Update Polish language (#17525)

This commit is contained in:
android444 2020-04-16 10:40:17 +02:00 committed by GitHub
parent d8b8d88276
commit 0ce532547a
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -159,7 +159,7 @@ namespace Language_pl {
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 Nagrzewanie dyszy"); PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 Nagrzewanie dyszy");
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Napełnianie ręczne..."); PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Napełnianie ręczne...");
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("Napełnij kreśloną długością"); PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("Napełnij kreśloną długością");
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("Napełianie zakończone"); PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("Napełnianie zakończone");
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26 Przewane"); PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26 Przewane");
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("Opuszczanie G26"); PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("Opuszczanie G26");
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("Kontynuuj tworzenie siatki"); PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("Kontynuuj tworzenie siatki");
@ -184,10 +184,10 @@ namespace Language_pl {
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Dostrajaj najbliższy"); PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Dostrajaj najbliższy");
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("Przechowywanie siatki"); PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("Przechowywanie siatki");
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Slot Pamięci"); PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Slot Pamięci");
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Załaduj siatke stołu"); PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Załaduj siatkę stołu");
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Zapisz siatke stołu"); PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Zapisz siatkę stołu");
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("Siatka %i załadowana"); PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("Siatka %i załadowana");
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("Siatka %i Zapisana"); PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("Siatka %i zapisana");
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("Brak magazynu"); PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("Brak magazynu");
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Błąd: Zapis UBL"); PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Błąd: Zapis UBL");
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Bład: Odczyt UBL"); PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Bład: Odczyt UBL");
@ -291,8 +291,8 @@ namespace Language_pl {
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E w mm³"); PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E w mm³");
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Śr. fil."); PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Śr. fil.");
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Śr. fil. *"); PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Śr. fil. *");
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Wyładuj mm"); PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Wysuń mm");
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Załaduj mm"); PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Wsuń mm");
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *"); PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *");
PROGMEM Language_Str MSG_CONTRAST = _UxGT("Kontrast LCD"); PROGMEM Language_Str MSG_CONTRAST = _UxGT("Kontrast LCD");
@ -345,11 +345,11 @@ namespace Language_pl {
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Dysza w oczekiwaniu"); PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Dysza w oczekiwaniu");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Zmień filament"); PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Zmień filament");
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Zmień filament *"); PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Zmień filament *");
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Załaduj Filament"); PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Wsuń Filament");
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("Załaduj Filament *"); PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("Wsuń Filament *");
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Wyładuj Filament"); PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Wysuń Filament");
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("Wyładuj Filament *"); PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("Wysuń Filament *");
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Wyładuj wszystkie"); PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Wysuń wszystkie");
PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("Inicjal. karty SD"); PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("Inicjal. karty SD");
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Zmiana karty SD"); PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Zmiana karty SD");
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("Zwolnienie karty"); PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("Zwolnienie karty");
@ -367,7 +367,7 @@ namespace Language_pl {
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD"); PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain"); PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("NIEBEZPIECZNE: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?"); PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("UWAGA: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?");
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI"); PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("Init TouchMI"); PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("Init TouchMI");
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test"); PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test");
@ -465,8 +465,8 @@ namespace Language_pl {
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Zapisz DAC EEPROM"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Zapisz DAC EEPROM");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("ZMIEŃ FILAMENT"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("ZMIEŃ FILAMENT");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("WYDRUK WSTRZYMANY"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("WYDRUK WSTRZYMANY");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("ZAŁADUJ FILAMENT"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("WSUŃ FILAMENT");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("WYŁADUJ FILAMENT"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("WYSUŃ FILAMENT");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("OPCJE WZNOWIENIA:"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("OPCJE WZNOWIENIA:");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Oczyść więcej"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Oczyść więcej");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Kontynuuj"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Kontynuuj");
@ -483,15 +483,15 @@ namespace Language_pl {
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU wymaga uwagi."); PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU wymaga uwagi.");
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Wznów wydruk"); PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Wznów wydruk");
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Wznawianie..."); PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Wznawianie...");
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Załaduj filament"); PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Wsuń filament");
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Załaduj wszystko"); PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Wsuń wszystko");
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Załaduj do dyszy"); PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Wsuń do dyszy");
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Wysuń filament"); PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Wysuń filament");
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Wysuń filament ~"); PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Wysuń filament ~");
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Wyładuj filament"); PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Wysuń filament");
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Ładowanie fil. %i..."); PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Wsuwanie fil. %i...");
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Wysuwanie fil. ..."); PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Wysuwanie fil. ...");
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Wyładowywanie fil...."); PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Wysuwanie fil....");
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("Wszystko"); PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("Wszystko");
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("Filament ~"); PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Resetuj MMU"); PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Resetuj MMU");
@ -547,7 +547,7 @@ namespace Language_pl {
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Kliknij by nagrzać")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Kliknij by nagrzać"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Nagrzewanie...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Nagrzewanie..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Wysuwanie...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Wysuwanie..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Ładowanie...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Wsuwanie..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Oczyszczanie...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Oczyszczanie..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Kliknij by zakończyć")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Kliknij by zakończyć"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Wznawianie...")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Wznawianie..."));