muele-marlin/Marlin/src/module/delta.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * delta.h - Delta-specific functions
 */

extern float delta_height,
             delta_endstop_adj[ABC],
             delta_radius,
             delta_diagonal_rod,
             delta_segments_per_second,
             delta_calibration_radius,
             delta_tower_angle_trim[ABC];

extern float delta_tower[ABC][2],
             delta_diagonal_rod_2_tower[ABC],
             delta_clip_start_height;

/**
 * Recalculate factors used for delta kinematics whenever
 * settings have been changed (e.g., by M665).
 */
void recalc_delta_settings();

/**
 * Delta Inverse Kinematics
 *
 * Calculate the tower positions for a given machine
 * position, storing the result in the delta[] array.
 *
 * This is an expensive calculation, requiring 3 square
 * roots per segmented linear move, and strains the limits
 * of a Mega2560 with a Graphical Display.
 *
 * Suggested optimizations include:
 *
 * - Disable the home_offset (M206) and/or position_shift (G92)
 *   features to remove up to 12 float additions.
 *
 * - Use a fast-inverse-sqrt function and add the reciprocal.
 *   (see above)
 */

// Macro to obtain the Z position of an individual tower
#define DELTA_Z(V,T) V[Z_AXIS] + SQRT(    \
  delta_diagonal_rod_2_tower[T] - HYPOT2( \
      delta_tower[T][X_AXIS] - V[X_AXIS], \
      delta_tower[T][Y_AXIS] - V[Y_AXIS]  \
    )                                     \
  )

#define DELTA_IK(V) do {              \
  delta[A_AXIS] = DELTA_Z(V, A_AXIS); \
  delta[B_AXIS] = DELTA_Z(V, B_AXIS); \
  delta[C_AXIS] = DELTA_Z(V, C_AXIS); \
}while(0)

void inverse_kinematics(const float (&raw)[XYZ]);
FORCE_INLINE void inverse_kinematics(const float (&raw)[XYZE]) {
  const float raw_xyz[XYZ] = { raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS] };
  inverse_kinematics(raw_xyz);
}

/**
 * Calculate the highest Z position where the
 * effector has the full range of XY motion.
 */
float delta_safe_distance_from_top();

/**
 * Delta Forward Kinematics
 *
 * See the Wikipedia article "Trilateration"
 * https://en.wikipedia.org/wiki/Trilateration
 *
 * Establish a new coordinate system in the plane of the
 * three carriage points. This system has its origin at
 * tower1, with tower2 on the X axis. Tower3 is in the X-Y
 * plane with a Z component of zero.
 * We will define unit vectors in this coordinate system
 * in our original coordinate system. Then when we calculate
 * the Xnew, Ynew and Znew values, we can translate back into
 * the original system by moving along those unit vectors
 * by the corresponding values.
 *
 * Variable names matched to Marlin, c-version, and avoid the
 * use of any vector library.
 *
 * by Andreas Hardtung 2016-06-07
 * based on a Java function from "Delta Robot Kinematics V3"
 * by Steve Graves
 *
 * The result is stored in the cartes[] array.
 */
void forward_kinematics_DELTA(const float &z1, const float &z2, const float &z3);

FORCE_INLINE void forward_kinematics_DELTA(const float (&point)[ABC]) {
  forward_kinematics_DELTA(point[A_AXIS], point[B_AXIS], point[C_AXIS]);
}

void home_delta();