muele-marlin/Marlin/thermistortables.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef THERMISTORTABLES_H_
#define THERMISTORTABLES_H_

#include "Marlin.h"
#include "macros.h"

#define OVERSAMPLENR 16

#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORBED == n)

// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },

#if ANY_THERMISTOR_IS(1) // 100k bed thermistor
  #include "thermistortable_1.h"
#endif
#if ANY_THERMISTOR_IS(2) // 200k bed thermistor
  #include "thermistortable_2.h"
#endif
#if ANY_THERMISTOR_IS(3) // mendel-parts
  #include "thermistortable_3.h"
#endif
#if ANY_THERMISTOR_IS(4) // 10k thermistor
  #include "thermistortable_4.h"
#endif
#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)
  #include "thermistortable_5.h"
#endif
#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor
  #include "thermistortable_6.h"
#endif
#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01
  #include "thermistortable_7.h"
#endif
#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01
  #include "thermistortable_71.h"
#endif
#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  #include "thermistortable_8.h"
#endif
#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  #include "thermistortable_9.h"
#endif
#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup)
  #include "thermistortable_10.h"
#endif
#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor
  #include "thermistortable_11.h"
#endif
#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%
  #include "thermistortable_13.h"
#endif
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
  #include "thermistortable_20.h"
#endif
#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_51.h"
#endif
#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_52.h"
#endif
#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
  #include "thermistortable_53.h"
#endif
#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor
  #include "thermistortable_60.h"
#endif
#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor
  #include "thermistortable_66.h"
#endif
#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  #include "thermistortable_12.h"
#endif
#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor
  #include "thermistortable_70.h"
#endif
#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor
  #include "thermistortable_75.h"
#endif
#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
  #include "thermistortable_110.h"
#endif
#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
  #include "thermistortable_147.h"
#endif
#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
  #include "thermistortable_1010.h"
#endif
#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
  #include "thermistortable_1047.h"
#endif
#if ANY_THERMISTOR_IS(998) // User-defined table 1
  #include "thermistortable_998.h"
#endif
#if ANY_THERMISTOR_IS(999) // User-defined table 2
  #include "thermistortable_999.h"
#endif

#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)

#ifdef THERMISTORHEATER_0
  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
  #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#elif defined(HEATER_0_USES_THERMISTOR)
  #error "No heater 0 thermistor table specified"
#else
  #define HEATER_0_TEMPTABLE NULL
  #define HEATER_0_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_1
  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
  #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#elif defined(HEATER_1_USES_THERMISTOR)
  #error "No heater 1 thermistor table specified"
#else
  #define HEATER_1_TEMPTABLE NULL
  #define HEATER_1_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_2
  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
  #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#elif defined(HEATER_2_USES_THERMISTOR)
  #error "No heater 2 thermistor table specified"
#else
  #define HEATER_2_TEMPTABLE NULL
  #define HEATER_2_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_3
  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
  #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
#elif defined(HEATER_3_USES_THERMISTOR)
  #error "No heater 3 thermistor table specified"
#else
  #define HEATER_3_TEMPTABLE NULL
  #define HEATER_3_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORBED
  #define BEDTEMPTABLE TT_NAME(THERMISTORBED)
  #define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
  #ifdef BED_USES_THERMISTOR
    #error "No bed thermistor table specified"
  #endif
#endif

// Set the high and low raw values for the heaters
// For thermistors the highest temperature results in the lowest ADC value
// For thermocouples the highest temperature results in the highest ADC value
#ifndef HEATER_0_RAW_HI_TEMP
  #ifdef HEATER_0_USES_THERMISTOR
    #define HEATER_0_RAW_HI_TEMP 0
    #define HEATER_0_RAW_LO_TEMP 16383
  #else
    #define HEATER_0_RAW_HI_TEMP 16383
    #define HEATER_0_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_1_RAW_HI_TEMP
  #ifdef HEATER_1_USES_THERMISTOR
    #define HEATER_1_RAW_HI_TEMP 0
    #define HEATER_1_RAW_LO_TEMP 16383
  #else
    #define HEATER_1_RAW_HI_TEMP 16383
    #define HEATER_1_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_2_RAW_HI_TEMP
  #ifdef HEATER_2_USES_THERMISTOR
    #define HEATER_2_RAW_HI_TEMP 0
    #define HEATER_2_RAW_LO_TEMP 16383
  #else
    #define HEATER_2_RAW_HI_TEMP 16383
    #define HEATER_2_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_3_RAW_HI_TEMP
  #ifdef HEATER_3_USES_THERMISTOR
    #define HEATER_3_RAW_HI_TEMP 0
    #define HEATER_3_RAW_LO_TEMP 16383
  #else
    #define HEATER_3_RAW_HI_TEMP 16383
    #define HEATER_3_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_BED_RAW_HI_TEMP
  #ifdef BED_USES_THERMISTOR
    #define HEATER_BED_RAW_HI_TEMP 0
    #define HEATER_BED_RAW_LO_TEMP 16383
  #else
    #define HEATER_BED_RAW_HI_TEMP 16383
    #define HEATER_BED_RAW_LO_TEMP 0
  #endif
#endif

#endif // THERMISTORTABLES_H_
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 06:19:46 +00:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

first commit 2011-08-12 20:28:35 +00:00			`#ifndef THERMISTORTABLES_H_`
			`#define THERMISTORTABLES_H_`

simplified the includes, makefile now works with arduino23 2011-12-22 13:55:45 +00:00			`#include "Marlin.h"`
Add COUNT macro and apply 2015-07-22 22:50:20 +00:00			`#include "macros.h"`
and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h 2011-11-15 21:50:43 +00:00
Merged Marlin, Marlin non gen6 and Ultimaker changes 2011-11-04 17:02:56 +00:00			`#define OVERSAMPLENR 16`
first commit 2011-08-12 20:28:35 +00:00
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n \|\| THERMISTORHEATER_1 == n \|\| THERMISTORHEATER_2 == n \|\| THERMISTORHEATER_3 == n \|\| THERMISTORBED == n)`

Split up thermistor tables 2016-12-19 22:27:39 +00:00			`// Pt1000 and Pt100 handling`
			`//`
			`// Rt=R0(1+aT+bTT) [for T>0]`
			`// a=3.9083E-3, b=-5.775E-7`
			`#define PtA 3.9083E-3`
			`#define PtB -5.775E-7`
			`#define PtRt(T,R0) ((R0)(1.0+(PtA)(T)+(PtB)(T)(T)))`
			`#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))`
			`#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },`

Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(1) // 100k bed thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_1.h"`
first commit 2011-08-12 20:28:35 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(2) // 200k bed thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_2.h"`
first commit 2011-08-12 20:28:35 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(3) // mendel-parts`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_3.h"`
first commit 2011-08-12 20:28:35 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(4) // 10k thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_4.h"`
Added thermistor tables 2011-11-04 21:51:14 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_5.h"`
Added thermistor tables 2011-11-04 21:51:14 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_6.h"`
Added thermistor tables 2011-11-04 21:51:14 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_7.h"`
Added thermistor tables 2011-11-04 21:51:14 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_71.h"`
Added Honeywell thermistor 135-104LAF-J01 2013-07-30 12:01:41 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)`
			`#include "thermistortable_8.h"`
add RepRapPro Huxley thermistor tables 2012-12-30 11:09:38 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)`
			`#include "thermistortable_9.h"`
add RepRapPro Huxley thermistor tables 2012-12-30 11:09:38 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup)`
			`#include "thermistortable_10.h"`
add RepRapPro Huxley thermistor tables 2012-12-30 11:09:38 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor`
			`#include "thermistortable_11.h"`
This table is made for thermistor 3950 (can be found on ebay for cheap) it's caracteristics are : R25℃ ;100KΩ±1% B Value(R25/50℃)：3990K 1% Dissipation Factor(mW/℃)：1.1~1.6 In still Air Thermal Time Constant(S)：10~17 In Still Air Operating temperature range： (-50~+260°C) Dimension： 1.8mm Dia X4.1mm Lead Length ：30mm This table was found on the following blogs: http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/ and http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin 2014-04-13 15:03:20 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1%`
			`#include "thermistortable_13.h"`
Update thermistortables.h Add another thermistor table,use with hotend "Simple ONE" & "All in ONE" 2014-09-26 19:49:07 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_20.h"`
Add 4th extruder 2015-01-23 22:13:06 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
			`#include "thermistortable_51.h"`
Update Marlin/thermistortables.h 2012-05-19 11:52:12 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
			`#include "thermistortable_52.h"`
Update Marlin/thermistortables.h 2012-05-20 10:35:28 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)`
			`#include "thermistortable_53.h"`
Update Marlin/thermistortables.h 2012-05-20 19:18:45 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_60.h"`
Adding Maker's Tool Works heated bed thermistor 2013-03-19 03:53:37 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor`
			`#include "thermistortable_66.h"`
Dyze High Temp Thermistor Support 2016-07-09 02:28:37 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)`
			`#include "thermistortable_12.h"`
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 2014-04-24 08:49:42 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_70.h"`
Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor. 2016-02-27 19:17:07 +00:00			`#endif`
Add Thermistor 75: MGB18 silicon pad 2017-03-18 15:17:44 +00:00			`#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor`
			`#include "thermistortable_75.h"`
			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_110.h"`
Pt100 and Pt1000 temperature sensors handling 2014-02-14 11:15:31 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_147.h"`
Pt100 and Pt1000 temperature sensors handling 2014-02-14 11:15:31 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_1010.h"`
Pt100 and Pt1000 temperature sensors handling 2014-02-14 11:15:31 +00:00			`#endif`
Simpler/extensible thermistor test in thermistortables.h 2016-07-09 02:54:45 +00:00			`#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#include "thermistortable_1047.h"`
Pt100 and Pt1000 temperature sensors handling 2014-02-14 11:15:31 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(998) // User-defined table 1`
			`#include "thermistortable_998.h"`
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes. 2015-02-22 14:02:04 +00:00			`#endif`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#if ANY_THERMISTOR_IS(999) // User-defined table 2`
			`#include "thermistortable_999.h"`
Extend the idea of dummy temperature sensors. Added a second sensor and made them configurable. 2015-02-24 10:02:16 +00:00			`#endif`
Dummy Thermistor Table for testing purposes Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes. 2015-02-22 14:02:04 +00:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 2011-12-06 04:33:33 +00:00			`#define _TT_NAME(_N) temptable_ ## _N`
			`#define TT_NAME(_N) _TT_NAME(_N)`
Added thermistor tables 2011-11-04 21:51:14 +00:00
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 2011-12-06 04:33:33 +00:00			`#ifdef THERMISTORHEATER_0`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)`
			`#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#elif defined(HEATER_0_USES_THERMISTOR)`
			`#error "No heater 0 thermistor table specified"`
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 2011-12-06 04:33:33 +00:00			`#else`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#define HEATER_0_TEMPTABLE NULL`
			`#define HEATER_0_TEMPTABLE_LEN 0`
			`#endif`

			`#ifdef THERMISTORHEATER_1`
			`#define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)`
			`#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)`
			`#elif defined(HEATER_1_USES_THERMISTOR)`
			`#error "No heater 1 thermistor table specified"`
			`#else`
			`#define HEATER_1_TEMPTABLE NULL`
			`#define HEATER_1_TEMPTABLE_LEN 0`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#endif`

Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef THERMISTORHEATER_2`
			`#define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)`
			`#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)`
			`#elif defined(HEATER_2_USES_THERMISTOR)`
			`#error "No heater 2 thermistor table specified"`
			`#else`
			`#define HEATER_2_TEMPTABLE NULL`
			`#define HEATER_2_TEMPTABLE_LEN 0`
			`#endif`

			`#ifdef THERMISTORHEATER_3`
			`#define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)`
			`#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)`
			`#elif defined(HEATER_3_USES_THERMISTOR)`
			`#error "No heater 3 thermistor table specified"`
			`#else`
			`#define HEATER_3_TEMPTABLE NULL`
			`#define HEATER_3_TEMPTABLE_LEN 0`
			`#endif`

			`#ifdef THERMISTORBED`
			`#define BEDTEMPTABLE TT_NAME(THERMISTORBED)`
			`#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)`
			`#else`
			`#ifdef BED_USES_THERMISTOR`
			`#error "No bed thermistor table specified"`
			`#endif`
			`#endif`

			`// Set the high and low raw values for the heaters`
			`// For thermistors the highest temperature results in the lowest ADC value`
			`// For thermocouples the highest temperature results in the highest ADC value`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#ifndef HEATER_0_RAW_HI_TEMP`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef HEATER_0_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_0_RAW_HI_TEMP 0`
			`#define HEATER_0_RAW_LO_TEMP 16383`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_0_RAW_HI_TEMP 16383`
			`#define HEATER_0_RAW_LO_TEMP 0`
			`#endif`
Temperature changes 2011-11-05 18:21:36 +00:00			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#ifndef HEATER_1_RAW_HI_TEMP`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef HEATER_1_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_1_RAW_HI_TEMP 0`
			`#define HEATER_1_RAW_LO_TEMP 16383`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_1_RAW_HI_TEMP 16383`
			`#define HEATER_1_RAW_LO_TEMP 0`
			`#endif`
Added thermistor tables 2011-11-04 21:51:14 +00:00			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#ifndef HEATER_2_RAW_HI_TEMP`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef HEATER_2_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_2_RAW_HI_TEMP 0`
			`#define HEATER_2_RAW_LO_TEMP 16383`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_2_RAW_HI_TEMP 16383`
			`#define HEATER_2_RAW_LO_TEMP 0`
			`#endif`
Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4 2011-12-06 04:33:33 +00:00			`#endif`
Add 4th extruder 2015-01-23 22:13:06 +00:00			`#ifndef HEATER_3_RAW_HI_TEMP`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef HEATER_3_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_3_RAW_HI_TEMP 0`
			`#define HEATER_3_RAW_LO_TEMP 16383`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_3_RAW_HI_TEMP 16383`
			`#define HEATER_3_RAW_LO_TEMP 0`
			`#endif`
Add 4th extruder 2015-01-23 22:13:06 +00:00			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#ifndef HEATER_BED_RAW_HI_TEMP`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#ifdef BED_USES_THERMISTOR`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_BED_RAW_HI_TEMP 0`
			`#define HEATER_BED_RAW_LO_TEMP 16383`
Split up thermistor tables 2016-12-19 22:27:39 +00:00			`#else`
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting 2015-10-03 06:08:58 +00:00			`#define HEATER_BED_RAW_HI_TEMP 16383`
			`#define HEATER_BED_RAW_LO_TEMP 0`
			`#endif`
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 22:00:06 +00:00			`#endif`
Added thermistor tables 2011-11-04 21:51:14 +00:00
Cosmetic changes and small fix for thermistortables.h ・Adjust spacing ・Standardize comments position ・Remove ',' at the tail of array 2016-06-20 18:53:55 +00:00			`#endif // THERMISTORTABLES_H_`