Merge pull request 'Update flake inputs' (#258) from main-update-flake-inputs into main

Reviewed-on: #258
Reviewed-by: b12f <hello@benjaminbaedorf.eu>

.drone.yml

@@ -1,7 +1,7 @@
 ---
 kind: pipeline
 type: exec
-name: Check and deploy
+name: Check
 node:
   hosttype: baremetal
 
@@ -15,27 +15,9 @@ steps:
     commands:
       - 'echo DEBUG: Using NIX_FLAGS: $NIX_FLAGS'
       - nix $$NIX_FLAGS develop --command nix flake show
-      - nix $$NIX_FLAGS build ".#nixosConfigurations.host_001_momo_koeln.config.system.build.toplevel"
-
-  - name: "Deploy"
-    when:
-      event:
-        - push
-      branch:
-        - momo/main
-    environment:
-      NIX_FLAGS: "--print-build-logs --verbose --accept-flake-config"
-      PRIVATE_SSH_KEY:
-        from_secret: ci_private_ssh_key
-      SSH_HOST_KEY: "80.244.242.4 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE7XTCHfX6ta8EtkdOcZLnpdhMmXDfTebVMs4NC8JEPj"
-    commands:
-      - mkdir $$HOME/.ssh && chmod 700 $$HOME/.ssh
-      - echo "$$PRIVATE_SSH_KEY" > $$HOME/.ssh/id_ed25519 && chmod 600 $$HOME/.ssh/id_ed25519
-      - echo "$$SSH_HOST_KEY" > $$HOME/.ssh/known_hosts
-      # SSH uses HOME from /etc/passwd, not from the environment, so override it
-      - export SSHOPTS="-o UserKnownHostsFile=$$HOME/.ssh/known_hosts -i $$HOME/.ssh/id_ed25519"
-      - "echo DEBUG: Using NIX_FLAGS: $$NIX_FLAGS"
-      - nix $$NIX_FLAGS develop --command deploy --magic-rollback false --skip-checks --targets '.#host_001_momo_koeln' --ssh-opts="$$SSHOPTS"
+      - nix $$NIX_FLAGS develop --command treefmt --fail-on-change
+      - nix $$NIX_FLAGS develop --command editorconfig-checker
+      - nix $$NIX_FLAGS build ".#nixosConfigurations.PubSolarOS.config.system.build.toplevel"
 
 ---
 kind: pipeline
@@ -96,6 +78,9 @@ steps:
         from_secret: matrix_password
       template: "Test run triggered by tag: {{ build.tag }}. Test run exit status: {{ build.status }}. Artifacts uploaded to Manta: https://eu-central.manta.greenbaum.cloud/pub_solar/public/ci/{{ repo.Owner }}/{{ repo.Name }}/{{ build.number }}/foot_wayland_info.png"
 
+depends_on:
+  - Tests
+
 trigger:
   ref:
     - refs/tags/v*
@@ -149,6 +134,9 @@ steps:
       unlink_first: true
       strip_components: 3
 
+depends_on:
+  - Check
+
 trigger:
   branch:
     - main
@@ -161,6 +149,6 @@ volumes:
 
 ---
 kind: signature
-hmac: a600be61980312efec74374647cdff7e3876a7858caf51433a8b76148312edc1
+hmac: a116f78a0b22188052893bdb46aa40f8de66438826c10ced362ea183d7644d67
 
 ...

.editorconfig

@@ -15,6 +15,9 @@ end_of_line = unset
 insert_final_newline = unset
 trim_trailing_whitespace = unset
 indent_size = unset
+charset = unset
+indent_style = unset
+indent_size = unset
 
 [{.*,secrets}/**]
 end_of_line = unset

CONTRIBUTING.md

@@ -0,0 +1,33 @@
+# Quick branch overview
+
+We work with several branches in this repo. This document aims to explain how
+to contribute changes to the existing branches.
+
+### `main` branch
+
+- Changes to `modules` and `profiles` should go [the main branch](https://git.pub.solar/pub-solar/os/src/branch/main)
+- Changes can get accepted via: Pull Request
+- Branch protected from direct `git push`
+
+### `infra` branch
+
+- Changes to the [pub.solar](https://pub.solar) infrastructure should be merged [into this branch](https://git.pub.solar/pub-solar/os/src/branch/infra)
+- Changes can get accepted via: Pull Request
+- Branch protected from direct `git push`
+
+### `momo/main` branch
+
+- Changes to the [Momo](https://momo.koeln) infrastructure should be merged [into this branch](https://git.pub.solar/pub-solar/os/src/branch/momo/main)
+- Changes can get accepted via: Pull Request
+- Deployment of changes is [automatic via CI pipeline](https://git.pub.solar/pub-solar/os/src/commit/43bd7421509f7cc9ba06d7c740f3f536a4a2af76/.drone.yml#L20-L38)
+- Branch protected from direct `git push`
+
+### `$USER` branches
+
+- User's custom hosts and changes can be worked on in these branches
+- Direct `git push` possible
+- Examples:
+  - [hensoko](https://git.pub.solar/pub-solar/os/src/branch/hensoko)
+  - [b12f](https://git.pub.solar/pub-solar/os/src/branch/b12f)
+  - [axeman](https://git.pub.solar/pub-solar/os/src/branch/axeman)
+  - [teutat3s](https://git.pub.solar/pub-solar/os/src/branch/teutat3s)

README.md

@@ -38,7 +38,7 @@ _PubSolarOS_:
   as much non-free software as you like.
 - Automation is better. The reproducibility of nix feels so much more
   powerful once you're deploying your new configuration from your laptop
-  to all your other devices with one command. [We have an automated CI using drone](https://ci.b12f.io/pub-solar/os).
+  to all your other devices with one command. [We have an automated CI using drone](https://ci.pub.solar/pub-solar/os).
 - Community is important. We just like working on this together, and it
   feels really good to see our progress at the end of a
   [hakken.irl](https://pub.solar/hakken) session.

flake.lock

@@ -10,11 +10,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1675176355,
-        "narHash": "sha256-Qjxh5cmN56siY97mzmBLI1+cdjXSPqmfPVsKxBvHmwI=",
+        "lastModified": 1682101079,
+        "narHash": "sha256-MdAhtjrLKnk2uiqun1FWABbKpLH090oeqCSiWemtuck=",
         "owner": "ryantm",
         "repo": "agenix",
-        "rev": "b7ffcfe77f817d9ee992640ba1f270718d197f28",
+        "rev": "2994d002dcff5353ca1ac48ec584c7f6589fe447",
         "type": "github"
       },
       "original": {
@@ -30,11 +30,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1673295039,
-        "narHash": "sha256-AsdYgE8/GPwcelGgrntlijMg4t3hLFJFCRF3tL5WVjA=",
+        "lastModified": 1696360011,
+        "narHash": "sha256-HpPv27qMuPou4acXcZ8Klm7Zt0Elv9dgDvSJaomWb9Y=",
         "owner": "LnL7",
         "repo": "nix-darwin",
-        "rev": "87b9d090ad39b25b2400029c64825fc2a8868943",
+        "rev": "8b6ea26d5d2e8359d06278364f41fbc4b903b28a",
         "type": "github"
       },
       "original": {
@@ -54,11 +54,11 @@
         "utils": "utils"
       },
       "locked": {
-        "lastModified": 1674127017,
-        "narHash": "sha256-QO1xF7stu5ZMDLbHN30LFolMAwY6TVlzYvQoUs1RD68=",
+        "lastModified": 1695052866,
+        "narHash": "sha256-agn7F9Oww4oU6nPiw+YiYI9Xb4vOOE73w8PAoBRP4AA=",
         "owner": "serokell",
         "repo": "deploy-rs",
-        "rev": "8c9ea9605eed20528bf60fae35a2b613b901fd77",
+        "rev": "e3f41832680801d0ee9e2ed33eb63af398b090e9",
         "type": "github"
       },
       "original": {
@@ -197,35 +197,50 @@
         "type": "github"
       }
     },
+    "fork": {
+      "locked": {
+        "lastModified": 1692960587,
+        "narHash": "sha256-39SKGdhn8jKKkdqhULbCvQOpdUPE9NNJpy5HTB++Jvg=",
+        "owner": "teutat3s",
+        "repo": "nixpkgs",
+        "rev": "312709dd70684f52496580e533d58645526b1c90",
+        "type": "github"
+      },
+      "original": {
+        "owner": "teutat3s",
+        "ref": "nvfetcher-fix",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
     "home": {
       "inputs": {
         "nixpkgs": [
           "nixos"
-        ],
-        "utils": "utils_2"
+        ]
       },
       "locked": {
-        "lastModified": 1674440933,
-        "narHash": "sha256-CASRcD/rK3fn5vUCti3jzry7zi0GsqRsBohNq9wPgLs=",
+        "lastModified": 1695108154,
+        "narHash": "sha256-gSg7UTVtls2yO9lKtP0yb66XBHT1Fx5qZSZbGMpSn2c=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "65c47ced082e3353113614f77b1bc18822dc731f",
+        "rev": "07682fff75d41f18327a871088d20af2710d4744",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
-        "ref": "release-22.11",
+        "ref": "release-23.05",
         "repo": "home-manager",
         "type": "github"
       }
     },
     "latest": {
       "locked": {
-        "lastModified": 1675115703,
-        "narHash": "sha256-4zetAPSyY0D77x+Ww9QBe8RHn1akvIvHJ/kgg8kGDbk=",
+        "lastModified": 1696604326,
+        "narHash": "sha256-YXUNI0kLEcI5g8lqGMb0nh67fY9f2YoJsILafh6zlMo=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "2caf4ef5005ecc68141ecb4aac271079f7371c44",
+        "rev": "87828a0e03d1418e848d3dd3f3014a632e4a4f64",
         "type": "github"
       },
       "original": {
@@ -237,27 +252,27 @@
     },
     "nixos": {
       "locked": {
-        "lastModified": 1675154384,
-        "narHash": "sha256-gUXzyTS3WsO3g2Rz0qOYR2a26whkyL2UfTr1oPH9mm8=",
+        "lastModified": 1696697597,
+        "narHash": "sha256-q26Qv4DQ+h6IeozF2o1secyQG0jt2VUT3V0K58jr3pg=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "0218941ea68b4c625533bead7bbb94ccce52dceb",
+        "rev": "5a237aecb57296f67276ac9ab296a41c23981f56",
         "type": "github"
       },
       "original": {
         "owner": "nixos",
-        "ref": "nixos-22.11",
+        "ref": "nixos-23.05",
         "repo": "nixpkgs",
         "type": "github"
       }
     },
     "nixos-hardware": {
       "locked": {
-        "lastModified": 1674550793,
-        "narHash": "sha256-ljJlIFQZwtBbzWqWTmmw2O5BFmQf1A/DspwMOQtGXHk=",
+        "lastModified": 1696614066,
+        "narHash": "sha256-nAyYhO7TCr1tikacP37O9FnGr2USOsVBD3IgvndUYjM=",
         "owner": "nixos",
         "repo": "nixos-hardware",
-        "rev": "b7ac0a56029e4f9e6743b9993037a5aaafd57103",
+        "rev": "bb2db418b616fea536b1be7f6ee72fb45c11afe0",
         "type": "github"
       },
       "original": {
@@ -289,6 +304,7 @@
         "deploy": "deploy",
         "digga": "digga",
         "flake-compat": "flake-compat",
+        "fork": "fork",
         "home": "home",
         "latest": "latest",
         "nixos": "nixos",
@@ -309,21 +325,6 @@
         "repo": "flake-utils",
         "type": "github"
       }
-    },
-    "utils_2": {
-      "locked": {
-        "lastModified": 1667395993,
-        "narHash": "sha256-nuEHfE/LcWyuSWnS8t12N1wc105Qtau+/OdUAjtQ0rA=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "5aed5285a952e0b949eb3ba02c12fa4fcfef535f",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
-      }
     }
   },
   "root": "root",

flake.nix

@@ -5,9 +5,11 @@
 
   inputs = {
     # Track channels with commits tested and built by hydra
-    nixos.url = "github:nixos/nixpkgs/nixos-22.11";
+    nixos.url = "github:nixos/nixpkgs/nixos-23.05";
     latest.url = "github:nixos/nixpkgs/nixos-unstable";
 
+    fork.url = "github:teutat3s/nixpkgs/nvfetcher-fix";
+
     flake-compat.url = "github:edolstra/flake-compat";
     flake-compat.flake = false;
 
@@ -19,7 +21,7 @@
     digga.inputs.darwin.follows = "darwin";
     digga.inputs.flake-compat.follows = "flake-compat";
 
-    home.url = "github:nix-community/home-manager/release-22.11";
+    home.url = "github:nix-community/home-manager/release-23.05";
     home.inputs.nixpkgs.follows = "nixos";
 
     darwin.url = "github:LnL7/nix-darwin";
@@ -54,14 +56,22 @@
         # allowUnfree = true;
       };
 
-      supportedSystems = ["x86_64-linux" "aarch64-linux"];
+      supportedSystems = ["x86_64-linux" "aarch64-linux" "aarch64-darwin"];
 
       channels = {
         nixos = {
           imports = [(digga.lib.importOverlays ./overlays)];
-          overlays = [];
+          overlays = [
+            (self: super: {
+              deploy-rs = {
+                inherit (inputs.nixos.legacyPackages.x86_64-linux) deploy-rs;
+                lib = inputs.deploy.lib.x86_64-linux;
+              };
+            })
+          ];
         };
         latest = {};
+        fork = {};
       };
 
       lib = import ./lib {lib = digga.lib // nixos.lib;};
@@ -105,10 +115,10 @@
           };
           PubSolarOS = {
             tests = [
-              (import ./tests/first-test.nix {
-                pkgs = nixos.legacyPackages.x86_64-linux;
-                lib = nixos.lib;
-              })
+              #(import ./tests/first-test.nix {
+              #  pkgs = nixos.legacyPackages.x86_64-linux;
+              #  lib = nixos.lib;
+              #})
             ];
           };
         };
@@ -119,9 +129,10 @@
               users = digga.lib.rakeLeaves ./users;
             };
           suites = with profiles; rec {
-            base = [ base-user users.root users.barkeeper ];
-
-            host_001_momo_koeln = base;
+            base = [users.pub-solar users.root];
+            iso = base ++ [base-user graphical pub-solar-iso];
+            pubsolaros = [full-install base-user users.root];
+            anonymous = [pubsolaros users.pub-solar];
           };
         };
       };
@@ -136,10 +147,10 @@
           };
         };
         users = {
-          barkeeper = {suites, ...}: {
+          pub-solar = {suites, ...}: {
             imports = suites.base;
 
-            home.stateVersion = "22.05";
+            home.stateVersion = "21.03";
           };
         }; # digga.lib.importers.rakeLeaves ./users/hm;
       };
@@ -149,10 +160,16 @@
       homeConfigurations = digga.lib.mkHomeConfigurations self.nixosConfigurations;
 
       deploy.nodes = digga.lib.mkDeployNodes self.nixosConfigurations {
-        host_001_momo_koeln = {
-          hostname = "80.244.242.4";
-          sshUser = "barkeeper";
-        };
+        #example = {
+        #  hostname = "example.com:22";
+        #  sshUser = "bartender";
+        #  fastConnect = true;
+        #  profilesOrder = ["system" "direnv"];
+        #  profiles.direnv = {
+        #    user = "bartender";
+        #    path = self.pkgs.x86_64-linux.nixos.deploy-rs.lib.x86_64-linux.activate.home-manager self.homeConfigurationsPortable.x86_64-linux.bartender;
+        #  };
+        #};
       };
     };
 }

hosts/PubSolarOS.nix

@@ -0,0 +1,21 @@
+{suites, ...}: {
+  ### root password is empty by default ###
+  ### default password: pub-solar, optional: add your SSH keys
+  imports =
+    suites.iso;
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.networkmanager.enable = true;
+
+  fileSystems."/" = {device = "/dev/disk/by-label/nixos";};
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "22.05"; # Did you read the comment?
+}

hosts/bootstrap.nix

@@ -0,0 +1,54 @@
+{
+  config,
+  lib,
+  pkgs,
+  profiles,
+  ...
+}:
+with lib; let
+  # Gets hostname of host to be bundled inside iso
+  # Copied from https://github.com/divnix/digga/blob/30ffa0b02272dc56c94fd3c7d8a5a0f07ca197bf/modules/bootstrap-iso.nix#L3-L11
+  getFqdn = config: let
+    net = config.networking;
+    fqdn =
+      if (net ? domain) && (net.domain != null)
+      then "${net.hostName}.${net.domain}"
+      else net.hostName;
+  in
+    fqdn;
+in {
+  # build with: `nix build ".#nixosConfigurations.bootstrap.config.system.build.isoImage"`
+  imports = [
+    # profiles.networking
+    profiles.users.root # make sure to configure ssh keys
+    profiles.users.pub-solar
+    profiles.base-user
+    profiles.graphical
+    profiles.pub-solar-iso
+  ];
+
+  config = {
+    boot.loader.systemd-boot.enable = true;
+
+    # will be overridden by the bootstrapIso instrumentation
+    fileSystems."/" = {device = "/dev/disk/by-label/nixos";};
+
+    system.nixos.label = "PubSolarOS-" + config.system.nixos.version;
+
+    # mkForce because a similar transformation gets double applied otherwise
+    # https://github.com/divnix/digga/blob/30ffa0b02272dc56c94fd3c7d8a5a0f07ca197bf/modules/bootstrap-iso.nix#L17
+    # https://github.com/NixOS/nixpkgs/blob/aecd4d8349b94f9bd5718c74a5b789f233f67326/nixos/modules/installer/cd-dvd/installation-cd-base.nix#L21-L22
+    isoImage = {
+      isoBaseName = mkForce (getFqdn config);
+      isoName = mkForce "${config.system.nixos.label}-${config.isoImage.isoBaseName}-${pkgs.stdenv.hostPlatform.system}.iso";
+    };
+
+    # This value determines the NixOS release from which the default
+    # settings for stateful data, like file locations and database versions
+    # on your system were taken. It‘s perfectly fine and recommended to leave
+    # this value at the release version of the first install of this system.
+    # Before changing this value read the documentation for this option
+    # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+    system.stateVersion = "21.05"; # Did you read the comment?
+  };
+}

hosts/host_001_momo_koeln/caddy.nix

@@ -1,26 +0,0 @@
-{
-  config,
-  ...
-}: {
-  # Changing the Caddyfile should only trigger a reload, not a restart
-  systemd.services.caddy.reloadTriggers = [
-    config.services.caddy.configFile
-  ];
-
-  services.caddy = {
-    enable = true;
-    email = "wg-tooling@list.momo.koeln";
-    virtualHosts = {
-      "auth.momo.koeln" = {
-        logFormat = ''
-          output discard
-        '';
-        extraConfig = ''
-          reverse_proxy :8080
-        '';
-      };
-    };
-  };
-
-  networking.firewall.allowedTCPPorts = [80 443];
-}

hosts/host_001_momo_koeln/configuration.nix

@@ -1,33 +0,0 @@
-{ config, lib, pkgs, ... }:
-
-{
-  imports =
-    [
-      # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-
-      ./caddy.nix
-      ./keycloak.nix
-    ];
-
-  pub-solar.core.lite = true;
-
-  time.timeZone = "Europe/Berlin";
-
-  networking = {
-    useDHCP = false;
-
-    interfaces.enp1s0.ipv4.addresses = [{
-      address = "80.244.242.4";
-      prefixLength = 29;
-    }];
-
-    defaultGateway = "80.244.242.1";
-    nameservers = [ "95.129.51.51" "80.244.244.244" ];
-  };
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = true;
-
-  system.stateVersion = "22.05";
-}

hosts/host_001_momo_koeln/default.nix

@@ -1,6 +0,0 @@
-{ suites, ... }:
-{
-  imports = [
-    ./host_001_momo_koeln.nix
-  ] ++ suites.host_001_momo_koeln;
-}

hosts/host_001_momo_koeln/hardware-configuration.nix

@@ -1,57 +0,0 @@
-{
-  config,
-  pkgs,
-  lib,
-  ...
-}: {
-  # Use the GRUB 2 boot loader.
-  boot.loader.systemd-boot.enable = false;
-  boot.loader.grub.enable = true;
-  boot.loader.grub.version = 2;
-  # boot.loader.grub.efiSupport = true;
-  # boot.loader.grub.efiInstallAsRemovable = true;
-  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-  # Define on which hard drive you want to install Grub.
-  boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
-
-  boot.initrd.availableKernelModules = ["ahci" "xhci_pci" "virtio_pci" "sd_mod" "sr_mod" "dm-snapshot"];
-  boot.initrd.kernelModules = [];
-  boot.kernelModules = ["kvm-intel"];
-  boot.extraModulePackages = [];
-
-  boot.initrd.luks.devices."cryptroot" = {
-    device = "/dev/disk/by-uuid/531ee357-5777-498f-abbf-64bb4cff9a14";
-  };
-
-  fileSystems."/" = {
-    device = "/dev/disk/by-uuid/f5b3152a-a3bd-46d1-968f-53d50fca921e";
-    fsType = "ext4";
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/1fd053f8-725b-418d-aed1-aee71dac2b62";
-    fsType = "ext4";
-  };
-
-  swapDevices = [
-    {device = "/dev/disk/by-uuid/967d1933-131d-4b56-8aa9-15c11ff940c9";}
-  ];
-
-  networking = {
-    defaultGateway = "80.244.242.1";
-
-    nameservers = ["95.129.51.51" "80.244.244.244"];
-
-    interfaces."enp1s0" = {
-      ipv4.addresses = [
-        {
-          address = "80.244.242.4";
-          prefixLength = 29;
-        }
-      ];
-    };
-  };
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}

hosts/host_001_momo_koeln/host_001_momo_koeln.nix

@@ -1,12 +0,0 @@
-{ config, pkgs, lib, ... }:
-with lib;
-with pkgs;
-let
-  psCfg = config.pub-solar;
-in
-{
-  imports = [
-    ./configuration.nix
-  ];
-
-}

hosts/host_001_momo_koeln/keycloak.nix

@@ -1,25 +0,0 @@
-{
-  config,
-  lib,
-  inputs,
-  pkgs,
-  self,
-  ...
-}: {
-  age.secrets.keycloak-database-password = {
-    file = "${self}/secrets/keycloak-database-password.age";
-    mode = "700";
-  };
-
-  # keycloak
-  services.keycloak = {
-    enable = true;
-    database.passwordFile = config.age.secrets.keycloak-database-password.path;
-    settings = {
-      hostname = "auth.momo.koeln";
-      http-host = "127.0.0.1";
-      http-port = 8080;
-      proxy = "edge";
-    };
-  };
-}

modules/audio/default.nix

@@ -66,31 +66,31 @@ in {
 
     # rtkit is optional but recommended
     security.rtkit.enable = true;
-    # Enable sound using pipewire-pulse
+    # Enable sound using pipewire-pulse, default config:
+    # https://gitlab.freedesktop.org/pipewire/pipewire/-/blob/master/src/daemon/pipewire.conf.in
     services.pipewire = {
       enable = true;
       alsa.enable = true;
       alsa.support32Bit = true;
       pulse.enable = true;
-
-      config.pipewire = {
-        context.default.clock = {
-          allowed-rates = [44100 48000 88200 96000];
-          rate = 44100;
-        };
-      };
-      config.pipewire-pulse = builtins.fromJSON (builtins.readFile ./pipewire-pulse.conf.json);
     };
 
-    # Bluetooth configuration using wireplumber
-    # https://nixos.wiki/wiki/PipeWire#Bluetooth_Configuration
-    environment.etc = mkIf cfg.bluetooth.enable {
-      "wireplumber/bluetooth.lua.d/51-bluez-config.lua".text = ''
-        bluez_monitor.properties = {
-          ["bluez5.enable-sbc-xq"] = true,
-          ["bluez5.enable-msbc"] = true,
-          ["bluez5.enable-hw-volume"] = true,
-          ["bluez5.headset-roles"] = "[ hsp_hs hsp_ag hfp_hf hfp_ag ]"
+    # Make pulseaudio listen on port 4713 for mopidy, extending the default
+    # config: https://gitlab.freedesktop.org/pipewire/pipewire/-/blob/master/src/daemon/pipewire-pulse.conf.in
+    environment.etc = mkIf cfg.mopidy.enable {
+      "pipewire/pipewire-pulse.conf.d/99-custom.conf".text = ''
+        {
+          "context.modules": [
+            {
+              "name": "libpipewire-module-protocol-pulse",
+              "args": {
+                "server.address": ["unix:native", "tcp:4713"],
+                "vm.overrides": {
+                  "pulse.min.quantum": "1024/48000"
+                }
+              }
+            }
+          ]
         }
       '';
     };
@@ -98,10 +98,19 @@ in {
     # Enable bluetooth
     hardware.bluetooth = mkIf cfg.bluetooth.enable {
       enable = true;
-      # disable useless SIM Access Profile plugin
+      # Disable bluetooth on startup to save battery
+      powerOnBoot = false;
+      # Disable useless SIM Access Profile plugin
       disabledPlugins = [
         "sap"
       ];
+      settings = {
+        General = {
+          # Enables experimental features and interfaces.
+          # Makes BlueZ Battery Provider available
+          Experimental = true;
+        };
+      };
     };
     services.blueman.enable = mkIf cfg.bluetooth.enable true;
 

modules/audio/pipewire-pulse.conf.json

@@ -1,36 +0,0 @@
-{
-  "context.properties": {},
-  "context.spa-libs": {
-    "audio.convert.*": "audioconvert/libspa-audioconvert",
-    "support.*": "support/libspa-support"
-  },
-  "context.modules": [
-    {
-      "name": "libpipewire-module-rtkit",
-      "args": {},
-      "flags": ["ifexists", "nofail"]
-    },
-    {
-      "name": "libpipewire-module-protocol-native"
-    },
-    {
-      "name": "libpipewire-module-client-node"
-    },
-    {
-      "name": "libpipewire-module-adapter"
-    },
-    {
-      "name": "libpipewire-module-metadata"
-    },
-    {
-      "name": "libpipewire-module-protocol-pulse",
-      "args": {
-        "server.address": ["unix:native", "tcp:4713"],
-        "vm.overrides": {
-          "pulse.min.quantum": "1024/48000"
-        }
-      }
-    }
-  ],
-  "stream.properties": {}
-}

modules/compat/default.nix

@@ -1,12 +0,0 @@
-{
-  config,
-  pkgs,
-  lib,
-  ...
-}:
-with lib; {
-  # Both things below are for
-  # https://github.com/NixOS/nixpkgs/issues/124215
-  documentation.info.enable = lib.mkForce false;
-  nix.settings.extra-sandbox-paths = ["/bin/sh=${pkgs.bash}/bin/sh"];
-}

modules/core/boot.nix

@@ -36,7 +36,7 @@ in {
       loader.systemd-boot.enable = lib.mkDefault true;
 
       # Use latest LTS linux kernel by default
-      kernelPackages = lib.mkDefault pkgs.linuxPackages_5_15;
+      kernelPackages = lib.mkDefault pkgs.linuxPackages_6_1;
 
       # Support ntfs drives
       supportedFilesystems = ["ntfs"];

modules/core/packages.nix

@@ -24,6 +24,7 @@ in {
         openssh
         curl
         htop
+        btop
         lsof
         psmisc
         file

modules/core/services.nix

@@ -10,7 +10,7 @@
     # If you don't want the host to have SSH actually opened up to the net,
     # set `services.openssh.openFirewall` to false in your config.
     openFirewall = lib.mkDefault true;
-    passwordAuthentication = lib.mkDefault false;
+    settings.PasswordAuthentication = lib.mkDefault false;
   };
 
   # Service that makes Out of Memory Killer more effective

modules/docker-ci-runner/default.nix

@@ -1,7 +1,11 @@
-{ lib, config, pkgs, self, ... }:
-
-with lib;
-let
+{
+  lib,
+  config,
+  pkgs,
+  self,
+  ...
+}:
+with lib; let
   bootstrap = pkgs.writeScript "bootstrap.sh" ''
     #!/usr/bin/env bash
 
@@ -40,8 +44,7 @@ let
   '';
   psCfg = config.pub-solar;
   cfg = config.pub-solar.docker-ci-runner;
-in
-{
+in {
   options.pub-solar.docker-ci-runner = {
     enable = lib.mkEnableOption "Enables a docker container running a drone exec runner as unprivileged user.";
 
@@ -88,7 +91,7 @@ in
           image = "debian";
           autoStart = true;
           entrypoint = "bash";
-          cmd = [ "/bootstrap.sh" ];
+          cmd = ["/bootstrap.sh"];
 
           volumes = [
             "${cfg.runnerVarsFile}:/run/vars"
@@ -98,9 +101,14 @@ in
 
           environment = cfg.runnerEnvironment;
 
-          extraOptions = lib.mkIf cfg.enableKvm [ "--device=/dev/kvm" ];
+          extraOptions = lib.mkIf cfg.enableKvm ["--device=/dev/kvm"];
         };
       };
     };
+    # Fix container not stopping correctly and holding the system 120s upon
+    # shutdown / reboot
+    systemd.services.docker-drone-exec-runner.preStop = ''
+      docker stop drone-exec-runner
+    '';
   };
 }

modules/docker/default.nix

@@ -14,6 +14,7 @@ in {
 
   config = mkIf cfg.enable {
     virtualisation.docker.enable = true;
+    virtualisation.docker.package = pkgs.docker_24;
     users.users = with pkgs;
       pkgs.lib.setAttrByPath [psCfg.user.name] {
         extraGroups = ["docker"];

modules/graphical/default.nix

@@ -66,7 +66,7 @@ in {
 
     services.getty.autologinUser = mkIf cfg.autologin.enable (mkForce "${psCfg.user.name}");
 
-    qt5 = {
+    qt = {
       enable = true;
       platformTheme = "gtk2";
       style = "gtk2";
@@ -100,7 +100,7 @@ in {
         home.packages = [
           alacritty
           foot
-          chromium
+          ungoogled-chromium
           firefox-wayland
 
           flameshot

modules/graphical/network-manager-applet.service.nix

@@ -1,6 +1,6 @@
 pkgs: {
   Unit = {
-    Description = "Lightweight Wayland notification daemon";
+    Description = "Network Manager applet";
     BindsTo = ["sway-session.target"];
     After = ["sway-session.target"];
     # ConditionEnvironment requires systemd v247 to work correctly

modules/sway/config/config.d/custom-keybindings.conf

@@ -18,9 +18,6 @@ bindsym $mod+Shift+h exec psos help
 
 bindsym $mod+F2 exec firefox
 
-bindsym $mod+F3 exec $term -e vifm
-bindsym $mod+Shift+F3 exec gksu $term -e vifm
-
 bindsym $mod+F4 exec nautilus -w
 bindsym $mod+Shift+F4 exec signal-desktop --use-tray-icon
 

modules/sway/sway.service.nix

@@ -8,10 +8,10 @@
   };
   Service = {
     Type = "simple";
+    ExecStartPre = "${pkgs.systemd}/bin/systemctl --user unset-environment WAYLAND_DISPLAY DISPLAY";
     ExecStart = "${pkgs.sway}/bin/sway";
     Restart = "on-failure";
     RestartSec = "1";
     TimeoutStopSec = "10";
-    ExecStopPost = "${pkgs.systemd}/bin/systemctl --user unset-environment SWAYSOCK DISPLAY I3SOCK WAYLAND_DISPLAY";
   };
 }

modules/terminal-life/bash/default.nix

@@ -0,0 +1,112 @@
+{
+  config,
+  pkgs,
+  self,
+  ...
+}: let
+  psCfg = config.pub-solar;
+  xdg = config.home-manager.users."${psCfg.user.name}".xdg;
+in {
+  enable = true;
+
+  historyControl = ["ignorespace"];
+
+  # Run when initializing a login shell
+  profileExtra = ''
+    [ "$(tty)" = "/dev/tty1" ] && exec ${pkgs.sway-service}/bin/sway-service
+  '';
+
+  # Run when initializing an interactive shell
+  initExtra = ''
+    # Show current directory at the top in Alacritty
+    PROMPT_COMMAND='echo -e -n "\e]2;$(basename "$PWD" | sed "s/${psCfg.user.name}/~/")\e\\"'
+
+    # If a command is not found, show me where it is
+    source ${pkgs.nix-index}/etc/profile.d/command-not-found.sh
+
+    # Helps you navigate directories faster
+    # https://github.com/gsamokovarov/jump
+    eval "$(${pkgs.jump}/bin/jump shell --bind=z)"
+
+    eval "$(${pkgs.direnv}/bin/direnv hook bash)"
+
+    bind 'set show-all-if-ambiguous on'
+
+    # Syntax highlighting, auto suggestions, vim modes, etc.
+    # https://github.com/akinomyoga/ble.sh/wiki/Manual-A1-Installation#user-content-nixpkgs
+    source "$(blesh-share)"/ble.sh --attach=none
+    # ctrl + space to accept autocomplete suggestion
+    ble-bind -m 'auto_complete' -f 'C-@' 'auto_complete/insert-on-end'
+    # Meta (Alt) + Backspace to delete a word
+    ble-bind -m 'vi_imap' -f 'M-C-?' 'kill-backward-cword'
+    # Meta (Alt) + p to jump one word backwards
+    ble-bind -m 'vi_imap' -f M-p '@nomarked backward-uword'
+    ble-bind -m 'vi_imap' -f M-left '@nomarked backward-uword'
+    # Meta (Alt) + n to jump one word forwards
+    ble-bind -m 'vi_imap' -f M-n '@nomarked forward-uword'
+    ble-bind -m 'vi_imap' -f M-right '@nomarked forward-uword'
+    # Arrow up and Ctrl + p searches history for entered input
+    ble-bind -m 'vi_imap' -f up 'history-search-backward hide-status:immediate-accept:empty=emulate-readline:point=end'
+    ble-bind -m 'vi_imap' -f C-p 'history-search-backward hide-status:immediate-accept:empty=emulate-readline:point=end'
+    # Arrow down and Ctrl + n searches history for entered input
+    ble-bind -m 'vi_imap' -f down 'history-search-forward hide-status:immediate-accept:empty=emulate-readline:point=end'
+    ble-bind -m 'vi_imap' -f C-n 'history-search-forward hide-status:immediate-accept:empty=emulate-readline:point=end'
+
+    ble-face region_insert='fg=black,bg=navy'
+
+    function my/complete-load-hook {
+      bleopt complete_auto_delay=250
+    }
+    blehook/eval-after-load complete my/complete-load-hook
+
+    bleopt exec_elapsed_mark=
+    bleopt exec_errexit_mark=
+    bleopt filename_ls_colors="$LS_COLORS"
+
+    bleopt complete_menu_style=desc
+
+    # Bash vim mode keybindings
+    if [[ $- == *i* ]]; then # in interactive session
+      set -o vi
+
+      ble-bind -m vi_imap -f 'ENTER' 'vi_imap/complete'
+      ble-bind -m vi_imap -f 'TAB' 'vi_imap/complete'
+
+      ble-bind -m vi_imap -f 'j j' 'vi_imap/normal-mode'
+      ble-bind -m vi_imap -f 'ESC' 'vi_imap/normal-mode'
+
+      ble-bind -m vi_nmap -f 'h' 'vi_nmap/insert-mode'
+      ble-bind -m vi_nmap -f 'i' 'vi-command/backward-line'
+      ble-bind -m vi_nmap -f 'j' 'vi-command/backward-char'
+      ble-bind -m vi_nmap -f 'k' 'vi-command/forward-line'
+      ble-bind -m vi_nmap -f 'l' 'vi-command/forward-char'
+
+      ble-bind -m vi_imap -f 'C-c' discard-line
+    fi
+
+    # end of .bashrc
+    # Somehow we need to ensure starship starts later than ble.sh
+    # (possible packaging issue?)
+    # https://github.com/akinomyoga/ble.sh/issues/333
+    eval "$(${pkgs.starship}/bin/starship init bash)"
+
+    [[ ''${BLE_VERSION-} ]] && ble-attach
+  '';
+
+  shellAliases = {
+    nano = "nvim";
+    vi = "nvim";
+    vim = "nvim";
+    mutt = "neomutt";
+    ls = "exa";
+    la = "exa --group-directories-first -lag";
+    wget = "wget --hsts-file=$XDG_CACHE_HOME/wget-hsts";
+    irssi = "irssi --config=$XDG_CONFIG_HOME/irssi/config --home=$XDG_DATA_HOME/irssi";
+    drone = "DRONE_TOKEN=$(secret-tool lookup drone token) drone";
+    no = "manix \"\" | grep '^# ' | sed 's/^# \(.*\) (.*/\1/;s/ (.*//;s/^# //' | fzf --preview=\"manix '{}'\" | xargs manix";
+    # fix nixos-option
+    nixos-option = "nixos-option -I nixpkgs=${self}/lib/compat";
+    myip = "dig +short myip.opendns.com @208.67.222.222 2>&1";
+    nnn = "nnn -d -e -H -r";
+  };
+}

modules/terminal-life/default.nix

@@ -24,47 +24,54 @@ in {
   config = mkIf cfg.enable {
     programs.command-not-found.enable = false;
 
-    # Needed to get zsh completion for system packages (e.g. systemd).
-    environment.pathsToLink = ["/share/zsh"];
-
-    environment.shells = with pkgs; [
-      zsh
-    ];
-
     environment.systemPackages = with pkgs; [
       screen
     ];
 
+    # Starship is a fast and featureful shell prompt
+    # starship.toml has sane defaults that can be changed there
+    programs.starship = {
+      enable = true;
+      settings = import ./starship.toml.nix;
+    };
+
     home-manager = with pkgs;
       pkgs.lib.setAttrByPath ["users" psCfg.user.name] {
         home.packages = [
           ack
           asciinema
           bat
+          blesh
           exa
           fd
           gh
           glow
-          nnn
+          jump
+          (nnn.overrideAttrs (o: {
+            patches =
+              (o.patches or [])
+              ++ [
+                ./nnn/0001-feat-use-wasd-keybindings-for-jkli.patch
+              ];
+          }))
           powerline
           silver-searcher
-          vifm
           watson
         ];
 
-        programs.neovim = import ./nvim {
+        programs.bash = import ./bash {
           inherit config;
           inherit pkgs;
-          inherit lib;
+          inherit self;
         };
         programs.fzf = import ./fzf {
           inherit config;
           inherit pkgs;
         };
-        programs.zsh = import ./zsh {
+        programs.neovim = import ./nvim {
           inherit config;
           inherit pkgs;
-          inherit self;
+          inherit lib;
         };
       };
   };

modules/terminal-life/fzf/default.nix

@@ -10,5 +10,5 @@
     "--color=fg:#d3d1d4,header:#7accd7,info:#e5c463,pointer:#ef9062"
     "--color=marker:#ef9062,fg+:#303030,prompt:#e5c463,hl+:#7accd7"
   ];
-  enableZshIntegration = true;
+  enableBashIntegration = true;
 }

modules/terminal-life/nnn/0001-feat-use-wasd-keybindings-for-jkli.patch

@@ -0,0 +1,38 @@
+From a81ee68923412c0fb8fab46f2f918a7ec865b384 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Benjamin=20B=C3=A4dorf?= <hello@benjaminbaedorf.eu>
+Date: Sun, 9 Jul 2023 04:19:51 +0200
+Subject: [PATCH] feat: use wasd keybindings for jkli
+
+---
+ src/nnn.h | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/src/nnn.h b/src/nnn.h
+index d476ddd2..5f106987 100644
+--- a/src/nnn.h
++++ b/src/nnn.h
+@@ -131,7 +131,7 @@ struct key {
+ static struct key bindings[] = {
+ 	/* Back */
+ 	{ KEY_LEFT,       SEL_BACK },
+-	{ 'h',            SEL_BACK },
++	{ 'j',            SEL_BACK },
+ 	/* Inside or select */
+ 	{ KEY_ENTER,      SEL_OPEN },
+ 	{ '\r',           SEL_OPEN },
+@@ -139,10 +139,10 @@ static struct key bindings[] = {
+ 	{ KEY_RIGHT,      SEL_NAV_IN },
+ 	{ 'l',            SEL_NAV_IN },
+ 	/* Next */
+-	{ 'j',            SEL_NEXT },
++	{ 'k',            SEL_NEXT },
+ 	{ KEY_DOWN,       SEL_NEXT },
+ 	/* Previous */
+-	{ 'k',            SEL_PREV },
++	{ 'i',            SEL_PREV },
+ 	{ KEY_UP,         SEL_PREV },
+ 	/* Page down */
+ 	{ KEY_NPAGE,      SEL_PGDN },
+-- 
+2.40.1
+

modules/terminal-life/nvim/clipboard.vim

@@ -5,8 +5,8 @@
 let g:clipboard = {
       \   'name': 'wayland-strip-carriage',
       \   'copy': {
-      \      '+': 'wl-copy --foreground --type text/plain',
-      \      '*': 'wl-copy --foreground --type text/plain --primary',
+      \      '+': 'wl-copy --foreground --type text/plain --trim-newline',
+      \      '*': 'wl-copy --foreground --type text/plain --primary --trim-newline',
       \    },
       \   'paste': {
       \      '+': {-> systemlist('wl-paste --no-newline | tr -d "\r"')},

modules/terminal-life/nvim/default.nix

@@ -22,8 +22,10 @@ in {
 
   extraPackages = with pkgs;
     lib.mkIf (!cfg.lite) [
+      ansible-language-server
       ccls
       gopls
+      nixd
       nodejs
       nodePackages.bash-language-server
       nodePackages.dockerfile-language-server-nodejs
@@ -34,74 +36,142 @@ in {
       nodePackages.vue-language-server
       nodePackages.vscode-langservers-extracted
       nodePackages.yaml-language-server
-      python39Packages.python-lsp-server
+      python3Packages.python-lsp-server
       python3Full
-      solargraph
-      rnix-lsp
       rust-analyzer
+      solargraph
       terraform-ls
       universal-ctags
     ];
 
-  plugins = with pkgs.vimPlugins; [ ]
-  ++ lib.optionals (!cfg.lite) [
-    nvim-cmp
-    cmp-nvim-lsp
-    cmp_luasnip
-    luasnip
+  plugins = with pkgs.vimPlugins;
+    []
+    ++ lib.optionals (!cfg.lite) [
+      (pkgs.vimPlugins.nvim-treesitter.withPlugins (p: [
+        p.ini
+        p.json
+        p.json5
+        p.markdown
+        p.nix
+        p.toml
+        p.yaml
 
-    lsp_extensions-nvim
-    nvim-lspconfig
+        p.css
+        p.graphql
+        p.html
+        p.javascript
+        p.scss
+        p.tsx
+        p.typescript
+        p.vue
 
-    instant-nvim-nvfetcher
+        p.c
+        p.cpp
+        p.go
+        p.gomod
+        p.gosum
+        p.haskell
+        p.lua
+        p.php
+        p.python
+        p.ruby
+        p.rust
 
-    ack-vim
-    vim-airline
-    editorconfig-vim
-    nnn-vim
-    quick-scope
-    suda-vim
-    syntastic
-    vim-gutentags
-    vim-vinegar
-    vim-workspace-nvfetcher
+        p.vim
+        p.vimdoc
 
-    sonokai
-    vim-hybrid-material
-    vim-airline-themes
-    vim-apprentice-nvfetcher
+        p.passwd
+        p.sql
 
-    fugitive
-    vim-gitgutter
-    vim-rhubarb
-    vimagit-nvfetcher
+        p.diff
+        p.gitcommit
+        p.gitignore
+        p.git_config
+        p.gitattributes
+        p.git_rebase
 
-    fzf-vim
-    fzfWrapper
-    vim-highlightedyank
+        p.bash
+        p.dockerfile
+        p.make
+        p.ninja
+        p.terraform
+      ]))
 
-    vim-beautify-nvfetcher
-    vim-surround
+      # Dependencies for nvim-lspconfig
+      nvim-cmp
+      cmp-nvim-lsp
+      cmp_luasnip
+      luasnip
 
-    vim-bufkill
-    vim-sensible
+      # Quickstart configs for neovim LSP
+      lsp_extensions-nvim
+      nvim-lspconfig
 
-    ansible-vim
-    emmet-vim
-    rust-vim
-    vim-caddyfile-nvfetcher
-    vim-go
-    vim-javascript
-    vim-json
-    SchemaStore-nvim
-    vim-markdown
-    vim-nix
-    vim-nixhash
-    vim-ruby
-    vim-toml
-    vim-vue
-    yats-vim
-  ];
+      # Collaborative editing in Neovim using built-in capabilities
+      instant-nvim-nvfetcher
+
+      # Search functionality behind :Ack
+      ack-vim
+
+      # The status bar in the bottom of the screen with the mode indication and file location
+      vim-airline
+
+      # Automatically load editorconfig files in repos to configure nvim settings
+      editorconfig-vim
+
+      # File browser. Use <leader>n to access
+      nnn-vim
+
+      # Highlight characters when using f, F, t, and T
+      quick-scope
+
+      # Get sudo in vim; :SudaWrite <optional filename>
+      suda-vim
+
+      # Undo history etc. per project
+      vim-workspace-nvfetcher
+
+      # JSON schemas
+      SchemaStore-nvim
+
+      # Work with tags files
+      vim-gutentags
+
+      # Neovim colorschemes / themes
+      sonokai
+      vim-hybrid-material
+      vim-airline-themes
+      vim-apprentice-nvfetcher
+
+      # Git integrations
+      # A Git wrapper so awesome, it should be illegal
+      fugitive
+      # Shows git diff markers in the sign column
+      vim-gitgutter
+      # GitHub extension for fugitive
+      vim-rhubarb
+      # Ease your git workflow within Vim
+      vimagit-nvfetcher
+
+      # FZF fuzzy finder
+      fzf-vim
+      fzfWrapper
+      # Make the yanked region apparent
+      vim-highlightedyank
+
+      # :Beautify Code beautifier
+      vim-beautify-nvfetcher
+
+      # Unload, delete or wipe a buffer without closing the window
+      vim-bufkill
+      # Defaults everyone can agree on
+      vim-sensible
+
+      # emmet for vim: http://emmet.io/
+      emmet-vim
+      # Caddyfile syntax support for Vim
+      vim-caddyfile-nvfetcher
+    ];
 
   extraConfig = builtins.concatStringsSep "\n" [
     ''

modules/terminal-life/nvim/init.vim

@@ -101,3 +101,6 @@ if has("autocmd")
   au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
 endif
 
+nmap - :NnnPicker %<CR>
+nmap <leader>n :NnnPicker %<CR>
+nmap <leader>N :NnnPicker<CR>

modules/terminal-life/nvim/lsp.vim

@@ -81,6 +81,7 @@ lua <<EOF
   local use_denols_for_typescript = not(os.getenv('NVIM_USE_DENOLS') == nil)
 
   for lsp_key, lsp_settings in pairs({
+        'ansiblels', ---------------------------- Ansible
         'bashls', ------------------------------- Bash
         'ccls', --------------------------------- C / C++ / Objective-C
         'cssls', -------------------------------- CSS / SCSS / LESS
@@ -121,9 +122,9 @@ lua <<EOF
                 }
             }
         },
+        'nixd', --------------------------------- Nix
         'phpactor', ----------------------------- PHP
         'pylsp', -------------------------------- Python
-        'rnix', --------------------------------- Nix
         'solargraph', --------------------------- Ruby
         'rust_analyzer', ------------------------ Rust
         ['sqlls'] = {
@@ -147,7 +148,6 @@ lua <<EOF
                     ['schemas'] = {
                         ['https://json.schemastore.org/github-workflow'] = '.github/workflows/*.{yml,yaml}',
                         ['https://json.schemastore.org/github-action'] = '.github/action.{yml,yaml}',
-                        ['https://json.schemastore.org/ansible-stable-2.9'] = 'roles/tasks/*.{yml,yaml}',
                         ['https://json.schemastore.org/drone'] = '*.drone.{yml,yaml}',
                         ['https://json.schemastore.org/swagger-2.0'] = 'swagger.{yml,yaml}',
                     }

modules/terminal-life/nvim/plugins.vim

@@ -83,3 +83,5 @@ if executable('ag')
   let g:ackprg = 'ag --vimgrep'
 endif
 
+" nnn
+let g:nnn#command = 'nnn -d -e -H -r'

modules/terminal-life/nvim/ui.vim

@@ -1,4 +1,4 @@
-let g:base16_shell_path = $XDG_CONFIG_HOME . "/zsh/base16.sh"
+let g:base16_shell_path = $XDG_DATA_HOME . "/scripts/base16.sh"
 let base16colorspace = 256
 set termguicolors
 let g:sonokai_style = 'shusia'

modules/terminal-life/starship.toml.nix

@@ -0,0 +1,169 @@
+{
+  format = "$username$hostname$directory($git_branch$git_commit$git_state$git_status)($c$deno$golang$haskell$nodejs$php$python$ruby$rust$terraform[](fg:#F85E84 bg:#000000))($docker_context[](fg:#06969A))($container)$fill(\${custom.triton})$nix_shell$status[ |](fg:#F85E84)$line_break$character";
+
+  # Disable the blank line at the start of the prompt
+  add_newline = false;
+
+  # You can also replace your username with a neat symbol like  to save some space
+  username = {
+    style_user = "bg:#000000 fg:#F85E84";
+    style_root = "bg:#F85E84 fg:#000000";
+    format = ''[$user ]($style)'';
+  };
+
+  hostname = {
+    ssh_symbol = "";
+    trim_at = "";
+    style = "bg:#000000 fg:#F85E84";
+  };
+
+  character = {
+    success_symbol = "[❯](bold purple)";
+    error_symbol = "[✗](#FF4B00)";
+  };
+
+  status = {
+    disabled = false;
+    style = "#FF4B00";
+  };
+
+  fill = {
+    symbol = "-";
+    #style = "bold green";
+    style = "black";
+  };
+
+  directory = {
+    style = "#F85E84";
+    truncate_to_repo = false;
+    fish_style_pwd_dir_length = 1;
+    truncation_symbol = "…/";
+    format = "[](fg:black bg:#F85E84)[$path[$read_only](bg:$style fg:black)](bg:$style fg:black)[](fg:$style)";
+    read_only = " ";
+  };
+
+  # Here is how you can shorten some long paths by text replacement
+  # similar to mapped_locations in Oh My Posh:
+  directory.substitutions = {
+    "Documents" = " ";
+    "Downloads" = " ";
+    "Music" = " ";
+    "Pictures" = " ";
+  };
+  # Keep in mind that the order matters. For example:
+  # "Important Documents" = "  "
+  # will not be replaced, because "Documents" was already substituted before.
+  # So either put "Important Documents" before "Documents" or use the substituted version:
+  # "Important  " = "  "
+
+  c = {
+    symbol = " ";
+    style = "bg:#86BBD8";
+    format = ''[ $symbol ($version) ]($style)'';
+  };
+
+  #container = {};
+
+  custom = {
+    triton = {
+      command = "echo $TRITON_PROFILE";
+      when = "test $TRITON_PROFILE";
+      format = "[✚ ](fg:#F85E84 bg:#1A181A)[$output](fg:#F85E84 bg:#1A181A)";
+      description = "The current triton profile";
+    };
+  };
+
+  docker_context = {
+    symbol = " ";
+    style = "bg:#06969A";
+    format = ''[ $symbol $context ]($style) $path'';
+  };
+
+  #deno = {};
+
+  git_branch = {
+    style = "#E5C463";
+    format = "[](fg:black bg:$style)[ $symbol$branch](fg:black bg:$style)[](fg:$style)";
+    symbol = " ";
+  };
+
+  git_commit = {
+    style = "#E5C463";
+    # ^H is the literal backspace character which renders to \b in the final
+    # starship config TOML, produced in insert mode via ctrl+v then ctrl+h.
+    # We use the literal character, because escaping a single \ doesn't work
+    # with pkgs.formats.toml, see: https://github.com/NixOS/nixpkgs/issues/97310 and
+    # https://jdhao.github.io/2020/10/07/nvim_insert_unicode_char/
+    format = "[ ](bg:$style)[\\($hash$tag\\)](fg:black bg:$style)[](fg:$style)";
+  };
+
+  git_state = {
+    style = "#E5C463";
+    format = "[ ](bg:$style)[ \\($state( $progress_current/$progress_total)\\)](fg:black bg:$style)[](fg:$style)";
+  };
+
+  git_status = {
+    style = "#E5C463";
+    format = "([ ](bg:$style fg:black)$conflicted$staged$modified$renamed$deleted$untracked$stashed$ahead_behind[](fg:$style))";
+    conflicted = "[ ](bold fg:88 bg:#E5C463)[  \${count} ](fg:black bg:#E5C463)";
+    staged = "[ $count ](fg:black bg:#E5C463)";
+    modified = "[ \${count} ](fg:black bg:#E5C463)";
+    renamed = "[ \${count} ](fg:black bg:#E5C463)";
+    deleted = "[ \${count} ](fg:black bg:#E5C463)";
+    untracked = "[?\${count} ](fg:black bg:#E5C463)";
+    stashed = "[ \${count} ](fg:black bg:#E5C463)";
+    ahead = "[ \${count} ](fg:#523333 bg:#E5C463)";
+    behind = "[ \${count} ](fg:black bg:#E5C463)";
+    diverged = "[ ](fg:88 bg:#E5C463)[  ](fg:black bg:#E5C463)[ \${ahead_count} ](fg:black bg:#E5C463)[ \${behind_count} ](fg:black bg:#E5C463)";
+  };
+
+  golang = {
+    symbol = " ";
+    style = "bg:#86BBD8";
+    format = ''[ $symbol ($version) ]($style)'';
+  };
+
+  haskell = {
+    symbol = " ";
+    style = "bg:#86BBD8";
+    format = ''[ $symbol ($version) ]($style)'';
+  };
+
+  nix_shell = {
+    format = ''[$symbol]($style) '';
+    symbol = " ";
+  };
+
+  nodejs = {
+    symbol = "";
+    style = "bg:#86BBD8";
+    format = ''[ $symbol ($version) ]($style)'';
+  };
+
+  php = {
+    symbol = " ";
+  };
+
+  python = {
+    symbol = " ";
+  };
+
+  ruby = {
+    symbol = " ";
+  };
+
+  rust = {
+    symbol = "";
+    style = "bg:#86BBD8";
+    format = ''[ $symbol ($version) ]($style)'';
+  };
+
+  #terraform = {};
+
+  time = {
+    disabled = false;
+    time_format = "%R"; # Hour:Minute Format
+    style = "bg:#33658A";
+    format = ''[ ♥ $time ]($style)'';
+  };
+}

modules/terminal-life/zsh/default.nix

@@ -1,123 +0,0 @@
-{
-  config,
-  pkgs,
-  self,
-  ...
-}: let
-  psCfg = config.pub-solar;
-  xdg = config.home-manager.users."${psCfg.user.name}".xdg;
-in {
-  enable = true;
-  enableAutosuggestions = true;
-  enableCompletion = true;
-  dotDir = ".config/zsh";
-
-  history = {
-    ignoreDups = true;
-    expireDuplicatesFirst = true;
-    ignoreSpace = true;
-    path = "$HOME/.local/share/zsh/zsh_history";
-    save = 10000;
-    size = 10000;
-  };
-
-  loginExtra = ''
-    [ "$(tty)" = "/dev/tty1" ] && exec ${pkgs.sway-service}/bin/sway-service
-  '';
-
-  shellAliases = {
-    nano = "nvim";
-    vi = "nvim";
-    vim = "nvim";
-    mutt = "neomutt";
-    ls = "exa";
-    la = "exa --group-directories-first -lag";
-    fm = "vifm .";
-    vifm = "vifm .";
-    wget = "wget --hsts-file=$XDG_CACHE_HOME/wget-hsts";
-    irssi = "irssi --config=$XDG_CONFIG_HOME/irssi/config --home=$XDG_DATA_HOME/irssi";
-    drone = "DRONE_TOKEN=$(secret-tool lookup drone token) drone";
-    no = "manix \"\" | grep '^# ' | sed 's/^# \(.*\) (.*/\1/;s/ (.*//;s/^# //' | fzf --preview=\"manix '{}'\" | xargs manix";
-    # fix nixos-option
-    nixos-option = "nixos-option -I nixpkgs=${self}/lib/compat";
-    myip = "dig +short myip.opendns.com @208.67.222.222 2>&1";
-  };
-  plugins = [
-    # src gets fetched by nvfetcher, see: ./pkgs/sources.toml
-    {
-      # will source ohmyzsh/plugins/z/
-      name = "zsh-plugins-z";
-      file = "plugins/z/z.plugin.zsh";
-      src = pkgs.sources.ohmyzsh.src;
-    }
-    {
-      name = "zsh-powerlevel10k";
-      file = "powerlevel10k.zsh-theme";
-      src = pkgs.sources.powerlevel10k.src;
-    }
-    {
-      name = "zsh-fast-syntax-highlighting";
-      file = "F-Sy-H.plugin.zsh";
-      src = pkgs.sources.F-Sy-H.src;
-    }
-    {
-      name = "zsh-nix-shell";
-      file = "nix-shell.plugin.zsh";
-      src = pkgs.sources.zsh-nix-shell.src;
-    }
-  ];
-
-  initExtra =
-    ''
-      bindkey -v
-      bindkey -v 'jj' vi-cmd-mode
-      bindkey -a 'i' up-line
-      bindkey -a 'k' down-line
-      bindkey -a 'j' backward-char
-      bindkey -a 'h' vi-insert
-      bindkey '^[[H' beginning-of-line
-      bindkey '^[[F' end-of-line
-      bindkey '^R' history-incremental-pattern-search-backward
-      bindkey '^ ' autosuggest-accept
-      bindkey '^q' push-line-or-edit
-
-      bindkey '^R' fzf-history-widget
-
-      # ArrowUp/Down start searching history with current input
-      autoload -U up-line-or-beginning-search
-      autoload -U down-line-or-beginning-search
-      zle -N up-line-or-beginning-search
-      zle -N down-line-or-beginning-search
-      bindkey "^[[A" up-line-or-beginning-search
-      bindkey "^[[B" down-line-or-beginning-search
-      bindkey "^P" up-line-or-beginning-search
-      bindkey "^N" down-line-or-beginning-search
-
-      # MAKE CTRL+S WORK IN VIM
-      stty -ixon
-      stty erase '^?'
-
-      precmd () {
-        DIR_NAME=$(pwd | sed "s|^$HOME|~|g")
-        echo -e -n "\e]2;$DIR_NAME\e\\"
-
-        if [ $(date +%d%m) = '0104' ]; then
-          if [ $? -eq 0 ]; then
-            echo "Success! That was a great command! I can't wait to see what amazing stuff you'll be up to next."
-          fi
-        fi
-      }
-
-      # If a command is not found, show me where it is
-      source ${pkgs.nix-index}/etc/profile.d/command-not-found.sh
-    ''
-    + builtins.readFile ./base16.zsh
-    + builtins.readFile ./p10k.zsh
-    + ''
-      source ${pkgs.fzf}/share/fzf/key-bindings.zsh
-      source ${pkgs.fzf}/share/fzf/completion.zsh
-      source ${pkgs.git-bug}/share/zsh/site-functions/git-bug
-      eval "$(direnv hook zsh)"
-    ''
-    + builtins.readFile ./fzf.zsh;
-}

modules/terminal-life/zsh/fzf.zsh

@@ -1,58 +0,0 @@
-# Use ~~ as the trigger sequence instead of the default **
-export FZF_COMPLETION_TRIGGER='~~'
-
-# Options to fzf command
-export FZF_COMPLETION_OPTS='--border --info=inline'
-
-__fzfcmd() {
-  echo "fzf"
-}
-
-# ctrl+r - Paste the selected command from history into the command line
-fzf-history-widget() {
-  local selected num
-  setopt localoptions noglobsubst noposixbuiltins pipefail HIST_FIND_NO_DUPS 2> /dev/null
-
-  selected=( $(fc -rl 1 |
-    FZF_DEFAULT_OPTS="--height ${FZF_TMUX_HEIGHT:-40%} $FZF_DEFAULT_OPTS -n2..,.. --tiebreak=index --bind=ctrl-r:toggle-sort $FZF_CTRL_R_OPTS --query=${(qqq)LBUFFER} +m" $(__fzfcmd)) )
-  local ret=$?
-  if [ -n "$selected" ]; then
-    num=$selected[1]
-    if [ -n "$num" ]; then
-      zle vi-fetch-history -n $num
-    fi
-  fi
-  zle redisplay
-  typeset -f zle-line-init >/dev/null && zle zle-line-init
-  return $ret
-}
-zle     -N   fzf-history-widget
-bindkey '^R' fzf-history-widget
-
-# Use fd (https://github.com/sharkdp/fd) instead of the default find
-# command for listing path candidates.
-# - The first argument to the function ($1) is the base path to start traversal
-# - See the source code (completion.{bash,zsh}) for the details.
-_fzf_compgen_path() {
-  fd --hidden --follow --exclude ".git" . "$1"
-}
-
-# Use fd to generate the list for directory completion
-_fzf_compgen_dir() {
-  fd --type d --hidden --follow --exclude ".git" . "$1"
-}
-
-# (EXPERIMENTAL) Advanced customization of fzf options via _fzf_comprun function
-# - The first argument to the function is the name of the command.
-# - You should make sure to pass the rest of the arguments to fzf.
-_fzf_comprun() {
-  local command=$1
-  shift
-
-  case "$command" in
-    cd)           fzf "$@" --preview 'tree -C {} | head -200' ;;
-    export|unset) fzf "$@" --preview "eval 'echo \$'{}" ;;
-    ssh)          fzf "$@" --preview 'dig {}' ;;
-    *)            fzf "$@" ;;
-  esac
-}

modules/terminal-life/zsh/p10k.zsh

@@ -1,943 +0,0 @@
-# Generated by Powerlevel10k configuration wizard on 2020-04-18 at 01:15 CEST.
-# Based on romkatv/powerlevel10k/config/p10k-classic.zsh, checksum 30399.
-# Wizard options: powerline, classic, unicode, darkest, 24h time, angled separators,
-# sharp heads, sharp tails, 1 line, compact, concise, transient_prompt,
-# instant_prompt=verbose.
-# Type `p10k configure` to generate another config.
-#
-# Config for Powerlevel10k with classic powerline prompt style. Type `p10k configure` to generate
-# your own config based on it.
-#
-# Tip: Looking for a nice color? Here's a one-liner to print colormap.
-#
-#   for i in {0..255}; do print -Pn "%K{$i}  %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done
-
-# Temporarily change options.
-'builtin' 'local' '-a' 'p10k_config_opts'
-[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
-[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
-[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
-'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
-
-() {
-  emulate -L zsh -o extended_glob
-
-  # Unset all configuration options. This allows you to apply configuration changes without
-  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
-  unset -m 'POWERLEVEL9K_*'
-
-  # Zsh >= 5.1 is required.
-  autoload -Uz is-at-least && is-at-least 5.1 || return
-
-  # The list of segments shown on the left. Fill it with the most important segments.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
-    ssh
-    context
-    dir                     # current directory
-    vcs                     # git status
-    # prompt_char           # prompt symbol
-  )
-
-  # The list of segments shown on the right. Fill it with less important segments.
-  # Right prompt on the last prompt line (where you are typing your commands) gets
-  # automatically hidden when the input line reaches it. Right prompt above the
-  # last prompt line gets hidden if it would overlap with left prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
-    vi_mode                 # vi mode (you don't need this if you've enabled prompt_char)
-    status                  # exit code of the last command
-    command_execution_time  # duration of the last command
-    background_jobs         # presence of background jobs
-    direnv                  # direnv status (https://direnv.net/)
-    vim_shell               # vim shell indicator (:sh)
-    triton                  # show the current triton profile
-    nix_shell               # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
-    watson
-    # kubecontext             # current kubernetes context (https://kubernetes.io/)
-    # terraform               # terraform workspace (https://www.terraform.io)
-    # aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
-    # aws_eb_env              # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
-    # azure                   # azure account name (https://docs.microsoft.com/en-us/cli/azure)
-    # gcloud                  # google cloud cli account and project (https://cloud.google.com/)
-    # google_app_cred         # google application credentials (https://cloud.google.com/docs/authentication/production)
-    # context                 # user@hostname
-    # ranger                  # ranger shell (https://github.com/ranger/ranger)
-    # nnn                     # nnn shell (https://github.com/jarun/nnn)
-    # midnight_commander      # midnight commander shell (https://midnight-commander.org/)
-    # vpn_ip                # virtual private network indicator
-    # load                  # CPU load
-    # disk_usage            # disk usage
-    # ram                   # free RAM
-    # swap                  # used swap
-    # todo                    # todo items (https://github.com/todotxt/todo.txt-cli)
-    # timewarrior             # timewarrior tracking status (https://timewarrior.net/)
-    # taskwarrior             # taskwarrior task count (https://taskwarrior.org/)
-    # time                    # current time
-    # ip                    # ip address and bandwidth usage for a specified network interface
-    # public_ip             # public IP address
-    # proxy                 # system-wide http/https/ftp proxy
-    # battery               # internal battery
-    # wifi                  # wifi speed
-    # example               # example user-defined segment (see prompt_example function below)
-  )
-
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND="black"
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_BACKGROUND="yellow"
-  typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=""
-  typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING="CMD"
-
-  # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
-  typeset -g POWERLEVEL9K_MODE=powerline
-  # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
-  # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
-  typeset -g POWERLEVEL9K_ICON_PADDING=none
-
-  # When set to true, icons appear before content on both sides of the prompt. When set
-  # to false, icons go after content. If empty or not set, icons go before content in the left
-  # prompt and after content in the right prompt.
-  #
-  # You can also override it for a specific segment:
-  #
-  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
-  #
-  # Or for a specific segment in specific state:
-  #
-  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
-  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=
-
-  # Add an empty line before each prompt.
-  typeset -g POWERLEVEL9K_PROMPT_ON_NEWLINE=true
-  typeset -g POWERLEVEL9K_RPROMPT_ON_NEWLINE=false
-
-  # Connect left prompt lines with these symbols. You'll probably want to use the same color
-  # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=''
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%238F'
-  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%238F❯ '
-  # Connect right prompt lines with these symbols.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%238F'
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%238F'
-  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%238F'
-
-  # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
-  # '─'. The last two make it easier to see the alignment between left and right prompt and to
-  # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
-  # for more compact prompt if using using this option.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
-  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
-    # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
-    # ornaments defined above.
-    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=238
-    # Start filler from the edge of the screen if there are no left segments on the first line.
-    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
-    # End filler on the edge of the screen if there are no right segments on the first line.
-    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
-  fi
-
-  # Default background color.
-  typeset -g POWERLEVEL9K_BACKGROUND=none
-
-  # Separator between same-color segments on the left.
-  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='%242F\uE0B1'
-  # Separator between same-color segments on the right.
-  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='%242F\uE0B3'
-  # Separator between different-color segments on the left.
-  typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR='\uE0B0'
-  # Separator between different-color segments on the right.
-  typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
-  # The right end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
-  # The left end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
-  # The left end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
-  # The right end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
-  # Left prompt terminator for lines without any segments.
-  typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
-
-  #################################[ os_icon: os identifier ]##################################
-  # OS identifier color.
-  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=255
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐'
-
-  ################################[ prompt_char: prompt symbol ]################################
-  # Transparent background.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
-  # Green prompt symbol if the last command succeeded.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
-  # Red prompt symbol if the last command failed.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=17
-  # Default prompt symbol.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
-  # Prompt symbol in command vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
-  # Prompt symbol in visual vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='Ⅴ'
-  # Prompt symbol in overwrite vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
-  # No line terminator if prompt_char is the last segment.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
-  # No line introducer if prompt_char is the first segment.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
-  # No surrounding whitespace.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_{LEFT,RIGHT}_WHITESPACE=
-
-  ##################################[ dir: current directory ]##################################
-  typeset -g POWERLEVEL9K_{ETC,FOLDER,HOME,HOME_SUB}_ICON=
-  typeset -g POWERLEVEL9K_DIR_{ETC,HOME,HOME_SUBFOLDER,DEFAULT,NOT_WRITABLE}_BACKGROUND=1
-  typeset -g POWERLEVEL9K_DIR_{ETC,HOME,HOME_SUBFOLDER,DEFAULT,NOT_WRITABLE}_FOREGROUND=0
-  typeset -g POWERLEVEL9K_DIR_WRITABLE_FORBIDDEN_VISUAL_IDENTIFIER_COLOR=17
-
-  typeset -g POWERLEVEL9K_DIR_{ETC,DEFAULT}_BACKGROUND=15
-  typeset -g POWERLEVEL9K_DIR_{HOME,HOME_SUBFOLDER}_BACKGROUND=1
-  typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_BACKGROUND=1
-
-  # If directory is too long, shorten some of its segments to the shortest possible unique
-  # prefix. The shortened directory can be tab-completed to the original.
-  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
-  # Color of the shortened directory segments.
-  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=0
-  # Color of the anchor directory segments. Anchor segments are never shortened. The first
-  # segment is always an anchor.
-  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=0
-  # Display anchor directory segments in bold.
-  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
-  # Don't shorten directories that contain any of these files. They are anchors.
-  local anchor_files=(
-    .bzr
-    .citc
-    .git
-    .hg
-    .node-version
-    .python-version
-    .go-version
-    .ruby-version
-    .lua-version
-    .java-version
-    .perl-version
-    .php-version
-    .tool-version
-    .shorten_folder_marker
-    .svn
-    .terraform
-    CVS
-    Cargo.toml
-    composer.json
-    go.mod
-    package.json
-    stack.yaml
-  )
-  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
-  # If set to true, remove everything before the last (deepest) subdirectory that contains files
-  # matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
-  # /foo/bar/git_repo/baz, prompt will display git_repo/baz. This assumes that /foo/bar/git_repo
-  # contains a marker (.git) and other directories don't.
-  typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
-  # Don't shorten this many last directory segments. They are anchors.
-  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
-  # Shorten directory if it's longer than this even if there is space for it. The value can
-  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
-  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
-  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
-  # If set to `0`, directory will always be shortened to its minimum length.
-  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
-  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
-  # many columns for typing commands.
-  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
-  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
-  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
-  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
-  # If set to true, embed a hyperlink into the directory. Useful for quickly
-  # opening a directory in the file manager simply by clicking the link.
-  # Can also be handy when the directory is shortened, as it allows you to see
-  # the full directory that was used in previous commands.
-  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false
-
-  # Enable special styling for non-writable directories.
-  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
-  # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
-  # above must be set to true for this parameter to have effect.
-  typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='∅'
-
-  #####################################[ vcs: git status ]######################################
-  # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon.
-  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
-
-  # Untracked files icon. It's really a question mark, your font isn't broken.
-  # Change the value of this parameter to show a different icon.
-  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
-
-  # Formatter for Git status.
-  #
-  # Example output: master ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
-  #
-  # You can edit the function to customize how Git status looks.
-  #
-  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
-  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
-  function my_git_formatter() {
-    emulate -L zsh
-
-    if [[ -n $P9K_CONTENT ]]; then
-      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
-      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
-      typeset -g my_git_format=$P9K_CONTENT
-      return
-    fi
-
-    if (( $1 )); then
-      # Styling for up-to-date Git status.
-      local       meta='%0F'  # grey foreground
-      local      clean='%0F'   # green foreground
-      local   modified='%0F'  # yellow foreground
-      local  untracked='%0F'   # blue foreground
-      local conflicted='%0F'  # red foreground
-    else
-      # Styling for incomplete and stale Git status.
-      local       meta='%0F'  # grey foreground
-      local      clean='%0F'  # grey foreground
-      local   modified='%0F'  # grey foreground
-      local  untracked='%0F'  # grey foreground
-      local conflicted='%0F'  # grey foreground
-    fi
-
-    local res
-    local where  # branch or tag
-    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
-      res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}"
-      where=${(V)VCS_STATUS_LOCAL_BRANCH}
-    elif [[ -n $VCS_STATUS_TAG ]]; then
-      res+="${meta}#"
-      where=${(V)VCS_STATUS_TAG}
-    fi
-
-    # If local branch name or tag is at most 32 characters long, show it in full.
-    # Otherwise show the first 12 … the last 12.
-    # Tip: To always show local branch name in full without truncation, delete the next line.
-    (( $#where > 32 )) && where[13,-13]="…"
-    res+="${clean}${where//\%/%%}"  # escape %
-
-    # Display the current Git commit if there is no branch or tag.
-    # Tip: To always display the current Git commit, remove `[[ -z $where ]] &&` from the next line.
-    [[ -z $where ]] && res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"
-
-    # Show tracking branch name if it differs from local branch.
-    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
-      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"  # escape %
-    fi
-
-    # ⇣42 if behind the remote.
-    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
-    # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
-    (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
-    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
-    # ⇠42 if behind the push remote.
-    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
-    (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
-    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
-    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
-    # *42 if have stashes.
-    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
-    # 'merge' if the repo is in an unusual state.
-    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
-    # ~42 if have merge conflicts.
-    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
-    # +42 if have staged changes.
-    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
-    # !42 if have unstaged changes.
-    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
-    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
-    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
-    # Remove the next line if you don't want to see untracked files at all.
-    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
-    # "─" if the number of unstaged files is unknown. This can happen due to
-    # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
-    # than the number of files in the Git index, or due to bash.showDirtyState being set to false
-    # in the repository config. The number of staged and untracked files may also be unknown
-    # in this case.
-    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
-
-    typeset -g my_git_format=$res
-  }
-  functions -M my_git_formatter 2>/dev/null
-
-  # Don't count the number of unstaged, untracked and conflicted files in Git repositories with
-  # more than this many files in the index. Negative value means infinity.
-  #
-  # If you are working in Git repositories with tens of millions of files and seeing performance
-  # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
-  # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
-  # config: `git config bash.showDirtyState false`.
-  typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1
-
-  # Don't show Git status in prompt for repositories whose workdir matches this pattern.
-  # For example, if set to '~', the Git repository at $HOME/.git will be ignored.
-  # Multiple patterns can be combined with '|': '~|~/some/dir'.
-  typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'
-
-  # Disable the default Git status formatting.
-  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
-  # Install our own Git status formatter.
-  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
-  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
-  # Enable counters for staged, unstaged, etc.
-  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1
-
-  # Icon color.
-  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=4
-  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=4
-  # Custom icon.
-  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
-  # Custom prefix.
-  # typeset -g POWERLEVEL9K_VCS_PREFIX='%244Fon '
-
-  # Show status of repositories of these types. You can add svn and/or hg if you are
-  # using them. If you do, your prompt may become slow even when your current directory
-  # isn't in an svn or hg reposotiry.
-  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)
-
-  # These settings are used for respositories other than Git or when gitstatusd fails and
-  # Powerlevel10k has to fall back to using vcs_info.
-  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=0
-  typeset -g POWERLEVEL9K_VCS_CLEAN_BACKGROUND=2
-  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=0
-  typeset -g POWERLEVEL9K_VCS_UNTRACKED_BACKGROUND=3
-  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=0
-  typeset -g POWERLEVEL9K_VCS_MODIFIED_BACKGROUND=3
-
-  ##########################[ status: exit code of the last command ]###########################
-  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
-  # style them independently from the regular OK and ERROR state.
-  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true
-
-  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
-  # it will signify success by turning green.
-  typeset -g POWERLEVEL9K_STATUS_OK=true
-  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
-
-  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
-  # like this: 1|0.
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
-
-  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
-  # it will signify error by turning red.
-  typeset -g POWERLEVEL9K_STATUS_ERROR=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
-
-  # Status when the last command was terminated by a signal.
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
-  # Use terse signal names: "INT" instead of "SIGINT(2)".
-  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
-
-  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
-  # It may look like this: 1|0.
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
-
-  ###################[ command_execution_time: duration of the last command ]###################
-  # Show duration of the last command if takes longer than this many seconds.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
-  # Show this many fractional digits. Zero means round to seconds.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
-  # Execution time color.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=0
-  # Duration format: 1d 2h 3m 4s.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
-  # Custom icon.
-  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
-  # Custom prefix.
-  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%244Ftook '
-
-  #######################[ background_jobs: presence of background jobs ]#######################
-  # Don't show the number of background jobs.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
-  # Background jobs color.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=37
-  # Custom icon.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='≡'
-
-  #######################[ direnv: direnv status (https://direnv.net/) ]########################
-  # Direnv color.
-  typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=178
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]###############
-  # Default asdf color. Only used to display tools for which there is no color override (see below).
-  typeset -g POWERLEVEL9K_ASDF_FOREGROUND=66
-
-  # There are four parameters that can be used to hide asdf tools. Each parameter describes
-  # conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at
-  # least one parameter decides to hide a tool, that tool gets hidden. If no parameter decides to
-  # hide a tool, it gets shown.
-  #
-  # Special note on the difference between POWERLEVEL9K_ASDF_SOURCES and
-  # POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW. Consider the effect of the following commands:
-  #
-  #   asdf local  python 3.8.1
-  #   asdf global python 3.8.1
-  #
-  # After running both commands the current python version is 3.8.1 and its source is "local" as
-  # it takes precedence over "global". If POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW is set to false,
-  # it'll hide python version in this case because 3.8.1 is the same as the global version.
-  # POWERLEVEL9K_ASDF_SOURCES will hide python version only if the value of this parameter doesn't
-  # contain "local".
-
-  # Hide tool versions that don't come from one of these sources.
-  #
-  # Available sources:
-  #
-  # - shell   `asdf current` says "set by ASDF_${TOOL}_VERSION environment variable"
-  # - local   `asdf current` says "set by /some/not/home/directory/file"
-  # - global  `asdf current` says "set by /home/username/file"
-  #
-  # Note: If this parameter is set to (shell local global), it won't hide tools.
-  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SOURCES.
-  typeset -g POWERLEVEL9K_ASDF_SOURCES=(shell local global)
-
-  # If set to false, hide tool versions that are the same as global.
-  #
-  # Note: The name of this parameter doesn't reflect its meaning at all.
-  # Note: If this parameter is set to true, it won't hide tools.
-  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_PROMPT_ALWAYS_SHOW.
-  typeset -g POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW=false
-
-  # If set to false, hide tool versions that are equal to "system".
-  #
-  # Note: If this parameter is set to true, it won't hide tools.
-  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_SYSTEM.
-  typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true
-
-  # If set to non-empty value, hide tools unless there is a file matching the specified file pattern
-  # in the current directory, or its parent diretory, or its grandparent directory, and so on.
-  #
-  # Note: If this parameter is set to empty value, it won't hide tools.
-  # Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments.
-  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_ON_UPGLOB.
-  #
-  # Example: Hide nodejs version when there is no package.json and no *.js files in the current
-  # directory, in `..`, in `../..` and so on.
-  #
-  #   typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.js|package.json'
-  typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB=
-
-  # Ruby version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_RUBY_FOREGROUND=168
-  # typeset -g POWERLEVEL9K_ASDF_RUBY_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_RUBY_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Python version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_PYTHON_FOREGROUND=37
-  # typeset -g POWERLEVEL9K_ASDF_PYTHON_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_PYTHON_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Go version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_GOLANG_FOREGROUND=37
-  # typeset -g POWERLEVEL9K_ASDF_GOLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_GOLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Node.js version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_NODEJS_FOREGROUND=70
-  # typeset -g POWERLEVEL9K_ASDF_NODEJS_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Rust version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_RUST_FOREGROUND=37
-  # typeset -g POWERLEVEL9K_ASDF_RUST_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_RUST_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # .NET Core version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_FOREGROUND=134
-  # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_DOTNET_CORE_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Flutter version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_FLUTTER_FOREGROUND=38
-  # typeset -g POWERLEVEL9K_ASDF_FLUTTER_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_FLUTTER_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Lua version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_LUA_FOREGROUND=32
-  # typeset -g POWERLEVEL9K_ASDF_LUA_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_LUA_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Java version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_JAVA_FOREGROUND=32
-  # typeset -g POWERLEVEL9K_ASDF_JAVA_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_JAVA_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Perl version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_PERL_FOREGROUND=67
-  # typeset -g POWERLEVEL9K_ASDF_PERL_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_PERL_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Erlang version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_ERLANG_FOREGROUND=125
-  # typeset -g POWERLEVEL9K_ASDF_ERLANG_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_ERLANG_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Elixir version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_ELIXIR_FOREGROUND=129
-  # typeset -g POWERLEVEL9K_ASDF_ELIXIR_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_ELIXIR_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Postgres version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_POSTGRES_FOREGROUND=31
-  # typeset -g POWERLEVEL9K_ASDF_POSTGRES_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_POSTGRES_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # PHP version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_PHP_FOREGROUND=99
-  # typeset -g POWERLEVEL9K_ASDF_PHP_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_PHP_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  # Haskell version from asdf.
-  typeset -g POWERLEVEL9K_ASDF_HASKELL_FOREGROUND=172
-  # typeset -g POWERLEVEL9K_ASDF_HASKELL_VISUAL_IDENTIFIER_EXPANSION='⭐'
-  # typeset -g POWERLEVEL9K_ASDF_HASKELL_SHOW_ON_UPGLOB='*.foo|*.bar'
-
-  ###########[ nix_shell ]###########
-  #  # Nix shell color.
-  typeset -g POWERLEVEL9K_NIX_SHELL_FOREGROUND=74
-
-  # Tip: If you want to see just the icon without "pure" and "impure", uncomment the next line.
-  typeset -g POWERLEVEL9K_NIX_SHELL_CONTENT_EXPANSION=''
-
-  # Custom icon.
-  typeset -g POWERLEVEL9K_NIX_SHELL_VISUAL_IDENTIFIER_EXPANSION='nix'
-
-  ###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]###########
-  # Text and color for normal (a.k.a. command) vi mode.
-  typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=CMD
-  typeset -g POWERLEVEL9K_VI_MODE_NORMAL_FOREGROUND=4
-  # Text and color for visual vi mode.
-  typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VIS
-  typeset -g POWERLEVEL9K_VI_MODE_VISUAL_FOREGROUND=3
-  # Text and color for overtype (a.k.a. overwrite and replace) vi mode.
-  typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVR
-  typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_FOREGROUND=2
-  # Text and color for insert vi mode.
-  typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=
-  typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=7
-
-  ##################################[ context: user@hostname ]##################################
-  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=17
-  # Context color in SSH without privileges.
-  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=7
-  # Default context color (no privileges, no SSH).
-  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=7
-
-  # Context format when running with privileges: bold user@hostname.
-  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m'
-  # Context format when in SSH without privileges: user@hostname.
-  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m'
-  # Default context format (no privileges, no SSH): user@hostname.
-  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'
-
-  ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
-  # Python virtual environment color.
-  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=37
-  # Don't show Python version next to the virtual environment name.
-  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
-  # Separate environment name from Python version only with a space.
-  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #####################[ anaconda: conda environment (https://conda.io/) ]######################
-  # Anaconda environment color.
-  typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=37
-  # Don't show Python version next to the anaconda environment name.
-  typeset -g POWERLEVEL9K_ANACONDA_SHOW_PYTHON_VERSION=false
-  # Separate environment name from Python version only with a space.
-  typeset -g POWERLEVEL9K_ANACONDA_{LEFT,RIGHT}_DELIMITER=
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################
-  # Pyenv color.
-  typeset -g POWERLEVEL9K_PYENV_FOREGROUND=37
-  # Hide python version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global)
-  # If set to false, hide python version if it's the same as global:
-  # $(pyenv version-name) == $(pyenv global).
-  typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide python version if it's equal to "system".
-  typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ################[ goenv: go environment (https://github.com/syndbg/goenv) ]################
-  # Goenv color.
-  typeset -g POWERLEVEL9K_GOENV_FOREGROUND=37
-  # Hide go version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global)
-  # If set to false, hide go version if it's the same as global:
-  # $(goenv version-name) == $(goenv global).
-  typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide go version if it's equal to "system".
-  typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]##########
-  # Nodenv color.
-  typeset -g POWERLEVEL9K_NODENV_FOREGROUND=70
-  # Hide node version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global)
-  # If set to false, hide node version if it's the same as global:
-  # $(nodenv version-name) == $(nodenv global).
-  typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide node version if it's equal to "system".
-  typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]###############
-  # Nvm color.
-  typeset -g POWERLEVEL9K_NVM_FOREGROUND=70
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############
-  # Nodeenv color.
-  typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=70
-  # Don't show Node version next to the environment name.
-  typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false
-  # Separate environment name from Node version only with a space.
-  typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER=
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##############################[ node_version: node.js version ]###############################
-  # Node version color.
-  typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=70
-  # Show node version only when in a directory tree containing package.json.
-  typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #######################[ go_version: go version (https://golang.org) ]########################
-  # Go version color.
-  typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=37
-  # Show go version only when in a go project subdirectory.
-  typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #################[ rust_version: rustc version (https://www.rust-lang.org) ]##################
-  # Rust version color.
-  typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=37
-  # Show rust version only when in a rust project subdirectory.
-  typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
-  # .NET version color.
-  typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=134
-  # Show .NET version only when in a .NET project subdirectory.
-  typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #####################[ php_version: php version (https://www.php.net/) ]######################
-  # PHP version color.
-  typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=99
-  # Show PHP version only when in a PHP project subdirectory.
-  typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_PHP_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##########[ laravel_version: laravel php framework version (https://laravel.com/) ]###########
-  # Laravel version color.
-  typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=161
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ####################[ java_version: java version (https://www.java.com/) ]####################
-  # Java version color.
-  typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=32
-  # Show java version only when in a java project subdirectory.
-  typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true
-  # Show brief version.
-  typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]####
-  # Package color.
-  typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=117
-  # Package format. The following parameters are available within the expansion.
-  #
-  # - P9K_PACKAGE_NAME     The value of `name` field in package.json.
-  # - P9K_PACKAGE_VERSION  The value of `version` field in package.json.
-  #
-  # typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}'
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
-  # Rbenv color.
-  typeset -g POWERLEVEL9K_RBENV_FOREGROUND=168
-  # Hide ruby version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global)
-  # If set to false, hide ruby version if it's the same as global:
-  # $(rbenv version-name) == $(rbenv global).
-  typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide ruby version if it's equal to "system".
-  typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  #######################[ rvm: ruby version from rvm (https://rvm.io) ]########################
-  # Rvm color.
-  typeset -g POWERLEVEL9K_RVM_FOREGROUND=168
-  # Don't show @gemset at the end.
-  typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false
-  # Don't show ruby- at the front.
-  typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############
-  # Fvm color.
-  typeset -g POWERLEVEL9K_FVM_FOREGROUND=38
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]###########
-  # Lua color.
-  typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=32
-  # Hide lua version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global)
-  # If set to false, hide lua version if it's the same as global:
-  # $(luaenv version-name) == $(luaenv global).
-  typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide lua version if it's equal to "system".
-  typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################
-  # Java color.
-  typeset -g POWERLEVEL9K_JENV_FOREGROUND=32
-  # Hide java version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global)
-  # If set to false, hide java version if it's the same as global:
-  # $(jenv version-name) == $(jenv global).
-  typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide java version if it's equal to "system".
-  typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############
-  # Perl color.
-  typeset -g POWERLEVEL9K_PLENV_FOREGROUND=67
-  # Hide perl version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global)
-  # If set to false, hide perl version if it's the same as global:
-  # $(plenv version-name) == $(plenv global).
-  typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide perl version if it's equal to "system".
-  typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############
-  # PHP color.
-  typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=99
-  # Hide php version if it doesn't come from one of these sources.
-  typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global)
-  # If set to false, hide php version if it's the same as global:
-  # $(phpenv version-name) == $(phpenv global).
-  typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false
-  # If set to false, hide php version if it's equal to "system".
-  typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  ##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]###########
-  # Haskell color.
-  typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=172
-  # Hide haskell version if it doesn't come from one of these sources.
-  #
-  #   shell:  version is set by STACK_YAML
-  #   local:  version is set by stack.yaml up the directory tree
-  #   global: version is set by the implicit global project (~/.stack/global-project/stack.yaml)
-  typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local)
-  # If set to false, hide haskell version if it's the same as in the implicit global project.
-  typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true
-  # Custom icon.
-  # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐'
-
-  # Example of a user-defined prompt segment. Function prompt_example will be called on every
-  # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
-  # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and orange text greeting the user.
-  #
-  # Type `p10k help segment` for documentation and a more sophisticated example.
-  function prompt_watson() {
-    local watson_status=$(watson status)
-    local noproject="No project started."
-    if [ "$watson_status" != "$noproject" ]; then
-      p10k segment -i "祥" -f yellow -t "$(echo $watson_status | awk '{print $2,$3}')"
-    else
-      p10k segment -i "⏾" -f red -t ""
-    fi
-  }
-
-  function prompt_triton() {
-    local triton_profile=$(echo $TRITON_PROFILE)
-    if [ "$triton_profile" != "" ]; then
-      p10k segment -f yellow -t "$(echo "✚" "$triton_profile")"
-    fi
-  }
-
-  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
-  # when accepting a command line. Supported values:
-  #
-  #   - off:      Don't change prompt when accepting a command line.
-  #   - always:   Trim down prompt when accepting a command line.
-  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
-  #               typed after changing current working directory.
-  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always
-
-  # Instant prompt mode.
-  #
-  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
-  #              it incompatible with your zsh configuration files.
-  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
-  #              during zsh initialization. Choose this if you've read and understood
-  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
-  #   - verbose: Enable instant prompt and print a warning when detecting console output during
-  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
-  #              seen the warning, or if you are unsure what this all means.
-  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
-
-  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
-  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
-  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
-  # really need it.
-  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=false
-
-  # If p10k is already loaded, reload configuration.
-  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
-  (( ! $+functions[p10k] )) || p10k reload
-}
-
-# Tell `p10k configure` which file it should overwrite.
-typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}
-
-(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
-'builtin' 'unset' 'p10k_config_opts'

modules/virtualisation/default.nix

@@ -39,7 +39,7 @@ in {
       libvirt-glib
       qemu
       virt-manager
-      python38Packages.libvirt
+      python3Packages.libvirt
       gvfs
       edk2
       OVMF

overlays/blesh.nix

@@ -0,0 +1,32 @@
+final: prev: {
+  blesh = prev.blesh.overrideAttrs (oldAttrs: rec {
+    inherit (prev.sources.blesh-nvfetcher) version src;
+
+    dontBuild = false;
+    buildInputs = [prev.git];
+    patchPhase = ''
+      substituteInPlace GNUmakefile \
+        --replace "git submodule update --init --recursive" ""
+    '';
+    nativeCheckInputs = oldAttrs.nativeCheckInputs ++ [prev.busybox];
+
+    installPhase = ''
+      runHook preInstall
+
+      mkdir -p "$out/share/blesh/lib"
+
+      cat <<EOF >"$out/share/blesh/lib/_package.sh"
+      _ble_base_package_type=nix
+
+      function ble/base/package:nix/update {
+        echo "Ble.sh is installed by Nix. You can update it there." >&2
+        return 1
+      }
+      EOF
+
+      make install INSDIR=$out/share/blesh
+
+      runHook postInstall
+    '';
+  });
+}

overlays/overrides.nix

@@ -3,20 +3,13 @@ channels: final: prev: {
 
   inherit
     (channels.latest)
-    cachix
-    dhall
-    discord
-    element-desktop
-    rage
-    nix-index
-    qutebrowser
-    alejandra
-    signal-desktop
-    starship
-    deploy-rs
-    tdesktop
-    arduino
-    arduino-cli
+    nixd
+    docker_24
+    ;
+
+  inherit
+    (channels.fork)
+    nvfetcher
     ;
 
   haskellPackages =
@@ -32,4 +25,6 @@ channels: final: prev: {
           ;
       });
     });
+
+  vimPlugins = prev.vimPlugins // {inherit (channels.latest.vimPlugins) nvim-lspconfig;};
 }

overlays/waybar.nix

@@ -1,5 +0,0 @@
-channels: final: prev: {
-  waybar = channels.latest.waybar.overrideAttrs (oldAttrs: rec {
-    inherit (prev.sources.waybar-nvfetcher) version src;
-  });
-}

pkgs/_sources/generated.nix

@@ -1,19 +1,19 @@
 # This file was generated by nvfetcher, please do not modify it manually.
+{ fetchgit, fetchurl, fetchFromGitHub, dockerTools }:
 {
-  fetchgit,
-  fetchurl,
-  fetchFromGitHub,
-}: {
-  F-Sy-H = {
-    pname = "F-Sy-H";
-    version = "899f68b52b6b86a36cd8178eb0e9782d4aeda714";
+  blesh-nvfetcher = {
+    pname = "blesh-nvfetcher";
+    version = "9d84b424daf31b192891c06275fff316fa5ddd35";
     src = fetchFromGitHub {
-      owner = "z-shell";
-      repo = "F-Sy-H";
-      rev = "899f68b52b6b86a36cd8178eb0e9782d4aeda714";
-      fetchSubmodules = false;
-      sha256 = "sha256-zhaXjrNL0amxexbZm4Kr5Y/feq1+2zW0O6eo9iZhmi0=";
+      owner = "akinomyoga";
+      repo = "ble.sh";
+      rev = "9d84b424daf31b192891c06275fff316fa5ddd35";
+      fetchSubmodules = true;
+      deepClone = false;
+      leaveDotGit = true;
+      sha256 = "sha256-7aX5UtDB9pUHHeOi9n+qWsM2KGenHVL6O18vG9W8tmQ=";
     };
+    date = "2023-10-02";
   };
   instant-nvim-nvfetcher = {
     pname = "instant-nvim-nvfetcher";
@@ -25,6 +25,7 @@
       fetchSubmodules = false;
       sha256 = "sha256-DXJWji/NR8ZCxe014rD51v3EHJHMhRQeOoI3SsY8mR4=";
     };
+    date = "2022-06-25";
   };
   manix = {
     pname = "manix";
@@ -36,28 +37,7 @@
       fetchSubmodules = false;
       sha256 = "sha256-GqPuYscLhkR5E2HnSFV4R48hCWvtM3C++3zlJhiK/aw=";
     };
-  };
-  ohmyzsh = {
-    pname = "ohmyzsh";
-    version = "b602e0a066d8c98e8c02201ad16c764447fd8531";
-    src = fetchFromGitHub {
-      owner = "ohmyzsh";
-      repo = "ohmyzsh";
-      rev = "b602e0a066d8c98e8c02201ad16c764447fd8531";
-      fetchSubmodules = false;
-      sha256 = "sha256-O4thanOQpX/DHPdfW2p/RUXzIPj6GUp9EnKJfkh7yQM=";
-    };
-  };
-  powerlevel10k = {
-    pname = "powerlevel10k";
-    version = "a30145b0f82d06770e924e9eac064ed223a94e6b";
-    src = fetchFromGitHub {
-      owner = "romkatv";
-      repo = "powerlevel10k";
-      rev = "a30145b0f82d06770e924e9eac064ed223a94e6b";
-      fetchSubmodules = false;
-      sha256 = "sha256-jnZXLrywUrJgTX1tFpoNH94r/jcGl2P6R7DoedluHxQ=";
-    };
+    date = "2021-04-20";
   };
   rnix-lsp-nvfetcher = {
     pname = "rnix-lsp-nvfetcher";
@@ -69,6 +49,7 @@
       fetchSubmodules = false;
       sha256 = "sha256-F0s0m62S5bHNVWNHLZD6SeHiLrsDx98VQbRjDyIu+qQ=";
     };
+    date = "2022-11-27";
   };
   vim-apprentice-nvfetcher = {
     pname = "vim-apprentice-nvfetcher";
@@ -80,6 +61,7 @@
       fetchSubmodules = false;
       sha256 = "sha256-03B9tmU9+6t2hxhOgZxBqJr9r41CAqhHLUkHYvFdcks=";
     };
+    date = "2023-02-15";
   };
   vim-beautify-nvfetcher = {
     pname = "vim-beautify-nvfetcher";
@@ -91,6 +73,7 @@
       fetchSubmodules = false;
       sha256 = "sha256-QPTCl6KaGcAjTS5yVDov9yxmv0fDaFoPLMsrtVIG6GQ=";
     };
+    date = "2018-12-27";
   };
   vim-caddyfile-nvfetcher = {
     pname = "vim-caddyfile-nvfetcher";
@@ -102,17 +85,19 @@
       fetchSubmodules = false;
       sha256 = "sha256-rRYv3vnt31g7hNTxttTD6BWdv5JJ+ko3rPNyDUEOZ9o=";
     };
+    date = "2022-05-09";
   };
   vim-workspace-nvfetcher = {
     pname = "vim-workspace-nvfetcher";
-    version = "c26b473f9b073f24bacecd38477f44c5cd1f5a62";
+    version = "c0d1e4332a378f58bfdf363b4957168fa78e79b4";
     src = fetchFromGitHub {
       owner = "thaerkh";
       repo = "vim-workspace";
-      rev = "c26b473f9b073f24bacecd38477f44c5cd1f5a62";
+      rev = "c0d1e4332a378f58bfdf363b4957168fa78e79b4";
       fetchSubmodules = false;
-      sha256 = "sha256-XV7opLyfkHIDO0+JJaO/x0za0gsHuklrzapTGdLHJmI=";
+      sha256 = "sha256-2Brx098dk5THiieBiW71FG9mUUwS1CSY9mpOPWA/Tq4=";
     };
+    date = "2023-05-28";
   };
   vimagit-nvfetcher = {
     pname = "vimagit-nvfetcher";
@@ -124,27 +109,6 @@
       fetchSubmodules = false;
       sha256 = "sha256-fhazQQqyFaO0fdoeNI9nBshwTDhKNHH262H/QThtuO0=";
     };
-  };
-  waybar-nvfetcher = {
-    pname = "waybar-nvfetcher";
-    version = "09142fa322e080474de0f2dc3ea98036846550df";
-    src = fetchFromGitHub {
-      owner = "Alexays";
-      repo = "Waybar";
-      rev = "09142fa322e080474de0f2dc3ea98036846550df";
-      fetchSubmodules = false;
-      sha256 = "sha256-5KqQaaKwW14F/rVWGQ0qBUU0b3Z+v/Mq8lnSwqLtT7U=";
-    };
-  };
-  zsh-nix-shell = {
-    pname = "zsh-nix-shell";
-    version = "af6f8a266ea1875b9a3e86e14796cadbe1cfbf08";
-    src = fetchFromGitHub {
-      owner = "chisui";
-      repo = "zsh-nix-shell";
-      rev = "af6f8a266ea1875b9a3e86e14796cadbe1cfbf08";
-      fetchSubmodules = false;
-      sha256 = "sha256-BjgMhILEL/qdgfno4LR64LSB8n9pC9R+gG7IQWwgyfQ=";
-    };
+    date = "2022-07-03";
   };
 }

pkgs/lgcl.nix

@@ -1,4 +1,5 @@
-self: with self; let
+self:
+with self; let
   looking-glass-client = self.looking-glass-client.overrideAttrs (old: {
     meta.platforms = ["x86_64-linux" "aarch64-linux"];
   });

pkgs/mopidy-jellyfin.nix

@@ -1,19 +1,20 @@
-self: with self; let
-  websocket-client = python39.pkgs.buildPythonPackage rec {
+self:
+with self; let
+  websocket-client = python3.pkgs.buildPythonPackage rec {
     pname = "websocket-client";
     version = "1.2.1";
     doCheck = false;
-    src = python39.pkgs.fetchPypi {
+    src = python3.pkgs.fetchPypi {
       inherit pname version;
       sha256 = "sha256-jftxXYqZL1cS//jIQ62ulOIrIqmbLF5rDsShqYHMTg0=";
     };
   };
 in
-  python39.pkgs.buildPythonPackage rec {
+  python3.pkgs.buildPythonPackage rec {
     pname = "Mopidy-Jellyfin";
     version = "1.0.2";
     doCheck = false;
-    propagatedBuildInputs = with python39.pkgs; [
+    propagatedBuildInputs = with python3.pkgs; [
       unidecode
       websocket-client
       requests
@@ -21,7 +22,7 @@ in
       pykka
       mopidy
     ];
-    src = python39.pkgs.fetchPypi {
+    src = python3.pkgs.fetchPypi {
       inherit pname version;
       sha256 = "sha256-5XimIIQSpvNyQbSOFtSTkA0jhA0V68BbyQEQNnov+0g=";
     };

pkgs/sources.toml

@@ -3,22 +3,6 @@
 src.git = "https://github.com/mlvzk/manix"
 fetch.github = "mlvzk/manix"
 
-[ohmyzsh]
-src.git = "https://github.com/ohmyzsh/ohmyzsh"
-fetch.github = "ohmyzsh/ohmyzsh"
-
-[powerlevel10k]
-src.git = "https://github.com/romkatv/powerlevel10k"
-fetch.github = "romkatv/powerlevel10k"
-
-[F-Sy-H]
-src.git = "https://github.com/z-shell/F-Sy-H"
-fetch.github = "z-shell/F-Sy-H"
-
-[zsh-nix-shell]
-src.git = "https://github.com/chisui/zsh-nix-shell"
-fetch.github = "chisui/zsh-nix-shell"
-
 [rnix-lsp-nvfetcher]
 src.git = "https://github.com/nix-community/rnix-lsp"
 fetch.github = "nix-community/rnix-lsp"
@@ -47,6 +31,8 @@ fetch.github = "zeekay/vim-beautify"
 src.git = "https://github.com/romainl/Apprentice"
 fetch.github = "romainl/Apprentice"
 
-[waybar-nvfetcher]
-src.git = "https://github.com/Alexays/Waybar"
-fetch.github = "Alexays/Waybar"
+[blesh-nvfetcher]
+src.git = "https://github.com/akinomyoga/ble.sh"
+fetch.github = "akinomyoga/ble.sh"
+git.fetchSubmodules = true
+git.leaveDotGit = true

pkgs/sway-launcher.nix

@@ -1,6 +1,6 @@
 self:
 with self; ''
-  #!/usr/bin/env zsh
+  #!/usr/bin/env bash
   # terminal application launcher for sway, using fzf
   # original command:
   # Based on: https://github.com/swaywm/sway/issues/1367
@@ -12,7 +12,7 @@ with self; ''
 
   # Get shell command list
   # This may include the occasional non-executable file
-  command_list=$({ whence -wm '*' | sed 's/:[^:]*$//' })
+  command_list=$({ compgen -c | sed 's/:[^:]*$//'; })
 
   # read existing command history
   if [ -f "$HIST_FILE" ]; then

pkgs/uhk-agent.nix

@@ -1,4 +1,5 @@
-self: with self; let
+self:
+with self; let
   uhk-agent-bin = stdenv.mkDerivation rec {
     pname = "uhk-agent-bin";
     version = "1.5.14";

profiles/base-user/.config/git/gitmessage.nix

@@ -6,19 +6,27 @@
   user = config.pub-solar.user;
   xdg = config.home-manager.users."${user.name}".xdg;
 in ''
-  # Title: Summary, imperative, start upper case, don't end with a period
-  # No more than 50 chars. #### 50 chars is here:  #
-  #
+# What happened?
+#
+# fix feat build chore ci docs style refactor perf test
+#
+# type!(optional scope): <summary> --------------#
+#
 
 
-  # ^ Remember ending with an extra blank line
-  # Body: Explain *what* and *why* (not *how*). Include issue number.
-  # Wrap at 72 chars. ################################## which is here:  #
-  #
+# ^\n
+# What exactly was done and why? --------------------------------------#
+#
 
 
-  # ^ Remember ending with an extra blank line
-  # At the end: Include Co-authored-by for all contributors.
-  #
-  # Co-authored-by: Example Name <email@example.com>
+# ^\n
+#
+# Any issue numbers or links?
+#
+# Ref: #123
+
+
+# ^\n
+#
+# Co-authored-by: Example Name <email@example.com>
 ''

profiles/base-user/.config/vifm/colors/base16.vifm

@@ -1,26 +0,0 @@
-" Reset all styles first
-highlight clear
-
-highlight Border	cterm=none	ctermfg=235	ctermbg=0
-
-highlight TopLine	cterm=none	ctermfg=20	ctermbg=18
-highlight TopLineSel	cterm=none	ctermfg=1	ctermbg=18
-
-highlight Win		cterm=none	ctermfg=188	ctermbg=0
-highlight Directory	cterm=bold	ctermfg=4	ctermbg=0
-highlight CurrLine	cterm=none	ctermfg=3	ctermbg=19
-highlight OtherLine	cterm=none	ctermfg=3	ctermbg=19
-highlight Selected	cterm=none	ctermfg=5	ctermbg=19
-
-highlight JobLine	cterm=bold	ctermfg=0	ctermbg=18
-highlight StatusLine	cterm=bold	ctermfg=0	ctermbg=18
-highlight ErrorMsg	cterm=bold	ctermfg=0	ctermbg=18
-highlight WildMenu	cterm=bold	ctermfg=0	ctermbg=18
-highlight CmdLine	cterm=none	ctermfg=20	ctermbg=0
-
-highlight Executable	cterm=bold	ctermfg=2	ctermbg=0
-highlight Link		cterm=none	ctermfg=9	ctermbg=0
-highlight BrokenLink	cterm=none	ctermfg=1	ctermbg=0
-highlight Device	cterm=none	ctermfg=228	ctermbg=0
-highlight Fifo		cterm=none	ctermfg=109	ctermbg=0
-highlight Socket	cterm=none	ctermfg=110	ctermbg=0

profiles/base-user/.config/vifm/vifmrc

@@ -1,495 +0,0 @@
-" vim: filetype=vifm :
-" Sample configuration file for vifm (last updated: 2 June, 2019)
-" You can edit this file by hand.
-" The " character at the beginning of a line comments out the line.
-" Blank lines are ignored.
-" The basic format for each item is shown with an example.
-
-" ------------------------------------------------------------------------------
-
-" Command used to edit files in various contexts.  The default is vim.
-" If you would like to use another vi clone such as Elvis or Vile
-" you will need to change this setting.
-
-set vicmd=nvim
-" set vicmd=elvis\ -G\ termcap
-" set vicmd=vile
-
-" This makes vifm perform file operations on its own instead of relying on
-" standard utilities like `cp`.  While using `cp` and alike is a more universal
-" solution, it's also much slower when processing large amounts of files and
-" doesn't support progress measuring.
-
-set syscalls
-
-" Trash Directory
-" The default is to move files that are deleted with dd or :d to
-" the trash directory.  If you change this you will not be able to move
-" files by deleting them and then using p to put the file in the new location.
-" I recommend not changing this until you are familiar with vifm.
-" This probably shouldn't be an option.
-
-set trash
-
-" This is how many directories to store in the directory history.
-
-set history=100
-
-" Automatically resolve symbolic links on l or Enter.
-
-set nofollowlinks
-
-" With this option turned on you can run partially entered commands with
-" unambiguous beginning using :! (e.g. :!Te instead of :!Terminal or :!Te<tab>).
-
-" set fastrun
-
-" Natural sort of (version) numbers within text.
-
-set sortnumbers
-
-" Maximum number of changes that can be undone.
-
-set undolevels=100
-
-" Use Vim's format of help file (has highlighting and "hyperlinks").
-" If you would rather use a plain text help file set novimhelp.
-
-set vimhelp
-
-" If you would like to run an executable file when you
-" press return on the file name set this.
-
-set norunexec
-
-" Selected color scheme
-
-colorscheme base16
-
-" Format for displaying time in file list. For example:
-" TIME_STAMP_FORMAT=%m/%d-%H:%M
-" See man date or man strftime for details.
-
-set timefmt=%m/%d\ %H:%M
-
-" Show list of matches on tab completion in command-line mode
-
-set wildmenu
-
-" Display completions in a form of popup with descriptions of the matches
-
-set wildstyle=popup
-
-" Display suggestions in normal, visual and view modes for keys, marks and
-" registers (at most 5 files).  In other view, when available.
-
-set suggestoptions=normal,visual,view,otherpane,keys,marks,registers
-
-" Ignore case in search patterns unless it contains at least one uppercase
-" letter
-
-set ignorecase
-set smartcase
-
-" Don't highlight search results automatically
-
-set nohlsearch
-
-" Use increment searching (search while typing)
-set incsearch
-
-" Try to leave some space from cursor to upper/lower border in lists
-
-set scrolloff=4
-
-" Don't do too many requests to slow file systems
-
-if !has('win')
-    set slowfs=curlftpfs
-endif
-
-" Set custom status line look
-
-set statusline="  Hint: %z%= %A %10u:%-7g %15s %20d  "
-
-" ------------------------------------------------------------------------------
-
-" :mark mark /full/directory/path [filename]
-
-mark b ~/bin/
-mark h ~/
-
-" ------------------------------------------------------------------------------
-
-" :com[mand][!] command_name action
-" The following macros can be used in a command
-" %a is replaced with the user arguments.
-" %c the current file under the cursor.
-" %C the current file under the cursor in the other directory.
-" %f the current selected file, or files.
-" %F the current selected file, or files in the other directory.
-" %b same as %f %F.
-" %d the current directory name.
-" %D the other window directory name.
-" %m run the command in a menu window
-
-command! df df -h %m 2> /dev/null
-command! diff vim -d %f %F
-command! zip zip -r %f.zip %f
-command! unzip unzip %c %c.extracted
-command! run !! ./%f
-command! make !!make %a
-command! mkcd :mkdir %a | cd %a
-command! vgrep vim "+grep %a"
-command! reload :write | restart
-
-" ------------------------------------------------------------------------------
-
-" The file type is for the default programs to be used with
-" a file extension.
-" :filetype pattern1,pattern2 defaultprogram,program2
-" :fileviewer pattern1,pattern2 consoleviewer
-" The other programs for the file type can be accessed with the :file command
-" The command macros %f, %F, %d, %F may be used in the commands.
-" The %a macro is ignored.  To use a % you must put %%.
-
-" For automated FUSE mounts, you must register an extension with :file[x]type
-" in one of following formats:
-"
-" :filetype extensions FUSE_MOUNT|some_mount_command using %SOURCE_FILE and %DESTINATION_DIR variables
-" %SOURCE_FILE and %DESTINATION_DIR are filled in by vifm at runtime.
-" A sample line might look like this:
-" :filetype *.zip,*.jar,*.war,*.ear FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR
-"
-" :filetype extensions FUSE_MOUNT2|some_mount_command using %PARAM and %DESTINATION_DIR variables
-" %PARAM and %DESTINATION_DIR are filled in by vifm at runtime.
-" A sample line might look like this:
-" :filetype *.ssh FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR
-" %PARAM value is filled from the first line of file (whole line).
-" Example first line for SshMount filetype: root@127.0.0.1:/
-"
-" You can also add %CLEAR if you want to clear screen before running FUSE
-" program.
-
-" Pdf
-filextype *.pdf epdfview %c %i &, apvlv %c, xpdf %c
-fileviewer *.pdf
-        \ vifmimg pdfpreview %px %py %pw %ph %c
-        \ %pc
-        \ vifmimg clear
-        " \ pdftotext -nopgbrk %c -
-
-" PostScript
-filextype *.ps,*.eps,*.ps.gz
-        \ {View in zathura}
-        \ zathura %f,
-        \ {View in gv}
-        \ gv %c %i &,
-
-" Djvu
-filextype *.djvu
-        \ {View in zathura}
-        \ zathura %f,
-        \ {View in apvlv}
-        \ apvlv %f,
-
-" Audio
-filetype *.wav,*.mp3,*.flac,*.m4a,*.wma,*.ape,*.ac3,*.og[agx],*.spx,*.opus
-        \ {Play using vlc}
-        \ vlc %c,
-        \ {Play using ffplay}
-        \ ffplay -nodisp -autoexit %c,
-fileviewer *.mp3 mp3info
-fileviewer *.flac soxi
-
-" Video
-filextype *.avi,*.mp4,*.wmv,*.dat,*.3gp,*.ogv,*.mkv,*.mpg,*.mpeg,*.vob,
-        \*.fl[icv],*.m2v,*.mov,*.webm,*.ts,*.mts,*.m4v,*.r[am],*.qt,*.divx,
-        \*.as[fx]
-        \ {View using vlc}
-        \ vlc %f,
-        \ {View using ffplay}
-        \ ffplay -fs -autoexit %f,
-fileviewer *.avi,*.mp4,*.wmv,*.dat,*.3gp,*.ogv,*.mkv,*.mpg,*.mpeg,*.vob,
-        \*.fl[icv],*.m2v,*.mov,*.webm,*.ts,*.mts,*.m4v,*.r[am],*.qt,*.divx,
-        \*.as[fx]
-        \ vifmimg videopreview %px %py %pw %ph %c
-        \ %pc
-        \ vifmimg clear
-        " \ ffprobe -pretty %c 2>&1
-
-" Web
-filextype *.html,*.htm
-        \ {Open with vim}
-        \ nvim %f,
-        \ {Open with firefox}
-        \ firefox %f &,
-filetype *.html,*.htm links, lynx
-
-" Object
-filetype *.o nm %f | less
-
-" Man page
-filetype *.[1-8] man ./%c
-fileviewer *.[1-8] man ./%c | col -b
-
-" Images
-filextype *.bmp,*.jpg,*.jpeg,*.png,*.gif,*.xpm
-        \ {View in viewnior}
-        \ viewnior %f,
-fileviewer *.bmp,*.jpg,*.jpeg,*.png,*.xpm
-        \ vifmimg draw %px %py %pw %ph %c
-        \ %pc
-        \ vifmimg clear
-        " Get w3m image previews inside vifm
-        " \ imgt %px %py %pw %ph %c
-        " \ %pc
-        " \ imgc %px %py %pw %ph   NOT NEEDED IN XTERM
-fileviewer *.gif
-        \ vifmimg gifpreview %px %py %pw %ph %c
-        \ %pc
-        \ vifmimg clear
-
-" OpenRaster
-filextype *.ora
-        \ {Edit in MyPaint}
-        \ mypaint %f,
-
-" Mindmap
-filextype *.vym
-        \ {Open with VYM}
-        \ vym %f &,
-
-" MD5
-filetype *.md5
-        \ {Check MD5 hash sum}
-        \ md5sum -c %f %S,
-
-" SHA1
-filetype *.sha1
-        \ {Check SHA1 hash sum}
-        \ sha1sum -c %f %S,
-
-" SHA256
-filetype *.sha256
-        \ {Check SHA256 hash sum}
-        \ sha256sum -c %f %S,
-
-" SHA512
-filetype *.sha512
-        \ {Check SHA512 hash sum}
-        \ sha512sum -c %f %S,
-
-" GPG signature
-filetype *.asc
-        \ {Check signature}
-        \ !!gpg --verify %c,
-
-" Torrent
-filetype *.torrent ktorrent %f &
-fileviewer *.torrent dumptorrent -v %c
-
-" FuseZipMount
-filetype *.zip,*.jar,*.war,*.ear,*.oxt,*.apkg
-        \ {Mount with fuse-zip}
-        \ FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR,
-        \ {View contents}
-        \ zip -sf %c | less,
-        \ {Extract here}
-        \ tar -xf %c,
-fileviewer *.zip,*.jar,*.war,*.ear,*.oxt zip -sf %c
-
-" ArchiveMount
-filetype *.tar,*.tar.bz2,*.tbz2,*.tgz,*.tar.gz,*.tar.xz,*.txz
-        \ {Mount with archivemount}
-        \ FUSE_MOUNT|archivemount %SOURCE_FILE %DESTINATION_DIR,
-fileviewer *.tgz,*.tar.gz tar -tzf %c
-fileviewer *.tar.bz2,*.tbz2 tar -tjf %c
-fileviewer *.tar.txz,*.txz xz --list %c
-fileviewer *.tar tar -tf %c
-
-" Rar2FsMount and rar archives
-filetype *.rar
-        \ {Mount with rar2fs}
-        \ FUSE_MOUNT|rar2fs %SOURCE_FILE %DESTINATION_DIR,
-fileviewer *.rar unrar v %c
-
-" IsoMount
-filetype *.iso
-        \ {Mount with fuseiso}
-        \ FUSE_MOUNT|fuseiso %SOURCE_FILE %DESTINATION_DIR,
-
-" SshMount
-filetype *.ssh
-        \ {Mount with sshfs}
-        \ FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR %FOREGROUND,
-
-" FtpMount
-filetype *.ftp
-        \ {Mount with curlftpfs}
-        \ FUSE_MOUNT2|curlftpfs -o ftp_port=-,,disable_eprt %PARAM %DESTINATION_DIR %FOREGROUND,
-
-" Fuse7z and 7z archives
-filetype *.7z
-        \ {Mount with fuse-7z}
-        \ FUSE_MOUNT|fuse-7z %SOURCE_FILE %DESTINATION_DIR,
-fileviewer *.7z 7z l %c
-
-" Office files
-filextype *.odt,*.doc,*.docx,*.xls,*.xlsx,*.odp,*.pptx libreoffice %f &
-fileviewer *.doc catdoc %c
-fileviewer *.docx docx2txt.pl %f -
-
-" TuDu files
-filetype *.tudu tudu -f %c
-
-" Qt projects
-filextype *.pro qtcreator %f &
-
-" All others
-filetype *.ts,*.js,*.css,*.sass,*.scss,*.go,*.rs,*.py,*.html,*.xhtml,*.json,*.jsx,*.tsx,*.vue,*.svelte,*.sql
-        \ {Open in editor}
-        \ nvim %c,
-fileviewer *.ts,*.js,*.css,*.sass,*.scss,*.go,*.rs,*.py,*.html,*.xhtml,*.json,*.jsx,*.tsx,*.vue,*.svelte,*.sql bat %c
-
-" Directories
-filextype */
-        \ {View in thunar}
-        \ Thunar %f &,
-
-" Syntax highlighting in preview
-"
-" Explicitly set highlight type for some extensions
-"
-" 256-color terminal
-" fileviewer *.[ch],*.[ch]pp highlight -O xterm256 -s dante --syntax c %c
-" fileviewer Makefile,Makefile.* highlight -O xterm256 -s dante --syntax make %c
-"
-" 16-color terminal
-" fileviewer *.c,*.h highlight -O ansi -s dante %c
-"
-" Or leave it for automatic detection
-"
-" fileviewer *[^/] pygmentize -O style=monokai -f console256 -g
-
-" Displaying pictures in terminal
-"
-" fileviewer *.jpg,*.png shellpic %c
-
-" Open all other files with default system programs (you can also remove all
-" :file[x]type commands above to ensure they don't interfere with system-wide
-" settings).  By default all unknown files are opened with 'vi[x]cmd'
-" uncommenting one of lines below will result in ignoring 'vi[x]cmd' option
-" for unknown file types.
-" For *nix:
-" filetype * xdg-open
-" For OS X:
-" filetype * open
-" For Windows:
-" filetype * start, explorer
-
-" ------------------------------------------------------------------------------
-
-" What should be saved automatically between vifm sessions.  Drop "savedirs"
-" value if you don't want vifm to remember last visited directories for you.
-set vifminfo=dhistory,savedirs,chistory,state,tui,shistory,
-    \phistory,fhistory,dirstack,registers,bookmarks,bmarks
-
-" ------------------------------------------------------------------------------
-
-" Examples of configuring both panels
-
-" Customize view columns a bit (enable ellipsis for truncated file names)
-"
-" set viewcolumns=-{name}..,6{}.
-
-" Filter-out build and temporary files
-"
-" filter! /^.*\.(lo|o|d|class|py[co])$|.*~$/
-
-" ------------------------------------------------------------------------------
-
-" Sample mappings
-
-" Start shell in current directory
-nnoremap s :shell<cr>
-
-" Display sorting dialog
-nnoremap S :sort<cr>
-
-" Toggle visibility of preview window
-nnoremap w :view<cr>
-vnoremap w :view<cr>gv
-
-" Open file in existing instance of nvim
-nnoremap o :!vim %f<cr>
-" Open file in new instance of vim
-nnoremap O :!vim %f<cr>
-
-" Open file in the background using its default program
-nnoremap gb :file &<cr>l
-
-" Interaction with system clipboard
-if has('win')
-    " Yank current directory path to Windows clipboard with forward slashes
-    nnoremap yp :!echo %"d:gs!\!/! %i | clip<cr>
-    " Yank path to current file to Windows clipboard with forward slashes
-    nnoremap yf :!echo %"c:gs!\!/! %i | clip<cr>
-elseif executable('xclip')
-    " Yank current directory path into the clipboard
-    nnoremap yd :!echo %d | xclip %i<cr>
-    " Yank current file path into the clipboard
-    nnoremap yf :!echo %c:p | xclip %i<cr>
-elseif executable('xsel')
-    " Yank current directory path into primary and selection clipboards
-    nnoremap yd :!echo -n %d | xsel --input --primary %i &&
-                \ echo -n %d | xsel --clipboard --input %i<cr>
-    " Yank current file path into into primary and selection clipboards
-    nnoremap yf :!echo -n %c:p | xsel --input --primary %i &&
-                \ echo -n %c:p | xsel --clipboard --input %i<cr>
-endif
-
-" Mappings for faster renaming
-nnoremap I cw<c-a>
-nnoremap cc cw<c-u>
-nnoremap A cw
-
-" Open console in current directory
-nnoremap ,t :!xterm &<cr>
-
-" Open editor to edit vifmrc and apply settings after returning to vifm
-nnoremap ,c :write | edit $MYVIFMRC | restart<cr>
-" Open gvim to edit vifmrc
-nnoremap ,C :!gvim --remote-tab-silent $MYVIFMRC &<cr>
-
-" Toggle wrap setting on ,w key
-nnoremap ,w :set wrap!<cr>
-
-" Example of standard two-panel file managers mappings
-nnoremap <f3> :!less %f<cr>
-nnoremap <f4> :edit<cr>
-nnoremap <f5> :copy<cr>
-nnoremap <f6> :move<cr>
-nnoremap <f7> :mkdir<space>
-nnoremap <f8> :delete<cr>
-
-" Arrow remapping
-map i <Up>
-map j <Left>
-map k <Down>
-noremap h i
-
-vnoremap K L
-vnoremap I H
-vnoremap H I
-
-nnoremap K L
-nnoremap I H
-nnoremap H I
-
-" Escape overwrite
-cmap jj <Esc>
-
-" fzf
-command! FZFfind :set noquickview | :execute 'goto "'.system('fd --hidden --exclude .git --exclude node_modules | fzf --preview "ls -lhA --group-directories-first --color=always {}" --preview-window wrap 2>/dev/tty ').'"%IU' | redraw
-nnoremap <c-p> :FZFfind<cr>

profiles/base-user/.gitignore

@@ -1,111 +0,0 @@
-*
-
-!*.nix
-!/.gitignore
-
-!/.zshrc
-!/.Xdefaults
-!/.Xresources
-!/.xinitrc
-!/.config
-
-!/assets
-!/assets/wallpaper.jpg
-
-!/.config/dircolors
-
-!/.config/xmodmap
-
-!/.config/environment.d
-!/.config/environment.d/profile.conf
-!/.config/environment.d/drone.conf
-!/.config/environment.d/restic.conf
-
-!/.config/user-dirs.dirs
-!/.config/user-dirs.locale
-
-!/.config/gtk-2.0
-!/.config/gtk-2.0/gtkrc
-
-!/.config/gtk-3.0
-!/.config/gtk-3.0/settings.ini
-
-!/.config/xsettingsd
-!/.config/xsettingsd/xsettingsd.conf
-
-!/.config/mako
-!/.config/mako/config
-
-!/.config/alacritty
-!/.config/alacritty/alacritty.yml
-
-!/.config/git
-!/.config/git/config
-
-!/.config/vifm
-!/.config/vifm/vifmrc
-!/.config/vifm/scripts
-!/.config/vifm/colors
-!/.config/vifm/colors/base16.vifm
-
-!/.config/nvim
-!/.config/nvim/init.vim
-!/.config/nvim/clipboard.vim
-!/.config/nvim/lsp.vim
-!/.config/nvim/quickfixopenall.vim
-!/.config/nvim/ui.vim
-
-!/.config/mimeapps.list
-
-!/.config/libinput-gestures.conf
-
-!/.config/sway
-!/.config/sway/config
-!/.config/sway/config.d
-!/.config/sway/config.d/applications.conf
-!/.config/sway/config.d/autostart.conf
-!/.config/sway/config.d/colorscheme.conf
-!/.config/sway/config.d/custom-keybindings.conf
-!/.config/sway/config.d/gaps.conf
-!/.config/sway/config.d/input-defaults.conf
-!/.config/sway/config.d/systemd.conf
-!/.config/sway/config.d/theme.conf
-!/.config/sway/config.d/biolimo
-!/.config/sway/config.d/biolimo/screens.conf
-!/.config/sway/config.d/biolimo/inputs.conf
-!/.config/sway/config.d/chocolatebar
-!/.config/sway/config.d/chocolatebar/screens.conf
-
-!/.config/waybar
-!/.config/waybar/colorscheme.css
-!/.config/waybar/config
-!/.config/waybar/style.css
-
-!/.config/mutt
-!/.config/mutt/muttrc
-!/.config/mutt/base16.muttrc
-!/.config/mutt/mailcap
-
-!/.config/offlineimap
-!/.config/offlineimap/functions.py
-
-!/.local
-!/.local/bin
-!/.local/bin/install-base
-!/.local/bin/swaylock-bg
-!/.local/bin/sway-launcher
-!/.local/bin/sway-service
-!/.local/bin/toggle-kbd-layout
-!/.local/bin/wcwd
-!/.local/bin/vifmrun
-!/.local/bin/vifmimg
-!/.local/bin/s
-!/.local/bin/windows
-!/.local/bin/import-gtk-settings
-!/.local/bin/mailto-mutt
-!/.local/bin/setup-host-conf
-!/.local/bin/steam-xdg
-
-!/.local/share
-!/.local/share/applications
-!/.local/share/applications/userapp-Firefox.desktop

profiles/base-user/.local/share/scripts/base16.sh

@@ -3,28 +3,28 @@
 # Base16 Shell template by Chris Kempson (http://chriskempson.com)
 # Burn scheme by Benjamin Bädorf
 
-color00="1a/18/1a" # Base 00 - Black
-color01="f8/5e/84" # Base 08 - Red
-color02="9e/cd/6f" # Base 0B - Green
-color03="e5/c4/63" # Base 0A - Yellow
-color04="7a/cc/d7" # Base 0D - Blue
-color05="ab/9d/f2" # Base 0E - Magenta
-color06="ef/90/62" # Base 0C - Cyan
-color07="e3/e1/e4" # Base 05 - White
-color08="94/94/94" # Base 03 - Bright Black
-color09=$color01 # Base 08 - Bright Red
-color10=$color02 # Base 0B - Bright Green
-color11=$color03 # Base 0A - Bright Yellow
-color12=$color04 # Base 0D - Bright Blue
-color13=$color05 # Base 0E - Bright Magenta
-color14=$color06 # Base 0C - Bright Cyan
-color15="ff/5f/5f" # Base 07 - Bright White
-color16="df/59/23" # Base 09
-color17="d7/00/00" # Base 0F
-color18="2d/2a/2e" # Base 01
-color19="30/30/30" # Base 02
-color20="d3/d1/d4" # Base 04
-color21="30/30/30" # Base 06
+color00="1a/18/1a"          # Base 00 - Black
+color01="f8/5e/84"          # Base 08 - Red
+color02="9e/cd/6f"          # Base 0B - Green
+color03="e5/c4/63"          # Base 0A - Yellow
+color04="7a/cc/d7"          # Base 0D - Blue
+color05="ab/9d/f2"          # Base 0E - Magenta
+color06="ef/90/62"          # Base 0C - Cyan
+color07="e3/e1/e4"          # Base 05 - White
+color08="94/94/94"          # Base 03 - Bright Black
+color09=$color01            # Base 08 - Bright Red
+color10=$color02            # Base 0B - Bright Green
+color11=$color03            # Base 0A - Bright Yellow
+color12=$color04            # Base 0D - Bright Blue
+color13=$color05            # Base 0E - Bright Magenta
+color14=$color06            # Base 0C - Bright Cyan
+color15="ff/5f/5f"          # Base 07 - Bright White
+color16="df/59/23"          # Base 09
+color17="d7/00/00"          # Base 0F
+color18="2d/2a/2e"          # Base 01
+color19="30/30/30"          # Base 02
+color20="d3/d1/d4"          # Base 04
+color21="30/30/30"          # Base 06
 color_foreground="e3/e1/e4" # Base 05
 color_background="1a/18/1a" # Base 00
 
@@ -50,16 +50,16 @@ else
 fi
 
 # 16 color space
-put_template 0  $color00
-put_template 1  $color01
-put_template 2  $color02
-put_template 3  $color03
-put_template 4  $color04
-put_template 5  $color05
-put_template 6  $color06
-put_template 7  $color07
-put_template 8  $color08
-put_template 9  $color09
+put_template 0 $color00
+put_template 1 $color01
+put_template 2 $color02
+put_template 3 $color03
+put_template 4 $color04
+put_template 5 $color05
+put_template 6 $color06
+put_template 7 $color07
+put_template 8 $color08
+put_template 9 $color09
 put_template 10 $color10
 put_template 11 $color11
 put_template 12 $color12

profiles/base-user/default.nix

@@ -13,28 +13,25 @@ in {
   users = {
     mutableUsers = false;
 
-    groups."${psCfg.user.name}" = {};
-
     users = with pkgs;
       pkgs.lib.setAttrByPath [psCfg.user.name] {
         # Indicates whether this is an account for a “real” user.
         # This automatically sets group to users, createHome to true,
         # home to /home/username, useDefaultShell to true, and isSystemUser to false.
         isNormalUser = true;
-        group = "${psCfg.user.name}";
         description = psCfg.user.description;
         extraGroups = [
-          "wheel"
           "input"
-          "networkmanager"
           "lp"
+          "networkmanager"
           "scanner"
+          "video"
+          "wheel"
         ];
         initialHashedPassword =
           if psCfg.user.password != null
           then psCfg.user.password
           else "";
-        shell = pkgs.zsh;
         openssh.authorizedKeys.keys =
           if psCfg.user.publicKeys != null
           then psCfg.user.publicKeys

profiles/base-user/home.nix

@@ -26,7 +26,16 @@ in {
     fonts.fontconfig.enable = mkForce true;
 
     programs.dircolors.enable = true;
-    programs.dircolors.enableZshIntegration = true;
+
+    programs.less = {
+      enable = true;
+      keys = ''
+        k forw-line
+        i back-line
+        K forw-scroll
+        I back-scroll
+      '';
+    };
 
     home.file."xinitrc".source = ./.xinitrc;
 
@@ -52,8 +61,6 @@ in {
     xdg.configFile."user-dirs.locale".source = ./.config/user-dirs.locale;
     xdg.configFile."xsettingsd/xsettingsd.conf".source = ./.config/xsettingsd/xsettingsd.conf;
     xdg.configFile."mako/config".source = ./.config/mako/config;
-    xdg.configFile."vifm/vifmrc".source = ./.config/vifm/vifmrc;
-    xdg.configFile."vifm/colors/base16.vifm".source = ./.config/vifm/colors/base16.vifm;
     xdg.configFile."libinput-gestures.conf".source = ./.config/libinput-gestures.conf;
     xdg.configFile."waybar/config".source = ./.config/waybar/config;
     xdg.configFile."waybar/style.css".source = ./.config/waybar/style.css;
@@ -72,6 +79,8 @@ in {
     # docker run -it --name caddy-json-schema registry.greenbaum.cloud/gc/caddy-l4:2.5.2 caddy json-schema -output /srv/caddy_schema.json
     xdg.dataFile."nvim/json-schemas/caddy_schema.json".source = .local/share/nvim/json-schemas/caddy_schema.json;
     xdg.dataFile."nvim/templates/.keep".text = "";
+    xdg.dataFile."scripts/.keep".text = "";
+    xdg.dataFile."scripts/base16.sh".source = .local/share/scripts/base16.sh;
     xdg.dataFile."shell.nix.tmpl" = {
       text = ''
         let

profiles/base-user/session-variables.nix

@@ -85,7 +85,24 @@
     VUEDX_TELEMETRY = "off";
 
     # FZF shell history widget default colors
-    FZF_DEFAULT_OPTS = "--color=bg+:#2d2a2e,bg:#1a181a,spinner:#ef9062,hl:#7accd7 --color=fg:#d3d1d4,header:#7accd7,info:#e5c463,pointer:#ef9062 --color=marker:#ef9062,fg+:#d3d1d4,prompt:#e5c463,hl+:#7accd7";
+    FZF_DEFAULT_OPTS = lib.mkForce "--color=bg+:#2d2a2e,bg:#1a181a,spinner:#ef9062,hl:#7accd7 --color=fg:#d3d1d4,header:#7accd7,info:#e5c463,pointer:#ef9062 --color=marker:#ef9062,fg+:#d3d1d4,prompt:#e5c463,hl+:#7accd7";
+
+    # nnn theme colors
+    NNN_FCOLORS = let
+      BLK = "04";
+      CHR = "04";
+      DIR = "04";
+      EXE = "02";
+      REG = "00";
+      HARDLINK = "01";
+      SYMLINK = "01";
+      MISSING = "01";
+      ORPHAN = "07";
+      FIFO = "05";
+      SOCK = "05";
+      OTHER = "02";
+    in
+      BLK + CHR + DIR + EXE + REG + HARDLINK + SYMLINK + MISSING + ORPHAN + FIFO + SOCK + OTHER;
   };
 
   envListNames = lib.attrsets.mapAttrsToList (name: value: name) variables;

secrets/secrets.nix

@@ -1,21 +1,8 @@
 let
   # set ssh public keys here for your system and user
-  host_001_momo_koeln = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE7XTCHfX6ta8EtkdOcZLnpdhMmXDfTebVMs4NC8JEPj root@nixos";
-  axeman = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMNeQYLFauAbzDyIbKC86NUh9yZfiyBm/BtIdkcpZnSU @axeman";
-  b12f-bbcom = "ssh-rsa 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";
-  teutat3s-dumpyourvms = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHcU6KPy4b1MQXd6EJhcYwbJu7E+0IrBZF/IP6T7gbMf teutat3s@dumpyourvms";
-  hensoko_nitrokey_1 = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAII/58A18EtxnLYHu63c/+AyTSkJQSso/VVdHUFGp1CTk cardno:FFFE34353135";
-  hensoko_harrison = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEbaQdxp7Flz6ttELe63rn+Nt9g43qJOLih6VCMP4gPb hensoko@harrison";
-  hensoko_norman = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAqkqMYgncrnczcW/0PY+Z+FmNXXpgw6D9JWTTwiainy hensoko@hensoko-tp-work";
-  allKeys = [
-    axeman
-    b12f-bbcom
-    hensoko_nitrokey_1
-    hensoko_harrison
-    hensoko_norman
-    host_001_momo_koeln
-    teutat3s-dumpyourvms
-  ];
+  system = "";
+  user = "";
+  allKeys = [system user];
 in {
-  "keycloak-database-password.age".publicKeys = allKeys;
+  "secret.age".publicKeys = allKeys;
 }

shell/devos.nix

@@ -59,6 +59,6 @@ in {
     ]
     ++ lib.optionals (pkgs.stdenv.hostPlatform.isLinux && !pkgs.stdenv.buildPlatform.isDarwin) [
       (devos nixos-generators)
-      (devos deploy-rs)
+      (devos deploy-rs.deploy-rs)
     ];
 }

shell/hooks/pre-commit.sh

@@ -1,28 +1,9 @@
 #!/usr/bin/env bash
 
-if git rev-parse --verify HEAD >/dev/null 2>&1; then
-  against=HEAD
-else
-  # Initial commit: diff against an empty tree object
-  against=$(${git}/bin/git hash-object -t tree /dev/null)
-fi
-
-diff="git diff-index --name-only --cached $against --diff-filter d"
-
-all_files=($($diff))
-
-# Format staged files.
-if ((${#all_files[@]} != 0)); then
-  treefmt "${all_files[@]}" &&
-    git add "${all_files[@]}"
-fi
-
-# check editorconfig
-if ((${#all_files[@]} != 0)); then
-  if ! editorconfig-checker -- "${all_files[@]}"; then
-    printf "%b\n" \
-      "\nCode is not aligned with .editorconfig" \
-      "Review the output and commit your fixes" >&2
-    exit 1
-  fi
+# Check editorconfig
+if ! editorconfig-checker; then
+  printf "%b\n" \
+    "\nCode is not aligned with .editorconfig" \
+    "Review the output and commit your fixes" >&2
+  exit 1
 fi

tests/first-test.nix

@@ -8,7 +8,7 @@
   nodes.test-machine = {suites ? null, ...}: {
     imports = suites.iso;
 
-    home-manager.users.pub-solar.programs.zsh.shellAliases = {
+    home-manager.users.pub-solar.programs.bash.shellAliases = {
       test-x11 = "glinfo | tee /tmp/test-x11.out && touch /tmp/test-x11-exit-ok";
       test-wayland = "wayland-info | tee /tmp/test-wayland.out && touch /tmp/test-wayland-exit-ok";
     };

treefmt.toml

@@ -1,6 +1,7 @@
 [formatter.nix]
 command = "alejandra"
 includes = ["*.nix"]
+excludes = ["pkgs/_sources/generated.nix"]
 
 [formatter.prettier]
 command = "prettier"

users/barkeeper/default.nix

@@ -1,43 +0,0 @@
-{
-  config,
-  hmUsers,
-  pkgs,
-  lib,
-  ...
-}: let
-  psCfg = config.pub-solar;
-in {
-  config = {
-    home-manager.users = {inherit (hmUsers) barkeeper;};
-
-    security.sudo.extraRules = [
-      {
-        users = ["${psCfg.user.name}"];
-        commands = [
-          {
-            command = "ALL";
-            options = ["NOPASSWD"];
-          }
-        ];
-      }
-    ];
-
-    pub-solar = {
-      user = {
-        name = "barkeeper";
-        description = "momo deployment user";
-        fullName = "momo infra barkeeper";
-        email = "admins@momo.koeln";
-        gpgKeyId = "";
-        publicKeys = [
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAII/58A18EtxnLYHu63c/+AyTSkJQSso/VVdHUFGp1CTk cardno:FFFE34353135 @hensoko"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAqkqMYgncrnczcW/0PY+Z+FmNXXpgw6D9JWTTwiainy hensoko@hensoko-tp-work"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEbaQdxp7Flz6ttELe63rn+Nt9g43qJOLih6VCMP4gPb @hensoko"
-          "ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFro/k4Mgqyh8yV/7Zwjc0dv60ZM7bROBU9JNd99P/4co6fxPt1pJiU/pEz2Dax/HODxgcO+jFZfvPEuLMCeAl0= YubiKey #10593996 PIV Slot 9a @teutat3s"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGP5MvCwNRtCcP1pSDrn0XZTNlpOqYnjHDm9/OI4hECW @ci-drone-runner"
-          "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMNeQYLFauAbzDyIbKC86NUh9yZfiyBm/BtIdkcpZnSU @axeman"
-        ];
-      };
-    };
-  };
-}

users/pub-solar/default.nix

@@ -0,0 +1,18 @@
+{hmUsers, ...}: {
+  home-manager.users = {inherit (hmUsers) pub-solar;};
+
+  pub-solar = {
+    # These are your personal settings
+    # The only required settings are `name` and `password`,
+    # for convenience, use publicKeys to add your SSH keys
+    # The rest is used for programs like git
+    user = {
+      name = "pub-solar";
+      # default password = pub-solar
+      password = "$6$Kv0BCLU2Jg7GN8Oa$hc2vERKCbZdczFqyHPfgCaleGP.JuOWyd.bfcIsLDNmExGXI6Rnkze.SWzVzVS311KBznN/P4uUYAUADXkVtr.";
+      fullName = "Pub Solar";
+      email = "iso@pub.solar";
+      publicKeys = [];
+    };
+  };
+}