Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/756
Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/737
I feel like timers are somewhat more complicated and dirty (compared to
cronjobs), but they come with these benefits:
- log output goes to journald
- on newer systemd distros, you can see when the timer fired, when it
will fire, etc.
- we don't need to rely on cron (reducing our dependencies to just
systemd + Docker)
Cronjobs work well, but it's one more dependency that needs to be
installed. We were even asking people to install it manually
(in `docs/prerequisites.md`), which could have gone unnoticed.
Once in a while someone says "my SSL certificates didn't renew"
and it's likely because they forgot to install a cron daemon.
Switching to systemd timers means that installation is simpler
and more unified.
This reverts commit 2a25b63bb6.
Looking at other roles, we trigger building regardless of this.
It's better to always trigger it, because it's less fragile.
If the build fails and we only trigger it on "git changes"
then we won't trigger it for a while. That's not good.
Triggering it each and every time may seem like a waste,
but it supposedly runs quickly due to Docker caching.
This variable has been useless since 2019-01-08.
We probably don't need to check for its usage anymore,
given how much time has passed since then, but ..
Before we potentially clone to that path, we'd better make sure it exists.
We also simplify `when` statements a bit.
Given that we're in `setup_install.yml`, we know that the bridge is enabled,
so there's no need to check for that.
Not sure if it breaks with them or not, but no other directive
uses quotes and the nginx docs show examples without quotes,
so we're being consistent with all of that.
The different configurations are now all lower case, for consistent
naming.
`matrix_nginx_proxy_ssl_config` is now called
`matrix_nginx_proxy_ssl_preset`. The different options for "modern",
"intermediate" and "old" are stored in the main.yml file, instead of
being hardcoded in the configuration files. This will improve the
maintainability of the code.
The "custom" preset was removed. Now if one of the variables is set, it
will use it instead of the preset. This will allow to mix and match more
easily, for example using all the intermediate options but only
supporting TLSv1.2. This will also provide better backward
compatibility.
While it's kind of nice having it, it's also somewhat raw
and unnecessary.
Having a good default and not even mentioning it seems better
for most users.
People who need a more exposed bridge (rare) can use
override the default configuration using
`matrix_mautrix_signal_configuration_extension_yaml`.
The answer to these is: it's good to have them in both places.
The role defines the obvious things it depends on (not knowing
what setup it will find itself into), and then
`group_vars/matrix_servers` "extends" it based on everything else it
knows (the homeserver being Synapse, whether or not the internal
Postgres server is being used, etc.)
We need to suppress systemd service-stopping requests in certain rare
cases like https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/771
That issue seems to describe a case, where a migration from mxisd to
ma1sd was happening (DB files had just been moved), and then we were
attemping to stop `matrix-ma1sd.service` so we could import that database into
Postgres. However, there's neither `matrix-mxisd.service`, nor
`matrix-ma1sd.service` after `migrate_mxisd.yml` had just run, so
stopping `matrix-ma1sd.service` was failing.
Fixes a problem like this:
> File "/usr/lib/python3.8/site-packages/mautrix/bridge/e2ee.py", line 79, in __init__
> raise RuntimeError("Unsupported database scheme")
mautrix-python's e2ee.py module expects to find `postgres://` instead of
`postgresql://`.
Our old (base-path -> data-path) SQLite migration can't work otherwise.
It's probably not necessary to keep it anymore, but since we still do,
at least we should take care to ensure it works.
Raspbian doesn't seem to support arm64, so this is somewhat pointless
right now.
However, they might in the future. Doing this should also unify us
some more with `setup_debian.yml` with the ultimate goal of
eliminating `setup_raspbian.yml`.
Until now, we've only supported non-amd64 on Raspbian.
Seems like there are now people running Debian/Ubuntu on ARM,
so we were forcing them into amd64 Docker packages.
I've gotten a report that this change fixes support
for Ubuntu Server 20.04 on RPi 4B.
A new variable called `matrix_nginx_proxy_ssl_config` is created for
configuring how the nginx proxy configures SSL. Also a new configuration
validation option and other auxiliary variables are created.
A new variable configuration called `matrix_nginx_proxy_ssl_config` is
created. This allow to set the SSL configuration easily using the
default options proposed by Mozilla. The default configuration is set to
"Intermediate", removing the weak ciphers used in the old
configurations.
The new variable can also be set to "Custom" for a more granular control.
This allows to set another three variables called:
- `matrix_nginx_proxy_ssl_protocols`,
- `matrix_nginx_proxy_ssl_prefer_server_ciphers`
- `matrix_nginx_proxy_ssl_ciphers`
Also a new task is added to validate the SSL configuration variable.
Revert "Correct inabillity for appservice-discord to connect"
This reverts commit 673e19f830.
While certain things do work even with such a local URL, sending
messages leads to an error like this:
> [DiscordBot] verbose: DiscordAPIError: Invalid Form Body
> avatar_url: Not a well formed URL.
Fixes https://github.com/Half-Shot/matrix-appservice-discord/issues/649
The sample configuration file for appservice-discord
c29cfc72f5/config/config.sample.yaml (L8)
explicitly says that we need a public URL.
Now that 0.7.2 is out, the Docker image supports Postgres
and we can do the (SQLite -> Postgres) migration.
I've also found out that we needed to fix up the `tokens.ex_date` column
data type a bit to prevent matrix-registration from raising exceptions
when comparing `datetime.now()` with `ex_date` coming from the database.
Example:
> File "/usr/local/lib/python3.8/site-packages/matrix_registration/tokens.py", line 58, in valid
> expired = self.ex_date < datetime.now()
> TypeError: can't compare offset-naive and offset-aware datetimes
In cases where pgloader is not enough and we need to do some additional
migration work after it, we can now use
`additional_psql_statements_list` and
`additional_psql_statements_db_name`.
This is to be used when migrating `matrix-registration`'s data at the
very least.
This switches us to a container image maintained by the
matrix-registration developer.
0.7.2 also supports a `base_url` configuration option we can use to
make it easier to reverse-proxy at a different base URL.
We still keep some workarounds, because of this issue:
https://github.com/ZerataX/matrix-registration/issues/47
We were running into conflicts, because having initialized
the roles (users) and databases, trying to import leads to
errors (role XXX already exists, etc.).
We were previously ignoring the Synapse database (`homeserver`)
when upgrading/importing, because that one gets created by default
whenever the container starts.
For our additional databases, it's a similar situation now.
It's not created by default as soon as Postgres starts with an empty
database, but rather we create it as part of running the playbook.
So we either need to skip those role/database creation statements
while upgrading/importing, or to avoid creating the additional database
and rely on the import for that. I've gone for the former, because
it's already similar to what we were doing and it's simpler
(it lets `setup_postgres.yml` be the same in all scenarios).
Auto-migration and everything seems to work. It's just that
matrix-registration cannot load the Python modules required
for talking to a Postgres database.
Tracked here: https://github.com/ZerataX/matrix-registration/issues/44
Until this gets fixed, we'll continue default to 'sqlite'.
I was thinking that it makes sense to be more specific,
and using `_postgres_` also separated these variables
from the `_database_` variables that ended up in bridge configuration.
However, @jdreichmann makes a good point
(https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/740#discussion_r542281102)
that we don't need to be so specific and can allow for other engines (like MySQL) to use these variables.
Regression since 2d99ade72f and 9bf8ce878e, respectively.
When SQLite is to be used, these bridges expect an `sqlite://`
connection string, and not a plain file name (path), like Appservice
Discord and mautrix-whatsapp do.
Instead of passing the connection string, we can now pass a name of a
variable, which contains a connection string.
Both are supported for having extra flexibility.
Since we'll likely have generic SQLite database importing
via [pgloader](https://pgloader.io/) for migrating bridge
databases from SQLite to Postgres, we'd rather avoid
calling the "import Synapse SQLite database" command
as just `--tags=import-sqlite-db`.
Similarly, for the media store, we'd like to mention that it's
related to Synapse as well.
We'd like to be more explicit, so as to be less confusing,
especially in light of other homeserver implementations
coming in the future.
People can toggle between them now. The playbook also defaults
to using SQLite if an external Postgres server is used.
Ideally, we'd be able to create databases/users in external Postgres
servers as well, but our initialization logic (and `docker run` command,
etc.) hardcode too many things right now.
While these modules are really nice and helpful, we can't use them
for at least 2 reasons:
- for us, Postgres runs in a container on a private Docker network
(`--network=matrix`) without usually being exposed to the host.
These modules execute on the host so they won't be able to reach it.
- these modules require `psycopg2`, so we need to install it before
using it. This might or might not be its own can of worms.
The tasks in `create_additional_databases.yml` will likely
ensure `matrix-postgres.service` is started, etc.
If no additional databases are defined, we'd rather not execute that
file and all these tasks that it may do in the future.
> Invalid data passed to 'loop', it requires a list, got this instead: matrix_postgres_additional_databases. Hint: If you passed a list/dict of just one element, try adding wantlist=True to your lookup invocation or use q/query instead of lookup.
Well, or working around it, as I've done in this commit (which seems
more sane than `wantlist=True` stuff).
To avoid needing to have `jq` installed on the machine, we could:
- try to run jq in a Docker container using some small image providing
that
- better yet, avoid `jq` altogether
Moving it above the "uninstalling" set of tasks is better.
Extracting it out to another file at the same time, for readability,
especially given that it will probably have to become more complex in
the future (potentially installing `jq`, etc.)
v0.7.0 is broken right now, because it calls
`/_matrix/client/r0/admin/register`, which is now at
`/_synapse/admin/v1/register`.
This has been fixed here: 6b26255fea
.. but it's not part of any release.
Switching to `master` (`docker.io/devture/zeratax-matrix-registration:latest`) until it gets resolved.
Reported upstream here: https://github.com/ZerataX/matrix-registration/issues/43
Starting with Docker 20.10, `--hostname` seems to have the side-effect
of making Docker's internal DNS server resolve said hostname to the IP
address of the container.
Because we were giving the mailer service a hostname of `matrix.DOMAIN`,
all requests destined for `matrix.DOMAIN` originating from other
services on the container network were resolving to `matrix-mailer`.
This is obviously wrong.
Initially reported here: https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/748
We normally try to not use the public hostname (and IP address) on the
container network and try to make services talk to one another locally,
but it sometimes could happen.
With this, we use a `matrix-mailer` hostname for the matrix-mailer
container. My testing shows that it doesn't cause any trouble with
email deliverability.
If a service is enabled, a database for it is created in postgres with a uniqque password. The service can then use this database for data storage instead of relying on sqlite.
The Docker 19.04 -> 20.10 upgrade contains the following change
in `/usr/lib/systemd/system/docker.service`:
```
-BindsTo=containerd.service
-After=network-online.target firewalld.service containerd.service
+After=network-online.target firewalld.service containerd.service multi-user.target
-Requires=docker.socket
+Requires=docker.socket containerd.service
Wants=network-online.target
```
The `multi-user.target` requirement in `After` seems to be in conflict
with our `WantedBy=multi-user.target` and `After=docker.service` /
`Requires=docker.service` definitions, causing the following error on
startup for all of our systemd services:
> Job matrix-synapse.service/start deleted to break ordering cycle starting with multi-user.target/start
A workaround which appears to work is to add `DefaultDependencies=no`
to all of our services.
After recently updating my matrix-docker-ansible-deploy installation, matrix-appservice-discord would refuse to start, logging ECONNREFUSED to https://matrix.[mydomain]:443, which was resolving to 172.18.0.2 due to the `--hostname` in mailer grabbing that hostname.
Curious why the IRC bridge didn't have this issue, I looked into it, and it was connecting to `http://matrix-synapse:8008`. Correcting this one to that URL resolved the issue.
ma1sd requires the openid endpoints for certain functionality.
Example: 90b2b5301c/src/main/java/io/kamax/mxisd/auth/AccountManager.java (L67-L99)
If federation is disabled, we still need to expose these openid APIs on the
federation port.
Previously, we were doing similar magic for Dimension.
As per its documentation, when running unfederated, one is to enable
the openid listener as well. As per their recommendation, people
are advised to do enable it on the Client-Server API port
and use the `federationUrl` variable to override where the federation
port is (making federation requests go to the Client-Server API).
Because ma1sd always uses the federation port (unless you do some
DNS overwriting magic using its configuration -- which we'd rather not
do), it's better if we just default to putting the `openid` listener
where it belongs - on the federation port.
With this commit, we retain the "automatically enable openid APIs" thing
we've been doing for Dimension, but move it to the federation port instead.
We also now do the same thing when ma1sd is enabled.
We've had a report of the `connection` value getting cut off,
supposedly because it contains something that breaks off the string.
Using `|to_json` takes care of it.
This may be a bit premature, because the bridge didn't work for me
the last time I tried it (RC3).
Some bugs have been fixed to make our config compatible with v1.0.0
though, so it may work for some people (especially those starting
fresh).
I'm not for shipping potentially broken things, but given that we were
using `docker.io/halfshot/matrix-appservice-discord:latest` and that
points to v1.0.0 already (with no other tag we can use), our setup was
already broken in any case.
Now, at least it has some chance of running.
Many people probably didn't even know this - that ansible can be
quite a bit picky about what it will be willing to work with remotely.
Thanks @maxklenk !
Some people requested that `--tags=start` not set up service autostart.
One can now do `--tags=start --extra-vars="matrix_services_autostart_enabled=false"`
to just start services ones and not set up autostarting.
It's not like it worked anyway, because we don't have the necessary
services installed for transcription (Jigasi), nor recording (Jibri).
Disabling these, should hopefully disable their related elements
in the Jitsi Web UI.
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/726
This supersedes/fixes-up this Pull Request:
https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/719
The Jitsi Web and JVB containers now (in build 5142) always
start by bulding their own default configuration
(`config.js` and `sip-communicator.properties`, respectively).
The fact that we were generating these files ourselves was no longer of use,
because our configuration was thrown away in favor of the one created
by the containers on startup.
With this commit, we're completely redoing things. We no longer
generate these configuration files. We try to pass the proper
environment variables, so that Jitsi services can generate the
configuration files themselves.
Besides that, we try to use the "custom configuration" mechanism
provided by Jitsi Web and Jitsi JVB (`custom-config.js` and
`custom-sip-communicator.properties`, respectively), so that
we and our users can inject additional configuration.
Some configuration options we had are gone now. Others are no longer
controllable via variables and need to be injected using
the `_config_extension` variables that we provide.
The validation logic that is part of the role should take care
to inform people about how to upgrade (if they're using some custom
configuration, which needs special care now). Most users should not
have to do anything special though.
Since the switch from `-v` to `--mount` (in 1fca917ad1),
we've regressed when `matrix_ssl_retrieval_method == 'none'`.
In such a case, we don't create `/matrix/ssl` directories at all
and shouldn't be trying to mount them into the `matrix-nginx-proxy`
container.
Previously, with `-v`, Docker would auto-create them, effectively hiding
our mistake. Now that `--mount` doesn't do such auto-creation magic,
the `matrix-nginx-proxy` container was failing to start.
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/734
`-v` magically creates the source destination as a directory,
if it doesn't exist already. We'd like to avoid this magic
and the potential breakage that it might cause.
We'd rather fail while Docker tries to find things to `--mount`
than have it automatically create directories and fail anyway,
while having contaminated the filesystem.
There's a lot more `-v` instances remaining to be fixed later on.
This is just some start.
Things like `matrix_synapse_container_additional_volumes` and
`matrix_nginx_proxy_container_additional_volumes` were not changed to
use `--mount`, as options for each one are passed differently
(`ro` is `ro`, but `rw` doesn't exist and `slave` is `bind-propagation=slave`).
To avoid breaking people's custom volume mounts, we keep it as it is for now.
A deficiency with `--mount` is that it lacks the `z` option (SELinux
ownership changes), and some of our `-v` instances use that. I'm not
sure how supported SELinux is for us right now, but it might be,
and breaking that would not be a good idea.
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/716
This patch makes us use more fully-qualified container image names
(either prefixed with docker.io/ or with localhost/).
The latter happens when self-building is enabled.
We've recently had issues where if an image was removed manually
and the service was restarted (making `docker run` fetch it from Docker Hub, etc.),
we'd end up with a pulled image, even though we're aiming for a self-built one.
Re-running the playbook would then not do a rebuild, because:
- the image with that name already exists (even though it's something
else)
- we sometimes had conditional logic where we'd build only if the git
repo changed
By explicitly changing the name of the images (prefixing with localhost/),
we avoid such confusion and the possibility that we'd automatically pul something
which is not what we expect.
Also, I've removed that condition where building would happen on git
changes only. We now always build (unless an image with that name
already exists). We just force-build when the git repo changes.
We'd like the roles to be self-contained (as much as possible).
Thus, the `matrix-nginx-proxy` shouldn't reference any variables from
other roles. Instead, we rely on injection via
`group_vars/matrix_servers`.
Related to #681 (Github Pull Request)
Having it unset in the role itself (while referencign it) is a little strange.
Now people can look at the `roles/matrix-dynamic-dns/defaults/main.yml`
file and figure out everything that's necessary to run the role.
Related to #681 (Github Pull Request)
This broke in 63a49bb2dc.
Proxying the OpenID Connect endpoints is now possible,
but needs to be enabled explicitly now.
Supersedes #702 (Github Pull Request).
This patch builds up on the idea from that Pull Request,
but does things in a cleaner way.
We do this to match Synapse's new default "max_upload_size" (50MB).
This `matrix_nginx_proxy_proxy_matrix_client_api_client_max_body_size_mb`
default value only affects standalone usage of the `matrix-nginx-proxy`
role. When the role is used in the context of the playbook,
the value is dynamically assigned from `group_vars/matrix_servers`.
Somewhat related to #692 (Github Issue).
The regex introduced in 63a49bb2dc seems to take precedence
over the bare location blocks, causing a regression.
> It is important to understand that, by default, Nginx will serve regular expression matches in preference to prefix matches.
> However, it evaluates prefix locations first, allowing for the administer to override this tendency by specifying locations using the = and ^~ modifiers.
Source: https://www.digitalocean.com/community/tutorials/understanding-nginx-server-and-location-block-selection-algorithms
also, worker.yaml.j2:
- hone worker_name
- remove worker_pid_file entry (would only be used if worker_daemonize
set to true; also, synapse only knows about the container namespace
and thus can not provide the required host-view PID)
- cherry-pick "Ensure worker config exists in systemd service (#7528)"
from synapse d74cdc1a42e8b487d74c214b1d0ca575429d546a:
"check that the worker config file exists instead of silently failing."
If the SQLite database was from an older version of Synapse, it appears
that Synapse would try to run migrations on it first, before importing.
This was failing, because the file wasn't writable.
Hopefully, this fixes the problem.
Interestingly, no one has reported this failure before #662 (Github
Issue).
It doesn't make sense to keep saying that we support such old Ansible
versions, when we're not even testing on anything close to those.
Time is also passing and such versions are getting more and more
ancient. It's time we bumped our requirements to something that is more
likely to work.
showLabsSettings is the new enableLabs I guess. enableLabs doesn't seem to do anything anymore. It had been deprecated for a while.
This PR also removes @riot-bot:matrix.org as the default welcome_user_id since it doesn't exist anymore.
We recently had a report of the Postgres backup container's log file
growing the size of /var/lib/docker until it ran out of disk space.
Trying to prevent similar problems in the future.
Certain more-minimal Debian installations may not have
lsb-release installed, which makes the playbook fail.
We need lsb-release on Debian, so that ansible_lsb
could tell us if this is Debian or Raspbian.
In #628 I proposed a CORS change that turns out not to be the root of the issue. Caffeine-addled diagnosis leads to sloppy thinking, and this change should be reverted. In fact, if left it will cause problems for new installations.
Even with the v2 updates listed in #503 and partially addressed in #614, this is still needed to enable identity services to function with Element Desktop/Web. Testing on multiple clients with a clean config has confirmed this, at least for my installation.
Fix regression since 2a50b8b6bb (#597).
Dimension is intended to be embedded in various clients,
be it the Element service that we host (at element.DOMAIN),
some other Element (element-desktop running locally), etc.
The when statement is supposed to be on the block, not on the individual task.
It affects all tasks within the block (they're all to be executed when ma1sd is enabled and self-building is requested0.
The tag format used in the `ma1sd` repo have change. Versions no longer
start with 'v', and when building for non-amd64, we also need to strip
off the '-$arch' bit from the Docker image name.
Further, when building the .jar file, `ma1sd` currently names the .jar
based on the project's directory, which we call 'docker-src'. This means
other parts of the `ma1sd` build can't find the .jar file. Remedy this
by ensuring that the dir is called `docker-src/ma1sd`.
