muele-marlin/Marlin/MarlinConfig.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef MARLIN_CONFIG_H
#define MARLIN_CONFIG_H

#include "fastio.h"
#include "macros.h"
#include "boards.h"
#include "Version.h"
#include "Configuration.h"
#include "Conditionals_LCD.h"
#include "Configuration_adv.h"
#include "pins.h"
#ifndef USBCON
  #define HardwareSerial_h // trick to disable the standard HWserial
#endif
#include "Arduino.h"
#include "Conditionals_post.h"
#include "SanityCheck.h"

#endif // MARLIN_CONFIG_H
Unify config in a single include without nested includes 2016-07-26 06:04:19 +00:00			`/**`
			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

			`#ifndef MARLIN_CONFIG_H`
			`#define MARLIN_CONFIG_H`

Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins. 2016-07-27 10:40:44 +00:00			`#include "fastio.h"`
Include boards and macros ahead of configs 2016-07-26 06:22:45 +00:00			`#include "macros.h"`
			`#include "boards.h"`
Move versioning to MarlinConfig.h 2016-07-26 19:16:59 +00:00			`#include "Version.h"`
Unify config in a single include without nested includes 2016-07-26 06:04:19 +00:00			`#include "Configuration.h"`
			`#include "Conditionals_LCD.h"`
			`#include "Configuration_adv.h"`
Move pins / Arduino includes to MarlinConfig.h 2016-07-26 19:16:22 +00:00			`#include "pins.h"`
			`#ifndef USBCON`
			`#define HardwareSerial_h // trick to disable the standard HWserial`
			`#endif`
			`#include "Arduino.h"`
Make Conditionals.h a catch-all for old configs 2016-07-26 06:12:03 +00:00			`#include "Conditionals_post.h"`
Revert to SanityCheck on every .cpp file 2016-07-29 00:08:28 +00:00			`#include "SanityCheck.h"`
Unify config in a single include without nested includes 2016-07-26 06:04:19 +00:00
			`#endif // MARLIN_CONFIG_H`