2021-09-16 06:15:01 +00:00
/**
* Marlin 3 D Printer Firmware
* Copyright ( c ) 2021 MarlinFirmware [ https : //github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl .
* Copyright ( c ) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 3 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program . If not , see < https : //www.gnu.org/licenses/>.
*
*/
/**
* Warnings . cpp
* Test configuration values and give warnings at compile - time .
*/
# include "MarlinConfig.h"
//
// Warnings! Located here so they will appear just once in the build output.
//
# if ENABLED(MARLIN_DEV_MODE)
# warning "WARNING! Disable MARLIN_DEV_MODE for the final build!"
# endif
2021-10-17 21:56:01 +00:00
// Safety Features
# if DISABLED(USE_WATCHDOG)
# warning "Safety Alert! Enable USE_WATCHDOG for the final build!"
# endif
# if HAS_HOTEND && DISABLED(THERMAL_PROTECTION_HOTENDS)
# warning "Safety Alert! Enable THERMAL_PROTECTION_HOTENDS for the final build!"
# endif
# if HAS_HEATED_BED && DISABLED(THERMAL_PROTECTION_BED)
# warning "Safety Alert! Enable THERMAL_PROTECTION_BED for the final build!"
# endif
# if HAS_HEATED_CHAMBER && DISABLED(THERMAL_PROTECTION_CHAMBER)
# warning "Safety Alert! Enable THERMAL_PROTECTION_CHAMBER for the final build!"
# endif
# if HAS_COOLER && DISABLED(THERMAL_PROTECTION_COOLER)
# warning "Safety Alert! Enable THERMAL_PROTECTION_COOLER for the final build!"
# endif
2021-10-18 06:49:35 +00:00
# if ANY_THERMISTOR_IS(998) || ANY_THERMISTOR_IS(999)
# warning "Warning! Don't use dummy thermistors (998 / 999) for final build!"
# endif
2021-10-17 21:56:01 +00:00
2021-09-16 06:15:01 +00:00
# if NONE(HAS_RESUME_CONTINUE, HOST_PROMPT_SUPPORT)
# warning "Your Configuration provides no method to acquire user feedback!"
# endif
2022-02-18 00:44:41 +00:00
# if MB(DUE3DOM_MINI) && PIN_EXISTS(TEMP_2) && !TEMP_SENSOR_BOARD
2022-02-08 23:36:06 +00:00
# warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
2022-02-18 00:44:41 +00:00
# elif MB(BTT_SKR_E3_TURBO) && PIN_EXISTS(TEMP_2) && !TEMP_SENSOR_BOARD
2022-02-08 23:36:06 +00:00
# warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
# endif
2022-01-17 12:56:25 +00:00
# ifndef NO_AUTO_ASSIGN_WARNING
# if AUTO_ASSIGNED_X2_STEPPER
# warning "Note: Auto-assigned X2 STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_X2_MS1
# warning "Note: Auto-assigned X2_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_X2_MS2
# warning "Note: Auto-assigned X2_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_X2_MS3
# warning "Note: Auto-assigned X2_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_X2_CS
# warning "Note: Auto-assigned X2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_X2_DIAG
# if X2_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned X2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned X2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned X2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned X2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned X2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned X2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned X2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned X2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned X2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif X2_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned X2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_Y2_STEPPER
# warning "Note: Auto-assigned Y2 STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
2021-09-16 06:15:01 +00:00
# endif
2022-01-17 12:56:25 +00:00
# if AUTO_ASSIGNED_Y2_MS1
# warning "Note: Auto-assigned Y2_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Y2_MS2
# warning "Note: Auto-assigned Y2_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Y2_MS3
# warning "Note: Auto-assigned Y2_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Y2_CS
# warning "Note: Auto-assigned Y2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Y2_DIAG
# if Y2_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned Y2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned Y2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned Y2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Y2_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned Y2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_Z2_STEPPER
# warning "Note: Auto-assigned Z2 STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z2_MS1
# warning "Note: Auto-assigned Z2_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z2_MS2
# warning "Note: Auto-assigned Z2_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z2_MS3
# warning "Note: Auto-assigned Z2_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z2_CS
# warning "Note: Auto-assigned Z2_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z2_DIAG
# if Z2_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned Z2_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned Z2_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned Z2_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z2_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned Z2_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_Z3_STEPPER
# warning "Note: Auto-assigned Z3 STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z3_CS
# warning "Note: Auto-assigned Z3_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z3_MS1
# warning "Note: Auto-assigned Z3_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z3_MS2
# warning "Note: Auto-assigned Z3_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z3_MS3
# warning "Note: Auto-assigned Z3_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z3_DIAG
# if Z3_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned Z3_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned Z3_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned Z3_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z3_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned Z3_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_Z4_STEPPER
# warning "Note: Auto-assigned Z4 STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z4_CS
# warning "Note: Auto-assigned Z4_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z4_MS1
# warning "Note: Auto-assigned Z4_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z4_MS2
# warning "Note: Auto-assigned Z4_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z4_MS3
# warning "Note: Auto-assigned Z4_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_Z4_DIAG
# if Z4_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned Z4_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned Z4_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned Z4_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif Z4_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned Z4_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_I_STEPPER
# warning "Note: Auto-assigned I STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_I_CS
# warning "Note: Auto-assigned I_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_I_MS1
# warning "Note: Auto-assigned I_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_I_MS2
# warning "Note: Auto-assigned I_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_I_MS3
# warning "Note: Auto-assigned I_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_I_DIAG
# if I_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned I_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned I_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned I_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned I_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned I_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned I_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned I_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned I_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned I_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif I_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned I_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_J_STEPPER
# warning "Note: Auto-assigned J STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_J_CS
# warning "Note: Auto-assigned J_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_J_MS1
# warning "Note: Auto-assigned J_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_J_MS2
# warning "Note: Auto-assigned J_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_J_MS3
# warning "Note: Auto-assigned J_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_J_DIAG
# if J_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned J_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned J_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned J_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned J_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned J_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned J_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned J_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned J_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned J_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif J_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned J_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif
# if AUTO_ASSIGNED_K_STEPPER
# warning "Note: Auto-assigned K STEP / DIR / ENABLE_PINs to unused En_STEP / DIR / ENABLE_PINs. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_K_CS
# warning "Note: Auto-assigned K_CS_PIN to an unused En_CS_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_K_MS1
# warning "Note: Auto-assigned K_MS1_PIN to an unused En_MS1_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_K_MS2
# warning "Note: Auto-assigned K_MS2_PIN to an unused En_MS2_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_K_MS3
# warning "Note: Auto-assigned K_MS3_PIN to an unused En_MS3_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# if AUTO_ASSIGNED_K_DIAG
# if K_USE_ENDSTOP == _XMIN_
# warning "Note: Auto-assigned K_DIAG_PIN to X_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _XMAX_
# warning "Note: Auto-assigned K_DIAG_PIN to X_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _XSTOP_
# warning "Note: Auto-assigned K_DIAG_PIN to X_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _YMIN_
# warning "Note: Auto-assigned K_DIAG_PIN to Y_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _YMAX_
# warning "Note: Auto-assigned K_DIAG_PIN to Y_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _YSTOP_
# warning "Note: Auto-assigned K_DIAG_PIN to Y_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _ZMIN_
# warning "Note: Auto-assigned K_DIAG_PIN to Z_MIN_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _ZMAX_
# warning "Note: Auto-assigned K_DIAG_PIN to Z_MAX_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _ZSTOP_
# warning "Note: Auto-assigned K_DIAG_PIN to Z_STOP_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _XDIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to X_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _YDIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to Y_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _ZDIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to Z_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E0DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E0_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E1DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E1_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E2DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E2_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E3DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E3_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E4DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E4_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E5DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E5_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E6DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E6_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# elif K_USE_ENDSTOP == _E7DIAG_
# warning "Note: Auto-assigned K_DIAG_PIN to E7_DIAG_PIN. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
2021-09-16 06:15:01 +00:00
# endif
2021-10-05 03:16:15 +00:00
2022-01-17 12:56:25 +00:00
# if ENABLED(CHAMBER_FAN) && !defined(CHAMBER_FAN_INDEX)
# warning "Note: Auto-assigned CHAMBER_FAN_INDEX to the first free FAN pin. (Define NO_AUTO_ASSIGN_WARNING to suppress this warning.)"
# endif
# endif // !NO_AUTO_ASSIGN_WARNING
2021-12-05 21:41:39 +00:00
2021-10-15 01:38:03 +00:00
# if IS_LEGACY_TFT
# warning "Don't forget to update your TFT settings in Configuration.h."
# endif
2021-10-05 03:16:15 +00:00
// Ender 3 Pro (but, apparently all Creality 4.2.2 boards)
# if ENABLED(EMIT_CREALITY_422_WARNING) || MB(CREALITY_V4)
2022-01-26 19:40:29 +00:00
# warning "Creality 4.2.2 boards come with a variety of stepper drivers. Check the board label and set the correct *_DRIVER_TYPE! (C=HR4988, E=A4988, A=TMC2208, B=TMC2209, H=TMC2225)."
2021-10-05 03:16:15 +00:00
# endif
2021-10-25 04:33:27 +00:00
2022-02-08 23:36:06 +00:00
# if PRINTCOUNTER_SYNC
# warning "To prevent step loss, motion will pause for PRINTCOUNTER auto-save."
# endif
2021-10-25 04:33:27 +00:00
# if HOMING_Z_WITH_PROBE && IS_CARTESIAN && DISABLED(Z_SAFE_HOMING)
# error "Z_SAFE_HOMING is recommended when homing with a probe. Enable Z_SAFE_HOMING or comment out this line to continue."
# endif
2021-11-02 05:43:40 +00:00
//
// Warn users of potential endstop/DIAG pin conflicts to prevent homing issues when not using sensorless homing
//
2022-01-18 08:30:52 +00:00
# if !USE_SENSORLESS
# if ENABLED(USES_DIAG_JUMPERS) && DISABLED(DIAG_JUMPERS_REMOVED)
2022-01-17 12:56:25 +00:00
# warning "Motherboard DIAG jumpers must be removed when SENSORLESS_HOMING is disabled. (Define DIAG_JUMPERS_REMOVED to suppress this warning.)"
2022-01-18 08:30:52 +00:00
# elif ENABLED(USES_DIAG_PINS) && DISABLED(DIAG_PINS_REMOVED)
# warning "Driver DIAG pins must be physically removed unless SENSORLESS_HOMING is enabled. (See https: //bit.ly/2ZPRlt0) (Define DIAG_PINS_REMOVED to suppress this warning.)"
2022-01-17 12:56:25 +00:00
# endif
2021-11-02 05:43:40 +00:00
# endif
2021-12-14 06:22:06 +00:00
# if CANNOT_EMBED_CONFIGURATION
# warning "Disabled CONFIGURATION_EMBEDDING because the target usually has less flash storage. Define FORCE_CONFIG_EMBED to override."
# endif
2022-01-22 16:14:47 +00:00
# if HAS_LCD_CONTRAST && LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX
# warning "Contrast cannot be changed when LCD_CONTRAST_MIN >= LCD_CONTRAST_MAX."
# endif
2022-02-05 00:51:00 +00:00
2022-03-25 23:34:20 +00:00
# if PROGRESS_MSG_EXPIRE > 0 && HAS_STATUS_MESSAGE_TIMEOUT
# warning "It is recommended not to combine PROGRESS_MSG_EXPIRE with STATUS_MESSAGE_TIMEOUT_SEC."
# endif
2022-02-01 23:35:38 +00:00
/**
2022-04-10 00:21:42 +00:00
* FYSETC / MKS / BTT Mini Panel backlighting
2022-02-01 23:35:38 +00:00
*/
# if EITHER(FYSETC_242_OLED_12864, FYSETC_MINI_12864_2_1) && !ALL(NEOPIXEL_LED, LED_CONTROL_MENU, LED_USER_PRESET_STARTUP, LED_COLOR_PRESETS)
2022-04-10 00:21:42 +00:00
# warning "Your FYSETC / MKS / BTT Mini Panel works best with NEOPIXEL_LED, LED_CONTROL_MENU, LED_USER_PRESET_STARTUP, and LED_COLOR_PRESETS."
2022-02-01 23:35:38 +00:00
# endif
# if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) && DISABLED(RGB_LED)
# warning "Your FYSETC Mini Panel works best with RGB_LED."
# elif EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && DISABLED(LED_USER_PRESET_STARTUP)
# warning "Your FYSETC Mini Panel works best with LED_USER_PRESET_STARTUP."
# endif
# if EITHER(FYSETC_242_OLED_12864, FYSETC_MINI_12864) && BOTH(PSU_CONTROL, HAS_COLOR_LEDS) && !LED_POWEROFF_TIMEOUT
# warning "Your FYSETC display with PSU_CONTROL works best with LED_POWEROFF_TIMEOUT."
# endif
2022-02-05 00:51:00 +00:00
/**
* Maple environment
*/
# ifdef __STM32F1__
# warning "Maple build environments are deprecated. Please use a non-Maple build environment. Report issues to the Marlin Firmware project."
# endif
2022-02-22 02:47:53 +00:00
/**
* Průša MK3 / S / + fan pin reassignment
*/
# if MB(BTT_BTT002_V1_0, EINSY_RAMBO) && DISABLED(NO_MK3_FAN_PINS_WARNING)
# warning "Define MK3_FAN_PINS to swap hotend and part cooling fan pins. (Define NO_MK3_FAN_PINS_WARNING to suppress this warning.)"
# endif
