muele-marlin/Marlin/src/pins/pins_THE_BORG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#if !defined(STM32F7)
    #error "Oops!  Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
#endif

#define DEFAULT_MACHINE_NAME "The-Borge"
#define BOARD_NAME "The-Borge"

#define LARGE_FLASH true

#define E2END 0xFFF // EEPROM end address

// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE

#if E_STEPPERS > 3 || HOTENDS > 3
  #error "The-Borg supports up to 3 hotends / E-steppers."
#endif

#define PORTA 0
#define PORTB 1
#define PORTC 2
#define PORTD 3
#define PORTE 4
#define PORTF 5
#define PORTG 6

#define _STM32_PIN(_PORT,_PIN) ((_PORT * 16) + _PIN)


//
// Limit Switches
//
#define X_MIN_PIN          _STM32_PIN(PORTE, 9)
#define X_MAX_PIN          _STM32_PIN(PORTE, 10)
#define Y_MIN_PIN          _STM32_PIN(PORTE, 7)
#define Y_MAX_PIN          _STM32_PIN(PORTE, 8)
#define Z_MIN_PIN          _STM32_PIN(PORTF, 15)
#define Z_MAX_PIN          _STM32_PIN(PORTG, 0)
#define E_MIN_PIN          _STM32_PIN(PORTE, 2)
#define E_MAX_PIN          _STM32_PIN(PORTE, 3)
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN  _STM32_PIN(PORTA, 4)
#endif

//
// Steppers
//

#define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0)

#define X_STEP_PIN         _STM32_PIN(PORTC, 6) //96, 39 in arduino
#define X_DIR_PIN          _STM32_PIN(PORTC, 7)
#define X_ENABLE_PIN       _STM32_PIN(PORTC, 8)


#define Y_STEP_PIN         _STM32_PIN(PORTD, 9)
#define Y_DIR_PIN          _STM32_PIN(PORTD, 10)
#define Y_ENABLE_PIN       _STM32_PIN(PORTD, 11)

#define Z_STEP_PIN         _STM32_PIN(PORTE, 15)
#define Z_DIR_PIN          _STM32_PIN(PORTG, 1)
#define Z_ENABLE_PIN       _STM32_PIN(PORTD, 8)


#define E0_STEP_PIN        _STM32_PIN(PORTB, 1)
#define E0_DIR_PIN         _STM32_PIN(PORTB, 2)
#define E0_ENABLE_PIN      _STM32_PIN(PORTE, 11)


#define E1_STEP_PIN        _STM32_PIN(PORTC, 4)
#define E1_DIR_PIN         _STM32_PIN(PORTC, 5)
#define E1_ENABLE_PIN      _STM32_PIN(PORTB, 0)


#define E2_STEP_PIN        _STM32_PIN(PORTC, 13)
#define E2_DIR_PIN         _STM32_PIN(PORTC, 14)
#define E2_ENABLE_PIN      _STM32_PIN(PORTC, 15)

#define Z2_STEP_PIN        _STM32_PIN(PORTC, 13)
#define Z2_DIR_PIN         _STM32_PIN(PORTC, 14)
#define Z2_ENABLE_PIN      _STM32_PIN(PORTC, 15)







#define SCK_PIN            _STM32_PIN(PORTA, 5)
#define MISO_PIN           _STM32_PIN(PORTA, 6)
#define MOSI_PIN           _STM32_PIN(PORTA, 7)

#define SPI1_SCK_PIN       _STM32_PIN(PORTA, 5)
#define SPI1_MISO_PIN      _STM32_PIN(PORTA, 6)
#define SPI1_MOSI_PIN      _STM32_PIN(PORTA, 7)

#define SPI6_SCK_PIN       _STM32_PIN(PORTG, 13)
#define SPI6_MISO_PIN      _STM32_PIN(PORTG, 12)
#define SPI6_MOSI_PIN      _STM32_PIN(PORTG, 14)




//
// Temperature Sensors
//

#define TEMP_0_PIN         _STM32_PIN(PORTC, 3)   // Analog Input
#define TEMP_1_PIN         _STM32_PIN(PORTC, 2)   // Analog Input
#define TEMP_2_PIN         _STM32_PIN(PORTC, 1)   // Analog Input
#define TEMP_3_PIN         _STM32_PIN(PORTC, 0)   // Analog Input

#define TEMP_BED_PIN       _STM32_PIN(PORTF, 10)  // Analog Input

#define TEMP_5_PIN         _STM32_PIN(PORTE, 12)  // Analog Input, Probe temp


//
// Heaters / Fans
//
#define HEATER_0_PIN       _STM32_PIN(PORTD, 15)
#define HEATER_1_PIN       _STM32_PIN(PORTD, 14)
#define HEATER_BED_PIN     _STM32_PIN(PORTF,  6)

#define FAN_PIN            _STM32_PIN(PORTD, 13)
#define FAN1_PIN           _STM32_PIN(PORTA, 0)
#define FAN2_PIN           _STM32_PIN(PORTA, 1)

//#define E0_AUTO_FAN_PIN  _STM32_PIN(PORTA, 1)

//
// Misc. Functions
//

//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13)  //
//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14)  //
//#define NEOPIXEL_PIN     _STM32_PIN(PORTF, 13)

//
// Prusa i3 MK2 Multi Material Multiplexer Support
//

#define E_MUX0_PIN         _STM32_PIN(PORTG, 3)
#define E_MUX1_PIN         _STM32_PIN(PORTG, 4)

//
// Servos
//

#define SERVO0_PIN         _STM32_PIN(PORTE, 13)
#define SERVO1_PIN         _STM32_PIN(PORTE, 14)


#define SDSS               _STM32_PIN(PORTA, 8)
#define SS_PIN             _STM32_PIN(PORTA, 8)
#define LED_PIN            _STM32_PIN(PORTA, 2)         //Alive
#define PS_ON_PIN          _STM32_PIN(PORTA, 3)
#define KILL_PIN           -1//_STM32_PIN(PORTD, 5)     //EXP2-10
#define PWR_LOSS           _STM32_PIN(PORTG, 5)         //Power loss / nAC_FAULT

//
//MAX7219_DEBUG
//
#define MAX7219_CLK_PIN    _STM32_PIN(PORTG, 10)     //EXP1-1
#define MAX7219_DIN_PIN    _STM32_PIN(PORTD, 7)      //EXP1-3
#define MAX7219_LOAD_PIN   _STM32_PIN(PORTD, 1)     //EXP1-5

//#define NEOPIXEL_PIN    4

//
// LCD / Controller
//
//#define SD_DETECT_PIN      -1 //_STM32_PIN(PORTB, 6))     //EXP2-4
#define BEEPER_PIN         _STM32_PIN(PORTG, 10)        //EXP1-1
#define LCD_PINS_RS        _STM32_PIN(PORTG, 9)         //EXP1-4
#define LCD_PINS_ENABLE    _STM32_PIN(PORTD, 7)         //EXP1-3
#define LCD_PINS_D4        _STM32_PIN(PORTD, 1)         //EXP1-5
#define LCD_PINS_D5        _STM32_PIN(PORTF, 0)         //EXP1-6
#define LCD_PINS_D6        _STM32_PIN(PORTD, 3)         //EXP1-7
#define LCD_PINS_D7        _STM32_PIN(PORTD, 4)         //EXP1-8
#define BTN_EN1            _STM32_PIN(PORTD, 6)         //EXP2-5
#define BTN_EN2            _STM32_PIN(PORTD, 0)         //EXP2-3
#define BTN_ENC            _STM32_PIN(PORTG, 11)        //EXP1-2