muele-marlin/Marlin/src/gcode/geometry/G53-G59.cpp

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#include "../gcode.h"
#include "../../module/motion.h"

#if ENABLED(CNC_COORDINATE_SYSTEMS)

#include "../../module/stepper.h"

/**
 * Select a coordinate system and update the workspace offset.
 * System index -1 is used to specify machine-native.
 */
bool GcodeSuite::select_coordinate_system(const int8_t _new) {
  if (active_coordinate_system == _new) return false;
  planner.synchronize();
  float old_offset[XYZ] = { 0 }, new_offset[XYZ] = { 0 };
  if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1))
    COPY(old_offset, coordinate_system[active_coordinate_system]);
  if (WITHIN(_new, 0, MAX_COORDINATE_SYSTEMS - 1))
    COPY(new_offset, coordinate_system[_new]);
  active_coordinate_system = _new;
  LOOP_XYZ(i) {
    const float diff = new_offset[i] - old_offset[i];
    if (diff) {
      position_shift[i] += diff;
      update_workspace_offset((AxisEnum)i);
    }
  }
  return true;
}

/**
 * G53: Apply native workspace to the current move
 *
 * In CNC G-code G53 is a modifier.
 * It precedes a movement command (or other modifiers) on the same line.
 * This is the first command to use parser.chain() to make this possible.
 *
 * Marlin also uses G53 on a line by itself to go back to native space.
 */
inline void GcodeSuite::G53() {
  const int8_t _system = active_coordinate_system;
  active_coordinate_system = -1;
  if (parser.chain()) { // If this command has more following...
    process_parsed_command();
    active_coordinate_system = _system;
  }
}

/**
 * G54-G59.3: Select a new workspace
 *
 * A workspace is an XYZ offset to the machine native space.
 * All workspaces default to 0,0,0 at start, or with EEPROM
 * support they may be restored from a previous session.
 *
 * G92 is used to set the current workspace's offset.
 */
void G54_59(uint8_t subcode=0) {
  const int8_t _space = parser.codenum - 54 + subcode;
  if (gcode.select_coordinate_system(_space)) {
    SERIAL_PROTOCOLLNPAIR("Select workspace ", _space);
    report_current_position();
  }
}
void GcodeSuite::G54() { G54_59(); }
void GcodeSuite::G55() { G54_59(); }
void GcodeSuite::G56() { G54_59(); }
void GcodeSuite::G57() { G54_59(); }
void GcodeSuite::G58() { G54_59(); }
void GcodeSuite::G59() { G54_59(parser.subcode); }

#endif // CNC_COORDINATE_SYSTEMS