From 670006b919a3a26a7262e1bcda0929eebae70a94 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 19 Mar 2015 22:22:23 -0700 Subject: [PATCH 01/18] Remove invariant code from Configurations - Add `Conditionals.h` with calculated configuration values - Add `SanityCheck.h` with checks for configuration errors - Remove equivalent code from all configurations - Move error checks from some sources to `SanityCheck.h` also - Fix initialization of count_direction in stepper.cpp --- Marlin/Conditionals.h | 392 +++++++++++++ Marlin/Configuration.h | 155 +---- Marlin/Configuration_adv.h | 203 +------ Marlin/Marlin_main.cpp | 100 +--- Marlin/SanityCheck.h | 261 +++++++++ Marlin/configurator/config/Configuration.h | 179 +----- .../configurator/config/Configuration_adv.h | 207 +------ .../Felix/Configuration.h | 190 +----- .../Felix/Configuration_DUAL.h | 185 +----- .../Felix/Configuration_adv.h | 541 ------------------ .../Hephestos/Configuration.h | 173 +----- .../Hephestos/Configuration_adv.h | 541 ------------------ .../K8200/Configuration.h | 173 +----- .../K8200/Configuration_adv.h | 203 +------ .../SCARA/Configuration.h | 173 +----- .../SCARA/Configuration_adv.h | 194 +------ .../WITBOX/Configuration.h | 173 +----- .../WITBOX/Configuration_adv.h | 197 +------ .../delta/generic/Configuration.h | 173 +----- .../delta/generic/Configuration_adv.h | 207 +------ .../delta/kossel_mini/Configuration.h | 173 +----- .../delta/kossel_mini/Configuration_adv.h | 207 +------ .../makibox/Configuration.h | 173 +----- .../makibox/Configuration_adv.h | 186 +----- .../tvrrug/Round2/Configuration.h | 173 +----- .../tvrrug/Round2/Configuration_adv.h | 184 +----- Marlin/language.h | 2 - Marlin/stepper.cpp | 2 +- Marlin/temperature.cpp | 93 +-- Marlin/ultralcd.cpp | 4 - 30 files changed, 937 insertions(+), 4880 deletions(-) create mode 100644 Marlin/Conditionals.h create mode 100644 Marlin/SanityCheck.h delete mode 100644 Marlin/example_configurations/Felix/Configuration_adv.h delete mode 100644 Marlin/example_configurations/Hephestos/Configuration_adv.h diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h new file mode 100644 index 0000000000..6e62bf7eed --- /dev/null +++ b/Marlin/Conditionals.h @@ -0,0 +1,392 @@ +/** + * Conditionals.h + * Defines that depend on configuration but are not editable. + */ +#ifndef CONDITIONALS_H + #define CONDITIONALS_H + + #include "pins.h" + + /** + * ENDSTOPPULLUPS + */ + #ifdef ENDSTOPPULLUPS + #ifndef DISABLE_MAX_ENDSTOPS + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #endif + #ifndef DISABLE_MIN_ENDSTOPS + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + #endif + #endif + + /** + * Axis lengths + */ + #define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) + #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) + #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) + + /** + * SCARA + */ + #ifdef SCARA + #undef SLOWDOWN + #define QUICK_HOME //SCARA needs Quickhome + #endif + + + /** + * LCD Controllers + */ + + #if defined (MAKRPANEL) + #define DOGLCD + #define SDSUPPORT + #define ULTIPANEL + #define NEWPANEL + #define DEFAULT_LCD_CONTRAST 17 + #endif + + #if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + #ifdef PANEL_ONE + #define SDSUPPORT + #define ULTIMAKERCONTROLLER + #endif + + #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + #define DOGLCD + #define U8GLIB_ST7920 + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #endif + + #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) + #define ULTIPANEL + #define NEWPANEL + #endif + + #ifdef REPRAPWORLD_KEYPAD + #define NEWPANEL + #define ULTIPANEL + #endif + + #ifdef RA_CONTROL_PANEL + #define ULTIPANEL + #define NEWPANEL + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #endif + + /** + * I2C PANELS + */ + + #ifdef LCD_I2C_SAINSMART_YWROBOT + // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) + // Make sure it is placed in the Arduino libraries directory. + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define NEWPANEL + #define ULTIPANEL + #endif + + // PANELOLU2 LCD with status LEDs, separate encoder and click inputs + #ifdef LCD_I2C_PANELOLU2 + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) + // Note: The PANELOLU2 encoder click input can either be directly connected to a pin + // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD + #define NEWPANEL + #define ULTIPANEL + + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 4 + #endif + + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + + #ifdef LCD_USE_I2C_BUZZER + #define LCD_FEEDBACK_FREQUENCY_HZ 1000 + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 + #endif + + #endif + + // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs + #ifdef LCD_I2C_VIKI + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // Note: The pause/stop/resume LCD button pin should be connected to the Arduino + // BTN_ENC pin (or set BTN_ENC to -1 if not used) + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define NEWPANEL + #define ULTIPANEL + #endif + + // Shift register panels + // --------------------- + // 2 wire Non-latching LCD SR from: + // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection + + #ifdef SAV_3DLCD + #define SR_LCD_2W_NL // Non latching 2 wire shiftregister + #define NEWPANEL + #define ULTIPANEL + #endif + + + #ifdef ULTIPANEL + #define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the DOG graphic display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif + #else //no panel but just LCD + #ifdef ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif + #endif + #endif + + /** + * Default LCD contrast for dogm-like LCD displays + */ + #if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST) + #define DEFAULT_LCD_CONTRAST 32 + #endif + + /** + * AUTOSET LOCATIONS OF LIMIT SWITCHES + * Added by ZetaPhoenix 09-15-2012 + */ + #ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations + #define X_HOME_POS MANUAL_X_HOME_POS + #define Y_HOME_POS MANUAL_Y_HOME_POS + #define Z_HOME_POS MANUAL_Z_HOME_POS + #else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits + #ifdef BED_CENTER_AT_0_0 + #define X_HOME_POS X_MAX_LENGTH * X_HOME_DIR * 0.5 + #define Y_HOME_POS Y_MAX_LENGTH * Y_HOME_DIR * 0.5 + #else + #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS) + #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS) + #endif + #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS) + #endif //!MANUAL_HOME_POSITIONS + + /** + * Auto Bed Leveling + */ + #ifdef ENABLE_AUTO_BED_LEVELING + // Boundaries for probing based on set limits + #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #endif + + /** + * MAX_STEP_FREQUENCY differs for TOSHIBA + */ + #ifdef CONFIG_STEPPERS_TOSHIBA + #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers + #else + #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + #endif + + // MS1 MS2 Stepper Driver Microstepping mode table + #define MICROSTEP1 LOW,LOW + #define MICROSTEP2 HIGH,LOW + #define MICROSTEP4 LOW,HIGH + #define MICROSTEP8 HIGH,HIGH + #define MICROSTEP16 HIGH,HIGH + + /** + * Advance calculated values + */ + #ifdef ADVANCE + #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) + #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / EXTRUSION_AREA) + #endif + + #ifdef ULTIPANEL + #undef SDCARDDETECTINVERTED + #endif + + // Power Signal Control Definitions + // By default use ATX definition + #ifndef POWER_SUPPLY + #define POWER_SUPPLY 1 + #endif + // 1 = ATX + #if (POWER_SUPPLY == 1) + #define PS_ON_AWAKE LOW + #define PS_ON_ASLEEP HIGH + #endif + // 2 = X-Box 360 203W + #if (POWER_SUPPLY == 2) + #define PS_ON_AWAKE HIGH + #define PS_ON_ASLEEP LOW + #endif + + /** + * Temp Sensor defines + */ + #if TEMP_SENSOR_0 == -2 + #define HEATER_0_USES_MAX6675 + #elif TEMP_SENSOR_0 == -1 + #define HEATER_0_USES_AD595 + #elif TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP + #elif TEMP_SENSOR_0 > 0 + #define THERMISTORHEATER_0 TEMP_SENSOR_0 + #define HEATER_0_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_1 == -1 + #define HEATER_1_USES_AD595 + #elif TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP + #elif TEMP_SENSOR_1 > 0 + #define THERMISTORHEATER_1 TEMP_SENSOR_1 + #define HEATER_1_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_2 == -1 + #define HEATER_2_USES_AD595 + #elif TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP + #elif TEMP_SENSOR_2 > 0 + #define THERMISTORHEATER_2 TEMP_SENSOR_2 + #define HEATER_2_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 + #elif TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP + #elif TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_BED == -1 + #define BED_USES_AD595 + #elif TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP + #elif TEMP_SENSOR_BED > 0 + #define THERMISTORBED TEMP_SENSOR_BED + #define BED_USES_THERMISTOR + #endif + + /** + * ARRAY_BY_EXTRUDERS based on EXTRUDERS + */ + #if EXTRUDERS > 3 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 } + #elif EXTRUDERS > 2 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 } + #elif EXTRUDERS > 1 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 } + #else + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 } + #endif + + /** + * Shorthand for pin tests, for temperature.cpp + */ + #define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN >= 0) + #define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN >= 0) + #define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN >= 0) + #define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN >= 0) + #define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN >= 0) + #define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN >= 0) + #define HAS_HEATER_0 (defined(HEATER_0_PIN) && HEATER_0_PIN >= 0) + #define HAS_HEATER_1 (defined(HEATER_1_PIN) && HEATER_1_PIN >= 0) + #define HAS_HEATER_2 (defined(HEATER_2_PIN) && HEATER_2_PIN >= 0) + #define HAS_HEATER_3 (defined(HEATER_3_PIN) && HEATER_3_PIN >= 0) + #define HAS_HEATER_BED (defined(HEATER_BED_PIN) && HEATER_BED_PIN >= 0) + #define HAS_AUTO_FAN_0 (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_1 (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_2 (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_3 (defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 + #define HAS_FAN (defined(FAN_PIN) && FAN_PIN >= 0) + + /** + * Helper Macros for heaters and extruder fan + */ + #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v) + #if EXTRUDERS > 1 || defined(HEATERS_PARALLEL) + #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v) + #if EXTRUDERS > 2 + #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v) + #if EXTRUDERS > 3 + #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v) + #endif + #endif + #endif + #ifdef HEATERS_PARALLEL + #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); } + #else + #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v) + #endif + #if HAS_HEATER_BED + #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v) + #endif + #if HAS_FAN + #define WRITE_FAN(v) WRITE(FAN_PIN, v) + #endif + + /** + * Sampling period of the temperature routine + * This override comes originally from temperature.cpp + * The Configuration.h option is basically ignored. + */ + #ifdef PID_dT + #undef PID_dT + #endif + #define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0)) + +#endif //CONDITIONALS_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 1778fc28f6..3c5d92deee 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -358,10 +358,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define Y_MAX_POS 200 #define Z_MAX_POS 200 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - //=========================================================================== //============================= Filament Runout Sensor ====================== //=========================================================================== @@ -611,112 +607,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -724,51 +625,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -780,6 +640,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -849,6 +714,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 2c8e5ea482..42cf4d28b2 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -218,11 +156,7 @@ //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. #define AXIS_RELATIVE_MODES {false, false, false, false} -#ifdef CONFIG_STEPPERS_TOSHIBA -#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers -#else -#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) -#endif + //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. #define INVERT_X_STEP_PIN false #define INVERT_Y_STEP_PIN false @@ -237,7 +171,7 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder @@ -261,13 +195,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -313,12 +240,6 @@ #define PROGRESS_MSG_EXPIRE 0 // Enable this to show messages for MSG_TIME then hide them //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif #endif // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. @@ -342,16 +263,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -365,12 +276,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 2.85 #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -385,26 +292,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -456,13 +343,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - - /******************************************************************************\ * enable this section if you have TMC26X motor drivers. * you need to import the TMC26XStepper library into the arduino IDE for this @@ -596,81 +476,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 15f12bbc0b..08f7f92976 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -30,9 +30,6 @@ #include "Marlin.h" #ifdef ENABLE_AUTO_BED_LEVELING - #if Z_MIN_PIN == -1 - #error "You must have a Z_MIN endstop to enable Auto Bed Leveling feature. Z_MIN_PIN must point to a valid hardware pin." - #endif #include "vector_3.h" #ifdef AUTO_BED_LEVELING_GRID #include "qr_solve.h" @@ -963,43 +960,36 @@ XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); #ifdef DUAL_X_CARRIAGE - #if EXTRUDERS == 1 || defined(COREXY) \ - || !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \ - || !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \ - || !defined(X_MAX_PIN) || X_MAX_PIN < 0 - #error "Missing or invalid definitions for DUAL_X_CARRIAGE mode." - #endif - #if X_HOME_DIR != -1 || X2_HOME_DIR != 1 - #error "Please use canonical x-carriage assignment" // the x-carriages are defined by their homing directions - #endif -#define DXC_FULL_CONTROL_MODE 0 -#define DXC_AUTO_PARK_MODE 1 -#define DXC_DUPLICATION_MODE 2 -static int dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + #define DXC_FULL_CONTROL_MODE 0 + #define DXC_AUTO_PARK_MODE 1 + #define DXC_DUPLICATION_MODE 2 -static float x_home_pos(int extruder) { - if (extruder == 0) - return base_home_pos(X_AXIS) + add_homing[X_AXIS]; - else - // In dual carriage mode the extruder offset provides an override of the - // second X-carriage offset when homed - otherwise X2_HOME_POS is used. - // This allow soft recalibration of the second extruder offset position without firmware reflash - // (through the M218 command). - return (extruder_offset[X_AXIS][1] > 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS; -} + static int dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; -static int x_home_dir(int extruder) { - return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR; -} + static float x_home_pos(int extruder) { + if (extruder == 0) + return base_home_pos(X_AXIS) + add_homing[X_AXIS]; + else + // In dual carriage mode the extruder offset provides an override of the + // second X-carriage offset when homed - otherwise X2_HOME_POS is used. + // This allow soft recalibration of the second extruder offset position without firmware reflash + // (through the M218 command). + return (extruder_offset[X_AXIS][1] > 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS; + } + + static int x_home_dir(int extruder) { + return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR; + } + + static float inactive_extruder_x_pos = X2_MAX_POS; // used in mode 0 & 1 + static bool active_extruder_parked = false; // used in mode 1 & 2 + static float raised_parked_position[NUM_AXIS]; // used in mode 1 + static unsigned long delayed_move_time = 0; // used in mode 1 + static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2 + static float duplicate_extruder_temp_offset = 0; // used in mode 2 + bool extruder_duplication_enabled = false; // used in mode 2 -static float inactive_extruder_x_pos = X2_MAX_POS; // used in mode 0 & 1 -static bool active_extruder_parked = false; // used in mode 1 & 2 -static float raised_parked_position[NUM_AXIS]; // used in mode 1 -static unsigned long delayed_move_time = 0; // used in mode 1 -static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2 -static float duplicate_extruder_temp_offset = 0; // used in mode 2 -bool extruder_duplication_enabled = false; // used in mode 2 #endif //DUAL_X_CARRIAGE static void axis_is_at_home(int axis) { @@ -1959,44 +1949,6 @@ inline void gcode_G28() { #ifdef ENABLE_AUTO_BED_LEVELING - // Define the possible boundaries for probing based on set limits - #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - - #ifdef AUTO_BED_LEVELING_GRID - - // Make sure probing points are reachable - - #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X - #error "The given LEFT_PROBE_BED_POSITION can't be reached by the probe." - #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X - #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the probe." - #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y - #error "The given FRONT_PROBE_BED_POSITION can't be reached by the probe." - #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y - #error "The given BACK_PROBE_BED_POSITION can't be reached by the probe." - #endif - - #else // !AUTO_BED_LEVELING_GRID - - #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_1_X can't be reached by the probe." - #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_2_X can't be reached by the probe." - #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_3_X can't be reached by the probe." - #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_1_Y can't be reached by the probe." - #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_2_Y can't be reached by the probe." - #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_3_Y can't be reached by the probe." - #endif - - #endif // !AUTO_BED_LEVELING_GRID - /** * G29: Detailed Z-Probe, probes the bed at 3 or more points. * Will fail if the printer has not been homed with G28. diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h new file mode 100644 index 0000000000..cad6353aef --- /dev/null +++ b/Marlin/SanityCheck.h @@ -0,0 +1,261 @@ +/** + * SanityCheck.h + * + * Test configuration values for errors at compile-time. + */ +#ifndef SANITYCHECK_H + #define SANITYCHECK_H + + /** + * Dual Stepper Drivers + */ + #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Y_DUAL_STEPPER_DRIVERS) + #error You cannot have dual stepper drivers for both Y and Z. + #endif + + /** + * Progress Bar + */ + #ifdef LCD_PROGRESS_BAR + #ifdef DOGLCD + #warning LCD_PROGRESS_BAR does not apply to graphical displays. + #endif + #ifdef FILAMENT_LCD_DISPLAY + #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. + #endif + #endif + + /** + * Babystepping + */ + #ifdef BABYSTEPPING + #ifdef COREXY + #error BABYSTEPPING not implemented for COREXY yet. + #endif + #ifdef SCARA + #error BABYSTEPPING is not implemented for SCARA yet. + #endif + #if defined(DELTA) && defined(BABYSTEP_XY) + #error BABYSTEPPING only implemented for Z axis on deltabots. + #endif + #endif + + /** + * Filament Change with Extruder Runout Prevention + */ + #if defined(FILAMENTCHANGEENABLE) && defined(EXTRUDER_RUNOUT_PREVENT) + #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE. + #endif + + /** + * Auto Bed Leveling and Delta + */ + #if defined(ENABLE_AUTO_BED_LEVELING) && defined(DELTA) + #error Bed Auto Leveling is still not compatible with Delta Kinematics. + #endif + + /** + * Options only for EXTRUDERS == 1 + */ + #if EXTRUDERS > 1 + + #if EXTRUDERS > 4 + #error The maximum number of EXTRUDERS is 4. + #endif + + #ifdef TEMP_SENSOR_1_AS_REDUNDANT + #error EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT. + #endif + + #ifdef HEATERS_PARALLEL + #error EXTRUDERS must be 1 with HEATERS_PARALLEL. + #endif + + #ifdef Y_DUAL_STEPPER_DRIVERS + #error EXTRUDERS must be 1 with Y_DUAL_STEPPER_DRIVERS. + #endif + + #ifdef Z_DUAL_STEPPER_DRIVERS + #error EXTRUDERS must be 1 with Z_DUAL_STEPPER_DRIVERS. + #endif + + #endif // EXTRUDERS > 1 + + /** + * Required LCD language + */ + #if !defined(DOGLCD) && defined(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780_JAPAN) && !defined(DISPLAY_CHARSET_HD44780_WESTERN) + #error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller. + #endif + + /** + * Auto Bed Leveling + */ + #ifdef ENABLE_AUTO_BED_LEVELING + + /** + * Require a Z Min pin + */ + #if Z_MIN_PIN == -1 + #ifdef Z_PROBE_REPEATABILITY_TEST + #error You must have a Z_MIN endstop to enable Z_PROBE_REPEATABILITY_TEST. + #else + #error ENABLE_AUTO_BED_LEVELING requires a Z_MIN endstop. Z_MIN_PIN must point to a valid hardware pin. + #endif + #endif + + /** + * Check if Probe_Offset * Grid Points is greater than Probing Range + */ + #ifdef AUTO_BED_LEVELING_GRID + + // Make sure probing points are reachable + #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X + #error "The given LEFT_PROBE_BED_POSITION can't be reached by the probe." + #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X + #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the probe." + #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y + #error "The given FRONT_PROBE_BED_POSITION can't be reached by the probe." + #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y + #error "The given BACK_PROBE_BED_POSITION can't be reached by the probe." + #endif + + #define PROBE_SIZE_X (X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) + #define PROBE_SIZE_Y (Y_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) + #define PROBE_AREA_WIDTH (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION) + #define PROBE_AREA_DEPTH (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION) + #if X_PROBE_OFFSET_FROM_EXTRUDER < 0 + #if PROBE_SIZE_X <= -PROBE_AREA_WIDTH + #define X_PROBE_ERROR + #endif + #elif PROBE_SIZE_X >= PROBE_AREA_WIDTH + #define X_PROBE_ERROR + #endif + #ifdef X_PROBE_ERROR + #error The X axis probing range is too small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS + #endif + #if Y_PROBE_OFFSET_FROM_EXTRUDER < 0 + #if PROBE_SIZE_Y <= -PROBE_AREA_DEPTH + #define Y_PROBE_ERROR + #endif + #elif PROBE_SIZE_Y >= PROBE_AREA_DEPTH + #define Y_PROBE_ERROR + #endif + #ifdef Y_PROBE_ERROR + #error The Y axis probing range is to small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS + #endif + + #undef PROBE_SIZE_X + #undef PROBE_SIZE_Y + #undef PROBE_AREA_WIDTH + #undef PROBE_AREA_DEPTH + + #else // !AUTO_BED_LEVELING_GRID + + // Check the triangulation points + #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_1_X can't be reached by the probe." + #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_2_X can't be reached by the probe." + #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_3_X can't be reached by the probe." + #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_1_Y can't be reached by the probe." + #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_2_Y can't be reached by the probe." + #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_3_Y can't be reached by the probe." + #endif + + #endif // !AUTO_BED_LEVELING_GRID + + #endif // ENABLE_AUTO_BED_LEVELING + + /** + * ULTIPANEL encoder + */ + #if defined(ULTIPANEL) && !defined(NEWPANEL) && !defined(SR_LCD_2W_NL) && !defined(SHIFT_CLK) + #error ULTIPANEL requires some kind of encoder. + #endif + + /** + * Delta has limited bed leveling options + */ + #if defined(DELTA) + + #ifdef ENABLE_AUTO_BED_LEVELING + + #ifndef AUTO_BED_LEVELING_GRID + #error Only AUTO_BED_LEVELING_GRID is supported with DELTA. + #endif + + #ifdef Z_PROBE_SLED + #error You cannot use Z_PROBE_SLED with DELTA. + #endif + + #ifdef Z_PROBE_REPEATABILITY_TEST + #error Z_PROBE_REPEATABILITY_TEST is not supported with DELTA yet. + #endif + + #endif + + #endif + + /** + * Allen Key Z Probe requires Auto Bed Leveling grid and Delta + */ + #if defined(Z_PROBE_ALLEN_KEY) && !(defined(AUTO_BED_LEVELING_GRID) && defined(DELTA)) + #error Invalid use of Z_PROBE_ALLEN_KEY. + #endif + + /** + * Dual X Carriage requirements + */ + #ifdef DUAL_X_CARRIAGE + #if EXTRUDERS == 1 || defined(COREXY) \ + || !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \ + || !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \ + || !defined(X_MAX_PIN) || X_MAX_PIN < 0 + #error Missing or invalid definitions for DUAL_X_CARRIAGE mode. + #endif + #if X_HOME_DIR != -1 || X2_HOME_DIR != 1 + #error Please use canonical x-carriage assignment. + #endif + #endif // DUAL_X_CARRIAGE + + /** + * Make sure auto fan pins don't conflict with the fan pin + */ + #if HAS_AUTO_FAN && HAS_FAN + #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN + #error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN + #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN + #error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN + #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN + #error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN + #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN + #error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN + #endif + #endif + + /** + * Test required HEATER defines + */ + #if EXTRUDERS > 3 + #if !HAS_HEATER_3 + #error HEATER_3_PIN not defined for this board + #endif + #elif EXTRUDERS > 2 + #if !HAS_HEATER_2 + #error HEATER_2_PIN not defined for this board + #endif + #elif EXTRUDERS > 1 || defined(HEATERS_PARALLEL) + #if !HAS_HEATER_1 + #error HEATER_1_PIN not defined for this board + #endif + #endif + #if !HAS_HEATER_0 + #error HEATER_0_PIN not defined for this board + #endif + +#endif //SANITYCHECK_H diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 89bfe5c18f..04de471cd1 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -328,15 +328,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -403,12 +394,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Y_MAX_POS 205 #define Z_MAX_POS 200 -// @section hidden - -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -654,114 +648,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -// @section hidden - -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -769,55 +666,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// @section lcd - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // @section extras // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -829,6 +683,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -898,6 +757,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h index 00722c142f..24243a48d9 100644 --- a/Marlin/configurator/config/Configuration_adv.h +++ b/Marlin/configurator/config/Configuration_adv.h @@ -99,56 +99,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -// @section hidden - - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - // @section extras //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. @@ -160,26 +110,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -236,14 +172,6 @@ #define AXIS_RELATIVE_MODES {false, false, false, false} -// @section hidden - -#ifdef CONFIG_STEPPERS_TOSHIBA - #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers -#else - #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) -#endif - // @section machine //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. @@ -262,12 +190,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // @section extras @@ -288,13 +216,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -342,12 +263,6 @@ #define PROGRESS_MSG_EXPIRE 0 // Enable this to show messages for MSG_TIME then hide them //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif #endif // @section more @@ -373,16 +288,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -418,28 +323,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -// @section hidden - -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // @section temperature // Control heater 0 and heater 1 in parallel. @@ -497,88 +380,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -// @section hidden - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 12a82f5899..03a09c6dbd 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -294,15 +294,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. @@ -351,10 +342,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 235 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -455,29 +451,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif - #ifdef AUTO_BED_LEVELING_GRID // Check if Probe_Offset * Grid Points is greater than Probing Range - #if X_PROBE_OFFSET_FROM_EXTRUDER < 0 - #if (-(X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION)) - #error "The X axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #else - #if ((X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION)) - #error "The X axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #endif - #if Y_PROBE_OFFSET_FROM_EXTRUDER < 0 - #if (-(Y_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION)) - #error "The Y axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #else - #if ((Y_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION)) - #error "The Y axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #endif - - - #endif - #endif // ENABLE_AUTO_BED_LEVELING @@ -613,112 +586,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -726,42 +604,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL - #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino #define FAST_PWM_FAN @@ -846,7 +688,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define FILAMENT_LCD_DISPLAY + + + + #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index 9b1f10263e..37c797882f 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -294,15 +294,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. @@ -351,10 +342,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 235 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -455,29 +451,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif - #ifdef AUTO_BED_LEVELING_GRID // Check if Probe_Offset * Grid Points is greater than Probing Range - #if X_PROBE_OFFSET_FROM_EXTRUDER < 0 - #if (-(X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION)) - #error "The X axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #else - #if ((X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION)) - #error "The X axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #endif - #if Y_PROBE_OFFSET_FROM_EXTRUDER < 0 - #if (-(Y_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION)) - #error "The Y axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #else - #if ((Y_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) >= (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION)) - #error "The Y axis probing range is not enough to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS" - #endif - #endif - - - #endif - #endif // ENABLE_AUTO_BED_LEVELING @@ -613,112 +586,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -726,43 +604,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif -#ifdef ULTIPANEL - #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif - // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino #define FAST_PWM_FAN @@ -847,6 +690,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h deleted file mode 100644 index f3d758d494..0000000000 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ /dev/null @@ -1,541 +0,0 @@ -#ifndef CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -#ifdef BED_LIMIT_SWITCHING - #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS -#endif -#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control - -//// Heating sanity check: -// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature -// If the temperature has not increased at the end of that period, the target temperature is set to zero. -// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature -// differ by at least 2x WATCH_TEMP_INCREASE -//#define WATCH_TEMP_PERIOD 40000 //40 seconds -//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds - -#ifdef PIDTEMP - // this adds an experimental additional term to the heating power, proportional to the extrusion speed. - // if Kc is chosen well, the additional required power due to increased melting should be compensated. - #define PID_ADD_EXTRUSION_RATE - #ifdef PID_ADD_EXTRUSION_RATE - #define DEFAULT_Kc (1) //heating power=Kc*(e_speed) - #endif -#endif - - -//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. -//The maximum buffered steps/sec of the extruder motor are called "se". -//You enter the autotemp mode by a M109 S B F -// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp -// you exit the value by any M109 without F* -// Also, if the temperature is set to a value -// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results -// as long as it supports dual x-carriages. (M605 S0) -// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so -// that additional slicer support is not required. (M605 S1) -// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all -// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at -// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) - -// This is the default power-up mode which can be later using M605. -#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 - -// Default settings in "Auto-park Mode" -#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder -#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder - -// Default x offset in duplication mode (typically set to half print bed width) -#define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif //DUAL_X_CARRIAGE - -//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 3 -#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. - -#define AXIS_RELATIVE_MODES {false, false, false, false} -#ifdef CONFIG_STEPPERS_TOSHIBA -#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers -#else -#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) -#endif -//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -//default stepper release if idle. Set to 0 to deactivate. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -// Feedrates for manual moves along X, Y, Z, E from panel -#ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY -#endif - -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) - -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] - -// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) -#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) - -// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro -//#define DIGIPOT_I2C -// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 -#define DIGIPOT_I2C_NUM_CHANNELS 8 -// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly -#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value -#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value -//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value - -//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ -#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again - -#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? -#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - -#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. -// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. -// using: -//#define MENU_ADDAUTOSTART - -// Show a progress bar on HD44780 LCDs for SD printing -//#define LCD_PROGRESS_BAR - -#ifdef LCD_PROGRESS_BAR - // Amount of time (ms) to show the bar - #define PROGRESS_BAR_BAR_TIME 2000 - // Amount of time (ms) to show the status message - #define PROGRESS_BAR_MSG_TIME 3000 - // Amount of time (ms) to retain the status message (0=forever) - #define PROGRESS_MSG_EXPIRE 0 - // Enable this to show messages for MSG_TIME then hide them - //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif -#endif - -// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. -//#define USE_WATCHDOG - -#ifdef USE_WATCHDOG -// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. -// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. -// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. -//#define WATCHDOG_RESET_MANUAL -#endif - -// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. -//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - -// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process -// it can e.g. be used to change z-positions in the print startup phase in real-time -// does not respect endstops! -//#define BABYSTEPPING -#ifdef BABYSTEPPING - #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions - #define BABYSTEP_INVERT_Z false //true for inverse movements in Z - #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif -#endif - -// extruder advance constant (s2/mm3) -// -// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2 -// -// Hooke's law says: force = k * distance -// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant -// so: v ^ 2 is proportional to number of steps we advance the extruder -//#define ADVANCE - -#ifdef ADVANCE - #define EXTRUDER_ADVANCE_K .0 - - #define D_FILAMENT 2.85 - #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - -#endif // ADVANCE - -// Arc interpretation settings: -#define MM_PER_ARC_SEGMENT 1 -#define N_ARC_CORRECTION 25 - -const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement - -// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted -// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT -// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should -// be commented out otherwise -#define SDCARDDETECTINVERTED - -//#ifdef ULTIPANEL -// #undef SDCARDDETECTINVERTED -//#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//=============================Buffers ============================ -//=========================================================================== - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. -#if defined SDSUPPORT - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - - -//The ASCII buffer for receiving from the serial: -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - - -// Firmware based and LCD controlled retract -// M207 and M208 can be used to define parameters for the retraction. -// The retraction can be called by the slicer using G10 and G11 -// until then, intended retractions can be detected by moves that only extrude and the direction. -// the moves are than replaced by the firmware controlled ones. - -// #define FWRETRACT //ONLY PARTIALLY TESTED -#ifdef FWRETRACT - #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt - #define RETRACT_LENGTH 3 //default retract length (positive mm) - #define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change - #define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s) - #define RETRACT_ZLIFT 0 //default retract Z-lift - #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering) - #define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change) - #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) -#endif - -//adds support for experimental filament exchange support M600; requires display -#ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE - #ifdef FILAMENTCHANGEENABLE - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #endif -#endif - -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 3ec047bb7d..481ece7bb9 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -320,15 +320,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -377,10 +368,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 180 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -618,112 +614,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -731,51 +632,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -787,6 +647,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -856,6 +721,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h deleted file mode 100644 index cf18b95853..0000000000 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ /dev/null @@ -1,541 +0,0 @@ -#ifndef CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -#ifdef BED_LIMIT_SWITCHING - #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS -#endif -#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control - -//// Heating sanity check: -// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature -// If the temperature has not increased at the end of that period, the target temperature is set to zero. -// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature -// differ by at least 2x WATCH_TEMP_INCREASE -//#define WATCH_TEMP_PERIOD 40000 //40 seconds -//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds - -#ifdef PIDTEMP - // this adds an experimental additional term to the heating power, proportional to the extrusion speed. - // if Kc is chosen well, the additional required power due to increased melting should be compensated. - #define PID_ADD_EXTRUSION_RATE - #ifdef PID_ADD_EXTRUSION_RATE - #define DEFAULT_Kc (1) //heating power=Kc*(e_speed) - #endif -#endif - - -//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. -//The maximum buffered steps/sec of the extruder motor are called "se". -//You enter the autotemp mode by a M109 S B F -// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp -// you exit the value by any M109 without F* -// Also, if the temperature is set to a value -// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results -// as long as it supports dual x-carriages. (M605 S0) -// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so -// that additional slicer support is not required. (M605 S1) -// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all -// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at -// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) - -// This is the default power-up mode which can be later using M605. -#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 - -// Default settings in "Auto-park Mode" -#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder -#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder - -// Default x offset in duplication mode (typically set to half print bed width) -#define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif //DUAL_X_CARRIAGE - -//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 -#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. - -#define AXIS_RELATIVE_MODES {false, false, false, false} -#ifdef CONFIG_STEPPERS_TOSHIBA -#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers -#else -#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) -#endif -//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -//default stepper release if idle. Set to 0 to deactivate. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -// Feedrates for manual moves along X, Y, Z, E from panel -#ifdef ULTIPANEL -#define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY -#endif - -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) - -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] - -// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) -#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) - -// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro -//#define DIGIPOT_I2C -// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 -#define DIGIPOT_I2C_NUM_CHANNELS 8 -// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly -#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value -#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value -//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value - -//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ -#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again - -#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? -#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - -#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. -// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. -// using: -#define MENU_ADDAUTOSTART - -// Show a progress bar on HD44780 LCDs for SD printing -//#define LCD_PROGRESS_BAR - -#ifdef LCD_PROGRESS_BAR - // Amount of time (ms) to show the bar - #define PROGRESS_BAR_BAR_TIME 2000 - // Amount of time (ms) to show the status message - #define PROGRESS_BAR_MSG_TIME 3000 - // Amount of time (ms) to retain the status message (0=forever) - #define PROGRESS_MSG_EXPIRE 0 - // Enable this to show messages for MSG_TIME then hide them - //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif -#endif - -// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. -//#define USE_WATCHDOG - -#ifdef USE_WATCHDOG -// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. -// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. -// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. -//#define WATCHDOG_RESET_MANUAL -#endif - -// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. -//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - -// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process -// it can e.g. be used to change z-positions in the print startup phase in real-time -// does not respect endstops! -//#define BABYSTEPPING -#ifdef BABYSTEPPING - #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions - #define BABYSTEP_INVERT_Z false //true for inverse movements in Z - #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif -#endif - -// extruder advance constant (s2/mm3) -// -// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2 -// -// Hooke's law says: force = k * distance -// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant -// so: v ^ 2 is proportional to number of steps we advance the extruder -//#define ADVANCE - -#ifdef ADVANCE - #define EXTRUDER_ADVANCE_K .0 - - #define D_FILAMENT 1.75 - #define STEPS_MM_E 100.47095761381482 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - -#endif // ADVANCE - -// Arc interpretation settings: -#define MM_PER_ARC_SEGMENT 1 -#define N_ARC_CORRECTION 25 - -const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement - -// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted -// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT -// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should -// be commented out otherwise -#define SDCARDDETECTINVERTED - -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//=============================Buffers ============================ -//=========================================================================== - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. -#if defined SDSUPPORT - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - - -//The ASCII buffer for receiving from the serial: -#define MAX_CMD_SIZE 96 -#define BUFSIZE 5 - - -// Firmware based and LCD controlled retract -// M207 and M208 can be used to define parameters for the retraction. -// The retraction can be called by the slicer using G10 and G11 -// until then, intended retractions can be detected by moves that only extrude and the direction. -// the moves are than replaced by the firmware controlled ones. - -// #define FWRETRACT //ONLY PARTIALLY TESTED -#ifdef FWRETRACT - #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt - #define RETRACT_LENGTH 3 //default retract length (positive mm) - #define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change - #define RETRACT_FEEDRATE 80*60 //default feedrate for retracting (mm/s) - #define RETRACT_ZLIFT 0 //default retract Z-lift - #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering) - //#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change) - #define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s) -#endif - -//adds support for experimental filament exchange support M600; requires display -#ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE - #ifdef FILAMENTCHANGEENABLE - #define FILAMENTCHANGE_XPOS 3 - #define FILAMENTCHANGE_YPOS 3 - #define FILAMENTCHANGE_ZADD 10 - #define FILAMENTCHANGE_FIRSTRETRACT -2 - #define FILAMENTCHANGE_FINALRETRACT -100 - #endif -#endif - -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 1bd2d63258..f3e063e34f 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -325,15 +325,6 @@ your extruder heater takes 2 minutes to hit the target on heating. #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - // #define ENDSTOPPULLUP_XMAX - // #define ENDSTOPPULLUP_YMAX - // #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. @@ -382,10 +373,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 200 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -622,112 +618,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -735,51 +636,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -791,6 +651,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -860,6 +725,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 0e0d884647..8a8544d8f3 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -218,11 +156,7 @@ //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. #define AXIS_RELATIVE_MODES {false, false, false, false} -#ifdef CONFIG_STEPPERS_TOSHIBA -#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers -#else -#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) -#endif + //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. #define INVERT_X_STEP_PIN false #define INVERT_Y_STEP_PIN false @@ -237,12 +171,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -261,13 +195,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -313,12 +240,6 @@ #define PROGRESS_MSG_EXPIRE 0 // Enable this to show messages for MSG_TIME then hide them //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif #endif // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. @@ -342,16 +263,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -365,12 +276,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 2.85 #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -385,26 +292,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -456,86 +343,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index f59283266a..5bf60e4fb9 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -349,15 +349,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -406,10 +397,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 225 #define Z_MIN_POS MANUAL_Z_HOME_POS -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -648,112 +644,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -761,51 +662,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -817,6 +677,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -886,6 +751,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index e90728b9cb..dfeb082db6 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -216,9 +154,6 @@ #define Z_HOME_RETRACT_MM 3 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. -#ifdef SCARA - #define QUICK_HOME //SCARA needs Quickhome -#endif #define AXIS_RELATIVE_MODES {false, false, false, false} @@ -238,12 +173,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -251,9 +186,7 @@ // If defined the movements slow down when the look ahead buffer is only half full //#define SLOWDOWN -#ifdef SCARA - #undef SLOWDOWN -#endif + // Frequency limit // See nophead's blog for more info // Not working O @@ -264,13 +197,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -339,21 +265,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif - - #ifdef SCARA - #error BABYSTEPPING not implemented for SCARA yet. - #endif - #endif // extruder advance constant (s2/mm3) @@ -387,26 +298,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -456,81 +347,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index afe8ad85af..3d907c250c 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -319,15 +319,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -376,10 +367,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 200 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -615,112 +611,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -728,51 +629,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -784,6 +644,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -853,6 +718,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index cf18b95853..4fca69e2ba 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -89,54 +89,6 @@ //#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -237,12 +175,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -261,13 +199,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -313,12 +244,6 @@ #define PROGRESS_MSG_EXPIRE 0 // Enable this to show messages for MSG_TIME then hide them //#define PROGRESS_MSG_ONCE - #ifdef DOGLCD - #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time. - #endif - #ifdef FILAMENT_LCD_DISPLAY - #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both. - #endif #endif // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. @@ -342,16 +267,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -365,12 +280,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 1.75 #define STEPS_MM_E 100.47095761381482 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -385,26 +296,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -456,86 +347,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - #error "Bed Auto Leveling is still not compatible with Delta Kinematics." -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index e7cd86ff73..16d51f32fe 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -347,15 +347,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -406,10 +397,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -632,112 +628,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // in ultralcd.cpp@lcd_delta_calibrate_menu() // #define DELTA_CALIBRATION_MENU -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C PANELS + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -745,51 +646,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -801,6 +661,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -870,6 +735,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 7bb47dd176..2241f8c633 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -236,7 +174,7 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -256,13 +194,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -331,16 +262,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -354,12 +275,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 2.85 #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -374,26 +291,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -445,104 +342,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - - #if not defined(AUTO_BED_LEVELING_GRID) - #error "Only Grid Bed Auto Leveling is supported on Deltas." - #endif - - #if defined(Z_PROBE_SLED) - #error "You cannot use Z_PROBE_SLED together with DELTA." - #endif - - #if defined(Z_PROBE_REPEATABILITY_TEST) - #error "Z-probe repeatability test is not supported on Deltas yet." - #endif - -#endif - -#if defined(Z_PROBE_ALLEN_KEY) - #if !defined(AUTO_BED_LEVELING_GRID) || !defined(DELTA) - #error "Invalid use of Z_PROBE_ALLEN_KEY." - #endif -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 22db0e955a..97f1b28d76 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -348,15 +348,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. @@ -407,10 +398,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -634,112 +630,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // in ultralcd.cpp@lcd_delta_calibrate_menu() // #define DELTA_CALIBRATION_MENU -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -747,51 +648,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -803,6 +663,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -872,6 +737,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 76ff183099..29ce19fa10 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -236,7 +174,7 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -255,13 +193,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -330,16 +261,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -353,12 +274,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 2.85 #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -373,26 +290,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -444,104 +341,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== - -#if defined (ENABLE_AUTO_BED_LEVELING) && defined (DELTA) - - #if not defined(AUTO_BED_LEVELING_GRID) - #error "Only Grid Bed Auto Leveling is supported on Deltas." - #endif - - #if defined(Z_PROBE_SLED) - #error "You cannot use Z_PROBE_SLED together with DELTA." - #endif - - #if defined(Z_PROBE_REPEATABILITY_TEST) - #error "Z-probe repeatability test is not supported on Deltas yet." - #endif - -#endif - -#if defined(Z_PROBE_ALLEN_KEY) - #if !defined(AUTO_BED_LEVELING_GRID) || !defined(DELTA) - #error "Invalid use of Z_PROBE_ALLEN_KEY." - #endif -#endif - -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 187f71b09b..ec85772ef0 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -317,15 +317,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. @@ -374,10 +365,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 86 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -613,112 +609,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -726,51 +627,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -782,6 +642,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -851,6 +716,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index efb8943aa0..4575d4de20 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -235,12 +173,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif //Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -259,13 +197,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -335,16 +266,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -358,12 +279,8 @@ #ifdef ADVANCE #define EXTRUDER_ADVANCE_K .0 - #define D_FILAMENT 2.85 #define STEPS_MM_E 836 - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA) - #endif // ADVANCE // Arc interpretation settings: @@ -378,26 +295,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise //#define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -447,81 +344,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 3b3f2e58b6..9aa6616458 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -319,15 +319,6 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_ZMIN #endif -#ifdef ENDSTOPPULLUPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN -#endif - // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -376,10 +367,15 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_MAX_POS 120 #define Z_MIN_POS 0 -#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) -#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) -#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - +//=========================================================================== +//============================= Filament Runout Sensor ====================== +//=========================================================================== +//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament + // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. + // It is assumed that when logic high = filament available + // when logic low = filament ran out +//const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned +//#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== //============================= Bed Auto Leveling =========================== @@ -620,112 +616,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C //#define RA_CONTROL_PANEL -//automatic expansion -#if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 -#endif - -#if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 -#endif - -#if defined (PANEL_ONE) - #define SDSUPPORT - #define ULTIMAKERCONTROLLER -#endif - -#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - -#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL -#endif - -#if defined(REPRAPWORLD_KEYPAD) - #define NEWPANEL - #define ULTIPANEL -#endif -#if defined(RA_CONTROL_PANEL) - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander -#endif - -//I2C PANELS +/** + * I2C Panels + */ //#define LCD_I2C_SAINSMART_YWROBOT -#ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL -#endif // PANELOLU2 LCD with status LEDs, separate encoder and click inputs //#define LCD_I2C_PANELOLU2 -#ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - -#endif // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs //#define LCD_I2C_VIKI -#ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL -#endif // Shift register panels // --------------------- @@ -733,51 +634,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection //#define SAV_3DLCD -#ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL -#endif - - -#ifdef ULTIPANEL -// #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif -#else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif -#endif - -// default LCD contrast for dogm-like LCD displays -#ifdef DOGLCD -# ifndef DEFAULT_LCD_CONTRAST -# define DEFAULT_LCD_CONTRAST 32 -# endif -#endif // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN -// Temperature status LEDs that display the hotend and bet temperature. -// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. -// Otherwise the RED led is on. There is 1C hysteresis. -//#define TEMP_STAT_LEDS - // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. @@ -789,6 +649,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // at zero value, there are 128 effective control positions. #define SOFT_PWM_SCALE 0 +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 @@ -858,6 +723,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #include "Configuration_adv.h" +#include "Conditionals.h" +#include "SanityCheck.h" #include "thermistortables.h" -#endif //__CONFIGURATION_H +#endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index cfb2a49831..c08102c972 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -89,54 +89,6 @@ #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing - -//// AUTOSET LOCATIONS OF LIMIT SWITCHES -//// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS -#else //Set min/max homing switch positions based upon homing direction and min/max travel limits - //X axis - #if X_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * -0.5 - #else - #define X_HOME_POS X_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * 0.5 - #else - #define X_HOME_POS X_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //X_HOME_DIR == -1 - - //Y axis - #if Y_HOME_DIR == -1 - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * -0.5 - #else - #define Y_HOME_POS Y_MIN_POS - #endif //BED_CENTER_AT_0_0 - #else - #ifdef BED_CENTER_AT_0_0 - #define Y_HOME_POS Y_MAX_LENGTH * 0.5 - #else - #define Y_HOME_POS Y_MAX_POS - #endif //BED_CENTER_AT_0_0 - #endif //Y_HOME_DIR == -1 - - // Z axis - #if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used - #define Z_HOME_POS Z_MIN_POS - #else - #define Z_HOME_POS Z_MAX_POS - #endif //Z_HOME_DIR == -1 -#endif //End auto min/max positions -//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP - - //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // A single Z stepper driver is usually used to drive 2 stepper motors. @@ -146,26 +98,12 @@ // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. //#define Z_DUAL_STEPPER_DRIVERS -#ifdef Z_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS // Define if the two Y drives need to rotate in opposite directions #define INVERT_Y2_VS_Y_DIR true -#ifdef Y_DUAL_STEPPER_DRIVERS - #undef EXTRUDERS - #define EXTRUDERS 1 -#endif - -#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS) - #error "You cannot have dual drivers for both Y and Z" -#endif - // Enable this for dual x-carriage printers. // A dual x-carriage design has the advantage that the inactive extruder can be parked which // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage @@ -237,12 +175,12 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) #endif -//Comment to disable setting feedrate multiplier via encoder +// Comment to disable setting feedrate multiplier via encoder #ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define ULTIPANEL_FEEDMULTIPLY #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -261,13 +199,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#define MICROSTEP2 HIGH,LOW -#define MICROSTEP4 LOW,HIGH -#define MICROSTEP8 HIGH,HIGH -#define MICROSTEP16 HIGH,HIGH - // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] @@ -336,16 +267,6 @@ #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements - - #ifdef COREXY - #error BABYSTEPPING not implemented for COREXY yet. - #endif - - #ifdef DELTA - #ifdef BABYSTEP_XY - #error BABYSTEPPING only implemented for Z axis on deltabots. - #endif - #endif #endif // extruder advance constant (s2/mm3) @@ -379,26 +300,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st // be commented out otherwise #define SDCARDDETECTINVERTED -#ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED -#endif - -// Power Signal Control Definitions -// By default use ATX definition -#ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 -#endif -// 1 = ATX -#if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH -#endif -// 2 = X-Box 360 203W -#if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW -#endif - // Control heater 0 and heater 1 in parallel. //#define HEATERS_PARALLEL @@ -450,81 +351,4 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif -#ifdef FILAMENTCHANGEENABLE - #ifdef EXTRUDER_RUNOUT_PREVENT - #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE - #endif -#endif - -//=========================================================================== -//============================= Define Defines ============================ -//=========================================================================== -#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT - #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" -#endif - -#if EXTRUDERS > 1 && defined HEATERS_PARALLEL - #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" -#endif - -#if TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR -#endif -#if TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR -#endif -#if TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR -#endif -#if TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR -#endif -#if TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR -#endif -#if TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 -#endif -#if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 -#endif -#if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 -#endif -#if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 -#endif -#if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 -#endif -#if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 -#endif -#if TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif -#if TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif -#if TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif -#if TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif -#if TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - - -#endif //__CONFIGURATION_ADV_H +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/language.h b/Marlin/language.h index fe8145aa23..387e1e3ef0 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -238,8 +238,6 @@ #define STR_h3 "\263" #define STR_Deg "\337" #define STR_THERMOMETER "\002" - #elif defined(ULTRA_LCD) - #error You must enable either DISPLAY_CHARSET_HD44780_JAPAN or DISPLAY_CHARSET_HD44780_WESTERN for your LCD controller. #endif #endif /* diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 1c79ea3b40..9f09f727f0 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -89,7 +89,7 @@ static bool old_x_min_endstop = false, static bool check_endstops = true; volatile long count_position[NUM_AXIS] = { 0 }; -volatile signed char count_direction[NUM_AXIS] = { 1 }; +volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; //=========================================================================== diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index ed5593057c..c5ec723d9c 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -41,49 +41,13 @@ //================================== macros ================================= //=========================================================================== -#if EXTRUDERS > 4 - #error Unsupported number of extruders -#elif EXTRUDERS > 3 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 } -#elif EXTRUDERS > 2 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 } -#elif EXTRUDERS > 1 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 } -#else - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 } -#endif - -#define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN >= 0) -#define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN >= 0) -#define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN >= 0) -#define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN >= 0) -#define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN >= 0) -#define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN >= 0) -#define HAS_HEATER_0 (defined(HEATER_0_PIN) && HEATER_0_PIN >= 0) -#define HAS_HEATER_1 (defined(HEATER_1_PIN) && HEATER_1_PIN >= 0) -#define HAS_HEATER_2 (defined(HEATER_2_PIN) && HEATER_2_PIN >= 0) -#define HAS_HEATER_3 (defined(HEATER_3_PIN) && HEATER_3_PIN >= 0) -#define HAS_HEATER_BED (defined(HEATER_BED_PIN) && HEATER_BED_PIN >= 0) -#define HAS_AUTO_FAN_0 (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN >= 0) -#define HAS_AUTO_FAN_1 (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN >= 0) -#define HAS_AUTO_FAN_2 (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN >= 0) -#define HAS_AUTO_FAN_3 (defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN >= 0) -#define HAS_AUTO_FAN HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 -#define HAS_FAN (defined(FAN_PIN) && FAN_PIN >= 0) - -//=========================================================================== -//============================= public variables ============================ -//=========================================================================== - #ifdef K1 // Defined in Configuration.h in the PID settings #define K2 (1.0-K1) #endif -// Sampling period of the temperature routine -#ifdef PID_dT - #undef PID_dT -#endif -#define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0)) +//=========================================================================== +//============================= public variables ============================ +//=========================================================================== int target_temperature[EXTRUDERS] = { 0 }; int target_temperature_bed = 0; @@ -391,21 +355,6 @@ int getHeaterPower(int heater) { #if HAS_AUTO_FAN - #if HAS_FAN - #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN" - #endif - #if EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN" - #endif - #if EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN" - #endif - #if EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN" - #endif - #endif - void setExtruderAutoFanState(int pin, bool state) { unsigned char newFanSpeed = (state != 0) ? EXTRUDER_AUTO_FAN_SPEED : 0; @@ -482,42 +431,8 @@ void checkExtruderAutoFans() #endif // any extruder auto fan pins set // -// Error checking and Write Routines +// Temperature Error Handlers // -#if !HAS_HEATER_0 - #error HEATER_0_PIN not defined for this board -#endif -#define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v) -#if EXTRUDERS > 1 || defined(HEATERS_PARALLEL) - #if !HAS_HEATER_1 - #error HEATER_1_PIN not defined for this board - #endif - #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v) - #if EXTRUDERS > 2 - #if !HAS_HEATER_2 - #error HEATER_2_PIN not defined for this board - #endif - #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v) - #if EXTRUDERS > 3 - #if !HAS_HEATER_3 - #error HEATER_3_PIN not defined for this board - #endif - #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v) - #endif - #endif -#endif -#ifdef HEATERS_PARALLEL - #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); } -#else - #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v) -#endif -#if HAS_HEATER_BED - #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v) -#endif -#if HAS_FAN - #define WRITE_FAN(v) WRITE(FAN_PIN, v) -#endif - inline void _temp_error(int e, const char *msg1, const char *msg2) { if (!IsStopped()) { SERIAL_ERROR_START; diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 610b21ccb6..c32478ced8 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -1189,10 +1189,6 @@ void lcd_init() { WRITE(SHIFT_OUT,HIGH); WRITE(SHIFT_LD,HIGH); WRITE(SHIFT_EN,LOW); - #else - #ifdef ULTIPANEL - #error ULTIPANEL requires an encoder - #endif #endif // SR_LCD_2W_NL #endif//!NEWPANEL From 8ade04b78ef98c7d5caf786eccae484663148beb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 19 Mar 2015 22:25:05 -0700 Subject: [PATCH 02/18] Felix and Hephestos configs - Not sure why these are showing as all new --- .../Felix/Configuration_adv.h | 366 ++++++++++++++++++ .../Hephestos/Configuration_adv.h | 350 +++++++++++++++++ 2 files changed, 716 insertions(+) create mode 100644 Marlin/example_configurations/Felix/Configuration_adv.h create mode 100644 Marlin/example_configurations/Hephestos/Configuration_adv.h diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h new file mode 100644 index 0000000000..076b71ab21 --- /dev/null +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -0,0 +1,366 @@ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +#ifdef BED_LIMIT_SWITCHING + #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS +#endif +#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control + +//// Heating sanity check: +// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature +// If the temperature has not increased at the end of that period, the target temperature is set to zero. +// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature +// differ by at least 2x WATCH_TEMP_INCREASE +//#define WATCH_TEMP_PERIOD 40000 //40 seconds +//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds + +#ifdef PIDTEMP + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + #define PID_ADD_EXTRUSION_RATE + #ifdef PID_ADD_EXTRUSION_RATE + #define DEFAULT_Kc (1) //heating power=Kc*(e_speed) + #endif +#endif + + +//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. +//The maximum buffered steps/sec of the extruder motor are called "se". +//You enter the autotemp mode by a M109 S B F +// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp +// you exit the value by any M109 without F* +// Also, if the temperature is set to a value +// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results +// as long as it supports dual x-carriages. (M605 S0) +// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so +// that additional slicer support is not required. (M605 S1) +// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all +// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at +// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + +// This is the default power-up mode which can be later using M605. +#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 + +// Default settings in "Auto-park Mode" +#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder +#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + +// Default x offset in duplication mode (typically set to half print bed width) +#define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif //DUAL_X_CARRIAGE + +//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: +#define X_HOME_RETRACT_MM 5 +#define Y_HOME_RETRACT_MM 5 +#define Z_HOME_RETRACT_MM 3 +#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +//default stepper release if idle. Set to 0 to deactivate. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +// Feedrates for manual moves along X, Y, Z, E from panel +#ifdef ULTIPANEL +#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) +#endif + +//Comment to disable setting feedrate multiplier via encoder +#ifdef ULTIPANEL + #define ULTIPANEL_FEEDMULTIPLY +#endif + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] + +// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) +#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) + +// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro +//#define DIGIPOT_I2C +// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 +#define DIGIPOT_I2C_NUM_CHANNELS 8 +// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS +#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value +//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? +#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + +#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. +// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. +// using: +//#define MENU_ADDAUTOSTART + +// Show a progress bar on HD44780 LCDs for SD printing +//#define LCD_PROGRESS_BAR + +#ifdef LCD_PROGRESS_BAR + // Amount of time (ms) to show the bar + #define PROGRESS_BAR_BAR_TIME 2000 + // Amount of time (ms) to show the status message + #define PROGRESS_BAR_MSG_TIME 3000 + // Amount of time (ms) to retain the status message (0=forever) + #define PROGRESS_MSG_EXPIRE 0 + // Enable this to show messages for MSG_TIME then hide them + //#define PROGRESS_MSG_ONCE +#endif + +// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. +//#define USE_WATCHDOG + +#ifdef USE_WATCHDOG +// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. +// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. +// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. +//#define WATCHDOG_RESET_MANUAL +#endif + +// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. +//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + +// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process +// it can e.g. be used to change z-positions in the print startup phase in real-time +// does not respect endstops! +//#define BABYSTEPPING +#ifdef BABYSTEPPING + #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions + #define BABYSTEP_INVERT_Z false //true for inverse movements in Z + #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements +#endif + +// extruder advance constant (s2/mm3) +// +// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2 +// +// Hooke's law says: force = k * distance +// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant +// so: v ^ 2 is proportional to number of steps we advance the extruder +//#define ADVANCE + +#ifdef ADVANCE + #define EXTRUDER_ADVANCE_K .0 + #define D_FILAMENT 2.85 + #define STEPS_MM_E 836 +#endif // ADVANCE + +// Arc interpretation settings: +#define MM_PER_ARC_SEGMENT 1 +#define N_ARC_CORRECTION 25 + +const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement + +// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted +// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT +// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should +// be commented out otherwise +#define SDCARDDETECTINVERTED + +//#ifdef ULTIPANEL +// #undef SDCARDDETECTINVERTED +//#endif + +// Power Signal Control Definitions +// By default use ATX definition +#ifndef POWER_SUPPLY + #define POWER_SUPPLY 1 +#endif +// 1 = ATX +#if (POWER_SUPPLY == 1) + #define PS_ON_AWAKE LOW + #define PS_ON_ASLEEP HIGH +#endif +// 2 = X-Box 360 203W +#if (POWER_SUPPLY == 2) + #define PS_ON_AWAKE HIGH + #define PS_ON_ASLEEP LOW +#endif + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//=============================Buffers ============================ +//=========================================================================== + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. +#if defined SDSUPPORT + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + + +//The ASCII buffer for receiving from the serial: +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + + +// Firmware based and LCD controlled retract +// M207 and M208 can be used to define parameters for the retraction. +// The retraction can be called by the slicer using G10 and G11 +// until then, intended retractions can be detected by moves that only extrude and the direction. +// the moves are than replaced by the firmware controlled ones. + +// #define FWRETRACT //ONLY PARTIALLY TESTED +#ifdef FWRETRACT + #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt + #define RETRACT_LENGTH 3 //default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 //default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) +#endif + +//adds support for experimental filament exchange support M600; requires display +#ifdef ULTIPANEL + #define FILAMENTCHANGEENABLE + #ifdef FILAMENTCHANGEENABLE + #define FILAMENTCHANGE_XPOS 3 + #define FILAMENTCHANGE_YPOS 3 + #define FILAMENTCHANGE_ZADD 10 + #define FILAMENTCHANGE_FIRSTRETRACT -2 + #define FILAMENTCHANGE_FINALRETRACT -100 + #endif +#endif + +#endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h new file mode 100644 index 0000000000..713a786be8 --- /dev/null +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -0,0 +1,350 @@ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +#ifdef BED_LIMIT_SWITCHING + #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS +#endif +#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control + +//// Heating sanity check: +// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature +// If the temperature has not increased at the end of that period, the target temperature is set to zero. +// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature +// differ by at least 2x WATCH_TEMP_INCREASE +//#define WATCH_TEMP_PERIOD 40000 //40 seconds +//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds + +#ifdef PIDTEMP + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + #define PID_ADD_EXTRUSION_RATE + #ifdef PID_ADD_EXTRUSION_RATE + #define DEFAULT_Kc (1) //heating power=Kc*(e_speed) + #endif +#endif + + +//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. +//The maximum buffered steps/sec of the extruder motor are called "se". +//You enter the autotemp mode by a M109 S B F +// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp +// you exit the value by any M109 without F* +// Also, if the temperature is set to a value +// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results +// as long as it supports dual x-carriages. (M605 S0) +// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so +// that additional slicer support is not required. (M605 S1) +// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all +// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at +// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + +// This is the default power-up mode which can be later using M605. +#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 + +// Default settings in "Auto-park Mode" +#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder +#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + +// Default x offset in duplication mode (typically set to half print bed width) +#define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif //DUAL_X_CARRIAGE + +//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: +#define X_HOME_RETRACT_MM 5 +#define Y_HOME_RETRACT_MM 5 +#define Z_HOME_RETRACT_MM 2 +#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. + +#define AXIS_RELATIVE_MODES {false, false, false, false} +#ifdef CONFIG_STEPPERS_TOSHIBA +#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers +#else +#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) +#endif +//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +//default stepper release if idle. Set to 0 to deactivate. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +// Feedrates for manual moves along X, Y, Z, E from panel +#ifdef ULTIPANEL +#define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) +#endif + +//Comment to disable setting feedrate multiplier via encoder +#ifdef ULTIPANEL + #define ULTIPANEL_FEEDMULTIPLY +#endif + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] + +// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) +#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) + +// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro +//#define DIGIPOT_I2C +// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 +#define DIGIPOT_I2C_NUM_CHANNELS 8 +// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS +#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value +//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? +#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + +#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. +// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. +// using: +#define MENU_ADDAUTOSTART + +// Show a progress bar on HD44780 LCDs for SD printing +//#define LCD_PROGRESS_BAR + +#ifdef LCD_PROGRESS_BAR + // Amount of time (ms) to show the bar + #define PROGRESS_BAR_BAR_TIME 2000 + // Amount of time (ms) to show the status message + #define PROGRESS_BAR_MSG_TIME 3000 + // Amount of time (ms) to retain the status message (0=forever) + #define PROGRESS_MSG_EXPIRE 0 + // Enable this to show messages for MSG_TIME then hide them + //#define PROGRESS_MSG_ONCE +#endif + +// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. +//#define USE_WATCHDOG + +#ifdef USE_WATCHDOG +// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. +// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. +// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. +//#define WATCHDOG_RESET_MANUAL +#endif + +// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. +//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + +// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process +// it can e.g. be used to change z-positions in the print startup phase in real-time +// does not respect endstops! +//#define BABYSTEPPING +#ifdef BABYSTEPPING + #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions + #define BABYSTEP_INVERT_Z false //true for inverse movements in Z + #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements +#endif + +// extruder advance constant (s2/mm3) +// +// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2 +// +// Hooke's law says: force = k * distance +// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant +// so: v ^ 2 is proportional to number of steps we advance the extruder +//#define ADVANCE + +#ifdef ADVANCE + #define EXTRUDER_ADVANCE_K .0 + #define D_FILAMENT 1.75 + #define STEPS_MM_E 100.47095761381482 +#endif // ADVANCE + +// Arc interpretation settings: +#define MM_PER_ARC_SEGMENT 1 +#define N_ARC_CORRECTION 25 + +const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement + +// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted +// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT +// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should +// be commented out otherwise +#define SDCARDDETECTINVERTED + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//=============================Buffers ============================ +//=========================================================================== + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. +#if defined SDSUPPORT + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + + +//The ASCII buffer for receiving from the serial: +#define MAX_CMD_SIZE 96 +#define BUFSIZE 5 + + +// Firmware based and LCD controlled retract +// M207 and M208 can be used to define parameters for the retraction. +// The retraction can be called by the slicer using G10 and G11 +// until then, intended retractions can be detected by moves that only extrude and the direction. +// the moves are than replaced by the firmware controlled ones. + +// #define FWRETRACT //ONLY PARTIALLY TESTED +#ifdef FWRETRACT + #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt + #define RETRACT_LENGTH 3 //default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 80*60 //default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 //default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering) + //#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s) +#endif + +//adds support for experimental filament exchange support M600; requires display +#ifdef ULTIPANEL + #define FILAMENTCHANGEENABLE + #ifdef FILAMENTCHANGEENABLE + #define FILAMENTCHANGE_XPOS 3 + #define FILAMENTCHANGE_YPOS 3 + #define FILAMENTCHANGE_ZADD 10 + #define FILAMENTCHANGE_FIRSTRETRACT -2 + #define FILAMENTCHANGE_FINALRETRACT -100 + #endif +#endif + +#endif //CONFIGURATION_ADV_H From 33c7c6e11d0904e0e6710178aa24a4ff3a9bf655 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 20 Mar 2015 01:27:14 -0700 Subject: [PATCH 03/18] Conditionals.h requires Arduino.h --- Marlin/Conditionals.h | 1 + Marlin/SanityCheck.h | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 6e62bf7eed..bf1886277c 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -5,6 +5,7 @@ #ifndef CONDITIONALS_H #define CONDITIONALS_H + #include "Arduino.h" #include "pins.h" /** diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index cad6353aef..1a07f6b44d 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -111,13 +111,13 @@ // Make sure probing points are reachable #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X - #error "The given LEFT_PROBE_BED_POSITION can't be reached by the probe." + #error The given LEFT_PROBE_BED_POSITION can't be reached by the probe. #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X - #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the probe." + #error The given RIGHT_PROBE_BED_POSITION can't be reached by the probe. #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y - #error "The given FRONT_PROBE_BED_POSITION can't be reached by the probe." + #error The given FRONT_PROBE_BED_POSITION can't be reached by the probe. #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y - #error "The given BACK_PROBE_BED_POSITION can't be reached by the probe." + #error The given BACK_PROBE_BED_POSITION can't be reached by the probe. #endif #define PROBE_SIZE_X (X_PROBE_OFFSET_FROM_EXTRUDER * (AUTO_BED_LEVELING_GRID_POINTS-1)) From b6d381f8636670ed2500cb7c4b026cfcbcb4ea8b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 20 Mar 2015 02:50:28 -0700 Subject: [PATCH 04/18] Divide up Conditionals to get LCD items early --- Marlin/Conditionals.h | 164 ++---------------- Marlin/Conditionals_lcd.h | 155 +++++++++++++++++ Marlin/Configuration.h | 1 + Marlin/Configuration_adv.h | 77 ++++---- Marlin/Marlin.h | 56 +++--- Marlin/Sd2PinMap.h | 5 +- Marlin/configurator/config/Configuration.h | 1 + .../configurator/config/Configuration_adv.h | 15 +- .../Felix/Configuration.h | 1 + .../Felix/Configuration_DUAL.h | 1 + .../Felix/Configuration_adv.h | 15 +- .../Hephestos/Configuration.h | 1 + .../Hephestos/Configuration_adv.h | 15 +- .../K8200/Configuration.h | 1 + .../K8200/Configuration_adv.h | 15 +- .../SCARA/Configuration.h | 1 + .../SCARA/Configuration_adv.h | 15 +- .../WITBOX/Configuration.h | 1 + .../WITBOX/Configuration_adv.h | 15 +- .../delta/generic/Configuration.h | 1 + .../delta/generic/Configuration_adv.h | 8 +- .../delta/kossel_mini/Configuration.h | 1 + .../delta/kossel_mini/Configuration_adv.h | 8 +- .../makibox/Configuration.h | 1 + .../makibox/Configuration_adv.h | 15 +- .../tvrrug/Round2/Configuration.h | 1 + .../tvrrug/Round2/Configuration_adv.h | 15 +- Marlin/pins.h | 2 - Marlin/ultralcd.cpp | 1 - Marlin/ultralcd.h | 25 ++- 30 files changed, 300 insertions(+), 333 deletions(-) create mode 100644 Marlin/Conditionals_lcd.h diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index bf1886277c..d896880622 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -5,7 +5,16 @@ #ifndef CONDITIONALS_H #define CONDITIONALS_H - #include "Arduino.h" + #ifndef AT90USB + #define HardwareSerial_h // trick to disable the standard HWserial + #endif + + #if (ARDUINO >= 100) + #include "Arduino.h" + #else + #include "WProgram.h" + #endif + #include "pins.h" /** @@ -39,159 +48,6 @@ #define QUICK_HOME //SCARA needs Quickhome #endif - - /** - * LCD Controllers - */ - - #if defined (MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define ULTIPANEL - #define NEWPANEL - #define DEFAULT_LCD_CONTRAST 17 - #endif - - #if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - #ifdef PANEL_ONE - #define SDSUPPORT - #define ULTIMAKERCONTROLLER - #endif - - #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER - #endif - - #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL - #endif - - #ifdef REPRAPWORLD_KEYPAD - #define NEWPANEL - #define ULTIPANEL - #endif - - #ifdef RA_CONTROL_PANEL - #define ULTIPANEL - #define NEWPANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #endif - - /** - * I2C PANELS - */ - - #ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define NEWPANEL - #define ULTIPANEL - #endif - - // PANELOLU2 LCD with status LEDs, separate encoder and click inputs - #ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - #define NEWPANEL - #define ULTIPANEL - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - - #endif - - // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs - #ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define NEWPANEL - #define ULTIPANEL - #endif - - // Shift register panels - // --------------------- - // 2 wire Non-latching LCD SR from: - // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection - - #ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define NEWPANEL - #define ULTIPANEL - #endif - - - #ifdef ULTIPANEL - #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif - #else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif - #endif - - /** - * Default LCD contrast for dogm-like LCD displays - */ - #if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST) - #define DEFAULT_LCD_CONTRAST 32 - #endif - /** * AUTOSET LOCATIONS OF LIMIT SWITCHES * Added by ZetaPhoenix 09-15-2012 diff --git a/Marlin/Conditionals_lcd.h b/Marlin/Conditionals_lcd.h new file mode 100644 index 0000000000..6e63934b11 --- /dev/null +++ b/Marlin/Conditionals_lcd.h @@ -0,0 +1,155 @@ +/** + * Conditionals_lcd.h + * LCD-oriented defines that depend on configuration. + */ +#ifndef CONDITIONALS_LCD_H + #define CONDITIONALS_LCD_H + + #if defined(MAKRPANEL) + #define DOGLCD + #define SDSUPPORT + #define DEFAULT_LCD_CONTRAST 17 + #define ULTIPANEL + #define NEWPANEL + #endif + + #if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + #ifdef PANEL_ONE + #define SDSUPPORT + #define ULTIMAKERCONTROLLER + #endif + + #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + #define DOGLCD + #define U8GLIB_ST7920 + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #endif + + #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) + #define ULTIPANEL + #define NEWPANEL + #endif + + #ifdef REPRAPWORLD_KEYPAD + #define ULTIPANEL + #define NEWPANEL + #endif + + #ifdef RA_CONTROL_PANEL + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTIPANEL + #define NEWPANEL + #endif + + /** + * I2C PANELS + */ + + #ifdef LCD_I2C_SAINSMART_YWROBOT + // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) + // Make sure it is placed in the Arduino libraries directory. + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTIPANEL + #define NEWPANEL + #endif + + // PANELOLU2 LCD with status LEDs, separate encoder and click inputs + #ifdef LCD_I2C_PANELOLU2 + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) + // Note: The PANELOLU2 encoder click input can either be directly connected to a pin + // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD + + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 4 + #endif + + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + #ifdef LCD_USE_I2C_BUZZER + #define LCD_FEEDBACK_FREQUENCY_HZ 1000 + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 + #endif + + #define ULTIPANEL + #define NEWPANEL + #endif + + // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs + #ifdef LCD_I2C_VIKI + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // Note: The pause/stop/resume LCD button pin should be connected to the Arduino + // BTN_ENC pin (or set BTN_ENC to -1 if not used) + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define ULTIPANEL + #define NEWPANEL + #endif + + // Shift register panels + // --------------------- + // 2 wire Non-latching LCD SR from: + // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection + + #ifdef SAV_3DLCD + #define SR_LCD_2W_NL // Non latching 2 wire shiftregister + #define ULTIPANEL + #define NEWPANEL + #endif + + + #ifdef ULTIPANEL + #define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the DOG graphic display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif + #else //no panel but just LCD + #ifdef ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif + #endif + #endif + + /** + * Default LCD contrast for dogm-like LCD displays + */ + #if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST) + #define DEFAULT_LCD_CONTRAST 32 + #endif + +#endif //CONDITIONALS_LCD_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 3c5d92deee..bb753eaa43 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -713,6 +713,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 42cf4d28b2..0435a02c49 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -110,41 +110,41 @@ // allowing faster printing speeds. //#define DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE -// Configuration for second X-carriage -// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; -// the second x-carriage always homes to the maximum endstop. -#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage -#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed -#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position -#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position - // However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. + // Configuration for second X-carriage + // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; + // the second x-carriage always homes to the maximum endstop. + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. -// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h) -#define X2_ENABLE_PIN 29 -#define X2_STEP_PIN 25 -#define X2_DIR_PIN 23 + // Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h) + #define X2_ENABLE_PIN 29 + #define X2_STEP_PIN 25 + #define X2_DIR_PIN 23 -// There are a few selectable movement modes for dual x-carriages using M605 S -// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results -// as long as it supports dual x-carriages. (M605 S0) -// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so -// that additional slicer support is not required. (M605 S1) -// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all -// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at -// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) -// This is the default power-up mode which can be later using M605. -#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE 0 -// Default settings in "Auto-park Mode" -#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder -#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder -// Default x offset in duplication mode (typically set to half print bed width) -#define DEFAULT_DUPLICATION_X_OFFSET 100 + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 #endif //DUAL_X_CARRIAGE @@ -163,20 +163,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -301,7 +296,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st // The number of linear motions that can be in the plan at any give time. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. -#if defined SDSUPPORT +#ifdef SDSUPPORT #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #else #define BLOCK_BUFFER_SIZE 16 // maximize block buffer @@ -331,9 +326,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 44a85f78df..7cabcbca03 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -20,11 +20,6 @@ #include "fastio.h" #include "Configuration.h" -#include "pins.h" - -#ifndef AT90USB - #define HardwareSerial_h // trick to disable the standard HWserial -#endif #if (ARDUINO >= 100) #include "Arduino.h" @@ -191,17 +186,17 @@ void ClearToSend(); void get_coordinates(); #ifdef DELTA -void calculate_delta(float cartesian[3]); + void calculate_delta(float cartesian[3]); #ifdef ENABLE_AUTO_BED_LEVELING - extern int delta_grid_spacing[2]; - void adjust_delta(float cartesian[3]); + extern int delta_grid_spacing[2]; + void adjust_delta(float cartesian[3]); #endif -extern float delta[3]; -void prepare_move_raw(); + extern float delta[3]; + void prepare_move_raw(); #endif #ifdef SCARA -void calculate_delta(float cartesian[3]); -void calculate_SCARA_forward_Transform(float f_scara[3]); + void calculate_delta(float cartesian[3]); + void calculate_SCARA_forward_Transform(float f_scara[3]); #endif void reset_bed_level(); void prepare_move(); @@ -209,7 +204,7 @@ void kill(); void Stop(); #ifdef FILAMENT_RUNOUT_SENSOR -void filrunout(); + void filrunout(); #endif bool IsStopped(); @@ -223,7 +218,7 @@ void clamp_to_software_endstops(float target[3]); void refresh_cmd_timeout(void); #ifdef FAST_PWM_FAN -void setPwmFrequency(uint8_t pin, int val); + void setPwmFrequency(uint8_t pin, int val); #endif #ifndef CRITICAL_SECTION_START @@ -242,14 +237,14 @@ extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional extern float current_position[NUM_AXIS] ; extern float add_homing[3]; #ifdef DELTA -extern float endstop_adj[3]; -extern float delta_radius; -extern float delta_diagonal_rod; -extern float delta_segments_per_second; -void recalc_delta_settings(float radius, float diagonal_rod); + extern float endstop_adj[3]; + extern float delta_radius; + extern float delta_diagonal_rod; + extern float delta_segments_per_second; + void recalc_delta_settings(float radius, float diagonal_rod); #endif #ifdef SCARA -extern float axis_scaling[3]; // Build size scaling + extern float axis_scaling[3]; // Build size scaling #endif extern float min_pos[3]; extern float max_pos[3]; @@ -257,12 +252,12 @@ extern bool axis_known_position[3]; extern float zprobe_zoffset; extern int fanSpeed; #ifdef BARICUDA -extern int ValvePressure; -extern int EtoPPressure; + extern int ValvePressure; + extern int EtoPPressure; #endif #ifdef FAN_SOFT_PWM -extern unsigned char fanSpeedSoftPwm; + extern unsigned char fanSpeedSoftPwm; #endif #ifdef FILAMENT_SENSOR @@ -276,10 +271,10 @@ extern unsigned char fanSpeedSoftPwm; #endif #ifdef FWRETRACT -extern bool autoretract_enabled; -extern bool retracted[EXTRUDERS]; -extern float retract_length, retract_length_swap, retract_feedrate, retract_zlift; -extern float retract_recover_length, retract_recover_length_swap, retract_recover_feedrate; + extern bool autoretract_enabled; + extern bool retracted[EXTRUDERS]; + extern float retract_length, retract_length_swap, retract_feedrate, retract_zlift; + extern float retract_recover_length, retract_recover_length_swap, retract_recover_feedrate; #endif extern unsigned long starttime; @@ -289,11 +284,10 @@ extern unsigned long stoptime; extern uint8_t active_extruder; #ifdef DIGIPOT_I2C -extern void digipot_i2c_set_current( int channel, float current ); -extern void digipot_i2c_init(); -#endif - + extern void digipot_i2c_set_current( int channel, float current ); + extern void digipot_i2c_init(); #endif extern void calculate_volumetric_multipliers(); +#endif //MARLIN_H diff --git a/Marlin/Sd2PinMap.h b/Marlin/Sd2PinMap.h index 0556bd301c..a94b9b3dc0 100644 --- a/Marlin/Sd2PinMap.h +++ b/Marlin/Sd2PinMap.h @@ -33,9 +33,7 @@ struct pin_map_t { uint8_t bit; }; //------------------------------------------------------------------------------ -#if defined(__AVR_ATmega1280__)\ -|| defined(__AVR_ATmega2560__) -// Mega +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) // Mega // Two Wire (aka I2C) ports uint8_t const SDA_PIN = 20; // D1 @@ -43,6 +41,7 @@ uint8_t const SCL_PIN = 21; // D0 #undef MOSI_PIN #undef MISO_PIN +#undef SCK_PIN // SPI port uint8_t const SS_PIN = 53; // B0 uint8_t const MOSI_PIN = 51; // B2 diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 04de471cd1..8fc198a226 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -756,6 +756,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h index 24243a48d9..6e4941a764 100644 --- a/Marlin/configurator/config/Configuration_adv.h +++ b/Marlin/configurator/config/Configuration_adv.h @@ -180,7 +180,7 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate @@ -188,14 +188,9 @@ // @section lcd -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // @section extras @@ -368,9 +363,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 03a09c6dbd..ebd49f81b5 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -692,6 +692,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index 37c797882f..5e990df03a 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -689,6 +689,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define FILAMENT_LCD_DISPLAY +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 076b71ab21..0e93dca49c 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -163,20 +163,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -351,9 +346,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 481ece7bb9..2220f7511a 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -720,6 +720,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 713a786be8..53819e677c 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -167,20 +167,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL -#define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -335,9 +330,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index f3e063e34f..9400e4e49c 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -724,6 +724,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 8a8544d8f3..141f396936 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -163,20 +163,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -331,9 +326,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 5bf60e4fb9..7aafbf61d0 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -750,6 +750,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index dfeb082db6..391c8058f6 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -165,20 +165,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 240 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -335,9 +330,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 3d907c250c..9654fa00d5 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -717,6 +717,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 4fca69e2ba..53819e677c 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -167,20 +167,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -335,9 +330,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 16d51f32fe..e3c543b144 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -734,6 +734,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 2241f8c633..b2e1c86d4d 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -166,7 +166,7 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate @@ -174,7 +174,7 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -330,9 +330,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 97f1b28d76..5874d0475a 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -736,6 +736,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 29ce19fa10..1ba4861ead 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -166,7 +166,7 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate @@ -174,7 +174,7 @@ // Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -329,9 +329,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index ec85772ef0..83a5152d0f 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -715,6 +715,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 4575d4de20..eea93e43db 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -165,20 +165,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -//Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -332,9 +327,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 9aa6616458..09944999cc 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -722,6 +722,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of +#include "Conditionals_lcd.h" #include "Configuration_adv.h" #include "Conditionals.h" #include "SanityCheck.h" diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index c08102c972..7fdc38b83c 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -167,20 +167,15 @@ #define INVERT_Z_STEP_PIN false #define INVERT_E_STEP_PIN false -//default stepper release if idle. Set to 0 to deactivate. +// Default stepper release if idle. Set to 0 to deactivate. #define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -// Feedrates for manual moves along X, Y, Z, E from panel #ifdef ULTIPANEL - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min) -#endif - -// Comment to disable setting feedrate multiplier via encoder -#ifdef ULTIPANEL - #define ULTIPANEL_FEEDMULTIPLY + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif // minimum time in microseconds that a movement needs to take if the buffer is emptied. @@ -339,9 +334,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) #endif -//adds support for experimental filament exchange support M600; requires display +// Add support for experimental filament exchange support M600; requires display #ifdef ULTIPANEL - #define FILAMENTCHANGEENABLE + //#define FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE #define FILAMENTCHANGE_XPOS 3 #define FILAMENTCHANGE_YPOS 3 diff --git a/Marlin/pins.h b/Marlin/pins.h index 38b1274f73..88c5cc78cb 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -5,8 +5,6 @@ #ifndef PINS_H #define PINS_H -#include "boards.h" - // Preset optional pins #define X_MS1_PIN -1 #define X_MS2_PIN -1 diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index c32478ced8..17712ce062 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -1,4 +1,3 @@ -#include "temperature.h" #include "ultralcd.h" #ifdef ULTRA_LCD #include "Marlin.h" diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 9d89f514de..befe8fd1e2 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -14,10 +14,10 @@ void lcd_reset_alert_level(); bool lcd_detected(void); -#ifdef DOGLCD - extern int lcd_contrast; - void lcd_setcontrast(uint8_t value); -#endif + #ifdef DOGLCD + extern int lcd_contrast; + void lcd_setcontrast(uint8_t value); + #endif static unsigned char blink = 0; // Variable for visualization of fan rotation in GLCD @@ -28,27 +28,26 @@ #define LCD_TIMEOUT_TO_STATUS 15000 #ifdef ULTIPANEL - void lcd_buttons_update(); - extern volatile uint8_t buttons; //the last checked buttons in a bit array. - #ifdef REPRAPWORLD_KEYPAD - extern volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shift register values - #endif + void lcd_buttons_update(); + extern volatile uint8_t buttons; //the last checked buttons in a bit array. + #ifdef REPRAPWORLD_KEYPAD + extern volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shift register values + #endif #else - FORCE_INLINE void lcd_buttons_update() {} + FORCE_INLINE void lcd_buttons_update() {} #endif extern int plaPreheatHotendTemp; extern int plaPreheatHPBTemp; extern int plaPreheatFanSpeed; - extern int absPreheatHotendTemp; extern int absPreheatHPBTemp; extern int absPreheatFanSpeed; - + extern bool cancel_heatup; #ifdef FILAMENT_LCD_DISPLAY - extern unsigned long message_millis; + extern unsigned long message_millis; #endif void lcd_buzz(long duration,uint16_t freq); From a1c240b0a4e62b91d92d56ecc32c262213ce3431 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 20 Mar 2015 04:04:45 -0700 Subject: [PATCH 05/18] Delta supports some auto bed leveling options --- Marlin/SanityCheck.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 1a07f6b44d..a8937b44ba 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -47,13 +47,6 @@ #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE. #endif - /** - * Auto Bed Leveling and Delta - */ - #if defined(ENABLE_AUTO_BED_LEVELING) && defined(DELTA) - #error Bed Auto Leveling is still not compatible with Delta Kinematics. - #endif - /** * Options only for EXTRUDERS == 1 */ @@ -181,7 +174,7 @@ /** * Delta has limited bed leveling options */ - #if defined(DELTA) + #ifdef DELTA #ifdef ENABLE_AUTO_BED_LEVELING From 13fbf42d95251eb3ccc36449a8056de8cd8d228a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 20 Mar 2015 20:42:49 -0700 Subject: [PATCH 06/18] Cleanup of planner code - Use named axis indexes, `X_AXIS` etc. - Replace `block.steps_A` with block.steps[A]` - Replace `A_segment_time` with `segment_time[A]` - Add `A_AXIS`, `B_AXIS` for `COREXY` axes - Conditional compile based on `EXTRUDERS` - Add BLOCK_MOD macro for planner block indexes - Apply coding standards to `planner.h` and `planner.cpp` - Small optimizations of planner code - Update `stepper.cpp` for new `block` struct - Replace `memcpy` with loops, let the compiler unroll them - Make `movesplanned` into an inline function --- Marlin/Marlin.h | 4 +- Marlin/planner.cpp | 1142 ++++++++++++++++++++------------------------ Marlin/planner.h | 117 ++--- Marlin/stepper.cpp | 107 ++--- 4 files changed, 616 insertions(+), 754 deletions(-) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 44a85f78df..7e426d9c7a 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -183,7 +183,7 @@ void manage_inactivity(bool ignore_stepper_queue=false); #define disable_e3() /* nothing */ #endif -enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5}; +enum AxisEnum {X_AXIS=0, Y_AXIS=1, A_AXIS=0, B_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5}; //X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots. void FlushSerialRequestResend(); @@ -270,7 +270,7 @@ extern unsigned char fanSpeedSoftPwm; extern bool filament_sensor; //indicates that filament sensor readings should control extrusion extern float filament_width_meas; //holds the filament diameter as accurately measured extern signed char measurement_delay[]; //ring buffer to delay measurement - extern int delay_index1, delay_index2; //index into ring buffer + extern int delay_index1, delay_index2; //ring buffer index. used by planner, temperature, and main code extern float delay_dist; //delay distance counter extern int meas_delay_cm; //delay distance #endif diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 316c0de2f9..a105548b47 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -77,12 +77,12 @@ float mintravelfeedrate; unsigned long axis_steps_per_sqr_second[NUM_AXIS]; #ifdef ENABLE_AUTO_BED_LEVELING -// this holds the required transform to compensate for bed level -matrix_3x3 plan_bed_level_matrix = { - 1.0, 0.0, 0.0, - 0.0, 1.0, 0.0, - 0.0, 0.0, 1.0 -}; + // this holds the required transform to compensate for bed level + matrix_3x3 plan_bed_level_matrix = { + 1.0, 0.0, 0.0, + 0.0, 1.0, 0.0, + 0.0, 0.0, 1.0 + }; #endif // #ifdef ENABLE_AUTO_BED_LEVELING // The current position of the tool in absolute steps @@ -91,10 +91,10 @@ static float previous_speed[NUM_AXIS]; // Speed of previous path line segment static float previous_nominal_speed; // Nominal speed of previous path line segment #ifdef AUTOTEMP -float autotemp_max=250; -float autotemp_min=210; -float autotemp_factor=0.1; -bool autotemp_enabled=false; + float autotemp_max = 250; + float autotemp_min = 210; + float autotemp_factor = 0.1; + bool autotemp_enabled = false; #endif unsigned char g_uc_extruder_last_move[4] = {0,0,0,0}; @@ -110,55 +110,35 @@ volatile unsigned char block_buffer_tail; // Index of the block to pro //=============================private variables ============================ //=========================================================================== #ifdef PREVENT_DANGEROUS_EXTRUDE -float extrude_min_temp=EXTRUDE_MINTEMP; + float extrude_min_temp = EXTRUDE_MINTEMP; #endif #ifdef XY_FREQUENCY_LIMIT -#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT) -// Used for the frequency limit -static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations -static long x_segment_time[3]={MAX_FREQ_TIME + 1,0,0}; // Segment times (in us). Used for speed calculations -static long y_segment_time[3]={MAX_FREQ_TIME + 1,0,0}; + // Used for the frequency limit + #define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT) + // Old direction bits. Used for speed calculations + static unsigned char old_direction_bits = 0; + // Segment times (in µs). Used for speed calculations + static long axis_segment_time[2][3] = { {MAX_FREQ_TIME+1,0,0}, {MAX_FREQ_TIME+1,0,0} }; #endif #ifdef FILAMENT_SENSOR - static char meas_sample; //temporary variable to hold filament measurement sample + static char meas_sample; //temporary variable to hold filament measurement sample #endif -// Returns the index of the next block in the ring buffer -// NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication. -static int8_t next_block_index(int8_t block_index) { - block_index++; - if (block_index == BLOCK_BUFFER_SIZE) { - block_index = 0; - } - return(block_index); -} - - -// Returns the index of the previous block in the ring buffer -static int8_t prev_block_index(int8_t block_index) { - if (block_index == 0) { - block_index = BLOCK_BUFFER_SIZE; - } - block_index--; - return(block_index); -} +// Get the next / previous index of the next block in the ring buffer +// NOTE: Using & here (not %) because BLOCK_BUFFER_SIZE is always a power of 2 +FORCE_INLINE int8_t next_block_index(int8_t block_index) { return BLOCK_MOD(block_index + 1); } +FORCE_INLINE int8_t prev_block_index(int8_t block_index) { return BLOCK_MOD(block_index - 1); } //=========================================================================== -//=============================functions ============================ +//================================ Functions ================================ //=========================================================================== // Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the // given acceleration: -FORCE_INLINE float estimate_acceleration_distance(float initial_rate, float target_rate, float acceleration) -{ - if (acceleration!=0) { - return((target_rate*target_rate-initial_rate*initial_rate)/ - (2.0*acceleration)); - } - else { - return 0.0; // acceleration was 0, set acceleration distance to 0 - } +FORCE_INLINE float estimate_acceleration_distance(float initial_rate, float target_rate, float acceleration) { + if (acceleration == 0) return 0; // acceleration was 0, set acceleration distance to 0 + return (target_rate * target_rate - initial_rate * initial_rate) / (acceleration * 2); } // This function gives you the point at which you must start braking (at the rate of -acceleration) if @@ -166,67 +146,55 @@ FORCE_INLINE float estimate_acceleration_distance(float initial_rate, float targ // a total travel of distance. This can be used to compute the intersection point between acceleration and // deceleration in the cases where the trapezoid has no plateau (i.e. never reaches maximum speed) -FORCE_INLINE float intersection_distance(float initial_rate, float final_rate, float acceleration, float distance) -{ - if (acceleration!=0) { - return((2.0*acceleration*distance-initial_rate*initial_rate+final_rate*final_rate)/ - (4.0*acceleration) ); - } - else { - return 0.0; // acceleration was 0, set intersection distance to 0 - } +FORCE_INLINE float intersection_distance(float initial_rate, float final_rate, float acceleration, float distance) { + if (acceleration == 0) return 0; // acceleration was 0, set intersection distance to 0 + return (acceleration * 2 * distance - initial_rate * initial_rate + final_rate * final_rate) / (acceleration * 4); } // Calculates trapezoid parameters so that the entry- and exit-speed is compensated by the provided factors. void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exit_factor) { - unsigned long initial_rate = ceil(block->nominal_rate*entry_factor); // (step/min) - unsigned long final_rate = ceil(block->nominal_rate*exit_factor); // (step/min) + unsigned long initial_rate = ceil(block->nominal_rate * entry_factor); // (step/min) + unsigned long final_rate = ceil(block->nominal_rate * exit_factor); // (step/min) // Limit minimal step rate (Otherwise the timer will overflow.) - if(initial_rate <120) { - initial_rate=120; - } - if(final_rate < 120) { - final_rate=120; - } + if (initial_rate < 120) initial_rate = 120; + if (final_rate < 120) final_rate = 120; long acceleration = block->acceleration_st; - int32_t accelerate_steps = - ceil(estimate_acceleration_distance(initial_rate, block->nominal_rate, acceleration)); - int32_t decelerate_steps = - floor(estimate_acceleration_distance(block->nominal_rate, final_rate, -acceleration)); + int32_t accelerate_steps = ceil(estimate_acceleration_distance(initial_rate, block->nominal_rate, acceleration)); + int32_t decelerate_steps = floor(estimate_acceleration_distance(block->nominal_rate, final_rate, -acceleration)); // Calculate the size of Plateau of Nominal Rate. - int32_t plateau_steps = block->step_event_count-accelerate_steps-decelerate_steps; + int32_t plateau_steps = block->step_event_count - accelerate_steps - decelerate_steps; // Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will // have to use intersection_distance() to calculate when to abort acceleration and start braking // in order to reach the final_rate exactly at the end of this block. if (plateau_steps < 0) { accelerate_steps = ceil(intersection_distance(initial_rate, final_rate, acceleration, block->step_event_count)); - accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off - accelerate_steps = min((uint32_t)accelerate_steps,block->step_event_count);//(We can cast here to unsigned, because the above line ensures that we are above zero) + accelerate_steps = max(accelerate_steps, 0); // Check limits due to numerical round-off + accelerate_steps = min((uint32_t)accelerate_steps, block->step_event_count);//(We can cast here to unsigned, because the above line ensures that we are above zero) plateau_steps = 0; } #ifdef ADVANCE - volatile long initial_advance = block->advance*entry_factor*entry_factor; - volatile long final_advance = block->advance*exit_factor*exit_factor; + volatile long initial_advance = block->advance * entry_factor * entry_factor; + volatile long final_advance = block->advance * exit_factor * exit_factor; #endif // ADVANCE // block->accelerate_until = accelerate_steps; // block->decelerate_after = accelerate_steps+plateau_steps; CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section - if(block->busy == false) { // Don't update variables if block is busy. + if (!block->busy) { // Don't update variables if block is busy. block->accelerate_until = accelerate_steps; block->decelerate_after = accelerate_steps+plateau_steps; block->initial_rate = initial_rate; block->final_rate = final_rate; -#ifdef ADVANCE - block->initial_advance = initial_advance; - block->final_advance = final_advance; -#endif //ADVANCE + #ifdef ADVANCE + block->initial_advance = initial_advance; + block->final_advance = final_advance; + #endif } CRITICAL_SECTION_END; } @@ -234,7 +202,7 @@ void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exi // Calculates the maximum allowable speed at this point when you must be able to reach target_velocity using the // acceleration within the allotted distance. FORCE_INLINE float max_allowable_speed(float acceleration, float target_velocity, float distance) { - return sqrt(target_velocity*target_velocity-2*acceleration*distance); + return sqrt(target_velocity * target_velocity - 2 * acceleration * distance); } // "Junction jerk" in this context is the immediate change in speed at the junction of two blocks. @@ -248,9 +216,7 @@ FORCE_INLINE float max_allowable_speed(float acceleration, float target_velocity // The kernel called by planner_recalculate() when scanning the plan from last to first entry. void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *next) { - if(!current) { - return; - } + if (!current) return; if (next) { // If entry speed is already at the maximum entry speed, no need to recheck. Block is cruising. @@ -260,9 +226,9 @@ void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *n // If nominal length true, max junction speed is guaranteed to be reached. Only compute // for max allowable speed if block is decelerating and nominal length is false. - if ((!current->nominal_length_flag) && (current->max_entry_speed > next->entry_speed)) { - current->entry_speed = min( current->max_entry_speed, - max_allowable_speed(-current->acceleration,next->entry_speed,current->millimeters)); + if (!current->nominal_length_flag && current->max_entry_speed > next->entry_speed) { + current->entry_speed = min(current->max_entry_speed, + max_allowable_speed(-current->acceleration, next->entry_speed, current->millimeters)); } else { current->entry_speed = current->max_entry_speed; @@ -280,15 +246,14 @@ void planner_reverse_pass() { //Make a local copy of block_buffer_tail, because the interrupt can alter it CRITICAL_SECTION_START; - unsigned char tail = block_buffer_tail; + unsigned char tail = block_buffer_tail; CRITICAL_SECTION_END - if(((block_buffer_head-tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) { - block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1); - block_t *block[3] = { - NULL, NULL, NULL }; - while(block_index != tail) { - block_index = prev_block_index(block_index); + if (BLOCK_MOD(block_buffer_head - tail + BLOCK_BUFFER_SIZE) > 3) { // moves queued + block_index = BLOCK_MOD(block_buffer_head - 3); + block_t *block[3] = { NULL, NULL, NULL }; + while (block_index != tail) { + block_index = prev_block_index(block_index); block[2]= block[1]; block[1]= block[0]; block[0] = &block_buffer[block_index]; @@ -299,9 +264,7 @@ void planner_reverse_pass() { // The kernel called by planner_recalculate() when scanning the plan from first to last entry. void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *next) { - if(!previous) { - return; - } + if (!previous) return; // If the previous block is an acceleration block, but it is not long enough to complete the // full speed change within the block, we need to adjust the entry speed accordingly. Entry @@ -309,8 +272,8 @@ void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *n // If nominal length is true, max junction speed is guaranteed to be reached. No need to recheck. if (!previous->nominal_length_flag) { if (previous->entry_speed < current->entry_speed) { - double entry_speed = min( current->entry_speed, - max_allowable_speed(-previous->acceleration,previous->entry_speed,previous->millimeters) ); + double entry_speed = min(current->entry_speed, + max_allowable_speed(-previous->acceleration, previous->entry_speed, previous->millimeters)); // Check for junction speed change if (current->entry_speed != entry_speed) { @@ -321,18 +284,17 @@ void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *n } } -// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This +// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This // implements the forward pass. void planner_forward_pass() { uint8_t block_index = block_buffer_tail; - block_t *block[3] = { - NULL, NULL, NULL }; + block_t *block[3] = { NULL, NULL, NULL }; - while(block_index != block_buffer_head) { + while (block_index != block_buffer_head) { block[0] = block[1]; block[1] = block[2]; block[2] = &block_buffer[block_index]; - planner_forward_pass_kernel(block[0],block[1],block[2]); + planner_forward_pass_kernel(block[0], block[1], block[2]); block_index = next_block_index(block_index); } planner_forward_pass_kernel(block[1], block[2], NULL); @@ -346,22 +308,23 @@ void planner_recalculate_trapezoids() { block_t *current; block_t *next = NULL; - while(block_index != block_buffer_head) { + while (block_index != block_buffer_head) { current = next; next = &block_buffer[block_index]; if (current) { // Recalculate if current block entry or exit junction speed has changed. if (current->recalculate_flag || next->recalculate_flag) { // NOTE: Entry and exit factors always > 0 by all previous logic operations. - calculate_trapezoid_for_block(current, current->entry_speed/current->nominal_speed, - next->entry_speed/current->nominal_speed); + calculate_trapezoid_for_block(current, + current->entry_speed / current->nominal_speed, + next->entry_speed / current->nominal_speed); current->recalculate_flag = false; // Reset current only to ensure next trapezoid is computed } } block_index = next_block_index( block_index ); } // Last/newest block in buffer. Exit speed is set with MINIMUM_PLANNER_SPEED. Always recalculated. - if(next != NULL) { + if (next) { calculate_trapezoid_for_block(next, next->entry_speed/next->nominal_speed, MINIMUM_PLANNER_SPEED/next->nominal_speed); next->recalculate_flag = false; @@ -392,148 +355,120 @@ void planner_recalculate() { } void plan_init() { - block_buffer_head = 0; - block_buffer_tail = 0; + block_buffer_head = block_buffer_tail = 0; memset(position, 0, sizeof(position)); // clear position - previous_speed[0] = 0.0; - previous_speed[1] = 0.0; - previous_speed[2] = 0.0; - previous_speed[3] = 0.0; + for (int i=0; ihigh) - { - high=se; + float high = 0.0; + uint8_t block_index = block_buffer_tail; + + while (block_index != block_buffer_head) { + if ((block_buffer[block_index].steps[X_AXIS] != 0) || + (block_buffer[block_index].steps[Y_AXIS] != 0) || + (block_buffer[block_index].steps[Z_AXIS] != 0)) { + float se=(float(block_buffer[block_index].steps[E_AXIS])/float(block_buffer[block_index].step_event_count))*block_buffer[block_index].nominal_speed; + //se; mm/sec; + if (se > high) high = se; } + block_index = next_block_index(block_index); } - block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); - } - float g=autotemp_min+high*autotemp_factor; - float t=g; - if(tautotemp_max) - t=autotemp_max; - if(oldt>t) - { - t=AUTOTEMP_OLDWEIGHT*oldt+(1-AUTOTEMP_OLDWEIGHT)*t; + float t = autotemp_min + high * autotemp_factor; + if (t < autotemp_min) t = autotemp_min; + if (t > autotemp_max) t = autotemp_max; + if (oldt > t) t = AUTOTEMP_OLDWEIGHT * oldt + (1 - AUTOTEMP_OLDWEIGHT) * t; + oldt = t; + setTargetHotend0(t); } - oldt=t; - setTargetHotend0(t); -} #endif -void check_axes_activity() -{ - unsigned char x_active = 0; - unsigned char y_active = 0; - unsigned char z_active = 0; - unsigned char e_active = 0; - unsigned char tail_fan_speed = fanSpeed; +void check_axes_activity() { + unsigned char axis_active[NUM_AXIS], + tail_fan_speed = fanSpeed; #ifdef BARICUDA - unsigned char tail_valve_pressure = ValvePressure; - unsigned char tail_e_to_p_pressure = EtoPPressure; + unsigned char tail_valve_pressure = ValvePressure, + tail_e_to_p_pressure = EtoPPressure; #endif block_t *block; - if(block_buffer_tail != block_buffer_head) - { + if (blocks_queued()) { uint8_t block_index = block_buffer_tail; tail_fan_speed = block_buffer[block_index].fan_speed; #ifdef BARICUDA - tail_valve_pressure = block_buffer[block_index].valve_pressure; - tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure; + tail_valve_pressure = block_buffer[block_index].valve_pressure; + tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure; #endif - while(block_index != block_buffer_head) - { + while (block_index != block_buffer_head) { block = &block_buffer[block_index]; - if(block->steps_x != 0) x_active++; - if(block->steps_y != 0) y_active++; - if(block->steps_z != 0) z_active++; - if(block->steps_e != 0) e_active++; - block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + for (int i=0; isteps[i]) axis_active[i]++; + block_index = next_block_index(block_index); } } - if((DISABLE_X) && (x_active == 0)) disable_x(); - if((DISABLE_Y) && (y_active == 0)) disable_y(); - if((DISABLE_Z) && (z_active == 0)) disable_z(); - if((DISABLE_E) && (e_active == 0)) - { + if (DISABLE_X && !axis_active[X_AXIS]) disable_x(); + if (DISABLE_Y && !axis_active[Y_AXIS]) disable_y(); + if (DISABLE_Z && !axis_active[Z_AXIS]) disable_z(); + if (DISABLE_E && !axis_active[E_AXIS]) { disable_e0(); disable_e1(); - disable_e2(); + disable_e2(); disable_e3(); } -#if defined(FAN_PIN) && FAN_PIN > -1 - #ifdef FAN_KICKSTART_TIME - static unsigned long fan_kick_end; - if (tail_fan_speed) { - if (fan_kick_end == 0) { - // Just starting up fan - run at full power. - fan_kick_end = millis() + FAN_KICKSTART_TIME; - tail_fan_speed = 255; - } else if (fan_kick_end > millis()) - // Fan still spinning up. - tail_fan_speed = 255; - } else { - fan_kick_end = 0; - } - #endif//FAN_KICKSTART_TIME - #ifdef FAN_SOFT_PWM - fanSpeedSoftPwm = tail_fan_speed; - #else - analogWrite(FAN_PIN,tail_fan_speed); - #endif//!FAN_SOFT_PWM -#endif//FAN_PIN > -1 -#ifdef AUTOTEMP - getHighESpeed(); -#endif -#ifdef BARICUDA - #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1 + #if defined(FAN_PIN) && FAN_PIN > -1 // HAS_FAN + #ifdef FAN_KICKSTART_TIME + static unsigned long fan_kick_end; + if (tail_fan_speed) { + if (fan_kick_end == 0) { + // Just starting up fan - run at full power. + fan_kick_end = millis() + FAN_KICKSTART_TIME; + tail_fan_speed = 255; + } else if (fan_kick_end > millis()) + // Fan still spinning up. + tail_fan_speed = 255; + } else { + fan_kick_end = 0; + } + #endif//FAN_KICKSTART_TIME + #ifdef FAN_SOFT_PWM + fanSpeedSoftPwm = tail_fan_speed; + #else + analogWrite(FAN_PIN, tail_fan_speed); + #endif //!FAN_SOFT_PWM + #endif //FAN_PIN > -1 + + #ifdef AUTOTEMP + getHighESpeed(); + #endif + + #ifdef BARICUDA + #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1 // HAS_HEATER_1 analogWrite(HEATER_1_PIN,tail_valve_pressure); - #endif - - #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1 + #endif + #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1 // HAS_HEATER_2 analogWrite(HEATER_2_PIN,tail_e_to_p_pressure); + #endif #endif -#endif } float junction_deviation = 0.1; -// Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in +// Add a new linear movement to the buffer. steps[X_AXIS], _y and _z is the absolute position in // mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration // calculation the caller must also provide the physical length of the line in millimeters. #ifdef ENABLE_AUTO_BED_LEVELING -void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder) + void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder) #else -void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder) + void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder) #endif //ENABLE_AUTO_BED_LEVELING { // Calculate the buffer head after we push this byte @@ -541,45 +476,45 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa // If the buffer is full: good! That means we are well ahead of the robot. // Rest here until there is room in the buffer. - while(block_buffer_tail == next_buffer_head) - { + while(block_buffer_tail == next_buffer_head) { manage_heater(); manage_inactivity(); lcd_update(); } -#ifdef ENABLE_AUTO_BED_LEVELING - apply_rotation_xyz(plan_bed_level_matrix, x, y, z); -#endif // ENABLE_AUTO_BED_LEVELING + #ifdef ENABLE_AUTO_BED_LEVELING + apply_rotation_xyz(plan_bed_level_matrix, x, y, z); + #endif // The target position of the tool in absolute steps // Calculate target position in absolute steps //this should be done after the wait, because otherwise a M92 code within the gcode disrupts this calculation somehow - long target[4]; - target[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); - target[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); - target[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); - target[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + long target[NUM_AXIS]; + target[X_AXIS] = lround(x * axis_steps_per_unit[X_AXIS]); + target[Y_AXIS] = lround(y * axis_steps_per_unit[Y_AXIS]); + target[Z_AXIS] = lround(z * axis_steps_per_unit[Z_AXIS]); + target[E_AXIS] = lround(e * axis_steps_per_unit[E_AXIS]); + + float dx = target[X_AXIS] - position[X_AXIS], + dy = target[Y_AXIS] - position[Y_AXIS], + dz = target[Z_AXIS] - position[Z_AXIS], + de = target[E_AXIS] - position[E_AXIS]; #ifdef PREVENT_DANGEROUS_EXTRUDE - if(target[E_AXIS]!=position[E_AXIS]) - { - if(degHotend(active_extruder) axis_steps_per_unit[E_AXIS] * EXTRUDE_MAXLENGTH) { + position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); + } + #endif } - - #ifdef PREVENT_LENGTHY_EXTRUDE - if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH) - { - position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); - } - #endif - } #endif // Prepare to set up new block @@ -589,139 +524,122 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa block->busy = false; // Number of steps for each axis -#ifndef COREXY -// default non-h-bot planning -block->steps_x = labs(target[X_AXIS]-position[X_AXIS]); -block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]); -#else -// corexy planning -// these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html -block->steps_x = labs((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS])); -block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS])); -#endif - block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]); - block->steps_e = labs(target[E_AXIS]-position[E_AXIS]); - block->steps_e *= volumetric_multiplier[active_extruder]; - block->steps_e *= extrudemultiply; - block->steps_e /= 100; - block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e))); + #ifdef COREXY + // corexy planning + // these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html + block->steps[A_AXIS] = labs(dx + dy); + block->steps[B_AXIS] = labs(dx - dy); + #else + // default non-h-bot planning + block->steps[X_AXIS] = labs(dx); + block->steps[Y_AXIS] = labs(dy); + #endif + + block->steps[Z_AXIS] = labs(dz); + block->steps[E_AXIS] = labs(de); + block->steps[E_AXIS] *= volumetric_multiplier[active_extruder]; + block->steps[E_AXIS] *= extrudemultiply; + block->steps[E_AXIS] /= 100; + block->step_event_count = max(block->steps[X_AXIS], max(block->steps[Y_AXIS], max(block->steps[Z_AXIS], block->steps[E_AXIS]))); // Bail if this is a zero-length block - if (block->step_event_count <= dropsegments) - { - return; - } + if (block->step_event_count <= dropsegments) return; block->fan_speed = fanSpeed; #ifdef BARICUDA - block->valve_pressure = ValvePressure; - block->e_to_p_pressure = EtoPPressure; + block->valve_pressure = ValvePressure; + block->e_to_p_pressure = EtoPPressure; #endif // Compute direction bits for this block - block->direction_bits = 0; -#ifndef COREXY - if (target[X_AXIS] < position[X_AXIS]) - { - block->direction_bits |= BIT(X_AXIS); - } - if (target[Y_AXIS] < position[Y_AXIS]) - { - block->direction_bits |= BIT(Y_AXIS); - } -#else - if (target[X_AXIS] < position[X_AXIS]) - { - block->direction_bits |= BIT(X_HEAD); //AlexBorro: Save the real Extruder (head) direction in X Axis - } - if (target[Y_AXIS] < position[Y_AXIS]) - { - block->direction_bits |= BIT(Y_HEAD); //AlexBorro: Save the real Extruder (head) direction in Y Axis - } - if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0) - { - block->direction_bits |= BIT(X_AXIS); //AlexBorro: Motor A direction (Incorrectly implemented as X_AXIS) - } - if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0) - { - block->direction_bits |= BIT(Y_AXIS); //AlexBorro: Motor B direction (Incorrectly implemented as Y_AXIS) - } -#endif - if (target[Z_AXIS] < position[Z_AXIS]) - { - block->direction_bits |= BIT(Z_AXIS); - } - if (target[E_AXIS] < position[E_AXIS]) - { - block->direction_bits |= BIT(E_AXIS); - } + uint8_t db = 0; + #ifdef COREXY + if (dx < 0) db |= BIT(X_HEAD); // Save the real Extruder (head) direction in X Axis + if (dy < 0) db |= BIT(Y_HEAD); // ...and Y + if (dx + dy < 0) db |= BIT(A_AXIS); // Motor A direction + if (dx - dy < 0) db |= BIT(B_AXIS); // Motor B direction + #else + if (dx < 0) db |= BIT(X_AXIS); + if (dy < 0) db |= BIT(Y_AXIS); + #endif + if (dz < 0) db |= BIT(Z_AXIS); + if (de < 0) db |= BIT(E_AXIS); + block->direction_bits = db; block->active_extruder = extruder; //enable active axes #ifdef COREXY - if((block->steps_x != 0) || (block->steps_y != 0)) - { - enable_x(); - enable_y(); - } + if (block->steps[A_AXIS] || block->steps[B_AXIS]) { + enable_x(); + enable_y(); + } #else - if(block->steps_x != 0) enable_x(); - if(block->steps_y != 0) enable_y(); + if (block->steps[X_AXIS]) enable_x(); + if (block->steps[Y_AXIS]) enable_y(); + #endif + + #ifndef Z_LATE_ENABLE + if (block->steps[Z_AXIS]) enable_z(); #endif -#ifndef Z_LATE_ENABLE - if(block->steps_z != 0) enable_z(); -#endif // Enable extruder(s) - if(block->steps_e != 0) - { - if (DISABLE_INACTIVE_EXTRUDER) //enable only selected extruder - { + if (block->steps[E_AXIS]) { + if (DISABLE_INACTIVE_EXTRUDER) { //enable only selected extruder - if(g_uc_extruder_last_move[0] > 0) g_uc_extruder_last_move[0]--; - if(g_uc_extruder_last_move[1] > 0) g_uc_extruder_last_move[1]--; - if(g_uc_extruder_last_move[2] > 0) g_uc_extruder_last_move[2]--; - if(g_uc_extruder_last_move[3] > 0) g_uc_extruder_last_move[3]--; + for (int i=0; i 0) g_uc_extruder_last_move[i]--; - switch(extruder) - { - case 0: - enable_e0(); - g_uc_extruder_last_move[0] = BLOCK_BUFFER_SIZE*2; - - if(g_uc_extruder_last_move[1] == 0) disable_e1(); - if(g_uc_extruder_last_move[2] == 0) disable_e2(); - if(g_uc_extruder_last_move[3] == 0) disable_e3(); + switch(extruder) { + case 0: + enable_e0(); + g_uc_extruder_last_move[0] = BLOCK_BUFFER_SIZE * 2; + #if EXTRUDERS > 1 + if (g_uc_extruder_last_move[1] == 0) disable_e1(); + #if EXTRUDERS > 2 + if (g_uc_extruder_last_move[2] == 0) disable_e2(); + #if EXTRUDERS > 3 + if (g_uc_extruder_last_move[3] == 0) disable_e3(); + #endif + #endif + #endif break; - case 1: - enable_e1(); - g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE*2; - - if(g_uc_extruder_last_move[0] == 0) disable_e0(); - if(g_uc_extruder_last_move[2] == 0) disable_e2(); - if(g_uc_extruder_last_move[3] == 0) disable_e3(); - break; - case 2: - enable_e2(); - g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE*2; - - if(g_uc_extruder_last_move[0] == 0) disable_e0(); - if(g_uc_extruder_last_move[1] == 0) disable_e1(); - if(g_uc_extruder_last_move[3] == 0) disable_e3(); - break; - case 3: - enable_e3(); - g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2; - - if(g_uc_extruder_last_move[0] == 0) disable_e0(); - if(g_uc_extruder_last_move[1] == 0) disable_e1(); - if(g_uc_extruder_last_move[2] == 0) disable_e2(); - break; + #if EXTRUDERS > 1 + case 1: + enable_e1(); + g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE*2; + if (g_uc_extruder_last_move[0] == 0) disable_e0(); + #if EXTRUDERS > 2 + if (g_uc_extruder_last_move[2] == 0) disable_e2(); + #if EXTRUDERS > 3 + if (g_uc_extruder_last_move[3] == 0) disable_e3(); + #endif + #endif + break; + #if EXTRUDERS > 2 + case 2: + enable_e2(); + g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE*2; + if (g_uc_extruder_last_move[0] == 0) disable_e0(); + if (g_uc_extruder_last_move[1] == 0) disable_e1(); + #if EXTRUDERS > 3 + if (g_uc_extruder_last_move[3] == 0) disable_e3(); + #endif + break; + #if EXTRUDERS > 3 + case 3: + enable_e3(); + g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2; + if (g_uc_extruder_last_move[0] == 0) disable_e0(); + if (g_uc_extruder_last_move[1] == 0) disable_e1(); + if (g_uc_extruder_last_move[2] == 0) disable_e2(); + break; + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 } } - else //enable all - { + else { // enable all enable_e0(); enable_e1(); enable_e2(); @@ -729,276 +647,256 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi } } - if (block->steps_e == 0) - { - if(feed_ratesteps[E_AXIS]) { + if (feed_rate < minimumfeedrate) feed_rate = minimumfeedrate; } - else - { - if(feed_ratesteps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments ) - { + delta_mm[Z_AXIS] = dz / axis_steps_per_unit[Z_AXIS]; + delta_mm[E_AXIS] = (de / axis_steps_per_unit[E_AXIS]) * volumetric_multiplier[active_extruder] * extrudemultiply / 100.0; + + if (block->steps[X_AXIS] <= dropsegments && block->steps[Y_AXIS] <= dropsegments && block->steps[Z_AXIS] <= dropsegments) { block->millimeters = fabs(delta_mm[E_AXIS]); } - else - { - #ifndef COREXY - block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS])); - #else - block->millimeters = sqrt(square(delta_mm[X_HEAD]) + square(delta_mm[Y_HEAD]) + square(delta_mm[Z_AXIS])); - #endif + else { + block->millimeters = sqrt( + #ifdef COREXY + square(delta_mm[X_HEAD]) + square(delta_mm[Y_HEAD]) + #else + square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + #endif + + square(delta_mm[Z_AXIS]) + ); } - float inverse_millimeters = 1.0/block->millimeters; // Inverse millimeters to remove multiple divides + float inverse_millimeters = 1.0 / block->millimeters; // Inverse millimeters to remove multiple divides - // Calculate speed in mm/second for each axis. No divide by zero due to previous checks. + // Calculate speed in mm/second for each axis. No divide by zero due to previous checks. float inverse_second = feed_rate * inverse_millimeters; - int moves_queued=(block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1); + int moves_queued = movesplanned(); // slow down when de buffer starts to empty, rather than wait at the corner for a buffer refill -#ifdef OLD_SLOWDOWN - if(moves_queued < (BLOCK_BUFFER_SIZE * 0.5) && moves_queued > 1) - feed_rate = feed_rate*moves_queued / (BLOCK_BUFFER_SIZE * 0.5); -#endif + bool mq = moves_queued > 1 && moves_queued < BLOCK_BUFFER_SIZE / 2; + #ifdef OLD_SLOWDOWN + if (mq) feed_rate *= 2.0 * moves_queued / BLOCK_BUFFER_SIZE; + #endif -#ifdef SLOWDOWN - // segment time im micro seconds - unsigned long segment_time = lround(1000000.0/inverse_second); - if ((moves_queued > 1) && (moves_queued < (BLOCK_BUFFER_SIZE * 0.5))) - { - if (segment_time < minsegmenttime) - { // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. - inverse_second=1000000.0/(segment_time+lround(2*(minsegmenttime-segment_time)/moves_queued)); - #ifdef XY_FREQUENCY_LIMIT - segment_time = lround(1000000.0/inverse_second); - #endif + #ifdef SLOWDOWN + // segment time im micro seconds + unsigned long segment_time = lround(1000000.0/inverse_second); + if (mq) { + if (segment_time < minsegmenttime) { + // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. + inverse_second = 1000000.0 / (segment_time + lround(2 * (minsegmenttime - segment_time) / moves_queued)); + #ifdef XY_FREQUENCY_LIMIT + segment_time = lround(1000000.0 / inverse_second); + #endif + } } - } -#endif + #endif // END OF SLOW DOWN SECTION - block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0 block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0 -#ifdef FILAMENT_SENSOR - //FMM update ring buffer used for delay with filament measurements + #ifdef FILAMENT_SENSOR + //FMM update ring buffer used for delay with filament measurements - - if((extruder==FILAMENT_SENSOR_EXTRUDER_NUM) && (delay_index2 > -1)) //only for extruder with filament sensor and if ring buffer is initialized - { - delay_dist = delay_dist + delta_mm[E_AXIS]; //increment counter with next move in e axis - - while (delay_dist >= (10*(MAX_MEASUREMENT_DELAY+1))) //check if counter is over max buffer size in mm - delay_dist = delay_dist - 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer - while (delay_dist<0) - delay_dist = delay_dist + 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer - - delay_index1=delay_dist/10.0; //calculate index - - //ensure the number is within range of the array after converting from floating point - if(delay_index1<0) - delay_index1=0; - else if (delay_index1>MAX_MEASUREMENT_DELAY) - delay_index1=MAX_MEASUREMENT_DELAY; - - if(delay_index1 != delay_index2) //moved index - { - meas_sample=widthFil_to_size_ratio()-100; //subtract off 100 to reduce magnitude - to store in a signed char - } - while( delay_index1 != delay_index2) - { - delay_index2 = delay_index2 + 1; - if(delay_index2>MAX_MEASUREMENT_DELAY) - delay_index2=delay_index2-(MAX_MEASUREMENT_DELAY+1); //loop around buffer when incrementing - if(delay_index2<0) - delay_index2=0; - else if (delay_index2>MAX_MEASUREMENT_DELAY) - delay_index2=MAX_MEASUREMENT_DELAY; - - measurement_delay[delay_index2]=meas_sample; - } - - - } -#endif + if (extruder == FILAMENT_SENSOR_EXTRUDER_NUM && delay_index2 > -1) { //only for extruder with filament sensor and if ring buffer is initialized + const int MMD = MAX_MEASUREMENT_DELAY + 1, MMD10 = MMD * 10; + + delay_dist += delta_mm[E_AXIS]; // increment counter with next move in e axis + while (delay_dist >= MMD10) delay_dist -= MMD10; // loop around the buffer + while (delay_dist < 0) delay_dist += MMD10; + + delay_index1 = delay_dist / 10.0; // calculate index + delay_index1 = constrain(delay_index1, 0, MAX_MEASUREMENT_DELAY); // (already constrained above) + + if (delay_index1 != delay_index2) { // moved index + meas_sample = widthFil_to_size_ratio() - 100; // Subtract 100 to reduce magnitude - to store in a signed char + while (delay_index1 != delay_index2) { + // Increment and loop around buffer + if (++delay_index2 >= MMD) delay_index2 -= MMD; + delay_index2 = constrain(delay_index2, 0, MAX_MEASUREMENT_DELAY); + measurement_delay[delay_index2] = meas_sample; + } + } + } + #endif // Calculate and limit speed in mm/sec for each axis - float current_speed[4]; + float current_speed[NUM_AXIS]; float speed_factor = 1.0; //factor <=1 do decrease speed - for(int i=0; i < 4; i++) - { + for (int i = 0; i < NUM_AXIS; i++) { current_speed[i] = delta_mm[i] * inverse_second; - if(fabs(current_speed[i]) > max_feedrate[i]) - speed_factor = min(speed_factor, max_feedrate[i] / fabs(current_speed[i])); + float cs = fabs(current_speed[i]), mf = max_feedrate[i]; + if (cs > mf) speed_factor = min(speed_factor, mf / cs); } // Max segement time in us. -#ifdef XY_FREQUENCY_LIMIT -#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT) - // Check and limit the xy direction change frequency - unsigned char direction_change = block->direction_bits ^ old_direction_bits; - old_direction_bits = block->direction_bits; - segment_time = lround((float)segment_time / speed_factor); + #ifdef XY_FREQUENCY_LIMIT + #define MAX_FREQ_TIME (1000000.0 / XY_FREQUENCY_LIMIT) + + // Check and limit the xy direction change frequency + unsigned char direction_change = block->direction_bits ^ old_direction_bits; + old_direction_bits = block->direction_bits; + segment_time = lround((float)segment_time / speed_factor); - if((direction_change & BIT(X_AXIS)) == 0) - { - x_segment_time[0] += segment_time; - } - else - { - x_segment_time[2] = x_segment_time[1]; - x_segment_time[1] = x_segment_time[0]; - x_segment_time[0] = segment_time; - } - if((direction_change & BIT(Y_AXIS)) == 0) - { - y_segment_time[0] += segment_time; - } - else - { - y_segment_time[2] = y_segment_time[1]; - y_segment_time[1] = y_segment_time[0]; - y_segment_time[0] = segment_time; - } - long max_x_segment_time = max(x_segment_time[0], max(x_segment_time[1], x_segment_time[2])); - long max_y_segment_time = max(y_segment_time[0], max(y_segment_time[1], y_segment_time[2])); - long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time); - if(min_xy_segment_time < MAX_FREQ_TIME) - speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME); -#endif // XY_FREQUENCY_LIMIT + long xs0 = axis_segment_time[X_AXIS][0], + xs1 = axis_segment_time[X_AXIS][1], + xs2 = axis_segment_time[X_AXIS][2], + ys0 = axis_segment_time[Y_AXIS][0], + ys1 = axis_segment_time[Y_AXIS][1], + ys2 = axis_segment_time[Y_AXIS][2]; + + if ((direction_change & BIT(X_AXIS)) != 0) { + xs2 = axis_segment_time[X_AXIS][2] = xs1; + xs1 = axis_segment_time[X_AXIS][1] = xs0; + xs0 = 0; + } + xs0 = axis_segment_time[X_AXIS][0] = xs0 + segment_time; + + if ((direction_change & BIT(Y_AXIS)) != 0) { + ys2 = axis_segment_time[Y_AXIS][2] = axis_segment_time[Y_AXIS][1]; + ys1 = axis_segment_time[Y_AXIS][1] = axis_segment_time[Y_AXIS][0]; + ys0 = 0; + } + ys0 = axis_segment_time[Y_AXIS][0] = ys0 + segment_time; + + long max_x_segment_time = max(xs0, max(xs1, xs2)), + max_y_segment_time = max(ys0, max(ys1, ys2)), + min_xy_segment_time = min(max_x_segment_time, max_y_segment_time); + if (min_xy_segment_time < MAX_FREQ_TIME) { + float low_sf = speed_factor * min_xy_segment_time / MAX_FREQ_TIME; + speed_factor = min(speed_factor, low_sf); + } + #endif // XY_FREQUENCY_LIMIT // Correct the speed - if( speed_factor < 1.0) - { - for(unsigned char i=0; i < 4; i++) - { - current_speed[i] *= speed_factor; - } + if (speed_factor < 1.0) { + for (unsigned char i = 0; i < NUM_AXIS; i++) current_speed[i] *= speed_factor; block->nominal_speed *= speed_factor; block->nominal_rate *= speed_factor; } // Compute and limit the acceleration rate for the trapezoid generator. - float steps_per_mm = block->step_event_count/block->millimeters; - if(block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0) - { + float steps_per_mm = block->step_event_count / block->millimeters; + long bsx = block->steps[X_AXIS], bsy = block->steps[Y_AXIS], bsz = block->steps[Z_AXIS], bse = block->steps[E_AXIS]; + if (bsx == 0 && bsy == 0 && bsz == 0) { block->acceleration_st = ceil(retract_acceleration * steps_per_mm); // convert to: acceleration steps/sec^2 } - else if(block->steps_e == 0) - { + else if (bse == 0) { block->acceleration_st = ceil(travel_acceleration * steps_per_mm); // convert to: acceleration steps/sec^2 } - else - { + else { block->acceleration_st = ceil(acceleration * steps_per_mm); // convert to: acceleration steps/sec^2 } // Limit acceleration per axis - if(((float)block->acceleration_st * (float)block->steps_x / (float)block->step_event_count) > axis_steps_per_sqr_second[X_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[X_AXIS]; - if(((float)block->acceleration_st * (float)block->steps_y / (float)block->step_event_count) > axis_steps_per_sqr_second[Y_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS]; - if(((float)block->acceleration_st * (float)block->steps_e / (float)block->step_event_count) > axis_steps_per_sqr_second[E_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[E_AXIS]; - if(((float)block->acceleration_st * (float)block->steps_z / (float)block->step_event_count ) > axis_steps_per_sqr_second[Z_AXIS]) - block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS]; + unsigned long acc_st = block->acceleration_st, + xsteps = axis_steps_per_sqr_second[X_AXIS], + ysteps = axis_steps_per_sqr_second[Y_AXIS], + zsteps = axis_steps_per_sqr_second[Z_AXIS], + esteps = axis_steps_per_sqr_second[E_AXIS]; + if ((float)acc_st * bsx / block->step_event_count > xsteps) acc_st = xsteps; + if ((float)acc_st * bsy / block->step_event_count > ysteps) acc_st = ysteps; + if ((float)acc_st * bsz / block->step_event_count > zsteps) acc_st = zsteps; + if ((float)acc_st * bse / block->step_event_count > esteps) acc_st = esteps; - block->acceleration = block->acceleration_st / steps_per_mm; - block->acceleration_rate = (long)((float)block->acceleration_st * (16777216.0 / (F_CPU / 8.0))); + block->acceleration_st = acc_st; + block->acceleration = acc_st / steps_per_mm; + block->acceleration_rate = (long)(acc_st * 16777216.0 / (F_CPU / 8.0)); -#if 0 // Use old jerk for now - // Compute path unit vector - double unit_vec[3]; + #if 0 // Use old jerk for now + // Compute path unit vector + double unit_vec[3]; - unit_vec[X_AXIS] = delta_mm[X_AXIS]*inverse_millimeters; - unit_vec[Y_AXIS] = delta_mm[Y_AXIS]*inverse_millimeters; - unit_vec[Z_AXIS] = delta_mm[Z_AXIS]*inverse_millimeters; + unit_vec[X_AXIS] = delta_mm[X_AXIS]*inverse_millimeters; + unit_vec[Y_AXIS] = delta_mm[Y_AXIS]*inverse_millimeters; + unit_vec[Z_AXIS] = delta_mm[Z_AXIS]*inverse_millimeters; - // Compute maximum allowable entry speed at junction by centripetal acceleration approximation. - // Let a circle be tangent to both previous and current path line segments, where the junction - // deviation is defined as the distance from the junction to the closest edge of the circle, - // colinear with the circle center. The circular segment joining the two paths represents the - // path of centripetal acceleration. Solve for max velocity based on max acceleration about the - // radius of the circle, defined indirectly by junction deviation. This may be also viewed as - // path width or max_jerk in the previous grbl version. This approach does not actually deviate - // from path, but used as a robust way to compute cornering speeds, as it takes into account the - // nonlinearities of both the junction angle and junction velocity. - double vmax_junction = MINIMUM_PLANNER_SPEED; // Set default max junction speed + // Compute maximum allowable entry speed at junction by centripetal acceleration approximation. + // Let a circle be tangent to both previous and current path line segments, where the junction + // deviation is defined as the distance from the junction to the closest edge of the circle, + // colinear with the circle center. The circular segment joining the two paths represents the + // path of centripetal acceleration. Solve for max velocity based on max acceleration about the + // radius of the circle, defined indirectly by junction deviation. This may be also viewed as + // path width or max_jerk in the previous grbl version. This approach does not actually deviate + // from path, but used as a robust way to compute cornering speeds, as it takes into account the + // nonlinearities of both the junction angle and junction velocity. + double vmax_junction = MINIMUM_PLANNER_SPEED; // Set default max junction speed - // Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles. - if ((block_buffer_head != block_buffer_tail) && (previous_nominal_speed > 0.0)) { - // Compute cosine of angle between previous and current path. (prev_unit_vec is negative) - // NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity. - double cos_theta = - previous_unit_vec[X_AXIS] * unit_vec[X_AXIS] - - previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS] - - previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS] ; + // Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles. + if ((block_buffer_head != block_buffer_tail) && (previous_nominal_speed > 0.0)) { + // Compute cosine of angle between previous and current path. (prev_unit_vec is negative) + // NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity. + double cos_theta = - previous_unit_vec[X_AXIS] * unit_vec[X_AXIS] + - previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS] + - previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS] ; - // Skip and use default max junction speed for 0 degree acute junction. - if (cos_theta < 0.95) { - vmax_junction = min(previous_nominal_speed,block->nominal_speed); - // Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds. - if (cos_theta > -0.95) { - // Compute maximum junction velocity based on maximum acceleration and junction deviation - double sin_theta_d2 = sqrt(0.5*(1.0-cos_theta)); // Trig half angle identity. Always positive. - vmax_junction = min(vmax_junction, - sqrt(block->acceleration * junction_deviation * sin_theta_d2/(1.0-sin_theta_d2)) ); + // Skip and use default max junction speed for 0 degree acute junction. + if (cos_theta < 0.95) { + vmax_junction = min(previous_nominal_speed,block->nominal_speed); + // Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds. + if (cos_theta > -0.95) { + // Compute maximum junction velocity based on maximum acceleration and junction deviation + double sin_theta_d2 = sqrt(0.5*(1.0-cos_theta)); // Trig half angle identity. Always positive. + vmax_junction = min(vmax_junction, + sqrt(block->acceleration * junction_deviation * sin_theta_d2/(1.0-sin_theta_d2)) ); + } } } - } -#endif + #endif + // Start with a safe speed - float vmax_junction = max_xy_jerk/2; + float vmax_junction = max_xy_jerk / 2; float vmax_junction_factor = 1.0; - if(fabs(current_speed[Z_AXIS]) > max_z_jerk/2) - vmax_junction = min(vmax_junction, max_z_jerk/2); - if(fabs(current_speed[E_AXIS]) > max_e_jerk/2) - vmax_junction = min(vmax_junction, max_e_jerk/2); + float mz2 = max_z_jerk / 2, me2 = max_e_jerk / 2; + float csz = current_speed[Z_AXIS], cse = current_speed[E_AXIS]; + if (fabs(csz) > mz2) vmax_junction = min(vmax_junction, mz2); + if (fabs(cse) > me2) vmax_junction = min(vmax_junction, me2); vmax_junction = min(vmax_junction, block->nominal_speed); float safe_speed = vmax_junction; if ((moves_queued > 1) && (previous_nominal_speed > 0.0001)) { - float jerk = sqrt(pow((current_speed[X_AXIS]-previous_speed[X_AXIS]), 2)+pow((current_speed[Y_AXIS]-previous_speed[Y_AXIS]), 2)); - // if((fabs(previous_speed[X_AXIS]) > 0.0001) || (fabs(previous_speed[Y_AXIS]) > 0.0001)) { + float dx = current_speed[X_AXIS] - previous_speed[X_AXIS], + dy = current_speed[Y_AXIS] - previous_speed[Y_AXIS], + dz = fabs(csz - previous_speed[Z_AXIS]), + de = fabs(cse - previous_speed[E_AXIS]), + jerk = sqrt(dx * dx + dy * dy); + + // if ((fabs(previous_speed[X_AXIS]) > 0.0001) || (fabs(previous_speed[Y_AXIS]) > 0.0001)) { vmax_junction = block->nominal_speed; // } - if (jerk > max_xy_jerk) { - vmax_junction_factor = (max_xy_jerk/jerk); - } - if(fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]) > max_z_jerk) { - vmax_junction_factor= min(vmax_junction_factor, (max_z_jerk/fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]))); - } - if(fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]) > max_e_jerk) { - vmax_junction_factor = min(vmax_junction_factor, (max_e_jerk/fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]))); - } + if (jerk > max_xy_jerk) vmax_junction_factor = max_xy_jerk / jerk; + if (dz > max_z_jerk) vmax_junction_factor = min(vmax_junction_factor, max_z_jerk / dz); + if (de > max_e_jerk) vmax_junction_factor = min(vmax_junction_factor, max_e_jerk / de); + vmax_junction = min(previous_nominal_speed, vmax_junction * vmax_junction_factor); // Limit speed to max previous speed } block->max_entry_speed = vmax_junction; // Initialize block entry speed. Compute based on deceleration to user-defined MINIMUM_PLANNER_SPEED. - double v_allowable = max_allowable_speed(-block->acceleration,MINIMUM_PLANNER_SPEED,block->millimeters); + double v_allowable = max_allowable_speed(-block->acceleration, MINIMUM_PLANNER_SPEED, block->millimeters); block->entry_speed = min(vmax_junction, v_allowable); // Initialize planner efficiency flags @@ -1009,119 +907,95 @@ Having the real displacement of the head, we can calculate the total movement le // block nominal speed limits both the current and next maximum junction speeds. Hence, in both // the reverse and forward planners, the corresponding block junction speed will always be at the // the maximum junction speed and may always be ignored for any speed reduction checks. - if (block->nominal_speed <= v_allowable) { - block->nominal_length_flag = true; - } - else { - block->nominal_length_flag = false; - } + block->nominal_length_flag = (block->nominal_speed <= v_allowable); block->recalculate_flag = true; // Always calculate trapezoid for new block // Update previous path unit_vector and nominal speed - memcpy(previous_speed, current_speed, sizeof(previous_speed)); // previous_speed[] = current_speed[] + for (int i = 0; i < NUM_AXIS; i++) previous_speed[i] = current_speed[i]; previous_nominal_speed = block->nominal_speed; - -#ifdef ADVANCE - // Calculate advance rate - if((block->steps_e == 0) || (block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)) { - block->advance_rate = 0; - block->advance = 0; - } - else { - long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st); - float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) * - (current_speed[E_AXIS] * current_speed[E_AXIS] * EXTRUSION_AREA * EXTRUSION_AREA)*256; - block->advance = advance; - if(acc_dist == 0) { + #ifdef ADVANCE + // Calculate advance rate + if (!bse || (!bsx && !bsy && !bsz)) { block->advance_rate = 0; - } - else { - block->advance_rate = advance / (float)acc_dist; + block->advance = 0; } - } - /* - SERIAL_ECHO_START; - SERIAL_ECHOPGM("advance :"); - SERIAL_ECHO(block->advance/256.0); - SERIAL_ECHOPGM("advance rate :"); - SERIAL_ECHOLN(block->advance_rate/256.0); - */ -#endif // ADVANCE + else { + long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st); + float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) * (cse * cse * EXTRUSION_AREA * EXTRUSION_AREA) * 256; + block->advance = advance; + block->advance_rate = acc_dist ? advance / (float)acc_dist : 0; + } + /* + SERIAL_ECHO_START; + SERIAL_ECHOPGM("advance :"); + SERIAL_ECHO(block->advance/256.0); + SERIAL_ECHOPGM("advance rate :"); + SERIAL_ECHOLN(block->advance_rate/256.0); + */ + #endif // ADVANCE - calculate_trapezoid_for_block(block, block->entry_speed/block->nominal_speed, - safe_speed/block->nominal_speed); + calculate_trapezoid_for_block(block, block->entry_speed / block->nominal_speed, safe_speed / block->nominal_speed); // Move buffer head block_buffer_head = next_buffer_head; // Update position - memcpy(position, target, sizeof(target)); // position[] = target[] + for (int i = 0; i < NUM_AXIS; i++) position[i] = target[i]; planner_recalculate(); st_wake_up(); -} -#if defined(ENABLE_AUTO_BED_LEVELING) && not defined(DELTA) -vector_3 plan_get_position() { - vector_3 position = vector_3(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS)); - - //position.debug("in plan_get position"); - //plan_bed_level_matrix.debug("in plan_get bed_level"); - matrix_3x3 inverse = matrix_3x3::transpose(plan_bed_level_matrix); - //inverse.debug("in plan_get inverse"); - position.apply_rotation(inverse); - //position.debug("after rotation"); - - return position; -} -#endif // ENABLE_AUTO_BED_LEVELING +} // plan_buffer_line() #ifdef ENABLE_AUTO_BED_LEVELING -void plan_set_position(float x, float y, float z, const float &e) -{ - apply_rotation_xyz(plan_bed_level_matrix, x, y, z); + + #ifndef DELTA + vector_3 plan_get_position() { + vector_3 position = vector_3(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS)); + + //position.debug("in plan_get position"); + //plan_bed_level_matrix.debug("in plan_get bed_level"); + matrix_3x3 inverse = matrix_3x3::transpose(plan_bed_level_matrix); + //inverse.debug("in plan_get inverse"); + position.apply_rotation(inverse); + //position.debug("after rotation"); + + return position; + } + #endif //!DELTA + + void plan_set_position(float x, float y, float z, const float &e) #else -void plan_set_position(const float &x, const float &y, const float &z, const float &e) -{ + void plan_set_position(const float &x, const float &y, const float &z, const float &e) #endif // ENABLE_AUTO_BED_LEVELING + { + #ifdef ENABLE_AUTO_BED_LEVELING + apply_rotation_xyz(plan_bed_level_matrix, x, y, z); + #endif - position[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); - position[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); - position[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); - position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); - st_set_position(position[X_AXIS], position[Y_AXIS], position[Z_AXIS], position[E_AXIS]); - previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. - previous_speed[0] = 0.0; - previous_speed[1] = 0.0; - previous_speed[2] = 0.0; - previous_speed[3] = 0.0; -} + float nx = position[X_AXIS] = lround(x * axis_steps_per_unit[X_AXIS]); + float ny = position[Y_AXIS] = lround(y * axis_steps_per_unit[Y_AXIS]); + float nz = position[Z_AXIS] = lround(z * axis_steps_per_unit[Z_AXIS]); + float ne = position[E_AXIS] = lround(e * axis_steps_per_unit[E_AXIS]); + st_set_position(nx, ny, nz, ne); + previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. -void plan_set_e_position(const float &e) -{ - position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + for (int i=0; ibusy = true; - return(block); -} // Returns true if the buffer has a queued block, false otherwise FORCE_INLINE bool blocks_queued() { return (block_buffer_head != block_buffer_tail); } +// Called when the current block is no longer needed. Discards +// the block and makes the memory available for new blocks. +FORCE_INLINE void plan_discard_current_block() { + if (blocks_queued()) + block_buffer_tail = BLOCK_MOD(block_buffer_tail + 1); +} + +// Gets the current block. Returns NULL if buffer empty +FORCE_INLINE block_t *plan_get_current_block() { + if (blocks_queued()) { + block_t *block = &block_buffer[block_buffer_tail]; + block->busy = true; + return block; + } + else + return NULL; +} + #ifdef PREVENT_DANGEROUS_EXTRUDE -void set_extrude_min_temp(float temp); + void set_extrude_min_temp(float temp); #endif void reset_acceleration_rates(); -#endif + +#endif //PLANNER_H diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 9f09f727f0..2989ca9577 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -370,7 +370,7 @@ ISR(TIMER1_COMPA_vect) { step_events_completed = 0; #ifdef Z_LATE_ENABLE - if (current_block->steps_z > 0) { + if (current_block->steps[Z_AXIS] > 0) { enable_z(); OCR1A = 2000; //1ms wait return; @@ -411,7 +411,7 @@ ISR(TIMER1_COMPA_vect) { #define UPDATE_ENDSTOP(axis,AXIS,minmax,MINMAX) \ bool axis ##_## minmax ##_endstop = (READ(AXIS ##_## MINMAX ##_PIN) != AXIS ##_## MINMAX ##_ENDSTOP_INVERTING); \ - if (axis ##_## minmax ##_endstop && old_## axis ##_## minmax ##_endstop && (current_block->steps_## axis > 0)) { \ + if (axis ##_## minmax ##_endstop && old_## axis ##_## minmax ##_endstop && (current_block->steps[AXIS ##_AXIS] > 0)) { \ endstops_trigsteps[AXIS ##_AXIS] = count_position[AXIS ##_AXIS]; \ endstop_## axis ##_hit = true; \ step_events_completed = current_block->step_event_count; \ @@ -420,54 +420,54 @@ ISR(TIMER1_COMPA_vect) { // Check X and Y endstops if (check_endstops) { - #ifndef COREXY - if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular cartesians bot) - #else + #ifdef COREXY // Head direction in -X axis for CoreXY bots. // If DeltaX == -DeltaY, the movement is only in Y axis - if (current_block->steps_x != current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits, Y_AXIS))) - if (TEST(out_bits, X_HEAD)) - #endif - { // -direction - #ifdef DUAL_X_CARRIAGE - // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder - if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1)) - #endif - { - #if defined(X_MIN_PIN) && X_MIN_PIN >= 0 - UPDATE_ENDSTOP(x, X, min, MIN); - #endif - } - } - else { // +direction - #ifdef DUAL_X_CARRIAGE - // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder - if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1)) - #endif - { - #if defined(X_MAX_PIN) && X_MAX_PIN >= 0 - UPDATE_ENDSTOP(x, X, max, MAX); - #endif - } - } - #ifndef COREXY - if (TEST(out_bits, Y_AXIS)) // -direction + if (current_block->steps[A_AXIS] != current_block->steps[B_AXIS] || (TEST(out_bits, A_AXIS) == TEST(out_bits, B_AXIS))) + if (TEST(out_bits, X_HEAD)) #else + if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular cartesians bot) + #endif + { // -direction + #ifdef DUAL_X_CARRIAGE + // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder + if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1)) + #endif + { + #if defined(X_MIN_PIN) && X_MIN_PIN >= 0 + UPDATE_ENDSTOP(x, X, min, MIN); + #endif + } + } + else { // +direction + #ifdef DUAL_X_CARRIAGE + // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder + if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1)) + #endif + { + #if defined(X_MAX_PIN) && X_MAX_PIN >= 0 + UPDATE_ENDSTOP(x, X, max, MAX); + #endif + } + } + #ifdef COREXY // Head direction in -Y axis for CoreXY bots. // If DeltaX == DeltaY, the movement is only in X axis - if (current_block->steps_x != current_block->steps_y || (TEST(out_bits, X_AXIS) != TEST(out_bits, Y_AXIS))) - if (TEST(out_bits, Y_HEAD)) + if (current_block->steps[A_AXIS] != current_block->steps[B_AXIS] || (TEST(out_bits, A_AXIS) != TEST(out_bits, B_AXIS))) + if (TEST(out_bits, Y_HEAD)) + #else + if (TEST(out_bits, Y_AXIS)) // -direction #endif - { // -direction - #if defined(Y_MIN_PIN) && Y_MIN_PIN >= 0 - UPDATE_ENDSTOP(y, Y, min, MIN); - #endif - } - else { // +direction - #if defined(Y_MAX_PIN) && Y_MAX_PIN >= 0 - UPDATE_ENDSTOP(y, Y, max, MAX); - #endif - } + { // -direction + #if defined(Y_MIN_PIN) && Y_MIN_PIN >= 0 + UPDATE_ENDSTOP(y, Y, min, MIN); + #endif + } + else { // +direction + #if defined(Y_MAX_PIN) && Y_MAX_PIN >= 0 + UPDATE_ENDSTOP(y, Y, max, MAX); + #endif + } } if (TEST(out_bits, Z_AXIS)) { // -direction @@ -515,7 +515,7 @@ ISR(TIMER1_COMPA_vect) { #endif #ifdef ADVANCE - counter_e += current_block->steps_e; + counter_e += current_block->steps[E_AXIS]; if (counter_e > 0) { counter_e -= current_block->step_event_count; e_steps[current_block->active_extruder] += TEST(out_bits, E_AXIS) ? -1 : 1; @@ -529,15 +529,14 @@ ISR(TIMER1_COMPA_vect) { * instead of doing each in turn. The extra tests add enough * lag to allow it work with without needing NOPs */ - counter_x += current_block->steps_x; - if (counter_x > 0) X_STEP_WRITE(HIGH); - counter_y += current_block->steps_y; - if (counter_y > 0) Y_STEP_WRITE(HIGH); - counter_z += current_block->steps_z; - if (counter_z > 0) Z_STEP_WRITE(HIGH); + #define STEP_ADD(axis, AXIS) \ + counter_## axis += current_block->steps[AXIS ##_AXIS]; \ + if (counter_## axis > 0) { AXIS ##_STEP_WRITE(HIGH); } + STEP_ADD(x,X); + STEP_ADD(y,Y); + STEP_ADD(z,Z); #ifndef ADVANCE - counter_e += current_block->steps_e; - if (counter_e > 0) E_STEP_WRITE(HIGH); + STEP_ADD(e,E); #endif #define STEP_IF_COUNTER(axis, AXIS) \ @@ -557,7 +556,7 @@ ISR(TIMER1_COMPA_vect) { #else // !CONFIG_STEPPERS_TOSHIBA #define APPLY_MOVEMENT(axis, AXIS) \ - counter_## axis += current_block->steps_## axis; \ + counter_## axis += current_block->steps[AXIS ##_AXIS]; \ if (counter_## axis > 0) { \ AXIS ##_APPLY_STEP(!INVERT_## AXIS ##_STEP_PIN,0); \ counter_## axis -= current_block->step_event_count; \ From af14c684b5d2ca58d44687f7d04dbd7bbb36f930 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 20 Mar 2015 20:57:06 -0700 Subject: [PATCH 07/18] Minor optimizations to planner code - Prefetch values used more than once --- Marlin/planner.cpp | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index a105548b47..6b36cefab1 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -315,9 +315,8 @@ void planner_recalculate_trapezoids() { // Recalculate if current block entry or exit junction speed has changed. if (current->recalculate_flag || next->recalculate_flag) { // NOTE: Entry and exit factors always > 0 by all previous logic operations. - calculate_trapezoid_for_block(current, - current->entry_speed / current->nominal_speed, - next->entry_speed / current->nominal_speed); + float nom = current->nominal_speed; + calculate_trapezoid_for_block(current, current->entry_speed / nom, next->entry_speed / nom); current->recalculate_flag = false; // Reset current only to ensure next trapezoid is computed } } @@ -325,8 +324,8 @@ void planner_recalculate_trapezoids() { } // Last/newest block in buffer. Exit speed is set with MINIMUM_PLANNER_SPEED. Always recalculated. if (next) { - calculate_trapezoid_for_block(next, next->entry_speed/next->nominal_speed, - MINIMUM_PLANNER_SPEED/next->nominal_speed); + float nom = next->nominal_speed; + calculate_trapezoid_for_block(next, next->entry_speed / nom, MINIMUM_PLANNER_SPEED / nom); next->recalculate_flag = false; } } @@ -373,11 +372,9 @@ void plan_init() { uint8_t block_index = block_buffer_tail; while (block_index != block_buffer_head) { - if ((block_buffer[block_index].steps[X_AXIS] != 0) || - (block_buffer[block_index].steps[Y_AXIS] != 0) || - (block_buffer[block_index].steps[Z_AXIS] != 0)) { - float se=(float(block_buffer[block_index].steps[E_AXIS])/float(block_buffer[block_index].step_event_count))*block_buffer[block_index].nominal_speed; - //se; mm/sec; + block_t *block = &block_buffer[block_index]; + if (block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS]) { + float se = (float)block->steps[E_AXIS] / block->step_event_count * block->nominal_speed; // mm/sec; if (se > high) high = se; } block_index = next_block_index(block_index); @@ -399,14 +396,16 @@ void check_axes_activity() { unsigned char tail_valve_pressure = ValvePressure, tail_e_to_p_pressure = EtoPPressure; #endif + block_t *block; if (blocks_queued()) { uint8_t block_index = block_buffer_tail; tail_fan_speed = block_buffer[block_index].fan_speed; #ifdef BARICUDA - tail_valve_pressure = block_buffer[block_index].valve_pressure; - tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure; + block = &block_buffer[block_index]; + tail_valve_pressure = block->valve_pressure; + tail_e_to_p_pressure = block->e_to_p_pressure; #endif while (block_index != block_buffer_head) { block = &block_buffer[block_index]; From 2c9bd15625644d95e80dc8944dacf07101ed4ecf Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 21 Mar 2015 15:24:57 -0700 Subject: [PATCH 08/18] Move LCD items to `Conditionals.h` - `Conditionals.h` is included twice, setting LCD values the first time --- Marlin/Conditionals.h | 249 ------------------ Marlin/Conditionals_lcd.h | 155 ----------- Marlin/Configuration.h | 3 - Marlin/Configuration_adv.h | 5 + Marlin/configurator/config/Configuration.h | 3 - .../configurator/config/Configuration_adv.h | 5 + .../Felix/Configuration.h | 3 - .../Felix/Configuration_DUAL.h | 7 +- .../Felix/Configuration_adv.h | 5 + .../Hephestos/Configuration.h | 3 - .../Hephestos/Configuration_adv.h | 5 + .../K8200/Configuration.h | 3 - .../K8200/Configuration_adv.h | 5 + .../SCARA/Configuration.h | 3 - .../SCARA/Configuration_adv.h | 5 + .../WITBOX/Configuration.h | 3 - .../WITBOX/Configuration_adv.h | 5 + .../delta/generic/Configuration.h | 3 - .../delta/generic/Configuration_adv.h | 5 + .../delta/kossel_mini/Configuration.h | 3 - .../delta/kossel_mini/Configuration_adv.h | 5 + .../makibox/Configuration.h | 3 - .../makibox/Configuration_adv.h | 5 + .../tvrrug/Round2/Configuration.h | 3 - .../tvrrug/Round2/Configuration_adv.h | 5 + 25 files changed, 59 insertions(+), 440 deletions(-) delete mode 100644 Marlin/Conditionals.h delete mode 100644 Marlin/Conditionals_lcd.h diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h deleted file mode 100644 index d896880622..0000000000 --- a/Marlin/Conditionals.h +++ /dev/null @@ -1,249 +0,0 @@ -/** - * Conditionals.h - * Defines that depend on configuration but are not editable. - */ -#ifndef CONDITIONALS_H - #define CONDITIONALS_H - - #ifndef AT90USB - #define HardwareSerial_h // trick to disable the standard HWserial - #endif - - #if (ARDUINO >= 100) - #include "Arduino.h" - #else - #include "WProgram.h" - #endif - - #include "pins.h" - - /** - * ENDSTOPPULLUPS - */ - #ifdef ENDSTOPPULLUPS - #ifndef DISABLE_MAX_ENDSTOPS - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #endif - #ifndef DISABLE_MIN_ENDSTOPS - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - #endif - #endif - - /** - * Axis lengths - */ - #define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) - #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) - #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) - - /** - * SCARA - */ - #ifdef SCARA - #undef SLOWDOWN - #define QUICK_HOME //SCARA needs Quickhome - #endif - - /** - * AUTOSET LOCATIONS OF LIMIT SWITCHES - * Added by ZetaPhoenix 09-15-2012 - */ - #ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations - #define X_HOME_POS MANUAL_X_HOME_POS - #define Y_HOME_POS MANUAL_Y_HOME_POS - #define Z_HOME_POS MANUAL_Z_HOME_POS - #else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits - #ifdef BED_CENTER_AT_0_0 - #define X_HOME_POS X_MAX_LENGTH * X_HOME_DIR * 0.5 - #define Y_HOME_POS Y_MAX_LENGTH * Y_HOME_DIR * 0.5 - #else - #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS) - #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS) - #endif - #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS) - #endif //!MANUAL_HOME_POSITIONS - - /** - * Auto Bed Leveling - */ - #ifdef ENABLE_AUTO_BED_LEVELING - // Boundaries for probing based on set limits - #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - #endif - - /** - * MAX_STEP_FREQUENCY differs for TOSHIBA - */ - #ifdef CONFIG_STEPPERS_TOSHIBA - #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers - #else - #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) - #endif - - // MS1 MS2 Stepper Driver Microstepping mode table - #define MICROSTEP1 LOW,LOW - #define MICROSTEP2 HIGH,LOW - #define MICROSTEP4 LOW,HIGH - #define MICROSTEP8 HIGH,HIGH - #define MICROSTEP16 HIGH,HIGH - - /** - * Advance calculated values - */ - #ifdef ADVANCE - #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) - #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / EXTRUSION_AREA) - #endif - - #ifdef ULTIPANEL - #undef SDCARDDETECTINVERTED - #endif - - // Power Signal Control Definitions - // By default use ATX definition - #ifndef POWER_SUPPLY - #define POWER_SUPPLY 1 - #endif - // 1 = ATX - #if (POWER_SUPPLY == 1) - #define PS_ON_AWAKE LOW - #define PS_ON_ASLEEP HIGH - #endif - // 2 = X-Box 360 203W - #if (POWER_SUPPLY == 2) - #define PS_ON_AWAKE HIGH - #define PS_ON_ASLEEP LOW - #endif - - /** - * Temp Sensor defines - */ - #if TEMP_SENSOR_0 == -2 - #define HEATER_0_USES_MAX6675 - #elif TEMP_SENSOR_0 == -1 - #define HEATER_0_USES_AD595 - #elif TEMP_SENSOR_0 == 0 - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP - #elif TEMP_SENSOR_0 > 0 - #define THERMISTORHEATER_0 TEMP_SENSOR_0 - #define HEATER_0_USES_THERMISTOR - #endif - - #if TEMP_SENSOR_1 == -1 - #define HEATER_1_USES_AD595 - #elif TEMP_SENSOR_1 == 0 - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP - #elif TEMP_SENSOR_1 > 0 - #define THERMISTORHEATER_1 TEMP_SENSOR_1 - #define HEATER_1_USES_THERMISTOR - #endif - - #if TEMP_SENSOR_2 == -1 - #define HEATER_2_USES_AD595 - #elif TEMP_SENSOR_2 == 0 - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP - #elif TEMP_SENSOR_2 > 0 - #define THERMISTORHEATER_2 TEMP_SENSOR_2 - #define HEATER_2_USES_THERMISTOR - #endif - - #if TEMP_SENSOR_3 == -1 - #define HEATER_3_USES_AD595 - #elif TEMP_SENSOR_3 == 0 - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP - #elif TEMP_SENSOR_3 > 0 - #define THERMISTORHEATER_3 TEMP_SENSOR_3 - #define HEATER_3_USES_THERMISTOR - #endif - - #if TEMP_SENSOR_BED == -1 - #define BED_USES_AD595 - #elif TEMP_SENSOR_BED == 0 - #undef BED_MINTEMP - #undef BED_MAXTEMP - #elif TEMP_SENSOR_BED > 0 - #define THERMISTORBED TEMP_SENSOR_BED - #define BED_USES_THERMISTOR - #endif - - /** - * ARRAY_BY_EXTRUDERS based on EXTRUDERS - */ - #if EXTRUDERS > 3 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 } - #elif EXTRUDERS > 2 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 } - #elif EXTRUDERS > 1 - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 } - #else - #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 } - #endif - - /** - * Shorthand for pin tests, for temperature.cpp - */ - #define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN >= 0) - #define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN >= 0) - #define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN >= 0) - #define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN >= 0) - #define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN >= 0) - #define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN >= 0) - #define HAS_HEATER_0 (defined(HEATER_0_PIN) && HEATER_0_PIN >= 0) - #define HAS_HEATER_1 (defined(HEATER_1_PIN) && HEATER_1_PIN >= 0) - #define HAS_HEATER_2 (defined(HEATER_2_PIN) && HEATER_2_PIN >= 0) - #define HAS_HEATER_3 (defined(HEATER_3_PIN) && HEATER_3_PIN >= 0) - #define HAS_HEATER_BED (defined(HEATER_BED_PIN) && HEATER_BED_PIN >= 0) - #define HAS_AUTO_FAN_0 (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_1 (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_2 (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_3 (defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 - #define HAS_FAN (defined(FAN_PIN) && FAN_PIN >= 0) - - /** - * Helper Macros for heaters and extruder fan - */ - #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v) - #if EXTRUDERS > 1 || defined(HEATERS_PARALLEL) - #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v) - #if EXTRUDERS > 2 - #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v) - #if EXTRUDERS > 3 - #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v) - #endif - #endif - #endif - #ifdef HEATERS_PARALLEL - #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); } - #else - #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v) - #endif - #if HAS_HEATER_BED - #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v) - #endif - #if HAS_FAN - #define WRITE_FAN(v) WRITE(FAN_PIN, v) - #endif - - /** - * Sampling period of the temperature routine - * This override comes originally from temperature.cpp - * The Configuration.h option is basically ignored. - */ - #ifdef PID_dT - #undef PID_dT - #endif - #define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0)) - -#endif //CONDITIONALS_H diff --git a/Marlin/Conditionals_lcd.h b/Marlin/Conditionals_lcd.h deleted file mode 100644 index 6e63934b11..0000000000 --- a/Marlin/Conditionals_lcd.h +++ /dev/null @@ -1,155 +0,0 @@ -/** - * Conditionals_lcd.h - * LCD-oriented defines that depend on configuration. - */ -#ifndef CONDITIONALS_LCD_H - #define CONDITIONALS_LCD_H - - #if defined(MAKRPANEL) - #define DOGLCD - #define SDSUPPORT - #define DEFAULT_LCD_CONTRAST 17 - #define ULTIPANEL - #define NEWPANEL - #endif - - #if defined(miniVIKI) || defined(VIKI2) - #define ULTRA_LCD //general LCD support, also 16x2 - #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - - #ifdef miniVIKI - #define DEFAULT_LCD_CONTRAST 95 - #else - #define DEFAULT_LCD_CONTRAST 40 - #endif - - #define ENCODER_PULSES_PER_STEP 4 - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - #ifdef PANEL_ONE - #define SDSUPPORT - #define ULTIMAKERCONTROLLER - #endif - - #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - #define DOGLCD - #define U8GLIB_ST7920 - #define REPRAP_DISCOUNT_SMART_CONTROLLER - #endif - - #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) - #define ULTIPANEL - #define NEWPANEL - #endif - - #ifdef REPRAPWORLD_KEYPAD - #define ULTIPANEL - #define NEWPANEL - #endif - - #ifdef RA_CONTROL_PANEL - #define LCD_I2C_TYPE_PCA8574 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define ULTIPANEL - #define NEWPANEL - #endif - - /** - * I2C PANELS - */ - - #ifdef LCD_I2C_SAINSMART_YWROBOT - // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) - // Make sure it is placed in the Arduino libraries directory. - #define LCD_I2C_TYPE_PCF8575 - #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define ULTIPANEL - #define NEWPANEL - #endif - - // PANELOLU2 LCD with status LEDs, separate encoder and click inputs - #ifdef LCD_I2C_PANELOLU2 - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) - // Note: The PANELOLU2 encoder click input can either be directly connected to a pin - // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD - - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 4 - #endif - - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 1 - #endif - - #ifdef LCD_USE_I2C_BUZZER - #define LCD_FEEDBACK_FREQUENCY_HZ 1000 - #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 - #endif - - #define ULTIPANEL - #define NEWPANEL - #endif - - // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs - #ifdef LCD_I2C_VIKI - // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) - // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. - // Note: The pause/stop/resume LCD button pin should be connected to the Arduino - // BTN_ENC pin (or set BTN_ENC to -1 if not used) - #define LCD_I2C_TYPE_MCP23017 - #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define ULTIPANEL - #define NEWPANEL - #endif - - // Shift register panels - // --------------------- - // 2 wire Non-latching LCD SR from: - // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection - - #ifdef SAV_3DLCD - #define SR_LCD_2W_NL // Non latching 2 wire shiftregister - #define ULTIPANEL - #define NEWPANEL - #endif - - - #ifdef ULTIPANEL - #define NEWPANEL //enable this if you have a click-encoder panel - #define SDSUPPORT - #define ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the DOG graphic display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - #endif - #else //no panel but just LCD - #ifdef ULTRA_LCD - #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display - #define LCD_WIDTH 22 - #define LCD_HEIGHT 5 - #else - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 - #endif - #endif - #endif - - /** - * Default LCD contrast for dogm-like LCD displays - */ - #if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST) - #define DEFAULT_LCD_CONTRAST 32 - #endif - -#endif //CONDITIONALS_LCD_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9c52f03457..2ba65bc580 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -715,10 +715,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0435a02c49..7d6182bf58 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -471,4 +473,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 9c8a92c9ce..a97e956de6 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -758,10 +758,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h index 6e4941a764..b03402e793 100644 --- a/Marlin/configurator/config/Configuration_adv.h +++ b/Marlin/configurator/config/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + // @section temperature //=========================================================================== @@ -375,4 +377,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 980875caaf..a36fdc4c6e 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -694,10 +694,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index bc31203026..4f52b61f50 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -691,10 +691,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define FILAMENT_LCD_DISPLAY -#include "Conditionals_lcd.h" + + + + #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 0e93dca49c..da2424d642 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -358,4 +360,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 090d0b0470..42bbf24d2b 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -722,10 +722,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 53819e677c..fcdf4d1610 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -342,4 +344,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index f5c32705c9..d259e2d486 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -726,10 +726,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 141f396936..e802338b8f 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -338,4 +340,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 7c14b78ad3..6abdedd2f0 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -752,10 +752,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 391c8058f6..452f8edeb6 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -342,4 +344,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 88eaa884bc..d8e251c393 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -719,10 +719,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 53819e677c..fcdf4d1610 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -342,4 +344,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index bc61694ed1..d8714f704b 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -736,10 +736,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index b2e1c86d4d..a622d4781f 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -342,4 +344,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index c9471bdcf9..f8ac20abf6 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -738,10 +738,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 1ba4861ead..a940e3f3ed 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -341,4 +343,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 5142d339d1..e0b87b48c1 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -717,10 +717,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index eea93e43db..12c3d71d4b 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -339,4 +341,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index c521666774..eb8f41052a 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -724,10 +724,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of -#include "Conditionals_lcd.h" #include "Configuration_adv.h" -#include "Conditionals.h" -#include "SanityCheck.h" #include "thermistortables.h" #endif //CONFIGURATION_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 7fdc38b83c..14d2019cc9 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -1,6 +1,8 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H +#include "Conditionals.h" + //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== @@ -346,4 +348,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st #endif #endif +#include "Conditionals.h" +#include "SanityCheck.h" + #endif //CONFIGURATION_ADV_H From 19df90622b8be6c6bc2605862edf0fc546b68ef8 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 21 Mar 2015 15:40:20 -0700 Subject: [PATCH 09/18] Include Conditionals.h file in update --- Marlin/Conditionals.h | 405 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 405 insertions(+) create mode 100644 Marlin/Conditionals.h diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h new file mode 100644 index 0000000000..fc6d6573ea --- /dev/null +++ b/Marlin/Conditionals.h @@ -0,0 +1,405 @@ +/** + * Conditionals.h + * Defines that depend on configuration but are not editable. + */ +#ifndef CONDITIONALS_H + +#ifndef CONFIGURATION_LCD // Get the LCD defines which are needed first + + #define CONFIGURATION_LCD + + #if defined(MAKRPANEL) + #define DOGLCD + #define SDSUPPORT + #define DEFAULT_LCD_CONTRAST 17 + #define ULTIPANEL + #define NEWPANEL + #endif + + #if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + #ifdef PANEL_ONE + #define SDSUPPORT + #define ULTIMAKERCONTROLLER + #endif + + #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + #define DOGLCD + #define U8GLIB_ST7920 + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #endif + + #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) + #define ULTIPANEL + #define NEWPANEL + #endif + + #ifdef REPRAPWORLD_KEYPAD + #define ULTIPANEL + #define NEWPANEL + #endif + + #ifdef RA_CONTROL_PANEL + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTIPANEL + #define NEWPANEL + #endif + + /** + * I2C PANELS + */ + + #ifdef LCD_I2C_SAINSMART_YWROBOT + // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) + // Make sure it is placed in the Arduino libraries directory. + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTIPANEL + #define NEWPANEL + #endif + + // PANELOLU2 LCD with status LEDs, separate encoder and click inputs + #ifdef LCD_I2C_PANELOLU2 + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) + // Note: The PANELOLU2 encoder click input can either be directly connected to a pin + // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD + + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 4 + #endif + + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + #ifdef LCD_USE_I2C_BUZZER + #define LCD_FEEDBACK_FREQUENCY_HZ 1000 + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 + #endif + + #define ULTIPANEL + #define NEWPANEL + #endif + + // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs + #ifdef LCD_I2C_VIKI + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // Note: The pause/stop/resume LCD button pin should be connected to the Arduino + // BTN_ENC pin (or set BTN_ENC to -1 if not used) + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define ULTIPANEL + #define NEWPANEL + #endif + + // Shift register panels + // --------------------- + // 2 wire Non-latching LCD SR from: + // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection + + #ifdef SAV_3DLCD + #define SR_LCD_2W_NL // Non latching 2 wire shiftregister + #define ULTIPANEL + #define NEWPANEL + #endif + + + #ifdef ULTIPANEL + #define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the DOG graphic display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif + #else //no panel but just LCD + #ifdef ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display + #define LCD_WIDTH 22 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif + #endif + #endif + + /** + * Default LCD contrast for dogm-like LCD displays + */ + #if defined(DOGLCD) && !defined(DEFAULT_LCD_CONTRAST) + #define DEFAULT_LCD_CONTRAST 32 + #endif + +#else // CONFIGURATION_LCD + + #define CONDITIONALS_H + + #ifndef AT90USB + #define HardwareSerial_h // trick to disable the standard HWserial + #endif + + #if (ARDUINO >= 100) + #include "Arduino.h" + #else + #include "WProgram.h" + #endif + + #include "pins.h" + + /** + * ENDSTOPPULLUPS + */ + #ifdef ENDSTOPPULLUPS + #ifndef DISABLE_MAX_ENDSTOPS + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #endif + #ifndef DISABLE_MIN_ENDSTOPS + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + #endif + #endif + + /** + * Axis lengths + */ + #define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) + #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) + #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) + + /** + * SCARA + */ + #ifdef SCARA + #undef SLOWDOWN + #define QUICK_HOME //SCARA needs Quickhome + #endif + + /** + * AUTOSET LOCATIONS OF LIMIT SWITCHES + * Added by ZetaPhoenix 09-15-2012 + */ + #ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations + #define X_HOME_POS MANUAL_X_HOME_POS + #define Y_HOME_POS MANUAL_Y_HOME_POS + #define Z_HOME_POS MANUAL_Z_HOME_POS + #else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits + #ifdef BED_CENTER_AT_0_0 + #define X_HOME_POS X_MAX_LENGTH * X_HOME_DIR * 0.5 + #define Y_HOME_POS Y_MAX_LENGTH * Y_HOME_DIR * 0.5 + #else + #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS) + #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS) + #endif + #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS) + #endif //!MANUAL_HOME_POSITIONS + + /** + * Auto Bed Leveling + */ + #ifdef ENABLE_AUTO_BED_LEVELING + // Boundaries for probing based on set limits + #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #endif + + /** + * MAX_STEP_FREQUENCY differs for TOSHIBA + */ + #ifdef CONFIG_STEPPERS_TOSHIBA + #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers + #else + #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + #endif + + // MS1 MS2 Stepper Driver Microstepping mode table + #define MICROSTEP1 LOW,LOW + #define MICROSTEP2 HIGH,LOW + #define MICROSTEP4 LOW,HIGH + #define MICROSTEP8 HIGH,HIGH + #define MICROSTEP16 HIGH,HIGH + + /** + * Advance calculated values + */ + #ifdef ADVANCE + #define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) + #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / EXTRUSION_AREA) + #endif + + #ifdef ULTIPANEL + #undef SDCARDDETECTINVERTED + #endif + + // Power Signal Control Definitions + // By default use ATX definition + #ifndef POWER_SUPPLY + #define POWER_SUPPLY 1 + #endif + // 1 = ATX + #if (POWER_SUPPLY == 1) + #define PS_ON_AWAKE LOW + #define PS_ON_ASLEEP HIGH + #endif + // 2 = X-Box 360 203W + #if (POWER_SUPPLY == 2) + #define PS_ON_AWAKE HIGH + #define PS_ON_ASLEEP LOW + #endif + + /** + * Temp Sensor defines + */ + #if TEMP_SENSOR_0 == -2 + #define HEATER_0_USES_MAX6675 + #elif TEMP_SENSOR_0 == -1 + #define HEATER_0_USES_AD595 + #elif TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP + #elif TEMP_SENSOR_0 > 0 + #define THERMISTORHEATER_0 TEMP_SENSOR_0 + #define HEATER_0_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_1 == -1 + #define HEATER_1_USES_AD595 + #elif TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP + #elif TEMP_SENSOR_1 > 0 + #define THERMISTORHEATER_1 TEMP_SENSOR_1 + #define HEATER_1_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_2 == -1 + #define HEATER_2_USES_AD595 + #elif TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP + #elif TEMP_SENSOR_2 > 0 + #define THERMISTORHEATER_2 TEMP_SENSOR_2 + #define HEATER_2_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 + #elif TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP + #elif TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR + #endif + + #if TEMP_SENSOR_BED == -1 + #define BED_USES_AD595 + #elif TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP + #elif TEMP_SENSOR_BED > 0 + #define THERMISTORBED TEMP_SENSOR_BED + #define BED_USES_THERMISTOR + #endif + + /** + * ARRAY_BY_EXTRUDERS based on EXTRUDERS + */ + #if EXTRUDERS > 3 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 } + #elif EXTRUDERS > 2 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 } + #elif EXTRUDERS > 1 + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 } + #else + #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 } + #endif + + /** + * Shorthand for pin tests, for temperature.cpp + */ + #define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN >= 0) + #define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN >= 0) + #define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN >= 0) + #define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN >= 0) + #define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN >= 0) + #define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN >= 0) + #define HAS_HEATER_0 (defined(HEATER_0_PIN) && HEATER_0_PIN >= 0) + #define HAS_HEATER_1 (defined(HEATER_1_PIN) && HEATER_1_PIN >= 0) + #define HAS_HEATER_2 (defined(HEATER_2_PIN) && HEATER_2_PIN >= 0) + #define HAS_HEATER_3 (defined(HEATER_3_PIN) && HEATER_3_PIN >= 0) + #define HAS_HEATER_BED (defined(HEATER_BED_PIN) && HEATER_BED_PIN >= 0) + #define HAS_AUTO_FAN_0 (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_1 (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_2 (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN_3 (defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN >= 0) + #define HAS_AUTO_FAN HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 + #define HAS_FAN (defined(FAN_PIN) && FAN_PIN >= 0) + + /** + * Helper Macros for heaters and extruder fan + */ + #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v) + #if EXTRUDERS > 1 || defined(HEATERS_PARALLEL) + #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v) + #if EXTRUDERS > 2 + #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v) + #if EXTRUDERS > 3 + #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v) + #endif + #endif + #endif + #ifdef HEATERS_PARALLEL + #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); } + #else + #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v) + #endif + #if HAS_HEATER_BED + #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v) + #endif + #if HAS_FAN + #define WRITE_FAN(v) WRITE(FAN_PIN, v) + #endif + + /** + * Sampling period of the temperature routine + * This override comes originally from temperature.cpp + * The Configuration.h option is basically ignored. + */ + #ifdef PID_dT + #undef PID_dT + #endif + #define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0)) + + +#endif //CONFIGURATION_LCD +#endif //CONDITIONALS_H From 6bdee87be3525d9219301bdb90d7256d92dd9f3b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 00:27:29 -0700 Subject: [PATCH 10/18] Cleanup temperature code - Get rid of unused temp states in the ISR, resulting in more frequent temperature reading with fewer sensors - Shrink code slightly in min/max testing --- Marlin/temperature.cpp | 215 +++++++++++++++++++++++++---------------- 1 file changed, 132 insertions(+), 83 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 26360a5144..50fc0e3813 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -1240,16 +1240,26 @@ void disable_heater() { enum TempState { PrepareTemp_0, MeasureTemp_0, - PrepareTemp_BED, - MeasureTemp_BED, - PrepareTemp_1, - MeasureTemp_1, - PrepareTemp_2, - MeasureTemp_2, - PrepareTemp_3, - MeasureTemp_3, - Prepare_FILWIDTH, - Measure_FILWIDTH, + #if HAS_TEMP_BED + PrepareTemp_BED, + MeasureTemp_BED, + #endif + #if HAS_TEMP_1 + PrepareTemp_1, + MeasureTemp_1, + #endif + #if HAS_TEMP_2 + PrepareTemp_2, + MeasureTemp_2, + #endif + #if HAS_TEMP_3 + PrepareTemp_3, + MeasureTemp_3, + #endif + #if HAS_FILAMENT_SENSOR + Prepare_FILWIDTH, + Measure_FILWIDTH, + #endif StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle }; @@ -1473,78 +1483,124 @@ ISR(TIMER0_COMPB_vect) { #if HAS_TEMP_0 raw_temp_value[0] += ADC; #endif - temp_state = PrepareTemp_BED; + temp_state = + #if HAS_TEMP_BED + PrepareTemp_BED + #elif HAS_TEMP_1 + PrepareTemp_1 + #elif HAS_TEMP_2 + PrepareTemp_2 + #elif HAS_TEMP_3 + PrepareTemp_3 + #elif HAS_FILAMENT_SENSOR + Prepare_FILWIDTH + #else + PrepareTemp_0 + #endif + ; break; - case PrepareTemp_BED: - #if HAS_TEMP_BED + + #if HAS_TEMP_BED + case PrepareTemp_BED: START_ADC(TEMP_BED_PIN); - #endif - lcd_buttons_update(); - temp_state = MeasureTemp_BED; - break; - case MeasureTemp_BED: - #if HAS_TEMP_BED + lcd_buttons_update(); + temp_state = MeasureTemp_BED; + break; + case MeasureTemp_BED: raw_temp_bed_value += ADC; - #endif - temp_state = PrepareTemp_1; - break; - case PrepareTemp_1: - #if HAS_TEMP_1 + temp_state = + #if HAS_TEMP_1 + PrepareTemp_1 + #elif HAS_TEMP_2 + PrepareTemp_2 + #elif HAS_TEMP_3 + PrepareTemp_3 + #elif HAS_FILAMENT_SENSOR + Prepare_FILWIDTH + #else + PrepareTemp_0 + #endif + ; + break; + #endif + + #if HAS_TEMP_1 + case PrepareTemp_1: START_ADC(TEMP_1_PIN); - #endif - lcd_buttons_update(); - temp_state = MeasureTemp_1; - break; - case MeasureTemp_1: - #if HAS_TEMP_1 + lcd_buttons_update(); + temp_state = MeasureTemp_1; + break; + case MeasureTemp_1: raw_temp_value[1] += ADC; - #endif - temp_state = PrepareTemp_2; - break; - case PrepareTemp_2: - #if HAS_TEMP_2 + temp_state = + #if HAS_TEMP_2 + PrepareTemp_2 + #elif HAS_TEMP_3 + PrepareTemp_3 + #elif HAS_FILAMENT_SENSOR + Prepare_FILWIDTH + #else + PrepareTemp_0 + #endif + ; + break; + #endif + + #if HAS_TEMP_2 + case PrepareTemp_2: START_ADC(TEMP_2_PIN); - #endif - lcd_buttons_update(); - temp_state = MeasureTemp_2; - break; - case MeasureTemp_2: - #if HAS_TEMP_2 + lcd_buttons_update(); + temp_state = MeasureTemp_2; + break; + case MeasureTemp_2: raw_temp_value[2] += ADC; - #endif - temp_state = PrepareTemp_3; - break; - case PrepareTemp_3: - #if HAS_TEMP_3 + temp_state = + #if HAS_TEMP_3 + PrepareTemp_3 + #elif HAS_FILAMENT_SENSOR + Prepare_FILWIDTH + #else + PrepareTemp_0 + #endif + ; + break; + #endif + + #if HAS_TEMP_3 + case PrepareTemp_3: START_ADC(TEMP_3_PIN); - #endif - lcd_buttons_update(); - temp_state = MeasureTemp_3; - break; - case MeasureTemp_3: - #if HAS_TEMP_3 + lcd_buttons_update(); + temp_state = MeasureTemp_3; + break; + case MeasureTemp_3: raw_temp_value[3] += ADC; - #endif - temp_state = Prepare_FILWIDTH; - break; - case Prepare_FILWIDTH: - #if HAS_FILAMENT_SENSOR + temp_state = + #if HAS_FILAMENT_SENSOR + Prepare_FILWIDTH + #else + PrepareTemp_0 + #endif + ; + break; + #endif + + #if HAS_FILAMENT_SENSOR + case Prepare_FILWIDTH: START_ADC(FILWIDTH_PIN); - #endif - lcd_buttons_update(); - temp_state = Measure_FILWIDTH; - break; - case Measure_FILWIDTH: - #if HAS_FILAMENT_SENSOR + lcd_buttons_update(); + temp_state = Measure_FILWIDTH; + break; + case Measure_FILWIDTH: // raw_filwidth_value += ADC; //remove to use an IIR filter approach if (ADC > 102) { //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data. raw_filwidth_value -= (raw_filwidth_value>>7); //multiply raw_filwidth_value by 127/128 raw_filwidth_value += ((unsigned long)ADC<<7); //add new ADC reading } - #endif - temp_state = PrepareTemp_0; - temp_count++; - break; + temp_state = PrepareTemp_0; + temp_count++; + break; + #endif + case StartupDelay: temp_state = PrepareTemp_0; break; @@ -1554,7 +1610,7 @@ ISR(TIMER0_COMPB_vect) { // SERIAL_ERRORLNPGM("Temp measurement error!"); // break; } // switch(temp_state) - + if (temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms. if (!temp_meas_ready) { //Only update the raw values if they have been read. Else we could be updating them during reading. #ifndef HEATER_0_USES_MAX6675 @@ -1579,7 +1635,7 @@ ISR(TIMER0_COMPB_vect) { #if HAS_FILAMENT_SENSOR current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach #endif - + temp_meas_ready = true; temp_count = 0; for (int i = 0; i < EXTRUDERS; i++) raw_temp_value[i] = 0; @@ -1587,44 +1643,39 @@ ISR(TIMER0_COMPB_vect) { #if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP #define GE0 <= - #define LE0 >= #else #define GE0 >= - #define LE0 <= #endif if (current_temperature_raw[0] GE0 maxttemp_raw[0]) max_temp_error(0); - if (current_temperature_raw[0] LE0 minttemp_raw[0]) min_temp_error(0); + if (minttemp_raw[0] GE0 current_temperature_raw[0]) min_temp_error(0); #if EXTRUDERS > 1 #if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP #define GE1 <= - #define LE1 >= #else #define GE1 >= - #define LE1 <= #endif if (current_temperature_raw[1] GE1 maxttemp_raw[1]) max_temp_error(1); - if (current_temperature_raw[1] LE1 minttemp_raw[1]) min_temp_error(1); + if (minttemp_raw[1] GE0 current_temperature_raw[1]) min_temp_error(1); + #if EXTRUDERS > 2 #if HEATER_2_RAW_LO_TEMP > HEATER_2_RAW_HI_TEMP #define GE2 <= - #define LE2 >= #else #define GE2 >= - #define LE2 <= #endif if (current_temperature_raw[2] GE2 maxttemp_raw[2]) max_temp_error(2); - if (current_temperature_raw[2] LE2 minttemp_raw[2]) min_temp_error(2); + if (minttemp_raw[2] GE0 current_temperature_raw[2]) min_temp_error(2); + #if EXTRUDERS > 3 #if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP #define GE3 <= - #define LE3 >= #else #define GE3 >= - #define LE3 <= #endif if (current_temperature_raw[3] GE3 maxttemp_raw[3]) max_temp_error(3); - if (current_temperature_raw[3] LE3 minttemp_raw[3]) min_temp_error(3); + if (minttemp_raw[3] GE0 current_temperature_raw[3]) min_temp_error(3); + #endif // EXTRUDERS > 3 #endif // EXTRUDERS > 2 #endif // EXTRUDERS > 1 @@ -1632,10 +1683,8 @@ ISR(TIMER0_COMPB_vect) { #if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0) #if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP #define GEBED <= - #define LEBED >= #else #define GEBED >= - #define LEBED <= #endif if (current_temperature_bed_raw GEBED bed_maxttemp_raw) { target_temperature_bed = 0; From 37cde8a19170921774fd95bc4450263966e6c7bb Mon Sep 17 00:00:00 2001 From: nicolas-rambaud Date: Mon, 23 Mar 2015 12:29:12 +0100 Subject: [PATCH 11/18] Report changes from previous PR from old code base including : I've updated the minimum values from the LCD. It has been a while that i want to at least fix this. I have an inductive probe and often i need to set my zOffset to something lower than 0.5. With the current implementation, the default LCD value is set to 0.5 for some reason. On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5. Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful. Now we are able to change this value down to 0.0 if needed. I've also changed the minimum value for Z min acceleration. In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent. I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic. --- Marlin/ultralcd.cpp | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 29b3ca118a..19e3d0c504 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -912,9 +912,9 @@ static void lcd_control_motion_menu() { START_MENU(); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); #ifdef ENABLE_AUTO_BED_LEVELING - MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.5, 50); + MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.0, 50); #endif - MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000); + MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 10, 99000); MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990); MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990); @@ -926,7 +926,7 @@ static void lcd_control_motion_menu() { MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates); - MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates); + MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 10, 99000, reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000); MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &travel_acceleration, 100, 99000); From 1fac3886640ac4aa372d7958435f3bef42c51424 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 15:18:22 -0700 Subject: [PATCH 12/18] Revert measurement loop --- Marlin/temperature.cpp | 204 ++++++++++++++++------------------------- 1 file changed, 77 insertions(+), 127 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 50fc0e3813..1582c437a2 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -1145,28 +1145,28 @@ void disable_heater() { for (int i=0; i 1 && HAS_TEMP_1 - target_temperature[1] = 0; - soft_pwm[1] = 0; - WRITE_HEATER_1(LOW); + DISABLE_HEATER(1); #endif #if EXTRUDERS > 2 && HAS_TEMP_2 - target_temperature[2] = 0; - soft_pwm[2] = 0; - WRITE_HEATER_2(LOW); + DISABLE_HEATER(2); #endif #if EXTRUDERS > 3 && HAS_TEMP_3 - target_temperature[3] = 0; - soft_pwm[3] = 0; - WRITE_HEATER_3(LOW); + DISABLE_HEATER(3); #endif #if HAS_TEMP_BED @@ -1240,26 +1240,16 @@ void disable_heater() { enum TempState { PrepareTemp_0, MeasureTemp_0, - #if HAS_TEMP_BED - PrepareTemp_BED, - MeasureTemp_BED, - #endif - #if HAS_TEMP_1 - PrepareTemp_1, - MeasureTemp_1, - #endif - #if HAS_TEMP_2 - PrepareTemp_2, - MeasureTemp_2, - #endif - #if HAS_TEMP_3 - PrepareTemp_3, - MeasureTemp_3, - #endif - #if HAS_FILAMENT_SENSOR - Prepare_FILWIDTH, - Measure_FILWIDTH, - #endif + PrepareTemp_BED, + MeasureTemp_BED, + PrepareTemp_1, + MeasureTemp_1, + PrepareTemp_2, + MeasureTemp_2, + PrepareTemp_3, + MeasureTemp_3, + Prepare_FILWIDTH, + Measure_FILWIDTH, StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle }; @@ -1483,123 +1473,83 @@ ISR(TIMER0_COMPB_vect) { #if HAS_TEMP_0 raw_temp_value[0] += ADC; #endif - temp_state = - #if HAS_TEMP_BED - PrepareTemp_BED - #elif HAS_TEMP_1 - PrepareTemp_1 - #elif HAS_TEMP_2 - PrepareTemp_2 - #elif HAS_TEMP_3 - PrepareTemp_3 - #elif HAS_FILAMENT_SENSOR - Prepare_FILWIDTH - #else - PrepareTemp_0 - #endif - ; + temp_state = PrepareTemp_BED; break; - #if HAS_TEMP_BED - case PrepareTemp_BED: + case PrepareTemp_BED: + #if HAS_TEMP_BED START_ADC(TEMP_BED_PIN); - lcd_buttons_update(); - temp_state = MeasureTemp_BED; - break; - case MeasureTemp_BED: + #endif + lcd_buttons_update(); + temp_state = MeasureTemp_BED; + break; + case MeasureTemp_BED: + #if HAS_TEMP_BED raw_temp_bed_value += ADC; - temp_state = - #if HAS_TEMP_1 - PrepareTemp_1 - #elif HAS_TEMP_2 - PrepareTemp_2 - #elif HAS_TEMP_3 - PrepareTemp_3 - #elif HAS_FILAMENT_SENSOR - Prepare_FILWIDTH - #else - PrepareTemp_0 - #endif - ; - break; - #endif + #endif + temp_state = PrepareTemp_1; + break; - #if HAS_TEMP_1 - case PrepareTemp_1: + case PrepareTemp_1: + #if HAS_TEMP_1 START_ADC(TEMP_1_PIN); - lcd_buttons_update(); - temp_state = MeasureTemp_1; - break; - case MeasureTemp_1: + #endif + lcd_buttons_update(); + temp_state = MeasureTemp_1; + break; + case MeasureTemp_1: + #if HAS_TEMP_1 raw_temp_value[1] += ADC; - temp_state = - #if HAS_TEMP_2 - PrepareTemp_2 - #elif HAS_TEMP_3 - PrepareTemp_3 - #elif HAS_FILAMENT_SENSOR - Prepare_FILWIDTH - #else - PrepareTemp_0 - #endif - ; - break; - #endif + #endif + temp_state = PrepareTemp_2; + break; - #if HAS_TEMP_2 - case PrepareTemp_2: + case PrepareTemp_2: + #if HAS_TEMP_2 START_ADC(TEMP_2_PIN); - lcd_buttons_update(); - temp_state = MeasureTemp_2; - break; - case MeasureTemp_2: + #endif + lcd_buttons_update(); + temp_state = MeasureTemp_2; + break; + case MeasureTemp_2: + #if HAS_TEMP_2 raw_temp_value[2] += ADC; - temp_state = - #if HAS_TEMP_3 - PrepareTemp_3 - #elif HAS_FILAMENT_SENSOR - Prepare_FILWIDTH - #else - PrepareTemp_0 - #endif - ; - break; - #endif + #endif + temp_state = PrepareTemp_3; + break; - #if HAS_TEMP_3 - case PrepareTemp_3: + case PrepareTemp_3: + #if HAS_TEMP_3 START_ADC(TEMP_3_PIN); - lcd_buttons_update(); - temp_state = MeasureTemp_3; - break; - case MeasureTemp_3: + #endif + lcd_buttons_update(); + temp_state = MeasureTemp_3; + break; + case MeasureTemp_3: + #if HAS_TEMP_3 raw_temp_value[3] += ADC; - temp_state = - #if HAS_FILAMENT_SENSOR - Prepare_FILWIDTH - #else - PrepareTemp_0 - #endif - ; - break; - #endif + #endif + temp_state = Prepare_FILWIDTH; + break; - #if HAS_FILAMENT_SENSOR - case Prepare_FILWIDTH: + case Prepare_FILWIDTH: + #if HAS_FILAMENT_SENSOR START_ADC(FILWIDTH_PIN); - lcd_buttons_update(); - temp_state = Measure_FILWIDTH; - break; - case Measure_FILWIDTH: + #endif + lcd_buttons_update(); + temp_state = Measure_FILWIDTH; + break; + case Measure_FILWIDTH: + #if HAS_FILAMENT_SENSOR // raw_filwidth_value += ADC; //remove to use an IIR filter approach if (ADC > 102) { //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data. raw_filwidth_value -= (raw_filwidth_value>>7); //multiply raw_filwidth_value by 127/128 raw_filwidth_value += ((unsigned long)ADC<<7); //add new ADC reading } - temp_state = PrepareTemp_0; - temp_count++; - break; - #endif + #endif + temp_state = PrepareTemp_0; + temp_count++; + break; case StartupDelay: temp_state = PrepareTemp_0; From b1a7f74ee4cef4e5e40c76318078cb13fc076a8c Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 18:25:31 -0700 Subject: [PATCH 13/18] A logo for the Marlin wiki --- Documentation/Logo/marlinwiki.png | Bin 0 -> 6871 bytes 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100755 Documentation/Logo/marlinwiki.png diff --git a/Documentation/Logo/marlinwiki.png b/Documentation/Logo/marlinwiki.png new file mode 100755 index 0000000000000000000000000000000000000000..23588b24833d781e433d2ba3212af3c56de7ba8a GIT binary patch literal 6871 zcmaJ_by!tFl)p%KNS8FyDcuk0Zjcb9>(L;MbVxlKL6CZMKUyj2M!H)X0qNN1?q9q6 z?cQ(Z&Yd}D@|^QKXKu8HnmjfJIR*d#*oq3WTJSRRUq(ZLzs2^H{t?h!6b#(~0Q2R) zi~wYPAq4;obvqD9L&FyA0d}_qyU-|tKr}9HU~4-^D**6W%+a>d(cUK(zh1qRQH}~u zQ3h)fq0wl`#0C>4F|pF3<0(ba<}VOwcHzH$i$pPy7ljxf9~?)d$&M9+F^{@U`z=1S zAS!0)e#5W8VYdBxcl4=oPGYa(BBy>FwG$01O@UAIO)yre3^o3GXn$|t#x|!^2nK@- zfQMFZN$dVdj{w{Riixq&b)tR;5PYUF(ST0X>`rdV$Ywv|vI& z$~Ru77?6@f2+ql1(gyO7fcL{6EVcj*4&Xg=(C#!4oO6@uhXA}wp(R4dO9E(KT1CkM zwxU4AxL(X#zQk>l%Gs$>E z_;J@SMgSl$i3q;ii$|X^oT{-gfp{2>8OOm7lxI2%i>;@f@p2a_0NC&doP1*EswWQ? zMG1C#`o?&IWNV6<=Xo7#U56{x2;}WA>R-70JDa!pi7g8YJKNjyO1(1g%!l*?o@~0! zI`tnNZv(|1uK%uo-((2kH3^YNx>@fYxl}2l98X3Mvsm6ukbh{xe14#srt4L-Xfa?V z+|nd)jhD@eyWlONiI~IO_M-uSY+eX!jWoq&7b$xu z3S}4aau?>qdx0<+hTd)&JQ)njU`n_5EES(*UPp}9P_e$}`Xxoh->GRE0dc|M?AC3@ z5qH78Ge^tqdfgs^jwC&R_R^eoF$%#V#(+K^jU+SthPF!qi6EANW-y9SlTJD5jRKEW zj1G;i0@b;=+Y8}HW4YEO(E)(>(?dkNJWonUou>FNtVU1^RFFJO?i=QWr3X(|0&!mU zgj)l-c$`4~-bA@A?qY%jsGqy@Hz_J#uOl~SUyn?!5IZ{L!*DHK1y*? zFHfX_0z3UILBdNeJijPVuOI_KG>DhECGmw~ZK2K-!Ia#Tvljh6ducYm0y#ZoaM9AC z4plgXorY~7d^=~mXPa-EVw?8-9Y&6YlxyLQ_U3D?A$ujV9lRa>9Tck!UTNKeEUgu2 zz7GDI1S6Tse3(|XW+e0_zh{>4XehCwa#7{C)M;{C65DIL>fau%_$#T@YUvaDQ^Wi6 zztevsUV39;M-YYfN7=k4%O*u7wITB+tCYz2W>(}8Hl(1aSpA8T zhA>ibcb~kN=>x`s^oO}w6{vpf2Eb{mgQ(1YEx+2l!`(l z%WR-v9m&E#!^db8!yc6$bx@&ZUai?ydmjzv2eNt}c3KDQ@(9n6H@!@?qYM6CtZf;O zRBf^1Wu^JTAU-8N{d%p76l+P;tqj+jFCJ>>d#_8B#a^F>}fA(uasbv5UYxd{H@|F zb10(7Zrv;?>8|9jJeC1UJr)DX64n^0*v~hv zU@S#hJ5Z5Jp-V1&7Da}%&)234r>*G>LB$Ho5nqQt`A&E`jvAv zO-0^i*XE}r5?2y#U$-Q-!~|D)R}IZZ1Us7snugVTz`17OYoH+dXUk{b=SiR>m=VDS zF*-y#B+%V~}H@=%`F7%*k3M;OzK)?cw+$ax-TWbIXq;gKNOV z_honqaVaMOyGWXpN|c&V%9%7CE0j2n@%*JXV?4&kZmMn@I<859$*6gdF)Ov&xdN-I zZ}L%6`RUt5&1DjoI zui*--@Vcj;&aq8g)TyY04)uu@$c7vkFqz`tI!3SOSW)Y2tn{saj7AR$rVDeRU2r=y%`qb5k;Bbhki?I_PaJW2oY@%+!Ww_R8eixBLAwd)!Q$@H$l1>yf z|9aVHhawU@^doaQrJ=OEx5aYYddhl#ca!2>dk>IfUW!aOW!8Fi|ohk{cH5KYiewfMXxx&iVf81S6);$R9yBlS?5`D z+1gq6?=0T6s*gxa&K|7#KFBYK@M$Za$Hvs#=h!{bcF{58^Jb6px}}|$`px=T)goq22ObAvPmpQ#{qX zKB;V1Z#TP?I+k7ltwhd9zI$4pKV1&8@AS^Qm|T{>MhOoce@gnBfD1xS$V?cHz>YY~ z6_OAZ-jsBE++YleKIp^8V|uA~f86E0>`irAu!gI??N1Z*`q}oj_OJFt$vuP&0(nM4%(!^?z{jx! zk2h&PC}^nyfG;Be1cw5^?K8aG2LMlQ062IL03sOxKmtxS`zZ$icrO%XrFDE3k4*ej z2=$kqYhPo2T3WfoFwkdVgA(!&EF$w55!&DVgq5n^*gGk!q8Vi|6|(A<)@o+!jixs= z2oP7Ot`&oQYik!%@WK)WQodKY%}hD5W9HlM6hmp;RxTbVO+-Z9t-Y>L+JTI8VRdD-rIGCi74yQ_*9AOsjK59dFSP3X;S}J*x1+%oSgCVyJIh3$qcNu z*CcNRIU=LtP|}EtiyxKUNh(lWolI<|Fmyo9nT6LT6z#mD0; zVE6a+O-xUN5-LVBLR#GSVqnK7Cw(_JLXGUayaZicT?o?gH#a^FFqoSES3Vn@*0#2M zjS0kQ6BCmf19pw_88l2xce|0RE3XQpMhtkXvmYDGD%`fwh*wPPD20}goLuRV-K15g zVFf;DbaXVn)BO_o2Xb7Qx}svO_MAvgd|X0;_F;T{d@?d7apJ^;hTHkJVtRjr0efM2 zd2Co@q~FMHqH6r+rbTi}imb(l4~(b^Dk=W|y_gI@4)7#JCoUNWnx zP`G8NFtr^L5D~q_p%U4ioo9kX+cqu^()TCP%YPwv>50HDtgLjBnI9QZS#Ww4cw??* zY%InxpsBCVEc9IYuBlc0DM9i{L9fDKBfyQ2gydzT(eb6!xWqlXu+JII$Ai+6FU}NX zWQy^xB&pA~n|=O#TVFQw*+5Ph(9qPBo~lG?2cr5 znXh1yaH{xA2Hf$heU;#_P0!7ZheDyzr*O%==HenDt-8Ivh0CRHD?u{;?CdP~(jML| zR5e>*f$CkGSEc;jYK=K!cTZ2P!yM-q$)MFDv{LAHK^~KehSUJ+b@WodK(RmsbNEhIL4djg4ryxaqHKTnmMbjEs;*7TZ7a z?H?Q@dz4g}cCb#+prfO2!!>-6Y|VO;DY&O|g^Mta1$zNc-gy!tzxQKjD5?eBtw zahv z+v(=fLjA=X`s%`mz12GPSop&=3h29H?QOP)7>qzAT41dR?*PFf8K*D*<2`0 zPCvBG*-&wOKEFER;HSrS41d9y|9MUI0~Bn^e+#> z1!`}opn#U^vx!dnSq`2Gi;Dhc&vE0N>^&^%@*7vtL zA%K*cT71uqqN5`_%y}gSj*KIv-*s7u+}zz658+^ohh|CuujLQnQ}^!lvs8}TF;-`gu&SW;5Z+&q8cqpXaH zLn#!TM!Zoj%gf7K6Zq(BA0+wwz;|^D_n~l2Unz*-CAmIX>B;1?fqQkyT2B!BwkoE< zBwa@wrPx2uemGYx@9EjN;tClI14ZJXAFOrw>8DVRj*h~i`6}kixa6~##N(xQ*HbRs zvCLPEp}z8`vGuz>xB4RDIdn4rD(InWU<1uzwxTQDEHFAQ4$JTq>LMW7t1aYz!)-m9 z75aNxT;gV&!_nMIe*GF;YXJS2M@vf!EiVW8`?p&L!6O{+g|jxec$P>$F2S6< zl+j5-Lqj?Dnqy2zY7aR)IpN%&vPWS0UL{(k4?lkW((!+~-HVEjuFZzVl5k;0N*h@bKj^7ZVdoZEY8rcQmMl@z%MZFvE=J&yYjE6_V@u7TJ;#~9a&<{sO`16fS3o9gYb=5Q_ zCB+5z(Qi}oYO!QL7LI?30ryv~7xIS)VngcOD8UQB(+h5#V7MhF=H^mQ&CT^!Sp?@- zS0`LvUM7C}^n!w=uhLy|shAs$_DB~pjbBhJ^=8+ zYEi7)+S_loc47mjz?tayue@YLyzi@bPF{+L821&6FMtu?X_&)97Kd{__75U%G!Xcb ztpOg^B4Qt1>yeTQ|G(+K$YMZ~cRTXgA?_vMg*XwFGKV<7rToJ00lkgGY+@$il?BC< znhP!PJt^Y>yneG&?Q532u+l;}a?DRJPi*yxZG}cYjcf48&JC$owCjs8t1Zdbh~wEJ zL_n!B=n(krZ(zMvC;WibAP#XN@J!G+IDofUyEjJ@#QT2VDO{=X!$>1q;N{Ei;hSg? zs?~mrWB8vH+id=sqkdjLRUIwNMtqc7?XIr^|k*%z|}^BC+Y_FRXV{@U}F?Twcf zxZ~?=wRacB;QW;7+*6i`zR5oaI);Z<7x4@2z-L_)b>w<4L?IQjSiilcz8zBt>)|cT zb@}&T@bqz{ zi&8(ZqPdx8k`p(OA7N8+ltxDD`PTi+iHmCI%gr$TD2ltHb&#tSuIR@3A1<1v%7rdV z-PU!ZgLVa+C!{%HMXx5ytDjaslYGNNr69Q_M&&*vZ?}3gbk(3>und?{;Cfl9Qm&-j z`KYkx-8S?aw;7JGElf5IQGGB%TVfO8pwb%_v6tx-`L*la_Ig{UA@86j*lCF=)W8r2 zZJ(`o9%q9u%T5*NDW?J=Joq;ydMsJGOoCY)5lj;+A17g25s?JyJ{fS6!a6}}8m!U3 zlqh@y)8y}C31W(98l>$%nTSm+&9(V^NQqZ&9}_KoAydb5n{fRYLHSU`I2_&fV<=>H z^5SHwlujNN=2sTtLB83*EZ@-^reufn>~fL}Qxl27+_BSGlBfAn+jB{vh7_6m4_ z*2?=gl}b%UQ$dLjvbJK}FIHiz>arC6k~lH4~tJ36`z0kw}G62SUJ|5 z>@3ipwA%o!4U5%nsYf!6_DhxQ!bS! z?sj0;K2JmIpw(ZOp9j!e-RAHz%VuYKx0Rw5ld^9P51KiLkH)jJ;yWd{>To-shaA&K zr@8%TxGbIBJ>L*SaB}3V6Fv=Y5xQ5~Epgn8NA@np7IEveu++S)0$-MvcAGoXq=l}o! literal 0 HcmV?d00001 From fc53e43de6e849be2001c70d604fd2a56948a491 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 20:55:48 -0700 Subject: [PATCH 14/18] Don't test raw temp for MAX6675 - Remove test of raw temp for thermistor 0 when using MAX6675 - Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT` --- Marlin/temperature.cpp | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 1582c437a2..cf431cc6f4 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -177,7 +177,7 @@ static volatile bool temp_meas_ready = false; // Init min and max temp with extreme values to prevent false errors during startup static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP); static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP); -static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0, 0, 0, 0 ); +static int minttemp[EXTRUDERS] = { 0 }; static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383, 16383 ); //static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */ #ifdef BED_MAXTEMP @@ -197,8 +197,8 @@ static float analog2tempBed(int raw); static void updateTemperaturesFromRawValues(); #ifdef WATCH_TEMP_PERIOD - int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0); - unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0); + int watch_start_temp[EXTRUDERS] = { 0 }; + unsigned long watchmillis[EXTRUDERS] = { 0 }; #endif //WATCH_TEMP_PERIOD #ifndef SOFT_PWM_SCALE @@ -661,12 +661,6 @@ void manage_heater() { updateTemperaturesFromRawValues(); - #ifdef HEATER_0_USES_MAX6675 - float ct = current_temperature[0]; - if (ct > min(HEATER_0_MAXTEMP, 1023)) max_temp_error(0); - if (ct < max(HEATER_0_MINTEMP, 0.01)) min_temp_error(0); - #endif //HEATER_0_USES_MAX6675 - unsigned long ms = millis(); // Loop through all extruders @@ -1257,9 +1251,15 @@ enum TempState { // Timer 0 is shared with millies // ISR(TIMER0_COMPB_vect) { + #ifdef TEMP_SENSOR_1_AS_REDUNDANT + #define TEMP_SENSOR_COUNT 2 + #else + #define TEMP_SENSOR_COUNT EXTRUDERS + #endif + //these variables are only accesible from the ISR, but static, so they don't lose their value static unsigned char temp_count = 0; - static unsigned long raw_temp_value[EXTRUDERS] = { 0 }; + static unsigned long raw_temp_value[TEMP_SENSOR_COUNT] = { 0 }; static unsigned long raw_temp_bed_value = 0; static TempState temp_state = StartupDelay; static unsigned char pwm_count = BIT(SOFT_PWM_SCALE); @@ -1588,16 +1588,22 @@ ISR(TIMER0_COMPB_vect) { temp_meas_ready = true; temp_count = 0; - for (int i = 0; i < EXTRUDERS; i++) raw_temp_value[i] = 0; + for (int i = 0; i < TEMP_SENSOR_COUNT; i++) raw_temp_value[i] = 0; raw_temp_bed_value = 0; - #if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP - #define GE0 <= + #ifdef HEATER_0_USES_MAX6675 + float ct = current_temperature[0]; + if (ct > min(HEATER_0_MAXTEMP, 1023)) max_temp_error(0); + if (ct < max(HEATER_0_MINTEMP, 0.01)) min_temp_error(0); #else - #define GE0 >= + #if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP + #define GE0 <= + #else + #define GE0 >= + #endif + if (current_temperature_raw[0] GE0 maxttemp_raw[0]) max_temp_error(0); + if (minttemp_raw[0] GE0 current_temperature_raw[0]) min_temp_error(0); #endif - if (current_temperature_raw[0] GE0 maxttemp_raw[0]) max_temp_error(0); - if (minttemp_raw[0] GE0 current_temperature_raw[0]) min_temp_error(0); #if EXTRUDERS > 1 #if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP From 8dd94ccf58705761d76cbca9e9a1d242e94ac41b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 21:54:06 -0700 Subject: [PATCH 15/18] Initial list from perusing the commit logs --- Documentation/changelog.md | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/Documentation/changelog.md b/Documentation/changelog.md index 8b13789179..5adf38b61e 100644 --- a/Documentation/changelog.md +++ b/Documentation/changelog.md @@ -1 +1,30 @@ +### Version 1.0.3 +* Reduced code size, maybe a lot depending on your configuration. +* Improved support for Delta, SCARA, and COREXY kinematics. +* Move parts of Configuration files to `Conditionals.h` and `SanityCheck.h`. +* Clean up of temperature code. +* Enhanced `G29` with improved grid bed leveling based on Roxy code. See documentation. +* Various bugs fixed from 1.0.2. +* EEPROM layout updated to `V17`. +* Added `M204` travel acceleration options. +* `M204` "P" parameter replaces "`S`." "`S`" retained for backward compatibility. +* Support for more RAMPS-based boards. +* Configurator utility under development. +* `M404` "`N`" parameter replaced with "`W`." ("`N`" is for line numbers only). +* Much cleanup of the code. +* Improved support for Cyrillic and accented languages. +* LCD controller knob acceleration. +* Improved compatibility with various sensors, MAX6675 thermocouple. +* Filament runout sensor support. +* Filament width measurement support. +* Support for TMC and L6470 stepper drivers. +* Better support of G-Code `;` comments, `\`, `N` line numbers, and `*` checksums. +* Moved GCode handling code into individual functions per-code. +### Version 1.0.2 +* Progress bar for character-based LCD displays. + +### Version 1.0.1 + +### Version 1.0.0 +* Initial release From c6df5f4d852d401944aef603ab6f20e5e5580f35 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 23 Mar 2015 21:55:03 -0700 Subject: [PATCH 16/18] small text correction --- Documentation/changelog.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/changelog.md b/Documentation/changelog.md index 5adf38b61e..393b404df2 100644 --- a/Documentation/changelog.md +++ b/Documentation/changelog.md @@ -7,7 +7,7 @@ * Various bugs fixed from 1.0.2. * EEPROM layout updated to `V17`. * Added `M204` travel acceleration options. -* `M204` "P" parameter replaces "`S`." "`S`" retained for backward compatibility. +* `M204` "`P`" parameter replaces "`S`." "`S`" retained for backward compatibility. * Support for more RAMPS-based boards. * Configurator utility under development. * `M404` "`N`" parameter replaced with "`W`." ("`N`" is for line numbers only). From 0ce35766855c53c95df9d7e065f774534937df96 Mon Sep 17 00:00:00 2001 From: alexborro Date: Tue, 24 Mar 2015 14:06:44 -0300 Subject: [PATCH 17/18] New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well. --- Marlin/ConfigurationStore.cpp | 22 +++++++ Marlin/Configuration_adv.h | 27 ++++++++- Marlin/Marlin.h | 2 + Marlin/Marlin_main.cpp | 51 +++++++++++++++- Marlin/language.h | 1 + Marlin/pins.h | 29 +++++++++ Marlin/stepper.cpp | 109 +++++++++++++++++++++++++++++----- Marlin/stepper.h | 6 ++ 8 files changed, 228 insertions(+), 19 deletions(-) diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index 29cc0412ae..fc485e2262 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -67,6 +67,9 @@ * * filament_size (x4) * + * Z_DUAL_ENDSTOPS + * z_endstop_adj + * */ #include "Marlin.h" #include "language.h" @@ -165,6 +168,10 @@ void Config_StoreSettings() { EEPROM_WRITE_VAR(i, delta_radius); // 1 float EEPROM_WRITE_VAR(i, delta_diagonal_rod); // 1 float EEPROM_WRITE_VAR(i, delta_segments_per_second); // 1 float + #elif defined(Z_DUAL_ENDSTOPS) + EEPROM_WRITE_VAR(i, z_endstop_adj); // 1 floats + dummy = 0.0f; + for (int q=5; q--;) EEPROM_WRITE_VAR(i, dummy); #else dummy = 0.0f; for (int q=6; q--;) EEPROM_WRITE_VAR(i, dummy); @@ -326,7 +333,12 @@ void Config_RetrieveSettings() { EEPROM_READ_VAR(i, delta_radius); // 1 float EEPROM_READ_VAR(i, delta_diagonal_rod); // 1 float EEPROM_READ_VAR(i, delta_segments_per_second); // 1 float + #elif defined(Z_DUAL_ENDSTOPS) + EEPROM_READ_VAR(i, z_endstop_adj); + dummy = 0.0f; + for (int q=5; q--;) EEPROM_READ_VAR(i, dummy); #else + dummy = 0.0f; for (int q=6; q--;) EEPROM_READ_VAR(i, dummy); #endif @@ -459,6 +471,8 @@ void Config_ResetDefault() { delta_diagonal_rod = DELTA_DIAGONAL_ROD; delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND; recalc_delta_settings(delta_radius, delta_diagonal_rod); + #elif defined(Z_DUAL_ENDSTOPS) + z_endstop_adj = 0; #endif #ifdef ULTIPANEL @@ -629,6 +643,14 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOPAIR(" R", delta_radius ); SERIAL_ECHOPAIR(" S", delta_segments_per_second ); SERIAL_EOL; + #elif defined(Z_DUAL_ENDSTOPS) + SERIAL_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Z2 Endstop adjustement (mm):"); + SERIAL_ECHO_START; + } + SERIAL_ECHOPAIR(" M666 Z", z_endstop_adj ); + SERIAL_EOL; #endif // DELTA #ifdef PIDTEMP diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 7d6182bf58..721074e23c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -98,7 +98,32 @@ // Only a few motherboards support this, like RAMPS, which have dual extruder support (the 2nd, often unused, extruder driver is used // to control the 2nd Z axis stepper motor). The pins are currently only defined for a RAMPS motherboards. // On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder. -//#define Z_DUAL_STEPPER_DRIVERS +#define Z_DUAL_STEPPER_DRIVERS + +#ifdef Z_DUAL_STEPPER_DRIVERS + +// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. +// That way the machine is capable to align the bed during home, since both Z steppers are homed. +// There is also an implementation of M666 (software endstops adjustment) to this feature. +// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. +// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. +// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. +// Play a little bit with small adjustments (0.5mm) and check the behaviour. +// The M119 (endstops report) will start reporting the Z2 Endstop as well. + +#define Z_DUAL_ENDSTOPS + +#ifdef Z_DUAL_ENDSTOPS + #define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis. + #define Z2_DIR_PIN E2_DIR_PIN + #define Z2_ENABLE_PIN E2_ENABLE_PIN + #define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36) + const bool Z2_MAX_ENDSTOP_INVERTING = false; + #define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis. +#endif + + +#endif // Same again but for Y Axis. //#define Y_DUAL_STEPPER_DRIVERS diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index cc1f111188..bbd7ac3dbb 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -242,6 +242,8 @@ extern float home_offset[3]; extern float delta_diagonal_rod; extern float delta_segments_per_second; void recalc_delta_settings(float radius, float diagonal_rod); +#elif defined(Z_DUAL_ENDSTOPS) +extern float z_endstop_adj; #endif #ifdef SCARA extern float axis_scaling[3]; // Build size scaling diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 5109118190..3316862add 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -248,6 +248,8 @@ float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 }; float home_offset[3] = { 0, 0, 0 }; #ifdef DELTA float endstop_adj[3] = { 0, 0, 0 }; +#elif defined(Z_DUAL_ENDSTOPS) + float z_endstop_adj = 0; #endif float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; @@ -973,7 +975,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); static float x_home_pos(int extruder) { if (extruder == 0) - return base_home_pos(X_AXIS) + add_homing[X_AXIS]; + return base_home_pos(X_AXIS) + home_offset[X_AXIS]; else // In dual carriage mode the extruder offset provides an override of the // second X-carriage offset when homed - otherwise X2_HOME_POS is used. @@ -1487,6 +1489,9 @@ static void homeaxis(int axis) { } #endif #endif // Z_PROBE_SLED + #ifdef Z_DUAL_ENDSTOPS + if (axis==Z_AXIS) In_Homing_Process(true); + #endif destination[axis] = 1.5 * max_length(axis) * axis_home_dir; feedrate = homing_feedrate[axis]; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); @@ -1512,6 +1517,27 @@ static void homeaxis(int axis) { plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); st_synchronize(); + #ifdef Z_DUAL_ENDSTOPS + if (axis==Z_AXIS) + { + feedrate = homing_feedrate[axis]; + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + if (axis_home_dir > 0) + { + destination[axis] = (-1) * fabs(z_endstop_adj); + if (z_endstop_adj > 0) Lock_z_motor(true); else Lock_z2_motor(true); + } else { + destination[axis] = fabs(z_endstop_adj); + if (z_endstop_adj < 0) Lock_z_motor(true); else Lock_z2_motor(true); + } + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); + st_synchronize(); + Lock_z_motor(false); + Lock_z2_motor(false); + In_Homing_Process(false); + } + #endif + #ifdef DELTA // retrace by the amount specified in endstop_adj if (endstop_adj[axis] * axis_home_dir < 0) { @@ -1754,7 +1780,7 @@ inline void gcode_G28() { enable_endstops(true); - for (int i = X_AXIS; i <= Z_AXIS; i++) destination[i] = current_position[i]; + for (int i = X_AXIS; i <= NUM_AXIS; i++) destination[i] = current_position[i]; feedrate = 0.0; @@ -1944,7 +1970,7 @@ inline void gcode_G28() { if (code_seen(axis_codes[Z_AXIS]) && code_value_long() != 0) current_position[Z_AXIS] = code_value() + home_offset[Z_AXIS]; - #ifdef ENABLE_AUTO_BED_LEVELING + #if defined(ENABLE_AUTO_BED_LEVELING) && (Z_HOME_DIR < 0) if (home_all_axis || code_seen(axis_codes[Z_AXIS])) current_position[Z_AXIS] += zprobe_zoffset; //Add Z_Probe offset (the distance is negative) #endif @@ -3452,6 +3478,11 @@ inline void gcode_M119() { SERIAL_PROTOCOLPGM(MSG_Z_MAX); SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif + #if defined(Z2_MAX_PIN) && Z2_MAX_PIN > -1 + SERIAL_PROTOCOLPGM(MSG_Z2_MAX); + SERIAL_PROTOCOLLN(((READ(Z2_MAX_PIN)^Z2_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); + #endif + } /** @@ -3645,6 +3676,16 @@ inline void gcode_M206() { } } } +#elif defined(Z_DUAL_ENDSTOPS) + /** + * M666: For Z Dual Endstop setup, set z axis offset to the z2 axis. + */ + inline void gcode_M666() { + if (code_seen('Z')) z_endstop_adj = code_value(); + SERIAL_ECHOPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj ); + SERIAL_EOL; + } + #endif // DELTA #ifdef FWRETRACT @@ -4894,6 +4935,10 @@ void process_commands() { case 666: // M666 set delta endstop adjustment gcode_M666(); break; + #elif defined(Z_DUAL_ENDSTOPS) + case 666: // M666 set delta endstop adjustment + gcode_M666(); + break; #endif // DELTA #ifdef FWRETRACT diff --git a/Marlin/language.h b/Marlin/language.h index 387e1e3ef0..9e348c929f 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -128,6 +128,7 @@ #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " +#define MSG_Z2_MAX "z2_max: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" diff --git a/Marlin/pins.h b/Marlin/pins.h index 88c5cc78cb..939dab5e66 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -178,6 +178,35 @@ #define Z_MIN_PIN -1 #endif +#ifdef DISABLE_XMAX_ENDSTOP + #undef X_MAX_PIN + #define X_MAX_PIN -1 +#endif + +#ifdef DISABLE_XMIN_ENDSTOP + #undef X_MIN_PIN + #define X_MIN_PIN -1 +#endif + +#ifdef DISABLE_YMAX_ENDSTOP + #define Y_MAX_PIN -1 +#endif + +#ifdef DISABLE_YMIN_ENDSTOP + #undef Y_MIN_PIN + #define Y_MIN_PIN -1 +#endif + +#ifdef DISABLE_ZMAX_ENDSTOP + #undef Z_MAX_PIN + #define Z_MAX_PIN -1 +#endif + +#ifdef DISABLE_ZMIN_ENDSTOP + #undef Z_MIN_PIN + #define Z_MIN_PIN -1 +#endif + #define SENSITIVE_PINS { 0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \ HEATER_BED_PIN, FAN_PIN, \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS \ diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index d3651b6b41..8be4b98af4 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -48,6 +48,12 @@ block_t *current_block; // A pointer to the block currently being traced static unsigned char out_bits; // The next stepping-bits to be output static unsigned int cleaning_buffer_counter; +#ifdef Z_DUAL_ENDSTOPS + static bool performing_homing = false, + locked_z_motor = false, + locked_z2_motor = false; +#endif + // Counter variables for the bresenham line tracer static long counter_x, counter_y, counter_z, counter_e; volatile static unsigned long step_events_completed; // The number of step events executed in the current block @@ -84,7 +90,13 @@ static bool old_x_min_endstop = false, old_y_min_endstop = false, old_y_max_endstop = false, old_z_min_endstop = false, + #ifndef Z_DUAL_ENDSTOPS old_z_max_endstop = false; + #else + old_z_max_endstop = false, + old_z2_min_endstop = false, + old_z2_max_endstop = false; + #endif static bool check_endstops = true; @@ -128,7 +140,23 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; #ifdef Z_DUAL_STEPPER_DRIVERS #define Z_APPLY_DIR(v,Q) { Z_DIR_WRITE(v); Z2_DIR_WRITE(v); } - #define Z_APPLY_STEP(v,Q) { Z_STEP_WRITE(v); Z2_STEP_WRITE(v); } + #ifdef Z_DUAL_ENDSTOPS + #define Z_APPLY_STEP(v,Q) \ + if (performing_homing) { \ + if (Z_HOME_DIR > 0) {\ + if (!(old_z_max_endstop && (count_direction[Z_AXIS] > 0)) && !locked_z_motor) Z_STEP_WRITE(v); \ + if (!(old_z2_max_endstop && (count_direction[Z_AXIS] > 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \ + } else {\ + if (!(old_z_min_endstop && (count_direction[Z_AXIS] < 0)) && !locked_z_motor) Z_STEP_WRITE(v); \ + if (!(old_z2_min_endstop && (count_direction[Z_AXIS] < 0)) && !locked_z2_motor) Z2_STEP_WRITE(v); \ + } \ + } else { \ + Z_STEP_WRITE(v); \ + Z2_STEP_WRITE(v); \ + } + #else + #define Z_APPLY_STEP(v,Q) Z_STEP_WRITE(v), Z2_STEP_WRITE(v) + #endif #else #define Z_APPLY_DIR(v,Q) Z_DIR_WRITE(v) #define Z_APPLY_STEP(v,Q) Z_STEP_WRITE(v) @@ -465,28 +493,66 @@ ISR(TIMER1_COMPA_vect) { } if (TEST(out_bits, Z_AXIS)) { // -direction - Z_DIR_WRITE(INVERT_Z_DIR); - #ifdef Z_DUAL_STEPPER_DRIVERS - Z2_DIR_WRITE(INVERT_Z_DIR); - #endif - + Z_APPLY_DIR(INVERT_Z_DIR,0); count_direction[Z_AXIS] = -1; - if (check_endstops) { - #if defined(Z_MIN_PIN) && Z_MIN_PIN >= 0 - UPDATE_ENDSTOP(z, Z, min, MIN); + if (check_endstops) + { + #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1 + #ifndef Z_DUAL_ENDSTOPS + UPDATE_ENDSTOP(z, Z, min, MIN); + #else + bool z_min_endstop=(READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING); + #if defined(Z2_MIN_PIN) && Z2_MIN_PIN > -1 + bool z2_min_endstop=(READ(Z2_MIN_PIN) != Z2_MIN_ENDSTOP_INVERTING); + #else + bool z2_min_endstop=z_min_endstop; + #endif + if(((z_min_endstop && old_z_min_endstop) || (z2_min_endstop && old_z2_min_endstop)) && (current_block->steps[Z_AXIS] > 0)) + { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_hit=true; + if (!(performing_homing) || ((performing_homing)&&(z_min_endstop && old_z_min_endstop)&&(z2_min_endstop && old_z2_min_endstop))) //if not performing home or if both endstops were trigged during homing... + { + step_events_completed = current_block->step_event_count; + } + } + old_z_min_endstop = z_min_endstop; + old_z2_min_endstop = z2_min_endstop; + #endif #endif } } else { // +direction - Z_DIR_WRITE(!INVERT_Z_DIR); - #ifdef Z_DUAL_STEPPER_DRIVERS - Z2_DIR_WRITE(!INVERT_Z_DIR); - #endif - + Z_APPLY_DIR(!INVERT_Z_DIR,0); count_direction[Z_AXIS] = 1; if (check_endstops) { #if defined(Z_MAX_PIN) && Z_MAX_PIN >= 0 - UPDATE_ENDSTOP(z, Z, max, MAX); + #ifndef Z_DUAL_ENDSTOPS + UPDATE_ENDSTOP(z, Z, max, MAX); + #else + bool z_max_endstop=(READ(Z_MAX_PIN) != Z_MAX_ENDSTOP_INVERTING); + #if defined(Z2_MAX_PIN) && Z2_MAX_PIN > -1 + bool z2_max_endstop=(READ(Z2_MAX_PIN) != Z2_MAX_ENDSTOP_INVERTING); + #else + bool z2_max_endstop=z_max_endstop; + #endif + if(((z_max_endstop && old_z_max_endstop) || (z2_max_endstop && old_z2_max_endstop)) && (current_block->steps[Z_AXIS] > 0)) + { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_hit=true; + +// if (z_max_endstop && old_z_max_endstop) SERIAL_ECHOLN("z_max_endstop = true"); +// if (z2_max_endstop && old_z2_max_endstop) SERIAL_ECHOLN("z2_max_endstop = true"); + + + if (!(performing_homing) || ((performing_homing)&&(z_max_endstop && old_z_max_endstop)&&(z2_max_endstop && old_z2_max_endstop))) //if not performing home or if both endstops were trigged during homing... + { + step_events_completed = current_block->step_event_count; + } + } + old_z_max_endstop = z_max_endstop; + old_z2_max_endstop = z2_max_endstop; + #endif #endif } } @@ -845,6 +911,13 @@ void st_init() { #endif #endif + #if defined(Z2_MAX_PIN) && Z2_MAX_PIN >= 0 + SET_INPUT(Z2_MAX_PIN); + #ifdef ENDSTOPPULLUP_ZMAX + WRITE(Z2_MAX_PIN,HIGH); + #endif + #endif + #define AXIS_INIT(axis, AXIS, PIN) \ AXIS ##_STEP_INIT; \ AXIS ##_STEP_WRITE(INVERT_## PIN ##_STEP_PIN); \ @@ -1174,3 +1247,9 @@ void microstep_readings() { SERIAL_PROTOCOLLN(digitalRead(E1_MS2_PIN)); #endif } + +#ifdef Z_DUAL_ENDSTOPS + void In_Homing_Process(bool state) { performing_homing = state; } + void Lock_z_motor(bool state) { locked_z_motor = state; } + void Lock_z2_motor(bool state) { locked_z2_motor = state; } +#endif diff --git a/Marlin/stepper.h b/Marlin/stepper.h index a1f2916090..d6c17d60f6 100644 --- a/Marlin/stepper.h +++ b/Marlin/stepper.h @@ -97,6 +97,12 @@ void digipot_current(uint8_t driver, int current); void microstep_init(); void microstep_readings(); +#ifdef Z_DUAL_ENDSTOPS + void In_Homing_Process(bool state); + void Lock_z_motor(bool state); + void Lock_z2_motor(bool state); +#endif + #ifdef BABYSTEPPING void babystep(const uint8_t axis,const bool direction); // perform a short step with a single stepper motor, outside of any convention #endif From c2ba5d0c094000617f37e57552090399eee64459 Mon Sep 17 00:00:00 2001 From: alexborro Date: Tue, 24 Mar 2015 15:50:31 -0300 Subject: [PATCH 18/18] Fix ZigZag and Topograph table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ZigZag: Inverted Behavior.. If T supplied, it does not zigzag. Topograph table: The table was rotated 90º clockwise. --- Marlin/Marlin_main.cpp | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 3316862add..b3235f5595 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -2274,13 +2274,11 @@ inline void gcode_G28() { xStart = 0; xStop = auto_bed_leveling_grid_points; xInc = 1; - zig = false; } else { xStart = auto_bed_leveling_grid_points - 1; xStop = -1; xInc = -1; - zig = true; } #ifndef DELTA @@ -2367,7 +2365,7 @@ inline void gcode_G28() { SERIAL_PROTOCOLPGM("+-----------+\n"); for (int yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) { - for (int xx = auto_bed_leveling_grid_points - 1; xx >= 0; xx--) { + for (int xx = 0; xx < auto_bed_leveling_grid_points; xx++) { int ind = yy * auto_bed_leveling_grid_points + xx; float diff = eqnBVector[ind] - mean; if (diff >= 0.0)