Make EEPROM storage consistent
Update ConfigurationStore to always write dummy values for disabled options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM version to “V15.” Also fixes a buffer overrun with axis_scaling in Config_ResetDefault.
This commit is contained in:
Scott Lahteine
parent
34377ee512
commit
093fedfde8
|
|
@ -1,33 +1,92 @@
|
|||
/**
|
||||
* ConfigurationStore.cpp
|
||||
*
|
||||
* Configuration and EEPROM storage
|
||||
*
|
||||
* V15 EEPROM Layout:
|
||||
*
|
||||
* ver
|
||||
* axis_steps_per_unit (x4)
|
||||
* max_feedrate (x4)
|
||||
* max_acceleration_units_per_sq_second (x4)
|
||||
* acceleration
|
||||
* retract_acceleration
|
||||
* minimumfeedrate
|
||||
* mintravelfeedrate
|
||||
* minsegmenttime
|
||||
* max_xy_jerk
|
||||
* max_z_jerk
|
||||
* max_e_jerk
|
||||
* add_homing (x3)
|
||||
*
|
||||
* DELTA:
|
||||
* endstop_adj (x3)
|
||||
* delta_radius
|
||||
* delta_diagonal_rod
|
||||
* delta_segments_per_second
|
||||
*
|
||||
* ULTIPANEL:
|
||||
* plaPreheatHotendTemp
|
||||
* plaPreheatHPBTemp
|
||||
* plaPreheatFanSpeed
|
||||
* absPreheatHotendTemp
|
||||
* absPreheatHPBTemp
|
||||
* absPreheatFanSpeed
|
||||
* zprobe_zoffset
|
||||
*
|
||||
* PIDTEMP:
|
||||
* Kp[0], Ki[0], Kd[0], Kc[0]
|
||||
* Kp[1], Ki[1], Kd[1], Kc[1]
|
||||
* Kp[2], Ki[2], Kd[2], Kc[2]
|
||||
* Kp[3], Ki[3], Kd[3], Kc[3]
|
||||
*
|
||||
* DOGLCD:
|
||||
* lcd_contrast
|
||||
*
|
||||
* SCARA:
|
||||
* axis_scaling (x3)
|
||||
*
|
||||
* FWRETRACT:
|
||||
* autoretract_enabled
|
||||
* retract_length
|
||||
* retract_length_swap
|
||||
* retract_feedrate
|
||||
* retract_zlift
|
||||
* retract_recover_length
|
||||
* retract_recover_length_swap
|
||||
* retract_recover_feedrate
|
||||
*
|
||||
* volumetric_enabled
|
||||
*
|
||||
* filament_size (x4)
|
||||
*
|
||||
*/
|
||||
#include "Marlin.h"
|
||||
#include "planner.h"
|
||||
#include "temperature.h"
|
||||
#include "ultralcd.h"
|
||||
#include "ConfigurationStore.h"
|
||||
|
||||
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size)
|
||||
{
|
||||
do
|
||||
{
|
||||
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
|
||||
do {
|
||||
eeprom_write_byte((unsigned char*)pos, *value);
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
}
|
||||
#define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value))
|
||||
void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
|
||||
{
|
||||
do
|
||||
{
|
||||
void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
|
||||
do {
|
||||
*value = eeprom_read_byte((unsigned char*)pos);
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
}
|
||||
#define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value))
|
||||
#define EEPROM_READ_VAR(pos, value) _EEPROM_readData(pos, (uint8_t*)&value, sizeof(value))
|
||||
|
||||
//======================================================================================
|
||||
|
||||
|
||||
|
||||
#define DUMMY_PID_VALUE 3000.0f
|
||||
|
||||
#define EEPROM_OFFSET 100
|
||||
|
||||
|
|
@ -38,11 +97,12 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
|
|||
// wrong data being written to the variables.
|
||||
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
|
||||
|
||||
#define EEPROM_VERSION "V14"
|
||||
#define EEPROM_VERSION "V15"
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
void Config_StoreSettings()
|
||||
{
|
||||
|
||||
void Config_StoreSettings() {
|
||||
float dummy = 0.0f;
|
||||
char ver[4] = "000";
|
||||
int i = EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(i, ver); // invalidate data first
|
||||
|
|
@ -58,16 +118,22 @@ void Config_StoreSettings()
|
|||
EEPROM_WRITE_VAR(i, max_z_jerk);
|
||||
EEPROM_WRITE_VAR(i, max_e_jerk);
|
||||
EEPROM_WRITE_VAR(i, add_homing);
|
||||
|
||||
#ifdef DELTA
|
||||
EEPROM_WRITE_VAR(i,endstop_adj);
|
||||
EEPROM_WRITE_VAR(i,delta_radius);
|
||||
EEPROM_WRITE_VAR(i,delta_diagonal_rod);
|
||||
EEPROM_WRITE_VAR(i,delta_segments_per_second);
|
||||
#endif//DELTA
|
||||
EEPROM_WRITE_VAR(i, endstop_adj); // 3 floats
|
||||
EEPROM_WRITE_VAR(i, delta_radius); // 1 float
|
||||
EEPROM_WRITE_VAR(i, delta_diagonal_rod); // 1 float
|
||||
EEPROM_WRITE_VAR(i, delta_segments_per_second); // 1 float
|
||||
#else
|
||||
dummy = 0.0f;
|
||||
for (int q=6; q--;) EEPROM_WRITE_VAR(i, dummy);
|
||||
#endif
|
||||
|
||||
#ifndef ULTIPANEL
|
||||
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
|
||||
int absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
#endif//ULTIPANEL
|
||||
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED,
|
||||
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
#endif // !ULTIPANEL
|
||||
|
||||
EEPROM_WRITE_VAR(i, plaPreheatHotendTemp);
|
||||
EEPROM_WRITE_VAR(i, plaPreheatHPBTemp);
|
||||
EEPROM_WRITE_VAR(i, plaPreheatFanSpeed);
|
||||
|
|
@ -75,250 +141,100 @@ void Config_StoreSettings()
|
|||
EEPROM_WRITE_VAR(i, absPreheatHPBTemp);
|
||||
EEPROM_WRITE_VAR(i, absPreheatFanSpeed);
|
||||
EEPROM_WRITE_VAR(i, zprobe_zoffset);
|
||||
|
||||
for (int e = 0; e < 4; e++) {
|
||||
|
||||
#ifdef PIDTEMP
|
||||
float dummy = 0.0f;
|
||||
for (int e = 0; e < 4; e++)
|
||||
{
|
||||
if (e < EXTRUDERS)
|
||||
{
|
||||
if (e < EXTRUDERS) {
|
||||
EEPROM_WRITE_VAR(i, PID_PARAM(Kp, e));
|
||||
EEPROM_WRITE_VAR(i, PID_PARAM(Ki, e));
|
||||
EEPROM_WRITE_VAR(i, PID_PARAM(Kd, e));
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
EEPROM_WRITE_VAR(i, PID_PARAM(Kc, e));
|
||||
#else//PID_ADD_EXTRUSION_RATE
|
||||
#else
|
||||
dummy = 1.0f; // 1.0 = default kc
|
||||
EEPROM_WRITE_VAR(dummmy);
|
||||
#endif//PID_ADD_EXTRUSION_RATE
|
||||
#endif
|
||||
}
|
||||
else
|
||||
else {
|
||||
#else // !PIDTEMP
|
||||
{
|
||||
dummy = 3000.0f;
|
||||
#endif // !PIDTEMP
|
||||
|
||||
dummy = DUMMY_PID_VALUE;
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
dummy = 0.0f;
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
for (int q = 3; q--;) EEPROM_WRITE_VAR(i, dummy);
|
||||
}
|
||||
}
|
||||
#else//PIDTEMP
|
||||
float dummy = 3000.0f;
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
dummy = 0.0f;
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
EEPROM_WRITE_VAR(i,dummy);
|
||||
#endif//PIDTEMP
|
||||
} // Extruders Loop
|
||||
|
||||
#ifndef DOGLCD
|
||||
int lcd_contrast = 32;
|
||||
#endif//DOGLCD
|
||||
#endif
|
||||
EEPROM_WRITE_VAR(i, lcd_contrast);
|
||||
|
||||
#ifdef SCARA
|
||||
EEPROM_WRITE_VAR(i,axis_scaling); // Add scaling for SCARA
|
||||
#endif//SCARA
|
||||
EEPROM_WRITE_VAR(i, axis_scaling); // 3 floats
|
||||
#else
|
||||
dummy = 1.0f;
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
#endif
|
||||
|
||||
#ifdef FWRETRACT
|
||||
EEPROM_WRITE_VAR(i, autoretract_enabled);
|
||||
EEPROM_WRITE_VAR(i, retract_length);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_WRITE_VAR(i, retract_length_swap);
|
||||
#endif//EXTRUDERS > 1
|
||||
#else
|
||||
dummy = 0.0f;
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
#endif
|
||||
EEPROM_WRITE_VAR(i, retract_feedrate);
|
||||
EEPROM_WRITE_VAR(i, retract_zlift);
|
||||
EEPROM_WRITE_VAR(i, retract_recover_length);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_WRITE_VAR(i, retract_recover_length_swap);
|
||||
#endif//EXTRUDERS > 1
|
||||
#else
|
||||
dummy = 0.0f;
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
#endif
|
||||
EEPROM_WRITE_VAR(i, retract_recover_feedrate);
|
||||
#endif // FWRETRACT
|
||||
|
||||
// Save filament sizes
|
||||
EEPROM_WRITE_VAR(i, volumetric_enabled);
|
||||
EEPROM_WRITE_VAR(i, filament_size[0]);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_WRITE_VAR(i, filament_size[1]);
|
||||
#if EXTRUDERS > 2
|
||||
EEPROM_WRITE_VAR(i, filament_size[2]);
|
||||
#if EXTRUDERS > 3
|
||||
EEPROM_WRITE_VAR(i, filament_size[3]);
|
||||
#endif //EXTRUDERS > 3
|
||||
#endif //EXTRUDERS > 2
|
||||
#endif //EXTRUDERS > 1
|
||||
|
||||
// Save filament sizes
|
||||
for (int q = 0; q < 4; q++) {
|
||||
if (q < EXTRUDERS) dummy = filament_size[q];
|
||||
EEPROM_WRITE_VAR(i, dummy);
|
||||
}
|
||||
|
||||
int storageSize = i;
|
||||
|
||||
char ver2[4] = EEPROM_VERSION;
|
||||
i=EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(i,ver2); // validate data
|
||||
int j = EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(j, ver2); // validate data
|
||||
|
||||
// Report storage size
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Settings Stored");
|
||||
SERIAL_ECHOPAIR("Settings Stored (", (unsigned long)i);
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
}
|
||||
#endif //EEPROM_SETTINGS
|
||||
|
||||
void Config_RetrieveSettings() {
|
||||
|
||||
#ifndef DISABLE_M503
|
||||
void Config_PrintSettings()
|
||||
{ // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Steps per unit:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M92 X",axis_steps_per_unit[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y",axis_steps_per_unit[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z",axis_steps_per_unit[Z_AXIS]);
|
||||
SERIAL_ECHOPAIR(" E",axis_steps_per_unit[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
#ifdef SCARA
|
||||
SERIAL_ECHOLNPGM("Scaling factors:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M365 X",axis_scaling[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y",axis_scaling[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z",axis_scaling[Z_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
#endif//SCARA
|
||||
SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M203 X", max_feedrate[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y", max_feedrate[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z", max_feedrate[Z_AXIS]);
|
||||
SERIAL_ECHOPAIR(" E", max_feedrate[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M201 X" ,max_acceleration_units_per_sq_second[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[Z_AXIS] );
|
||||
SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M204 S",acceleration );
|
||||
SERIAL_ECHOPAIR(" T" ,retract_acceleration);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M205 S",minimumfeedrate );
|
||||
SERIAL_ECHOPAIR(" T" ,mintravelfeedrate );
|
||||
SERIAL_ECHOPAIR(" B" ,minsegmenttime );
|
||||
SERIAL_ECHOPAIR(" X" ,max_xy_jerk );
|
||||
SERIAL_ECHOPAIR(" Z" ,max_z_jerk);
|
||||
SERIAL_ECHOPAIR(" E" ,max_e_jerk);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Home offset (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M206 X",add_homing[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y" ,add_homing[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z" ,add_homing[Z_AXIS] );
|
||||
SERIAL_ECHOLN("");
|
||||
#ifdef DELTA
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Endstop adjustement (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M666 X",endstop_adj[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y" ,endstop_adj[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z" ,endstop_adj[Z_AXIS] );
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M665 L",delta_diagonal_rod );
|
||||
SERIAL_ECHOPAIR(" R" ,delta_radius );
|
||||
SERIAL_ECHOPAIR(" S" ,delta_segments_per_second );
|
||||
SERIAL_ECHOLN("");
|
||||
#endif//DELTA
|
||||
#ifdef PIDTEMP
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("PID settings:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp,0)); // for compatibility with hosts, only echos values for E0
|
||||
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
|
||||
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
|
||||
SERIAL_ECHOLN("");
|
||||
#endif//PIDTEMP
|
||||
#ifdef FWRETRACT
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M207 S",retract_length);
|
||||
SERIAL_ECHOPAIR(" F" ,retract_feedrate*60);
|
||||
SERIAL_ECHOPAIR(" Z" ,retract_zlift);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M208 S",retract_recover_length);
|
||||
SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0));
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 1
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Multi-extruder settings:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif//EXTRUDERS > 1
|
||||
#endif//FWRETRACT
|
||||
SERIAL_ECHO_START;
|
||||
if (volumetric_enabled) {
|
||||
SERIAL_ECHOLNPGM("Filament settings:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 1
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]);
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 2
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 3
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif //EXTRUDERS > 3
|
||||
#endif //EXTRUDERS > 2
|
||||
#endif //EXTRUDERS > 1
|
||||
} else {
|
||||
SERIAL_ECHOLNPGM("Filament settings: Disabled");
|
||||
}
|
||||
#ifdef CUSTOM_M_CODES
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Z-Probe Offset (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(" M");
|
||||
SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET);
|
||||
SERIAL_ECHOPAIR(" Z",-zprobe_zoffset);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
}
|
||||
#endif//DISABLE_M503
|
||||
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
void Config_RetrieveSettings()
|
||||
{
|
||||
int i = EEPROM_OFFSET;
|
||||
char stored_ver[4];
|
||||
char ver[4] = EEPROM_VERSION;
|
||||
EEPROM_READ_VAR(i, stored_ver); //read stored version
|
||||
// SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]");
|
||||
if (strncmp(ver,stored_ver,3) == 0)
|
||||
{
|
||||
|
||||
if (strncmp(ver, stored_ver, 3) != 0) {
|
||||
Config_ResetDefault();
|
||||
}
|
||||
else {
|
||||
float dummy = 0;
|
||||
|
||||
// version number match
|
||||
EEPROM_READ_VAR(i, axis_steps_per_unit);
|
||||
EEPROM_READ_VAR(i, max_feedrate);
|
||||
|
|
@ -336,16 +252,21 @@ void Config_RetrieveSettings()
|
|||
EEPROM_READ_VAR(i, max_z_jerk);
|
||||
EEPROM_READ_VAR(i, max_e_jerk);
|
||||
EEPROM_READ_VAR(i, add_homing);
|
||||
|
||||
#ifdef DELTA
|
||||
EEPROM_READ_VAR(i,endstop_adj);
|
||||
EEPROM_READ_VAR(i,delta_radius);
|
||||
EEPROM_READ_VAR(i,delta_diagonal_rod);
|
||||
EEPROM_READ_VAR(i,delta_segments_per_second);
|
||||
#endif//DELTA
|
||||
EEPROM_READ_VAR(i, endstop_adj); // 3 floats
|
||||
EEPROM_READ_VAR(i, delta_radius); // 1 float
|
||||
EEPROM_READ_VAR(i, delta_diagonal_rod); // 1 float
|
||||
EEPROM_READ_VAR(i, delta_segments_per_second); // 1 float
|
||||
#else
|
||||
for (int q=6; q--;) EEPROM_READ_VAR(i, dummy);
|
||||
#endif
|
||||
|
||||
#ifndef ULTIPANEL
|
||||
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed;
|
||||
int absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed;
|
||||
#endif//ULTIPANEL
|
||||
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed,
|
||||
absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed;
|
||||
#endif
|
||||
|
||||
EEPROM_READ_VAR(i, plaPreheatHotendTemp);
|
||||
EEPROM_READ_VAR(i, plaPreheatHPBTemp);
|
||||
EEPROM_READ_VAR(i, plaPreheatFanSpeed);
|
||||
|
|
@ -353,109 +274,97 @@ void Config_RetrieveSettings()
|
|||
EEPROM_READ_VAR(i, absPreheatHPBTemp);
|
||||
EEPROM_READ_VAR(i, absPreheatFanSpeed);
|
||||
EEPROM_READ_VAR(i, zprobe_zoffset);
|
||||
|
||||
#ifdef PIDTEMP
|
||||
float dummy = 0.0f;
|
||||
for (int e = 0; e < 4; e++) // 4 = max extruders supported by marlin
|
||||
{
|
||||
if (e < EXTRUDERS)
|
||||
{
|
||||
for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) {
|
||||
// do not need to scale PID values as the values in EEPROM are already scaled
|
||||
EEPROM_READ_VAR(i,PID_PARAM(Kp,e));
|
||||
PID_PARAM(Kp, e) = dummy;
|
||||
EEPROM_READ_VAR(i, PID_PARAM(Ki, e));
|
||||
EEPROM_READ_VAR(i, PID_PARAM(Kd, e));
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
EEPROM_READ_VAR(i, PID_PARAM(Kc, e));
|
||||
#else//PID_ADD_EXTRUSION_RATE
|
||||
#else
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
#endif//PID_ADD_EXTRUSION_RATE
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
else {
|
||||
for (int q=3; q--;) EEPROM_READ_VAR(i, dummy);
|
||||
}
|
||||
}
|
||||
#else//PIDTEMP
|
||||
#else // !PIDTEMP
|
||||
// 4 x 3 = 12 slots for PID parameters
|
||||
float dummy = 0.0f;
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
EEPROM_READ_VAR(i,dummy);
|
||||
#endif//PIDTEMP
|
||||
for (int q=12; q--;) EEPROM_READ_VAR(i, dummy);
|
||||
#endif // !PIDTEMP
|
||||
|
||||
#ifndef DOGLCD
|
||||
int lcd_contrast;
|
||||
#endif//DOGLCD
|
||||
#endif
|
||||
EEPROM_READ_VAR(i, lcd_contrast);
|
||||
|
||||
#ifdef SCARA
|
||||
EEPROM_READ_VAR(i,axis_scaling);
|
||||
#endif//SCARA
|
||||
EEPROM_READ_VAR(i, axis_scaling); // 3 floats
|
||||
#else
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
#endif
|
||||
|
||||
#ifdef FWRETRACT
|
||||
EEPROM_READ_VAR(i, autoretract_enabled);
|
||||
EEPROM_READ_VAR(i, retract_length);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_READ_VAR(i, retract_length_swap);
|
||||
#endif//EXTRUDERS > 1
|
||||
#else
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
#endif
|
||||
EEPROM_READ_VAR(i, retract_feedrate);
|
||||
EEPROM_READ_VAR(i, retract_zlift);
|
||||
EEPROM_READ_VAR(i, retract_recover_length);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_READ_VAR(i, retract_recover_length_swap);
|
||||
#endif//EXTRUDERS > 1
|
||||
#else
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
#endif
|
||||
EEPROM_READ_VAR(i, retract_recover_feedrate);
|
||||
#endif // FWRETRACT
|
||||
|
||||
EEPROM_READ_VAR(i, volumetric_enabled);
|
||||
EEPROM_READ_VAR(i, filament_size[0]);
|
||||
#if EXTRUDERS > 1
|
||||
EEPROM_READ_VAR(i, filament_size[1]);
|
||||
#if EXTRUDERS > 2
|
||||
EEPROM_READ_VAR(i, filament_size[2]);
|
||||
#if EXTRUDERS > 3
|
||||
EEPROM_READ_VAR(i, filament_size[3]);
|
||||
#endif //EXTRUDERS > 3
|
||||
#endif //EXTRUDERS > 2
|
||||
#endif //EXTRUDERS > 1
|
||||
|
||||
for (int q = 0; q < 4; q++) {
|
||||
EEPROM_READ_VAR(i, dummy);
|
||||
if (q < EXTRUDERS) filament_size[q] = dummy;
|
||||
}
|
||||
|
||||
calculate_volumetric_multipliers();
|
||||
// Call updatePID (similar to when we have processed M301)
|
||||
updatePID();
|
||||
|
||||
// Report settings retrieved and length
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Stored settings retrieved");
|
||||
}
|
||||
else
|
||||
{
|
||||
Config_ResetDefault();
|
||||
SERIAL_ECHO(ver);
|
||||
SERIAL_ECHOPAIR(" stored settings retrieved (", (unsigned long)i);
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
}
|
||||
|
||||
#ifdef EEPROM_CHITCHAT
|
||||
Config_PrintSettings();
|
||||
#endif//EEPROM_CHITCHAT
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // EEPROM_SETTINGS
|
||||
|
||||
void Config_ResetDefault()
|
||||
{
|
||||
void Config_ResetDefault() {
|
||||
float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
|
||||
float tmp2[] = DEFAULT_MAX_FEEDRATE;
|
||||
long tmp3[] = DEFAULT_MAX_ACCELERATION;
|
||||
for (short i=0;i<4;i++)
|
||||
{
|
||||
for (int i = 0; i < NUM_AXIS; i++) {
|
||||
axis_steps_per_unit[i] = tmp1[i];
|
||||
max_feedrate[i] = tmp2[i];
|
||||
max_acceleration_units_per_sq_second[i] = tmp3[i];
|
||||
#ifdef SCARA
|
||||
if (i < sizeof(axis_scaling) / sizeof(*axis_scaling))
|
||||
axis_scaling[i] = 1;
|
||||
#endif//SCARA
|
||||
#endif
|
||||
}
|
||||
|
||||
// steps per sq second need to be updated to agree with the units per sq second
|
||||
|
|
@ -470,13 +379,15 @@ void Config_ResetDefault()
|
|||
max_z_jerk = DEFAULT_ZJERK;
|
||||
max_e_jerk = DEFAULT_EJERK;
|
||||
add_homing[X_AXIS] = add_homing[Y_AXIS] = add_homing[Z_AXIS] = 0;
|
||||
|
||||
#ifdef DELTA
|
||||
endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0;
|
||||
delta_radius = DELTA_RADIUS;
|
||||
delta_diagonal_rod = DELTA_DIAGONAL_ROD;
|
||||
delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
|
||||
recalc_delta_settings(delta_radius, delta_diagonal_rod);
|
||||
#endif//DELTA
|
||||
#endif
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
|
||||
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
|
||||
|
|
@ -484,26 +395,29 @@ void Config_ResetDefault()
|
|||
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
|
||||
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
|
||||
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
#endif//ULTIPANEL
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
|
||||
#endif//ENABLE_AUTO_BED_LEVELING
|
||||
#endif
|
||||
|
||||
#ifdef DOGLCD
|
||||
lcd_contrast = DEFAULT_LCD_CONTRAST;
|
||||
#endif//DOGLCD
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#ifdef PID_PARAMS_PER_EXTRUDER
|
||||
for (int e = 0; e < EXTRUDERS; e++)
|
||||
#else // PID_PARAMS_PER_EXTRUDER
|
||||
#else
|
||||
int e = 0; // only need to write once
|
||||
#endif // PID_PARAMS_PER_EXTRUDER
|
||||
#endif
|
||||
{
|
||||
PID_PARAM(Kp, e) = DEFAULT_Kp;
|
||||
PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki);
|
||||
PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd);
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
PID_PARAM(Kc, e) = DEFAULT_Kc;
|
||||
#endif//PID_ADD_EXTRUSION_RATE
|
||||
#endif
|
||||
}
|
||||
// call updatePID (similar to when we have processed M301)
|
||||
updatePID();
|
||||
|
|
@ -514,15 +428,15 @@ void Config_ResetDefault()
|
|||
retract_length = RETRACT_LENGTH;
|
||||
#if EXTRUDERS > 1
|
||||
retract_length_swap = RETRACT_LENGTH_SWAP;
|
||||
#endif//EXTRUDERS > 1
|
||||
#endif
|
||||
retract_feedrate = RETRACT_FEEDRATE;
|
||||
retract_zlift = RETRACT_ZLIFT;
|
||||
retract_recover_length = RETRACT_RECOVER_LENGTH;
|
||||
#if EXTRUDERS > 1
|
||||
retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
|
||||
#endif//EXTRUDERS > 1
|
||||
#endif
|
||||
retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
|
||||
#endif//FWRETRACT
|
||||
#endif
|
||||
|
||||
volumetric_enabled = false;
|
||||
filament_size[0] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||
|
|
@ -532,12 +446,213 @@ void Config_ResetDefault()
|
|||
filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||
#if EXTRUDERS > 3
|
||||
filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
||||
#endif //EXTRUDERS > 3
|
||||
#endif //EXTRUDERS > 2
|
||||
#endif //EXTRUDERS > 1
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
calculate_volumetric_multipliers();
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
|
||||
|
||||
}
|
||||
|
||||
#ifndef DISABLE_M503
|
||||
|
||||
void Config_PrintSettings(bool forReplay) {
|
||||
// Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Steps per unit:");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M92 X", axis_steps_per_unit[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y", axis_steps_per_unit[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z", axis_steps_per_unit[Z_AXIS]);
|
||||
SERIAL_ECHOPAIR(" E", axis_steps_per_unit[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
|
||||
#ifdef SCARA
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Scaling factors:");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M365 X", axis_scaling[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y", axis_scaling[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z", axis_scaling[Z_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
#endif // SCARA
|
||||
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M203 X", max_feedrate[X_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Y", max_feedrate[Y_AXIS]);
|
||||
SERIAL_ECHOPAIR(" Z", max_feedrate[Z_AXIS]);
|
||||
SERIAL_ECHOPAIR(" E", max_feedrate[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M201 X", max_acceleration_units_per_sq_second[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y", max_acceleration_units_per_sq_second[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z", max_acceleration_units_per_sq_second[Z_AXIS] );
|
||||
SERIAL_ECHOPAIR(" E", max_acceleration_units_per_sq_second[E_AXIS]);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M204 S", acceleration );
|
||||
SERIAL_ECHOPAIR(" T", retract_acceleration);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M205 S", minimumfeedrate );
|
||||
SERIAL_ECHOPAIR(" T", mintravelfeedrate );
|
||||
SERIAL_ECHOPAIR(" B", minsegmenttime );
|
||||
SERIAL_ECHOPAIR(" X", max_xy_jerk );
|
||||
SERIAL_ECHOPAIR(" Z", max_z_jerk);
|
||||
SERIAL_ECHOPAIR(" E", max_e_jerk);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Home offset (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M206 X", add_homing[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y", add_homing[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z", add_homing[Z_AXIS] );
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
#ifdef DELTA
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Endstop adjustement (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Y", endstop_adj[Y_AXIS] );
|
||||
SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS] );
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod );
|
||||
SERIAL_ECHOPAIR(" R", delta_radius );
|
||||
SERIAL_ECHOPAIR(" S", delta_segments_per_second );
|
||||
SERIAL_ECHOLN("");
|
||||
#endif // DELTA
|
||||
|
||||
#ifdef PIDTEMP
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("PID settings:");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echos values for E0
|
||||
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
|
||||
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
|
||||
SERIAL_ECHOLN("");
|
||||
#endif // PIDTEMP
|
||||
|
||||
#ifdef FWRETRACT
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M207 S", retract_length);
|
||||
SERIAL_ECHOPAIR(" F", retract_feedrate*60);
|
||||
SERIAL_ECHOPAIR(" Z", retract_zlift);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M208 S", retract_recover_length);
|
||||
SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0));
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Multi-extruder settings:");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap);
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap);
|
||||
SERIAL_ECHOLN("");
|
||||
}
|
||||
#endif // EXTRUDERS > 1
|
||||
|
||||
#endif // FWRETRACT
|
||||
|
||||
SERIAL_ECHO_START;
|
||||
if (volumetric_enabled) {
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Filament settings:");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
|
||||
SERIAL_ECHOLN("");
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]);
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 2
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
|
||||
SERIAL_ECHOLN("");
|
||||
#if EXTRUDERS > 3
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
} else {
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Filament settings: Disabled");
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CUSTOM_M_CODES
|
||||
SERIAL_ECHO_START;
|
||||
if (!forReplay) {
|
||||
SERIAL_ECHOLNPGM("Z-Probe Offset (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
}
|
||||
SERIAL_ECHO(" M");
|
||||
SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET);
|
||||
SERIAL_ECHOPAIR(" Z", -zprobe_zoffset);
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // !DISABLE_M503
|
||||
|
|
|
|||
|
|
@ -6,9 +6,9 @@
|
|||
void Config_ResetDefault();
|
||||
|
||||
#ifndef DISABLE_M503
|
||||
void Config_PrintSettings();
|
||||
void Config_PrintSettings(bool forReplay=false);
|
||||
#else
|
||||
FORCE_INLINE void Config_PrintSettings() {}
|
||||
FORCE_INLINE void Config_PrintSettings(bool forReplay=false) {}
|
||||
#endif
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
|
|
@ -19,4 +19,4 @@ FORCE_INLINE void Config_StoreSettings() {}
|
|||
FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
|
||||
#endif
|
||||
|
||||
#endif//CONFIG_STORE_H
|
||||
#endif // __CONFIG_STORE_H
|
||||
|
|
|
|||
|
|
@ -164,7 +164,7 @@
|
|||
// M500 - stores parameters in EEPROM
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
// M503 - print the current settings (from memory not from EEPROM)
|
||||
// M503 - print the current settings (from memory not from EEPROM). Use S0 to leave off headings.
|
||||
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
||||
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
||||
// M665 - set delta configurations
|
||||
|
|
@ -3581,7 +3581,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
break;
|
||||
case 503: // M503 print settings currently in memory
|
||||
{
|
||||
Config_PrintSettings();
|
||||
Config_PrintSettings(code_seen('S') && code_value == 0);
|
||||
}
|
||||
break;
|
||||
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||
|
|
|
|||
Loading…
Reference in a new issue