Commit graph

64 commits

Author SHA1 Message Date
Marko Weltzer 819574b8ba
Merge branch 'spantaleev:master' into master 2022-02-05 21:37:53 +01:00
Marko Weltzer 7e5b88c3b7 fix: all praise the allmighty yamllinter 2022-02-05 21:32:54 +01:00
Slavi Pantaleev 86c36523df Replace ExecStopPost with ExecStop
Reverts b1b4ba501f, 90c9801c56, a3c84f78ca, ..

I haven't really traced it (yet), but on some servers, I'm observing
`ansible-playbook ... --tags=start` completing very slowly, waiting
to stop services. I can't reproduce this on all Matrix servers I manage.
I suspect that either the systemd version is to blame or that some
specific service is not responding well to some `docker kill/rm` command.

`ExecStop` seems to work great in all cases and it's what we've been
using for a very long time, so I'm reverting to that.
2022-02-05 12:13:36 +02:00
Slavi Pantaleev b1b4ba501f Replace ExecStop with ExecStopPost
ExecStopPost should allow us to clean up (docker kill + docker rm)
even if the ExecStart (docker run ..) command failed, and not just after
a graceful service stop was initiated.

Source: https://www.freedesktop.org/software/systemd/man/systemd.service.html#ExecStopPost=
2022-01-04 17:27:25 +02:00
Aaron Raimist fac497faa5
Fix comments in other roles 2021-12-08 10:13:12 +00:00
Slavi Pantaleev 75cb4ce3b0 Add warning about matrix_ma1sd_default_port being renamed
Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1403
2021-11-17 10:38:52 +02:00
Slavi Pantaleev b4fb819481
Merge pull request #1403 from borisrunakov/rename-matrix-ma1sd-default-port
remove default from variable name
2021-11-17 10:35:54 +02:00
boris runakov 394ecb0acc remove default from variable name 2021-11-16 21:14:28 +02:00
boris runakov d3a9ec98de refactoring 2021-11-16 21:03:21 +02:00
boris runakov 1ec67f49b0 replaced 8008 where possible 2021-11-15 22:43:05 +02:00
Slavi Pantaleev 735c966ab6 Disable systemd services when stopping to uninstall them
Until now, we were leaving services "enabled"
(symlinks in /etc/systemd/system/multi-user.target.wants/).

We clean these up now. Broken symlinks may still exist in older
installations that enabled/disabled services. We're not taking care
to fix these up. It's just a cosmetic defect anyway.
2021-11-10 17:39:21 +02:00
b dcda17595a change port 8090 to matrix_ma1sd_default_port 2021-10-31 21:06:22 +02:00
Slavi Pantaleev 676101e999 Minor fixups for ma1sd 2.5.0
Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1171
2021-07-28 11:08:50 +03:00
Markus 83b9908c9d
Update to ma1sd v2.5.0 2021-07-10 14:09:08 +02:00
Slavi Pantaleev fa76c1ee5b Do not run self-build Ansible version-check, if component not enabled
Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1108
2021-06-08 08:59:02 +03:00
Slavi Pantaleev 47b4608b96 Fail in a friendlier way when trying to self-build on Ansible <= 2.8
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/1070

Related discussion here: 1ab507349c (commitcomment-51108407)
2021-05-21 11:15:05 +03:00
Ahmad Haghighi e335f3fc77 rename matrix_global_registry to matrix_container_global_registry_prefix related to #990
Signed-off-by: Ahmad Haghighi <haghighi@fedoraproject.org>
2021-04-12 17:23:55 +04:30
Ahmad Haghighi f52a8b6484 use custom docker registry 2021-04-12 17:23:55 +04:30
Slavi Pantaleev 512f42aa76 Do not report docker kill/rm attempts as errors
These are just defensive cleanup tasks that we run.
In the good case, there's nothing to kill or remove, so they trigger an
error like this:

> Error response from daemon: Cannot kill container: something: No such container: something

and:

> Error: No such container: something

People often ask us if this is a problem, so instead of always having to
answer with "no, this is to be expected", we'd rather eliminate it now
and make logs cleaner.

In the event that:
- a container is really stuck and needs cleanup using kill/rm
- and cleanup fails, and we fail to report it because of error
suppression (`2>/dev/null`)

.. we'd still get an error when launching ("container name already in use .."),
so it shouldn't be too hard to investigate.
2021-01-27 10:22:46 +02:00
Slavi Pantaleev 1692a28fe4 Work around annoying Docker warning about undefined $HOME
> WARNING: Error loading config file: .dockercfg: $HOME is not defined

.. which appeared in Docker 20.10.
2021-01-15 00:23:01 +02:00
Slavi Pantaleev 26f0bbfdef Fix self-building for matrix-ma1sd on non-version tag/branch
Building `master` or something like this was failing.
2021-01-14 23:57:38 +02:00
Slavi Pantaleev 9e936e45ad Use BuildKit for ma1sd Docker building
Newer versions (`master`) use things like `--platform=...`,
which are not supported unless we enable the new BuildKit building
backend.
2021-01-14 23:48:30 +02:00
Slavi Pantaleev 05ca9357a8 Add .service suffix to systemd units list
We'll be adding `.timer` units later on, so it's good to be
more explicit.
2021-01-14 23:02:10 +02:00
Slavi Pantaleev 653d1d7924 Revert "Don't self-build ma1sd every time unless git sources changed"
This reverts commit 2a25b63bb6.

Looking at other roles, we trigger building regardless of this.
It's better to always trigger it, because it's less fragile.
If the build fails and we only trigger it on "git changes"
then we won't trigger it for a while. That's not good.

Triggering it each and every time may seem like a waste,
but it supposedly runs quickly due to Docker caching.
2021-01-14 22:20:51 +02:00
Slavi Pantaleev 2a25b63bb6 Don't self-build ma1sd every time unless git sources changed 2021-01-13 20:14:47 +02:00
Slavi Pantaleev 4805637181 Add support for custom ma1sd view sesion templates 2021-01-03 07:36:09 +02:00
Slavi Pantaleev f84c69c164 Relocate custom ma1sd threepid email templates to config/
We used to store them in data/, but that seems inappropriate,
since it's just static configuration that the playbook can recreate.
2021-01-03 07:35:13 +02:00
Slavi Pantaleev b5812b539b Rename ma1sd custom email template variable
Keeps up with a1f64f5159 (diff-0ccf69eb4d59a7645eb4d0a0b077e693948edb33ad06df043bba3fb30122879b)
2021-01-03 00:58:31 +02:00
Stuart Mumford 019a4d7dcd Use role relative paths for things 2020-12-23 11:34:48 +00:00
Slavi Pantaleev 15f4cc924d Rename variables (_database_db_name -> _database_name) 2020-12-22 17:10:02 +02:00
Slavi Pantaleev af3ea67bba Add (SQLite + Postgres) support and automatic migration to matrix-ma1sd 2020-12-14 17:16:25 +02:00
Slavi Pantaleev 0ca48f3532 Separate matrix-ma1sd install/uninstall tasks 2020-12-14 16:57:51 +02:00
Slavi Pantaleev d08b27784f Fix systemd services autostart problem with Docker 20.10
The Docker 19.04 -> 20.10 upgrade contains the following change
in `/usr/lib/systemd/system/docker.service`:

```
-BindsTo=containerd.service
-After=network-online.target firewalld.service containerd.service
+After=network-online.target firewalld.service containerd.service multi-user.target
-Requires=docker.socket
+Requires=docker.socket containerd.service
Wants=network-online.target
```

The `multi-user.target` requirement in `After` seems to be in conflict
with our `WantedBy=multi-user.target` and `After=docker.service` /
`Requires=docker.service` definitions, causing the following error on
startup for all of our systemd services:

> Job matrix-synapse.service/start deleted to break ordering cycle starting with multi-user.target/start

A workaround which appears to work is to add `DefaultDependencies=no`
to all of our services.
2020-12-10 11:43:20 +02:00
Slavi Pantaleev 7372480e95 Properly serialize some ma1sd configuration values
We've had a report of the `connection` value getting cut off,
supposedly because it contains something that breaks off the string.

Using `|to_json` takes care of it.
2020-12-06 23:59:58 +02:00
Slavi Pantaleev be5263f397 Move self-building git repository URLs to variables (stop hardcoding) 2020-11-28 21:34:14 +02:00
Slavi Pantaleev 1fca917ad1 Replace some -v instances with --mount
`-v` magically creates the source destination as a directory,
if it doesn't exist already. We'd like to avoid this magic
and the potential breakage that it might cause.

We'd rather fail while Docker tries to find things to `--mount`
than have it automatically create directories and fail anyway,
while having contaminated the filesystem.

There's a lot more `-v` instances remaining to be fixed later on.
This is just some start.

Things like `matrix_synapse_container_additional_volumes` and
`matrix_nginx_proxy_container_additional_volumes` were not changed to
use `--mount`, as options for each one are passed differently
(`ro` is `ro`, but `rw` doesn't exist and `slave` is `bind-propagation=slave`).
To avoid breaking people's custom volume mounts, we keep it as it is for now.

A deficiency with `--mount` is that it lacks the `z` option (SELinux
ownership changes), and some of our `-v` instances use that. I'm not
sure how supported SELinux is for us right now, but it might be,
and breaking that would not be a good idea.
2020-11-24 10:26:05 +02:00
Slavi Pantaleev 5eed874199 Improve self-building experience (avoid conflict with pullable images)
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/716

This patch makes us use more fully-qualified container image names
(either prefixed with docker.io/ or with localhost/).

The latter happens when self-building is enabled.

We've recently had issues where if an image was removed manually
and the service was restarted (making `docker run` fetch it from Docker Hub, etc.),
we'd end up with a pulled image, even though we're aiming for a self-built one.
Re-running the playbook would then not do a rebuild, because:
- the image with that name already exists (even though it's something
else)
- we sometimes had conditional logic where we'd build only if the git
repo changed

By explicitly changing the name of the images (prefixing with localhost/),
we avoid such confusion and the possibility that we'd automatically pul something
which is not what we expect.

Also, I've removed that condition where building would happen on git
changes only. We now always build (unless an image with that name
already exists). We just force-build when the git repo changes.
2020-11-14 23:00:49 +02:00
vractal 627c225101 Enable ma1sd hashing by default 2020-07-29 12:38:07 -04:00
Slavi Pantaleev 28855d1bb4
Document matrix_ma1sd_docker_src_files_path naming 2020-07-17 11:47:15 +03:00
Slavi Pantaleev ab188018f3
Move when statement to block
The when statement is supposed to be on the block, not on the individual task.

It affects all tasks within the block (they're all to be executed when ma1sd is enabled and self-building is requested0.
2020-07-17 11:44:26 +03:00
Matt Cengia fede58fe96 Correctly tag self-built ma1sd Docker image 2020-07-17 17:12:16 +10:00
Matt Cengia b0e984136f Fix issues building ma1sd Docker image
The tag format used in the `ma1sd` repo have change. Versions no longer
start with 'v', and when building for non-amd64, we also need to strip
off the '-$arch' bit from the Docker image name.

Further, when building the .jar file, `ma1sd` currently names the .jar
based on the project's directory, which we call 'docker-src'. This means
other parts of the `ma1sd` build can't find the .jar file. Remedy this
by ensuring that the dir is called `docker-src/ma1sd`.
2020-07-17 13:57:47 +10:00
shadow 6293f1bdb0 Run all API self checks in check_mode 2020-07-04 15:24:33 +02:00
Slavi Pantaleev 635f385971 Use pre-built arm64 image for ma1sd
ma1sd 2.4.0 announced experimental support for arm64.
We're making use of those arm64 images instead of self-building.
2020-06-29 14:53:23 +03:00
teutat3s 4cf59098ad
Update ma1sd to v2.4.0 2020-06-28 21:47:19 +02:00
Slavi Pantaleev 5da31ba579 Move configuration templates outside of defaults/main.yml files 2020-06-03 09:33:28 +03:00
Chris van Dijk 6334f6c1ea Remove hardcoded command paths in systemd unit files
Depending on the distro, common commands like sleep and chown may either
be located in /bin or /usr/bin.

Systemd added path lookup to ExecStart in v239, allowing only the
command name to be put in unit files and not the full path as
historically required. At least Ubuntu 18.04 LTS is however still on
v237 so we should maintain portability for a while longer.
2020-05-27 23:14:54 +02:00
Slavi Pantaleev a3259bbd77
Add |to_json to some variables 2020-05-19 21:15:23 +03:00
louis a03e95b7eb enable by default v2 api prefix for ma1sd 2020-05-19 17:06:11 +02:00
Chris van Dijk 7585bcc4ac Allow the matrix user username and groupname to be configured separately
No migration steps should be required.
2020-05-01 19:59:32 +02:00