Poll all endstops, even when stationary (#11123)

This commit is contained in:
Scott Lahteine 2018-06-27 04:18:57 -04:00 committed by GitHub
parent 3b3029c4bf
commit 053438a3aa
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 81 additions and 94 deletions

View file

@ -1528,6 +1528,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING when homing to Y_MIN." #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING when homing to Y_MIN."
#elif Y_HOME_DIR == 1 && DISABLED(Y_MAX_ENDSTOP_INVERTING) #elif Y_HOME_DIR == 1 && DISABLED(Y_MAX_ENDSTOP_INVERTING)
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING when homing to Y_MAX." #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING when homing to Y_MAX."
#elif ENABLED(ENDSTOP_NOISE_FILTER)
#error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER."
#endif #endif
#endif #endif

View file

@ -429,10 +429,8 @@ void Endstops::update() {
#endif #endif
/** /**
* Check and update endstops according to conditions * Check and update endstops
*/ */
if (stepper.axis_is_moving(X_AXIS)) {
if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction
#if HAS_X_MIN #if HAS_X_MIN
#if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR < 0 #if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR < 0
UPDATE_ENDSTOP_BIT(X, MIN); UPDATE_ENDSTOP_BIT(X, MIN);
@ -442,11 +440,10 @@ void Endstops::update() {
COPY_LIVE_STATE(X_MIN, X2_MIN); COPY_LIVE_STATE(X_MIN, X2_MIN);
#endif #endif
#else #else
if (X_MIN_TEST) UPDATE_ENDSTOP_BIT(X, MIN); UPDATE_ENDSTOP_BIT(X, MIN);
#endif #endif
#endif #endif
}
else { // +direction
#if HAS_X_MAX #if HAS_X_MAX
#if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR > 0 #if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR > 0
UPDATE_ENDSTOP_BIT(X, MAX); UPDATE_ENDSTOP_BIT(X, MAX);
@ -456,14 +453,10 @@ void Endstops::update() {
COPY_LIVE_STATE(X_MAX, X2_MAX); COPY_LIVE_STATE(X_MAX, X2_MAX);
#endif #endif
#else #else
if (X_MAX_TEST) UPDATE_ENDSTOP_BIT(X, MAX); UPDATE_ENDSTOP_BIT(X, MAX);
#endif #endif
#endif #endif
}
}
if (stepper.axis_is_moving(Y_AXIS)) {
if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
#if HAS_Y_MIN && Y_HOME_DIR < 0 #if HAS_Y_MIN && Y_HOME_DIR < 0
#if ENABLED(Y_DUAL_ENDSTOPS) #if ENABLED(Y_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Y, MIN); UPDATE_ENDSTOP_BIT(Y, MIN);
@ -476,8 +469,7 @@ void Endstops::update() {
UPDATE_ENDSTOP_BIT(Y, MIN); UPDATE_ENDSTOP_BIT(Y, MIN);
#endif #endif
#endif #endif
}
else { // +direction
#if HAS_Y_MAX && Y_HOME_DIR > 0 #if HAS_Y_MAX && Y_HOME_DIR > 0
#if ENABLED(Y_DUAL_ENDSTOPS) #if ENABLED(Y_DUAL_ENDSTOPS)
UPDATE_ENDSTOP_BIT(Y, MAX); UPDATE_ENDSTOP_BIT(Y, MAX);
@ -490,11 +482,7 @@ void Endstops::update() {
UPDATE_ENDSTOP_BIT(Y, MAX); UPDATE_ENDSTOP_BIT(Y, MAX);
#endif #endif
#endif #endif
}
}
if (stepper.axis_is_moving(Z_AXIS)) {
if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
#if HAS_Z_MIN #if HAS_Z_MIN
#if ENABLED(Z_DUAL_ENDSTOPS) && Z_HOME_DIR < 0 #if ENABLED(Z_DUAL_ENDSTOPS) && Z_HOME_DIR < 0
UPDATE_ENDSTOP_BIT(Z, MIN); UPDATE_ENDSTOP_BIT(Z, MIN);
@ -504,7 +492,7 @@ void Endstops::update() {
COPY_LIVE_STATE(Z_MIN, Z2_MIN); COPY_LIVE_STATE(Z_MIN, Z2_MIN);
#endif #endif
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
if (z_probe_enabled) UPDATE_ENDSTOP_BIT(Z, MIN); UPDATE_ENDSTOP_BIT(Z, MIN);
#elif Z_HOME_DIR < 0 #elif Z_HOME_DIR < 0
UPDATE_ENDSTOP_BIT(Z, MIN); UPDATE_ENDSTOP_BIT(Z, MIN);
#endif #endif
@ -512,10 +500,9 @@ void Endstops::update() {
// When closing the gap check the enabled probe // When closing the gap check the enabled probe
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if ENABLED(Z_MIN_PROBE_ENDSTOP)
if (z_probe_enabled) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
#endif #endif
}
else { // Z +direction. Gantry up, bed down.
#if HAS_Z_MAX && Z_HOME_DIR > 0 #if HAS_Z_MAX && Z_HOME_DIR > 0
// Check both Z dual endstops // Check both Z dual endstops
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
@ -530,8 +517,6 @@ void Endstops::update() {
UPDATE_ENDSTOP_BIT(Z, MAX); UPDATE_ENDSTOP_BIT(Z, MAX);
#endif #endif
#endif #endif
}
}
#if ENABLED(ENDSTOP_NOISE_FILTER) #if ENABLED(ENDSTOP_NOISE_FILTER)
/** /**