zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Multi-line comments cleanup (#19535)

Browse source
This commit is contained in:
qwewer0 2020-09-28 21:53:50 +02:00 committed by Scott Lahteine
parent 3453d2d17a
commit 04a712dacc
131 changed files with 11 additions and 176 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Marlin/Configuration.h
View file

@ -34,7 +34,6 @@
* - Extra features * - Extra features
* *
* Advanced settings can be found in Configuration_adv.h * Advanced settings can be found in Configuration_adv.h
*
*/ */
#define CONFIGURATION_H_VERSION 020007 #define CONFIGURATION_H_VERSION 020007
@ -855,7 +854,6 @@
* - For simple switches connect... * - For simple switches connect...
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
*
*/ */
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1567,7 +1565,6 @@
* *
* Caveats: The ending Z should be the same as starting Z. * Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
*
*/ */
//#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
@ -1720,7 +1717,6 @@
* *
* SD Card support is disabled by default. If your controller has an SD slot, * SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work. * you must uncomment the following option or it won't work.
*
*/ */
//#define SDSUPPORT //#define SDSUPPORT
@ -2343,7 +2339,6 @@
* *** CAUTION *** * *** CAUTION ***
* *
* LED Type. Enable only one of the following two options. * LED Type. Enable only one of the following two options.
*
*/ */
//#define RGB_LED //#define RGB_LED
//#define RGBW_LED //#define RGBW_LED

3
Marlin/Configuration_adv.h
View file

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set! * Some of these settings can damage your printer if improperly set!
* *
* Basic settings can be found in Configuration.h * Basic settings can be found in Configuration.h
*
*/ */
#define CONFIGURATION_ADV_H_VERSION 020007 #define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 | * | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | | * | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 | * | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/ */
#ifndef Z_STEPPER_ALIGN_XY #ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0 //#define Z_STEPPERS_ORIENTATION 0
@ -1954,7 +1952,6 @@
* Be sure to turn off auto-retract during filament change. * Be sure to turn off auto-retract during filament change.
* *
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/ */
//#define FWRETRACT //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)

1
Marlin/src/HAL/AVR/HAL.h
View file

@ -15,6 +15,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/AVR/Servo.cpp
View file

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds. * readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached. * attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin. * detach() - Stop an attached servo from pulsing its i/o pin.
*
*/ */
#ifdef __AVR__ #ifdef __AVR__

1
Marlin/src/HAL/AVR/timers.h
View file

@ -15,6 +15,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/DUE/HAL_SPI.cpp
View file

@ -759,7 +759,6 @@
* *
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the * All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI. * display to use software SPI.
*
*/ */
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified) void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)

1
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
View file

@ -52,7 +52,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/ */
#ifdef __SAM3X8E__ #ifdef __SAM3X8E__

1
Marlin/src/HAL/DUE/eeprom_flash.cpp
View file

@ -53,7 +53,6 @@
* per page. We can't emulate EE endurance with FLASH for all * per page. We can't emulate EE endurance with FLASH for all
* bytes, but we can emulate endurance for a given percent of * bytes, but we can emulate endurance for a given percent of
* bytes. * bytes.
*
*/ */
//#define EE_EMU_DEBUG //#define EE_EMU_DEBUG

1
Marlin/src/HAL/DUE/pinsDebug.h
View file

@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
* ----------------+-------- * ----------------+--------
* ID | PB11 * ID | PB11
* VBOF | PB10 * VBOF | PB10
*
*/ */

1
Marlin/src/HAL/ESP32/HAL.h
View file

@ -15,6 +15,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/ESP32/ota.h
View file

@ -15,6 +15,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/LINUX/include/serial.h
View file

@ -33,7 +33,6 @@
* Generic RingBuffer * Generic RingBuffer
* T type of the buffer array * T type of the buffer array
* S size of the buffer (must be power of 2) * S size of the buffer (must be power of 2)
*
*/ */
template <typename T, uint32_t S> class RingBuffer { template <typename T, uint32_t S> class RingBuffer {
public: public:

1
Marlin/src/HAL/LINUX/servo_private.h
View file

@ -45,7 +45,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. * Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
* *
* The only modification was to update/delete macros to match the LPC176x. * The only modification was to update/delete macros to match the LPC176x.
*
*/ */
#include <stdint.h> #include <stdint.h>

1
Marlin/src/HAL/LPC1768/Servo.h
View file

@ -46,7 +46,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. * Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
* *
* The only modification was to update/delete macros to match the LPC176x. * The only modification was to update/delete macros to match the LPC176x.
*
*/ */
#include <Servo.h> #include <Servo.h>

1
Marlin/src/HAL/LPC1768/timers.h
View file

@ -21,7 +21,6 @@
#pragma once #pragma once
/** /**
*
* HAL For LPC1768 * HAL For LPC1768
*/ */

1
Marlin/src/HAL/SAMD51/QSPIFlash.h
View file

@ -24,7 +24,6 @@
* THE SOFTWARE. * THE SOFTWARE.
* *
* Derived from Adafruit_SPIFlash class with no SdFat references * Derived from Adafruit_SPIFlash class with no SdFat references
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/SAMD51/pinsDebug.h
View file

@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
* 93 | PA10 | QSPI: IO2 * 93 | PA10 | QSPI: IO2
* 94 | PA11 | QSPI: IO3 * 94 | PA11 | QSPI: IO3
* 95 | PB31 | SD: DETECT * 95 | PB31 | SD: DETECT
*
*/ */

1
Marlin/src/HAL/STM32F1/onboard_sd.cpp
View file

@ -9,7 +9,6 @@
* No restriction on use. You can use, modify and redistribute it for * No restriction on use. You can use, modify and redistribute it for
* personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY. * personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
* Redistributions of source code must retain the above copyright notice. * Redistributions of source code must retain the above copyright notice.
*
*/ */
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"

2
Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp
View file

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE. * THE SOFTWARE.
*
*/ */
#if defined(STM32GENERIC) && defined(STM32F7) #if defined(STM32GENERIC) && defined(STM32F7)
@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
/** /**
* reads a value from the TMC26X status register. The value is not obtained directly but can then * reads a value from the TMC26X status register. The value is not obtained directly but can then
* be read by the various status routines. * be read by the various status routines.
*
*/ */
void TMC26XStepper::readStatus(char read_value) { void TMC26XStepper::readStatus(char read_value) {
uint32_t old_driver_configuration_register_value = driver_configuration_register_value; uint32_t old_driver_configuration_register_value = driver_configuration_register_value;

1
Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h
View file

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE. * THE SOFTWARE.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/TEENSY35_36/timers.h
View file

@ -16,6 +16,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/TEENSY40_41/timers.h
View file

@ -16,6 +16,7 @@
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/ */
#pragma once #pragma once

1
Marlin/src/HAL/shared/servo.cpp
View file

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds. * readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached. * attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin. * detach() - Stop an attached servo from pulsing its i/o pin.
*
*/ */
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"

1
Marlin/src/HAL/shared/servo.h
View file

@ -41,7 +41,6 @@
*/ */
/** /**
*
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method * The servos are pulsed in the background using the value most recently written using the write() method
* *

1
Marlin/src/core/language.h
View file

@ -348,7 +348,6 @@
* However, internal to Marlin E0/T0 is the first tool, and * However, internal to Marlin E0/T0 is the first tool, and
* most board silkscreens say "E0." Zero-based labels will * most board silkscreens say "E0." Zero-based labels will
* make these indexes consistent but this defies expectation. * make these indexes consistent but this defies expectation.
*
*/ */
#if ENABLED(NUMBER_TOOLS_FROM_0) #if ENABLED(NUMBER_TOOLS_FROM_0)
#define LCD_FIRST_TOOL 0 #define LCD_FIRST_TOOL 0

2
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
View file

@ -236,9 +236,7 @@
} }
/** /**
*
* Generic case of a line crossing both X and Y Mesh lines. * Generic case of a line crossing both X and Y Mesh lines.
*
*/ */
xy_int8_t cnt = (istart - iend).ABS(); xy_int8_t cnt = (istart - iend).ABS();

4
Marlin/src/feature/encoder_i2c.cpp
View file

@ -816,7 +816,6 @@ int8_t I2CPositionEncodersMgr::parse() {
* Y Report on Y axis encoder, if present. * Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present. * Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present. * E Report on E axis encoder, if present.
*
*/ */
void I2CPositionEncodersMgr::M860() { void I2CPositionEncodersMgr::M860() {
if (parse()) return; if (parse()) return;
@ -846,7 +845,6 @@ void I2CPositionEncodersMgr::M860() {
* Y Report on Y axis encoder, if present. * Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present. * Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present. * E Report on E axis encoder, if present.
*
*/ */
void I2CPositionEncodersMgr::M861() { void I2CPositionEncodersMgr::M861() {
if (parse()) return; if (parse()) return;
@ -875,7 +873,6 @@ void I2CPositionEncodersMgr::M861() {
* Y Report on Y axis encoder, if present. * Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present. * Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present. * E Report on E axis encoder, if present.
*
*/ */
void I2CPositionEncodersMgr::M862() { void I2CPositionEncodersMgr::M862() {
if (parse()) return; if (parse()) return;
@ -905,7 +902,6 @@ void I2CPositionEncodersMgr::M862() {
* Y Report on Y axis encoder, if present. * Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present. * Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present. * E Report on E axis encoder, if present.
*
*/ */
void I2CPositionEncodersMgr::M863() { void I2CPositionEncodersMgr::M863() {
if (parse()) return; if (parse()) return;

4
Marlin/src/feature/mmu2/mmu2.cpp
View file

@ -710,13 +710,11 @@ void MMU2::tool_change(const uint8_t index) {
} }
/** /**
*
* Handle special T?/Tx/Tc commands * Handle special T?/Tx/Tc commands
* *
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically * T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load. * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
*
*/ */
void MMU2::tool_change(const char* special) { void MMU2::tool_change(const char* special) {
if (!enabled) return; if (!enabled) return;
@ -922,9 +920,7 @@ void MMU2::filament_runout() {
} }
/** /**
*
* Switch material and load to nozzle * Switch material and load to nozzle
*
*/ */
bool MMU2::load_filament_to_nozzle(const uint8_t index) { bool MMU2::load_filament_to_nozzle(const uint8_t index) {

1
Marlin/src/feature/twibus.h
View file

@ -48,7 +48,6 @@ typedef void (*twiRequestFunc_t)();
* For more information see * For more information see
* - https://marlinfw.org/docs/gcode/M260.html * - https://marlinfw.org/docs/gcode/M260.html
* - https://marlinfw.org/docs/gcode/M261.html * - https://marlinfw.org/docs/gcode/M261.html
*
*/ */
class TWIBus { class TWIBus {
private: private:

1
Marlin/src/gcode/bedlevel/abl/G29.cpp
View file

@ -160,7 +160,6 @@
* E By default G29 will engage the Z probe, test the bed, then disengage. * E By default G29 will engage the Z probe, test the bed, then disengage.
* Include "E" to engage/disengage the Z probe for each sample. * Include "E" to engage/disengage the Z probe for each sample.
* There's no extra effect if you have a fixed Z probe. * There's no extra effect if you have a fixed Z probe.
*
*/ */
G29_TYPE GcodeSuite::G29() { G29_TYPE GcodeSuite::G29() {

1
Marlin/src/gcode/bedlevel/mbl/G29.cpp
View file

@ -57,7 +57,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM("
* S3 In Jn Zn.nn Manually modify a single point * S3 In Jn Zn.nn Manually modify a single point
* S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed. * S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed.
* S5 Reset and disable mesh * S5 Reset and disable mesh
*
*/ */
void GcodeSuite::G29() { void GcodeSuite::G29() {

1
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -192,7 +192,6 @@
* X Home to the X endstop * X Home to the X endstop
* Y Home to the Y endstop * Y Home to the Y endstop
* Z Home to the Z endstop * Z Home to the Z endstop
*
*/ */
void GcodeSuite::G28() { void GcodeSuite::G28() {
DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING)); DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING));

1
Marlin/src/gcode/control/M999.cpp
View file

@ -34,7 +34,6 @@
* *
* Sending "M999 S1" will resume printing without flushing the * Sending "M999 S1" will resume printing without flushing the
* existing command buffer. * existing command buffer.
*
*/ */
void GcodeSuite::M999() { void GcodeSuite::M999() {
marlin_state = MF_RUNNING; marlin_state = MF_RUNNING;

2
Marlin/src/gcode/feature/L6470/M906.cpp
View file

@ -33,7 +33,6 @@
#include "../../../core/debug_out.h" #include "../../../core/debug_out.h"
/** /**
*
* M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the * M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
* PWMs to the steppers * PWMs to the steppers
* *
@ -56,7 +55,6 @@
* *
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx * L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper. * that affects the effective voltage seen by the stepper.
*
*/ */
/** /**

6
Marlin/src/gcode/feature/L6470/M916-918.cpp
View file

@ -37,7 +37,6 @@
#include "../../../core/debug_out.h" #include "../../../core/debug_out.h"
/** /**
*
* M916: increase KVAL_HOLD until get thermal warning * M916: increase KVAL_HOLD until get thermal warning
* NOTE - on L6474 it is TVAL that is used * NOTE - on L6474 it is TVAL that is used
* *
@ -62,7 +61,6 @@
* *
* D - time (in seconds) to run each setting of KVAL_HOLD/TVAL * D - time (in seconds) to run each setting of KVAL_HOLD/TVAL
* optional - defaults to zero (runs each setting once) * optional - defaults to zero (runs each setting once)
*
*/ */
/** /**
@ -187,7 +185,6 @@ void GcodeSuite::M916() {
} }
/** /**
*
* M917: Find minimum current thresholds * M917: Find minimum current thresholds
* *
* Decrease OCD current until overcurrent error * Decrease OCD current until overcurrent error
@ -214,7 +211,6 @@ void GcodeSuite::M916() {
* *
* K - value for KVAL_HOLD (0 - 255) (ignored for L6474) * K - value for KVAL_HOLD (0 - 255) (ignored for L6474)
* optional - will report current value from driver if not specified * optional - will report current value from driver if not specified
*
*/ */
void GcodeSuite::M917() { void GcodeSuite::M917() {
@ -522,7 +518,6 @@ void GcodeSuite::M917() {
} }
/** /**
*
* M918: increase speed until error or max feedrate achieved (as shown in configuration.h)) * M918: increase speed until error or max feedrate achieved (as shown in configuration.h))
* *
* J - select which driver(s) to monitor on multi-driver axis * J - select which driver(s) to monitor on multi-driver axis
@ -543,7 +538,6 @@ void GcodeSuite::M917() {
* *
* M - value for microsteps (1 - 128) (optional) * M - value for microsteps (1 - 128) (optional)
* optional - will report current value from driver if not specified * optional - will report current value from driver if not specified
*
*/ */
void GcodeSuite::M918() { void GcodeSuite::M918() {

1
Marlin/src/gcode/feature/i2c/M260_M261.cpp
View file

@ -42,7 +42,6 @@
* *
* M260 S1 ; Send the buffered data and reset the buffer * M260 S1 ; Send the buffered data and reset the buffer
* M260 R1 ; Reset the buffer without sending data * M260 R1 ; Reset the buffer without sending data
*
*/ */
void GcodeSuite::M260() { void GcodeSuite::M260() {
// Set the target address // Set the target address

1
Marlin/src/gcode/feature/pause/M603.cpp
View file

@ -39,7 +39,6 @@
* T[toolhead] - Select extruder to configure, active extruder if not specified * T[toolhead] - Select extruder to configure, active extruder if not specified
* U[distance] - Retract distance for removal, for the specified extruder * U[distance] - Retract distance for removal, for the specified extruder
* L[distance] - Extrude distance for insertion, for the specified extruder * L[distance] - Extrude distance for insertion, for the specified extruder
*
*/ */
void GcodeSuite::M603() { void GcodeSuite::M603() {

1
Marlin/src/gcode/gcode.h
View file

@ -289,7 +289,6 @@
* "T" Codes * "T" Codes
* *
* T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>" * T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
*
*/ */
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"

1
Marlin/src/gcode/sd/M32.cpp
View file

@ -38,7 +38,6 @@
* M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO * M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO
* M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure * M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure
* M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60 * M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60
*
*/ */
void GcodeSuite::M32() { void GcodeSuite::M32() {
if (IS_SD_PRINTING()) planner.synchronize(); if (IS_SD_PRINTING()) planner.synchronize();

1
Marlin/src/inc/Conditionals_LCD.h
View file

@ -512,7 +512,6 @@
* HOTENDS - Number of hotends, whether connected or separate * HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors * E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options * E_MANUAL - Number of E steppers for LCD move options
*
*/ */
#if EXTRUDERS == 0 #if EXTRUDERS == 0

1
Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
View file

@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY; * any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS * without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
*
*/ */
/** /**

1
Marlin/src/lcd/dogm/status_screen_lite_ST7920.h
View file

@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY; * any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS * without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
*
*/ */
#pragma once #pragma once

1
Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
View file

@ -51,7 +51,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/ */
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"

1
Marlin/src/lcd/dwin/e3v2/dwin.cpp
View file

@ -1632,7 +1632,6 @@ void update_variable() {
* TODO: New code can follow the pattern of menu_media.cpp * TODO: New code can follow the pattern of menu_media.cpp
* and rely on Marlin caching for performance. No need to * and rely on Marlin caching for performance. No need to
* cache files here. * cache files here.
*
*/ */
#ifndef strcasecmp_P #ifndef strcasecmp_P

1
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
View file

@ -42,7 +42,6 @@ constexpr uint32_t flash_eeprom_version = 1;
* 0 16 DATA STORAGE AREA * 0 16 DATA STORAGE AREA
* 16 1 VERSIONING DATA * 16 1 VERSIONING DATA
* 17 inf MEDIA STORAGE AREA * 17 inf MEDIA STORAGE AREA
*
*/ */
#define DATA_STORAGE_SIZE_64K #define DATA_STORAGE_SIZE_64K

1
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
View file

@ -32,7 +32,6 @@
* Selecting an LCD Display * Selecting an LCD Display
* Version 2.1 * Version 2.1
* Issue Date: 2017-11-14 * Issue Date: 2017-11-14
*
*/ */
#define COMPUTE_REGS_FROM_DATASHEET \ #define COMPUTE_REGS_FROM_DATASHEET \
constexpr uint16_t Hoffset = thfp + thb - 1; \ constexpr uint16_t Hoffset = thfp + thb - 1; \

1
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
View file

@ -109,7 +109,6 @@ namespace FTDI {
* - Handles auto-repetition by sending onTouchHeld to the active screen periodically. * - Handles auto-repetition by sending onTouchHeld to the active screen periodically.
* - Plays touch feedback "click" sounds when appropriate. * - Plays touch feedback "click" sounds when appropriate.
* - Performs debouncing to supress spurious touch events. * - Performs debouncing to supress spurious touch events.
*
*/ */
void EventLoop::process_events() { void EventLoop::process_events() {
// If the LCD is processing commands, don't check // If the LCD is processing commands, don't check

1
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
View file

@ -49,7 +49,6 @@
* ... * ...
* } * }
* } * }
*
*/ */
class PolyReader { class PolyReader {

1
Marlin/src/lcd/extui/ui_api.h
View file

@ -375,7 +375,6 @@ namespace ExtUI {
* constexpr float increment = 10; * constexpr float increment = 10;
* *
* UI_INCREMENT(TargetTemp_celsius, E0) * UI_INCREMENT(TargetTemp_celsius, E0)
*
*/ */
#define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__) #define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__)
#define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__) #define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__)

1
Marlin/src/lcd/language/language_an.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_bg.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_5 #define DISPLAY_CHARSET_ISO10646_5

1
Marlin/src/lcd/language/language_ca.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_ca { namespace Language_ca {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

1
Marlin/src/lcd/language/language_cz.h
View file

@ -31,7 +31,6 @@
* Translated by Petr Zahradnik, Computer Laboratory * Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi * Blog and video blog Zahradnik se bavi
* https://www.zahradniksebavi.cz * https://www.zahradniksebavi.cz
*
*/ */
#define DISPLAY_CHARSET_ISO10646_CZ #define DISPLAY_CHARSET_ISO10646_CZ

1
Marlin/src/lcd/language/language_da.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_de.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_de { namespace Language_de {

1
Marlin/src/lcd/language/language_el.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_GREEK #define DISPLAY_CHARSET_ISO10646_GREEK

1
Marlin/src/lcd/language/language_el_gr.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_GREEK #define DISPLAY_CHARSET_ISO10646_GREEK

1
Marlin/src/lcd/language/language_en.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define en 1234 #define en 1234

1
Marlin/src/lcd/language/language_es.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_es { namespace Language_es {

1
Marlin/src/lcd/language/language_eu.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_fi.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_fr.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_gl.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_hr.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.

1
Marlin/src/lcd/language/language_hu.h
View file

@ -29,7 +29,6 @@
* A Magyar fordítást készítette: AntoszHUN * A Magyar fordítást készítette: AntoszHUN
* *
* *
*
*/ */
namespace Language_hu { namespace Language_hu {

1
Marlin/src/lcd/language/language_it.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_jp_kana.h
View file

@ -27,7 +27,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
//#define DISPLAY_CHARSET_ISO10646_KANA //#define DISPLAY_CHARSET_ISO10646_KANA

1
Marlin/src/lcd/language/language_ko_KR.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_ko_KR { namespace Language_ko_KR {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

1
Marlin/src/lcd/language/language_nl.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_pl.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_PL #define DISPLAY_CHARSET_ISO10646_PL

1
Marlin/src/lcd/language/language_pt.h
View file

@ -27,7 +27,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_1 #define DISPLAY_CHARSET_ISO10646_1

1
Marlin/src/lcd/language/language_pt_br.h
View file

@ -27,7 +27,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_pt_br { namespace Language_pt_br {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

1
Marlin/src/lcd/language/language_ru.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_5 #define DISPLAY_CHARSET_ISO10646_5

1
Marlin/src/lcd/language/language_sk.h
View file

@ -30,7 +30,6 @@
* *
* Translated by Michal Holeš, Farma MaM * Translated by Michal Holeš, Farma MaM
* https://www.facebook.com/farmamam * https://www.facebook.com/farmamam
*
*/ */
#define DISPLAY_CHARSET_ISO10646_SK #define DISPLAY_CHARSET_ISO10646_SK

1
Marlin/src/lcd/language/language_test.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
// Select ONE of the following Mappers. // Select ONE of the following Mappers.

1
Marlin/src/lcd/language/language_tr.h
View file

@ -30,7 +30,6 @@
* Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim; * Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim;
* Contact for issues and corrections in this translation file; * Contact for issues and corrections in this translation file;
* Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/ * Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/
*
*/ */
#define DISPLAY_CHARSET_ISO10646_TR #define DISPLAY_CHARSET_ISO10646_TR

1
Marlin/src/lcd/language/language_uk.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
#define DISPLAY_CHARSET_ISO10646_5 #define DISPLAY_CHARSET_ISO10646_5

1
Marlin/src/lcd/language/language_vi.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_vi { namespace Language_vi {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

1
Marlin/src/lcd/language/language_zh_CN.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_zh_CN { namespace Language_zh_CN {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

1
Marlin/src/lcd/language/language_zh_TW.h
View file

@ -26,7 +26,6 @@
* *
* LCD Menu Messages * LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html * See also https://marlinfw.org/docs/development/lcd_language.html
*
*/ */
namespace Language_zh_TW { namespace Language_zh_TW {
using namespace Language_en; // Inherit undefined strings from English using namespace Language_en; // Inherit undefined strings from English

2
Marlin/src/lcd/menu/menu_filament.cpp
View file

@ -101,9 +101,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
} }
/** /**
*
* "Change Filament" submenu * "Change Filament" submenu
*
*/ */
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)

1
Marlin/src/libs/least_squares_fit.cpp
View file

@ -29,7 +29,6 @@
* it saves roughly 10K of program memory. It also does not require all of * it saves roughly 10K of program memory. It also does not require all of
* coordinates to be present during the calculations. Each point can be * coordinates to be present during the calculations. Each point can be
* probed and then discarded. * probed and then discarded.
*
*/ */
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"

1
Marlin/src/libs/least_squares_fit.h
View file

@ -30,7 +30,6 @@
* it saves roughly 10K of program memory. And even better... the data * it saves roughly 10K of program memory. And even better... the data
* fed into the algorithm does not need to all be present at the same time. * fed into the algorithm does not need to all be present at the same time.
* A point can be probed and its values fed into the algorithm and then discarded. * A point can be probed and its values fed into the algorithm and then discarded.
*
*/ */
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"

2
Marlin/src/module/planner.cpp
View file

@ -339,7 +339,6 @@ void Planner::init() {
* const uint32_t r = _BV(24) - x * d; // Estimate remainder * const uint32_t r = _BV(24) - x * d; // Estimate remainder
* if (r >= d) x++; // Check whether to adjust result * if (r >= d) x++; // Check whether to adjust result
* return uint32_t(x); // x holds the proper estimation * return uint32_t(x); // x holds the proper estimation
*
*/ */
static uint32_t get_period_inverse(uint32_t d) { static uint32_t get_period_inverse(uint32_t d) {
@ -2243,7 +2242,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e) #define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e)
/** /**
*
* Use LIN_ADVANCE for blocks if all these are true: * Use LIN_ADVANCE for blocks if all these are true:
* *
* esteps : This is a print move, because we checked for A, B, C steps before. * esteps : This is a print move, because we checked for A, B, C steps before.

1
Marlin/src/module/planner_bezier.cpp
View file

@ -24,7 +24,6 @@
* planner_bezier.cpp * planner_bezier.cpp
* *
* Compute and buffer movement commands for bezier curves * Compute and buffer movement commands for bezier curves
*
*/ */
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"

1
Marlin/src/module/planner_bezier.h
View file

@ -25,7 +25,6 @@
* planner_bezier.h * planner_bezier.h
* *
* Compute and buffer movement commands for Bézier curves * Compute and buffer movement commands for Bézier curves
*
*/ */
#include "../core/types.h" #include "../core/types.h"

1
Marlin/src/module/probe.cpp
View file

@ -729,7 +729,6 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise
* when starting up the machine or rebooting the board. * when starting up the machine or rebooting the board.
* There's no way to know where the nozzle is positioned until * There's no way to know where the nozzle is positioned until
* homing has been done - no homing with z-probe without init! * homing has been done - no homing with z-probe without init!
*
*/ */
STOW_Z_SERVO(); STOW_Z_SERVO();
} }

1
Marlin/src/module/settings.cpp
View file

@ -33,7 +33,6 @@
* ALSO: Variables in the Store and Retrieve sections must be in the same order. * ALSO: Variables in the Store and Retrieve sections must be in the same order.
* If a feature is disabled, some data must still be written that, when read, * If a feature is disabled, some data must still be written that, when read,
* either sets a Sane Default, or results in No Change to the existing value. * either sets a Sane Default, or results in No Change to the existing value.
*
*/ */
// Change EEPROM version if the structure changes // Change EEPROM version if the structure changes

1
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View file

@ -27,7 +27,6 @@
* Applies to the following boards: * Applies to the following boards:
* *
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
*
*/ */
#if NOT_TARGET(MCU_LPC1768) #if NOT_TARGET(MCU_LPC1768)

1
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View file

@ -27,7 +27,6 @@
* Applies to the following boards: * Applies to the following boards:
* *
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
*
*/ */
#if NOT_TARGET(MCU_LPC1768) #if NOT_TARGET(MCU_LPC1768)

2
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View file

@ -372,7 +372,6 @@
* P1_31 - not 5V tolerant - EXP1 * P1_31 - not 5V tolerant - EXP1
* P0_27 - open collector - EXP2 * P0_27 - open collector - EXP2
* P0_28 - open collector - EXP2 * P0_28 - open collector - EXP2
*
*/ */
/** /**
@ -387,5 +386,4 @@
* P0_03 - AUX1 * P0_03 - AUX1
* P0_29 - Port -1 * P0_29 - Port -1
* P0_30 - USB * P0_30 - USB
*
*/ */

1
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file

@ -31,7 +31,6 @@
* RAMPS_14_EFF (Hotend, Fan0, Fan1) * RAMPS_14_EFF (Hotend, Fan0, Fan1)
* RAMPS_14_EEF (Hotend0, Hotend1, Fan) * RAMPS_14_EEF (Hotend0, Hotend1, Fan)
* RAMPS_14_SF (Spindle, Controller Fan) * RAMPS_14_SF (Spindle, Controller Fan)
*
*/ */
// Numbers in parentheses () are the corresponding mega2560 pin numbers // Numbers in parentheses () are the corresponding mega2560 pin numbers

2
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
View file

@ -16,7 +16,7 @@
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
* *
*/ */
#pragma once #pragma once

1
Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
View file

@ -26,7 +26,6 @@
* *
* The pins diagram can be found and the following URL: * The pins diagram can be found and the following URL:
* https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf * https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf
*
*/ */
#if NOT_TARGET(MCU_LPC1769) #if NOT_TARGET(MCU_LPC1769)

1
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
View file

@ -166,7 +166,6 @@
* *
* A remote SD card is currently not supported because the pins routed to the EXP2 * A remote SD card is currently not supported because the pins routed to the EXP2
* connector are shared with the onboard SD card. * connector are shared with the onboard SD card.
*
*/ */
#if ENABLED(CR10_STOCKDISPLAY) #if ENABLED(CR10_STOCKDISPLAY)

1
Marlin/src/pins/mega/pins_INTAMSYS40.h
View file

@ -137,7 +137,6 @@
///////////////////// SPARE HEADERS ////////////// ///////////////////// SPARE HEADERS //////////////
/** /**
*
* J25 * J25
* 1 D54 * 1 D54
* 2 D55 * 2 D55

1
Marlin/src/pins/mega/pins_MINITRONICS.h
View file

@ -29,7 +29,6 @@
* Rev B 2 JAN 2017 * Rev B 2 JAN 2017
* *
* Added pin definitions for M3, M4 & M5 spindle control commands * Added pin definitions for M3, M4 & M5 spindle control commands
*
*/ */
#if NOT_TARGET(__AVR_ATmega1281__) #if NOT_TARGET(__AVR_ATmega1281__)

1
Marlin/src/pins/pinsDebug.h
View file

@ -31,7 +31,6 @@
* *
* Both passes use the same pin list. The list contains two macro names. The * Both passes use the same pin list. The list contains two macro names. The
* actual macro definitions are changed depending on which pass is being done. * actual macro definitions are changed depending on which pass is being done.
*
*/ */
// first pass - put the name strings into FLASH // first pass - put the name strings into FLASH

1
Marlin/src/pins/ramps/pins_RAMPS_13.h
View file

@ -31,7 +31,6 @@
* RAMPS_13_EFF (Extruder, Fan, Fan) * RAMPS_13_EFF (Extruder, Fan, Fan)
* RAMPS_13_EEF (Extruder, Extruder, Fan) * RAMPS_13_EEF (Extruder, Extruder, Fan)
* RAMPS_13_SF (Spindle, Controller Fan) * RAMPS_13_SF (Spindle, Controller Fan)
*
*/ */
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

1
Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
View file

@ -35,7 +35,6 @@
* RAMPS_PLUS_EFF (Extruder, Fan, Fan) * RAMPS_PLUS_EFF (Extruder, Fan, Fan)
* RAMPS_PLUS_EEF (Extruder, Extruder, Fan) * RAMPS_PLUS_EEF (Extruder, Extruder, Fan)
* RAMPS_PLUS_SF (Spindle, Controller Fan) * RAMPS_PLUS_SF (Spindle, Controller Fan)
*
*/ */
#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) #if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)

Some files were not shown because too many files have changed in this diff Show more