muele-marlin/Marlin/language_fr.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * French
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_FR_H
#define LANGUAGE_FR_H

#define DISPLAY_CHARSET_ISO10646_1

#define WELCOME_MSG                         MACHINE_NAME " prete."
#define MSG_SD_INSERTED                     "Carte inseree"
#define MSG_SD_REMOVED                      "Carte retiree"
#define MSG_LCD_ENDSTOPS                    "Butées" // Max length 8 characters
#define MSG_MAIN                            "Menu principal"
#define MSG_AUTOSTART                       "Demarrage auto"
#define MSG_DISABLE_STEPPERS                "Arreter moteurs"
#define MSG_AUTO_HOME                       "Origine auto."
#define MSG_AUTO_HOME_X                     "Origine X Auto."
#define MSG_AUTO_HOME_Y                     "Origine Y Auto."
#define MSG_AUTO_HOME_Z                     "Origine Z Auto."
#define MSG_LEVEL_BED_HOMING                "Origine XYZ"
#define MSG_LEVEL_BED_WAITING               "Clic pour commencer"
#define MSG_LEVEL_BED_NEXT_POINT            "Point suivant"
#define MSG_LEVEL_BED_DONE                  "Mise a niveau OK!"
#define MSG_LEVEL_BED_CANCEL                "Annuler"
#define MSG_SET_HOME_OFFSETS                "Regl. decal. origine"
#define MSG_HOME_OFFSETS_APPLIED            "Decalages appliques"
#define MSG_SET_ORIGIN                      "Regler origine"
#define MSG_PREHEAT_1                       "Prechauffage PLA"
#define MSG_PREHEAT_1_N                     "Prechauff. PLA "
#define MSG_PREHEAT_1_ALL                   "Prech. PLA Tout"
#define MSG_PREHEAT_1_BEDONLY               "Prech. PLA Plateau"
#define MSG_PREHEAT_1_SETTINGS              "Regl. prech. PLA"
#define MSG_PREHEAT_2                       "Prechauffage ABS"
#define MSG_PREHEAT_2_N                     "Prechauff. ABS "
#define MSG_PREHEAT_2_ALL                   "Prech. ABS Tout"
#define MSG_PREHEAT_2_BEDONLY               "Prech. ABS Plateau"
#define MSG_PREHEAT_2_SETTINGS              "Regl. prech. ABS"
#define MSG_COOLDOWN                        "Refroidir"
#define MSG_SWITCH_PS_ON                    "Allumer alim."
#define MSG_SWITCH_PS_OFF                   "Eteindre alim."
#define MSG_EXTRUDE                         "Extrusion"
#define MSG_RETRACT                         "Retraction"
#define MSG_MOVE_AXIS                       "Deplacer un axe"
#define MSG_LEVEL_BED                       "Regl. Niv. Plateau"
#define MSG_MOVE_X                          "Depl. X"
#define MSG_MOVE_Y                          "Depl. Y"
#define MSG_MOVE_Z                          "Depl. Z"
#define MSG_MOVE_E                          "Extruder"
#define MSG_MOVE_01MM                       "Depl. 0.1mm"
#define MSG_MOVE_1MM                        "Depl. 1mm"
#define MSG_MOVE_10MM                       "Depl. 10mm"
#define MSG_SPEED                           " Vitesse"
#define MSG_BED_Z                           "Plateau Z"
#define MSG_NOZZLE                          "Buse"
#define MSG_BED                             "Plateau"
#define MSG_FAN_SPEED                       "Vitesse ventil."
#define MSG_FLOW                            "Flux"
#define MSG_CONTROL                         "Controler"
#define MSG_MIN                             LCD_STR_THERMOMETER " Min"
#define MSG_MAX                             LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR                          LCD_STR_THERMOMETER " Facteur"
#define MSG_AUTOTEMP                        "Temp. Auto."
#define MSG_ON                              "Marche "
#define MSG_OFF                             "Arret"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_PID_C                           "PID-C"
#define MSG_SELECT                          "Selectionner"
#define MSG_ACC                             "Acceleration"
#define MSG_VX_JERK                         "Vx-jerk"
#define MSG_VY_JERK                         "Vy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ve-jerk"
#define MSG_VMAX                            "Vmax"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "Vdepl min"
#define MSG_AMAX                            "Amax "
#define MSG_A_RETRACT                       "A-retract"
#define MSG_A_TRAVEL                        "A-Depl."
#define MSG_XSTEPS                          "Xpas/mm"
#define MSG_YSTEPS                          "Ypas/mm"
#define MSG_ZSTEPS                          "Zpas/mm"
#define MSG_ESTEPS                          "Epas/mm"
#define MSG_TEMPERATURE                     "Temperature"
#define MSG_MOTION                          "Mouvement"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E en mm3"
#define MSG_FILAMENT_DIAM                   "Diam. Fil."
#define MSG_CONTRAST                        "Contraste LCD"
#define MSG_STORE_EPROM                     "Sauver config"
#define MSG_LOAD_EPROM                      "Lire config"
#define MSG_RESTORE_FAILSAFE                "Restaurer defauts"
#define MSG_REFRESH                         "Actualiser"
#define MSG_WATCH                           "Surveiller"
#define MSG_PREPARE                         "Preparer"
#define MSG_TUNE                            "Regler"
#define MSG_PAUSE_PRINT                     "Interrompre impr."
#define MSG_RESUME_PRINT                    "Reprendre impr."
#define MSG_STOP_PRINT                      "Arreter impr."
#define MSG_CARD_MENU                       "Impr. depuis SD"
#define MSG_NO_CARD                         "Pas de carte"
#define MSG_DWELL                           "Repos..."
#define MSG_USERWAIT                        "Atten. de l'util."
#define MSG_RESUMING                        "Repri. de l'impr."
#define MSG_PRINT_ABORTED                   "Impr. Annulee"
#define MSG_NO_MOVE                         "Moteurs bloques."
#define MSG_KILLED                          "MORT."
#define MSG_STOPPED                         "STOPPE."
#define MSG_CONTROL_RETRACT                 "Retraction mm"
#define MSG_CONTROL_RETRACT_SWAP            "Ech. Retr. mm"
#define MSG_CONTROL_RETRACTF                "Retraction V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Ech. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet V"
#define MSG_AUTORETRACT                     "Retract. Auto."
#define MSG_FILAMENTCHANGE                  "Changer filament"
#define MSG_INIT_SDCARD                     "Init. la carte SD"
#define MSG_CNG_SDCARD                      "Changer de carte"
#define MSG_ZPROBE_OUT                      "Z sonde exte. lit"
#define MSG_BLTOUCH_SELFTEST                "Autotest BLTouch"
#define MSG_BLTOUCH_RESET                   "RaZ BLTouch"
#define MSG_HOME                            "Origine"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST                           "Premier"
#define MSG_ZPROBE_ZOFFSET                  "Decalage Z"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "Butee abandon"
#define MSG_HEATING_FAILED_LCD              "Erreur de chauffe"
#define MSG_ERR_REDUNDANT_TEMP              "Err: TEMP. REDONDANT"
#define MSG_THERMAL_RUNAWAY                 "EMBALLEMENT THERM."
#define MSG_ERR_MAXTEMP                     "Err: TEMP. MAX"
#define MSG_ERR_MINTEMP                     "Err: TEMP. MIN"
#define MSG_ERR_MAXTEMP_BED                 "Err: TEMP. MAX LIT"
#define MSG_ERR_MINTEMP_BED                 "Err: TEMP. MIN LIT"
#define MSG_ERR_Z_HOMING                    "G28 Z interdit"

#define MSG_HALTED                          "IMPR. STOPPEE"
#define MSG_PLEASE_RESET                    "RaZ. SVP"
#define MSG_SHORT_DAY                       "j" // One character only
#define MSG_SHORT_HOUR                      "h" // One character only
#define MSG_SHORT_MINUTE                    "m" // One character only

#define MSG_HEATING                         "En chauffe..."
#define MSG_HEATING_COMPLETE                "Chauffe terminee"
#define MSG_BED_HEATING                     "Plateau en chauffe.."
#define MSG_BED_DONE                        "Chauffe lit terminee"
#define MSG_DELTA_CALIBRATE                 "Calibration Delta"
#define MSG_DELTA_CALIBRATE_X               "Calibrer X"
#define MSG_DELTA_CALIBRATE_Y               "Calibrer Y"
#define MSG_DELTA_CALIBRATE_Z               "Calibrer Z"
#define MSG_DELTA_CALIBRATE_CENTER          "Calibrer centre"

#define MSG_INFO_MENU                       "Infos imprimante"
#define MSG_INFO_PRINTER_MENU               "Infos imprimante"
#define MSG_INFO_STATS_MENU                 "Stats. imprimante"
#define MSG_INFO_BOARD_MENU                 "Infos carte"
#define MSG_INFO_THERMISTOR_MENU            "Thermistors"
#define MSG_INFO_EXTRUDERS                  "Extruders"
#define MSG_INFO_BAUDRATE                   "Baud"
#define MSG_INFO_PROTOCOL                   "Protocole"

#if LCD_WIDTH >= 20
  #define MSG_INFO_PRINT_COUNT              "Nbre impressions"
  #define MSG_INFO_COMPLETED_PRINTS         "Terminees"
  #define MSG_INFO_PRINT_TIME               "Tps impr. total"
  #define MSG_INFO_PRINT_LONGEST            "Impr. la + longue"
  #define MSG_INFO_PRINT_FILAMENT           "Total filament"
#else
  #define MSG_INFO_PRINT_COUNT              "Impressions"
  #define MSG_INFO_COMPLETED_PRINTS         "Terminees"
  #define MSG_INFO_PRINT_TIME               "Total"
  #define MSG_INFO_PRINT_LONGEST            "+ long"
  #define MSG_INFO_PRINT_FILAMENT           "Filament"
#endif

#define MSG_INFO_MIN_TEMP                   "Temp Min"
#define MSG_INFO_MAX_TEMP                   "Temp Max"
#define MSG_INFO_PSU                        "Alimentation"
#define MSG_DRIVE_STRENGTH                  "Puiss. moteur "
#define MSG_DAC_PERCENT                     "Driver %"
#define MSG_DAC_EEPROM_WRITE                "DAC EEPROM sauv."
#define MSG_FILAMENT_CHANGE_HEADER          "CHANGER FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CHANGER OPTIONS:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "+ extrusion"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Reprendre impr."

#if LCD_HEIGHT >= 4
    #define MSG_FILAMENT_CHANGE_INIT_1          "Attente Demarrage"
    #define MSG_FILAMENT_CHANGE_INIT_2          "du filament"
    #define MSG_FILAMENT_CHANGE_INIT_3          "changer"
    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "attente de"
    #define MSG_FILAMENT_CHANGE_UNLOAD_2        "decharger filament"
    #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""
    #define MSG_FILAMENT_CHANGE_INSERT_1        "inserer filament"
    #define MSG_FILAMENT_CHANGE_INSERT_2        "et app. bouton"
    #define MSG_FILAMENT_CHANGE_INSERT_3        "pour continuer..."
    #define MSG_FILAMENT_CHANGE_LOAD_1          "attente de"
    #define MSG_FILAMENT_CHANGE_LOAD_2          "charger filament"
    #define MSG_FILAMENT_CHANGE_LOAD_3          ""
    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "attente de"
    #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion fil."
    #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""
    #define MSG_FILAMENT_CHANGE_RESUME_1        "attente impression"
    #define MSG_FILAMENT_CHANGE_RESUME_2        "pour reprendre"
    #define MSG_FILAMENT_CHANGE_RESUME_3        ""
#else // LCD_HEIGHT < 4
    #define MSG_FILAMENT_CHANGE_INIT_1          "Patientez..."
    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejection..."
    #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserer et click"
    #define MSG_FILAMENT_CHANGE_LOAD_1          "Chargement..."
    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extrusion..."
    #define MSG_FILAMENT_CHANGE_RESUME_1        "Reprise..."
#endif // LCD_HEIGHT < 4

#endif // LANGUAGE_FR_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 06:19:46 +00:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`/**`
			`* French`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 2016-03-22 10:58:41 +00:00			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`*`
			`*/`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#ifndef LANGUAGE_FR_H`
			`#define LANGUAGE_FR_H`

Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 2015-03-13 13:26:58 +00:00			`#define DISPLAY_CHARSET_ISO10646_1`

Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define WELCOME_MSG MACHINE_NAME " prete."`
			`#define MSG_SD_INSERTED "Carte inseree"`
			`#define MSG_SD_REMOVED "Carte retiree"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_LCD_ENDSTOPS "Butées" // Max length 8 characters`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_MAIN "Menu principal"`
			`#define MSG_AUTOSTART "Demarrage auto"`
			`#define MSG_DISABLE_STEPPERS "Arreter moteurs"`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_AUTO_HOME "Origine auto."`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_AUTO_HOME_X "Origine X Auto."`
			`#define MSG_AUTO_HOME_Y "Origine Y Auto."`
			`#define MSG_AUTO_HOME_Z "Origine Z Auto."`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_LEVEL_BED_HOMING "Origine XYZ"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_LEVEL_BED_WAITING "Clic pour commencer"`
			`#define MSG_LEVEL_BED_NEXT_POINT "Point suivant"`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_LEVEL_BED_DONE "Mise a niveau OK!"`
			`#define MSG_LEVEL_BED_CANCEL "Annuler"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_SET_HOME_OFFSETS "Regl. decal. origine"`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_HOME_OFFSETS_APPLIED "Decalages appliques"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_SET_ORIGIN "Regler origine"`
Replace PLA/ABS preheating with generic 2016-07-09 22:20:12 +00:00			`#define MSG_PREHEAT_1 "Prechauffage PLA"`
			`#define MSG_PREHEAT_1_N "Prechauff. PLA "`
			`#define MSG_PREHEAT_1_ALL "Prech. PLA Tout"`
			`#define MSG_PREHEAT_1_BEDONLY "Prech. PLA Plateau"`
			`#define MSG_PREHEAT_1_SETTINGS "Regl. prech. PLA"`
			`#define MSG_PREHEAT_2 "Prechauffage ABS"`
			`#define MSG_PREHEAT_2_N "Prechauff. ABS "`
			`#define MSG_PREHEAT_2_ALL "Prech. ABS Tout"`
			`#define MSG_PREHEAT_2_BEDONLY "Prech. ABS Plateau"`
			`#define MSG_PREHEAT_2_SETTINGS "Regl. prech. ABS"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_COOLDOWN "Refroidir"`
			`#define MSG_SWITCH_PS_ON "Allumer alim."`
			`#define MSG_SWITCH_PS_OFF "Eteindre alim."`
			`#define MSG_EXTRUDE "Extrusion"`
			`#define MSG_RETRACT "Retraction"`
			`#define MSG_MOVE_AXIS "Deplacer un axe"`
Cleanup for language files ・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2) ・Remove duplicated strings ・Arrange the strings in unified order ・Adjust spacing ・Remove some comments in Japanese files(follow-up the PR #3560) The most part of these changes were salvaged from closed my PR#3550. 2016-04-23 04:27:05 +00:00			`#define MSG_LEVEL_BED "Regl. Niv. Plateau"`
Correction traductions 2015-05-10 13:22:40 +00:00			`#define MSG_MOVE_X "Depl. X"`
			`#define MSG_MOVE_Y "Depl. Y"`
			`#define MSG_MOVE_Z "Depl. Z"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_MOVE_E "Extruder"`
Correction traductions 2015-05-10 13:22:40 +00:00			`#define MSG_MOVE_01MM "Depl. 0.1mm"`
			`#define MSG_MOVE_1MM "Depl. 1mm"`
			`#define MSG_MOVE_10MM "Depl. 10mm"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_SPEED " Vitesse"`
Cleanup for language files ・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2) ・Remove duplicated strings ・Arrange the strings in unified order ・Adjust spacing ・Remove some comments in Japanese files(follow-up the PR #3560) The most part of these changes were salvaged from closed my PR#3550. 2016-04-23 04:27:05 +00:00			`#define MSG_BED_Z "Plateau Z"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_NOZZLE "Buse"`
			`#define MSG_BED "Plateau"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_FAN_SPEED "Vitesse ventil."`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_FLOW "Flux"`
			`#define MSG_CONTROL "Controler"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_MIN LCD_STR_THERMOMETER " Min"`
			`#define MSG_MAX LCD_STR_THERMOMETER " Max"`
			`#define MSG_FACTOR LCD_STR_THERMOMETER " Facteur"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_AUTOTEMP "Temp. Auto."`
			`#define MSG_ON "Marche "`
			`#define MSG_OFF "Arret"`
			`#define MSG_PID_P "PID-P"`
			`#define MSG_PID_I "PID-I"`
			`#define MSG_PID_D "PID-D"`
			`#define MSG_PID_C "PID-C"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_SELECT "Selectionner"`
			`#define MSG_ACC "Acceleration"`
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 09:37:13 +00:00			`#define MSG_VX_JERK "Vx-jerk"`
			`#define MSG_VY_JERK "Vy-jerk"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_VZ_JERK "Vz-jerk"`
			`#define MSG_VE_JERK "Ve-jerk"`
			`#define MSG_VMAX "Vmax"`
			`#define MSG_VMIN "Vmin"`
			`#define MSG_VTRAV_MIN "Vdepl min"`
			`#define MSG_AMAX "Amax "`
			`#define MSG_A_RETRACT "A-retract"`
Cleanup for language files ・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2) ・Remove duplicated strings ・Arrange the strings in unified order ・Adjust spacing ・Remove some comments in Japanese files(follow-up the PR #3560) The most part of these changes were salvaged from closed my PR#3550. 2016-04-23 04:27:05 +00:00			`#define MSG_A_TRAVEL "A-Depl."`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_XSTEPS "Xpas/mm"`
			`#define MSG_YSTEPS "Ypas/mm"`
			`#define MSG_ZSTEPS "Zpas/mm"`
			`#define MSG_ESTEPS "Epas/mm"`
			`#define MSG_TEMPERATURE "Temperature"`
			`#define MSG_MOTION "Mouvement"`
Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 22:28:05 +00:00			`#define MSG_VOLUMETRIC "Filament"`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_VOLUMETRIC_ENABLED "E en mm3"`
			`#define MSG_FILAMENT_DIAM "Diam. Fil."`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_CONTRAST "Contraste LCD"`
			`#define MSG_STORE_EPROM "Sauver config"`
			`#define MSG_LOAD_EPROM "Lire config"`
			`#define MSG_RESTORE_FAILSAFE "Restaurer defauts"`
			`#define MSG_REFRESH "Actualiser"`
			`#define MSG_WATCH "Surveiller"`
			`#define MSG_PREPARE "Preparer"`
			`#define MSG_TUNE "Regler"`
			`#define MSG_PAUSE_PRINT "Interrompre impr."`
			`#define MSG_RESUME_PRINT "Reprendre impr."`
			`#define MSG_STOP_PRINT "Arreter impr."`
			`#define MSG_CARD_MENU "Impr. depuis SD"`
			`#define MSG_NO_CARD "Pas de carte"`
			`#define MSG_DWELL "Repos..."`
			`#define MSG_USERWAIT "Atten. de l'util."`
			`#define MSG_RESUMING "Repri. de l'impr."`
Correction traductions 2015-05-10 13:22:40 +00:00			`#define MSG_PRINT_ABORTED "Impr. Annulee"`
Updated french translation 2016-10-15 15:52:22 +00:00			`#define MSG_NO_MOVE "Moteurs bloques."`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_KILLED "MORT."`
			`#define MSG_STOPPED "STOPPE."`
			`#define MSG_CONTROL_RETRACT "Retraction mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"`
			`#define MSG_CONTROL_RETRACTF "Retraction V"`
			`#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"`
			`#define MSG_AUTORETRACT "Retract. Auto."`
			`#define MSG_FILAMENTCHANGE "Changer filament"`
			`#define MSG_INIT_SDCARD "Init. la carte SD"`
			`#define MSG_CNG_SDCARD "Changer de carte"`
			`#define MSG_ZPROBE_OUT "Z sonde exte. lit"`
Updated french translation 2016-10-15 15:52:22 +00:00			`#define MSG_BLTOUCH_SELFTEST "Autotest BLTouch"`
			`#define MSG_BLTOUCH_RESET "RaZ BLTouch"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_HOME "Origine" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST`
			`#define MSG_FIRST "Premier"`
Some omitted french translation 2016-04-05 10:04:29 +00:00			`#define MSG_ZPROBE_ZOFFSET "Decalage Z"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`#define MSG_BABYSTEP_X "Babystep X"`
			`#define MSG_BABYSTEP_Y "Babystep Y"`
			`#define MSG_BABYSTEP_Z "Babystep Z"`
			`#define MSG_ENDSTOP_ABORT "Butee abandon"`
French translation 2016-04-04 14:45:06 +00:00			`#define MSG_HEATING_FAILED_LCD "Erreur de chauffe"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_ERR_REDUNDANT_TEMP "Err: TEMP. REDONDANT"`
			`#define MSG_THERMAL_RUNAWAY "EMBALLEMENT THERM."`
French translation 2016-04-04 14:45:06 +00:00			`#define MSG_ERR_MAXTEMP "Err: TEMP. MAX"`
			`#define MSG_ERR_MINTEMP "Err: TEMP. MIN"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_ERR_MAXTEMP_BED "Err: TEMP. MAX LIT"`
			`#define MSG_ERR_MINTEMP_BED "Err: TEMP. MIN LIT"`
Updated french translation 2016-10-15 15:52:22 +00:00			`#define MSG_ERR_Z_HOMING "G28 Z interdit"`
Update french language 2016-08-20 20:43:31 +00:00
			`#define MSG_HALTED "IMPR. STOPPEE"`
			`#define MSG_PLEASE_RESET "RaZ. SVP"`
			`#define MSG_SHORT_DAY "j" // One character only`
			`#define MSG_SHORT_HOUR "h" // One character only`
			`#define MSG_SHORT_MINUTE "m" // One character only`

French translation 2016-04-04 14:45:06 +00:00			`#define MSG_HEATING "En chauffe..."`
			`#define MSG_HEATING_COMPLETE "Chauffe terminee"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_BED_HEATING "Plateau en chauffe.."`
			`#define MSG_BED_DONE "Chauffe lit terminee"`
General language file cleanup 2016-04-12 02:42:09 +00:00			`#define MSG_DELTA_CALIBRATE "Calibration Delta"`
			`#define MSG_DELTA_CALIBRATE_X "Calibrer X"`
			`#define MSG_DELTA_CALIBRATE_Y "Calibrer Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Calibrer Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "Calibrer centre"`
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h 2014-12-29 17:13:00 +00:00
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_INFO_MENU "Infos imprimante"`
			`#define MSG_INFO_PRINTER_MENU "Infos imprimante"`
			`#define MSG_INFO_STATS_MENU "Stats. imprimante"`
			`#define MSG_INFO_BOARD_MENU "Infos carte"`
			`#define MSG_INFO_THERMISTOR_MENU "Thermistors"`
			`#define MSG_INFO_EXTRUDERS "Extruders"`
			`#define MSG_INFO_BAUDRATE "Baud"`
			`#define MSG_INFO_PROTOCOL "Protocole"`

Patch up some language formatting 2016-11-18 04:17:14 +00:00			`#if LCD_WIDTH >= 20`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_INFO_PRINT_COUNT "Nbre impressions"`
			`#define MSG_INFO_COMPLETED_PRINTS "Terminees"`
Fix for the PR #5066 (Updated french translation) MSG_INFO_PRINT_TIME is still being used 2016-10-22 21:09:56 +00:00			`#define MSG_INFO_PRINT_TIME "Tps impr. total"`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_INFO_PRINT_LONGEST "Impr. la + longue"`
			`#define MSG_INFO_PRINT_FILAMENT "Total filament"`
			`#else`
Fix for the PR #5066 (Updated french translation) MSG_INFO_PRINT_TIME is still being used 2016-10-22 21:09:56 +00:00			`#define MSG_INFO_PRINT_COUNT "Impressions"`
			`#define MSG_INFO_COMPLETED_PRINTS "Terminees"`
			`#define MSG_INFO_PRINT_TIME "Total"`
			`#define MSG_INFO_PRINT_LONGEST "+ long"`
			`#define MSG_INFO_PRINT_FILAMENT "Filament"`
Update french language 2016-08-20 20:43:31 +00:00			`#endif`

			`#define MSG_INFO_MIN_TEMP "Temp Min"`
			`#define MSG_INFO_MAX_TEMP "Temp Max"`
			`#define MSG_INFO_PSU "Alimentation"`
Updated french translation 2016-10-15 15:52:22 +00:00			`#define MSG_DRIVE_STRENGTH "Puiss. moteur "`
			`#define MSG_DAC_PERCENT "Driver %"`
			`#define MSG_DAC_EEPROM_WRITE "DAC EEPROM sauv."`
Update french language 2016-08-20 20:43:31 +00:00			`#define MSG_FILAMENT_CHANGE_HEADER "CHANGER FILAMENT"`
			`#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGER OPTIONS:"`
			`#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "+ extrusion"`
			`#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Reprendre impr."`

			`#if LCD_HEIGHT >= 4`
			`#define MSG_FILAMENT_CHANGE_INIT_1 "Attente Demarrage"`
			`#define MSG_FILAMENT_CHANGE_INIT_2 "du filament"`
			`#define MSG_FILAMENT_CHANGE_INIT_3 "changer"`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 "attente de"`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_2 "decharger filament"`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_3 ""`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 "inserer filament"`
			`#define MSG_FILAMENT_CHANGE_INSERT_2 "et app. bouton"`
			`#define MSG_FILAMENT_CHANGE_INSERT_3 "pour continuer..."`
			`#define MSG_FILAMENT_CHANGE_LOAD_1 "attente de"`
			`#define MSG_FILAMENT_CHANGE_LOAD_2 "charger filament"`
			`#define MSG_FILAMENT_CHANGE_LOAD_3 ""`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "attente de"`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrusion fil."`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""`
			`#define MSG_FILAMENT_CHANGE_RESUME_1 "attente impression"`
			`#define MSG_FILAMENT_CHANGE_RESUME_2 "pour reprendre"`
			`#define MSG_FILAMENT_CHANGE_RESUME_3 ""`
			`#else // LCD_HEIGHT < 4`
			`#define MSG_FILAMENT_CHANGE_INIT_1 "Patientez..."`
			`#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejection..."`
			`#define MSG_FILAMENT_CHANGE_INSERT_1 "Inserer et click"`
			`#define MSG_FILAMENT_CHANGE_LOAD_1 "Chargement..."`
			`#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrusion..."`
			`#define MSG_FILAMENT_CHANGE_RESUME_1 "Reprise..."`
			`#endif // LCD_HEIGHT < 4`

Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#endif // LANGUAGE_FR_H`