183 lines
5.7 KiB
C
183 lines
5.7 KiB
C
|
/**
|
||
|
|
* Marlin 3D Printer Firmware
|
||
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||
|
|
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||
|
|
*
|
||
|
|
* Based on Sprinter and grbl.
|
||
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||
|
|
*
|
||
|
|
* This program is free software: you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License as published by
|
||
|
|
* the Free Software Foundation, either version 3 of the License, or
|
||
|
|
* (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Azteeg X5 MINI pin assignments
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef TARGET_LPC1768
|
||
|
|
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef BOARD_NAME
|
||
|
|
#define BOARD_NAME "Azteeg X5 MINI WIFI"
|
||
|
|
#define DEFAULT_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set CPU
|
||
|
|
//
|
||
|
|
#undef F_CPU
|
||
|
|
#define F_CPU 120000000
|
||
|
|
|
||
|
|
//
|
||
|
|
// Servo
|
||
|
|
//
|
||
|
|
#define SERVO0_PIN P1_23
|
||
|
|
|
||
|
|
//
|
||
|
|
// Limit Switches
|
||
|
|
//
|
||
|
|
#define X_MIN_PIN P1_24
|
||
|
|
#define Y_MIN_PIN P1_26
|
||
|
|
#define Z_MIN_PIN P1_28
|
||
|
|
|
||
|
|
//
|
||
|
|
// Steppers
|
||
|
|
//
|
||
|
|
#define X_STEP_PIN P2_01
|
||
|
|
#define X_DIR_PIN P0_11
|
||
|
|
#define X_ENABLE_PIN P0_10
|
||
|
|
|
||
|
|
#define Y_STEP_PIN P2_02
|
||
|
|
#define Y_DIR_PIN P0_20
|
||
|
|
#define Y_ENABLE_PIN P0_19
|
||
|
|
|
||
|
|
#define Z_STEP_PIN P2_03
|
||
|
|
#define Z_DIR_PIN P0_22
|
||
|
|
#define Z_ENABLE_PIN P0_21
|
||
|
|
|
||
|
|
#define E0_STEP_PIN P2_00
|
||
|
|
#define E0_DIR_PIN P0_05
|
||
|
|
#define E0_ENABLE_PIN P0_04
|
||
|
|
|
||
|
|
//
|
||
|
|
// DIGIPOT slave addresses
|
||
|
|
//
|
||
|
|
#define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
|
||
|
|
#define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
|
||
|
|
|
||
|
|
//
|
||
|
|
// Temperature Sensors
|
||
|
|
// 3.3V max when defined as an analog input
|
||
|
|
//
|
||
|
|
#define TEMP_BED_PIN 0 // A0 (TH1)
|
||
|
|
#define TEMP_0_PIN 1 // A1 (TH2)
|
||
|
|
|
||
|
|
//
|
||
|
|
// Heaters / Fans
|
||
|
|
//
|
||
|
|
#define HEATER_BED_PIN P2_07
|
||
|
|
#define HEATER_0_PIN P2_05
|
||
|
|
#ifndef FAN_PIN
|
||
|
|
#define FAN_PIN P0_26
|
||
|
|
#endif
|
||
|
|
#define FAN1_PIN P1_25
|
||
|
|
|
||
|
|
//
|
||
|
|
// Display
|
||
|
|
//
|
||
|
|
#if ENABLED(ULTRA_LCD)
|
||
|
|
|
||
|
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||
|
|
|
||
|
|
// Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
|
||
|
|
// Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
|
||
|
|
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
|
||
|
|
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
|
||
|
|
|
||
|
|
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
|
||
|
|
|
||
|
|
#define BTN_EN1 P0_16 // J3-7 & AUX-4
|
||
|
|
#define BTN_EN2 P1_23 // J3-5 & AUX-4
|
||
|
|
#define BTN_ENC P3_25 // J3-4 & AUX-4
|
||
|
|
|
||
|
|
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
|
||
|
|
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
|
||
|
|
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
|
||
|
|
|
||
|
|
#else
|
||
|
|
|
||
|
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||
|
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||
|
|
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
||
|
|
|
||
|
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||
|
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
||
|
|
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
||
|
|
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
||
|
|
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
||
|
|
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||
|
|
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
||
|
|
|
||
|
|
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
|
||
|
|
|
||
|
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||
|
|
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
||
|
|
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
||
|
|
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
||
|
|
#elif DISABLED(NEWPANEL)
|
||
|
|
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
||
|
|
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
||
|
|
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
||
|
|
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||
|
|
//#define LCD_SCREEN_ROT_180
|
||
|
|
|
||
|
|
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
||
|
|
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
||
|
|
#define DOGLCD_SCK SCK_PIN
|
||
|
|
#define DOGLCD_MOSI MOSI_PIN
|
||
|
|
|
||
|
|
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
||
|
|
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
||
|
|
#else
|
||
|
|
#if ENABLED(ULTIPANEL)
|
||
|
|
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
||
|
|
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
||
|
|
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
||
|
|
#endif
|
||
|
|
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||
|
|
#define DOGLCD_CS P0_16 // (16)
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
||
|
|
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
||
|
|
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
||
|
|
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
||
|
|
|
||
|
|
#if ENABLED(MINIPANEL)
|
||
|
|
// GLCD features
|
||
|
|
//#define LCD_CONTRAST 190
|
||
|
|
// Uncomment screen orientation
|
||
|
|
//#define LCD_SCREEN_ROT_90
|
||
|
|
//#define LCD_SCREEN_ROT_180
|
||
|
|
//#define LCD_SCREEN_ROT_270
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif // ULTRA_LCD
|