zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Replace PLA/ABS preheating with generic

Browse source
This commit is contained in:
Scott Lahteine 2016-07-09 15:20:12 -07:00
parent c23dd7eefc
commit 1026e5b071
52 changed files with 490 additions and 483 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
Marlin/Configuration.h
View file

@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/Marlin_main.cpp
View file

@ -4908,32 +4908,32 @@ inline void gcode_M140() {
case 0: case 0:
if (code_seen('H')) { if (code_seen('H')) {
v = code_value_int(); v = code_value_int();
plaPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
} }
if (code_seen('F')) { if (code_seen('F')) {
v = code_value_int(); v = code_value_int();
plaPreheatFanSpeed = constrain(v, 0, 255); preheatFanSpeed1 = constrain(v, 0, 255);
} }
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (code_seen('B')) { if (code_seen('B')) {
v = code_value_int(); v = code_value_int();
plaPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
} }
#endif #endif
break; break;
case 1: case 1:
if (code_seen('H')) { if (code_seen('H')) {
v = code_value_int(); v = code_value_int();
absPreheatHotendTemp = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
} }
if (code_seen('F')) { if (code_seen('F')) {
v = code_value_int(); v = code_value_int();
absPreheatFanSpeed = constrain(v, 0, 255); preheatFanSpeed2 = constrain(v, 0, 255);
} }
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (code_seen('B')) { if (code_seen('B')) {
v = code_value_int(); v = code_value_int();
absPreheatHPBTemp = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
} }
#endif #endif
break; break;

12
Marlin/SanityCheck.h
View file

@ -644,6 +644,18 @@
#error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
#elif ENABLED(FILAMENTCHANGEENABLE) #elif ENABLED(FILAMENTCHANGEENABLE)
#error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
#elif defined(PLA_PREHEAT_HOTEND_TEMP)
#error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
#elif defined(PLA_PREHEAT_HPB_TEMP)
#error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
#elif defined(PLA_PREHEAT_FAN_SPEED)
#error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
#elif defined(ABS_PREHEAT_HOTEND_TEMP)
#error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
#elif defined(ABS_PREHEAT_HPB_TEMP)
#error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
#elif defined(ABS_PREHEAT_FAN_SPEED)
#error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
#endif #endif
#endif //SANITYCHECK_H #endif //SANITYCHECK_H

68
Marlin/configuration_store.cpp
View file

@ -85,12 +85,12 @@
* 285 M666 Z z_endstop_adj (float) * 285 M666 Z z_endstop_adj (float)
* *
* ULTIPANEL: * ULTIPANEL:
* 289 M145 S0 H plaPreheatHotendTemp (int) * 289 M145 S0 H preheatHotendTemp1 (int)
* 291 M145 S0 B plaPreheatHPBTemp (int) * 291 M145 S0 B preheatBedTemp1 (int)
* 293 M145 S0 F plaPreheatFanSpeed (int) * 293 M145 S0 F preheatFanSpeed1 (int)
* 295 M145 S1 H absPreheatHotendTemp (int) * 295 M145 S1 H preheatHotendTemp2 (int)
* 297 M145 S1 B absPreheatHPBTemp (int) * 297 M145 S1 B preheatBedTemp2 (int)
* 299 M145 S1 F absPreheatFanSpeed (int) * 299 M145 S1 F preheatFanSpeed2 (int)
* *
* PIDTEMP: * PIDTEMP:
* 301 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) * 301 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
@ -262,16 +262,16 @@ void Config_StoreSettings() {
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED, int preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND, preheatBedTemp1 = PREHEAT_1_TEMP_BED, preheatFanSpeed1 = PREHEAT_1_FAN_SPEED,
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND, preheatBedTemp2 = PREHEAT_2_TEMP_BED, preheatFanSpeed2 = PREHEAT_2_FAN_SPEED;
#endif // !ULTIPANEL #endif // !ULTIPANEL
EEPROM_WRITE_VAR(i, plaPreheatHotendTemp); EEPROM_WRITE_VAR(i, preheatHotendTemp1);
EEPROM_WRITE_VAR(i, plaPreheatHPBTemp); EEPROM_WRITE_VAR(i, preheatBedTemp1);
EEPROM_WRITE_VAR(i, plaPreheatFanSpeed); EEPROM_WRITE_VAR(i, preheatFanSpeed1);
EEPROM_WRITE_VAR(i, absPreheatHotendTemp); EEPROM_WRITE_VAR(i, preheatHotendTemp2);
EEPROM_WRITE_VAR(i, absPreheatHPBTemp); EEPROM_WRITE_VAR(i, preheatBedTemp2);
EEPROM_WRITE_VAR(i, absPreheatFanSpeed); EEPROM_WRITE_VAR(i, preheatFanSpeed2);
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -447,16 +447,16 @@ void Config_RetrieveSettings() {
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed, int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1,
absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed; preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
#endif #endif
EEPROM_READ_VAR(i, plaPreheatHotendTemp); EEPROM_READ_VAR(i, preheatHotendTemp1);
EEPROM_READ_VAR(i, plaPreheatHPBTemp); EEPROM_READ_VAR(i, preheatBedTemp1);
EEPROM_READ_VAR(i, plaPreheatFanSpeed); EEPROM_READ_VAR(i, preheatFanSpeed1);
EEPROM_READ_VAR(i, absPreheatHotendTemp); EEPROM_READ_VAR(i, preheatHotendTemp2);
EEPROM_READ_VAR(i, absPreheatHPBTemp); EEPROM_READ_VAR(i, preheatBedTemp2);
EEPROM_READ_VAR(i, absPreheatFanSpeed); EEPROM_READ_VAR(i, preheatFanSpeed2);
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) {
@ -604,12 +604,12 @@ void Config_ResetDefault() {
#endif #endif
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND;
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; preheatBedTemp1 = PREHEAT_1_TEMP_BED;
plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; preheatFanSpeed1 = PREHEAT_1_FAN_SPEED;
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP; preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND;
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; preheatBedTemp2 = PREHEAT_2_TEMP_BED;
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; preheatFanSpeed2 = PREHEAT_2_FAN_SPEED;
#endif #endif
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
@ -814,14 +814,14 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("Material heatup parameters:"); SERIAL_ECHOLNPGM("Material heatup parameters:");
CONFIG_ECHO_START; CONFIG_ECHO_START;
} }
SERIAL_ECHOPAIR(" M145 S0 H", plaPreheatHotendTemp); SERIAL_ECHOPAIR(" M145 S0 H", preheatHotendTemp1);
SERIAL_ECHOPAIR(" B", plaPreheatHPBTemp); SERIAL_ECHOPAIR(" B", preheatBedTemp1);
SERIAL_ECHOPAIR(" F", plaPreheatFanSpeed); SERIAL_ECHOPAIR(" F", preheatFanSpeed1);
SERIAL_EOL; SERIAL_EOL;
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M145 S1 H", absPreheatHotendTemp); SERIAL_ECHOPAIR(" M145 S1 H", preheatHotendTemp2);
SERIAL_ECHOPAIR(" B", absPreheatHPBTemp); SERIAL_ECHOPAIR(" B", preheatBedTemp2);
SERIAL_ECHOPAIR(" F", absPreheatFanSpeed); SERIAL_ECHOPAIR(" F", preheatFanSpeed2);
SERIAL_EOL; SERIAL_EOL;
#endif // ULTIPANEL #endif // ULTIPANEL

12
Marlin/example_configurations/Cartesio/Configuration.h
View file

@ -777,13 +777,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190 #define PREHEAT_1_TEMP_HOTEND 190
#define PLA_PREHEAT_HPB_TEMP 50 #define PREHEAT_1_TEMP_BED 50
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/Felix/Configuration.h
View file

@ -761,13 +761,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/Felix/DUAL/Configuration.h
View file

@ -759,13 +759,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/Hephestos/Configuration.h
View file

@ -770,13 +770,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 200 #define PREHEAT_1_TEMP_HOTEND 200
#define PLA_PREHEAT_HPB_TEMP 0 #define PREHEAT_1_TEMP_BED 0
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 220 #define PREHEAT_2_TEMP_HOTEND 220
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/Hephestos_2/Configuration.h
View file

@ -772,13 +772,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 210 #define PREHEAT_1_TEMP_HOTEND 210
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/K8200/Configuration.h
View file

@ -795,13 +795,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190 #define PREHEAT_1_TEMP_HOTEND 190
#define PLA_PREHEAT_HPB_TEMP 50 // K8200: set back to 70 if you have an upgraded heatbed power supply #define PREHEAT_1_TEMP_BED 50 // K8200: set back to 70 if you have an upgraded heatbed power supply
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 60 // K8200: set back to 110 if you have an upgraded heatbed power supply #define PREHEAT_2_TEMP_BED 60 // K8200: set back to 110 if you have an upgraded heatbed power supply
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/K8400/Configuration.h
View file

@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 210 #define PREHEAT_1_TEMP_HOTEND 210
#define PLA_PREHEAT_HPB_TEMP 0 #define PREHEAT_1_TEMP_BED 0
#define PLA_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 245 #define PREHEAT_2_TEMP_HOTEND 245
#define ABS_PREHEAT_HPB_TEMP 0 #define PREHEAT_2_TEMP_BED 0
#define ABS_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/K8400/Dual Heads/Configuration.h
View file

@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 210 #define PREHEAT_1_TEMP_HOTEND 210
#define PLA_PREHEAT_HPB_TEMP 0 #define PREHEAT_1_TEMP_BED 0
#define PLA_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 245 #define PREHEAT_2_TEMP_HOTEND 245
#define ABS_PREHEAT_HPB_TEMP 0 #define PREHEAT_2_TEMP_BED 0
#define ABS_PREHEAT_FAN_SPEED 165 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file

@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/RigidBot/Configuration.h
View file

@ -776,13 +776,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/SCARA/Configuration.h
View file

@ -786,13 +786,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/TAZ4/Configuration.h
View file

@ -799,13 +799,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 230 #define PREHEAT_2_TEMP_HOTEND 230
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/WITBOX/Configuration.h
View file

@ -770,13 +770,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 200 #define PREHEAT_1_TEMP_HOTEND 200
#define PLA_PREHEAT_HPB_TEMP 0 #define PREHEAT_1_TEMP_BED 0
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 220 #define PREHEAT_2_TEMP_HOTEND 220
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View file

@ -778,13 +778,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 110 #define PREHEAT_2_TEMP_BED 110
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/delta/biv2.5/Configuration.h
View file

@ -873,13 +873,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/delta/generic/Configuration.h
View file

@ -867,13 +867,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View file

@ -870,13 +870,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View file

@ -870,13 +870,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View file

@ -872,13 +872,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/makibox/Configuration.h
View file

@ -781,13 +781,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

12
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View file

@ -772,13 +772,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180 #define PREHEAT_1_TEMP_HOTEND 180
#define PLA_PREHEAT_HPB_TEMP 70 #define PREHEAT_1_TEMP_BED 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define PREHEAT_2_TEMP_HOTEND 240
#define ABS_PREHEAT_HPB_TEMP 100 #define PREHEAT_2_TEMP_BED 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// //
// Print job timer // Print job timer

20
Marlin/language_an.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Establir zero" #define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA" #define MSG_PREHEAT_1 "Precalentar PLA"
#define MSG_PREHEAT_PLA_N "Precalentar PLA " #define MSG_PREHEAT_1_N "Precalentar PLA "
#define MSG_PREHEAT_PLA_ALL "Precalentar PLA a" #define MSG_PREHEAT_1_ALL "Precalentar PLA a"
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base" #define MSG_PREHEAT_1_BEDONLY "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA" #define MSG_PREHEAT_1_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS" #define MSG_PREHEAT_2 "Precalentar ABS"
#define MSG_PREHEAT_ABS_N "Precalentar ABS " #define MSG_PREHEAT_2_N "Precalentar ABS "
#define MSG_PREHEAT_ABS_ALL "Precalentar ABS a" #define MSG_PREHEAT_2_ALL "Precalentar ABS a"
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base" #define MSG_PREHEAT_2_BEDONLY "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS" #define MSG_PREHEAT_2_SETTINGS "Achustar tem. ABS"
#define MSG_COOLDOWN "Enfriar" #define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent" #define MSG_SWITCH_PS_ON "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent" #define MSG_SWITCH_PS_OFF "Desenchegar Fuent"

20
Marlin/language_bg.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Задай Начало" #define MSG_SET_HOME_OFFSETS "Задай Начало"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Изходна точка" #define MSG_SET_ORIGIN "Изходна точка"
#define MSG_PREHEAT_PLA "Подгряване PLA" #define MSG_PREHEAT_1 "Подгряване PLA"
#define MSG_PREHEAT_PLA_N "Подгряване PLA" #define MSG_PREHEAT_1_N "Подгряване PLA"
#define MSG_PREHEAT_PLA_ALL "Подгр. PLA Всички" #define MSG_PREHEAT_1_ALL "Подгр. PLA Всички"
#define MSG_PREHEAT_PLA_BEDONLY "Подгр. PLA Легло" #define MSG_PREHEAT_1_BEDONLY "Подгр. PLA Легло"
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" #define MSG_PREHEAT_1_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_ABS "Подгряване ABS" #define MSG_PREHEAT_2 "Подгряване ABS"
#define MSG_PREHEAT_ABS_N "Подгряване ABS" #define MSG_PREHEAT_2_N "Подгряване ABS"
#define MSG_PREHEAT_ABS_ALL "Подгр. ABS Всички" #define MSG_PREHEAT_2_ALL "Подгр. ABS Всички"
#define MSG_PREHEAT_ABS_BEDONLY "Подгр. ABS Легло" #define MSG_PREHEAT_2_BEDONLY "Подгр. ABS Легло"
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" #define MSG_PREHEAT_2_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждане" #define MSG_COOLDOWN "Охлаждане"
#define MSG_SWITCH_PS_ON "Вкл. захранване" #define MSG_SWITCH_PS_ON "Вкл. захранване"
#define MSG_SWITCH_PS_OFF "Изкл. захранване" #define MSG_SWITCH_PS_OFF "Изкл. захранване"

20
Marlin/language_ca.h
View file

@ -50,16 +50,16 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Establir origen" #define MSG_SET_ORIGIN "Establir origen"
#define MSG_PREHEAT_PLA "Preescalfar PLA" #define MSG_PREHEAT_1 "Preescalfar PLA"
#define MSG_PREHEAT_PLA_N "Preescalfar PLA " #define MSG_PREHEAT_1_N "Preescalfar PLA "
#define MSG_PREHEAT_PLA_ALL "Preesc. tot PLA" #define MSG_PREHEAT_1_ALL "Preesc. tot PLA"
#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA" #define MSG_PREHEAT_1_BEDONLY "Preesc. llit PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA" #define MSG_PREHEAT_1_SETTINGS "Configuració PLA"
#define MSG_PREHEAT_ABS "Preescalfar ABS" #define MSG_PREHEAT_2 "Preescalfar ABS"
#define MSG_PREHEAT_ABS_N "Preescalfar ABS " #define MSG_PREHEAT_2_N "Preescalfar ABS "
#define MSG_PREHEAT_ABS_ALL "Preesc. tot ABS" #define MSG_PREHEAT_2_ALL "Preesc. tot ABS"
#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS" #define MSG_PREHEAT_2_BEDONLY "Preesc. llit ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS" #define MSG_PREHEAT_2_SETTINGS "Configuració ABS"
#define MSG_COOLDOWN "Refredar" #define MSG_COOLDOWN "Refredar"
#define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_SWITCH_PS_OFF "Switch power off"

20
Marlin/language_cn.h
View file

@ -47,16 +47,16 @@
#define MSG_SET_HOME_OFFSETS "\xbe\xbf\xbb\xbc\xbd\xc0\xc1" #define MSG_SET_HOME_OFFSETS "\xbe\xbf\xbb\xbc\xbd\xc0\xc1"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "\xbe\xbf\xbc\xbd" #define MSG_SET_ORIGIN "\xbe\xbf\xbc\xbd"
#define MSG_PREHEAT_PLA "\xc3\xc4 PLA" #define MSG_PREHEAT_1 "\xc3\xc4 PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xc5\xc6" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " \xc5\xc6"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xc4\xc7" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " \xc4\xc7"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xbf" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xbe\xbf"
#define MSG_PREHEAT_ABS "\xc3\xc4 ABS" #define MSG_PREHEAT_2 "\xc3\xc4 ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " \xc5\xc6"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " \xbe\xc6"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xbf" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xbe\xbf"
#define MSG_COOLDOWN "\xc8\xc9" #define MSG_COOLDOWN "\xc8\xc9"
#define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3" #define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3"
#define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6" #define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6"

20
Marlin/language_cz.h
View file

@ -58,16 +58,16 @@
#define MSG_SET_HOME_OFFSETS "Nastavit ofsety" #define MSG_SET_HOME_OFFSETS "Nastavit ofsety"
#define MSG_HOME_OFFSETS_APPLIED "Ofsety nastaveny" #define MSG_HOME_OFFSETS_APPLIED "Ofsety nastaveny"
#define MSG_SET_ORIGIN "Nastavit pocatek" #define MSG_SET_ORIGIN "Nastavit pocatek"
#define MSG_PREHEAT_PLA "Zahrat PLA" #define MSG_PREHEAT_1 "Zahrat PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Vse" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Vse"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Podloz" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Podloz"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " Nast" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Nast"
#define MSG_PREHEAT_ABS "Zahrat ABS" #define MSG_PREHEAT_2 "Zahrat ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Vse" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Vse"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Podloz" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Podloz"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " Nast" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Nast"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_da.h
View file

@ -54,16 +54,16 @@
#define MSG_SET_HOME_OFFSETS "Sæt forskyding af home" #define MSG_SET_HOME_OFFSETS "Sæt forskyding af home"
#define MSG_HOME_OFFSETS_APPLIED "Forskydninger af home pos. er tilføjet" #define MSG_HOME_OFFSETS_APPLIED "Forskydninger af home pos. er tilføjet"
#define MSG_SET_ORIGIN "Sæt origin" #define MSG_SET_ORIGIN "Sæt origin"
#define MSG_PREHEAT_PLA "Forvarm PLA" #define MSG_PREHEAT_1 "Forvarm PLA"
#define MSG_PREHEAT_PLA_N "Forvarm PLA " #define MSG_PREHEAT_1_N "Forvarm PLA "
#define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle" #define MSG_PREHEAT_1_ALL "Forvarm PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed" #define MSG_PREHEAT_1_BEDONLY "Forvarm PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf" #define MSG_PREHEAT_1_SETTINGS "Forvarm PLA conf"
#define MSG_PREHEAT_ABS "Forvarm ABS" #define MSG_PREHEAT_2 "Forvarm ABS"
#define MSG_PREHEAT_ABS_N "Forvarm ABS " #define MSG_PREHEAT_2_N "Forvarm ABS "
#define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle" #define MSG_PREHEAT_2_ALL "Forvarm ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed" #define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf" #define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_de.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Setze Homeoffsets" #define MSG_SET_HOME_OFFSETS "Setze Homeoffsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv" #define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"
#define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_PLA "Vorwärmen PLA" #define MSG_PREHEAT_1 "Vorwärmen PLA"
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA " #define MSG_PREHEAT_1_N "Vorwärmen PLA "
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle" #define MSG_PREHEAT_1_ALL "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" #define MSG_PREHEAT_1_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst." #define MSG_PREHEAT_1_SETTINGS "Vorw. PLA Einst."
#define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_2 "Vorwärmen ABS"
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS " #define MSG_PREHEAT_2_N "Vorwärmen ABS "
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle" #define MSG_PREHEAT_2_ALL "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" #define MSG_PREHEAT_2_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst." #define MSG_PREHEAT_2_SETTINGS "Vorw. ABS Einst."
#define MSG_COOLDOWN "Abkühlen" #define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Netzteil ein" #define MSG_SWITCH_PS_ON "Netzteil ein"
#define MSG_SWITCH_PS_OFF "Netzteil aus" #define MSG_SWITCH_PS_OFF "Netzteil aus"

40
Marlin/language_en.h
View file

@ -97,35 +97,35 @@
#ifndef MSG_SET_ORIGIN #ifndef MSG_SET_ORIGIN
#define MSG_SET_ORIGIN "Set origin" #define MSG_SET_ORIGIN "Set origin"
#endif #endif
#ifndef MSG_PREHEAT_PLA #ifndef MSG_PREHEAT_1
#define MSG_PREHEAT_PLA "Preheat PLA" #define MSG_PREHEAT_1 "Preheat PLA"
#endif #endif
#ifndef MSG_PREHEAT_PLA_N #ifndef MSG_PREHEAT_1_N
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#endif #endif
#ifndef MSG_PREHEAT_PLA_ALL #ifndef MSG_PREHEAT_1_ALL
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All"
#endif #endif
#ifndef MSG_PREHEAT_PLA_BEDONLY #ifndef MSG_PREHEAT_1_BEDONLY
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed"
#endif #endif
#ifndef MSG_PREHEAT_PLA_SETTINGS #ifndef MSG_PREHEAT_1_SETTINGS
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
#endif #endif
#ifndef MSG_PREHEAT_ABS #ifndef MSG_PREHEAT_2
#define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_2 "Preheat ABS"
#endif #endif
#ifndef MSG_PREHEAT_ABS_N #ifndef MSG_PREHEAT_2_N
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#endif #endif
#ifndef MSG_PREHEAT_ABS_ALL #ifndef MSG_PREHEAT_2_ALL
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All"
#endif #endif
#ifndef MSG_PREHEAT_ABS_BEDONLY #ifndef MSG_PREHEAT_2_BEDONLY
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed"
#endif #endif
#ifndef MSG_PREHEAT_ABS_SETTINGS #ifndef MSG_PREHEAT_2_SETTINGS
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
#endif #endif
#ifndef MSG_H1 #ifndef MSG_H1
#define MSG_H1 "1" #define MSG_H1 "1"

20
Marlin/language_es.h
View file

@ -53,16 +53,16 @@
#define MSG_SET_HOME_OFFSETS "Ajustar desfases" #define MSG_SET_HOME_OFFSETS "Ajustar desfases"
#define MSG_HOME_OFFSETS_APPLIED "Desfase aplicado" #define MSG_HOME_OFFSETS_APPLIED "Desfase aplicado"
#define MSG_SET_ORIGIN "Establecer origen" #define MSG_SET_ORIGIN "Establecer origen"
#define MSG_PREHEAT_PLA "Precalentar PLA" #define MSG_PREHEAT_1 "Precalentar PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA "Todo" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 "Todo"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA"Plataforma" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1"Plataforma"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA "Config" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 "Config"
#define MSG_PREHEAT_ABS "Precalentar ABS" #define MSG_PREHEAT_2 "Precalentar ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS "Todo" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 "Todo"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS "Plataforma" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 "Plataforma"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS "Config" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 "Config"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_eu.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Hasiera ipini" #define MSG_SET_ORIGIN "Hasiera ipini"
#define MSG_PREHEAT_PLA "Aurreberotu PLA" #define MSG_PREHEAT_1 "Aurreberotu PLA"
#define MSG_PREHEAT_PLA_N "Aurreberotu PLA " #define MSG_PREHEAT_1_N "Aurreberotu PLA "
#define MSG_PREHEAT_PLA_ALL "Berotu PLA Guztia" #define MSG_PREHEAT_1_ALL "Berotu PLA Guztia"
#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea" #define MSG_PREHEAT_1_BEDONLY "Berotu PLA Ohea"
#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig" #define MSG_PREHEAT_1_SETTINGS "Berotu PLA Konfig"
#define MSG_PREHEAT_ABS "Aurreberotu ABS" #define MSG_PREHEAT_2 "Aurreberotu ABS"
#define MSG_PREHEAT_ABS_N "Aurreberotu ABS " #define MSG_PREHEAT_2_N "Aurreberotu ABS "
#define MSG_PREHEAT_ABS_ALL "Berotu ABS Guztia" #define MSG_PREHEAT_2_ALL "Berotu ABS Guztia"
#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea" #define MSG_PREHEAT_2_BEDONLY "Berotu ABS Ohea"
#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig" #define MSG_PREHEAT_2_SETTINGS "Berotu ABS Konfig"
#define MSG_COOLDOWN "Hoztu" #define MSG_COOLDOWN "Hoztu"
#define MSG_SWITCH_PS_ON "Energia piztu" #define MSG_SWITCH_PS_ON "Energia piztu"
#define MSG_SWITCH_PS_OFF "Energia itzali" #define MSG_SWITCH_PS_OFF "Energia itzali"

20
Marlin/language_fi.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Aseta origo" #define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilämmitä PLA" #define MSG_PREHEAT_1 "Esilämmitä PLA"
#define MSG_PREHEAT_PLA_N "Esilämmitä PLA " #define MSG_PREHEAT_1_N "Esilämmitä PLA "
#define MSG_PREHEAT_PLA_ALL "Esilä. PLA Kaikki" #define MSG_PREHEAT_1_ALL "Esilä. PLA Kaikki"
#define MSG_PREHEAT_PLA_BEDONLY "Esilä. PLA Alusta" #define MSG_PREHEAT_1_BEDONLY "Esilä. PLA Alusta"
#define MSG_PREHEAT_PLA_SETTINGS "Esilämm. PLA konf" #define MSG_PREHEAT_1_SETTINGS "Esilämm. PLA konf"
#define MSG_PREHEAT_ABS "Esilämmitä ABS" #define MSG_PREHEAT_2 "Esilämmitä ABS"
#define MSG_PREHEAT_ABS_N "Esilämmitä ABS " #define MSG_PREHEAT_2_N "Esilämmitä ABS "
#define MSG_PREHEAT_ABS_ALL "Esilä. ABS Kaikki" #define MSG_PREHEAT_2_ALL "Esilä. ABS Kaikki"
#define MSG_PREHEAT_ABS_BEDONLY "Esilä. ABS Alusta" #define MSG_PREHEAT_2_BEDONLY "Esilä. ABS Alusta"
#define MSG_PREHEAT_ABS_SETTINGS "Esilämm. ABS konf" #define MSG_PREHEAT_2_SETTINGS "Esilämm. ABS konf"
#define MSG_COOLDOWN "Jäähdytä" #define MSG_COOLDOWN "Jäähdytä"
#define MSG_SWITCH_PS_ON "Virta päälle" #define MSG_SWITCH_PS_ON "Virta päälle"
#define MSG_SWITCH_PS_OFF "Virta pois" #define MSG_SWITCH_PS_OFF "Virta pois"

20
Marlin/language_fr.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Regler decal. origine" #define MSG_SET_HOME_OFFSETS "Regler decal. origine"
#define MSG_HOME_OFFSETS_APPLIED "Decalages appliques" #define MSG_HOME_OFFSETS_APPLIED "Decalages appliques"
#define MSG_SET_ORIGIN "Regler origine" #define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA "Prechauffage PLA" #define MSG_PREHEAT_1 "Prechauffage PLA"
#define MSG_PREHEAT_PLA_N "Prechauff. PLA " #define MSG_PREHEAT_1_N "Prechauff. PLA "
#define MSG_PREHEAT_PLA_ALL "Prech. PLA Tout" #define MSG_PREHEAT_1_ALL "Prech. PLA Tout"
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau" #define MSG_PREHEAT_1_BEDONLY "Prech. PLA Plateau"
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA" #define MSG_PREHEAT_1_SETTINGS "Regl. prech. PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS" #define MSG_PREHEAT_2 "Prechauffage ABS"
#define MSG_PREHEAT_ABS_N "Prechauff. ABS " #define MSG_PREHEAT_2_N "Prechauff. ABS "
#define MSG_PREHEAT_ABS_ALL "Prech. ABS Tout" #define MSG_PREHEAT_2_ALL "Prech. ABS Tout"
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau" #define MSG_PREHEAT_2_BEDONLY "Prech. ABS Plateau"
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS" #define MSG_PREHEAT_2_SETTINGS "Regl. prech. ABS"
#define MSG_COOLDOWN "Refroidir" #define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim." #define MSG_SWITCH_PS_ON "Allumer alim."
#define MSG_SWITCH_PS_OFF "Eteindre alim." #define MSG_SWITCH_PS_OFF "Eteindre alim."

20
Marlin/language_gl.h
View file

@ -54,16 +54,16 @@
#define MSG_SET_HOME_OFFSETS "Offsets na orixe" #define MSG_SET_HOME_OFFSETS "Offsets na orixe"
#define MSG_HOME_OFFSETS_APPLIED "Offsets fixados" #define MSG_HOME_OFFSETS_APPLIED "Offsets fixados"
#define MSG_SET_ORIGIN "Fixar orixe" #define MSG_SET_ORIGIN "Fixar orixe"
#define MSG_PREHEAT_PLA "Prequentar PLA" #define MSG_PREHEAT_1 "Prequentar PLA"
#define MSG_PREHEAT_PLA_N "Prequentar PLA " #define MSG_PREHEAT_1_N "Prequentar PLA "
#define MSG_PREHEAT_PLA_ALL "Preque. PLA Todo" #define MSG_PREHEAT_1_ALL "Preque. PLA Todo"
#define MSG_PREHEAT_PLA_BEDONLY "Preque. PLA Cama" #define MSG_PREHEAT_1_BEDONLY "Preque. PLA Cama"
#define MSG_PREHEAT_PLA_SETTINGS "Preque. PLA conf" #define MSG_PREHEAT_1_SETTINGS "Preque. PLA conf"
#define MSG_PREHEAT_ABS "Prequentar ABS" #define MSG_PREHEAT_2 "Prequentar ABS"
#define MSG_PREHEAT_ABS_N "Prequentar ABS " #define MSG_PREHEAT_2_N "Prequentar ABS "
#define MSG_PREHEAT_ABS_ALL "Preque. ABS Todo" #define MSG_PREHEAT_2_ALL "Preque. ABS Todo"
#define MSG_PREHEAT_ABS_BEDONLY "Preque. ABS Cama" #define MSG_PREHEAT_2_BEDONLY "Preque. ABS Cama"
#define MSG_PREHEAT_ABS_SETTINGS "Preque. ABS conf" #define MSG_PREHEAT_2_SETTINGS "Preque. ABS conf"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_hr.h
View file

@ -55,16 +55,16 @@
#define MSG_SET_HOME_OFFSETS "Postavi home offsete" #define MSG_SET_HOME_OFFSETS "Postavi home offsete"
#define MSG_HOME_OFFSETS_APPLIED "Offsets postavljeni" #define MSG_HOME_OFFSETS_APPLIED "Offsets postavljeni"
#define MSG_SET_ORIGIN "Postavi ishodište" #define MSG_SET_ORIGIN "Postavi ishodište"
#define MSG_PREHEAT_PLA "Predgrij PLA" #define MSG_PREHEAT_1 "Predgrij PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Sve" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Sve"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_ABS "Predgrij ABS" #define MSG_PREHEAT_2 "Predgrij ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Sve" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Sve"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_it.h
View file

@ -54,16 +54,16 @@
#define MSG_SET_HOME_OFFSETS "Imp. offset home" #define MSG_SET_HOME_OFFSETS "Imp. offset home"
#define MSG_HOME_OFFSETS_APPLIED "Offset applicato" #define MSG_HOME_OFFSETS_APPLIED "Offset applicato"
#define MSG_SET_ORIGIN "Imposta Origine" #define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA" #define MSG_PREHEAT_1 "Preriscalda PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Tutto" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Tutto"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Piatto" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Piatto"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_2 "Preriscalda ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Tutto" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Tutto"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Piatto" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Piatto"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
#define MSG_COOLDOWN "Raffredda" #define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Accendi aliment." #define MSG_SWITCH_PS_ON "Accendi aliment."
#define MSG_SWITCH_PS_OFF "Spegni aliment." #define MSG_SWITCH_PS_OFF "Spegni aliment."

20
Marlin/language_kana.h
View file

@ -56,16 +56,16 @@
#define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "ｷｼﾞｭﾝｵﾌｾｯﾄｾｯﾃｲ" ("Set home offsets") #define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "ｷｼﾞｭﾝｵﾌｾｯﾄｾｯﾃｲ" ("Set home offsets")
#define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\xb6\xde\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" // "ｵﾌｾｯﾄｶﾞﾃｷﾖｳｻﾚﾏｼﾀ" ("Offsets applied") #define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\xb6\xde\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" // "ｵﾌｾｯﾄｶﾞﾃｷﾖｳｻﾚﾏｼﾀ" ("Offsets applied")
#define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "ｷｼﾞｭﾝｾｯﾄ" ("Set origin") #define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "ｷｼﾞｭﾝｾｯﾄ" ("Set origin")
#define MSG_PREHEAT_PLA "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA") #define MSG_PREHEAT_1 "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA")
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All")
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed")
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf")
#define MSG_PREHEAT_ABS "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS") #define MSG_PREHEAT_2 "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS")
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " \xbd\xcd\xde\xc3" // " ｽﾍﾞﾃ" (" All")
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " \xcd\xde\xaf\xc4\xde" // " ﾍﾞｯﾄﾞ" (" Bed")
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xbe\xaf\xc3\xb2" // " ｾｯﾃｲ" (" conf")
#define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "ｶﾈﾂﾃｲｼ" ("Cooldown") #define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "ｶﾈﾂﾃｲｼ" ("Cooldown")
#define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "ﾃﾞﾝｹﾞﾝ ｵﾝ" ("Switch power on") #define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "ﾃﾞﾝｹﾞﾝ ｵﾝ" ("Switch power on")
#define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾃﾞﾝｹﾞﾝ ｵﾌ" ("Switch power off") #define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾃﾞﾝｹﾞﾝ ｵﾌ" ("Switch power off")

20
Marlin/language_kana_utf8.h
View file

@ -59,16 +59,16 @@
#define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets" #define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED "オフセットガテキヨウサレマシタ" // "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "オフセットガテキヨウサレマシタ" // "Offsets applied"
#define MSG_SET_ORIGIN "キジュンセット" // "Set origin" #define MSG_SET_ORIGIN "キジュンセット" // "Set origin"
#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA" #define MSG_PREHEAT_1 "PLA ヨネツ" // "Preheat PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " " #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All" #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " スベテ" // " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // " Bed" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " ベッド" // " Bed"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // " conf" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " セッテイ" // " conf"
#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS" #define MSG_PREHEAT_2 "ABS ヨネツ" // "Preheat ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " " #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All" #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " スベテ" // " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // " Bed" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " ベッド" // " Bed"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セッテイ" // " conf" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " セッテイ" // " conf"
#define MSG_COOLDOWN "カネツテイシ" // "Cooldown" #define MSG_COOLDOWN "カネツテイシ" // "Cooldown"
#define MSG_SWITCH_PS_ON "デンゲン オン" // "Switch power on" #define MSG_SWITCH_PS_ON "デンゲン オン" // "Switch power on"
#define MSG_SWITCH_PS_OFF "デンゲン オフ" // "Switch power off" #define MSG_SWITCH_PS_OFF "デンゲン オフ" // "Switch power off"

20
Marlin/language_nl.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Zet home offsets" #define MSG_SET_HOME_OFFSETS "Zet home offsets"
#define MSG_HOME_OFFSETS_APPLIED "H offset toegep." #define MSG_HOME_OFFSETS_APPLIED "H offset toegep."
#define MSG_SET_ORIGIN "Nulpunt instellen" #define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen" #define MSG_PREHEAT_1 "PLA voorverwarmen"
#define MSG_PREHEAT_PLA_N "PLA voorverw. " #define MSG_PREHEAT_1_N "PLA voorverw. "
#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan" #define MSG_PREHEAT_1_ALL "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed" #define MSG_PREHEAT_1_BEDONLY "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf" #define MSG_PREHEAT_1_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_ABS "ABS voorverwarmen" #define MSG_PREHEAT_2 "ABS voorverwarmen"
#define MSG_PREHEAT_ABS_N "ABS voorverw. " #define MSG_PREHEAT_2_N "ABS voorverw. "
#define MSG_PREHEAT_ABS_ALL "ABS voorverw. aan" #define MSG_PREHEAT_2_ALL "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed" #define MSG_PREHEAT_2_BEDONLY "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf" #define MSG_PREHEAT_2_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen" #define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan" #define MSG_SWITCH_PS_ON "Stroom aan"
#define MSG_SWITCH_PS_OFF "Stroom uit" #define MSG_SWITCH_PS_OFF "Stroom uit"

20
Marlin/language_pl.h
View file

@ -51,16 +51,16 @@
#define MSG_SET_HOME_OFFSETS "Ust. poz. zer." #define MSG_SET_HOME_OFFSETS "Ust. poz. zer."
#define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust." #define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust."
#define MSG_SET_ORIGIN "Ustaw punkt zero" #define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA" #define MSG_PREHEAT_1 "Rozgrzej PLA"
#define MSG_PREHEAT_PLA_N "Rozgrzej PLA " #define MSG_PREHEAT_1_N "Rozgrzej PLA "
#define MSG_PREHEAT_PLA_ALL "Roz. PLA Wszystko" #define MSG_PREHEAT_1_ALL "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze" #define MSG_PREHEAT_1_BEDONLY "Rozgrzej PLA Loze"
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA" #define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_2 "Rozgrzej ABS"
#define MSG_PREHEAT_ABS_N "Rozgrzej ABS " #define MSG_PREHEAT_2_N "Rozgrzej ABS "
#define MSG_PREHEAT_ABS_ALL "Roz. ABS Wszystko" #define MSG_PREHEAT_2_ALL "Roz. ABS Wszystko"
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze" #define MSG_PREHEAT_2_BEDONLY "Rozgrzej ABS Loze"
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS" #define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS"
#define MSG_H1 "1" #define MSG_H1 "1"
#define MSG_H2 "2" #define MSG_H2 "2"
#define MSG_H3 "3" #define MSG_H3 "3"

20
Marlin/language_pt-br.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Ajustar Jogo" #define MSG_SET_HOME_OFFSETS "Ajustar Jogo"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Ajustar orig." #define MSG_SET_ORIGIN "Ajustar orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_1 "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" #define MSG_PREHEAT_1_N "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_ALL "Pre-aq.Todo PLA" #define MSG_PREHEAT_1_ALL "Pre-aq.Todo PLA"
#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar PLA" #define MSG_PREHEAT_1_SETTINGS "Ajustar PLA"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_2 "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS" #define MSG_PREHEAT_2_N "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_ALL "Pre-aq.Todo ABS" #define MSG_PREHEAT_2_ALL "Pre-aq.Todo ABS"
#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar ABS" #define MSG_PREHEAT_2_SETTINGS "Ajustar ABS"
#define MSG_COOLDOWN "Esfriar" #define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_ON "Ligar"
#define MSG_SWITCH_PS_OFF "Desligar" #define MSG_SWITCH_PS_OFF "Desligar"

20
Marlin/language_pt-br_utf8.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Ajustar Jogo" #define MSG_SET_HOME_OFFSETS "Ajustar Jogo"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Ajustar orig." #define MSG_SET_ORIGIN "Ajustar orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_1 "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" #define MSG_PREHEAT_1_N "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_ALL "Pre-aq.Todo PLA" #define MSG_PREHEAT_1_ALL "Pre-aq.Todo PLA"
#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar PLA" #define MSG_PREHEAT_1_SETTINGS "Ajustar PLA"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_2 "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS" #define MSG_PREHEAT_2_N "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_ALL "Pre-aq.Todo ABS" #define MSG_PREHEAT_2_ALL "Pre-aq.Todo ABS"
#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar ABS" #define MSG_PREHEAT_2_SETTINGS "Ajustar ABS"
#define MSG_COOLDOWN "Esfriar" #define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_ON "Ligar"
#define MSG_SWITCH_PS_OFF "Desligar" #define MSG_SWITCH_PS_OFF "Desligar"

20
Marlin/language_pt.h
View file

@ -53,16 +53,16 @@
#define MSG_SET_HOME_OFFSETS "Definir desvio" #define MSG_SET_HOME_OFFSETS "Definir desvio"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Definir origem" #define MSG_SET_ORIGIN "Definir origem"
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_1 "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" #define MSG_PREHEAT_1_N "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo" #define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_PLA_SETTINGS "Definicoes PLA" #define MSG_PREHEAT_1_SETTINGS "Definicoes PLA"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_2 "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS " #define MSG_PREHEAT_2_N "Pre-aquecer ABS "
#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo" #define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_ABS_SETTINGS "Definicoes ABS" #define MSG_PREHEAT_2_SETTINGS "Definicoes ABS"
#define MSG_COOLDOWN "Arrefecer" #define MSG_COOLDOWN "Arrefecer"
#define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_ON "Ligar"
#define MSG_SWITCH_PS_OFF "Desligar" #define MSG_SWITCH_PS_OFF "Desligar"

20
Marlin/language_pt_utf8.h
View file

@ -53,16 +53,16 @@
#define MSG_SET_HOME_OFFSETS "Definir desvio" #define MSG_SET_HOME_OFFSETS "Definir desvio"
#define MSG_HOME_OFFSETS_APPLIED "Offsets aplicados" #define MSG_HOME_OFFSETS_APPLIED "Offsets aplicados"
#define MSG_SET_ORIGIN "Definir origem" #define MSG_SET_ORIGIN "Definir origem"
#define MSG_PREHEAT_PLA "Pre-aquecer PLA" #define MSG_PREHEAT_1 "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA" #define MSG_PREHEAT_1_N "Pre-aquecer PLA"
#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo" #define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo"
#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_PLA_SETTINGS "Definições PLA" #define MSG_PREHEAT_1_SETTINGS "Definições PLA"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS" #define MSG_PREHEAT_2 "Pre-aquecer ABS"
#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS " #define MSG_PREHEAT_2_N "Pre-aquecer ABS "
#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo" #define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo"
#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" #define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base"
#define MSG_PREHEAT_ABS_SETTINGS "Definições ABS" #define MSG_PREHEAT_2_SETTINGS "Definições ABS"
#define MSG_COOLDOWN "Arrefecer" #define MSG_COOLDOWN "Arrefecer"
#define MSG_SWITCH_PS_ON "Ligar" #define MSG_SWITCH_PS_ON "Ligar"
#define MSG_SWITCH_PS_OFF "Desligar" #define MSG_SWITCH_PS_OFF "Desligar"

20
Marlin/language_ru.h
View file

@ -49,16 +49,16 @@
#define MSG_SET_HOME_OFFSETS "Запомнить парковку" #define MSG_SET_HOME_OFFSETS "Запомнить парковку"
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Запомнить ноль" #define MSG_SET_ORIGIN "Запомнить ноль"
#define MSG_PREHEAT_PLA "Преднагрев PLA" #define MSG_PREHEAT_1 "Преднагрев PLA"
#define MSG_PREHEAT_PLA_N "Греть PLA Сопло " #define MSG_PREHEAT_1_N "Греть PLA Сопло "
#define MSG_PREHEAT_PLA_ALL "Греть PLA Все" #define MSG_PREHEAT_1_ALL "Греть PLA Все"
#define MSG_PREHEAT_PLA_BEDONLY "Греть PLA Стол" #define MSG_PREHEAT_1_BEDONLY "Греть PLA Стол"
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" #define MSG_PREHEAT_1_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_ABS "Преднагрев ABS" #define MSG_PREHEAT_2 "Преднагрев ABS"
#define MSG_PREHEAT_ABS_N "Греть ABS Сопло " #define MSG_PREHEAT_2_N "Греть ABS Сопло "
#define MSG_PREHEAT_ABS_ALL "Греть ABS Все" #define MSG_PREHEAT_2_ALL "Греть ABS Все"
#define MSG_PREHEAT_ABS_BEDONLY "Греть ABS Стол" #define MSG_PREHEAT_2_BEDONLY "Греть ABS Стол"
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" #define MSG_PREHEAT_2_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждение" #define MSG_COOLDOWN "Охлаждение"
#define MSG_SWITCH_PS_ON "Включить Питание" #define MSG_SWITCH_PS_ON "Включить Питание"
#define MSG_SWITCH_PS_OFF "Отключить Питание" #define MSG_SWITCH_PS_OFF "Отключить Питание"

12
Marlin/language_test.h
View file

@ -141,8 +141,8 @@
#define MSG_DISABLE_STEPPERS STRG_C2_8 #define MSG_DISABLE_STEPPERS STRG_C2_8
#define MSG_AUTO_HOME STRG_C2_9 #define MSG_AUTO_HOME STRG_C2_9
#define MSG_SET_HOME_OFFSETS STRG_C2_a #define MSG_SET_HOME_OFFSETS STRG_C2_a
#define MSG_PREHEAT_PLA STRG_C2_b #define MSG_PREHEAT_1 STRG_C2_b
#define MSG_PREHEAT_ABS STRG_C3_8 #define MSG_PREHEAT_2 STRG_C3_8
#define MSG_COOLDOWN STRG_C3_9 #define MSG_COOLDOWN STRG_C3_9
#define MSG_SWITCH_PS_OFF STRG_C3_a #define MSG_SWITCH_PS_OFF STRG_C3_a
#define MSG_MOVE_AXIS STRG_C3_b #define MSG_MOVE_AXIS STRG_C3_b
@ -176,8 +176,8 @@
#define MSG_DISABLE_STEPPERS STRG_D0_8 #define MSG_DISABLE_STEPPERS STRG_D0_8
#define MSG_AUTO_HOME STRG_D0_9 #define MSG_AUTO_HOME STRG_D0_9
#define MSG_SET_HOME_OFFSETS STRG_D0_a #define MSG_SET_HOME_OFFSETS STRG_D0_a
#define MSG_PREHEAT_PLA STRG_D0_b #define MSG_PREHEAT_1 STRG_D0_b
#define MSG_PREHEAT_ABS STRG_D1_8 #define MSG_PREHEAT_2 STRG_D1_8
#define MSG_COOLDOWN STRG_D1_9 #define MSG_COOLDOWN STRG_D1_9
#define MSG_SWITCH_PS_OFF STRG_D1_a #define MSG_SWITCH_PS_OFF STRG_D1_a
#define MSG_MOVE_AXIS STRG_D1_b #define MSG_MOVE_AXIS STRG_D1_b
@ -211,8 +211,8 @@
#define MSG_DISABLE_STEPPERS STRG_E382_8 #define MSG_DISABLE_STEPPERS STRG_E382_8
#define MSG_AUTO_HOME STRG_E382_9 #define MSG_AUTO_HOME STRG_E382_9
#define MSG_SET_HOME_OFFSETS STRG_E382_a #define MSG_SET_HOME_OFFSETS STRG_E382_a
#define MSG_PREHEAT_PLA STRG_E382_b #define MSG_PREHEAT_1 STRG_E382_b
#define MSG_PREHEAT_ABS STRG_E383_8 #define MSG_PREHEAT_2 STRG_E383_8
#define MSG_COOLDOWN STRG_E383_9 #define MSG_COOLDOWN STRG_E383_9
#define MSG_SWITCH_PS_OFF STRG_E383_a #define MSG_SWITCH_PS_OFF STRG_E383_a
#define MSG_MOVE_AXIS STRG_E383_b #define MSG_MOVE_AXIS STRG_E383_b

93
Marlin/ultralcd.cpp
View file

@ -33,13 +33,8 @@
#include "printcounter.h" #include "printcounter.h"
#endif #endif
int plaPreheatHotendTemp; int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1,
int plaPreheatHPBTemp; preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2;
int plaPreheatFanSpeed;
int absPreheatHotendTemp;
int absPreheatHPBTemp;
int absPreheatFanSpeed;
#if ENABLED(FILAMENT_LCD_DISPLAY) #if ENABLED(FILAMENT_LCD_DISPLAY)
millis_t previous_lcd_status_ms = 0; millis_t previous_lcd_status_ms = 0;
@ -849,29 +844,29 @@ static void lcd_status_screen() {
} }
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
void lcd_preheat_pla0() { _lcd_preheat(0, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } void lcd_preheat_pla0() { _lcd_preheat(0, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs0() { _lcd_preheat(0, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } void lcd_preheat_abs0() { _lcd_preheat(0, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
void lcd_preheat_pla1() { _lcd_preheat(1, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } void lcd_preheat_pla1() { _lcd_preheat(1, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs1() { _lcd_preheat(1, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } void lcd_preheat_abs1() { _lcd_preheat(1, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
#if HOTENDS > 2 #if HOTENDS > 2
void lcd_preheat_pla2() { _lcd_preheat(2, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } void lcd_preheat_pla2() { _lcd_preheat(2, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs2() { _lcd_preheat(2, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } void lcd_preheat_abs2() { _lcd_preheat(2, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
#if HOTENDS > 3 #if HOTENDS > 3
void lcd_preheat_pla3() { _lcd_preheat(3, plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed); } void lcd_preheat_pla3() { _lcd_preheat(3, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs3() { _lcd_preheat(3, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed); } void lcd_preheat_abs3() { _lcd_preheat(3, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); }
#endif #endif
#endif #endif
void lcd_preheat_pla0123() { void lcd_preheat_pla0123() {
#if HOTENDS > 1 #if HOTENDS > 1
thermalManager.setTargetHotend(plaPreheatHotendTemp, 1); thermalManager.setTargetHotend(preheatHotendTemp1, 1);
#if HOTENDS > 2 #if HOTENDS > 2
thermalManager.setTargetHotend(plaPreheatHotendTemp, 2); thermalManager.setTargetHotend(preheatHotendTemp1, 2);
#if HOTENDS > 3 #if HOTENDS > 3
thermalManager.setTargetHotend(plaPreheatHotendTemp, 3); thermalManager.setTargetHotend(preheatHotendTemp1, 3);
#endif #endif
#endif #endif
#endif #endif
@ -879,11 +874,11 @@ static void lcd_status_screen() {
} }
void lcd_preheat_abs0123() { void lcd_preheat_abs0123() {
#if HOTENDS > 1 #if HOTENDS > 1
thermalManager.setTargetHotend(absPreheatHotendTemp, 1); thermalManager.setTargetHotend(preheatHotendTemp2, 1);
#if HOTENDS > 2 #if HOTENDS > 2
thermalManager.setTargetHotend(absPreheatHotendTemp, 2); thermalManager.setTargetHotend(preheatHotendTemp2, 2);
#if HOTENDS > 3 #if HOTENDS > 3
thermalManager.setTargetHotend(absPreheatHotendTemp, 3); thermalManager.setTargetHotend(preheatHotendTemp2, 3);
#endif #endif
#endif #endif
#endif #endif
@ -893,8 +888,8 @@ static void lcd_status_screen() {
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, plaPreheatHPBTemp, plaPreheatFanSpeed); } void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, preheatBedTemp1, preheatFanSpeed1); }
void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, absPreheatHPBTemp, absPreheatFanSpeed); } void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, preheatBedTemp2, preheatFanSpeed2); }
#endif #endif
#if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0) #if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0)
@ -903,20 +898,20 @@ static void lcd_status_screen() {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_PREPARE); MENU_ITEM(back, MSG_PREPARE);
#if HOTENDS == 1 #if HOTENDS == 1
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_pla0);
#else #else
MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H1, lcd_preheat_pla0); MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_pla0);
MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H2, lcd_preheat_pla1); MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_pla1);
#if HOTENDS > 2 #if HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H3, lcd_preheat_pla2); MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_pla2);
#if HOTENDS > 3 #if HOTENDS > 3
MENU_ITEM(function, MSG_PREHEAT_PLA_N MSG_H4, lcd_preheat_pla3); MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_pla3);
#endif #endif
#endif #endif
MENU_ITEM(function, MSG_PREHEAT_PLA_ALL, lcd_preheat_pla0123); MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_pla0123);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_pla_bedonly);
#endif #endif
END_MENU(); END_MENU();
} }
@ -925,20 +920,20 @@ static void lcd_status_screen() {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_PREPARE); MENU_ITEM(back, MSG_PREPARE);
#if HOTENDS == 1 #if HOTENDS == 1
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_abs0);
#else #else
MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H1, lcd_preheat_abs0); MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_abs0);
MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H2, lcd_preheat_abs1); MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_abs1);
#if HOTENDS > 2 #if HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H3, lcd_preheat_abs2); MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_abs2);
#if HOTENDS > 3 #if HOTENDS > 3
MENU_ITEM(function, MSG_PREHEAT_ABS_N MSG_H4, lcd_preheat_abs3); MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_abs3);
#endif #endif
#endif #endif
MENU_ITEM(function, MSG_PREHEAT_ABS_ALL, lcd_preheat_abs0123); MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_abs0123);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_abs_bedonly);
#endif #endif
END_MENU(); END_MENU();
} }
@ -1222,11 +1217,11 @@ static void lcd_status_screen() {
// //
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0
MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_pla_menu);
MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu); MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_abs_menu);
#else #else
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_pla0);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_abs0);
#endif #endif
#endif #endif
@ -1685,12 +1680,12 @@ static void lcd_status_screen() {
// //
// Preheat PLA conf // Preheat PLA conf
// //
MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
// //
// Preheat ABS conf // Preheat ABS conf
// //
MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
END_MENU(); END_MENU();
} }
@ -1702,12 +1697,12 @@ static void lcd_status_screen() {
static void lcd_control_temperature_preheat_pla_settings_menu() { static void lcd_control_temperature_preheat_pla_settings_menu() {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE); MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed1, 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp1, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp1, BED_MINTEMP, BED_MAXTEMP - 15);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
@ -1723,12 +1718,12 @@ static void lcd_status_screen() {
static void lcd_control_temperature_preheat_abs_settings_menu() { static void lcd_control_temperature_preheat_abs_settings_menu() {
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE); MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed2, 0, 255);
#if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp2, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif #endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp2, BED_MINTEMP, BED_MAXTEMP - 15);
#endif #endif
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);

12
Marlin/ultralcd.h
View file

@ -88,12 +88,12 @@
FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_buttons_update() {}
#endif #endif
extern int plaPreheatHotendTemp; extern int preheatHotendTemp1;
extern int plaPreheatHPBTemp; extern int preheatBedTemp1;
extern int plaPreheatFanSpeed; extern int preheatFanSpeed1;
extern int absPreheatHotendTemp; extern int preheatHotendTemp2;
extern int absPreheatHPBTemp; extern int preheatBedTemp2;
extern int absPreheatFanSpeed; extern int preheatFanSpeed2;
#if ENABLED(FILAMENT_LCD_DISPLAY) #if ENABLED(FILAMENT_LCD_DISPLAY)
extern millis_t previous_lcd_status_ms; extern millis_t previous_lcd_status_ms;