muele-marlin/Marlin/language_kana_utf8.h

/**
 * Japanese (Kana UTF8 version)
 *
 * LCD Menu Messages
 * See also documentation/LCDLanguageFont.md
 *
 */

#ifndef LANGUAGE_KANA_UTF_H
#define LANGUAGE_KANA_UTF_H

#define MAPPER_E382E383
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_KANA

// This is very crude replacement of the codes used in language_kana.h from somebody who really does not know what he is doing.
// Just to show the potential benefit of unicode.
// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.

// 片仮名表示定義
#define WELCOME_MSG                         MACHINE_NAME " ready."
#define MSG_SD_INSERTED                     "カード ソウニュウサレマシタ"          // "Card inserted"
#define MSG_SD_REMOVED                      "カードガアリマセン"               // "Card removed"
#define MSG_MAIN                            "メイン"                        // "Main"
#define MSG_AUTOSTART                       "ジドウカイシ"                   // "Autostart"
#define MSG_DISABLE_STEPPERS                "モーターデンゲン オフ"             // "Disable steppers"
#define MSG_AUTO_HOME                       "ゲンテンニイドウ"                // "Auto home"
#define MSG_LEVEL_BED_HOMING                "Homing"
#define MSG_SET_HOME_OFFSETS                "キジュンオフセットセッテイ"         // "Set home offsets"
#define MSG_SET_ORIGIN                      "キジュンセット"                 // "Set origin"
#define MSG_PREHEAT_PLA                     "PLA ヨネツ"                    // "Preheat PLA"
#define MSG_PREHEAT_PLA_N                   MSG_PREHEAT_PLA " "
#define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " スベテ"      // " All"
#define MSG_PREHEAT_PLA_BEDONLY             MSG_PREHEAT_PLA " ベッド"    // "Bed"
#define MSG_PREHEAT_PLA_SETTINGS            MSG_PREHEAT_PLA " セッテイ"     // "conf"
#define MSG_PREHEAT_ABS                     "ABS ヨネツ"                    // "Preheat ABS"
#define MSG_PREHEAT_ABS_N                   MSG_PREHEAT_ABS " "
#define MSG_PREHEAT_ABS_ALL                 MSG_PREHEAT_ABS " スベテ"      // " All"
#define MSG_PREHEAT_ABS_BEDONLY             MSG_PREHEAT_ABS " ベッド"    // "Bed"
#define MSG_PREHEAT_ABS_SETTINGS            MSG_PREHEAT_ABS " セッテイ"    // "conf"
#define MSG_COOLDOWN                        "カネツテイシ"                    // "Cooldown"
#define MSG_SWITCH_PS_ON                    "デンゲン オン"                 // "Switch power on"
#define MSG_SWITCH_PS_OFF                   "デンゲン オフ"                 // "Switch power off"
#define MSG_EXTRUDE                         "オシダシ"                     // "Extrude"
#define MSG_RETRACT                         "リトラクト"                     // "Retract"
#define MSG_MOVE_AXIS                       "ジクイドウ"                   // "Move axis"
#define MSG_MOVE_X                          "Xジク イドウ"                 // "Move X"
#define MSG_MOVE_Y                          "Yジク イドウ"                 // "Move Y"
#define MSG_MOVE_Z                          "Zジク イドウ"                 // "Move Z"
#define MSG_MOVE_E                          "エクストルーダー"                // "Extruder"
#define MSG_MOVE_01MM                       "0.1mm イドウ"                 // "Move 0.1mm"
#define MSG_MOVE_1MM                        "  1mm イドウ"                 // "Move 1mm"
#define MSG_MOVE_10MM                       " 10mm イドウ"                 // "Move 10mm"
#define MSG_SPEED                           "スピード"                     // "Speed"
#define MSG_NOZZLE                          "ノズル"                       // "Nozzle"
#define MSG_BED                             "ベッド"                     // "Bed"
#define MSG_FAN_SPEED                       "ファンソクド"                    // "Fan speed"
#define MSG_FLOW                            "オクリリョウ"                     // "Flow"
#define MSG_CONTROL                         "コントロール"                    // "Control"
#define MSG_MIN                             LCD_STR_THERMOMETER " Min"
#define MSG_MAX                             LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP                        "ジドウオンド"                  // "Autotemp"
#define MSG_ON                              "On "
#define MSG_OFF                             "Off"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_ACC                             "カソクド"                     // "Accel"
#define MSG_VXY_JERK                        "Vxy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ve-jerk"
#define MSG_VMAX                            "Vmax "
#define MSG_X                               "x"
#define MSG_Y                               "y"
#define MSG_Z                               "z"
#define MSG_E                               "e"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "VTrav min"
#define MSG_AMAX                            "Amax "
#define MSG_A_RETRACT                       "A-retract"
#define MSG_XSTEPS                          "Xsteps/mm"
#define MSG_YSTEPS                          "Ysteps/mm"
#define MSG_ZSTEPS                          "Zsteps/mm"
#define MSG_ESTEPS                          "Esteps/mm"
#define MSG_TEMPERATURE                     "オンド"                      // "Temperature"
#define MSG_MOTION                          "ウゴキセッテイ"                // "Motion"
#define MSG_VOLUMETRIC                      "フィラメント"                    // "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E in mm3"
#define MSG_FILAMENT_DIAM                   "Fil. Dia."
#define MSG_CONTRAST                        "LCDコントラスト"                 // "LCD contrast"
#define MSG_STORE_EPROM                     "メモリヘカクノウ"                 // "Store memory"
#define MSG_LOAD_EPROM                      "メモリカラヨミコミ"               // "Load memory"
#define MSG_RESTORE_FAILSAFE                "セッテイリセット"               // "Restore failsafe"
#define MSG_REFRESH                         "リフレッシュ"                  // "Refresh"
#define MSG_WATCH                           "インフォ"                     // "Info screen"
#define MSG_PREPARE                         "ジュンビセッテイ"             //"Prepare"
#define MSG_TUNE                            "チョウセイ"                    // "Tune"
#define MSG_PAUSE_PRINT                     "イチジテイシ"                  // "Pause print"
#define MSG_RESUME_PRINT                    "プリントサイカイ"                // "Resume print"
#define MSG_STOP_PRINT                      "プリントテイシ"                 // "Stop print"
#define MSG_CARD_MENU                       "SDカードカラプリント"            // "Print from SD"
#define MSG_NO_CARD                         "SDカードガアリマセン"            // "No SD card"
#define MSG_DWELL                           "スリープ"                     // "Sleep..."
#define MSG_USERWAIT                        "シバラクオマチクダサイ"           // "Wait for user..."
#define MSG_RESUMING                        "プリントサイカイ"                // "Resuming print"
#define MSG_PRINT_ABORTED                   "プリントチュウシサレマシタ"          // "Print aborted"
#define MSG_NO_MOVE                         "ウゴキマセン"                  // "No move."
#define MSG_KILLED                          "ショウキョ"                     // "KILLED. "
#define MSG_STOPPED                         "テイシシマシタ"                  // "STOPPED. "
#define MSG_CONTROL_RETRACT                 "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP            "Swap Re.mm"
#define MSG_CONTROL_RETRACTF                "Retract  V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"
#define MSG_AUTORETRACT                     "AutoRetr."
#define MSG_FILAMENTCHANGE                  "フィラメントコウカン"               // "Change filament"
#define MSG_INIT_SDCARD                     "SDカードサイヨミコミ"              // "Init. SD card"
#define MSG_CNG_SDCARD                      "SDカードコウカン"                // "Change SD card"
#define MSG_ZPROBE_OUT                      "Zプローブ ベッドガイ"         // "Z probe out. bed"
#define MSG_POSITION_UNKNOWN                "ゲンテンハXYイドウゴZ"           // "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET                  "Zオフセット"                   // "Z Offset"
#define MSG_BABYSTEP_X                      "ビドウ X"                    // "Babystep X"
#define MSG_BABYSTEP_Y                      "ビドウ Y"                    // "Babystep Y"
#define MSG_BABYSTEP_Z                      "ビドウ Z"                    // "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "Endstop abort"
#define MSG_END_HOUR                        "hours"
#define MSG_END_MINUTE                      "minutes"

#if ENABLED(DELTA_CALIBRATION_MENU)
  #define MSG_DELTA_CALIBRATE               "Delta Calibration"
  #define MSG_DELTA_CALIBRATE_X             "Calibrate X"
  #define MSG_DELTA_CALIBRATE_Y             "Calibrate Y"
  #define MSG_DELTA_CALIBRATE_Z             "Calibrate Z"
  #define MSG_DELTA_CALIBRATE_CENTER        "Calibrate Center"
#endif // DELTA_CALIBRATION_MENU

#endif // LANGUAGE_KANA_UTF_H
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`/**`
			`* Japanese (Kana UTF8 version)`
			`*`
			`* LCD Menu Messages`
Applied thinkyheads corrections from 2015-03-17 2015-03-17 10:23:44 +00:00			`* See also documentation/LCDLanguageFont.md`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`*`
			`*/`
Cleanup file formatting 2015-09-12 02:52:21 +00:00
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#ifndef LANGUAGE_KANA_UTF_H`
			`#define LANGUAGE_KANA_UTF_H`

			`#define MAPPER_E382E383`
Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 2015-03-13 13:26:58 +00:00			`// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h`
			`//#define SIMULATE_ROMFONT`
			`#define DISPLAY_CHARSET_ISO10646_KANA`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00
			`// This is very crude replacement of the codes used in language_kana.h from somebody who really does not know what he is doing.`
Cleanup file formatting 2015-09-12 02:52:21 +00:00			`// Just to show the potential benefit of unicode.`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.`

			`// 片仮名表示定義`
			`#define WELCOME_MSG MACHINE_NAME " ready."`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_SD_INSERTED "カードソウニュウサレマシタ" // "Card inserted"`
			`#define MSG_SD_REMOVED "カードガアリマセン" // "Card removed"`
			`#define MSG_MAIN "メイン" // "Main"`
			`#define MSG_AUTOSTART "ジドウカイシ" // "Autostart"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_DISABLE_STEPPERS "モーターデンゲンオフ" // "Disable steppers"`
			`#define MSG_AUTO_HOME "ゲンテンニイドウ" // "Auto home"`
"Homing" as a translatable string 2016-03-19 11:41:03 +00:00			`#define MSG_LEVEL_BED_HOMING "Homing"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets"`
			`#define MSG_SET_ORIGIN "キジュンセット" // "Set origin"`
			`#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // "Bed"`
			`#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // "conf"`
			`#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // "Bed"`
			`#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セッテイ" // "conf"`
			`#define MSG_COOLDOWN "カネツテイシ" // "Cooldown"`
			`#define MSG_SWITCH_PS_ON "デンゲンオン" // "Switch power on"`
			`#define MSG_SWITCH_PS_OFF "デンゲンオフ" // "Switch power off"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_EXTRUDE "オシダシ" // "Extrude"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_RETRACT "リトラクト" // "Retract"`
			`#define MSG_MOVE_AXIS "ジクイドウ" // "Move axis"`
			`#define MSG_MOVE_X "Xジクイドウ" // "Move X"`
			`#define MSG_MOVE_Y "Yジクイドウ" // "Move Y"`
			`#define MSG_MOVE_Z "Zジクイドウ" // "Move Z"`
			`#define MSG_MOVE_E "エクストルーダー" // "Extruder"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_MOVE_01MM "0.1mm イドウ" // "Move 0.1mm"`
			`#define MSG_MOVE_1MM " 1mm イドウ" // "Move 1mm"`
			`#define MSG_MOVE_10MM " 10mm イドウ" // "Move 10mm"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_SPEED "スピード" // "Speed"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_NOZZLE "ノズル" // "Nozzle"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_BED "ベッド" // "Bed"`
			`#define MSG_FAN_SPEED "ファンソクド" // "Fan speed"`
			`#define MSG_FLOW "オクリリョウ" // "Flow"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_CONTROL "コントロール" // "Control"`
			`#define MSG_MIN LCD_STR_THERMOMETER " Min"`
			`#define MSG_MAX LCD_STR_THERMOMETER " Max"`
			`#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_AUTOTEMP "ジドウオンド" // "Autotemp"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_ON "On "`
			`#define MSG_OFF "Off"`
			`#define MSG_PID_P "PID-P"`
			`#define MSG_PID_I "PID-I"`
			`#define MSG_PID_D "PID-D"`
			`#define MSG_PID_C "PID-C"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_ACC "カソクド" // "Accel"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_VXY_JERK "Vxy-jerk"`
			`#define MSG_VZ_JERK "Vz-jerk"`
			`#define MSG_VE_JERK "Ve-jerk"`
			`#define MSG_VMAX "Vmax "`
			`#define MSG_X "x"`
			`#define MSG_Y "y"`
			`#define MSG_Z "z"`
			`#define MSG_E "e"`
			`#define MSG_VMIN "Vmin"`
			`#define MSG_VTRAV_MIN "VTrav min"`
			`#define MSG_AMAX "Amax "`
			`#define MSG_A_RETRACT "A-retract"`
			`#define MSG_XSTEPS "Xsteps/mm"`
			`#define MSG_YSTEPS "Ysteps/mm"`
			`#define MSG_ZSTEPS "Zsteps/mm"`
			`#define MSG_ESTEPS "Esteps/mm"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_TEMPERATURE "オンド" // "Temperature"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_MOTION "ウゴキセッテイ" // "Motion"`
			`#define MSG_VOLUMETRIC "フィラメント" // "Filament"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_VOLUMETRIC_ENABLED "E in mm3"`
Show nozzles, heaters, and extruders numbered 1-4 2015-09-12 02:52:01 +00:00			`#define MSG_FILAMENT_DIAM "Fil. Dia."`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_STORE_EPROM "メモリヘカクノウ" // "Store memory"`
			`#define MSG_LOAD_EPROM "メモリカラヨミコミ" // "Load memory"`
			`#define MSG_RESTORE_FAILSAFE "セッテイリセット" // "Restore failsafe"`
			`#define MSG_REFRESH "リフレッシュ" // "Refresh"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_WATCH "インフォ" // "Info screen"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_PREPARE "ジュンビセッテイ" //"Prepare"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_TUNE "チョウセイ" // "Tune"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_PAUSE_PRINT "イチジテイシ" // "Pause print"`
			`#define MSG_RESUME_PRINT "プリントサイカイ" // "Resume print"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_STOP_PRINT "プリントテイシ" // "Stop print"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_CARD_MENU "SDカードカラプリント" // "Print from SD"`
			`#define MSG_NO_CARD "SDカードガアリマセン" // "No SD card"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_DWELL "スリープ" // "Sleep..."`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_USERWAIT "シバラクオマチクダサイ" // "Wait for user..."`
			`#define MSG_RESUMING "プリントサイカイ" // "Resuming print"`
			`#define MSG_PRINT_ABORTED "プリントチュウシサレマシタ" // "Print aborted"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_NO_MOVE "ウゴキマセン" // "No move."`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_KILLED "ショウキョ" // "KILLED. "`
			`#define MSG_STOPPED "テイシシマシタ" // "STOPPED. "`
			`#define MSG_CONTROL_RETRACT "Retract mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"`
			`#define MSG_CONTROL_RETRACTF "Retract V"`
			`#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"`
			`#define MSG_AUTORETRACT "AutoRetr."`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_FILAMENTCHANGE "フィラメントコウカン" // "Change filament"`
			`#define MSG_INIT_SDCARD "SDカードサイヨミコミ" // "Init. SD card"`
			`#define MSG_CNG_SDCARD "SDカードコウカン" // "Change SD card"`
			`#define MSG_ZPROBE_OUT "Zプローブベッドガイ" // "Z probe out. bed"`
Make use of ligatures in language_kana_utf8.h 2015-03-13 18:47:40 +00:00			`#define MSG_POSITION_UNKNOWN "ゲンテンハXYイドウゴZ" // "Home X/Y before Z"`
Update language_kana_utf8.h 2015-10-25 11:45:48 +00:00			`#define MSG_ZPROBE_ZOFFSET "Zオフセット" // "Z Offset"`
			`#define MSG_BABYSTEP_X "ビドウ X" // "Babystep X"`
			`#define MSG_BABYSTEP_Y "ビドウ Y" // "Babystep Y"`
			`#define MSG_BABYSTEP_Z "ビドウ Z" // "Babystep Z"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_ENDSTOP_ABORT "Endstop abort"`
Added new trasnslatable labels. * Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files. * Available translations: EN, FR, DE, ES, IT, PT, PT-BR. 2015-03-31 14:59:43 +00:00			`#define MSG_END_HOUR "hours"`
			`#define MSG_END_MINUTE "minutes"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00
Overridable Options - Part 3 (PR#2555) Apply `ENABLED` / `DISABLED` macros to language-related files. 2015-07-31 05:03:15 +00:00			`#if ENABLED(DELTA_CALIBRATION_MENU)`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define MSG_DELTA_CALIBRATE "Delta Calibration"`
			`#define MSG_DELTA_CALIBRATE_X "Calibrate X"`
			`#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#endif // DELTA_CALIBRATION_MENU`

			`#endif // LANGUAGE_KANA_UTF_H`