zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Remove Z2 pins overrides from Configuration_adv.h

Browse source
This commit is contained in:
Scott Lahteine 2015-08-27 18:06:15 -07:00 committed by Richard Wackerbarth
parent f7f6b5faae
commit 11a065c0ca
14 changed files with 0 additions and 56 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/Configuration_adv.h
View file

@ -144,10 +144,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/configurator/config/Configuration_adv.h
View file

@ -144,10 +144,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/Felix/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/Hephestos/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/K8200/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/RigidBot/Configuration_adv.h
View file

@ -144,10 +144,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/SCARA/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/TAZ4/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/WITBOX/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/delta/generic/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/makibox/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

4
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View file

@ -152,10 +152,6 @@
// Play a little bit with small adjustments (0.5mm) and check the behaviour. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
// The M119 (endstops report) will start reporting the Z2 Endstop as well. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
#define Z2_DIR_PIN E2_DIR_PIN
#define Z2_ENABLE_PIN E2_ENABLE_PIN
// #define Z_DUAL_ENDSTOPS // #define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)