Merge branch 'tm2-utf-minus-kanji' into tm-utf-minus-kanji
Conflicts: Marlin/ultralcd_implementation_hitachi_HD44780.h Cleaned!
This commit is contained in:
AnHardt
commit
08856d9615
|
|
@ -225,6 +225,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -2562,13 +2562,13 @@ inline void gcode_M17() {
|
|||
*/
|
||||
inline void gcode_M28() {
|
||||
char* codepos = strchr_pointer + 4;
|
||||
char* starpos = strchr(strchr_pointer + 4, '*');
|
||||
char* starpos = strchr(codepos, '*');
|
||||
if (starpos) {
|
||||
char* npos = strchr(cmdbuffer[bufindr], 'N');
|
||||
strchr_pointer = strchr(npos, ' ') + 1;
|
||||
*(starpos) = '\0';
|
||||
}
|
||||
card.openFile(strchr_pointer + 4, false);
|
||||
card.openFile(codepos, false);
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -171,9 +171,9 @@ static inline uint8_t FAT_SECOND(uint16_t fatTime) {
|
|||
return 2*(fatTime & 0X1F);
|
||||
}
|
||||
/** Default date for file timestamps is 1 Jan 2000 */
|
||||
uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | BIT(5) | 1;
|
||||
uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
|
||||
/** Default time for file timestamp is 1 am */
|
||||
uint16_t const FAT_DEFAULT_TIME = BIT(11);
|
||||
uint16_t const FAT_DEFAULT_TIME = (1 << 11);
|
||||
//------------------------------------------------------------------------------
|
||||
/**
|
||||
* \class SdBaseFile
|
||||
|
|
|
|||
|
|
@ -504,7 +504,6 @@ void CardReader::printingHasFinished() {
|
|||
startFileprint();
|
||||
}
|
||||
else {
|
||||
quickStop();
|
||||
file.close();
|
||||
sdprinting = false;
|
||||
if (SD_FINISHED_STEPPERRELEASE) {
|
||||
|
|
|
|||
|
|
@ -234,6 +234,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -74,12 +74,9 @@
|
|||
#endif
|
||||
#endif // SIMULATE_ROMFONT
|
||||
|
||||
#define FONT_STATUSMENU_NAME FONT_MENU_NAME
|
||||
|
||||
#define FONT_STATUSMENU 1
|
||||
#define FONT_MENU 1
|
||||
#define FONT_SPECIAL 2
|
||||
#define FONT_MENU_EDIT 3
|
||||
#define FONT_MENU 4
|
||||
|
||||
// DOGM parameters (size in pixels)
|
||||
#define DOG_CHAR_WIDTH 6
|
||||
|
|
@ -137,7 +134,6 @@ char currentfont = 0;
|
|||
|
||||
static void lcd_setFont(char font_nr) {
|
||||
switch(font_nr) {
|
||||
case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break;
|
||||
case FONT_MENU : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break;
|
||||
case FONT_SPECIAL : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break;
|
||||
case FONT_MENU_EDIT : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break;
|
||||
|
|
@ -218,7 +214,7 @@ static void lcd_implementation_init()
|
|||
u8g.drawStr(txt1X, u8g.getHeight() - DOG_CHAR_HEIGHT*3/2, STRING_SPLASH_LINE1);
|
||||
u8g.drawStr(txt2X, u8g.getHeight() - DOG_CHAR_HEIGHT*1/2, STRING_SPLASH_LINE2);
|
||||
#endif
|
||||
} while(u8g.nextPage());
|
||||
} while (u8g.nextPage());
|
||||
}
|
||||
|
||||
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
|
||||
|
|
@ -227,7 +223,7 @@ static void _draw_heater_status(int x, int heater) {
|
|||
bool isBed = heater < 0;
|
||||
int y = 17 + (isBed ? 1 : 0);
|
||||
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
lcd_setFont(FONT_MENU);
|
||||
u8g.setPrintPos(x,7);
|
||||
lcd_print(itostr3(int((heater >= 0 ? degTargetHotend(heater) : degTargetBed()) + 0.5)));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
|
|
@ -252,7 +248,8 @@ static void lcd_implementation_status_screen() {
|
|||
|
||||
// Symbols menu graphics, animated fan
|
||||
u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
|
||||
|
||||
lcd_setFont(FONT_MENU);
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
// SD Card Symbol
|
||||
u8g.drawBox(42,42,8,7);
|
||||
|
|
@ -264,14 +261,12 @@ static void lcd_implementation_status_screen() {
|
|||
u8g.drawFrame(54,49,73,4);
|
||||
|
||||
// SD Card Progress bar and clock
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
|
||||
if (IS_SD_PRINTING) {
|
||||
// Progress bar solid part
|
||||
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
|
||||
}
|
||||
|
||||
u8g.setPrintPos(80,47);
|
||||
u8g.setPrintPos(80,48);
|
||||
if (starttime != 0) {
|
||||
uint16_t time = (millis() - starttime) / 60000;
|
||||
lcd_print(itostr2(time/60));
|
||||
|
|
@ -290,11 +285,11 @@ static void lcd_implementation_status_screen() {
|
|||
if (EXTRUDERS < 4) _draw_heater_status(81, -1);
|
||||
|
||||
// Fan
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
u8g.setPrintPos(104,27);
|
||||
#if defined(FAN_PIN) && FAN_PIN > -1
|
||||
int per = ((fanSpeed + 1) * 100) / 256;
|
||||
if (per) {
|
||||
|
||||
lcd_print(itostr3(per));
|
||||
lcd_print('%');
|
||||
}
|
||||
|
|
@ -305,50 +300,38 @@ static void lcd_implementation_status_screen() {
|
|||
}
|
||||
|
||||
// X, Y, Z-Coordinates
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
u8g.drawBox(0,29,128,10);
|
||||
#define XYZ_BASELINE 38
|
||||
u8g.drawBox(0,30,128,9);
|
||||
u8g.setColorIndex(0); // white on black
|
||||
u8g.setPrintPos(2,37);
|
||||
u8g.setPrintPos(2,XYZ_BASELINE);
|
||||
lcd_print('X');
|
||||
u8g.drawPixel(8,33);
|
||||
u8g.drawPixel(8,35);
|
||||
u8g.setPrintPos(10,37);
|
||||
u8g.drawPixel(8,XYZ_BASELINE - 5);
|
||||
u8g.drawPixel(8,XYZ_BASELINE - 3);
|
||||
u8g.setPrintPos(10,XYZ_BASELINE);
|
||||
lcd_print(ftostr31ns(current_position[X_AXIS]));
|
||||
u8g.setPrintPos(43,37);
|
||||
u8g.setPrintPos(43,XYZ_BASELINE);
|
||||
lcd_print('Y');
|
||||
u8g.drawPixel(49,33);
|
||||
u8g.drawPixel(49,35);
|
||||
u8g.setPrintPos(51,37);
|
||||
u8g.drawPixel(49,XYZ_BASELINE - 5);
|
||||
u8g.drawPixel(49,XYZ_BASELINE - 3);
|
||||
u8g.setPrintPos(51,XYZ_BASELINE);
|
||||
lcd_print(ftostr31ns(current_position[Y_AXIS]));
|
||||
u8g.setPrintPos(83,37);
|
||||
u8g.setPrintPos(83,XYZ_BASELINE);
|
||||
lcd_print('Z');
|
||||
u8g.drawPixel(89,33);
|
||||
u8g.drawPixel(89,35);
|
||||
u8g.setPrintPos(91,37);
|
||||
u8g.drawPixel(89,XYZ_BASELINE - 5);
|
||||
u8g.drawPixel(89,XYZ_BASELINE - 3);
|
||||
u8g.setPrintPos(91,XYZ_BASELINE);
|
||||
lcd_print(ftostr31(current_position[Z_AXIS]));
|
||||
u8g.setColorIndex(1); // black on white
|
||||
|
||||
// Feedrate
|
||||
lcd_setFont(FONT_MENU);
|
||||
u8g.setPrintPos(3,49);
|
||||
lcd_print(LCD_STR_FEEDRATE[0]);
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
u8g.setPrintPos(12,48);
|
||||
u8g.setPrintPos(12,49);
|
||||
lcd_print(itostr3(feedmultiply));
|
||||
lcd_print('%');
|
||||
|
||||
// Status line
|
||||
/* The new fonts are small enough
|
||||
#ifndef MAPPER_C2C3
|
||||
lcd_setFont(FONT_MENU);
|
||||
#else
|
||||
lcd_setFont(FONT_STATUSMENU);
|
||||
#endif
|
||||
*/
|
||||
lcd_setFont(FONT_MENU);
|
||||
|
||||
u8g.setPrintPos(0,61);
|
||||
|
||||
u8g.setPrintPos(0,63);
|
||||
#ifndef FILAMENT_LCD_DISPLAY
|
||||
lcd_print(lcd_status_message);
|
||||
#else
|
||||
|
|
@ -365,10 +348,10 @@ static void lcd_implementation_status_screen() {
|
|||
#endif
|
||||
}
|
||||
|
||||
static void lcd_implementation_mark_as_selected(uint8_t row, char pr_char) {
|
||||
if ((pr_char == '>') || (pr_char == LCD_STR_UPLEVEL[0] )) {
|
||||
static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
|
||||
if (isSelected) {
|
||||
u8g.setColorIndex(1); // black on white
|
||||
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
|
||||
u8g.drawBox(0, row * DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
|
||||
u8g.setColorIndex(0); // following text must be white on black
|
||||
}
|
||||
else {
|
||||
|
|
@ -377,96 +360,78 @@ static void lcd_implementation_mark_as_selected(uint8_t row, char pr_char) {
|
|||
u8g.setPrintPos(START_ROW * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
||||
}
|
||||
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
|
||||
lcd_implementation_mark_as_selected(row, pre_char);
|
||||
lcd_implementation_mark_as_selected(row, isSelected);
|
||||
|
||||
while((c = pgm_read_byte(pstr))) {
|
||||
while (c = pgm_read_byte(pstr)) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
while(n--) lcd_print(' ');
|
||||
while (n--) lcd_print(' ');
|
||||
lcd_print(post_char);
|
||||
lcd_print(' ');
|
||||
}
|
||||
|
||||
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
|
||||
static void _drawmenu_setting_edit_generic(bool isSelected, uint8_t row, const char* pstr, const char* data, bool pgm) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2 - (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
|
||||
|
||||
lcd_implementation_mark_as_selected(row, pre_char);
|
||||
lcd_implementation_mark_as_selected(row, isSelected);
|
||||
|
||||
while( (c = pgm_read_byte(pstr))) {
|
||||
while (c = pgm_read_byte(pstr)) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
lcd_print(':');
|
||||
while(n--) lcd_print(' ');
|
||||
while (n--) lcd_print(' ');
|
||||
if (pgm) { lcd_printPGM(data); } else { lcd_print((char *)data); }
|
||||
}
|
||||
|
||||
#define lcd_implementation_drawmenu_setting_edit_generic(row, pstr, pre_char, data) _drawmenu_setting_edit_generic(row, pstr, pre_char, data, false)
|
||||
#define lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, pre_char, data) _drawmenu_setting_edit_generic(row, pstr, pre_char, data, true)
|
||||
#define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
|
||||
#define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)
|
||||
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
//Add version for callback functions
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value) {
|
||||
uint8_t rows = 1;
|
||||
uint8_t lcd_width = LCD_WIDTH;
|
||||
uint8_t char_width = DOG_CHAR_WIDTH;
|
||||
uint8_t lcd_width = LCD_WIDTH, char_width = DOG_CHAR_WIDTH;
|
||||
uint8_t vallen = lcd_strlen(value);
|
||||
|
||||
#ifdef USE_BIG_EDIT_FONT
|
||||
if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
|
||||
lcd_setFont(FONT_MENU_EDIT);
|
||||
lcd_width = LCD_WIDTH_EDIT + 1;
|
||||
char_width = DOG_CHAR_WIDTH_EDIT;
|
||||
if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - lcd_strlen(value)) rows = 2;
|
||||
if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - vallen) rows = 2;
|
||||
}
|
||||
else {
|
||||
lcd_setFont(FONT_MENU);
|
||||
}
|
||||
#endif
|
||||
|
||||
if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - lcd_strlen(value)) rows = 2;
|
||||
if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - vallen) rows = 2;
|
||||
|
||||
const float kHalfChar = DOG_CHAR_HEIGHT_EDIT / 2;
|
||||
float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
|
||||
|
|
@ -474,42 +439,36 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
|
|||
u8g.setPrintPos(0, rowHeight + kHalfChar);
|
||||
lcd_printPGM(pstr);
|
||||
lcd_print(':');
|
||||
u8g.setPrintPos((lcd_width-1-lcd_strlen(value)) * char_width, rows * rowHeight + kHalfChar);
|
||||
u8g.setPrintPos((lcd_width - 1 - vallen) * char_width, rows * rowHeight + kHalfChar);
|
||||
lcd_print(value);
|
||||
}
|
||||
|
||||
static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
|
||||
static void _drawmenu_sd(bool isSelected, uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
|
||||
if (longFilename[0] != '\0') {
|
||||
if (longFilename[0]) {
|
||||
filename = longFilename;
|
||||
longFilename[n] = '\0';
|
||||
}
|
||||
|
||||
lcd_implementation_mark_as_selected(row, ((isSelected) ? '>' : ' '));
|
||||
lcd_implementation_mark_as_selected(row, isSelected);
|
||||
|
||||
if (isDir) lcd_print(LCD_STR_FOLDER[0]);
|
||||
while((c = *filename) != '\0') {
|
||||
while (c = *filename) {
|
||||
n -= lcd_print(c);
|
||||
filename++;
|
||||
}
|
||||
while(n--) lcd_print(' ');
|
||||
while (n--) lcd_print(' ');
|
||||
}
|
||||
|
||||
#define lcd_implementation_drawmenu_sdfile_selected(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, false, true)
|
||||
#define lcd_implementation_drawmenu_sdfile(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, false, false)
|
||||
#define lcd_implementation_drawmenu_sddirectory_selected(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, true, true)
|
||||
#define lcd_implementation_drawmenu_sddirectory(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, true, false)
|
||||
#define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)
|
||||
#define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true)
|
||||
|
||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
#define lcd_implementation_drawmenu_back(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
||||
|
||||
static void lcd_implementation_quick_feedback() {
|
||||
#if BEEPER > -1
|
||||
|
|
|
|||
|
|
@ -215,6 +215,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
// Felix Foil Heater
|
||||
#define DEFAULT_bedKp 103.37
|
||||
|
|
|
|||
|
|
@ -215,6 +215,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
// Felix Foil Heater
|
||||
#define DEFAULT_bedKp 103.37
|
||||
|
|
|
|||
|
|
@ -231,6 +231,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -254,6 +254,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -258,6 +258,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -259,6 +259,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -228,6 +228,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// to increase the heat up rate. However, if changed, user must be aware of the safety concerns
|
||||
// of drawing too much current from the power supply.
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
|
|||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@ block_t *current_block; // A pointer to the block currently being traced
|
|||
|
||||
// Variables used by The Stepper Driver Interrupt
|
||||
static unsigned char out_bits; // The next stepping-bits to be output
|
||||
static unsigned int cleaning_buffer_counter;
|
||||
|
||||
// Counter variables for the bresenham line tracer
|
||||
static long counter_x, counter_y, counter_z, counter_e;
|
||||
|
|
@ -346,6 +347,17 @@ FORCE_INLINE void trapezoid_generator_reset() {
|
|||
// "The Stepper Driver Interrupt" - This timer interrupt is the workhorse.
|
||||
// It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately.
|
||||
ISR(TIMER1_COMPA_vect) {
|
||||
|
||||
if(cleaning_buffer_counter)
|
||||
{
|
||||
current_block = NULL;
|
||||
plan_discard_current_block();
|
||||
if ((cleaning_buffer_counter == 1) && (SD_FINISHED_STEPPERRELEASE)) enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
|
||||
cleaning_buffer_counter--;
|
||||
OCR1A = 200;
|
||||
return;
|
||||
}
|
||||
|
||||
// If there is no current block, attempt to pop one from the buffer
|
||||
if (!current_block) {
|
||||
// Anything in the buffer?
|
||||
|
|
@ -972,6 +984,7 @@ void finishAndDisableSteppers() {
|
|||
}
|
||||
|
||||
void quickStop() {
|
||||
cleaning_buffer_counter = 5000;
|
||||
DISABLE_STEPPER_DRIVER_INTERRUPT();
|
||||
while (blocks_queued()) plan_discard_current_block();
|
||||
current_block = NULL;
|
||||
|
|
|
|||
|
|
@ -636,6 +636,21 @@ float get_pid_output(int e) {
|
|||
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
|
||||
#endif // PID_OPENLOOP
|
||||
|
||||
#ifdef PID_BED_DEBUG
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(" PID_BED_DEBUG ");
|
||||
SERIAL_ECHO(": Input ");
|
||||
SERIAL_ECHO(current_temperature_bed);
|
||||
SERIAL_ECHO(" Output ");
|
||||
SERIAL_ECHO(pid_output);
|
||||
SERIAL_ECHO(" pTerm ");
|
||||
SERIAL_ECHO(pTerm_bed);
|
||||
SERIAL_ECHO(" iTerm ");
|
||||
SERIAL_ECHO(iTerm_bed);
|
||||
SERIAL_ECHO(" dTerm ");
|
||||
SERIAL_ECHOLN(dTerm_bed);
|
||||
#endif //PID_BED_DEBUG
|
||||
|
||||
return pid_output;
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -118,64 +118,84 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
|
|||
|
||||
|
||||
/* Helper macros for menus */
|
||||
|
||||
/**
|
||||
* START_MENU generates the init code for a menu function
|
||||
*/
|
||||
#define START_MENU() do { \
|
||||
encoderRateMultiplierEnabled = false; \
|
||||
if (encoderPosition > 0x8000) encoderPosition = 0; \
|
||||
if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\
|
||||
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
|
||||
bool wasClicked = LCD_CLICKED;\
|
||||
for(uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
|
||||
_menuItemNr = 0;
|
||||
encoderRateMultiplierEnabled = false; \
|
||||
if (encoderPosition > 0x8000) encoderPosition = 0; \
|
||||
uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
if (encoderLine < currentMenuViewOffset) currentMenuViewOffset = encoderLine; \
|
||||
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
|
||||
bool wasClicked = LCD_CLICKED, itemSelected; \
|
||||
if (wasClicked) lcd_quick_feedback(); \
|
||||
for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
|
||||
_menuItemNr = 0;
|
||||
|
||||
/**
|
||||
* MENU_ITEM generates draw & handler code for a menu item, potentially calling:
|
||||
*
|
||||
* lcd_implementation_drawmenu_[type](sel, row, label, arg3...)
|
||||
* menu_action_[type](arg3...)
|
||||
*
|
||||
* Examples:
|
||||
* MENU_ITEM(back, MSG_WATCH, lcd_status_screen)
|
||||
* lcd_implementation_drawmenu_back(sel, row, PSTR(MSG_WATCH), lcd_status_screen)
|
||||
* menu_action_back(lcd_status_screen)
|
||||
*
|
||||
* MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause)
|
||||
* lcd_implementation_drawmenu_function(sel, row, PSTR(MSG_PAUSE_PRINT), lcd_sdcard_pause)
|
||||
* menu_action_function(lcd_sdcard_pause)
|
||||
*
|
||||
* MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999)
|
||||
* MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedmultiply, 10, 999)
|
||||
* lcd_implementation_drawmenu_setting_edit_int3(sel, row, PSTR(MSG_SPEED), PSTR(MSG_SPEED), &feedmultiply, 10, 999)
|
||||
* menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedmultiply, 10, 999)
|
||||
*
|
||||
*/
|
||||
#define MENU_ITEM(type, label, args...) do { \
|
||||
if (_menuItemNr == _lineNr) { \
|
||||
if (lcdDrawUpdate) { \
|
||||
const char* _label_pstr = PSTR(label); \
|
||||
if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
|
||||
lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
|
||||
}else{\
|
||||
lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
|
||||
}\
|
||||
}\
|
||||
if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
|
||||
lcd_quick_feedback(); \
|
||||
menu_action_ ## type ( args ); \
|
||||
return;\
|
||||
}\
|
||||
}\
|
||||
_menuItemNr++;\
|
||||
if (_menuItemNr == _lineNr) { \
|
||||
itemSelected = encoderLine == _menuItemNr; \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_ ## type(itemSelected, _drawLineNr, PSTR(label), ## args); \
|
||||
if (wasClicked && itemSelected) { \
|
||||
menu_action_ ## type(args); \
|
||||
return; \
|
||||
} \
|
||||
} \
|
||||
_menuItemNr++; \
|
||||
} while(0)
|
||||
|
||||
#ifdef ENCODER_RATE_MULTIPLIER
|
||||
/**
|
||||
* MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item
|
||||
*/
|
||||
#define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
|
||||
if (_menuItemNr == _lineNr) { \
|
||||
if (lcdDrawUpdate) { \
|
||||
const char* _label_pstr = PSTR(label); \
|
||||
if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
|
||||
lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
|
||||
} \
|
||||
else { \
|
||||
lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
|
||||
} \
|
||||
} \
|
||||
if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
|
||||
lcd_quick_feedback(); \
|
||||
itemSelected = encoderLine == _menuItemNr; \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_ ## type(itemSelected, _drawLineNr, PSTR(label), ## args); \
|
||||
if (wasClicked && itemSelected) { \
|
||||
encoderRateMultiplierEnabled = true; \
|
||||
lastEncoderMovementMillis = 0; \
|
||||
menu_action_ ## type ( args ); \
|
||||
menu_action_ ## type(args); \
|
||||
return; \
|
||||
} \
|
||||
} \
|
||||
_menuItemNr++; \
|
||||
} while(0)
|
||||
#endif //ENCODER_RATE_MULTIPLIER
|
||||
|
||||
#define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0)
|
||||
#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
|
||||
#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
|
||||
#ifdef ENCODER_RATE_MULTIPLIER
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
|
||||
#else //!ENCODER_RATE_MULTIPLIER
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
|
||||
#endif //!ENCODER_RATE_MULTIPLIER
|
||||
#define END_MENU() \
|
||||
if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \
|
||||
|
|
@ -349,16 +369,11 @@ static void lcd_sdcard_pause() { card.pauseSDPrint(); }
|
|||
static void lcd_sdcard_resume() { card.startFileprint(); }
|
||||
|
||||
static void lcd_sdcard_stop() {
|
||||
quickStop();
|
||||
card.sdprinting = false;
|
||||
card.closefile();
|
||||
quickStop();
|
||||
if (SD_FINISHED_STEPPERRELEASE) {
|
||||
enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
|
||||
}
|
||||
autotempShutdown();
|
||||
|
||||
cancel_heatup = true;
|
||||
|
||||
lcd_setstatus(MSG_PRINT_ABORTED);
|
||||
}
|
||||
|
||||
|
|
@ -463,9 +478,9 @@ static void lcd_tune_menu() {
|
|||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
|
||||
#endif
|
||||
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
|
||||
MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
|
||||
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F0, &extruder_multiply[0], 10, 999);
|
||||
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
|
||||
MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
|
||||
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F0, &extruder_multiply[0], 10, 999);
|
||||
#if TEMP_SENSOR_1 != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F1, &extruder_multiply[1], 10, 999);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -413,9 +413,8 @@ char lcd_printPGM(const char* str) {
|
|||
}
|
||||
|
||||
char lcd_print(char* str) {
|
||||
char c;
|
||||
char c, n = 0;;
|
||||
unsigned char i = 0;
|
||||
char n = 0;
|
||||
while((c = str[i++])) {
|
||||
n += charset_mapper(c);
|
||||
}
|
||||
|
|
@ -623,200 +622,104 @@ static void lcd_implementation_status_screen()
|
|||
lcd_print(lcd_status_message);
|
||||
}
|
||||
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1;
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
||||
{
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
while(n--) {
|
||||
lcd.print(' ');
|
||||
}
|
||||
lcd.print(post_char);
|
||||
lcd.print(' ');
|
||||
static void lcd_implementation_drawmenu_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2);
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(sel ? pre_char : ' ');
|
||||
while ((c = pgm_read_byte(pstr)) && n > 0) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
while(n--) lcd.print(' ');
|
||||
lcd.print(post_char);
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd_print(data);
|
||||
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char* data) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2) - lcd_strlen(data);
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(sel ? pre_char : ' ');
|
||||
while ((c = pgm_read_byte(pstr)) && n > 0) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
lcd.print(':');
|
||||
while (n--) lcd.print(' ');
|
||||
lcd_print(data);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen_P(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen_P(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd_printPGM(data);
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(bool sel, uint8_t row, const char* pstr, char pre_char, const char* data) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2) - lcd_strlen_P(data);
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(sel ? pre_char : ' ');
|
||||
while ((c = pgm_read_byte(pstr)) && n > 0) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
lcd.print(':');
|
||||
while (n--) lcd.print(' ');
|
||||
lcd_printPGM(data);
|
||||
}
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
//Add version for callback functions
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value) {
|
||||
lcd.setCursor(1, 1);
|
||||
lcd_printPGM(pstr);
|
||||
lcd.print(':');
|
||||
lcd.setCursor(LCD_WIDTH - (LCD_WIDTH < 20 ? 0 : 1) - lcd_strlen(value), 1);
|
||||
lcd_print(value);
|
||||
}
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||
{
|
||||
lcd.setCursor(1, 1);
|
||||
lcd_printPGM(pstr);
|
||||
lcd.print(':');
|
||||
#if LCD_WIDTH < 20
|
||||
lcd.setCursor(LCD_WIDTH - lcd_strlen(value), 1);
|
||||
#else
|
||||
lcd.setCursor(LCD_WIDTH -1 - lcd_strlen(value), 1);
|
||||
#endif
|
||||
lcd_print(value);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while( ((c = *filename) != '\0') && (n>0) )
|
||||
{
|
||||
n -= lcd_print(c);
|
||||
filename++;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while( ((c = *filename) != '\0') && (n>0) )
|
||||
{
|
||||
n -= lcd_print(c);
|
||||
filename++;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) {
|
||||
static void lcd_implementation_drawmenu_sd(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename, uint8_t concat) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
uint8_t n = LCD_WIDTH - concat;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0') {
|
||||
lcd.print(sel ? '>' : ' ');
|
||||
if (longFilename[0]) {
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
longFilename[n] = '\0';
|
||||
}
|
||||
while( ((c = *filename) != '\0') && (n>0) ) {
|
||||
while ((c = *filename) && n > 0) {
|
||||
n -= lcd_print(c);
|
||||
filename++;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
while (n--) lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0') {
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
}
|
||||
while( ((c = *filename) != '\0') && (n>0) ) {
|
||||
n -= lcd_print(c);
|
||||
filename++;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
|
||||
static void lcd_implementation_drawmenu_sdfile(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename) {
|
||||
lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 1);
|
||||
}
|
||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
|
||||
static void lcd_implementation_drawmenu_sddirectory(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename) {
|
||||
lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2);
|
||||
}
|
||||
|
||||
#define lcd_implementation_drawmenu_back(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
|
||||
|
||||
static void lcd_implementation_quick_feedback()
|
||||
{
|
||||
|
|
|
|||
Loading…
Reference in a new issue