zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

IDEX Improvements (#11848)

Browse source
This commit is contained in:
Roxy-3D 2018-09-17 01:06:22 -05:00 committed by Scott Lahteine
parent 39732838b4
commit 0780913848
24 changed files with 285 additions and 115 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
View file

@ -22,7 +22,7 @@
//#define TREX3 // Turn this on for T-Rex 3 features like dual filament run out sensors
#define ROXYs_TRex // Turn this on to get customizations only available on Roxy's T-Rex 2+
//#define ROXYs_TRex // Turn this on to get customizations only available on Roxy's T-Rex 2+
// Marlin controlled heat bed, Max7219 debug LED's, less bright LED light level
// More aggressive PID numbers for hotends (due to double fans)
/**

4
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -385,9 +385,7 @@
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
// Mode 3 (DXC_SYMMETRIC_DUPLICATION_MODE) : Symmetric Duplication mode. The firmware will perform similarly to DXC_DUPLICATION_MODE except in a mirror
// image of the first x-carriage. ie. If you are printing a right hand shoe on the 1st extruder, you will
// get a left hand shoe on the 2nd extruder.
// Mode 3 (DXC_SCALED_DUPLICATION_MODE) : Not working yet, but support routines in place
// This is the default power-up mode which can be later using M605.
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE

2
Marlin/src/feature/Max7219_Debug_LEDs.cpp
View file

@ -56,6 +56,8 @@ uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 };
#if _ROT == 0 || _ROT == 270
#define _LED_BIT(Q) (7 - ((Q) & 0x7))
#define _LED_UNIT(Q) ((Q) & ~0x7)
//#define _LED_UNIT(Q) ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3) // some Max7219 boards have rotated the matrix
// this line can be substituted to correct orientation
#else
#define _LED_BIT(Q) ((Q) & 0x7)
#define _LED_UNIT(Q) ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3)

66
Marlin/src/feature/pause.cpp
View file

@ -140,6 +140,7 @@ static void do_pause_e_move(const float &length, const float &fr) {
bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=0*/, const int8_t max_beep_count/*=0*/,
const bool show_lcd/*=false*/, const bool pause_for_user/*=false*/,
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/
DXC_ARGS
) {
#if DISABLED(ULTIPANEL)
UNUSED(show_lcd);
@ -184,6 +185,13 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode);
#endif
#if ENABLED(DUAL_X_CARRIAGE)
const int8_t saved_ext = active_extruder;
const bool saved_ext_dup_mode = extruder_duplication_enabled;
active_extruder = DXC_ext;
extruder_duplication_enabled = false;
#endif
// Slow Load filament
if (slow_load_length) do_pause_e_move(slow_load_length, FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE);
@ -201,6 +209,12 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
#endif
}
#if ENABLED(DUAL_X_CARRIAGE) // Tie the two extruders movement back together.
active_extruder = saved_ext;
extruder_duplication_enabled = saved_ext_dup_mode;
stepper.set_directions();
#endif
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
#if ENABLED(ULTIPANEL)
@ -328,7 +342,8 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
*/
uint8_t did_pause_print = 0;
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length/*=0*/, const bool show_lcd/*=false*/) {
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length/*=0*/, const bool show_lcd/*=false*/ DXC_ARGS) {
if (did_pause_print) return false; // already paused
#ifdef ACTION_ON_PAUSE
@ -380,10 +395,22 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
if (!axis_unhomed_error())
Nozzle::park(2, park_point);
// Unload the filament
if (unload_length)
#if ENABLED(DUAL_X_CARRIAGE)
const int8_t saved_ext = active_extruder;
const bool saved_ext_dup_mode = extruder_duplication_enabled;
active_extruder = DXC_ext;
extruder_duplication_enabled = false;
#endif
if (unload_length) // Unload the filament
unload_filament(unload_length, show_lcd);
#if ENABLED(DUAL_X_CARRIAGE)
active_extruder = saved_ext;
extruder_duplication_enabled = saved_ext_dup_mode;
stepper.set_directions();
#endif
return true;
}
@ -394,7 +421,7 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
*
* Used by M125 and M600
*/
void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
void wait_for_filament_reload(const int8_t max_beep_count/*=0*/ DXC_ARGS) {
bool nozzle_timed_out = false;
#if ENABLED(ULTIPANEL)
@ -413,6 +440,13 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
HOTEND_LOOP()
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
#if ENABLED(DUAL_X_CARRIAGE)
const int8_t saved_ext = active_extruder;
const bool saved_ext_dup_mode = extruder_duplication_enabled;
active_extruder = DXC_ext;
extruder_duplication_enabled = false;
#endif
// Wait for filament insert by user and press button
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true; // LCD click or M108 will clear this
@ -477,6 +511,11 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
idle(true);
}
#if ENABLED(DUAL_X_CARRIAGE)
active_extruder = saved_ext;
extruder_duplication_enabled = saved_ext_dup_mode;
stepper.set_directions();
#endif
KEEPALIVE_STATE(IN_HANDLER);
}
@ -498,7 +537,15 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
* - Send host action for resume, if configured
* - Resume the current SD print job, if any
*/
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/) {
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {
/*
SERIAL_ECHOPGM("start of resume_print()\n");
SERIAL_ECHOPAIR("\ndual_x_carriage_mode:", dual_x_carriage_mode);
SERIAL_ECHOPAIR("\nextruder_duplication_enabled:", extruder_duplication_enabled);
SERIAL_ECHOPAIR("\nactive_extruder:", active_extruder);
SERIAL_ECHOPGM("\n\n");
*/
if (!did_pause_print) return;
// Re-enable the heaters if they timed out
@ -508,14 +555,11 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
thermalManager.reset_heater_idle_timer(e);
}
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) {
// Load the new filament
load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out);
}
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) // Load the new filament
load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out, ADVANCED_PAUSE_MODE_PAUSE_PRINT DXC_PASS);
#if ENABLED(ULTIPANEL)
// "Wait for print to resume"
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_RESUME);
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_RESUME); // "Wait for print to resume"
#endif
// Intelligent resuming

18
Marlin/src/feature/pause.h
View file

@ -67,14 +67,24 @@ extern float filament_change_unload_length[EXTRUDERS],
extern uint8_t did_pause_print;
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false);
#if ENABLED(DUAL_X_CARRIAGE)
#define DXC_PARAMS , const int8_t DXC_ext=-1
#define DXC_ARGS , const int8_t DXC_ext
#define DXC_PASS , DXC_ext
#else
#define DXC_PARAMS
#define DXC_ARGS
#define DXC_PASS
#endif
void wait_for_filament_reload(const int8_t max_beep_count=0);
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false DXC_PARAMS);
void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH, const int8_t max_beep_count=0);
void wait_for_filament_reload(const int8_t max_beep_count=0 DXC_PARAMS);
void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH, const int8_t max_beep_count=0 DXC_PARAMS);
bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0, const bool show_lcd=false,
const bool pause_for_user=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT);
const bool pause_for_user=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT DXC_PARAMS);
bool unload_filament(const float &unload_length, const bool show_lcd=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT);

39
Marlin/src/feature/runout.h
View file

@ -62,22 +62,31 @@ class FilamentRunoutSensor {
#else
// Read the sensor for the active extruder
bool is_out;
switch (active_extruder) {
case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 2
case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 3
case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 4
case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 5
case 5: is_out = READ(FIL_RUNOUT6_PIN) == FIL_RUNOUT_INVERTING; break;
#endif
#endif
#endif
#endif
#if ENABLED(DUAL_X_CARRIAGE)
const bool out1 = READ(FIL_RUNOUT_PIN ) == FIL_RUNOUT_INVERTING,
out2 = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING;
if (extruder_duplication_enabled)
is_out = out1 || out2;
else
is_out = active_extruder ? out2 : out1;
#else
switch (active_extruder) {
case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 2
case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 3
case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 4
case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
#if NUM_RUNOUT_SENSORS > 5
case 5: is_out = READ(FIL_RUNOUT6_PIN) == FIL_RUNOUT_INVERTING; break;
#endif // > 5
#endif // > 4
#endif // > 3
#endif // > 2
}
#endif
#endif
return (is_out ? ++runout_count : (runout_count = 0)) > FIL_RUNOUT_THRESHOLD;
}

5
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -369,7 +369,7 @@ void GcodeSuite::G28(const bool always_home_all) {
*/
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) {
if (dxc_is_duplicating()) {
// Always home the 2nd (right) extruder first
active_extruder = 1;
@ -387,7 +387,10 @@ void GcodeSuite::G28(const bool always_home_all) {
delayed_move_time = 0;
active_extruder_parked = true;
extruder_duplication_enabled = IDEX_saved_duplication_state;
extruder_duplication_enabled = false;
dual_x_carriage_mode = IDEX_saved_mode;
stepper.set_directions();
}
#endif // DUAL_X_CARRIAGE

65
Marlin/src/gcode/control/M605.cpp
View file

@ -44,9 +44,9 @@
* units x-offset and an optional differential hotend temperature of
* mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate
* the first with a spacing of 100mm in the x direction and 2 degrees hotter.
* M605 S3 : Enable Symmetric Duplication mode. The second extruder will duplicate the first extruder's
* M605 S3 : Enable Scaled Duplication mode. The second extruder will duplicate the first extruder's
* movement similar to the M605 S2 mode. However, the second extruder will be producing
* a mirror image of the first extruder. The initial x-offset and temperature differential are
* a scaled image of the first extruder. The initial x-offset and temperature differential are
* set with M605 S2 [Xnnn] [Rmmm] and then followed with a M605 S3 to start the mirrored movement.
* M605 W : IDEX What? command.
*
@ -56,7 +56,27 @@
planner.synchronize();
if (parser.seen('S')) {
const DualXMode previous_mode = dual_x_carriage_mode;
dual_x_carriage_mode = (DualXMode)parser.value_byte();
scaled_duplication_mode = false;
if (dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE) {
if (previous_mode != DXC_DUPLICATION_MODE) {
SERIAL_ECHOPGM("Printer must be in DXC_DUPLICATION_MODE prior to \n");
SERIAL_ECHOPGM("specifying DXC_SCALED_DUPLICATION_MODE.\n");
dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
return;
}
scaled_duplication_mode = true;
stepper.set_directions();
float x_jog = current_position[X_AXIS] - .1;
for (uint8_t i = 2; --i;) {
planner.buffer_line(x_jog, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, 0);
x_jog += .1;
}
return;
}
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
@ -73,6 +93,7 @@
}
active_extruder_parked = false;
extruder_duplication_enabled = false;
stepper.set_directions();
delayed_move_time = 0;
}
else if (!parser.seen('W')) // if no S or W parameter, the DXC mode gets reset to the user's default
@ -82,21 +103,45 @@
SERIAL_ECHO_START();
SERIAL_ECHOPGM("IDEX mode: ");
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE: SERIAL_ECHOPGM("DXC_FULL_CONTROL_MODE"); break;
case DXC_AUTO_PARK_MODE: SERIAL_ECHOPGM("DXC_AUTO_PARK_MODE"); break;
case DXC_DUPLICATION_MODE: SERIAL_ECHOPGM("DXC_DUPLICATION_MODE"); break;
case DXC_FULL_CONTROL_MODE: SERIAL_ECHOPGM("DXC_FULL_CONTROL_MODE"); break;
case DXC_AUTO_PARK_MODE: SERIAL_ECHOPGM("DXC_AUTO_PARK_MODE"); break;
case DXC_DUPLICATION_MODE: SERIAL_ECHOPGM("DXC_DUPLICATION_MODE"); break;
case DXC_SCALED_DUPLICATION_MODE: SERIAL_ECHOPGM("DXC_SCALED_DUPLICATION_MODE"); break;
}
SERIAL_ECHOPAIR("\nActive Ext: ", int(active_extruder));
if (!active_extruder_parked) SERIAL_ECHOPGM(" NOT ");
SERIAL_ECHOLNPGM(" parked.");
SERIAL_ECHOPAIR("active_extruder_x_pos: ", current_position[X_AXIS]);
SERIAL_ECHOPAIR(" inactive_extruder_x_pos: ", inactive_extruder_x_pos);
SERIAL_ECHOPAIR("\nT0 Home X: ", x_home_pos(0));
SERIAL_ECHOPAIR("\nT1 Home X: ", x_home_pos(1));
SERIAL_ECHOPGM(" parked.");
SERIAL_ECHOPAIR("\nactive_extruder_x_pos: ", current_position[X_AXIS]);
SERIAL_ECHOPAIR("\ninactive_extruder_x_pos: ", inactive_extruder_x_pos);
SERIAL_ECHOPAIR("\nextruder_duplication_enabled: ", int(extruder_duplication_enabled));
SERIAL_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
SERIAL_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
SERIAL_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time);
SERIAL_ECHOPAIR("\nX1 Home X: ", x_home_pos(0));
SERIAL_ECHOPAIR("\nX1_MIN_POS=", int(X1_MIN_POS));
SERIAL_ECHOPAIR("\nX1_MAX_POS=", int(X1_MAX_POS));
SERIAL_ECHOPAIR("\nX2 Home X: ", x_home_pos(1));
SERIAL_ECHOPAIR("\nX2_MIN_POS=", int(X2_MIN_POS));
SERIAL_ECHOPAIR("\nX2_MAX_POS=", int(X2_MAX_POS));
SERIAL_ECHOPAIR("\nX2_HOME_DIR=", int(X2_HOME_DIR));
SERIAL_ECHOPAIR("\nX2_HOME_POS=", int(X2_HOME_POS));
SERIAL_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
SERIAL_ECHOPAIR("\nTOOLCHANGE_PARK_ZLIFT=", float(TOOLCHANGE_PARK_ZLIFT));
SERIAL_ECHOPAIR("\nTOOLCHANGE_UNPARK_ZLIFT=", float(TOOLCHANGE_UNPARK_ZLIFT));
SERIAL_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", int(DEFAULT_DUPLICATION_X_OFFSET));
SERIAL_EOL();
for (uint8_t i = 0; i < 2; i++) {
SERIAL_ECHOPAIR(" nozzle:", int(i));
LOOP_XYZ(j) {
SERIAL_ECHOPGM(" hotend_offset[");
SERIAL_CHAR(axis_codes[j]);
SERIAL_ECHOPAIR("_AXIS][", int(i));
SERIAL_ECHOPAIR("]=", hotend_offset[j][i]);
}
SERIAL_EOL();
}
SERIAL_EOL();
}
}

2
Marlin/src/gcode/feature/leds/M7219.cpp
View file

@ -79,7 +79,7 @@ void GcodeSuite::M7219() {
SERIAL_ECHOPGM("led_line[");
if (r < 10) SERIAL_CHAR(' ');
SERIAL_ECHO(int(r));
SERIAL_ECHO("]=");
SERIAL_ECHOPGM("]=");
for (uint8_t b = 8; b--;) SERIAL_CHAR('0' + TEST(max7219.led_line[r], b));
SERIAL_EOL();
}

31
Marlin/src/gcode/feature/pause/M600.cpp
View file

@ -56,6 +56,19 @@ void GcodeSuite::M600() {
if (get_target_extruder_from_command()) return;
#if ENABLED(DUAL_X_CARRIAGE)
int8_t DXC_ext = target_extruder;
if (!parser.seen('T')) { // If no tool index is specified, M600 was (probably) sent in response to filament runout.
// In this case, for duplicating modes set DXC_ext to the extruder that ran out.
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
if (dxc_is_duplicating())
DXC_ext = (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING) ? 1 : 0;
#else
DXC_ext = active_extruder;
#endif
}
#endif
// Show initial "wait for start" message
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, target_extruder);
@ -63,14 +76,18 @@ void GcodeSuite::M600() {
#if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
// Don't allow filament change without homing first
if (axis_unhomed_error()) home_all_axes();
if (axis_unhomed_error()) gcode.home_all_axes();
#endif
#if EXTRUDERS > 1
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
tool_change(target_extruder, 0, true);
const uint8_t active_extruder_before_filament_change = active_extruder;
if (
active_extruder != target_extruder
#if ENABLED(DUAL_X_CARRIAGE)
&& dual_x_carriage_mode != DXC_DUPLICATION_MODE && dual_x_carriage_mode != DXC_SCALED_DUPLICATION_MODE
#endif
) tool_change(target_extruder, 0, true);
#endif
// Initial retract before move to filament change position
@ -113,9 +130,9 @@ void GcodeSuite::M600() {
const bool job_running = print_job_timer.isRunning();
if (pause_print(retract, park_point, unload_length, true)) {
wait_for_filament_reload(beep_count);
resume_print(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, beep_count);
if (pause_print(retract, park_point, unload_length, true DXC_PASS)) {
wait_for_filament_reload(beep_count DXC_PASS);
resume_print(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, beep_count DXC_PASS);
}
#if EXTRUDERS > 1

6
Marlin/src/gcode/feature/pause/M701_M702.cpp
View file

@ -81,7 +81,11 @@ void GcodeSuite::M701() {
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: filament_change_load_length[active_extruder]);
load_filament(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS,
true, thermalManager.wait_for_heating(target_extruder), ADVANCED_PAUSE_MODE_LOAD_FILAMENT);
true, thermalManager.wait_for_heating(target_extruder), ADVANCED_PAUSE_MODE_LOAD_FILAMENT
#if ENABLED(DUAL_X_CARRIAGE)
, target_extruder
#endif
);
// Restore Z axis
if (park_point.z > 0)

6
Marlin/src/gcode/queue.cpp
View file

@ -139,12 +139,12 @@ inline bool _enqueuecommand(const char* cmd, bool say_ok=false
*/
bool enqueue_and_echo_command(const char* cmd) {
//SERIAL_ECHO("enqueue_and_echo_command(\"");
//SERIAL_ECHOPGM("enqueue_and_echo_command(\"");
//SERIAL_ECHO(cmd);
//SERIAL_ECHO("\") \n");
//SERIAL_ECHOPGM("\") \n");
if (*cmd == 0 || *cmd == '\n' || *cmd == '\r') {
//SERIAL_ECHO("Null command found... Did not queue!\n");
//SERIAL_ECHOPGM("Null command found... Did not queue!\n");
return true;
}

4
Marlin/src/gcode/temperature/M104_M109.cpp
View file

@ -53,7 +53,7 @@ void GcodeSuite::M104() {
thermalManager.setTargetHotend(temp, e);
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && e == 0)
if (dxc_is_duplicating() && e == 0)
thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
#endif
@ -103,7 +103,7 @@ void GcodeSuite::M109() {
thermalManager.setTargetHotend(temp, target_extruder);
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
if (dxc_is_duplicating() && target_extruder == 0)
thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
#endif

15
Marlin/src/lcd/language/language_en.h
View file

@ -214,9 +214,24 @@
#ifndef MSG_IDEX_MODE_DUPLICATE
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplication")
#endif
#ifndef MSG_IDEX_MODE_SCALED_COPY
#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Scaled copy")
#endif
#ifndef MSG_IDEX_MODE_FULL_CTRL
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Full control")
#endif
#ifndef MSG_IDEX_X_OFFSET
#define MSG_IDEX_X_OFFSET _UxGT("2nd nozzle X")
#endif
#ifndef MSG_IDEX_Y_OFFSET
#define MSG_IDEX_Y_OFFSET _UxGT("2nd nozzle Y")
#endif
#ifndef MSG_IDEX_Z_OFFSET
#define MSG_IDEX_Z_OFFSET _UxGT("2nd nozzle Z")
#endif
#ifndef MSG_IDEX_SAVE_OFFSETS
#define MSG_IDEX_SAVE_OFFSETS _UxGT("Save Offsets")
#endif
#ifndef MSG_UBL_MANUAL_MESH
#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
#endif

30
Marlin/src/lcd/ultralcd.cpp
View file

@ -38,6 +38,8 @@
#include "../gcode/gcode.h"
#include "../gcode/queue.h"
#include "../module/configuration_store.h"
#include "../module/tool_change.h"
#include "../Marlin.h"
@ -521,7 +523,7 @@ uint16_t max_display_update_time = 0;
if (currentScreen == lcd_status_screen)
doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL;
}
else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms) && (planner.movesplanned() || IS_SD_PRINTING))
else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms)/* && (planner.movesplanned() || IS_SD_PRINTING)*/)
screen =
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
lcd_babystep_zoffset
@ -1038,15 +1040,31 @@ void lcd_quick_feedback(const bool clear_buttons) {
* IDEX submenu
*/
#if ENABLED(DUAL_X_CARRIAGE)
static void _recalc_IDEX_settings() {
if (active_extruder) { // For the 2nd extruder re-home so the next tool-change gets the new offsets.
enqueue_and_echo_commands_P(PSTR("G28")); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary.
active_extruder = 0;
}
}
static void IDEX_menu() {
START_MENU();
MENU_BACK(MSG_MAIN);
MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100"));
if (!TEST(axis_known_position, Y_AXIS) || !TEST(axis_known_position, Z_AXIS))
MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, PSTR("T0\nG28\nM605 S2 X200\nG28 X\nG1 X100")); // If Y or Z is not homed, a full G28 is done first.
else
MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, PSTR("T0\nM605 S2 X200\nG28 X\nG1 X100")); // If Y and Z is homed, a full G28 is not needed first.
MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100"));
const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS));
MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, need_g28
? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100") // If Y or Z is not homed, do a full G28 first
: PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100")
);
MENU_ITEM(gcode, MSG_IDEX_MODE_SCALED_COPY, need_g28
? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") // If Y or Z is not homed, do a full G28 first
: PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200")
);
MENU_ITEM(gcode, MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X"));
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_X_OFFSET , &hotend_offset[X_AXIS][1], MIN(X2_HOME_POS, X2_MAX_POS) - 25.0, MAX(X2_HOME_POS, X2_MAX_POS) + 25.0, _recalc_IDEX_settings);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Y_OFFSET , &hotend_offset[Y_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Z_OFFSET , &hotend_offset[Z_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings);
MENU_ITEM(gcode, MSG_IDEX_SAVE_OFFSETS, PSTR("M500"));
END_MENU();
}
#endif // DUAL_X_CARRIAGE

3
Marlin/src/module/configuration_store.cpp
View file

@ -1886,6 +1886,9 @@ void MarlinSettings::reset(PORTARG_SOLO) {
"Offsets for the first hotend must be 0.0."
);
LOOP_XYZ(i) HOTEND_LOOP() hotend_offset[i][e] = tmp4[i][e];
#if ENABLED(DUAL_X_CARRIAGE)
hotend_offset[X_AXIS][1] = MAX(X2_HOME_POS, X2_MAX_POS);
#endif
#endif
//

22
Marlin/src/module/motion.cpp
View file

@ -760,7 +760,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
bool extruder_duplication_enabled = false, // Used in Dual X mode 2 & 3
symmetric_duplication_mode = false; // Used in Dual X mode 2 & 3
scaled_duplication_mode = false; // Used in Dual X mode 2 & 3
#endif
#if ENABLED(DUAL_X_CARRIAGE)
@ -818,8 +818,6 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
#define RAISED_Y raised_parked_position[Y_AXIS]
#define RAISED_Z raised_parked_position[Z_AXIS]
//SERIAL_ECHOLNPGM("dual_x_carriage_unpark()\n");
if ( planner.buffer_line(RAISED_X, RAISED_Y, RAISED_Z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder))
if (planner.buffer_line( CUR_X, CUR_Y, RAISED_Z, CUR_E, PLANNER_XY_FEEDRATE(), active_extruder))
planner.buffer_line( CUR_X, CUR_Y, CUR_Z, CUR_E, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
@ -829,6 +827,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Clear active_extruder_parked");
#endif
break;
case DXC_SCALED_DUPLICATION_MODE:
case DXC_DUPLICATION_MODE:
if (active_extruder == 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -839,10 +838,12 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
#endif
// move duplicate extruder into correct duplication position.
planner.set_position_mm(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
if (!planner.buffer_line(
current_position[X_AXIS] + duplicate_extruder_x_offset,
current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS],
planner.max_feedrate_mm_s[X_AXIS], 1)
dual_x_carriage_mode == DXC_DUPLICATION_MODE ? duplicate_extruder_x_offset + current_position[X_AXIS] : inactive_extruder_x_pos,
current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS],
planner.max_feedrate_mm_s[X_AXIS], 1
)
) break;
planner.synchronize();
sync_plan_position();
@ -860,6 +861,7 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
break;
}
}
stepper.set_directions();
return false;
}
@ -906,9 +908,9 @@ void prepare_move_to_destination() {
if (
#if UBL_SEGMENTED
// ubl.prepare_segmented_line_to(destination, MMS_SCALED(feedrate_mm_s)) // This does not seem to work correctly on UBL.
#if ENABLED(DELTA) // A Delta case and a Cartesian case can work
ubl.prepare_segmented_line_to(destination, MMS_SCALED(feedrate_mm_s)) // around the problem until it is fixed.
//ubl.prepare_segmented_line_to(destination, MMS_SCALED(feedrate_mm_s)) // This doesn't seem to work correctly on UBL.
#if IS_KINEMATIC // Use Kinematic / Cartesian cases as a workaround for now.
ubl.prepare_segmented_line_to(destination, MMS_SCALED(feedrate_mm_s))
#else
prepare_move_to_destination_cartesian()
#endif
@ -1499,7 +1501,7 @@ void homeaxis(const AxisEnum axis) {
soft_endstop_min[X_AXIS] = X2_MIN_POS;
soft_endstop_max[X_AXIS] = dual_max_x;
}
else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) {
else if (dxc_is_duplicating()) {
// In Duplication Mode, T0 can move as far left as X_MIN_POS
// but not so far to the right that T1 would move past the end
soft_endstop_min[X_AXIS] = base_min_pos(X_AXIS);

11
Marlin/src/module/motion.h
View file

@ -305,7 +305,7 @@ void homeaxis(const AxisEnum axis);
*/
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
extern bool extruder_duplication_enabled, // Used in Dual X mode 2
symmetric_duplication_mode; // Used in Dual X mode 2
scaled_duplication_mode; // Used in Dual X mode 3
#endif
/**
@ -314,9 +314,10 @@ void homeaxis(const AxisEnum axis);
#if ENABLED(DUAL_X_CARRIAGE)
enum DualXMode : char {
DXC_FULL_CONTROL_MODE, // DUAL_X_CARRIAGE only
DXC_AUTO_PARK_MODE, // DUAL_X_CARRIAGE only
DXC_DUPLICATION_MODE
DXC_FULL_CONTROL_MODE,
DXC_AUTO_PARK_MODE,
DXC_DUPLICATION_MODE,
DXC_SCALED_DUPLICATION_MODE
};
extern DualXMode dual_x_carriage_mode;
@ -327,6 +328,8 @@ void homeaxis(const AxisEnum axis);
extern millis_t delayed_move_time; // used in mode 1
extern int16_t duplicate_extruder_temp_offset; // used in mode 2 & 3
FORCE_INLINE bool dxc_is_duplicating() { return dual_x_carriage_mode >= DXC_DUPLICATION_MODE; }
float x_home_pos(const int extruder);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }

2
Marlin/src/module/stepper.cpp
View file

@ -251,7 +251,7 @@ int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 };
#define X_APPLY_DIR(v,ALWAYS) \
if (extruder_duplication_enabled || ALWAYS) { \
X_DIR_WRITE(v); \
X2_DIR_WRITE(bool(v)); \
X2_DIR_WRITE(v); \
} \
else { \
if (movement_extruder()) X2_DIR_WRITE(v); else X_DIR_WRITE(v); \

5
Marlin/src/module/stepper.h
View file

@ -472,13 +472,10 @@ class Stepper {
#endif
}
private:
// Set direction bits for all steppers
static void set_directions();
// Allow reset_stepper_drivers to access private set_directions
friend void reset_stepper_drivers();
private:
// Set the current position in steps
static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e);

15
Marlin/src/module/stepper_indirection.h
View file

@ -562,9 +562,18 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#elif E_STEPPERS > 1
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } else if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } \
else if ((E) == 0) { E0_STEP_WRITE(V); } \
else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } \
else if ((E) == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } \
else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } \
else if ((E) == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } \
else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#else
#define E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)

7
Marlin/src/module/tool_change.cpp
View file

@ -366,6 +366,8 @@ inline void invalid_extruder_error(const uint8_t e) {
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE: SERIAL_ECHOLNPGM("DXC_FULL_CONTROL_MODE"); break;
case DXC_AUTO_PARK_MODE: SERIAL_ECHOLNPGM("DXC_AUTO_PARK_MODE"); break;
case DXC_DUPLICATION_MODE: SERIAL_ECHOLNPGM("DXC_DUPLICATION_MODE"); break;
case DXC_SCALED_DUPLICATION_MODE: SERIAL_ECHOLNPGM("DXC_SCALED_DUPLICATION_MODE"); break;
}
}
#endif
@ -455,9 +457,8 @@ inline void invalid_extruder_error(const uint8_t e) {
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
planner.synchronize();
#if ENABLED(DUAL_X_CARRIAGE)
// Only T0 allowed in DXC_DUPLICATION_MODE
if (tmp_extruder != 0 && dual_x_carriage_mode == DXC_DUPLICATION_MODE)
#if ENABLED(DUAL_X_CARRIAGE) // Only T0 allowed if the Printer is in DXC_DUPLICATION_MODE or DXC_SCALED_DUPLICATION_MODE
if (tmp_extruder != 0 && dxc_is_duplicating())
return invalid_extruder_error(tmp_extruder);
#endif

22
Marlin/src/pins/pins_FORMBOT_TREX2.h
View file

@ -28,8 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#if E_STEPPERS > 3 || HOTENDS > 3
#error "Formbot supports up to 3 hotends / E-steppers. Comment this line to keep going."
#if E_STEPPERS > 2 || HOTENDS > 2
#error "Formbot supports up to 2 hotends / E-steppers. Comment this line to keep going."
#endif
#define DEFAULT_MACHINE_NAME "Formbot"
@ -143,17 +143,15 @@
#define HEATER_BED_PIN 58
#define FAN_PIN 9
#define FAN1_PIN 4
//#define FAN1_PIN 4
#if DISABLED(ICSP_PORT_SWITCHES)
#define FIL_RUNOUT_PIN 22
#define FIL_RUNOUT2_PIN 21
#else
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_PIN 52
#define FIL_RUNOUT2_PIN 50
#endif
//#define FIL_RUNOUT_PIN 22
//#define FIL_RUNOUT2_PIN 21
#elif ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_PIN 52
#define FIL_RUNOUT2_PIN 50
#endif
//
@ -162,8 +160,8 @@
#define CASE_LIGHT_PIN 8
#define SDSS 53
#ifndef ROXYs_TRex
#define LED_PIN 13
#endif
#define LED_PIN 13 // The Formbot v 1 board has almost no unassigned pins on it. The Board's LED
#endif // is a good place to get a signal to control the Max7219 LED Matrix.
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input

18
Marlin/src/pins/pins_FORMBOT_TREX3.h
View file

@ -28,8 +28,8 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#if E_STEPPERS > 3 || HOTENDS > 3
#error "Formbot supports up to 3 hotends / E-steppers. Comment this line to keep going."
#if E_STEPPERS > 2 || HOTENDS > 2
#error "Formbot supports up to 2 hotends / E-steppers. Comment this line to keep going."
#endif
#define DEFAULT_MACHINE_NAME "Formbot"
@ -143,18 +143,10 @@
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#define FAN1_PIN 4
//#define FAN1_PIN 4
#if DISABLED(ICSP_PORT_SWITCHES)
#define FIL_RUNOUT_PIN 22
#define FIL_RUNOUT2_PIN 21
#else
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_PIN 52
#define FIL_RUNOUT2_PIN 50
#endif
#endif
#define FIL_RUNOUT_PIN 23
#define FIL_RUNOUT2_PIN 21
//
// Misc. Functions