muele-marlin/Marlin/twibus.h

/*
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef TWIBUS_H
#define TWIBUS_H

#include "macros.h"

#include <Wire.h>

// Print debug messages with M111 S2 (Uses 236 bytes of PROGMEM)
//#define DEBUG_TWIBUS

typedef void (*twiReceiveFunc_t)(int bytes);
typedef void (*twiRequestFunc_t)();

#define TWIBUS_BUFFER_SIZE 32

/**
 * TWIBUS class
 *
 * This class implements a wrapper around the two wire (I2C) bus, it allows
 * Marlin to send and request data from any slave device on the bus. This is
 * an experimental feature and it's inner workings as well as public facing
 * interface are prune to change in the future.
 *
 * The two main consumers of this class are M260 and M261, where M260 allows
 * Marlin to send a I2C packet to a device (please be aware that no repeated
 * starts are possible), this can be done in caching method by calling multiple
 * times M260 B<byte-1 value in base 10> or a one liner M260, have a look at
 * the gcode_M260() function for more information. M261 allows Marlin to
 * request data from a device, the received data is then relayed into the serial
 * line for host interpretation.
 *
 */
class TWIBus {
  private:
    /**
     * @brief Number of bytes on buffer
     * @description Number of bytes in the buffer waiting to be flushed to the bus
     */
    uint8_t buffer_s = 0;

    /**
     * @brief Internal buffer
     * @details A fixed buffer. TWI commands can be no longer than this.
     */
    char buffer[TWIBUS_BUFFER_SIZE];


  public:
    /**
     * @brief Target device address
     * @description The target device address. Persists until changed.
     */
    uint8_t addr = 0;

    /**
     * @brief Class constructor
     * @details Initialize the TWI bus and clear the buffer
     */
    TWIBus();

    /**
     * @brief Reset the buffer
     * @details Set the buffer to a known-empty state
     */
    void reset();

    /**
     * @brief Send the buffer data to the bus
     * @details Flush the buffer to the target address
     */
    void send();

    /**
     * @brief Add one byte to the buffer
     * @details Add a byte to the end of the buffer.
     *          Silently fails if the buffer is full.
     *
     * @param c a data byte
     */
    void addbyte(const char c);

    /**
     * @brief Add some bytes to the buffer
     * @details Add bytes to the end of the buffer.
     *          Concatenates at the buffer size.
     *
     * @param src source data address
     * @param bytes the number of bytes to add
     */
    void addbytes(char src[], uint8_t bytes);

    /**
     * @brief Add a null-terminated string to the buffer
     * @details Add bytes to the end of the buffer up to a nul.
     *          Concatenates at the buffer size.
     *
     * @param str source string address
     */
    void addstring(char str[]);

    /**
     * @brief Set the target slave address
     * @details The target slave address for sending the full packet
     *
     * @param adr 7-bit integer address
     */
    void address(const uint8_t adr);

    /**
     * @brief Prefix for echo to serial
     * @details Echo a label, length, address, and "data:"
     *
     * @param bytes the number of bytes to request
     */
    static void echoprefix(uint8_t bytes, const char prefix[], uint8_t adr);

    /**
     * @brief Echo data on the bus to serial
     * @details Echo some number of bytes from the bus
     *          to serial in a parser-friendly format.
     *
     * @param bytes the number of bytes to request
     */
    static void echodata(uint8_t bytes, const char prefix[], uint8_t adr);

    /**
     * @brief Echo data in the buffer to serial
     * @details Echo the entire buffer to serial
     *          to serial in a parser-friendly format.
     *
     * @param bytes the number of bytes to request
     */
    void echobuffer(const char prefix[], uint8_t adr);

    /**
     * @brief Request data from the slave device and wait.
     * @details Request a number of bytes from a slave device.
     *          Wait for the data to arrive, and return true
     *          on success.
     *
     * @param bytes the number of bytes to request
     * @return status of the request: true=success, false=fail
     */
    bool request(const uint8_t bytes);

    /**
     * @brief Capture data from the bus into the buffer.
     * @details Capture data after a request has succeeded.
     *
     * @param bytes the number of bytes to request
     * @return the number of bytes captured to the buffer
     */
    uint8_t capture(char *dst, const uint8_t bytes);

    /**
     * @brief Flush the i2c bus.
     * @details Get all bytes on the bus and throw them away.
     */
    static void flush();

    /**
     * @brief Request data from the slave device, echo to serial.
     * @details Request a number of bytes from a slave device and output
     *          the returned data to serial in a parser-friendly format.
     *
     * @param bytes the number of bytes to request
     */
    void relay(const uint8_t bytes);

    #if I2C_SLAVE_ADDRESS > 0

      /**
       * @brief Register a slave receive handler
       * @details Set a handler to receive data addressed to us
       *
       * @param handler A function to handle receiving bytes
       */
      inline void onReceive(const twiReceiveFunc_t handler) { Wire.onReceive(handler); }

      /**
       * @brief Register a slave request handler
       * @details Set a handler to send data requested from us
       *
       * @param handler A function to handle receiving bytes
       */
      inline void onRequest(const twiRequestFunc_t handler) { Wire.onRequest(handler); }

      /**
       * @brief Default handler to receive
       * @details Receive bytes sent to our slave address
       *          and simply echo them to serial.
       */
      void receive(uint8_t bytes);

      /**
       * @brief Send a reply to the bus
       * @details Send the buffer and clear it.
       *          If a string is passed, write it into the buffer first.
       */
      void reply(char str[]=NULL);
      inline void reply(const char str[]) { this->reply((char*)str); }

    #endif

    #if ENABLED(DEBUG_TWIBUS)

      /**
       * @brief Prints a debug message
       * @details Prints a simple debug message "TWIBus::function: value"
       */
      static void prefix(const char func[]);
      static void debug(const char func[], uint32_t adr);
      static void debug(const char func[], char c);
      static void debug(const char func[], char adr[]);
      static inline void debug(const char func[], uint8_t v) { debug(func, (uint32_t)v); }

    #endif
};

#endif //TWIBUS_H