muele-marlin/Marlin/src/module/endstops.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * endstops.h - manages endstops
 */

#ifndef __ENDSTOPS_H__
#define __ENDSTOPS_H__

#include "../inc/MarlinConfig.h"
#include <stdint.h>

enum EndstopEnum : char {
  X_MIN,
  Y_MIN,
  Z_MIN,
  Z_MIN_PROBE,
  X_MAX,
  Y_MAX,
  Z_MAX,
  X2_MIN,
  X2_MAX,
  Y2_MIN,
  Y2_MAX,
  Z2_MIN,
  Z2_MAX
};

class Endstops {

  public:

    static bool enabled, enabled_globally;

    #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
      typedef uint16_t esbits_t;
      #if ENABLED(X_DUAL_ENDSTOPS)
        static float x_endstop_adj;
      #endif
      #if ENABLED(Y_DUAL_ENDSTOPS)
        static float y_endstop_adj;
      #endif
      #if ENABLED(Z_DUAL_ENDSTOPS)
        static float z_endstop_adj;
      #endif
    #else
      typedef uint8_t esbits_t;
    #endif

  private:
    static esbits_t live_state;
    static volatile uint8_t hit_state;      // Use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT index
    #if ENABLED(ENDSTOP_NOISE_FILTER)
      static esbits_t old_live_state,       // Old endstop value for debouncing and denoising
                      validated_live_state; // The validated (accepted as true) endstop bits
      static uint8_t endstop_poll_count;    // Countdown from threshold for polling
    #endif

  public:
    Endstops() {};

    /**
     * Initialize the endstop pins
     */
    static void init();

    /**
     * A change was detected or presumed to be in endstops pins. Find out what
     * changed, if anything. Called from ISR contexts
     */
    static void check_possible_change();

    /**
     * Periodic call to poll endstops if required. Called from temperature ISR
     */
    static void poll();

    /**
     * Update the endstops bits from the pins
     */
    static void update();

    /**
     * Get Endstop hit state.
     */
    FORCE_INLINE static uint8_t trigger_state() { return hit_state; }

    /**
     * Get current endstops state
     */
    FORCE_INLINE static esbits_t state() { return live_state; }

    /**
     * Print an error message reporting the position when the endstops were last hit.
     */
    static void report_state(); //call from somewhere to create an serial error message with the locations the endstops where hit, in case they were triggered

    /**
     * Report endstop positions in response to M119
     */
    static void M119();

    // Enable / disable endstop checking globally
    static void enable_globally(const bool onoff=true);

    // Enable / disable endstop checking
    static void enable(const bool onoff=true);

    // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
    static void not_homing();

    // Clear endstops (i.e., they were hit intentionally) to suppress the report
    static void hit_on_purpose();

    // Enable / disable endstop z-probe checking
    #if HAS_BED_PROBE
      static volatile bool z_probe_enabled;
      static void enable_z_probe(bool onoff=true);
    #endif

    // Debugging of endstops
    #if ENABLED(PINS_DEBUGGING)
      static bool monitor_flag;
      static void monitor();
      static void run_monitor();
    #endif
};

extern Endstops endstops;

#endif // __ENDSTOPS_H__