zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
muele-marlin/Marlin/thermistortables.h

374 lines
12 KiB
C
Raw Normal View History

first commit
2011-08-12 20:28:35 +00:00
#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_
simplified the includes, makefile now works with arduino23
2011-12-22 13:55:45 +00:00
#include "Marlin.h"
and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h
2011-11-15 21:50:43 +00:00
Merged Marlin, Marlin non gen6 and Ultimaker changes
2011-11-04 17:02:56 +00:00
#define OVERSAMPLENR 16
first commit
2011-08-12 20:28:35 +00:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor
first commit
2011-08-12 20:28:35 +00:00
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_1[][2] PROGMEM = {
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Configuration.h Marlin/EEPROMwrite.h Marlin/Marlin.h Marlin/Marlin.pde Marlin/temperature.cpp Marlin/temperature.h Marlin/thermistortables.h
2011-11-05 19:03:38 +00:00
{ 23*OVERSAMPLENR , 300 },
{ 25*OVERSAMPLENR , 295 },
{ 27*OVERSAMPLENR , 290 },
{ 28*OVERSAMPLENR , 285 },
{ 31*OVERSAMPLENR , 280 },
{ 33*OVERSAMPLENR , 275 },
{ 35*OVERSAMPLENR , 270 },
{ 38*OVERSAMPLENR , 265 },
{ 41*OVERSAMPLENR , 260 },
{ 44*OVERSAMPLENR , 255 },
{ 48*OVERSAMPLENR , 250 },
{ 52*OVERSAMPLENR , 245 },
{ 56*OVERSAMPLENR , 240 },
{ 61*OVERSAMPLENR , 235 },
{ 66*OVERSAMPLENR , 230 },
{ 71*OVERSAMPLENR , 225 },
{ 78*OVERSAMPLENR , 220 },
{ 84*OVERSAMPLENR , 215 },
{ 92*OVERSAMPLENR , 210 },
{ 100*OVERSAMPLENR , 205 },
{ 109*OVERSAMPLENR , 200 },
{ 120*OVERSAMPLENR , 195 },
{ 131*OVERSAMPLENR , 190 },
{ 143*OVERSAMPLENR , 185 },
{ 156*OVERSAMPLENR , 180 },
{ 171*OVERSAMPLENR , 175 },
{ 187*OVERSAMPLENR , 170 },
{ 205*OVERSAMPLENR , 165 },
{ 224*OVERSAMPLENR , 160 },
{ 245*OVERSAMPLENR , 155 },
{ 268*OVERSAMPLENR , 150 },
{ 293*OVERSAMPLENR , 145 },
{ 320*OVERSAMPLENR , 140 },
{ 348*OVERSAMPLENR , 135 },
{ 379*OVERSAMPLENR , 130 },
{ 411*OVERSAMPLENR , 125 },
{ 445*OVERSAMPLENR , 120 },
{ 480*OVERSAMPLENR , 115 },
{ 516*OVERSAMPLENR , 110 },
{ 553*OVERSAMPLENR , 105 },
{ 591*OVERSAMPLENR , 100 },
{ 628*OVERSAMPLENR , 95 },
{ 665*OVERSAMPLENR , 90 },
{ 702*OVERSAMPLENR , 85 },
{ 737*OVERSAMPLENR , 80 },
{ 770*OVERSAMPLENR , 75 },
{ 801*OVERSAMPLENR , 70 },
{ 830*OVERSAMPLENR , 65 },
{ 857*OVERSAMPLENR , 60 },
{ 881*OVERSAMPLENR , 55 },
{ 903*OVERSAMPLENR , 50 },
{ 922*OVERSAMPLENR , 45 },
{ 939*OVERSAMPLENR , 40 },
{ 954*OVERSAMPLENR , 35 },
{ 966*OVERSAMPLENR , 30 },
{ 977*OVERSAMPLENR , 25 },
{ 985*OVERSAMPLENR , 20 },
{ 993*OVERSAMPLENR , 15 },
{ 999*OVERSAMPLENR , 10 },
{ 1004*OVERSAMPLENR , 5 },
{ 1008*OVERSAMPLENR , 0 } //safety
first commit
2011-08-12 20:28:35 +00:00
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_2[][2] PROGMEM = {
Added thermistor tables
2011-11-04 21:51:14 +00:00
{1*OVERSAMPLENR, 848},
{54*OVERSAMPLENR, 275},
{107*OVERSAMPLENR, 228},
{160*OVERSAMPLENR, 202},
{213*OVERSAMPLENR, 185},
{266*OVERSAMPLENR, 171},
{319*OVERSAMPLENR, 160},
{372*OVERSAMPLENR, 150},
{425*OVERSAMPLENR, 141},
{478*OVERSAMPLENR, 133},
{531*OVERSAMPLENR, 125},
{584*OVERSAMPLENR, 118},
{637*OVERSAMPLENR, 110},
{690*OVERSAMPLENR, 103},
{743*OVERSAMPLENR, 95},
{796*OVERSAMPLENR, 86},
{849*OVERSAMPLENR, 77},
{902*OVERSAMPLENR, 65},
{955*OVERSAMPLENR, 49},
{1008*OVERSAMPLENR, 17},
{1020*OVERSAMPLENR, 0} //safety
first commit
2011-08-12 20:28:35 +00:00
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_3[][2] PROGMEM = {
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Configuration.h Marlin/EEPROMwrite.h Marlin/Marlin.h Marlin/Marlin.pde Marlin/temperature.cpp Marlin/temperature.h Marlin/thermistortables.h
2011-11-05 19:03:38 +00:00
{1*OVERSAMPLENR,864},
{21*OVERSAMPLENR,300},
{25*OVERSAMPLENR,290},
{29*OVERSAMPLENR,280},
{33*OVERSAMPLENR,270},
{39*OVERSAMPLENR,260},
{46*OVERSAMPLENR,250},
{54*OVERSAMPLENR,240},
{64*OVERSAMPLENR,230},
{75*OVERSAMPLENR,220},
{90*OVERSAMPLENR,210},
{107*OVERSAMPLENR,200},
{128*OVERSAMPLENR,190},
{154*OVERSAMPLENR,180},
{184*OVERSAMPLENR,170},
{221*OVERSAMPLENR,160},
{265*OVERSAMPLENR,150},
{316*OVERSAMPLENR,140},
{375*OVERSAMPLENR,130},
{441*OVERSAMPLENR,120},
{513*OVERSAMPLENR,110},
{588*OVERSAMPLENR,100},
{734*OVERSAMPLENR,80},
{856*OVERSAMPLENR,60},
{938*OVERSAMPLENR,40},
{986*OVERSAMPLENR,20},
{1008*OVERSAMPLENR,0},
{1018*OVERSAMPLENR,-20}
};
first commit
2011-08-12 20:28:35 +00:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_4[][2] PROGMEM = {
Added thermistor tables
2011-11-04 21:51:14 +00:00
{1*OVERSAMPLENR, 430},
{54*OVERSAMPLENR, 137},
{107*OVERSAMPLENR, 107},
{160*OVERSAMPLENR, 91},
{213*OVERSAMPLENR, 80},
{266*OVERSAMPLENR, 71},
{319*OVERSAMPLENR, 64},
{372*OVERSAMPLENR, 57},
{425*OVERSAMPLENR, 51},
{478*OVERSAMPLENR, 46},
{531*OVERSAMPLENR, 41},
{584*OVERSAMPLENR, 35},
{637*OVERSAMPLENR, 30},
{690*OVERSAMPLENR, 25},
{743*OVERSAMPLENR, 20},
{796*OVERSAMPLENR, 14},
{849*OVERSAMPLENR, 7},
{902*OVERSAMPLENR, 0},
{955*OVERSAMPLENR, -11},
{1008*OVERSAMPLENR, -35}
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_5[][2] PROGMEM = {
Added thermistor tables
2011-11-04 21:51:14 +00:00
{1*OVERSAMPLENR, 713},
{18*OVERSAMPLENR, 316},
{35*OVERSAMPLENR, 266},
{52*OVERSAMPLENR, 239},
{69*OVERSAMPLENR, 221},
{86*OVERSAMPLENR, 208},
{103*OVERSAMPLENR, 197},
{120*OVERSAMPLENR, 188},
{137*OVERSAMPLENR, 181},
{154*OVERSAMPLENR, 174},
{171*OVERSAMPLENR, 169},
{188*OVERSAMPLENR, 163},
{205*OVERSAMPLENR, 159},
{222*OVERSAMPLENR, 154},
{239*OVERSAMPLENR, 150},
{256*OVERSAMPLENR, 147},
{273*OVERSAMPLENR, 143},
{290*OVERSAMPLENR, 140},
{307*OVERSAMPLENR, 136},
{324*OVERSAMPLENR, 133},
{341*OVERSAMPLENR, 130},
{358*OVERSAMPLENR, 128},
{375*OVERSAMPLENR, 125},
{392*OVERSAMPLENR, 122},
{409*OVERSAMPLENR, 120},
{426*OVERSAMPLENR, 117},
{443*OVERSAMPLENR, 115},
{460*OVERSAMPLENR, 112},
{477*OVERSAMPLENR, 110},
{494*OVERSAMPLENR, 108},
{511*OVERSAMPLENR, 106},
{528*OVERSAMPLENR, 103},
{545*OVERSAMPLENR, 101},
{562*OVERSAMPLENR, 99},
{579*OVERSAMPLENR, 97},
{596*OVERSAMPLENR, 95},
{613*OVERSAMPLENR, 92},
{630*OVERSAMPLENR, 90},
{647*OVERSAMPLENR, 88},
{664*OVERSAMPLENR, 86},
{681*OVERSAMPLENR, 84},
{698*OVERSAMPLENR, 81},
{715*OVERSAMPLENR, 79},
{732*OVERSAMPLENR, 77},
{749*OVERSAMPLENR, 75},
{766*OVERSAMPLENR, 72},
{783*OVERSAMPLENR, 70},
{800*OVERSAMPLENR, 67},
{817*OVERSAMPLENR, 64},
{834*OVERSAMPLENR, 61},
{851*OVERSAMPLENR, 58},
{868*OVERSAMPLENR, 55},
{885*OVERSAMPLENR, 52},
{902*OVERSAMPLENR, 48},
{919*OVERSAMPLENR, 44},
{936*OVERSAMPLENR, 40},
{953*OVERSAMPLENR, 34},
{970*OVERSAMPLENR, 28},
{987*OVERSAMPLENR, 20},
{1004*OVERSAMPLENR, 8},
{1021*OVERSAMPLENR, 0}
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_6[][2] PROGMEM = {
Added thermistor tables
2011-11-04 21:51:14 +00:00
{28*OVERSAMPLENR, 250},
{31*OVERSAMPLENR, 245},
{35*OVERSAMPLENR, 240},
{39*OVERSAMPLENR, 235},
{42*OVERSAMPLENR, 230},
{44*OVERSAMPLENR, 225},
{49*OVERSAMPLENR, 220},
{53*OVERSAMPLENR, 215},
{62*OVERSAMPLENR, 210},
{73*OVERSAMPLENR, 205},
{72*OVERSAMPLENR, 200},
{94*OVERSAMPLENR, 190},
{102*OVERSAMPLENR, 185},
{116*OVERSAMPLENR, 170},
{143*OVERSAMPLENR, 160},
{183*OVERSAMPLENR, 150},
{223*OVERSAMPLENR, 140},
{270*OVERSAMPLENR, 130},
{318*OVERSAMPLENR, 120},
{383*OVERSAMPLENR, 110},
{413*OVERSAMPLENR, 105},
{439*OVERSAMPLENR, 100},
{484*OVERSAMPLENR, 95},
{513*OVERSAMPLENR, 90},
{607*OVERSAMPLENR, 80},
{664*OVERSAMPLENR, 70},
{781*OVERSAMPLENR, 60},
{810*OVERSAMPLENR, 55},
{849*OVERSAMPLENR, 50},
{914*OVERSAMPLENR, 45},
{914*OVERSAMPLENR, 40},
{935*OVERSAMPLENR, 35},
{954*OVERSAMPLENR, 30},
{970*OVERSAMPLENR, 25},
{978*OVERSAMPLENR, 22},
{1008*OVERSAMPLENR, 3}
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit 3682d9bd5b34bdc6560d97278d6d7eff3243bddc.
2012-05-04 10:24:07 +00:00
const short temptable_7[][2] PROGMEM = {
Added thermistor tables
2011-11-04 21:51:14 +00:00
{46*OVERSAMPLENR, 270},
{50*OVERSAMPLENR, 265},
{54*OVERSAMPLENR, 260},
{58*OVERSAMPLENR, 255},
{62*OVERSAMPLENR, 250},
{67*OVERSAMPLENR, 245},
{72*OVERSAMPLENR, 240},
{79*OVERSAMPLENR, 235},
{85*OVERSAMPLENR, 230},
{91*OVERSAMPLENR, 225},
{99*OVERSAMPLENR, 220},
{107*OVERSAMPLENR, 215},
{116*OVERSAMPLENR, 210},
{126*OVERSAMPLENR, 205},
{136*OVERSAMPLENR, 200},
{149*OVERSAMPLENR, 195},
{160*OVERSAMPLENR, 190},
{175*OVERSAMPLENR, 185},
{191*OVERSAMPLENR, 180},
{209*OVERSAMPLENR, 175},
{224*OVERSAMPLENR, 170},
{246*OVERSAMPLENR, 165},
{267*OVERSAMPLENR, 160},
{293*OVERSAMPLENR, 155},
{316*OVERSAMPLENR, 150},
{340*OVERSAMPLENR, 145},
{364*OVERSAMPLENR, 140},
{396*OVERSAMPLENR, 135},
{425*OVERSAMPLENR, 130},
{460*OVERSAMPLENR, 125},
{489*OVERSAMPLENR, 120},
{526*OVERSAMPLENR, 115},
{558*OVERSAMPLENR, 110},
{591*OVERSAMPLENR, 105},
{628*OVERSAMPLENR, 100},
{660*OVERSAMPLENR, 95},
{696*OVERSAMPLENR, 90},
{733*OVERSAMPLENR, 85},
{761*OVERSAMPLENR, 80},
{794*OVERSAMPLENR, 75},
{819*OVERSAMPLENR, 70},
{847*OVERSAMPLENR, 65},
{870*OVERSAMPLENR, 60},
{892*OVERSAMPLENR, 55},
{911*OVERSAMPLENR, 50},
{929*OVERSAMPLENR, 45},
{944*OVERSAMPLENR, 40},
{959*OVERSAMPLENR, 35},
{971*OVERSAMPLENR, 30},
{981*OVERSAMPLENR, 25},
{989*OVERSAMPLENR, 20},
{994*OVERSAMPLENR, 15},
{1001*OVERSAMPLENR, 10},
{1005*OVERSAMPLENR, 5}
};
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
Added thermistor tables
2011-11-04 21:51:14 +00:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#ifdef THERMISTORHEATER_0
#define heater_0_temptable TT_NAME(THERMISTORHEATER_0)
#define heater_0_temptable_len (sizeof(heater_0_temptable)/sizeof(*heater_0_temptable))
#else
#ifdef HEATER_0_USES_THERMISTOR
#error No heater 0 thermistor table specified
#else // HEATER_0_USES_THERMISTOR
#define heater_0_temptable 0
#define heater_0_temptable_len 0
#endif // HEATER_0_USES_THERMISTOR
Temperature changes
2011-11-05 18:21:36 +00:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#ifdef THERMISTORHEATER_1
#define heater_1_temptable TT_NAME(THERMISTORHEATER_1)
#define heater_1_temptable_len (sizeof(heater_1_temptable)/sizeof(*heater_1_temptable))
#else
#ifdef HEATER_1_USES_THERMISTOR
#error No heater 1 thermistor table specified
#else // HEATER_1_USES_THERMISTOR
#define heater_1_temptable 0
#define heater_1_temptable_len 0
#endif // HEATER_1_USES_THERMISTOR
Added thermistor tables
2011-11-04 21:51:14 +00:00
#endif
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#ifdef THERMISTORHEATER_2
#define heater_2_temptable TT_NAME(THERMISTORHEATER_2)
#define heater_2_temptable_len (sizeof(heater_2_temptable)/sizeof(*heater_2_temptable))
#else
#ifdef HEATER_2_USES_THERMISTOR
#error No heater 2 thermistor table specified
#else // HEATER_2_USES_THERMISTOR
#define heater_2_temptable 0
#define heater_2_temptable_len 0
#endif // HEATER_2_USES_THERMISTOR
#endif
first commit
2011-08-12 20:28:35 +00:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4
2011-12-06 04:33:33 +00:00
#ifdef THERMISTORBED
#define bedtemptable TT_NAME(THERMISTORBED)
#define bedtemptable_len (sizeof(bedtemptable)/sizeof(*bedtemptable))
#else
#ifdef BED_USES_THERMISTOR
#error No bed thermistor table specified
#endif // BED_USES_THERMISTOR
Added thermistor tables
2011-11-04 21:51:14 +00:00
#endif
first commit
2011-08-12 20:28:35 +00:00
#endif //THERMISTORTABLES_H_
Added thermistor tables
2011-11-04 21:51:14 +00:00
Reference in a new issue Copy permalink