UltiMachine Archim 1 support (#12404)
This commit is contained in:
Ryan
Scott Lahteine
parent
664e20754d
commit
052d102ded
|
|
@ -404,8 +404,14 @@ else ifeq ($(HARDWARE_MOTHERBOARD),88)
|
|||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
|
||||
# UltiMachine Archim1 (with DRV8825 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1591)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
IS_MCU = 0
|
||||
# UltiMachine Archim2 (with TMC2130 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1590)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1592)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
|
|
|
|||
|
|
@ -49,6 +49,7 @@
|
|||
|
||||
#undef UNUSED /* To avoid a macro clash as macros.h already defines it */
|
||||
#include "../../../core/macros.h" /* For ENABLED()/DISABLED() */
|
||||
#include "../../../core/boards.h" /* For MB() */
|
||||
#include "../../../../Configuration.h" /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
|
||||
#include "compiler.h"
|
||||
|
||||
|
|
@ -88,7 +89,11 @@
|
|||
//#define USB_DEVICE_LOW_SPEED
|
||||
|
||||
//! To define a Full speed device
|
||||
//#define USB_DEVICE_FULL_SPEED
|
||||
//#define USB_DEVICE_FULL_SPEED
|
||||
|
||||
#if MB(ARCHIM1)
|
||||
#define USB_DEVICE_FULL_SPEED
|
||||
#endif
|
||||
|
||||
//! To authorize the High speed
|
||||
#ifndef USB_DEVICE_FULL_SPEED
|
||||
|
|
|
|||
2019
Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
Normal file
2019
Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
Normal file
File diff suppressed because it is too large
Load diff
1886
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
Normal file
1886
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
Normal file
File diff suppressed because it is too large
Load diff
|
|
@ -209,7 +209,8 @@
|
|||
#define BOARD_RURAMPS4D_11 1550 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_RURAMPS4D_13 1551 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_ULTRATRONICS_PRO 1560 // ReprapWorld Ultratronics Pro V1.0
|
||||
#define BOARD_ARCHIM2 1590 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ARCHIM1 1591 // UltiMachine Archim1 (with DRV8825 drivers)
|
||||
#define BOARD_ARCHIM2 1592 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 1602 // Alligator Board R2
|
||||
|
||||
//
|
||||
|
|
|
|||
|
|
@ -2407,13 +2407,13 @@ void Stepper::report_positions() {
|
|||
void Stepper::refresh_motor_power() {
|
||||
LOOP_L_N(i, COUNT(motor_current_setting)) {
|
||||
switch (i) {
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
|
||||
case 0:
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
|
||||
case 1:
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) || PIN_EXISTS(MOTOR_CURRENT_PWM_E0) || PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
|
||||
case 2:
|
||||
#endif
|
||||
digipot_current(i, motor_current_setting[i]);
|
||||
|
|
@ -2426,7 +2426,7 @@ void Stepper::report_positions() {
|
|||
|
||||
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
|
||||
|
||||
void Stepper::digipot_current(const uint8_t driver, const int current) {
|
||||
void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
|
||||
|
||||
#if HAS_DIGIPOTSS
|
||||
|
||||
|
|
@ -2440,15 +2440,33 @@ void Stepper::report_positions() {
|
|||
|
||||
#define _WRITE_CURRENT_PWM(P) analogWrite(MOTOR_CURRENT_PWM_## P ##_PIN, 255L * current / (MOTOR_CURRENT_PWM_RANGE))
|
||||
switch (driver) {
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
||||
case 0: _WRITE_CURRENT_PWM(XY); break;
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
|
||||
case 1: _WRITE_CURRENT_PWM(Z); break;
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
||||
case 2: _WRITE_CURRENT_PWM(E); break;
|
||||
#endif
|
||||
case 0:
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
|
||||
_WRITE_CURRENT_PWM(X);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
|
||||
_WRITE_CURRENT_PWM(Y);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
||||
_WRITE_CURRENT_PWM(XY);
|
||||
#endif
|
||||
break;
|
||||
case 1:
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
|
||||
_WRITE_CURRENT_PWM(Z);
|
||||
#endif
|
||||
break;
|
||||
case 2:
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
||||
_WRITE_CURRENT_PWM(E);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E0)
|
||||
_WRITE_CURRENT_PWM(E0);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
|
||||
_WRITE_CURRENT_PWM(E1);
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
|
@ -2469,6 +2487,12 @@ void Stepper::report_positions() {
|
|||
|
||||
#elif HAS_MOTOR_CURRENT_PWM
|
||||
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_X_PIN);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_Y_PIN);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_XY_PIN);
|
||||
#endif
|
||||
|
|
@ -2478,12 +2502,19 @@ void Stepper::report_positions() {
|
|||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_E_PIN);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E0)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_E0_PIN);
|
||||
#endif
|
||||
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
|
||||
SET_OUTPUT(MOTOR_CURRENT_PWM_E1_PIN);
|
||||
#endif
|
||||
|
||||
refresh_motor_power();
|
||||
|
||||
// Set Timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
|
||||
SET_CS5(PRESCALER_1);
|
||||
|
||||
#ifdef __AVR__
|
||||
SET_CS5(PRESCALER_1);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
@ -2587,6 +2618,7 @@ void Stepper::report_positions() {
|
|||
SET_OUTPUT(E5_MS3_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
static const uint8_t microstep_modes[] = MICROSTEP_MODES;
|
||||
for (uint16_t i = 0; i < COUNT(microstep_modes); i++)
|
||||
microstep_mode(i, microstep_modes[i]);
|
||||
|
|
|
|||
|
|
@ -365,6 +365,8 @@
|
|||
#include "pins_RAMPS4DUE.h" // SAM3X8E env:DUE env:DUE_USB env:DUE_debug
|
||||
#elif MB(ULTRATRONICS_PRO)
|
||||
#include "pins_ULTRATRONICS_PRO.h" // SAM3X8E env:DUE env:DUE_debug
|
||||
#elif MB(ARCHIM1)
|
||||
#include "pins_ARCHIM1.h" // SAM3X8E env:DUE env:DUE_debug
|
||||
#elif MB(ARCHIM2)
|
||||
#include "pins_ARCHIM2.h" // SAM3X8E env:DUE env:DUE_debug
|
||||
#elif MB(ALLIGATOR)
|
||||
|
|
|
|||
195
Marlin/src/pins/pins_ARCHIM1.h
Normal file
195
Marlin/src/pins/pins_ARCHIM1.h
Normal file
|
|
@ -0,0 +1,195 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* ARCHIM1 pin assignment
|
||||
*
|
||||
* The Archim 1.0 board requires Arduino Archim addons installed.
|
||||
*
|
||||
* - Add the following URL to Arduino IDE's Additional Board Manager URLs:
|
||||
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
|
||||
*
|
||||
* - In the Arduino IDE Board Manager search for Archim and install the package.
|
||||
*
|
||||
* - Change your target board to "Archim".
|
||||
*
|
||||
* Further information on the UltiMachine website...
|
||||
* https://github.com/ultimachine/Archim/wiki
|
||||
*/
|
||||
|
||||
#ifndef __SAM3X8E__
|
||||
#error "Oops! Select 'Archim' in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Archim 1.0"
|
||||
|
||||
//
|
||||
// Items marked * have been altered from Archim v1.0
|
||||
//
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 20 // D20 PB12 (Header J20 20)
|
||||
#define SERVO1_PIN 21 // D21 PB13 (Header J20 19)
|
||||
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 14 // PD4 MIN ES1
|
||||
#define X_MAX_PIN 32 // PD10 MAX ES1
|
||||
#define Y_MIN_PIN 29 // PD6 MIN ES2
|
||||
#define Y_MAX_PIN 15 // PD5 MAX ES2
|
||||
#define Z_MIN_PIN 31 // PA7 MIN ES3
|
||||
#define Z_MAX_PIN 30 // PD9 MAX ES3
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN 32
|
||||
#endif
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15)
|
||||
#endif
|
||||
#ifndef FIL_RUNOUT2_PIN
|
||||
#define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16)
|
||||
#endif
|
||||
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 40 // PC8 STEP1 *
|
||||
#define X_DIR_PIN 59 // PA4 DIR1 *
|
||||
#define X_ENABLE_PIN 41 // PC9 EN1
|
||||
|
||||
#define Y_STEP_PIN 49 // PC14 STEP2 *
|
||||
#define Y_DIR_PIN 47 // PC16 DIR2 *
|
||||
#define Y_ENABLE_PIN 48 // PC15 EN2 *
|
||||
|
||||
#define Z_STEP_PIN 36 // PC4 STEP Z *
|
||||
#define Z_DIR_PIN 107 // PB10 DIR Z *
|
||||
#define Z_ENABLE_PIN 96 // PC10 EN Z -AddOns *
|
||||
|
||||
#define E0_STEP_PIN 78 // PB23 STEP3 *
|
||||
#define E0_DIR_PIN 22 // PB26 DIR3 *
|
||||
#define E0_ENABLE_PIN 97 // PB24 EN3 -Addons *
|
||||
|
||||
#define E1_STEP_PIN 26 // PD1 STEP4 *
|
||||
#define E1_DIR_PIN 27 // PD2 DIR4 *
|
||||
#define E1_ENABLE_PIN 28 // PD3 EN4 *
|
||||
|
||||
// Microstepping mode pins *
|
||||
#define X_MS1_PIN 39 // PC7 MOD0E1 - As listed in schematic
|
||||
#define X_MS2_PIN 38 // PC6 MOD1E1
|
||||
#define X_MS3_PIN 37 // PC5 MOD2E1
|
||||
|
||||
#define Y_MS1_PIN 50 // PC13 MODE0E2
|
||||
#define Y_MS2_PIN 51 // PC12 MODE1E2
|
||||
#define Y_MS3_PIN 92 // PC11 MODE2E2 - AddOns
|
||||
|
||||
#define Z_MS1_PIN 44 // PC19 MOD0E Z
|
||||
#define Z_MS2_PIN 45 // PC18 MOD1E Z
|
||||
#define Z_MS3_PIN 46 // PC17 MOD2E Z
|
||||
|
||||
#define E0_MS1_PIN 105 // PB22 MOD0E3 - AddOns
|
||||
#define E0_MS2_PIN 106 // PC27 MOD1E3 - AddOns
|
||||
#define E0_MS3_PIN 104 // PC20 MOD2E3 - AddOns
|
||||
|
||||
#define E1_MS1_PIN 25 // PD0 MOD0E4
|
||||
#define E1_MS2_PIN 18 // PA11 MOD1E4
|
||||
#define E1_MS3_PIN 19 // PA10 MOD2E4
|
||||
|
||||
// Motor current PWM pins *
|
||||
#define MOTOR_CURRENT_PWM_X_PIN 58 // PA6 X-REF TIOB2
|
||||
#define MOTOR_CURRENT_PWM_Y_PIN 12 // PD8 Y-REF TIOB8
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN 10 // PC29 Z-REF TIOB7
|
||||
#define MOTOR_CURRENT_PWM_E0_PIN 3 // PC28 E1-REF TIOA7
|
||||
#define MOTOR_CURRENT_PWM_E1_PIN 11 // PD7 E2-REF TIOA8
|
||||
|
||||
#define MOTOR_CURRENT_PWM_RANGE 2750 // (3.3 Volts * 100000 Ohms) / (100000 Ohms + 20000 Ohms) = 2.75 Volts (max vref)
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } //, 1000, 1000} // X Y Z E0 E1, 1000 = 1000mAh
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 *
|
||||
#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 *
|
||||
#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 *
|
||||
#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 *
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3
|
||||
#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4
|
||||
#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5
|
||||
#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 4 // D4 PC26 FET_PWM1
|
||||
#endif
|
||||
#define FAN1_PIN 5 // D5 PC25 FET_PWM2
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
|
||||
// Internal MicroSD card reader on the PCB
|
||||
#define INT_SCK_PIN 42 // D42 PA19/MCCK
|
||||
#define INT_MISO_PIN 43 // D43 PA20/MCCDA
|
||||
#define INT_MOSI_PIN 73 // D73 PA21/MCDA0
|
||||
#define INT_SDSS 55 // D55 PA24/MCDA3
|
||||
|
||||
// External SD card reader on SC2
|
||||
#define SCK_PIN 76 // D76 PA27
|
||||
#define MISO_PIN 74 // D74 PA25
|
||||
#define MOSI_PIN 75 // D75 PA26
|
||||
#define SDSS 87 // D87 PA29
|
||||
|
||||
// 2MB SPI Flash
|
||||
#define SPI_FLASH_SS 52 // D52 PB21
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define BEEPER_PIN 23 // D24 PA15_CTS1
|
||||
#define LCD_PINS_RS 17 // D17 PA12_RXD1
|
||||
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
|
||||
#define LCD_PINS_D4 69 // D69 PA0_CANTX0
|
||||
#define LCD_PINS_D5 54 // D54 PA16_SCK1
|
||||
#define LCD_PINS_D6 68 // D68 PA1_CANRX0
|
||||
#define LCD_PINS_D7 34 // D34 PC2_PWML0
|
||||
|
||||
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
// Buttons on AUX-2
|
||||
#define BTN_EN1 60 // D60 PA3_TIOB1
|
||||
#define BTN_EN2 13 // D13 PB27_TIOB0
|
||||
#define BTN_ENC 16 // D16 PA13_TXD1
|
||||
#endif // NEWPANEL
|
||||
#endif // ULTRA_LCD
|
||||
|
|
@ -21,53 +21,53 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* ARCHIM2 pin assignment (pins_ARCHIM2.h)
|
||||
* ARCHIM2 pin assignment
|
||||
*
|
||||
* The Archim2 board requires Arduino Archim addons installed.
|
||||
* Add the following URL to Arduino IDE's Additional Board Manager URLs:
|
||||
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
|
||||
* In the Arduino IDE Board Manager search for Archim and install the package.
|
||||
* Change your target board to "Archim".
|
||||
* The Archim 2.0 board requires Arduino Archim addons installed.
|
||||
*
|
||||
* Further information is provided by UltiMachine
|
||||
* https://github.com/ultimachine/Archim/wiki/Archim-v2.0
|
||||
* https://github.com/ultimachine/Archim/wiki
|
||||
* - Add the following URL to Arduino IDE's Additional Board Manager URLs:
|
||||
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
|
||||
*
|
||||
* - In the Arduino IDE Board Manager search for Archim and install the package.
|
||||
*
|
||||
* - Change your target board to "Archim".
|
||||
*
|
||||
* Further information on the UltiMachine website...
|
||||
* https://github.com/ultimachine/Archim/wiki
|
||||
*/
|
||||
|
||||
#ifndef __SAM3X8E__
|
||||
#error "Oops! Select 'Archim' in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Archim 2.0"
|
||||
|
||||
//
|
||||
// Items marked * have been altered from Archim v1.0
|
||||
//
|
||||
|
||||
// TMC2130 Diag Pins (currently just for reference)
|
||||
#define X_DIAG_PIN 59 // PA4 X_DIAG
|
||||
#define Y_DIAG_PIN 48 // PC15 Y_DIAG
|
||||
#define Z_DIAG_PIN 36 // PC4 Z_DIAG
|
||||
#define E0_DIAG_PIN 78 // PB23 E1_DIAG
|
||||
#define E1_DIAG_PIN 25 // PD0 E2_DIAG
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 20 // D20 PB12 (Header J20 20)
|
||||
#define SERVO1_PIN 21 // D21 PB13 (Header J20 19)
|
||||
#define SERVO0_PIN 20 // D20 PB12 (Header J20 20)
|
||||
#define SERVO1_PIN 21 // D21 PB13 (Header J20 19)
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
|
||||
// Otherwise use a physical endstop based configuration.
|
||||
|
||||
#if DISABLED(SENSORLESS_HOMING)
|
||||
#define X_MIN_PIN 14 // PD4 MIN ES1
|
||||
#define X_MAX_PIN 32 // PD10 MAX ES1
|
||||
#define Y_MIN_PIN 29 // PD6 MIN ES2
|
||||
#define Y_MAX_PIN 15 // PD5 MAX ES2
|
||||
#else
|
||||
#if ENABLED(SENSORLESS_HOMING)
|
||||
|
||||
// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
|
||||
// Otherwise use a physical endstop based configuration.
|
||||
|
||||
// TMC2130 Diag Pins
|
||||
#define X_DIAG_PIN 59 // PA4
|
||||
#define Y_DIAG_PIN 48 // PC15
|
||||
#define Z_DIAG_PIN 36 // PC4
|
||||
#define E0_DIAG_PIN 78 // PB23
|
||||
#define E1_DIAG_PIN 25 // PD0
|
||||
|
||||
#if X_HOME_DIR == -1
|
||||
#define X_MIN_PIN X_DIAG_PIN
|
||||
#define X_MAX_PIN 32
|
||||
|
|
@ -83,10 +83,18 @@
|
|||
#define Y_MIN_PIN 29
|
||||
#define Y_MAX_PIN Y_DIAG_PIN
|
||||
#endif
|
||||
|
||||
#else
|
||||
|
||||
#define X_MIN_PIN 14 // PD4 MIN ES1
|
||||
#define X_MAX_PIN 32 // PD10 MAX ES1
|
||||
#define Y_MIN_PIN 29 // PD6 MIN ES2
|
||||
#define Y_MAX_PIN 15 // PD5 MAX ES2
|
||||
|
||||
#endif
|
||||
|
||||
#define Z_MIN_PIN 31 // PA7 MIN ES3
|
||||
#define Z_MAX_PIN 30 // PD9 MAX ES3
|
||||
#define Z_MIN_PIN 31 // PA7 MIN ES3
|
||||
#define Z_MAX_PIN 30 // PD9 MAX ES3
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
|
|
@ -95,6 +103,13 @@
|
|||
#define Z_MIN_PROBE_PIN 32
|
||||
#endif
|
||||
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15)
|
||||
#endif
|
||||
#ifndef FIL_RUNOUT2_PIN
|
||||
#define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16)
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
|
|
@ -154,45 +169,39 @@
|
|||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 4 // D4 PC26 FET_PWM1
|
||||
#endif
|
||||
#define FAN1_PIN 5 // D5 PC25 FET_PWM2
|
||||
|
||||
#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3
|
||||
#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4
|
||||
#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5
|
||||
#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 4 // D4 PC26 FET_PWM1
|
||||
#endif
|
||||
#define FAN1_PIN 5 // D5 PC25 FET_PWM2
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
|
||||
// Internal MicroSD card reader on the PCB
|
||||
#define INT_SCK_PIN 42 // D42 PA19/MCCK
|
||||
#define INT_MISO_PIN 43 // D43 PA20/MCCDA
|
||||
#define INT_MOSI_PIN 73 // D73 PA21/MCDA0
|
||||
#define INT_SDSS 55 // D55 PA24/MCDA3
|
||||
#define INT_SCK_PIN 42 // D42 PA19/MCCK
|
||||
#define INT_MISO_PIN 43 // D43 PA20/MCCDA
|
||||
#define INT_MOSI_PIN 73 // D73 PA21/MCDA0
|
||||
#define INT_SDSS 55 // D55 PA24/MCDA3
|
||||
|
||||
// The external SD card reader on SC2, as well as 2 Mbyte SPI Flash
|
||||
#define SCK_PIN 76 // D76 PA27
|
||||
#define MISO_PIN 74 // D74 PA25
|
||||
#define MOSI_PIN 75 // D75 PA26
|
||||
#define SDSS 87 // D87 PA29
|
||||
#define SPI_FLASH_SS 52 // D52 PB21
|
||||
// External SD card reader on SC2
|
||||
#define SCK_PIN 76 // D76 PA27
|
||||
#define MISO_PIN 74 // D74 PA25
|
||||
#define MOSI_PIN 75 // D75 PA26
|
||||
#define SDSS 87 // D87 PA29
|
||||
|
||||
// Filament runout sensor pins (or GPIO)
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15)
|
||||
#endif
|
||||
#ifndef FIL_RUNOUT2_PIN
|
||||
#define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16)
|
||||
#endif
|
||||
// 2MB SPI Flash
|
||||
#define SPI_FLASH_SS 52 // D52 PB21
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define BEEPER_PIN 23 // D24 PA15_CTS1
|
||||
#define LCD_PINS_RS 17 // D17 PA12_RXD1
|
||||
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
|
||||
|
|
@ -209,4 +218,4 @@
|
|||
#define BTN_EN2 13 // D13 PB27_TIOB0
|
||||
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
|
||||
#endif // NEWPANEL
|
||||
#endif // ULTRA_LCD || EXTENSIBLE_UI
|
||||
#endif // ULTRA_LCD
|
||||
|
|
|
|||
Loading…
Reference in a new issue