Get FolgerTech i3-2020 working again with 32-bit platforms (#7944)
Setup FolgerTech i3-2020 Configuration files as a reference platform for 32-Bit work. Also fix MAX7219 debug lights on 32-bit platforms.
This commit is contained in:
parent
e9cf9ad3f3
commit
0e260c6c1d
|
@ -119,12 +119,13 @@
|
|||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB // For people switching over to the Panucatt Re-ARM board
|
||||
//#define MOTHERBOARD BOARD_RAMPS_14_EFB // For unmodified printers using Atmega-2560 and RAMPS boards.
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020"
|
||||
#define CUSTOM_MACHINE_NAME "FT-2020 v2"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
|
@ -777,15 +778,15 @@
|
|||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 207
|
||||
#define Y_BED_SIZE 182
|
||||
//#define X_BED_SIZE 207 // For now... use the old method of X_MIN_POS and X_MAX_POS to set X size
|
||||
//#define Y_BED_SIZE 182 // For now... use the old method of Y_MIN_POS and Y_MAX_POS to set Y size
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 6
|
||||
#define Y_MIN_POS 3
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define X_MAX_POS 207
|
||||
#define Y_MAX_POS 182
|
||||
#define Z_MAX_POS 175
|
||||
|
||||
// If enabled, axes won't move below MIN_POS in response to movement commands.
|
||||
|
@ -1037,7 +1038,7 @@
|
|||
//
|
||||
// M100 Free Memory Watcher
|
||||
//
|
||||
#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
|
||||
//#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
|
||||
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
|
|
|
@ -1391,11 +1391,15 @@
|
|||
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
|
||||
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
|
||||
*/
|
||||
//#define MAX7219_DEBUG
|
||||
#define MAX7219_DEBUG
|
||||
#if ENABLED(MAX7219_DEBUG)
|
||||
#define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 57 // 78 on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 44 // 79 on Re-ARM
|
||||
//#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display
|
||||
//#define MAX7219_DIN_PIN 57 // on RAMPS
|
||||
//#define MAX7219_LOAD_PIN 44 // on RAMPS
|
||||
|
||||
#define MAX7219_CLK_PIN 77 // on Re-ARM // Configuration of the 3 pins to control the display
|
||||
#define MAX7219_DIN_PIN 78 // on Re-ARM
|
||||
#define MAX7219_LOAD_PIN 79 // on Re-ARM
|
||||
|
||||
/**
|
||||
* Sample debug features
|
||||
|
|
|
@ -63,18 +63,38 @@ static uint8_t LEDs[8] = { 0 };
|
|||
|
||||
void Max7219_PutByte(uint8_t data) {
|
||||
for (uint8_t i = 8; i--;) {
|
||||
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
||||
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
||||
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
||||
#ifdef CPU_32_BIT // The 32-bit processors are so fast, a small delay in the code is needed
|
||||
// to let the signal wires stabilize.
|
||||
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
||||
delayMicroseconds(5);
|
||||
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
||||
delayMicroseconds(5);
|
||||
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
||||
delayMicroseconds(5);
|
||||
#else
|
||||
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
||||
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
||||
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
||||
#endif
|
||||
|
||||
data <<= 1;
|
||||
}
|
||||
}
|
||||
|
||||
void Max7219(const uint8_t reg, const uint8_t data) {
|
||||
WRITE(MAX7219_LOAD_PIN, LOW); // begin
|
||||
#ifdef CPU_32_BIT // The 32-bit processors are so fast, a small delay in the code is needed
|
||||
delayMicroseconds(5); // to let the signal wires stabilize.
|
||||
#endif
|
||||
Max7219_PutByte(reg); // specify register
|
||||
Max7219_PutByte(data); // put data
|
||||
#ifdef CPU_32_BIT
|
||||
delayMicroseconds(5);
|
||||
#endif
|
||||
WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data
|
||||
#ifdef CPU_32_BIT
|
||||
delayMicroseconds(5);
|
||||
#endif
|
||||
WRITE(MAX7219_LOAD_PIN, HIGH);
|
||||
}
|
||||
|
||||
|
@ -135,6 +155,7 @@ void Max7219_init() {
|
|||
SET_OUTPUT(MAX7219_CLK_PIN);
|
||||
|
||||
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
|
||||
delay(1);
|
||||
|
||||
//initiation of the max 7219
|
||||
Max7219(max7219_reg_scanLimit, 0x07);
|
||||
|
@ -187,9 +208,13 @@ void Max7219_init() {
|
|||
void Max7219_idle_tasks() {
|
||||
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
|
||||
static int debug_cnt = 0;
|
||||
if (debug_cnt++ > 100) {
|
||||
Max7219_LED_Toggle(7, 7);
|
||||
debug_cnt = 0;
|
||||
#ifdef CPU_32_BIT
|
||||
if (debug_cnt++ > 400) {
|
||||
#else
|
||||
if (debug_cnt++ > 100) {
|
||||
#endif
|
||||
Max7219_LED_Toggle(7, 7);
|
||||
debug_cnt = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
Loading…
Reference in a new issue