muele-marlin/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * MKS Robin mini (STM32F130VET6) board pin assignments
 */

#ifndef __STM32F1__
  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
  #error "MKS Robin mini only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif

#define BOARD_INFO_NAME "MKS Robin Mini"

//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG

//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
  #define FLASH_EEPROM_EMULATION
  #define EEPROM_PAGE_SIZE              (0x800U)  // 2KB
  #define EEPROM_START_ADDRESS      (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
  #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE  // 2KB
#endif

#define ENABLE_SPI2

//
// Limit Switches
//
#define X_STOP_PIN                          PA15
#define Y_STOP_PIN                          PA12
#define Z_MIN_PIN                           PA11
#define Z_MAX_PIN                           PC4

#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN                    PA4   // MT_DET
#endif

//
// Steppers
//
#define X_ENABLE_PIN                        PE4
#define X_STEP_PIN                          PE3
#define X_DIR_PIN                           PE2

#define Y_ENABLE_PIN                        PE1
#define Y_STEP_PIN                          PE0
#define Y_DIR_PIN                           PB9

#define Z_ENABLE_PIN                        PB8
#define Z_STEP_PIN                          PB5
#define Z_DIR_PIN                           PB4

#define E0_ENABLE_PIN                       PB3
#define E0_STEP_PIN                         PD6
#define E0_DIR_PIN                          PD3


// Motor current PWM pins
#define MOTOR_CURRENT_PWM_XY_PIN            PA6
#define MOTOR_CURRENT_PWM_Z_PIN             PA7
#define MOTOR_CURRENT_PWM_E_PIN             PB0
#define MOTOR_CURRENT_PWM_RANGE             1500  // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
#ifndef DEFAULT_PWM_MOTOR_CURRENT
  #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } 
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN                          PC1   // TH1
#define TEMP_BED_PIN                        PC0   // TB1

//
// Heaters / Fans
//
#define HEATER_0_PIN                        PC3
#define HEATER_BED_PIN                      PA0

#define FAN_PIN                             PB1   // FAN

//
// Misc. Functions
//
#define POWER_LOSS_PIN                      PA2   // PW_DET
#define PS_ON_PIN                           PA3   // PW_OFF

#define SERVO0_PIN                          PA8   // Enable BLTOUCH support on IO0 (WIFI connector)

#define MT_DET_1_PIN                        PA4
#define MT_DET_PIN_INVERTING false

#define WIFI_IO0_PIN                        PC13

//
// SD Card
//
#ifndef SDCARD_CONNECTION
  #define SDCARD_CONNECTION              ONBOARD
#endif

#define SDIO_SUPPORT
#define SDIO_CLOCK                       4500000  // 4.5 MHz
#define SD_DETECT_PIN                       PD12
#define ONBOARD_SD_CS_PIN                   PC11

//
// LCD / Controller
//
#define BEEPER_PIN                          PC5

/**
 * Note: MKS Robin TFT screens use various TFT controllers.
 * If the screen stays white, disable 'LCD_RESET_PIN'
 * to let the bootloader init the screen.
 */
  #define XPT2046_X_CALIBRATION            12033
  #define XPT2046_Y_CALIBRATION            -9047
  #define XPT2046_X_OFFSET                   -30
  #define XPT2046_Y_OFFSET                   254

#if ENABLED(FSMC_GRAPHICAL_TFT)

  #define FSMC_CS_PIN                       PD7   // NE4
  #define FSMC_RS_PIN                       PD11  // A0

  #define LCD_USE_DMA_FSMC                  // Use DMA transfers to send data to the TFT
  #define FSMC_DMA_DEV                      DMA2
  #define FSMC_DMA_CHANNEL                  DMA_CH5

  #define LCD_RESET_PIN                     PC6   // FSMC_RST
  #define LCD_BACKLIGHT_PIN                 PD13

  #if NEED_TOUCH_PINS
    #define TOUCH_CS_PIN                    PC2   // SPI2_NSS
    #define TOUCH_SCK_PIN                   PB13  // SPI2_SCK
    #define TOUCH_MISO_PIN                  PB14  // SPI2_MISO
    #define TOUCH_MOSI_PIN                  PB15  // SPI2_MOSI
  #endif

#elif ENABLED(TFT_320x240) //TFT32/28

  #define TFT_RESET_PIN                     PC6
  #define TFT_BACKLIGHT_PIN                 PD13

  #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
  #define FSMC_CS_PIN                       PD7
  #define FSMC_RS_PIN                       PD11
  #define FSMC_DMA_DEV                      DMA2
  #define FSMC_DMA_CHANNEL               DMA_CH5

  #define TOUCH_CS_PIN                      PC2   // SPI2_NSS
  #define TOUCH_SCK_PIN                     PB13  // SPI2_SCK
  #define TOUCH_MISO_PIN                    PB14  // SPI2_MISO
  #define TOUCH_MOSI_PIN                    PB15  // SPI2_MOSI

  #define TFT_DRIVER                     ILI9341
  #define TFT_BUFFER_SIZE                  14400
 
  // YV for normal screen mounting
  #define ILI9341_ORIENTATION  ILI9341_MADCTL_MY | ILI9341_MADCTL_MV
  // XV for 180° rotated screen mounting
  //#define ILI9341_ORIENTATION  ILI9341_MADCTL_MX | ILI9341_MADCTL_MV

  #define ILI9341_COLOR_RGB
#endif

#define HAS_SPI_FLASH 1
#define SPI_FLASH_SIZE                 0x1000000  // 16MB
#if HAS_SPI_FLASH
  #define W25QXX_CS_PIN                     PB12  // Flash chip-select
  #define W25QXX_MOSI_PIN                   PB15
  #define W25QXX_MISO_PIN                   PB14
  #define W25QXX_SCK_PIN                    PB13
#endif