From 31e5b10ce500f5d62049d556a11a39547bc5b332 Mon Sep 17 00:00:00 2001
From: Frederik Menke
Date: Sat, 6 Jul 2024 14:37:43 +0200
Subject: [PATCH] Use own repo
---
Cargo.lock | 92 +++++++++++------------
Cargo.toml | 2 +-
README.md | 213 +----------------------------------------------------
3 files changed, 49 insertions(+), 258 deletions(-)
diff --git a/Cargo.lock b/Cargo.lock
index 27f3376..6f2993b 100644
--- a/Cargo.lock
+++ b/Cargo.lock
@@ -119,6 +119,52 @@ version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "baf1de4339761588bc0619e3cbc0120ee582ebb74b53b4efbf79117bd2da40fd"
+[[package]]
+name = "co2_sensing"
+version = "0.1.0"
+dependencies = [
+ "byte-slice-cast 1.2.2",
+ "byteorder",
+ "cortex-m",
+ "cortex-m-rt",
+ "critical-section",
+ "cyw43",
+ "cyw43-pio",
+ "defmt",
+ "defmt-rtt",
+ "display-interface",
+ "display-interface-spi",
+ "embassy-embedded-hal",
+ "embassy-executor",
+ "embassy-futures",
+ "embassy-net-wiznet",
+ "embassy-rp",
+ "embassy-sync 0.6.0",
+ "embassy-time",
+ "embassy-usb",
+ "embassy-usb-logger",
+ "embedded-graphics",
+ "embedded-hal 1.0.0",
+ "embedded-hal-async",
+ "embedded-hal-bus",
+ "embedded-io-async",
+ "embedded-sdmmc",
+ "embedded-storage",
+ "fixed",
+ "fixed-macro",
+ "heapless 0.8.0",
+ "log",
+ "panic-probe",
+ "pio",
+ "pio-proc",
+ "portable-atomic",
+ "rand",
+ "smart-leds",
+ "st7789",
+ "static_cell",
+ "usbd-hid",
+]
+
[[package]]
name = "codespan-reporting"
version = "0.11.1"
@@ -485,52 +531,6 @@ dependencies = [
"rp2040-boot2",
]
-[[package]]
-name = "embassy-rp-skeleton"
-version = "0.1.0"
-dependencies = [
- "byte-slice-cast 1.2.2",
- "byteorder",
- "cortex-m",
- "cortex-m-rt",
- "critical-section",
- "cyw43",
- "cyw43-pio",
- "defmt",
- "defmt-rtt",
- "display-interface",
- "display-interface-spi",
- "embassy-embedded-hal",
- "embassy-executor",
- "embassy-futures",
- "embassy-net-wiznet",
- "embassy-rp",
- "embassy-sync 0.6.0",
- "embassy-time",
- "embassy-usb",
- "embassy-usb-logger",
- "embedded-graphics",
- "embedded-hal 1.0.0",
- "embedded-hal-async",
- "embedded-hal-bus",
- "embedded-io-async",
- "embedded-sdmmc",
- "embedded-storage",
- "fixed",
- "fixed-macro",
- "heapless 0.8.0",
- "log",
- "panic-probe",
- "pio",
- "pio-proc",
- "portable-atomic",
- "rand",
- "smart-leds",
- "st7789",
- "static_cell",
- "usbd-hid",
-]
-
[[package]]
name = "embassy-sync"
version = "0.3.0"
diff --git a/Cargo.toml b/Cargo.toml
index c83203c..e61a61e 100644
--- a/Cargo.toml
+++ b/Cargo.toml
@@ -1,5 +1,5 @@
[package]
-name = "embassy-rp-skeleton"
+name = "co2_sensing"
version = "0.1.0"
edition = "2021"
diff --git a/README.md b/README.md
index c67adf3..338204e 100644
--- a/README.md
+++ b/README.md
@@ -1,212 +1,3 @@
-
-
-
-
Embassy RP Skeleton
-
+# co2_sensing
-The **Embassy RP Skeleton** repository is a project template intended as a starting point for developing your own
-firmware for the [`rp2040`][1] based on the [`embassy`][2] asynchronous embedded development framework for [Rust][3].
-
-It includes all of the [`knurling-rs`][4] tooling ([`defmt`][5], [`defmt-rtt`][5], [`panic-probe`][5], [`flip-link`][6],
-[`probe-run`][7]) to enhance the embedded development process.
-
-The default [`cargo`][8] runner is configured as [`probe-run`][7], so you can build, flash and run your firmware _with_
-output from the device via a [`probe-rs`][9] compatible debug probe with the command:
-
-```shell
-$ cargo run
-```
-
-If you want to use a different runner with your debugger (e.g., [`cargo-embed`][10], [`probe-rs-debugger`][11], etc.) or
-if you _aren't_ using a debugger and want the runner to flash the firmware via USB (e.g., [`elf2uf2-rs`][12],
-[`picotool`][13], etc.) then see: [Alternative Runners][14]
-
-## Table of Contents
-1. [Requirements](#requirements)
-2. [Setup](#setup)
- 1. [System Setup](#system-setup)
- 2. [Probe Setup](#probe-setup)
- 3. [Hardware Setup](#hardware-setup)
-3. [Usage](#usage)
-6. [Appendix](#appendix)
-
-## Requirements
-* Ubuntu
-* Raspberry Pi Pico
-* Debug Probe (*or* another Raspberry Pi Pico)
-* Rust Toolchain ([`cargo`][8], [`rustup`][15])
-
-## Setup
-### System Setup
-1. Install [Rust][3] and [`cargo`][8] using [`rustup`][15]
-```shell
-# Install `rustup` for Rust Toolchain
-$ curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
-```
-
-2. Install Cortex-M Target Toolchain Support for [`Rust`][3]
-```shell
-# Install `thumbv6m-none-eabi` Target for `rp2040`
-$ rustup target add thumbv6m-none-eabi
-```
-
-3. Install [`probe-run`][7]
-```shell
-# Install Linux Dependencies
-$ sudo apt install -y libusb-1.0-0-dev libudev-dev
-
-# Install `probe-run`
-$ cargo install probe-run
-
-# (Optional) Install `udev` Rules and Reload
-$ sudo curl https://probe.rs/files/69-probe-rs.rules -o /etc/udev/rules.d/69-probe-rs.rules
-$ sudo udevadm control --reload
-$ sudo udevadm trigger
-
-# (Optional) Add User to `plugdev` Group
-$ sudo usermod -aG plugdev $USER
-```
-
-4. Install [`flip-link`][6]
-```shell
-# Install `flip-link`
-$ cargo install flip-link
-```
-
-### Probe Setup
-You can use a Raspberry Pi Pico as a CMSIS-DAP debug probe.
-
-1. Download CMSIS-DAP debugger firmware [`DapperMime`][16] for the Raspberry Pi Pico
-2. Boot the Raspberry Pi Pico in "Bootloader Mode" by holding the _BOOTSEL_ button while plugging it in
-3. Open the mounted Raspberry Pi Pico storage device
-4. Copy the `raspberry_pi_pico-DapperMime.uf2` onto the Raspberry Pi Pico
-5. Firmware will be flashed to the Raspberry Pi Pico and it will disconnect
-
-Any [`probe-rs`][9] compatible debug probe can be used with [`probe-run`][7]. For a short list of alternative
-compatible debug probes see: [Alternative Debug Probes][17].
-
-### Hardware Setup
-#### Connecting the Raspberry Pi Pico Debug Probe
-The diagram below shows the wiring loom between Raspberry Pi Pico A (left) and Raspberry Pi Pico B (right), configuring
-Raspberry Pi Pico A as a debug probe.
-
-
-
-
-
-
-The connections shown in the diagram above are listed below.
-
-```
-Pico A GND -> Pico B GND
-Pico A GP2 -> Pico B SWCLK
-Pico A GP3 -> Pico B SWDIO
-Pico A GP4/UART1 TX -> Pico B GP1/UART0 RX
-Pico A GP5/UART1 RX -> Pico B GP0/UART0 TX
-Pico A VSYS -> Pico B VSYS
-```
-
-For more information on connecting the two Raspberry Pi Picos, the wiring loom between them and its connections, see
-the section _Appendix A > Wiring Loom_ in: [Getting Started with Raspberry Pi Pico][18]
-
-#### Raspberry Pi Pico Dev Board
-Alternatively, a custom printed Raspberry Pi Pico Dev Board can be used to enhance development, which includes:
-
-* Debug Probe Host (Raspberry Pi Pico)
-* Detachable Target (Raspberry Pi Pico)
-* Serial Interface
-* Reset Button
-* Breakout Pins
-* Selection of _VSys_ or _VBus_ Power Sources
-
-The custom printed Raspberry Pi Pico Dev board is shown below:
-
-
-
-
-
-
-For more information on printing your own custom Raspberry Pi Pico Dev Board, see:
-[Raspberry Pi Pico Dev Board][19]
-
-## Usage
-#### Running
-To run the firmware in debug mode:
-```shell
-$ cargo run
-```
-
-To run the firmware in release mode:
-```shell
-$ cargo run --release
-```
-
-#### Logging
-To change the default [`defmt`][5] log level, see `.cargo/config.toml`:
-```toml
-[env]
-DEFMT_LOG = "trace"
-```
-
-You can also set the log level inline:
-```shell
-$ DEFMT_LOG=debug cargo run
-$ DEFMT_LOG=error cargo run --release
-```
-
-## Appendix
-#### Documentation
-* [Raspberry Pi Pico][1]
-* [Rust][3]
-* [Cargo][8]
-* [Rustup][15]
-* [Embassy][2]
-* [Knurling-RS `defmt`][5]
-* [Knurling-RS `flip-link`][6]
-* [Knurling-RS `probe-run`][7]
-* [Probe-RS `cargo-embed`][10]
-* [Probe-RS `probe-rs-debugger`][11]
-* [Raspberry Pi Pico `elf2uf2`][12]
-* [Raspberry Pi Pico `picotool`][13]
-* [CMSIS-DAP Firmware `DapperMime`][16]
-
-#### Resources
-* [Rust Embedded Book][20]
-* [Awesome Embedded Rust][21]
-* [Getting Started with Raspberry Pi Pico][22]
-* [Ferrous Systems Embedded Training][23]
-* [Ferrous Systems Embedded Teaching Material][24]
-* [RP-RS App Template][25]
-* [RP-RS Alternative Debug Probes][17]
-* [RP-RS Alternative Runners][14]
-* [Knurling-RS App Template][4]
-* [Probe-RS Probe Setup][9]
-* [Raspberry Pi Pico Dev Board][19]
-
-
-
-[1]: https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html
-[2]: https://embassy.dev/dev/index.html
-[3]: https://www.rust-lang.org/
-[4]: https://github.com/knurling-rs/app-template
-[5]: https://github.com/knurling-rs/defmt
-[6]: https://github.com/knurling-rs/flip-link
-[7]: https://github.com/knurling-rs/probe-run
-[8]: https://doc.rust-lang.org/cargo/
-[9]: https://probe.rs/docs/getting-started/probe-setup/
-[10]: https://github.com/probe-rs/cargo-embed
-[11]: https://github.com/probe-rs/vscode
-[12]: https://github.com/JoNil/elf2uf2-rs
-[13]: https://github.com/raspberrypi/picotool
-[14]: https://github.com/rp-rs/rp2040-project-template#alternative-runners
-[15]: https://rustup.rs/
-[16]: https://github.com/majbthrd/DapperMime
-[17]: https://github.com/rp-rs/rp2040-project-template/blob/main/debug_probes.md
-[18]: https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf#picoprobe-wiring-section
-[19]: https://timsavage.github.io/rpi-pico-devboard/
-[20]: https://docs.rust-embedded.org/book/
-[21]: https://github.com/rust-embedded/awesome-embedded-rust
-[22]: https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf
-[23]: https://embedded-trainings.ferrous-systems.com/
-[24]: https://github.com/ferrous-systems/teaching-material
-[25]: https://github.com/rp-rs/rp2040-project-template
+Measuring the CO2 levels at a local club (with permission)
\ No newline at end of file