# This is the Dendrite configuration file.
#
# The configuration is split up into sections - each Dendrite component has a
# configuration section, in addition to the "global" section which applies to
# all components.
#
# At a minimum, to get started, you will need to update the settings in the
# "global" section for your deployment, and you will need to check that the
# database "connection_string" line in each component section is correct.
#
# Each component with a "database" section can accept the following formats
# for "connection_string":
#   SQLite:     file:filename.db
#               file:///path/to/filename.db
#   PostgreSQL: postgresql://user:pass@hostname/database?params=...
#
# SQLite is embedded into Dendrite and therefore no further prerequisites are
# needed for the database when using SQLite mode. However, performance with
# PostgreSQL is significantly better and recommended for multi-user deployments.
# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
# small number of users and likely will perform worse still with a higher volume
# of users.
#
# The "max_open_conns" and "max_idle_conns" settings configure the maximum
# number of open/idle database connections. The value 0 will use the database
# engine default, and a negative value will use unlimited connections. The
# "conn_max_lifetime" option controls the maximum length of time a database
# connection can be idle in seconds - a negative value is unlimited.

# The version of the configuration file.
version: 2

# Global Matrix configuration. This configuration applies to all components.
global:
  # The domain name of this homeserver.
  server_name: {{ matrix_domain|to_json }}

  # The path to the signing private key file, used to sign requests and events.
  # Note that this is NOT the same private key as used for TLS! To generate a
  # signing key, use "./bin/generate-keys --private-key matrix_key.pem".
  private_key: "/data/{{ matrix_server_fqn_matrix }}.signing.pem"

  # The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)
  # to old signing private keys that were formerly in use on this domain. These
  # keys will not be used for federation request or event signing, but will be
  # provided to any other homeserver that asks when trying to verify old events.
  # old_private_keys:
  # - private_key: old_matrix_key.pem
  #   expired_at: 1601024554498

  # How long a remote server can cache our server signing key before requesting it
  # again. Increasing this number will reduce the number of requests made by other
  # servers for our key but increases the period that a compromised key will be
  # considered valid by other homeservers.
  key_validity_period: 168h0m0s

  # The server name to delegate server-server communications to, with optional port
  # e.g. localhost:443
  well_known_server_name: ""

  # The server name to delegate client-server communications to, with optional port
  # e.g. localhost:443
  well_known_client_name: ""

  # Lists of domains that the server will trust as identity servers to verify third
  # party identifiers such as phone numbers and email addresses.
  trusted_third_party_id_servers: {{ matrix_dendrite_trusted_id_servers|to_json }}

  # Disables federation. Dendrite will not be able to make any outbound HTTP requests
  # to other servers and the federation API will not be exposed.
  disable_federation: {{ (not matrix_dendrite_federation_enabled)|to_json }}

  # Configures the handling of presence events.
  presence:
    # Whether inbound presence events are allowed, e.g. receiving presence events from other servers
    enable_inbound: false
    # Whether outbound presence events are allowed, e.g. sending presence events to other servers
    enable_outbound: false

  # Configuration for in-memory caches. Caches can often improve performance by
  # keeping frequently accessed items (like events, identifiers etc.) in memory
  # rather than having to read them from the database.
  cache:
    # The estimated maximum size for the global cache in bytes, or in terabytes,
    # gigabytes, megabytes or kilobytes when the appropriate 'tb', 'gb', 'mb' or
    # 'kb' suffix is specified. Note that this is not a hard limit, nor is it a
    # memory limit for the entire process. A cache that is too small may ultimately
    # provide little or no benefit.
    max_size_estimated: 1gb

    # The maximum amount of time that a cache entry can live for in memory before
    # it will be evicted and/or refreshed from the database. Lower values result in
    # easier admission of new cache entries but may also increase database load in
    # comparison to higher values, so adjust conservatively. Higher values may make
    # it harder for new items to make it into the cache, e.g. if new rooms suddenly
    # become popular.
    max_age: 1h

  # Server notices allows server admins to send messages to all users.
  server_notices:
    enabled: false
    # The server localpart to be used when sending notices, ensure this is not yet taken
    local_part: "_server"
    # The displayname to be used when sending notices
    display_name: "Server alerts"
    # The mxid of the avatar to use
    avatar_url: ""
    # The roomname to be used when creating messages
    room_name: "Server Alerts"

  # Configuration for NATS JetStream
  jetstream:
    # A list of NATS Server addresses to connect to. If none are specified, an
    # internal NATS server will be started automatically when running Dendrite
    # in monolith mode. It is required to specify the address of at least one
    # NATS Server node if running in polylith mode.
    addresses:
    #  - jetstream:4222

    # Keep all NATS streams in memory, rather than persisting it to the storage
    # path below. This option is present primarily for integration testing and
    # should not be used on a real world Dendrite deployment.
    in_memory: false

    # Persistent directory to store JetStream streams in. This directory
    # should be preserved across Dendrite restarts.
    storage_path: "/matrix-nats-store"

    # The prefix to use for stream names for this homeserver - really only
    # useful if running more than one Dendrite on the same NATS deployment.
    topic_prefix: Dendrite

  # Configuration for Prometheus metric collection.
  metrics:
    # Whether or not Prometheus metrics are enabled.
    enabled: {{ matrix_dendrite_metrics_enabled|to_json }}

    # HTTP basic authentication to protect access to monitoring.
    basic_auth:
      username: {{ matrix_dendrite_metrics_username|to_json }}
      password: {{ matrix_dendrite_metrics_password|to_json }}

  # DNS cache options. The DNS cache may reduce the load on DNS servers
  # if there is no local caching resolver available for use.
  dns_cache:
    # Whether or not the DNS cache is enabled.
    enabled: false

    # Maximum number of entries to hold in the DNS cache, and
    # for how long those items should be considered valid in seconds.
    cache_size: 256
    cache_lifetime: "5m" # 5minutes; see https://pkg.go.dev/time@master#ParseDuration for more

# Configuration for the Appservice API.
app_service_api:
  internal_api:
    listen: http://0.0.0.0:7777
    connect: http://appservice_api:7777

  # Disable the validation of TLS certificates of appservices. This is
  # not recommended in production since it may allow appservice traffic
  # to be sent to an unverified endpoint.
  disable_tls_validation: {{ matrix_dendrite_disable_tls_validation|to_json }}

  # Appservice configuration files to load into this homeserver.
  config_files: {{ matrix_dendrite_app_service_config_files_final|to_json }}

# Configuration for the Client API.
client_api:
  internal_api:
    listen: http://0.0.0.0:7771
    connect: http://client_api:7771
  external_api:
    listen: http://0.0.0.0:8071

  # Prevents new users from being able to register on this homeserver, except when
  # using the registration shared secret below.
  registration_disabled: {{ matrix_dendrite_registration_disabled|to_json }}

  # Prevents new guest accounts from being created. Guest registration is also
  # disabled implicitly by setting 'registration_disabled' above.
  guests_disabled: true

  # If set, allows registration by anyone who knows the shared secret, regardless of
  # whether registration is otherwise disabled.
  registration_shared_secret: {{ matrix_dendrite_registration_shared_secret | string|to_json }}

  # Whether to require reCAPTCHA for registration.
  enable_registration_captcha: {{ matrix_dendrite_enable_registration_captcha|to_json }}

  # Settings for ReCAPTCHA.
  recaptcha_public_key: {{ matrix_dendrite_recaptcha_public_key|to_json }}
  recaptcha_private_key: {{ matrix_dendrite_recaptcha_private_key|to_json }}
  recaptcha_bypass_secret: ""
  recaptcha_siteverify_api: {{ matrix_dendrite_recaptcha_siteverify_api|to_json }}

  # TURN server information that this homeserver should send to clients.
  turn:
    turn_user_lifetime: ""
    turn_uris: {{ matrix_dendrite_turn_uris|to_json }}
    turn_shared_secret: {{ matrix_dendrite_turn_shared_secret|to_json }}
    turn_username: ""
    turn_password: ""

  # Settings for rate-limited endpoints. Rate limiting will kick in after the
  # threshold number of "slots" have been taken by requests from a specific
  # host. Each "slot" will be released after the cooloff time in milliseconds.
  rate_limiting:
    enabled: {{ matrix_dendrite_rate_limiting_enabled|to_json }}
    threshold: {{ matrix_dendrite_rate_limiting_threshold|to_json }}
    cooloff_ms: {{ matrix_dendrite_rate_limiting_cooloff_ms|to_json }}
    exempt_user_ids:
    #  - "@user:domain.com"

# Configuration for the Federation API.
federation_api:
  internal_api:
    listen: http://0.0.0.0:7772
    connect: http://federation_api:7772
  external_api:
    listen: http://0.0.0.0:8072
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_federationapi_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

  # How many times we will try to resend a failed transaction to a specific server. The
  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
  send_max_retries: 16

  # Disable the validation of TLS certificates of remote federated homeservers. Do not
  # enable this option in production as it presents a security risk!
  disable_tls_validation: {{ matrix_dendrite_disable_tls_validation|to_json }}

  # Not in dendrite-config.yaml, but is in build/docker/config/dendrite.yaml
  # Use the following proxy server for outbound federation traffic.
  #proxy_outbound:
  #  enabled: false
  #  protocol: http
  #  host: localhost
  #  port: 8080

  # Perspective keyservers to use as a backup when direct key fetches fail. This may
  # be required to satisfy key requests for servers that are no longer online when
  # joining some rooms.
  key_perspectives:
    - server_name: matrix.org
      keys:
        - key_id: ed25519:auto
          public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
        - key_id: ed25519:a_RXGa
          public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ

  # This option will control whether Dendrite will prefer to look up keys directly
  # or whether it should try perspective servers first, using direct fetches as a
  # last resort.
  prefer_direct_fetch: false

# Configuration for the Key Server (for end-to-end encryption).
key_server:
  internal_api:
    listen: http://0.0.0.0:7779
    connect: http://key_server:7779
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_keyserver_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the Media API.
media_api:
  internal_api:
    listen: http://0.0.0.0:7774
    connect: http://media_api:7774
  external_api:
    listen: http://0.0.0.0:8074
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_mediaapi_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

  # Storage path for uploaded media. May be relative or absolute.
  base_path: "/matrix-media-store-parent/{{ matrix_dendrite_media_store_directory_name }}"

  # The maximum allowed file size (in bytes) for media uploads to this homeserver
  # (0 = unlimited). If using a reverse proxy, ensure it allows requests at
  # least this large (e.g. client_max_body_size in nginx.)
  max_file_size_bytes: {{ matrix_dendrite_max_file_size_bytes|to_json }}

  # Whether to dynamically generate thumbnails if needed.
  dynamic_thumbnails: false

  # The maximum number of simultaneous thumbnail generators to run.
  max_thumbnail_generators: 10

  # A list of thumbnail sizes to be generated for media content.
  thumbnail_sizes:
    - width: 32
      height: 32
      method: crop
    - width: 96
      height: 96
      method: crop
    - width: 640
      height: 480
      method: scale

# Configuration for experimental MSC's
mscs:
  # A list of enabled MSC's
  # Currently valid values are:
  # - msc2836    (Threading, see https://github.com/matrix-org/matrix-doc/pull/2836)
  # - msc2946    (Spaces Summary, see https://github.com/matrix-org/matrix-doc/pull/2946)
  mscs: []
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_mscs_database }}?sslmode=disable
    max_open_conns: 5
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the Room Server.
room_server:
  internal_api:
    listen: http://0.0.0.0:7770
    connect: http://room_server:7770
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_room_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the Sync API.
sync_api:
  internal_api:
    listen: http://0.0.0.0:7773
    connect: http://sync_api:7773
  external_api:
    listen: http://0.0.0.0:8073
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_syncapi_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

  # This option controls which HTTP header to inspect to find the real remote IP
  # address of the client. This is likely required if Dendrite is running behind
  # a reverse proxy server.
  # real_ip_header: X-Real-IP
  real_ip_header: {{ matrix_dendrite_sync_api_real_ip_header|to_json }}
  # Configuration for the full-text search engine.
  search:
    # Whether or not search is enabled.
    enabled: false
    # The path where the search index will be created in.
    index_path: "/matrix-media-store-parent/searchindex"
    # The language most likely to be used on the server - used when indexing, to
    # ensure the returned results match expectations. A full list of possible languages
    # can be found at https://github.com/blevesearch/bleve/tree/master/analysis/lang
    language: "en"

# Configuration for the User API.
user_api:
  # The cost when hashing passwords on registration/login. Default: 10. Min: 4, Max: 31
  # See https://pkg.go.dev/golang.org/x/crypto/bcrypt for more information.
  # Setting this lower makes registration/login consume less CPU resources at the cost of security
  # should the database be compromised. Setting this higher makes registration/login consume more
  # CPU resources but makes it harder to brute force password hashes.
  # This value can be low if performing tests or on embedded Dendrite instances (e.g WASM builds)
  # bcrypt_cost: 10
  internal_api:
    listen: http://0.0.0.0:7781
    connect: http://user_api:7781
  account_database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_userapi_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1
  # The length of time that a token issued for a relying party from
  # /_matrix/client/r0/user/{userId}/openid/request_token endpoint
  # is considered to be valid in milliseconds.
  # The default lifetime is 3600000ms (60 minutes).
  # openid_token_lifetime_ms: 3600000
  auto_join_rooms: {{ matrix_dendrite_userapi_auto_join_rooms | to_json }}

# Not in dendrite-config.yaml, but is in build/docker/config/dendrite.yaml
# Configuration for the Push Server API.
push_server:
  internal_api:
    listen: http://localhost:7782
    connect: http://localhost:7782
  database:
    connection_string: {{ matrix_dendrite_database_str }}/{{ matrix_dendrite_pushserver_database }}?sslmode=disable
    max_open_conns: 10
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for Opentracing.
# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on
# how this works and how to set it up.
tracing:
  enabled: false
  jaeger:
    serviceName: ""
    disabled: false
    rpc_metrics: false
    tags: []
    sampler: null
    reporter: null
    headers: null
    baggage_restrictions: null
    throttler: null

# Logging configuration, in addition to the standard logging that is sent to
# stdout by Dendrite.
logging: []

# statistics reporting configuration. These statistics contain the server
# name, number of active users and some information on your deployment config.
report_stats: {{ matrix_dendrite_report_stats|to_json }}