautrix_telegram_version }}"
matrix_mautrix_telegram_docker_image_force_pull: "{{ matrix_mautrix_telegram_docker_image.endswith(':latest') }}"
matrix_mautrix_telegram_base_path: "{{ matrix_base_data_path }}/mautrix-telegram"
@ -123,7 +123,7 @@ matrix_mautrix_telegram_registration_yaml: |
aliases:
- exclusive: true
regex: '^#telegram_.+:{{ matrix_mautrix_telegram_homeserver_domain|regex_escape }}$'
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_telegram_appservice_bot_username }}
url: {{ matrix_mautrix_telegram_appservice_address }}
rate_limited: false

View file

@ -1,10 +1,10 @@
# mautrix-whatsapp is a Matrix <-> Whatsapp bridge
# See: https://github.com/tulir/mautrix-whatsapp
# See: https://github.com/mautrix/whatsapp
matrix_mautrix_whatsapp_enabled: true
matrix_mautrix_whatsapp_version: latest
# See: https://mau.dev/tulir/mautrix-whatsapp/container_registry
# See: https://mau.dev/mautrix/whatsapp/container_registry
matrix_mautrix_whatsapp_docker_image: "dock.mau.dev/mautrix/whatsapp:{{ matrix_mautrix_whatsapp_version }}"
matrix_mautrix_whatsapp_docker_image_force_pull: "{{ matrix_mautrix_whatsapp_docker_image.endswith(':latest') }}"
@ -96,7 +96,7 @@ matrix_mautrix_whatsapp_registration_yaml: |
url: {{ matrix_mautrix_whatsapp_appservice_address }}
as_token: "{{ matrix_mautrix_whatsapp_appservice_token }}"
hs_token: "{{ matrix_mautrix_whatsapp_homeserver_token }}"
# See https://github.com/tulir/mautrix-signal/issues/43
# See https://github.com/mautrix/signal/issues/43
sender_localpart: _bot_{{ matrix_mautrix_whatsapp_appservice_bot_username }}
rate_limited: false
namespaces:

View file

@ -3,11 +3,7 @@ matrix_client_element_enabled: true
matrix_client_element_container_image_self_build: false
matrix_client_element_container_image_self_build_repo: "https://github.com/vector-im/riot-web.git"
<<<<<<< HEAD
matrix_client_element_version: v1.7.34
=======
matrix_client_element_version: v1.8.0
>>>>>>> upstream/master
matrix_client_element_version: v1.8.2
matrix_client_element_docker_image: "{{ matrix_client_element_docker_image_name_prefix }}vectorim/element-web:{{ matrix_client_element_version }}"
matrix_client_element_docker_image_name_prefix: "{{ 'localhost/' if matrix_client_element_container_image_self_build else matrix_container_global_registry_prefix }}"
matrix_client_element_docker_image_force_pull: "{{ matrix_client_element_docker_image.endswith(':latest') }}"

View file

@ -5,7 +5,7 @@ matrix_client_hydrogen_enabled: true
matrix_client_hydrogen_container_image_self_build: true
matrix_client_hydrogen_container_image_self_build_repo: "https://github.com/vector-im/hydrogen-web.git"
matrix_client_hydrogen_version: v0.2.5
matrix_client_hydrogen_version: v0.2.7
matrix_client_hydrogen_docker_image: "{{ matrix_client_hydrogen_docker_image_name_prefix }}vectorim/hydrogen-web:{{ matrix_client_hydrogen_version }}"
matrix_client_hydrogen_docker_image_name_prefix: "{{ 'localhost/' if matrix_client_hydrogen_container_image_self_build }}"
matrix_client_hydrogen_docker_image_force_pull: "{{ matrix_client_hydrogen_docker_image.endswith(':latest') }}"

View file

@ -33,6 +33,17 @@
register: matrix_client_hydrogen_git_pull_results
when: "matrix_client_hydrogen_enabled|bool and matrix_client_hydrogen_container_image_self_build|bool"
- name: Ensure Hydrogen Docker image is built
docker_image:
name: "{{ matrix_client_hydrogen_docker_image }}"
source: build
force_source: "{{ matrix_client_hydrogen_git_pull_results.changed }}"
build:
dockerfile: Dockerfile
path: "{{ matrix_client_hydrogen_docker_src_files_path }}"
pull: yes
when: "matrix_client_hydrogen_enabled|bool and matrix_client_hydrogen_container_image_self_build|bool"
- name: Ensure Hydrogen configuration installed
copy:
content: "{{ matrix_client_hydrogen_configuration|to_nice_json }}"
@ -53,17 +64,6 @@
- {src: "{{ role_path }}/templates/nginx.conf.j2", name: "nginx.conf"}
when: "matrix_client_hydrogen_enabled|bool and item.src is not none"
- name: Ensure Hydrogen Docker image is built
docker_image:
name: "{{ matrix_client_hydrogen_docker_image }}"
source: build
force_source: "{{ matrix_client_hydrogen_git_pull_results.changed }}"
build:
dockerfile: Dockerfile
path: "{{ matrix_client_hydrogen_docker_src_files_path }}"
pull: yes
when: "matrix_client_hydrogen_enabled|bool and matrix_client_hydrogen_container_image_self_build|bool"
- name: Ensure matrix-client-hydrogen.service installed
template:
src: "{{ role_path }}/templates/systemd/matrix-client-hydrogen.service.j2"

View file

@ -22,7 +22,7 @@ matrix_corporal_container_extra_arguments: []
# List of systemd services that matrix-corporal.service depends on
matrix_corporal_systemd_required_services_list: ['docker.service']
matrix_corporal_version: 2.1.1
matrix_corporal_version: 2.1.2
matrix_corporal_docker_image: "{{ matrix_corporal_docker_image_name_prefix }}devture/matrix-corporal:{{ matrix_corporal_docker_image_tag }}"
matrix_corporal_docker_image_name_prefix: "{{ 'localhost/' if matrix_corporal_container_image_self_build else matrix_container_global_registry_prefix }}"
matrix_corporal_docker_image_tag: "{{ matrix_corporal_version }}" # for backward-compatibility

View file

@ -5,7 +5,7 @@ matrix_coturn_container_image_self_build_repo: "https://github.com/coturn/coturn
matrix_coturn_container_image_self_build_repo_version: "docker/{{ matrix_coturn_version }}"
matrix_coturn_container_image_self_build_repo_dockerfile_path: "docker/coturn/alpine/Dockerfile"
matrix_coturn_version: 4.5.2-r2
matrix_coturn_version: 4.5.2-r4
matrix_coturn_docker_image: "{{ matrix_coturn_docker_image_name_prefix }}coturn/coturn:{{ matrix_coturn_version }}-alpine"
matrix_coturn_docker_image_name_prefix: "{{ 'localhost/' if matrix_coturn_container_image_self_build else matrix_container_global_registry_prefix }}"
matrix_coturn_docker_image_force_pull: "{{ matrix_coturn_docker_image.endswith(':latest') }}"

View file

@ -3,7 +3,7 @@
matrix_grafana_enabled: false
matrix_grafana_version: 8.0.6
matrix_grafana_version: 8.1.2
matrix_grafana_docker_image: "{{ matrix_container_global_registry_prefix }}grafana/grafana:{{ matrix_grafana_version }}"
matrix_grafana_docker_image_force_pull: "{{ matrix_grafana_docker_image.endswith(':latest') }}"

View file

@ -7,6 +7,7 @@ matrix_jitsi_enable_guests: false
matrix_jitsi_enable_recording: false
matrix_jitsi_enable_transcriptions: false
matrix_jitsi_enable_p2p: true
matrix_jitsi_enable_av_moderation: true
# Authentication type, must be one of internal, jwt or ldap. Currently only
# internal and ldap are supported by this playbook.
@ -53,7 +54,7 @@ matrix_jitsi_jibri_recorder_password: ''
matrix_jitsi_enable_lobby: false
matrix_jitsi_version: stable-5963
matrix_jitsi_version: stable-6173
matrix_jitsi_container_image_tag: "{{ matrix_jitsi_version }}" # for backward-compatibility
matrix_jitsi_web_docker_image: "{{ matrix_container_global_registry_prefix }}jitsi/web:{{ matrix_jitsi_container_image_tag }}"
@ -69,6 +70,14 @@ matrix_jitsi_web_public_url: "https://{{ matrix_server_fqn_jitsi }}"
# Addresses need to be prefixed with one of `stun:`, `turn:` or `turns:`.
matrix_jitsi_web_stun_servers: ['stun:meet-jit-si-turnrelay.jitsi.net:443']
# Setting up TURN
# Default set with Coturn container
matrix_jitsi_turn_credentials: "{{ matrix_coturn_turn_static_auth_secret }}"
matrix_jitsi_turn_host: "turn.{{ matrix_server_fqn_matrix }}"
matrix_jitsi_turns_host: "turn.{{ matrix_server_fqn_matrix }}"
matrix_jitsi_turn_port: "{{ matrix_coturn_container_stun_plain_host_bind_port }}"
matrix_jitsi_turns_port: "{{ matrix_coturn_container_stun_tls_host_bind_port }}"
# Controls whether Etherpad will be available within Jitsi
matrix_jitsi_etherpad_enabled: false

View file

@ -2,6 +2,7 @@ AUTH_TYPE={{ matrix_jitsi_auth_type }}
ENABLE_AUTH={{ 1 if matrix_jitsi_enable_auth else 0 }}
ENABLE_GUESTS={{ 1 if matrix_jitsi_enable_guests else 0 }}
ENABLE_LOBBY={{ 1 if matrix_jitsi_enable_lobby else 0 }}
ENABLE_AV_MODERATION={{1 if matrix_jitsi_enable_av_moderation else 0}}
ENABLE_XMPP_WEBSOCKET
GLOBAL_MODULES
GLOBAL_CONFIG
@ -48,4 +49,9 @@ JWT_AUTH_TYPE
JWT_TOKEN_AUTH_MODULE
LOG_LEVEL
PUBLIC_URL={{ matrix_jitsi_web_public_url }}
TURN_CREDENTIALS={{ matrix_jitsi_turn_credentials }}
TURN_HOST={{ matrix_jitsi_turn_host }}
TURNS_HOST={{ matrix_jitsi_turns_host }}
TURN_PORT={{ matrix_jitsi_turn_port }}
TURNS_PORT={{ matrix_jitsi_turns_port }}
TZ={{ matrix_jitsi_timezone }}

View file

@ -7,7 +7,7 @@ matrix_mailer_container_image_self_build_repository_url: "https://github.com/dev
matrix_mailer_container_image_self_build_src_files_path: "{{ matrix_mailer_base_path }}/docker-src"
matrix_mailer_container_image_self_build_version: "{{ matrix_mailer_docker_image.split(':')[1] }}"
matrix_mailer_version: 4.94.2-r0-2
matrix_mailer_version: 4.94.2-r0-4
matrix_mailer_docker_image: "{{ matrix_mailer_docker_image_name_prefix }}devture/exim-relay:{{ matrix_mailer_version }}"
matrix_mailer_docker_image_name_prefix: "{{ 'localhost/' if matrix_mailer_container_image_self_build else matrix_container_global_registry_prefix }}"
matrix_mailer_docker_image_force_pull: "{{ matrix_mailer_docker_image.endswith(':latest') }}"

View file

@ -282,6 +282,23 @@ matrix_nginx_proxy_proxy_sygnal_additional_server_configuration_blocks: []
# A list of strings containing additional configuration blocks to add to the base domain server configuration (matrix-base-domain.conf).
matrix_nginx_proxy_proxy_domain_additional_server_configuration_blocks: []
# To increase request timeout in NGINX using proxy_read_timeout, proxy_connect_timeout, proxy_send_timeout, send_timeout directives
# Nginx Default: proxy_connect_timeout 60s; #Defines a timeout for establishing a connection with a proxied server
# Nginx Default: proxy_send_timeout 60s; #Sets a timeout for transmitting a request to the proxied server.
# Nginx Default: proxy_read_timeout 60s; #Defines a timeout for reading a response from the proxied server.
# Nginx Default: send_timeout 60s; #Sets a timeout for transmitting a response to the client.
#
# For more information visit:
# http://nginx.org/en/docs/http/ngx_http_proxy_module.html
# http://nginx.org/en/docs/http/ngx_http_core_module.html#send_timeout
# https://www.nginx.com/resources/wiki/start/topics/examples/fullexample2/
#
# Here we are sticking with nginx default values change this value carefully.
matrix_nginx_proxy_connect_timeout: 60
matrix_nginx_proxy_send_timeout: 60
matrix_nginx_proxy_read_timeout: 60
matrix_nginx_send_timeout: 60
# Controls whether to send a "Permissions-Policy interest-cohort=();" header along with all responses for all vhosts meant to be accessed by users.
#
# Learn more about what it is here:
@ -409,7 +426,7 @@ matrix_ssl_additional_domains_to_obtain_certificates_for: []
# Controls whether to obtain production or staging certificates from Let's Encrypt.
matrix_ssl_lets_encrypt_staging: false
matrix_ssl_lets_encrypt_certbot_docker_image: "{{ matrix_container_global_registry_prefix }}certbot/certbot:{{ matrix_ssl_architecture }}-v1.17.0"
matrix_ssl_lets_encrypt_certbot_docker_image: "{{ matrix_container_global_registry_prefix }}certbot/certbot:{{ matrix_ssl_architecture }}-v1.18.0"
matrix_ssl_lets_encrypt_certbot_docker_image_force_pull: "{{ matrix_ssl_lets_encrypt_certbot_docker_image.endswith(':latest') }}"
matrix_ssl_lets_encrypt_certbot_standalone_http_port: 2402
matrix_ssl_lets_encrypt_support_email: ~

View file

@ -42,6 +42,11 @@ http {
{% else %}
access_log off;
{% endif %}
proxy_connect_timeout {{ matrix_nginx_proxy_connect_timeout }};
proxy_send_timeout {{ matrix_nginx_proxy_send_timeout }};
proxy_read_timeout {{ matrix_nginx_proxy_read_timeout }};
send_timeout {{ matrix_nginx_send_timeout }};
sendfile on;
#tcp_nopush on;

View file

@ -17,11 +17,11 @@ matrix_postgres_architecture: amd64
# > LOG: startup process (PID 37) was terminated by signal 11: Segmentation fault
matrix_postgres_docker_image_suffix: "{{ '-alpine' if matrix_postgres_architecture in ['amd64', 'arm64'] else '' }}"
matrix_postgres_docker_image_v9: "{{ matrix_container_global_registry_prefix }}postgres:9.6.22{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v10: "{{ matrix_container_global_registry_prefix }}postgres:10.17{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v11: "{{ matrix_container_global_registry_prefix }}postgres:11.12{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v12: "{{ matrix_container_global_registry_prefix }}postgres:12.7{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v13: "{{ matrix_container_global_registry_prefix }}postgres:13.3{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v9: "{{ matrix_container_global_registry_prefix }}postgres:9.6.23{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v10: "{{ matrix_container_global_registry_prefix }}postgres:10.18{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v11: "{{ matrix_container_global_registry_prefix }}postgres:11.13{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v12: "{{ matrix_container_global_registry_prefix }}postgres:12.8{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_v13: "{{ matrix_container_global_registry_prefix }}postgres:13.4{{ matrix_postgres_docker_image_suffix }}"
matrix_postgres_docker_image_latest: "{{ matrix_postgres_docker_image_v13 }}"
# This variable is assigned at runtime. Overriding its value has no effect.

View file

@ -3,7 +3,7 @@
matrix_prometheus_node_exporter_enabled: false
matrix_prometheus_node_exporter_version: v1.2.0
matrix_prometheus_node_exporter_version: v1.2.2
matrix_prometheus_node_exporter_docker_image: "{{ matrix_container_global_registry_prefix }}prom/node-exporter:{{ matrix_prometheus_node_exporter_version }}"
matrix_prometheus_node_exporter_docker_image_force_pull: "{{ matrix_prometheus_node_exporter_docker_image.endswith(':latest') }}"

View file

@ -3,7 +3,7 @@
matrix_prometheus_postgres_exporter_enabled: false
matrix_prometheus_postgres_exporter_version: v0.9.0
matrix_prometheus_postgres_exporter_version: v0.10.0
matrix_prometheus_postgres_exporter_port: 9187
matrix_prometheus_postgres_exporter_docker_image: "quay.io/prometheuscommunity/postgres-exporter:{{ matrix_prometheus_postgres_exporter_version }}"

View file

@ -3,7 +3,7 @@
matrix_prometheus_enabled: false
matrix_prometheus_version: v2.28.1
matrix_prometheus_version: v2.29.2
matrix_prometheus_docker_image: "{{ matrix_container_global_registry_prefix }}prom/prometheus:{{ matrix_prometheus_version }}"
matrix_prometheus_docker_image_force_pull: "{{ matrix_prometheus_docker_image.endswith(':latest') }}"

View file

@ -7,7 +7,7 @@ matrix_sygnal_base_path: "{{ matrix_base_data_path }}/sygnal"
matrix_sygnal_config_path: "{{ matrix_sygnal_base_path }}/config"
matrix_sygnal_data_path: "{{ matrix_sygnal_base_path }}/data"
matrix_sygnal_version: v0.9.0
matrix_sygnal_version: v0.10.1
matrix_sygnal_docker_image: "{{ matrix_container_global_registry_prefix }}matrixdotorg/sygnal:{{ matrix_sygnal_version }}"
matrix_sygnal_docker_image_force_pull: "{{ matrix_sygnal_docker_image.endswith(':latest') }}"
@ -25,26 +25,6 @@ matrix_sygnal_container_http_host_bind_port: ''
# A list of extra arguments to pass to the container
matrix_sygnal_container_extra_arguments: []
# Database-related configuration fields.
#
# To use SQLite, stick to these defaults.
#
# To use Postgres:
# - change the engine (`matrix_sygnal_database_engine: 'postgres'`)
# - adjust your database credentials via the `matrix_sygnal_postgres_*` variables
matrix_sygnal_database_engine: 'sqlite'
matrix_sygnal_sqlite_database_path_local: "{{ matrix_sygnal_data_path }}/sygnal.db"
matrix_sygnal_sqlite_database_path_in_container: "/data/sygnal.db"
matrix_sygnal_database_username: 'matrix_sygnal'
matrix_sygnal_database_password: 'some-password'
matrix_sygnal_database_hostname: 'matrix-postgres'
matrix_sygnal_database_port: 5432
matrix_sygnal_database_name: 'matrix_sygnal'
matrix_sygnal_database_connection_string: 'postgres://{{ matrix_sygnal_database_username }}:{{ matrix_sygnal_database_password }}@{{ matrix_sygnal_database_hostname }}:{{ matrix_sygnal_database_port }}/{{ matrix_sygnal_database_name }}'
# A map (dictionary) of apps instances that this server works with.
#
# Example configuration:

View file

@ -1,32 +1,5 @@
---
- set_fact:
matrix_sygnal_requires_restart: false
- block:
- name: Check if an SQLite database already exists
stat:
path: "{{ matrix_sygnal_sqlite_database_path_local }}"
register: matrix_sygnal_sqlite_database_path_local_stat_result
- block:
- set_fact:
matrix_postgres_db_migration_request:
src: "{{ matrix_sygnal_sqlite_database_path_local }}"
dst: "{{ matrix_sygnal_database_connection_string }}"
caller: "{{ role_path|basename }}"
engine_variable_name: 'matrix_sygnal_database_engine'
engine_old: 'sqlite'
systemd_services_to_stop: ['matrix-sygnal.service']
pgloader_options: ['--with "quote identifiers"']
- import_tasks: "{{ role_path }}/../matrix-postgres/tasks/util/migrate_db_to_postgres.yml"
- set_fact:
matrix_sygnal_requires_restart: true
when: "matrix_sygnal_sqlite_database_path_local_stat_result.stat.exists|bool"
when: "matrix_sygnal_database_engine == 'postgres'"
- name: Ensure Sygnal image is pulled
docker_image:
name: "{{ matrix_sygnal_docker_image }}"
@ -65,9 +38,3 @@
service:
daemon_reload: yes
when: "matrix_sygnal_systemd_service_result.changed|bool"
- name: Ensure matrix-sygnal.service restarted, if necessary
service:
name: "matrix-sygnal.service"
state: restarted
when: "matrix_sygnal_requires_restart|bool"

View file

@ -3,11 +3,3 @@
msg: >-
Enabling Sygnal requires that you specify at least one app in `matrix_sygnal_apps`
when: "matrix_sygnal_enabled and matrix_sygnal_apps|length == 0"
- name: Fail if running on a non-supported architecture
fail:
msg: >-
Sygnal can only be used on the amd64 architecture for now.
Only amd64 container images are pushed for the `docker.io/matrixdotorg/sygnal` container image.
Either use a different image (by redefining `matrix_sygnal_docker_image`) or consider contributing self-building support to this role.
when: "matrix_sygnal_enabled and matrix_architecture != 'amd64' and matrix_sygnal_docker_image.startswith('docker.io/matrixdotorg/sygnal')"

View file

@ -3,57 +3,6 @@
# See: matrix.org
##
# The 'database' setting defines the database that sygnal uses to store all of
# its data.
#
# 'name' gives the database engine to use: either 'sqlite3' (for SQLite) or
# 'psycopg2' (for PostgreSQL).
#
# 'args' gives options which are passed through to the database engine,
# except for options starting 'cp_', which are used to configure the Twisted
# connection pool. For a reference to valid arguments, see:
# * for sqlite: https://docs.python.org/3/library/sqlite3.html#sqlite3.connect
# * for postgres: https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS
# * for the connection pool: https://twistedmatrix.com/documents/current/api/twisted.enterprise.adbapi.ConnectionPool.html#__init__
#
#
# Example SQLite configuration:
#
#database:
# name: sqlite3
# args:
# dbfile: /path/to/database.db
#
#
# Example Postgres configuration:
#
#database:
# name: psycopg2
# args:
# host: localhost
# database: sygnal
# user: sygnal
# password: pass
# cp_min: 1
# cp_max: 5
#
{% if matrix_sygnal_database_engine == 'sqlite' %}
database:
name: sqlite3
args:
dbfile: {{ matrix_sygnal_sqlite_database_path_in_container|to_json }}
{% else %}
database:
name: psycopg2
args:
host: {{ matrix_sygnal_database_hostname|to_json }}
database: {{ matrix_sygnal_database_name|to_json }}
user: {{ matrix_sygnal_database_username|to_json }}
password: {{ matrix_sygnal_database_password|to_json }}
cp_min: 1
cp_max: 5
{% endif %}
## Logging #
#
log:

View file

@ -16,6 +16,7 @@
git:
repo: "{{ matrix_synapse_admin_container_self_build_repo }}"
dest: "{{ matrix_synapse_admin_docker_src_files_path }}"
version: "{{ matrix_synapse_admin_docker_image.split(':')[1] }}"
force: "yes"
register: matrix_synapse_admin_git_pull_results
when: "matrix_synapse_admin_enabled|bool and matrix_synapse_admin_container_self_build|bool"

View file

@ -15,13 +15,8 @@ matrix_synapse_docker_image_name_prefix: "{{ 'localhost/' if matrix_synapse_cont
# amd64 gets released first.
# arm32 relies on self-building, so the same version can be built immediately.
# arm64 users need to wait for a prebuilt image to become available.
<<<<<<< HEAD
matrix_synapse_version: v1.39.0
matrix_synapse_version_arm64: v1.39.0
=======
matrix_synapse_version: v1.40.0
matrix_synapse_version_arm64: v1.40.0
>>>>>>> upstream/master
matrix_synapse_version: v1.41.1
matrix_synapse_version_arm64: v1.41.1
matrix_synapse_docker_image_tag: "{{ matrix_synapse_version if matrix_architecture in ['arm32', 'amd64'] else matrix_synapse_version_arm64 }}"
matrix_synapse_docker_image_force_pull: "{{ matrix_synapse_docker_image.endswith(':latest') }}"
@ -458,10 +453,7 @@ matrix_synapse_replication_http_port: 9093
matrix_synapse_sentry_dsn: ""
# Postgres database information
<<<<<<< HEAD
=======
matrix_synapse_database_txn_limit: 0
>>>>>>> upstream/master
matrix_synapse_database_host: "matrix-postgres"
matrix_synapse_database_port: 5432
matrix_synapse_database_user: "synapse"
@ -478,6 +470,7 @@ matrix_synapse_email_smtp_port: 587
matrix_synapse_email_smtp_require_transport_security: false
matrix_synapse_email_notif_from: "Matrix <matrix@{{ matrix_domain }}>"
matrix_synapse_email_client_base_url: "https://{{ matrix_server_fqn_element }}"
matrix_synapse_email_invite_client_location: "https://app.element.io"
# Enable this to activate the REST auth password provider module.

View file

@ -185,6 +185,8 @@ default_room_version: {{ matrix_synapse_default_room_version|to_json }}
#
# This option replaces federation_ip_range_blacklist in Synapse v1.25.0.
#
# Note: The value is ignored when an HTTP proxy is in use
#
#ip_range_blacklist:
# - '127.0.0.0/8'
# - '10.0.0.0/8'
@ -583,6 +585,19 @@ retention:
#
#next_link_domain_whitelist: ["matrix.org"]
# Templates to use when generating email or HTML page contents.
#
templates:
# Directory in which Synapse will try to find template files to use to generate
# email or HTML page contents.
# If not set, or a file is not found within the template directory, a default
# template from within the Synapse package will be used.
#
# See https://matrix-org.github.io/synapse/latest/templates.html for more
# information about using custom templates.
#
#custom_template_directory: /path/to/custom/templates/
## TLS ##
@ -729,14 +744,24 @@ caches:
per_cache_factors:
#get_users_who_share_room_with_user: 2.0
# Controls how long an entry can be in a cache without having been
# accessed before being evicted. Defaults to None, which means
# entries are never evicted based on time.
#
#expiry_time: 30m
# Controls how long the results of a /sync request are cached for after
# a successful response is returned. A higher duration can help clients with
# intermittent connections, at the cost of higher memory usage.
#
# By default, this is zero, which means that sync responses are not cached
# at all.
#
#sync_response_cache_duration: 2m
## Database ##
<<<<<<< HEAD
database:
# The database engine name
name: "psycopg2"
=======
# The 'database' setting defines the database that synapse uses to store all of
# its data.
#
@ -783,7 +808,6 @@ database:
# The database engine name
name: "psycopg2"
txn_limit: {{ matrix_synapse_database_txn_limit }}
>>>>>>> upstream/master
args:
user: {{ matrix_synapse_database_user|string|to_json }}
password: {{ matrix_synapse_database_password|string|to_json }}
@ -1002,6 +1026,8 @@ url_preview_enabled: {{ matrix_synapse_url_preview_enabled|to_json }}
# This must be specified if url_preview_enabled is set. It is recommended that
# you uncomment the following list as a starting point.
#
# Note: The value is ignored when an HTTP proxy is in use
#
url_preview_ip_range_blacklist:
- '127.0.0.0/8'
- '10.0.0.0/8'
@ -1930,6 +1956,9 @@ cas_config:
# Additional settings to use with single-sign on systems such as OpenID Connect,
# SAML2 and CAS.
#
# Server admins can configure custom templates for pages related to SSO. See
# https://matrix-org.github.io/synapse/latest/templates.html for more information.
#
sso:
# A list of client URLs which are whitelisted so that the user does not
# have to confirm giving access to their account to the URL. Any client
@ -2256,6 +2285,9 @@ ui_auth:
{% if matrix_synapse_email_enabled %}
# Configuration for sending emails from Synapse.
#
# Server admins can configure custom templates for email content. See
# https://matrix-org.github.io/synapse/latest/templates.html for more information.
#
email:
# The hostname of the outgoing SMTP server to use. Defaults to 'localhost'.
#
@ -2281,10 +2313,13 @@ email:
#require_transport_security: true
require_transport_security: {{ matrix_synapse_email_smtp_require_transport_security|to_json }}
# Enable sending emails for messages that the user has missed
# Uncomment the following to disable TLS for SMTP.
#
#enable_notifs: false
enable_notifs: true
# By default, if the server supports TLS, it will be used, and the server
# must present a certificate that is valid for 'smtp_host'. If this option
# is set to false, TLS will not be used.
#
#enable_tls: false
# notif_from defines the "From" address to use when sending emails.
# It must be set if email sending is enabled.
@ -2305,6 +2340,11 @@ email:
#app_name: my_branded_matrix_server
app_name: Matrix
# Enable sending emails for messages that the user has missed
#
#enable_notifs: false
enable_notifs: true
# Uncomment the following to disable automatic subscription to email
# notifications for new users. Enabled by default.
#
@ -2325,48 +2365,11 @@ email:
#
#validation_token_lifetime: 15m
# Directory in which Synapse will try to find the template files below.
# If not set, or the files named below are not found within the template
# directory, default templates from within the Synapse package will be used.
# The web client location to direct users to during an invite. This is passed
# to the identity server as the org.matrix.web_client_location key. Defaults
# to unset, giving no guidance to the identity server.
#
# Synapse will look for the following templates in this directory:
#
# * The contents of email notifications of missed events: 'notif_mail.html' and
# 'notif_mail.txt'.
#
# * The contents of account expiry notice emails: 'notice_expiry.html' and
# 'notice_expiry.txt'.
#
# * The contents of password reset emails sent by the homeserver:
# 'password_reset.html' and 'password_reset.txt'
#
# * An HTML page that a user will see when they follow the link in the password
# reset email. The user will be asked to confirm the action before their
# password is reset: 'password_reset_confirmation.html'
#
# * HTML pages for success and failure that a user will see when they confirm
# the password reset flow using the page above: 'password_reset_success.html'
# and 'password_reset_failure.html'
#
# * The contents of address verification emails sent during registration:
# 'registration.html' and 'registration.txt'
#
# * HTML pages for success and failure that a user will see when they follow
# the link in an address verification email sent during registration:
# 'registration_success.html' and 'registration_failure.html'
#
# * The contents of address verification emails sent when an address is added
# to a Matrix account: 'add_threepid.html' and 'add_threepid.txt'
#
# * HTML pages for success and failure that a user will see when they follow
# the link in an address verification email sent when an address is added
# to a Matrix account: 'add_threepid_success.html' and
# 'add_threepid_failure.html'
#
# You can see the default templates at:
# https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
#
#template_dir: "res/templates"
invite_client_location: {{ matrix_synapse_email_invite_client_location|string|to_json }}
# Subjects to use when sending emails from Synapse.
#

View file

@ -37,6 +37,7 @@ matrix_synapse_workers_generic_worker_endpoints:
- ^/_matrix/federation/v1/send/
# Client API requests
- ^/_matrix/client/(api/v1|r0|unstable)/createRoom$
- ^/_matrix/client/(api/v1|r0|unstable)/publicRooms$
- ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/joined_members$
- ^/_matrix/client/(api/v1|r0|unstable)/rooms/.*/context/.*$
@ -253,10 +254,12 @@ matrix_synapse_workers_media_repository_endpoints:
- ^/_synapse/admin/v1/user/.*/media.*$
- ^/_synapse/admin/v1/media/.*$
- ^/_synapse/admin/v1/quarantine_media/.*$
- ^/_synapse/admin/v1/users/.*/media$
# You should also set `enable_media_repo: False` in the shared configuration
# file to stop the main synapse running background jobs related to managing the
# media repository.
# media repository. Note that doing so will prevent the main process from being
# able to handle the above endpoints.
# In the `media_repository` worker configuration file, configure the http listener to
# expose the `media` resource. For example:

View file

@ -18,6 +18,7 @@
- matrix-bridge-appservice-slack
- matrix-bridge-appservice-webhooks
- matrix-bridge-appservice-irc
- matrix-bridge-beeper-linkedin
- matrix-bridge-mautrix-facebook
- matrix-bridge-mautrix-hangouts
- matrix-bridge-mautrix-instagram
@ -55,8 +56,4 @@
- matrix-aux
- matrix-postgres-backup
- matrix-prometheus-postgres-exporter
<<<<<<< HEAD
- matrix-common-after
=======
- matrix-common-after
>>>>>>> upstream/master