muele-marlin/Marlin/src/pins/pins_STM32F4.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#if !defined(STM32F4)
  #error "Oops!  Make sure you have an STM32F4 board selected from the 'Tools -> Boards' menu."
#endif

#define DEFAULT_MACHINE_NAME "STM32F407VET6"
#define BOARD_NAME "STM32F4 Board"

//#define I2C_EEPROM

#define E2END 0xFFF // EEPROM end address (4kB)

// Ignore temp readings during develpment.
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE

#if E_STEPPERS > 2 || HOTENDS > 2
  #error "STM32F4 supports up to 2 hotends / E-steppers."
#endif

//
// Limit Switches
//
#define X_MIN_PIN          PE0
#define X_MAX_PIN          -1
#define Y_MIN_PIN          PE1
#define Y_MAX_PIN          -1
#define Z_MIN_PIN          PE14
#define Z_MAX_PIN          -1

//
// Z Probe (when not Z_MIN_PIN)
//

//#ifndef Z_MIN_PROBE_PIN
//  #define Z_MIN_PROBE_PIN  PA4
//#endif

//
// Steppers
//

#define X_STEP_PIN         PD3
#define X_DIR_PIN          PD2
#define X_ENABLE_PIN       PD0
//#ifndef X_CS_PIN
//  #define X_CS_PIN         PD1
//#endif

#define Y_STEP_PIN         PE11
#define Y_DIR_PIN          PE10
#define Y_ENABLE_PIN       PE13
//#ifndef Y_CS_PIN
//  #define Y_CS_PIN         PE12
//#endif

#define Z_STEP_PIN         PD6
#define Z_DIR_PIN          PD7
#define Z_ENABLE_PIN       PD4
//#ifndef Z_CS_PIN
//  #define Z_CS_PIN         PD5
//#endif

#define E0_STEP_PIN        PB5
#define E0_DIR_PIN         PB6
#define E0_ENABLE_PIN      PB3
//#ifndef E0_CS_PIN
//  #define E0_CS_PIN         PB4
//#endif

#define E1_STEP_PIN        PE4
#define E1_DIR_PIN         PE2
#define E1_ENABLE_PIN      PE3
//#ifndef E1_CS_PIN
//  #define E1_CS_PIN         PE5
//#endif

#define SCK_PIN            PA5
#define MISO_PIN           PA6
#define MOSI_PIN           PA7

//
// Temperature Sensors
//

#define TEMP_0_PIN         PC0   // Analog Input
#define TEMP_1_PIN         PC1   // Analog Input
#define TEMP_BED_PIN       PC2   // Analog Input

//
// Heaters / Fans
//

#define HEATER_0_PIN       PA1
#define HEATER_1_PIN       PA2
#define HEATER_BED_PIN     PA0

#define FAN_PIN            PC6
#define FAN1_PIN           PC7
#define FAN2_PIN           PC8

#define ORIG_E0_AUTO_FAN_PIN  FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN

//
// Misc. Functions
//

//#define CASE_LIGHT_PIN_CI PF13
//#define CASE_LIGHT_PIN_DO PF14
//#define NEOPIXEL_PIN      PF13

//
// Prusa i3 MK2 Multi Material Multiplexer Support
//

//#define E_MUX0_PIN         PG3
//#define E_MUX1_PIN         PG4

//
// Servos
//

//#define SERVO0_PIN         PE13
//#define SERVO1_PIN         PE14


#define SDSS               PE7
#define SS_PIN             PE7
#define LED_PIN            PB7         //Alive
#define PS_ON_PIN          PA10
#define KILL_PIN           PA8
#define PWR_LOSS           PA4         //Power loss / nAC_FAULT

//
// LCD / Controller
//

#define SD_DETECT_PIN      PA15
#define BEEPER_PIN         PC9
#define LCD_PINS_RS        PE9
#define LCD_PINS_ENABLE    PE8
#define LCD_PINS_D4        PB12
#define LCD_PINS_D5        PB13
#define LCD_PINS_D6        PB14
#define LCD_PINS_D7        PB15
#define BTN_EN1            PC4
#define BTN_EN2            PC5
#define BTN_ENC            PC3

//
// Filament runout
//

#define FIL_RUNOUT_PIN     PA3

//
// ST7920 Delays
//
#ifndef ST7920_DELAY_1
  #define ST7920_DELAY_1 DELAY_NS(96)
#endif

#ifndef ST7920_DELAY_2
  #define ST7920_DELAY_2 DELAY_NS(48)
#endif

#ifndef ST7920_DELAY_3
  #define ST7920_DELAY_3 DELAY_NS(715)
#endif