zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Probe Offset Wizard improvements (#20239)

Browse source
This commit is contained in:
swissnorp 2020-11-26 04:38:00 +01:00 committed by Scott Lahteine
parent c86ede8cfb
commit 0c24347cdb
8 changed files with 109 additions and 60 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/Configuration_adv.h
View file

@ -1084,8 +1084,14 @@
#if HAS_BED_PROBE
//#define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD)
#define PROBE_OFFSET_START -4.0 // Estimated nozzle-to-probe Z offset, plus a little extra
//#define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER // Set a convenient position to do the measurement
//
// Enable to init the Probe Z-Offset when starting the Wizard.
// Use the estimated nozzle-to-probe Z offset, plus a little more.
//
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif

4
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -324,7 +324,7 @@ void GcodeSuite::G28() {
? 0
: (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT);
if (z_homing_height && (doX || doY || (ENABLED(Z_SAFE_HOMING) && doZ))) {
if (z_homing_height && (doX || doY || TERN0(Z_SAFE_HOMING, doZ))) {
// Raise Z before homing any other axes and z is not already high enough (never lower z)
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
do_z_clearance(z_homing_height, true, DISABLED(UNKNOWN_Z_NO_RAISE));
@ -337,7 +337,7 @@ void GcodeSuite::G28() {
#endif
// Home Y (before X)
if (ENABLED(HOME_Y_BEFORE_X) && (doY || (ENABLED(CODEPENDENT_XY_HOMING) && doX)))
if (ENABLED(HOME_Y_BEFORE_X) && (doY || TERN0(CODEPENDENT_XY_HOMING, doX)))
homeaxis(Y_AXIS);
// Home X

33
Marlin/src/inc/SanityCheck.h
View file

@ -525,6 +525,8 @@
#error "EVENT_GCODE_SD_STOP is now EVENT_GCODE_SD_ABORT."
#elif defined(GRAPHICAL_TFT_ROTATE_180)
#error "GRAPHICAL_TFT_ROTATE_180 is now TFT_ROTATION set to TFT_ROTATE_180."
#elif defined(PROBE_OFFSET_START)
#error "PROBE_OFFSET_START is now PROBE_OFFSET_WIZARD_START_Z."
#elif defined(POWER_LOSS_PULL)
#error "POWER_LOSS_PULL is now specifically POWER_LOSS_PULL(UP|DOWN)."
#elif defined(FIL_RUNOUT_INVERTING)
@ -1345,25 +1347,32 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "Z_MIN_PROBE_PIN must be defined if Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN is not enabled."
#endif
/**
* Check for improper NOZZLE_TO_PROBE_OFFSET
*/
constexpr xyz_pos_t sanity_nozzle_to_probe_offset = NOZZLE_TO_PROBE_OFFSET;
#if ENABLED(NOZZLE_AS_PROBE)
constexpr float sanity_nozzle_to_probe_offset[] = NOZZLE_TO_PROBE_OFFSET;
static_assert(sanity_nozzle_to_probe_offset[0] == 0.0 && sanity_nozzle_to_probe_offset[1] == 0.0,
"NOZZLE_AS_PROBE requires the X,Y offsets in NOZZLE_TO_PROBE_OFFSET to be 0,0.");
#endif
#if DISABLED(NOZZLE_AS_PROBE)
static_assert(PROBING_MARGIN >= 0, "PROBING_MARGIN must be >= 0.");
static_assert(PROBING_MARGIN_BACK >= 0, "PROBING_MARGIN_BACK must be >= 0.");
static_assert(sanity_nozzle_to_probe_offset.x == 0 && sanity_nozzle_to_probe_offset.y == 0,
"NOZZLE_AS_PROBE requires the XY offsets in NOZZLE_TO_PROBE_OFFSET to both be 0.");
#else
static_assert(sanity_nozzle_to_probe_offset.z <= 0.25,
"Are you sure your Probe triggers above the nozzle? Set a negative Z value in the NOZZLE_TO_PROBE_OFFSET.");
#ifdef PROBE_OFFSET_WIZARD_START_Z
static_assert(PROBE_OFFSET_WIZARD_START_Z <= 0.25,
"Are you sure your Probe triggers above the nozzle? Set a negative value for PROBE_OFFSET_WIZARD_START_Z.");
#endif
static_assert(PROBING_MARGIN >= 0, "PROBING_MARGIN must be >= 0.");
static_assert(PROBING_MARGIN_BACK >= 0, "PROBING_MARGIN_BACK must be >= 0.");
static_assert(PROBING_MARGIN_FRONT >= 0, "PROBING_MARGIN_FRONT must be >= 0.");
static_assert(PROBING_MARGIN_LEFT >= 0, "PROBING_MARGIN_LEFT must be >= 0.");
static_assert(PROBING_MARGIN_LEFT >= 0, "PROBING_MARGIN_LEFT must be >= 0.");
static_assert(PROBING_MARGIN_RIGHT >= 0, "PROBING_MARGIN_RIGHT must be >= 0.");
#endif
#define _MARGIN(A) TERN(IS_SCARA, SCARA_PRINTABLE_RADIUS, TERN(DELTA, DELTA_PRINTABLE_RADIUS, ((A##_BED_SIZE) / 2)))
static_assert(PROBING_MARGIN < _MARGIN(X), "PROBING_MARGIN is too large.");
static_assert(PROBING_MARGIN_BACK < _MARGIN(Y), "PROBING_MARGIN_BACK is too large.");
static_assert(PROBING_MARGIN < _MARGIN(X), "PROBING_MARGIN is too large.");
static_assert(PROBING_MARGIN_BACK < _MARGIN(Y), "PROBING_MARGIN_BACK is too large.");
static_assert(PROBING_MARGIN_FRONT < _MARGIN(Y), "PROBING_MARGIN_FRONT is too large.");
static_assert(PROBING_MARGIN_LEFT < _MARGIN(X), "PROBING_MARGIN_LEFT is too large.");
static_assert(PROBING_MARGIN_LEFT < _MARGIN(X), "PROBING_MARGIN_LEFT is too large.");
static_assert(PROBING_MARGIN_RIGHT < _MARGIN(X), "PROBING_MARGIN_RIGHT is too large.");
#undef _MARGIN

2
Marlin/src/lcd/language/language_en.h
View file

@ -673,6 +673,8 @@ namespace Language_en {
PROGMEM Language_Str MSG_REHEATING = _UxGT("Reheating...");
PROGMEM Language_Str MSG_PROBE_WIZARD = _UxGT("Z Probe Wizard");
PROGMEM Language_Str MSG_PROBE_WIZARD_PROBING = _UxGT("Probing Z Reference");
PROGMEM Language_Str MSG_PROBE_WIZARD_MOVING = _UxGT("Moving to Probing Pos");
PROGMEM Language_Str MSG_SOUND = _UxGT("Sound");

2
Marlin/src/lcd/marlinui.h
View file

@ -624,7 +624,7 @@ public:
//
// Special handling if a move is underway
//
#if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)) || (ENABLED(PROBE_OFFSET_WIZARD) && defined(PROBE_OFFSET_WIZARD_XY_POS))
#if ANY(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION, PROBE_OFFSET_WIZARD) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
#define LCD_HAS_WAIT_FOR_MOVE 1
static bool wait_for_move;
#else

2
Marlin/src/lcd/menu/menu.h
View file

@ -220,7 +220,7 @@ void _lcd_draw_homing();
#endif
#if ENABLED(PROBE_OFFSET_WIZARD)
void home_and_goto_probe_offset_wizard();
void goto_probe_offset_wizard();
#endif
#if ENABLED(LCD_BED_LEVELING) || (HAS_LEVELING && DISABLED(SLIM_LCD_MENUS))

2
Marlin/src/lcd/menu/menu_advanced.cpp
View file

@ -488,7 +488,7 @@ void menu_backlash();
EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#if ENABLED(PROBE_OFFSET_WIZARD)
SUBMENU(MSG_PROBE_WIZARD, home_and_goto_probe_offset_wizard);
SUBMENU(MSG_PROBE_WIZARD, goto_probe_offset_wizard);
#endif
END_MENU();

114
Marlin/src/lcd/menu/menu_probe_offset.cpp
View file

@ -28,12 +28,6 @@
#if ENABLED(PROBE_OFFSET_WIZARD)
#ifndef PROBE_OFFSET_START
#error "PROBE_OFFSET_WIZARD requires a PROBE_OFFSET_START with a negative value."
#else
static_assert(PROBE_OFFSET_START < 0, "PROBE_OFFSET_START must be < 0. Please update your configuration.");
#endif
#include "menu_item.h"
#include "menu_addon.h"
#include "../../gcode/queue.h"
@ -46,21 +40,20 @@
#endif
// Global storage
float z_offset_backup, calculated_z_offset;
float z_offset_backup, calculated_z_offset, z_offset_ref;
TERN_(HAS_LEVELING, bool leveling_was_active);
void prepare_for_calibration() {
z_offset_backup = probe.offset.z;
// Disable soft endstops for free Z movement
SET_SOFT_ENDSTOP_LOOSE(true);
// Disable leveling for raw planner motion
#if HAS_LEVELING
leveling_was_active = planner.leveling_active;
set_bed_leveling_enabled(false);
#endif
inline void z_clearance_move() {
do_z_clearance(
#ifdef Z_AFTER_HOMING
Z_AFTER_HOMING
#elif defined(Z_HOMING_HEIGHT)
Z_HOMING_HEIGHT
#else
10
#endif
);
}
void set_offset_and_go_back(const float &z) {
@ -77,7 +70,7 @@ void _goto_manual_move_z(const float scale) {
void probe_offset_wizard_menu() {
START_MENU();
calculated_z_offset = probe.offset.z + current_position.z;
calculated_z_offset = probe.offset.z + current_position.z - z_offset_ref;
if (LCD_HEIGHT >= 4)
STATIC_ITEM(MSG_MOVE_NOZZLE_TO_BED, SS_CENTER|SS_INVERT);
@ -92,7 +85,7 @@ void probe_offset_wizard_menu() {
char tmp[20], numstr[10];
// Determine digits needed right of decimal
const uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
sprintf_P(tmp, GET_TEXT(MSG_MOVE_Z_DIST), dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr));
#if DISABLED(HAS_GRAPHICAL_TFT)
extern const char NUL_STR[];
@ -107,47 +100,86 @@ void probe_offset_wizard_menu() {
ACTION_ITEM(MSG_BUTTON_DONE, []{
set_offset_and_go_back(calculated_z_offset);
do_z_clearance(20.0
#ifdef Z_AFTER_HOMING
- 20.0 + Z_AFTER_HOMING
#endif
);
current_position.z = z_offset_ref; // Set Z to z_offset_ref, as we can expect it is at probe height
sync_plan_position();
z_clearance_move(); // Raise Z as if it was homed
});
ACTION_ITEM(MSG_BUTTON_CANCEL, []{
set_offset_and_go_back(z_offset_backup);
// If wizard-homing was done by probe with with PROBE_OFFSET_WIZARD_START_Z
#if EITHER(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, USE_PROBE_FOR_Z_HOMING) && defined(PROBE_OFFSET_WIZARD_START_Z)
set_axis_never_homed(Z_AXIS); // On cancel the Z position needs correction
queue.inject_P(PSTR("G28Z"));
#else // Otherwise do a Z clearance move like after Homing
z_clearance_move();
#endif
});
END_MENU();
}
#ifdef PROBE_OFFSET_WIZARD_XY_POS
void prepare_for_probe_offset_wizard() {
if (ui.wait_for_move) return;
#define HAS_PROBE_OFFSET_WIZARD_XY_POS 1
#if defined(PROBE_OFFSET_WIZARD_XY_POS) || NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, USE_PROBE_FOR_Z_HOMING)
if (ui.should_draw()) MenuItem_static::draw(1, GET_TEXT(MSG_PROBE_WIZARD_PROBING));
inline void goto_probe_offset_wizard() {
if (ui.wait_for_move) return;
#ifndef PROBE_OFFSET_WIZARD_XY_POS
#define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER
#endif
// Get X and Y from configuration, or use center
constexpr xy_pos_t wizard_pos = PROBE_OFFSET_WIZARD_XY_POS;
current_position = wizard_pos;
// Probe for Z reference
ui.wait_for_move = true;
line_to_current_position(MMM_TO_MMS(HOMING_FEEDRATE_XY)); // Could invoke idle()
z_offset_ref = probe.probe_at_point(wizard_pos, PROBE_PT_STOW, 0, true);
ui.wait_for_move = false;
ui.synchronize();
prepare_for_calibration();
probe.offset.z = PROBE_OFFSET_START;
ui.goto_screen(probe_offset_wizard_menu);
ui.defer_status_screen();
}
#endif
#endif
void home_and_goto_probe_offset_wizard() {
// Move Nozzle to Probing/Homing Position
ui.wait_for_move = true;
current_position += probe.offset_xy;
line_to_current_position(MMM_TO_MMS(HOMING_FEEDRATE_XY));
ui.synchronize(GET_TEXT(MSG_PROBE_WIZARD_MOVING));
ui.wait_for_move = false;
// Go to Calibration Menu
ui.goto_screen(probe_offset_wizard_menu);
ui.defer_status_screen();
}
void goto_probe_offset_wizard() {
ui.defer_status_screen();
set_all_unhomed();
// Store probe.offset.z for Case: Cancel
z_offset_backup = probe.offset.z;
#ifdef PROBE_OFFSET_WIZARD_START_Z
probe.offset.z = PROBE_OFFSET_WIZARD_START_Z;
#endif
// Store Bed-Leveling-State and disable
#if HAS_LEVELING
leveling_was_active = planner.leveling_active;
set_bed_leveling_enabled(false);
#endif
// Home all axes
queue.inject_P(G28_STR);
ui.goto_screen([]{
_lcd_draw_homing();
if (all_axes_homed())
ui.goto_screen(TERN(HAS_PROBE_OFFSET_WIZARD_XY_POS, goto_probe_offset_wizard, probe_offset_wizard_menu));
if (all_axes_homed()) {
SET_SOFT_ENDSTOP_LOOSE(true); // Disable soft endstops for free Z movement
z_offset_ref = 0; // Set Z Value for Wizard Position to 0
ui.goto_screen(prepare_for_probe_offset_wizard);
ui.defer_status_screen();
}
});
}
#endif // PROBE_OFFSET_WIZARD